1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * spcp8x5 USB to serial adaptor driver 4 * 5 * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) 6 * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) 7 * Copyright (C) 2006 S1 Corp. 8 * 9 * Original driver for 2.6.10 pl2303 driver by 10 * Greg Kroah-Hartman (greg@kroah.com) 11 * Changes for 2.6.20 by Harald Klein <hari@vt100.at> 12 */ 13 #include <linux/kernel.h> 14 #include <linux/errno.h> 15 #include <linux/slab.h> 16 #include <linux/tty.h> 17 #include <linux/tty_driver.h> 18 #include <linux/tty_flip.h> 19 #include <linux/module.h> 20 #include <linux/spinlock.h> 21 #include <linux/usb.h> 22 #include <linux/usb/serial.h> 23 24 #define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" 25 26 #define SPCP825_QUIRK_NO_UART_STATUS 0x01 27 #define SPCP825_QUIRK_NO_WORK_MODE 0x02 28 29 #define SPCP8x5_007_VID 0x04FC 30 #define SPCP8x5_007_PID 0x0201 31 #define SPCP8x5_008_VID 0x04fc 32 #define SPCP8x5_008_PID 0x0235 33 #define SPCP8x5_PHILIPS_VID 0x0471 34 #define SPCP8x5_PHILIPS_PID 0x081e 35 #define SPCP8x5_INTERMATIC_VID 0x04FC 36 #define SPCP8x5_INTERMATIC_PID 0x0204 37 #define SPCP8x5_835_VID 0x04fc 38 #define SPCP8x5_835_PID 0x0231 39 40 static const struct usb_device_id id_table[] = { 41 { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, 42 { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, 43 { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, 44 { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, 45 { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), 46 .driver_info = SPCP825_QUIRK_NO_UART_STATUS | 47 SPCP825_QUIRK_NO_WORK_MODE }, 48 { } /* Terminating entry */ 49 }; 50 MODULE_DEVICE_TABLE(usb, id_table); 51 52 struct spcp8x5_usb_ctrl_arg { 53 u8 type; 54 u8 cmd; 55 u8 cmd_type; 56 u16 value; 57 u16 index; 58 u16 length; 59 }; 60 61 62 /* spcp8x5 spec register define */ 63 #define MCR_CONTROL_LINE_RTS 0x02 64 #define MCR_CONTROL_LINE_DTR 0x01 65 #define MCR_DTR 0x01 66 #define MCR_RTS 0x02 67 68 #define MSR_STATUS_LINE_DCD 0x80 69 #define MSR_STATUS_LINE_RI 0x40 70 #define MSR_STATUS_LINE_DSR 0x20 71 #define MSR_STATUS_LINE_CTS 0x10 72 73 /* verdor command here , we should define myself */ 74 #define SET_DEFAULT 0x40 75 #define SET_DEFAULT_TYPE 0x20 76 77 #define SET_UART_FORMAT 0x40 78 #define SET_UART_FORMAT_TYPE 0x21 79 #define SET_UART_FORMAT_SIZE_5 0x00 80 #define SET_UART_FORMAT_SIZE_6 0x01 81 #define SET_UART_FORMAT_SIZE_7 0x02 82 #define SET_UART_FORMAT_SIZE_8 0x03 83 #define SET_UART_FORMAT_STOP_1 0x00 84 #define SET_UART_FORMAT_STOP_2 0x04 85 #define SET_UART_FORMAT_PAR_NONE 0x00 86 #define SET_UART_FORMAT_PAR_ODD 0x10 87 #define SET_UART_FORMAT_PAR_EVEN 0x30 88 #define SET_UART_FORMAT_PAR_MASK 0xD0 89 #define SET_UART_FORMAT_PAR_SPACE 0x90 90 91 #define GET_UART_STATUS_TYPE 0xc0 92 #define GET_UART_STATUS 0x22 93 #define GET_UART_STATUS_MSR 0x06 94 95 #define SET_UART_STATUS 0x40 96 #define SET_UART_STATUS_TYPE 0x23 97 #define SET_UART_STATUS_MCR 0x0004 98 #define SET_UART_STATUS_MCR_DTR 0x01 99 #define SET_UART_STATUS_MCR_RTS 0x02 100 #define SET_UART_STATUS_MCR_LOOP 0x10 101 102 #define SET_WORKING_MODE 0x40 103 #define SET_WORKING_MODE_TYPE 0x24 104 #define SET_WORKING_MODE_U2C 0x00 105 #define SET_WORKING_MODE_RS485 0x01 106 #define SET_WORKING_MODE_PDMA 0x02 107 #define SET_WORKING_MODE_SPP 0x03 108 109 #define SET_FLOWCTL_CHAR 0x40 110 #define SET_FLOWCTL_CHAR_TYPE 0x25 111 112 #define GET_VERSION 0xc0 113 #define GET_VERSION_TYPE 0x26 114 115 #define SET_REGISTER 0x40 116 #define SET_REGISTER_TYPE 0x27 117 118 #define GET_REGISTER 0xc0 119 #define GET_REGISTER_TYPE 0x28 120 121 #define SET_RAM 0x40 122 #define SET_RAM_TYPE 0x31 123 124 #define GET_RAM 0xc0 125 #define GET_RAM_TYPE 0x32 126 127 /* how come ??? */ 128 #define UART_STATE 0x08 129 #define UART_STATE_TRANSIENT_MASK 0x75 130 #define UART_DCD 0x01 131 #define UART_DSR 0x02 132 #define UART_BREAK_ERROR 0x04 133 #define UART_RING 0x08 134 #define UART_FRAME_ERROR 0x10 135 #define UART_PARITY_ERROR 0x20 136 #define UART_OVERRUN_ERROR 0x40 137 #define UART_CTS 0x80 138 139 struct spcp8x5_private { 140 unsigned quirks; 141 spinlock_t lock; 142 u8 line_control; 143 }; 144 145 static int spcp8x5_probe(struct usb_serial *serial, 146 const struct usb_device_id *id) 147 { 148 usb_set_serial_data(serial, (void *)id); 149 150 return 0; 151 } 152 153 static int spcp8x5_port_probe(struct usb_serial_port *port) 154 { 155 const struct usb_device_id *id = usb_get_serial_data(port->serial); 156 struct spcp8x5_private *priv; 157 158 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 159 if (!priv) 160 return -ENOMEM; 161 162 spin_lock_init(&priv->lock); 163 priv->quirks = id->driver_info; 164 165 usb_set_serial_port_data(port, priv); 166 167 port->port.drain_delay = 256; 168 169 return 0; 170 } 171 172 static int spcp8x5_port_remove(struct usb_serial_port *port) 173 { 174 struct spcp8x5_private *priv; 175 176 priv = usb_get_serial_port_data(port); 177 kfree(priv); 178 179 return 0; 180 } 181 182 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) 183 { 184 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 185 struct usb_device *dev = port->serial->dev; 186 int retval; 187 188 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 189 return -EPERM; 190 191 retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 192 SET_UART_STATUS_TYPE, SET_UART_STATUS, 193 mcr, 0x04, NULL, 0, 100); 194 if (retval != 0) { 195 dev_err(&port->dev, "failed to set control lines: %d\n", 196 retval); 197 } 198 return retval; 199 } 200 201 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) 202 { 203 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 204 struct usb_device *dev = port->serial->dev; 205 u8 *buf; 206 int ret; 207 208 if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) 209 return -EPERM; 210 211 buf = kzalloc(1, GFP_KERNEL); 212 if (!buf) 213 return -ENOMEM; 214 215 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 216 GET_UART_STATUS, GET_UART_STATUS_TYPE, 217 0, GET_UART_STATUS_MSR, buf, 1, 100); 218 if (ret < 1) { 219 dev_err(&port->dev, "failed to get modem status: %d\n", ret); 220 if (ret >= 0) 221 ret = -EIO; 222 goto out; 223 } 224 225 dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf); 226 *status = *buf; 227 ret = 0; 228 out: 229 kfree(buf); 230 231 return ret; 232 } 233 234 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, 235 u16 index) 236 { 237 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 238 struct usb_device *dev = port->serial->dev; 239 int ret; 240 241 if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) 242 return; 243 244 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 245 SET_WORKING_MODE_TYPE, SET_WORKING_MODE, 246 value, index, NULL, 0, 100); 247 dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); 248 if (ret < 0) 249 dev_err(&port->dev, "failed to set work mode: %d\n", ret); 250 } 251 252 static int spcp8x5_carrier_raised(struct usb_serial_port *port) 253 { 254 u8 msr; 255 int ret; 256 257 ret = spcp8x5_get_msr(port, &msr); 258 if (ret || msr & MSR_STATUS_LINE_DCD) 259 return 1; 260 261 return 0; 262 } 263 264 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) 265 { 266 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 267 unsigned long flags; 268 u8 control; 269 270 spin_lock_irqsave(&priv->lock, flags); 271 if (on) 272 priv->line_control = MCR_CONTROL_LINE_DTR 273 | MCR_CONTROL_LINE_RTS; 274 else 275 priv->line_control &= ~ (MCR_CONTROL_LINE_DTR 276 | MCR_CONTROL_LINE_RTS); 277 control = priv->line_control; 278 spin_unlock_irqrestore(&priv->lock, flags); 279 spcp8x5_set_ctrl_line(port, control); 280 } 281 282 static void spcp8x5_init_termios(struct tty_struct *tty) 283 { 284 tty_encode_baud_rate(tty, 115200, 115200); 285 } 286 287 static void spcp8x5_set_termios(struct tty_struct *tty, 288 struct usb_serial_port *port, struct ktermios *old_termios) 289 { 290 struct usb_serial *serial = port->serial; 291 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 292 unsigned long flags; 293 unsigned int cflag = tty->termios.c_cflag; 294 unsigned short uartdata; 295 unsigned char buf[2] = {0, 0}; 296 int baud; 297 int i; 298 u8 control; 299 300 /* check that they really want us to change something */ 301 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) 302 return; 303 304 /* set DTR/RTS active */ 305 spin_lock_irqsave(&priv->lock, flags); 306 control = priv->line_control; 307 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { 308 priv->line_control |= MCR_DTR; 309 if (!(old_termios->c_cflag & CRTSCTS)) 310 priv->line_control |= MCR_RTS; 311 } 312 if (control != priv->line_control) { 313 control = priv->line_control; 314 spin_unlock_irqrestore(&priv->lock, flags); 315 spcp8x5_set_ctrl_line(port, control); 316 } else { 317 spin_unlock_irqrestore(&priv->lock, flags); 318 } 319 320 /* Set Baud Rate */ 321 baud = tty_get_baud_rate(tty); 322 switch (baud) { 323 case 300: buf[0] = 0x00; break; 324 case 600: buf[0] = 0x01; break; 325 case 1200: buf[0] = 0x02; break; 326 case 2400: buf[0] = 0x03; break; 327 case 4800: buf[0] = 0x04; break; 328 case 9600: buf[0] = 0x05; break; 329 case 19200: buf[0] = 0x07; break; 330 case 38400: buf[0] = 0x09; break; 331 case 57600: buf[0] = 0x0a; break; 332 case 115200: buf[0] = 0x0b; break; 333 case 230400: buf[0] = 0x0c; break; 334 case 460800: buf[0] = 0x0d; break; 335 case 921600: buf[0] = 0x0e; break; 336 /* case 1200000: buf[0] = 0x0f; break; */ 337 /* case 2400000: buf[0] = 0x10; break; */ 338 case 3000000: buf[0] = 0x11; break; 339 /* case 6000000: buf[0] = 0x12; break; */ 340 case 0: 341 case 1000000: 342 buf[0] = 0x0b; break; 343 default: 344 dev_err(&port->dev, "unsupported baudrate, using 9600\n"); 345 } 346 347 /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ 348 switch (cflag & CSIZE) { 349 case CS5: 350 buf[1] |= SET_UART_FORMAT_SIZE_5; 351 break; 352 case CS6: 353 buf[1] |= SET_UART_FORMAT_SIZE_6; 354 break; 355 case CS7: 356 buf[1] |= SET_UART_FORMAT_SIZE_7; 357 break; 358 default: 359 case CS8: 360 buf[1] |= SET_UART_FORMAT_SIZE_8; 361 break; 362 } 363 364 /* Set Stop bit2 : 0:1bit 1:2bit */ 365 buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : 366 SET_UART_FORMAT_STOP_1; 367 368 /* Set Parity bit3-4 01:Odd 11:Even */ 369 if (cflag & PARENB) { 370 buf[1] |= (cflag & PARODD) ? 371 SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; 372 } else { 373 buf[1] |= SET_UART_FORMAT_PAR_NONE; 374 } 375 uartdata = buf[0] | buf[1]<<8; 376 377 i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 378 SET_UART_FORMAT_TYPE, SET_UART_FORMAT, 379 uartdata, 0, NULL, 0, 100); 380 if (i < 0) 381 dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", 382 uartdata, i); 383 dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); 384 385 if (cflag & CRTSCTS) { 386 /* enable hardware flow control */ 387 spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); 388 } 389 } 390 391 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) 392 { 393 struct usb_serial *serial = port->serial; 394 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 395 int ret; 396 397 usb_clear_halt(serial->dev, port->write_urb->pipe); 398 usb_clear_halt(serial->dev, port->read_urb->pipe); 399 400 ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 401 0x09, 0x00, 402 0x01, 0x00, NULL, 0x00, 100); 403 if (ret) 404 return ret; 405 406 spcp8x5_set_ctrl_line(port, priv->line_control); 407 408 if (tty) 409 spcp8x5_set_termios(tty, port, NULL); 410 411 return usb_serial_generic_open(tty, port); 412 } 413 414 static int spcp8x5_tiocmset(struct tty_struct *tty, 415 unsigned int set, unsigned int clear) 416 { 417 struct usb_serial_port *port = tty->driver_data; 418 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 419 unsigned long flags; 420 u8 control; 421 422 spin_lock_irqsave(&priv->lock, flags); 423 if (set & TIOCM_RTS) 424 priv->line_control |= MCR_RTS; 425 if (set & TIOCM_DTR) 426 priv->line_control |= MCR_DTR; 427 if (clear & TIOCM_RTS) 428 priv->line_control &= ~MCR_RTS; 429 if (clear & TIOCM_DTR) 430 priv->line_control &= ~MCR_DTR; 431 control = priv->line_control; 432 spin_unlock_irqrestore(&priv->lock, flags); 433 434 return spcp8x5_set_ctrl_line(port, control); 435 } 436 437 static int spcp8x5_tiocmget(struct tty_struct *tty) 438 { 439 struct usb_serial_port *port = tty->driver_data; 440 struct spcp8x5_private *priv = usb_get_serial_port_data(port); 441 unsigned long flags; 442 unsigned int mcr; 443 u8 status; 444 unsigned int result; 445 446 result = spcp8x5_get_msr(port, &status); 447 if (result) 448 return result; 449 450 spin_lock_irqsave(&priv->lock, flags); 451 mcr = priv->line_control; 452 spin_unlock_irqrestore(&priv->lock, flags); 453 454 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) 455 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) 456 | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) 457 | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) 458 | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) 459 | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); 460 461 return result; 462 } 463 464 static struct usb_serial_driver spcp8x5_device = { 465 .driver = { 466 .owner = THIS_MODULE, 467 .name = "SPCP8x5", 468 }, 469 .id_table = id_table, 470 .num_ports = 1, 471 .num_bulk_in = 1, 472 .num_bulk_out = 1, 473 .open = spcp8x5_open, 474 .dtr_rts = spcp8x5_dtr_rts, 475 .carrier_raised = spcp8x5_carrier_raised, 476 .set_termios = spcp8x5_set_termios, 477 .init_termios = spcp8x5_init_termios, 478 .tiocmget = spcp8x5_tiocmget, 479 .tiocmset = spcp8x5_tiocmset, 480 .probe = spcp8x5_probe, 481 .port_probe = spcp8x5_port_probe, 482 .port_remove = spcp8x5_port_remove, 483 }; 484 485 static struct usb_serial_driver * const serial_drivers[] = { 486 &spcp8x5_device, NULL 487 }; 488 489 module_usb_serial_driver(serial_drivers, id_table); 490 491 MODULE_DESCRIPTION(DRIVER_DESC); 492 MODULE_LICENSE("GPL"); 493