1 /* 2 * Ours Technology Inc. OTi-6858 USB to serial adapter driver. 3 * 4 * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20) 5 * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail) 6 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 7 * Copyright (C) 2003 IBM Corp. 8 * 9 * Many thanks to the authors of pl2303 driver: all functions in this file 10 * are heavily based on pl2303 code, buffering code is a 1-to-1 copy. 11 * 12 * Warning! You use this driver on your own risk! The only official 13 * description of this device I have is datasheet from manufacturer, 14 * and it doesn't contain almost any information needed to write a driver. 15 * Almost all knowlegde used while writing this driver was gathered by: 16 * - analyzing traffic between device and the M$ Windows 2000 driver, 17 * - trying different bit combinations and checking pin states 18 * with a voltmeter, 19 * - receiving malformed frames and producing buffer overflows 20 * to learn how errors are reported, 21 * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE 22 * CONNECTED TO IT! 23 * 24 * This program is free software; you can redistribute it and/or modify 25 * it under the terms of the GNU General Public License as published by 26 * the Free Software Foundation; either version 2 of the License. 27 * 28 * See Documentation/usb/usb-serial.txt for more information on using this 29 * driver 30 * 31 * TODO: 32 * - implement correct flushing for ioctls and oti6858_close() 33 * - check how errors (rx overflow, parity error, framing error) are reported 34 * - implement oti6858_break_ctl() 35 * - implement more ioctls 36 * - test/implement flow control 37 * - allow setting custom baud rates 38 */ 39 40 #include <linux/kernel.h> 41 #include <linux/errno.h> 42 #include <linux/slab.h> 43 #include <linux/tty.h> 44 #include <linux/tty_driver.h> 45 #include <linux/tty_flip.h> 46 #include <linux/serial.h> 47 #include <linux/module.h> 48 #include <linux/moduleparam.h> 49 #include <linux/spinlock.h> 50 #include <linux/usb.h> 51 #include <linux/usb/serial.h> 52 #include <linux/uaccess.h> 53 #include <linux/kfifo.h> 54 #include "oti6858.h" 55 56 #define OTI6858_DESCRIPTION \ 57 "Ours Technology Inc. OTi-6858 USB to serial adapter driver" 58 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" 59 60 static const struct usb_device_id id_table[] = { 61 { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, 62 { } 63 }; 64 65 MODULE_DEVICE_TABLE(usb, id_table); 66 67 /* requests */ 68 #define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) 69 #define OTI6858_REQ_T_GET_STATUS 0x01 70 71 #define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00) 72 #define OTI6858_REQ_T_SET_LINE 0x00 73 74 #define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01) 75 #define OTI6858_REQ_T_CHECK_TXBUFF 0x00 76 77 /* format of the control packet */ 78 struct oti6858_control_pkt { 79 __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */ 80 #define OTI6858_MAX_BAUD_RATE 3000000 81 u8 frame_fmt; 82 #define FMT_STOP_BITS_MASK 0xc0 83 #define FMT_STOP_BITS_1 0x00 84 #define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */ 85 #define FMT_PARITY_MASK 0x38 86 #define FMT_PARITY_NONE 0x00 87 #define FMT_PARITY_ODD 0x08 88 #define FMT_PARITY_EVEN 0x18 89 #define FMT_PARITY_MARK 0x28 90 #define FMT_PARITY_SPACE 0x38 91 #define FMT_DATA_BITS_MASK 0x03 92 #define FMT_DATA_BITS_5 0x00 93 #define FMT_DATA_BITS_6 0x01 94 #define FMT_DATA_BITS_7 0x02 95 #define FMT_DATA_BITS_8 0x03 96 u8 something; /* always equals 0x43 */ 97 u8 control; /* settings of flow control lines */ 98 #define CONTROL_MASK 0x0c 99 #define CONTROL_DTR_HIGH 0x08 100 #define CONTROL_RTS_HIGH 0x04 101 u8 tx_status; 102 #define TX_BUFFER_EMPTIED 0x09 103 u8 pin_state; 104 #define PIN_MASK 0x3f 105 #define PIN_MSR_MASK 0x1b 106 #define PIN_RTS 0x20 /* output pin */ 107 #define PIN_CTS 0x10 /* input pin, active low */ 108 #define PIN_DSR 0x08 /* input pin, active low */ 109 #define PIN_DTR 0x04 /* output pin */ 110 #define PIN_RI 0x02 /* input pin, active low */ 111 #define PIN_DCD 0x01 /* input pin, active low */ 112 u8 rx_bytes_avail; /* number of bytes in rx buffer */; 113 }; 114 115 #define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt) 116 #define OTI6858_CTRL_EQUALS_PENDING(a, priv) \ 117 (((a)->divisor == (priv)->pending_setup.divisor) \ 118 && ((a)->control == (priv)->pending_setup.control) \ 119 && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt)) 120 121 /* function prototypes */ 122 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port); 123 static void oti6858_close(struct usb_serial_port *port); 124 static void oti6858_set_termios(struct tty_struct *tty, 125 struct usb_serial_port *port, struct ktermios *old); 126 static void oti6858_init_termios(struct tty_struct *tty); 127 static void oti6858_read_int_callback(struct urb *urb); 128 static void oti6858_read_bulk_callback(struct urb *urb); 129 static void oti6858_write_bulk_callback(struct urb *urb); 130 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, 131 const unsigned char *buf, int count); 132 static int oti6858_write_room(struct tty_struct *tty); 133 static int oti6858_chars_in_buffer(struct tty_struct *tty); 134 static int oti6858_tiocmget(struct tty_struct *tty); 135 static int oti6858_tiocmset(struct tty_struct *tty, 136 unsigned int set, unsigned int clear); 137 static int oti6858_port_probe(struct usb_serial_port *port); 138 static int oti6858_port_remove(struct usb_serial_port *port); 139 140 /* device info */ 141 static struct usb_serial_driver oti6858_device = { 142 .driver = { 143 .owner = THIS_MODULE, 144 .name = "oti6858", 145 }, 146 .id_table = id_table, 147 .num_ports = 1, 148 .open = oti6858_open, 149 .close = oti6858_close, 150 .write = oti6858_write, 151 .set_termios = oti6858_set_termios, 152 .init_termios = oti6858_init_termios, 153 .tiocmget = oti6858_tiocmget, 154 .tiocmset = oti6858_tiocmset, 155 .tiocmiwait = usb_serial_generic_tiocmiwait, 156 .read_bulk_callback = oti6858_read_bulk_callback, 157 .read_int_callback = oti6858_read_int_callback, 158 .write_bulk_callback = oti6858_write_bulk_callback, 159 .write_room = oti6858_write_room, 160 .chars_in_buffer = oti6858_chars_in_buffer, 161 .port_probe = oti6858_port_probe, 162 .port_remove = oti6858_port_remove, 163 }; 164 165 static struct usb_serial_driver * const serial_drivers[] = { 166 &oti6858_device, NULL 167 }; 168 169 struct oti6858_private { 170 spinlock_t lock; 171 172 struct oti6858_control_pkt status; 173 174 struct { 175 u8 read_urb_in_use; 176 u8 write_urb_in_use; 177 } flags; 178 struct delayed_work delayed_write_work; 179 180 struct { 181 __le16 divisor; 182 u8 frame_fmt; 183 u8 control; 184 } pending_setup; 185 u8 transient; 186 u8 setup_done; 187 struct delayed_work delayed_setup_work; 188 189 struct usb_serial_port *port; /* USB port with which associated */ 190 }; 191 192 static void setup_line(struct work_struct *work) 193 { 194 struct oti6858_private *priv = container_of(work, 195 struct oti6858_private, delayed_setup_work.work); 196 struct usb_serial_port *port = priv->port; 197 struct oti6858_control_pkt *new_setup; 198 unsigned long flags; 199 int result; 200 201 new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); 202 if (!new_setup) { 203 /* we will try again */ 204 schedule_delayed_work(&priv->delayed_setup_work, 205 msecs_to_jiffies(2)); 206 return; 207 } 208 209 result = usb_control_msg(port->serial->dev, 210 usb_rcvctrlpipe(port->serial->dev, 0), 211 OTI6858_REQ_T_GET_STATUS, 212 OTI6858_REQ_GET_STATUS, 213 0, 0, 214 new_setup, OTI6858_CTRL_PKT_SIZE, 215 100); 216 217 if (result != OTI6858_CTRL_PKT_SIZE) { 218 dev_err(&port->dev, "%s(): error reading status\n", __func__); 219 kfree(new_setup); 220 /* we will try again */ 221 schedule_delayed_work(&priv->delayed_setup_work, 222 msecs_to_jiffies(2)); 223 return; 224 } 225 226 spin_lock_irqsave(&priv->lock, flags); 227 if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) { 228 new_setup->divisor = priv->pending_setup.divisor; 229 new_setup->control = priv->pending_setup.control; 230 new_setup->frame_fmt = priv->pending_setup.frame_fmt; 231 232 spin_unlock_irqrestore(&priv->lock, flags); 233 result = usb_control_msg(port->serial->dev, 234 usb_sndctrlpipe(port->serial->dev, 0), 235 OTI6858_REQ_T_SET_LINE, 236 OTI6858_REQ_SET_LINE, 237 0, 0, 238 new_setup, OTI6858_CTRL_PKT_SIZE, 239 100); 240 } else { 241 spin_unlock_irqrestore(&priv->lock, flags); 242 result = 0; 243 } 244 kfree(new_setup); 245 246 spin_lock_irqsave(&priv->lock, flags); 247 if (result != OTI6858_CTRL_PKT_SIZE) 248 priv->transient = 0; 249 priv->setup_done = 1; 250 spin_unlock_irqrestore(&priv->lock, flags); 251 252 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 253 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 254 if (result != 0) { 255 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 256 __func__, result); 257 } 258 } 259 260 static void send_data(struct work_struct *work) 261 { 262 struct oti6858_private *priv = container_of(work, 263 struct oti6858_private, delayed_write_work.work); 264 struct usb_serial_port *port = priv->port; 265 int count = 0, result; 266 unsigned long flags; 267 u8 *allow; 268 269 spin_lock_irqsave(&priv->lock, flags); 270 if (priv->flags.write_urb_in_use) { 271 spin_unlock_irqrestore(&priv->lock, flags); 272 schedule_delayed_work(&priv->delayed_write_work, 273 msecs_to_jiffies(2)); 274 return; 275 } 276 priv->flags.write_urb_in_use = 1; 277 spin_unlock_irqrestore(&priv->lock, flags); 278 279 spin_lock_irqsave(&port->lock, flags); 280 count = kfifo_len(&port->write_fifo); 281 spin_unlock_irqrestore(&port->lock, flags); 282 283 if (count > port->bulk_out_size) 284 count = port->bulk_out_size; 285 286 if (count != 0) { 287 allow = kmalloc(1, GFP_KERNEL); 288 if (!allow) 289 return; 290 291 result = usb_control_msg(port->serial->dev, 292 usb_rcvctrlpipe(port->serial->dev, 0), 293 OTI6858_REQ_T_CHECK_TXBUFF, 294 OTI6858_REQ_CHECK_TXBUFF, 295 count, 0, allow, 1, 100); 296 if (result != 1 || *allow != 0) 297 count = 0; 298 kfree(allow); 299 } 300 301 if (count == 0) { 302 priv->flags.write_urb_in_use = 0; 303 304 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 305 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); 306 if (result != 0) { 307 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 308 __func__, result); 309 } 310 return; 311 } 312 313 count = kfifo_out_locked(&port->write_fifo, 314 port->write_urb->transfer_buffer, 315 count, &port->lock); 316 port->write_urb->transfer_buffer_length = count; 317 result = usb_submit_urb(port->write_urb, GFP_NOIO); 318 if (result != 0) { 319 dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n", 320 __func__, result); 321 priv->flags.write_urb_in_use = 0; 322 } 323 324 usb_serial_port_softint(port); 325 } 326 327 static int oti6858_port_probe(struct usb_serial_port *port) 328 { 329 struct oti6858_private *priv; 330 331 priv = kzalloc(sizeof(*priv), GFP_KERNEL); 332 if (!priv) 333 return -ENOMEM; 334 335 spin_lock_init(&priv->lock); 336 priv->port = port; 337 INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); 338 INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); 339 340 usb_set_serial_port_data(port, priv); 341 342 port->port.drain_delay = 256; /* FIXME: check the FIFO length */ 343 344 return 0; 345 } 346 347 static int oti6858_port_remove(struct usb_serial_port *port) 348 { 349 struct oti6858_private *priv; 350 351 priv = usb_get_serial_port_data(port); 352 kfree(priv); 353 354 return 0; 355 } 356 357 static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, 358 const unsigned char *buf, int count) 359 { 360 if (!count) 361 return count; 362 363 count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); 364 365 return count; 366 } 367 368 static int oti6858_write_room(struct tty_struct *tty) 369 { 370 struct usb_serial_port *port = tty->driver_data; 371 int room = 0; 372 unsigned long flags; 373 374 spin_lock_irqsave(&port->lock, flags); 375 room = kfifo_avail(&port->write_fifo); 376 spin_unlock_irqrestore(&port->lock, flags); 377 378 return room; 379 } 380 381 static int oti6858_chars_in_buffer(struct tty_struct *tty) 382 { 383 struct usb_serial_port *port = tty->driver_data; 384 int chars = 0; 385 unsigned long flags; 386 387 spin_lock_irqsave(&port->lock, flags); 388 chars = kfifo_len(&port->write_fifo); 389 spin_unlock_irqrestore(&port->lock, flags); 390 391 return chars; 392 } 393 394 static void oti6858_init_termios(struct tty_struct *tty) 395 { 396 tty->termios = tty_std_termios; 397 tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; 398 tty->termios.c_ispeed = 38400; 399 tty->termios.c_ospeed = 38400; 400 } 401 402 static void oti6858_set_termios(struct tty_struct *tty, 403 struct usb_serial_port *port, struct ktermios *old_termios) 404 { 405 struct oti6858_private *priv = usb_get_serial_port_data(port); 406 unsigned long flags; 407 unsigned int cflag; 408 u8 frame_fmt, control; 409 __le16 divisor; 410 int br; 411 412 cflag = tty->termios.c_cflag; 413 414 spin_lock_irqsave(&priv->lock, flags); 415 divisor = priv->pending_setup.divisor; 416 frame_fmt = priv->pending_setup.frame_fmt; 417 control = priv->pending_setup.control; 418 spin_unlock_irqrestore(&priv->lock, flags); 419 420 frame_fmt &= ~FMT_DATA_BITS_MASK; 421 switch (cflag & CSIZE) { 422 case CS5: 423 frame_fmt |= FMT_DATA_BITS_5; 424 break; 425 case CS6: 426 frame_fmt |= FMT_DATA_BITS_6; 427 break; 428 case CS7: 429 frame_fmt |= FMT_DATA_BITS_7; 430 break; 431 default: 432 case CS8: 433 frame_fmt |= FMT_DATA_BITS_8; 434 break; 435 } 436 437 /* manufacturer claims that this device can work with baud rates 438 * up to 3 Mbps; I've tested it only on 115200 bps, so I can't 439 * guarantee that any other baud rate will work (especially 440 * the higher ones) 441 */ 442 br = tty_get_baud_rate(tty); 443 if (br == 0) { 444 divisor = 0; 445 } else { 446 int real_br; 447 int new_divisor; 448 br = min(br, OTI6858_MAX_BAUD_RATE); 449 450 new_divisor = (96000000 + 8 * br) / (16 * br); 451 real_br = 96000000 / (16 * new_divisor); 452 divisor = cpu_to_le16(new_divisor); 453 tty_encode_baud_rate(tty, real_br, real_br); 454 } 455 456 frame_fmt &= ~FMT_STOP_BITS_MASK; 457 if ((cflag & CSTOPB) != 0) 458 frame_fmt |= FMT_STOP_BITS_2; 459 else 460 frame_fmt |= FMT_STOP_BITS_1; 461 462 frame_fmt &= ~FMT_PARITY_MASK; 463 if ((cflag & PARENB) != 0) { 464 if ((cflag & PARODD) != 0) 465 frame_fmt |= FMT_PARITY_ODD; 466 else 467 frame_fmt |= FMT_PARITY_EVEN; 468 } else { 469 frame_fmt |= FMT_PARITY_NONE; 470 } 471 472 control &= ~CONTROL_MASK; 473 if ((cflag & CRTSCTS) != 0) 474 control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH); 475 476 /* change control lines if we are switching to or from B0 */ 477 /* FIXME: 478 spin_lock_irqsave(&priv->lock, flags); 479 control = priv->line_control; 480 if ((cflag & CBAUD) == B0) 481 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); 482 else 483 priv->line_control |= (CONTROL_DTR | CONTROL_RTS); 484 if (control != priv->line_control) { 485 control = priv->line_control; 486 spin_unlock_irqrestore(&priv->lock, flags); 487 set_control_lines(serial->dev, control); 488 } else { 489 spin_unlock_irqrestore(&priv->lock, flags); 490 } 491 */ 492 493 spin_lock_irqsave(&priv->lock, flags); 494 if (divisor != priv->pending_setup.divisor 495 || control != priv->pending_setup.control 496 || frame_fmt != priv->pending_setup.frame_fmt) { 497 priv->pending_setup.divisor = divisor; 498 priv->pending_setup.control = control; 499 priv->pending_setup.frame_fmt = frame_fmt; 500 } 501 spin_unlock_irqrestore(&priv->lock, flags); 502 } 503 504 static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) 505 { 506 struct oti6858_private *priv = usb_get_serial_port_data(port); 507 struct usb_serial *serial = port->serial; 508 struct oti6858_control_pkt *buf; 509 unsigned long flags; 510 int result; 511 512 usb_clear_halt(serial->dev, port->write_urb->pipe); 513 usb_clear_halt(serial->dev, port->read_urb->pipe); 514 515 buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); 516 if (!buf) 517 return -ENOMEM; 518 519 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 520 OTI6858_REQ_T_GET_STATUS, 521 OTI6858_REQ_GET_STATUS, 522 0, 0, 523 buf, OTI6858_CTRL_PKT_SIZE, 524 100); 525 if (result != OTI6858_CTRL_PKT_SIZE) { 526 /* assume default (after power-on reset) values */ 527 buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */ 528 buf->frame_fmt = 0x03; /* 8N1 */ 529 buf->something = 0x43; 530 buf->control = 0x4c; /* DTR, RTS */ 531 buf->tx_status = 0x00; 532 buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */ 533 buf->rx_bytes_avail = 0x00; 534 } 535 536 spin_lock_irqsave(&priv->lock, flags); 537 memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE); 538 priv->pending_setup.divisor = buf->divisor; 539 priv->pending_setup.frame_fmt = buf->frame_fmt; 540 priv->pending_setup.control = buf->control; 541 spin_unlock_irqrestore(&priv->lock, flags); 542 kfree(buf); 543 544 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 545 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 546 if (result != 0) { 547 dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", 548 __func__, result); 549 oti6858_close(port); 550 return result; 551 } 552 553 /* setup termios */ 554 if (tty) 555 oti6858_set_termios(tty, port, NULL); 556 557 return 0; 558 } 559 560 static void oti6858_close(struct usb_serial_port *port) 561 { 562 struct oti6858_private *priv = usb_get_serial_port_data(port); 563 unsigned long flags; 564 565 spin_lock_irqsave(&port->lock, flags); 566 /* clear out any remaining data in the buffer */ 567 kfifo_reset_out(&port->write_fifo); 568 spin_unlock_irqrestore(&port->lock, flags); 569 570 dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__); 571 572 /* cancel scheduled setup */ 573 cancel_delayed_work_sync(&priv->delayed_setup_work); 574 cancel_delayed_work_sync(&priv->delayed_write_work); 575 576 /* shutdown our urbs */ 577 dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__); 578 usb_kill_urb(port->write_urb); 579 usb_kill_urb(port->read_urb); 580 usb_kill_urb(port->interrupt_in_urb); 581 } 582 583 static int oti6858_tiocmset(struct tty_struct *tty, 584 unsigned int set, unsigned int clear) 585 { 586 struct usb_serial_port *port = tty->driver_data; 587 struct oti6858_private *priv = usb_get_serial_port_data(port); 588 unsigned long flags; 589 u8 control; 590 591 dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n", 592 __func__, set, clear); 593 594 /* FIXME: check if this is correct (active high/low) */ 595 spin_lock_irqsave(&priv->lock, flags); 596 control = priv->pending_setup.control; 597 if ((set & TIOCM_RTS) != 0) 598 control |= CONTROL_RTS_HIGH; 599 if ((set & TIOCM_DTR) != 0) 600 control |= CONTROL_DTR_HIGH; 601 if ((clear & TIOCM_RTS) != 0) 602 control &= ~CONTROL_RTS_HIGH; 603 if ((clear & TIOCM_DTR) != 0) 604 control &= ~CONTROL_DTR_HIGH; 605 606 if (control != priv->pending_setup.control) 607 priv->pending_setup.control = control; 608 609 spin_unlock_irqrestore(&priv->lock, flags); 610 return 0; 611 } 612 613 static int oti6858_tiocmget(struct tty_struct *tty) 614 { 615 struct usb_serial_port *port = tty->driver_data; 616 struct oti6858_private *priv = usb_get_serial_port_data(port); 617 unsigned long flags; 618 unsigned pin_state; 619 unsigned result = 0; 620 621 spin_lock_irqsave(&priv->lock, flags); 622 pin_state = priv->status.pin_state & PIN_MASK; 623 spin_unlock_irqrestore(&priv->lock, flags); 624 625 /* FIXME: check if this is correct (active high/low) */ 626 if ((pin_state & PIN_RTS) != 0) 627 result |= TIOCM_RTS; 628 if ((pin_state & PIN_CTS) != 0) 629 result |= TIOCM_CTS; 630 if ((pin_state & PIN_DSR) != 0) 631 result |= TIOCM_DSR; 632 if ((pin_state & PIN_DTR) != 0) 633 result |= TIOCM_DTR; 634 if ((pin_state & PIN_RI) != 0) 635 result |= TIOCM_RI; 636 if ((pin_state & PIN_DCD) != 0) 637 result |= TIOCM_CD; 638 639 dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result); 640 641 return result; 642 } 643 644 static void oti6858_read_int_callback(struct urb *urb) 645 { 646 struct usb_serial_port *port = urb->context; 647 struct oti6858_private *priv = usb_get_serial_port_data(port); 648 int transient = 0, can_recv = 0, resubmit = 1; 649 int status = urb->status; 650 651 switch (status) { 652 case 0: 653 /* success */ 654 break; 655 case -ECONNRESET: 656 case -ENOENT: 657 case -ESHUTDOWN: 658 /* this urb is terminated, clean up */ 659 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", 660 __func__, status); 661 return; 662 default: 663 dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n", 664 __func__, status); 665 break; 666 } 667 668 if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) { 669 struct oti6858_control_pkt *xs = urb->transfer_buffer; 670 unsigned long flags; 671 672 spin_lock_irqsave(&priv->lock, flags); 673 674 if (!priv->transient) { 675 if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 676 if (xs->rx_bytes_avail == 0) { 677 priv->transient = 4; 678 priv->setup_done = 0; 679 resubmit = 0; 680 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); 681 schedule_delayed_work(&priv->delayed_setup_work, 0); 682 } 683 } 684 } else { 685 if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { 686 priv->transient = 0; 687 } else if (!priv->setup_done) { 688 resubmit = 0; 689 } else if (--priv->transient == 0) { 690 if (xs->rx_bytes_avail == 0) { 691 priv->transient = 4; 692 priv->setup_done = 0; 693 resubmit = 0; 694 dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); 695 schedule_delayed_work(&priv->delayed_setup_work, 0); 696 } 697 } 698 } 699 700 if (!priv->transient) { 701 u8 delta = xs->pin_state ^ priv->status.pin_state; 702 703 if (delta & PIN_MSR_MASK) { 704 if (delta & PIN_CTS) 705 port->icount.cts++; 706 if (delta & PIN_DSR) 707 port->icount.dsr++; 708 if (delta & PIN_RI) 709 port->icount.rng++; 710 if (delta & PIN_DCD) 711 port->icount.dcd++; 712 713 wake_up_interruptible(&port->port.delta_msr_wait); 714 } 715 716 memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); 717 } 718 719 if (!priv->transient && xs->rx_bytes_avail != 0) { 720 can_recv = xs->rx_bytes_avail; 721 priv->flags.read_urb_in_use = 1; 722 } 723 724 transient = priv->transient; 725 spin_unlock_irqrestore(&priv->lock, flags); 726 } 727 728 if (can_recv) { 729 int result; 730 731 result = usb_submit_urb(port->read_urb, GFP_ATOMIC); 732 if (result != 0) { 733 priv->flags.read_urb_in_use = 0; 734 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 735 " error %d\n", __func__, result); 736 } else { 737 resubmit = 0; 738 } 739 } else if (!transient) { 740 unsigned long flags; 741 int count; 742 743 spin_lock_irqsave(&port->lock, flags); 744 count = kfifo_len(&port->write_fifo); 745 spin_unlock_irqrestore(&port->lock, flags); 746 747 spin_lock_irqsave(&priv->lock, flags); 748 if (priv->flags.write_urb_in_use == 0 && count != 0) { 749 schedule_delayed_work(&priv->delayed_write_work, 0); 750 resubmit = 0; 751 } 752 spin_unlock_irqrestore(&priv->lock, flags); 753 } 754 755 if (resubmit) { 756 int result; 757 758 /* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */ 759 result = usb_submit_urb(urb, GFP_ATOMIC); 760 if (result != 0) { 761 dev_err(&urb->dev->dev, 762 "%s(): usb_submit_urb() failed with" 763 " error %d\n", __func__, result); 764 } 765 } 766 } 767 768 static void oti6858_read_bulk_callback(struct urb *urb) 769 { 770 struct usb_serial_port *port = urb->context; 771 struct oti6858_private *priv = usb_get_serial_port_data(port); 772 unsigned char *data = urb->transfer_buffer; 773 unsigned long flags; 774 int status = urb->status; 775 int result; 776 777 spin_lock_irqsave(&priv->lock, flags); 778 priv->flags.read_urb_in_use = 0; 779 spin_unlock_irqrestore(&priv->lock, flags); 780 781 if (status != 0) { 782 dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__); 783 return; 784 } 785 786 if (urb->actual_length > 0) { 787 tty_insert_flip_string(&port->port, data, urb->actual_length); 788 tty_flip_buffer_push(&port->port); 789 } 790 791 /* schedule the interrupt urb */ 792 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 793 if (result != 0 && result != -EPERM) { 794 dev_err(&port->dev, "%s(): usb_submit_urb() failed," 795 " error %d\n", __func__, result); 796 } 797 } 798 799 static void oti6858_write_bulk_callback(struct urb *urb) 800 { 801 struct usb_serial_port *port = urb->context; 802 struct oti6858_private *priv = usb_get_serial_port_data(port); 803 int status = urb->status; 804 int result; 805 806 switch (status) { 807 case 0: 808 /* success */ 809 break; 810 case -ECONNRESET: 811 case -ENOENT: 812 case -ESHUTDOWN: 813 /* this urb is terminated, clean up */ 814 dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status); 815 priv->flags.write_urb_in_use = 0; 816 return; 817 default: 818 /* error in the urb, so we have to resubmit it */ 819 dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status); 820 dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__); 821 822 port->write_urb->transfer_buffer_length = 1; 823 result = usb_submit_urb(port->write_urb, GFP_ATOMIC); 824 if (result) { 825 dev_err_console(port, "%s(): usb_submit_urb() failed," 826 " error %d\n", __func__, result); 827 } else { 828 return; 829 } 830 } 831 832 priv->flags.write_urb_in_use = 0; 833 834 /* schedule the interrupt urb if we are still open */ 835 dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); 836 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); 837 if (result != 0) { 838 dev_err(&port->dev, "%s(): failed submitting int urb," 839 " error %d\n", __func__, result); 840 } 841 } 842 843 module_usb_serial_driver(serial_drivers, id_table); 844 845 MODULE_DESCRIPTION(OTI6858_DESCRIPTION); 846 MODULE_AUTHOR(OTI6858_AUTHOR); 847 MODULE_LICENSE("GPL"); 848