1 /* 2 * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver 3 * 4 * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is largely derived from the Belkin USB Serial Adapter Driver 12 * (see belkin_sa.[ch]). All of the information about the device was acquired 13 * by using SniffUSB on Windows98. For technical details see mct_u232.h. 14 * 15 * William G. Greathouse and Greg Kroah-Hartman provided great help on how to 16 * do the reverse engineering and how to write a USB serial device driver. 17 * 18 * TO BE DONE, TO BE CHECKED: 19 * DTR/RTS signal handling may be incomplete or incorrect. I have mainly 20 * implemented what I have seen with SniffUSB or found in belkin_sa.c. 21 * For further TODOs check also belkin_sa.c. 22 * 23 * TEST STATUS: 24 * Basic tests have been performed with minicom/zmodem transfers and 25 * modem dialing under Linux 2.4.0-test10 (for me it works fine). 26 * 27 * 04-Nov-2003 Bill Marr <marr at flex dot com> 28 * - Mimic Windows driver by sending 2 USB 'device request' messages 29 * following normal 'baud rate change' message. This allows data to be 30 * transmitted to RS-232 devices which don't assert the 'CTS' signal. 31 * 32 * 10-Nov-2001 Wolfgang Grandegger 33 * - Fixed an endianess problem with the baudrate selection for PowerPC. 34 * 35 * 06-Dec-2001 Martin Hamilton <martinh@gnu.org> 36 * - Added support for the Belkin F5U109 DB9 adaptor 37 * 38 * 30-May-2001 Greg Kroah-Hartman 39 * - switched from using spinlock to a semaphore, which fixes lots of 40 * problems. 41 * 42 * 04-May-2001 Stelian Pop 43 * - Set the maximum bulk output size for Sitecom U232-P25 model to 16 bytes 44 * instead of the device reported 32 (using 32 bytes causes many data 45 * loss, Windows driver uses 16 too). 46 * 47 * 02-May-2001 Stelian Pop 48 * - Fixed the baud calculation for Sitecom U232-P25 model 49 * 50 * 08-Apr-2001 gb 51 * - Identify version on module load. 52 * 53 * 06-Jan-2001 Cornel Ciocirlan 54 * - Added support for Sitecom U232-P25 model (Product Id 0x0230) 55 * - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200) 56 * 57 * 29-Nov-2000 Greg Kroah-Hartman 58 * - Added device id table to fit with 2.4.0-test11 structure. 59 * - took out DEAL_WITH_TWO_INT_IN_ENDPOINTS #define as it's not needed 60 * (lots of things will change if/when the usb-serial core changes to 61 * handle these issues. 62 * 63 * 27-Nov-2000 Wolfgang Grandegge 64 * A version for kernel 2.4.0-test10 released to the Linux community 65 * (via linux-usb-devel). 66 */ 67 68 #include <linux/kernel.h> 69 #include <linux/errno.h> 70 #include <linux/init.h> 71 #include <linux/slab.h> 72 #include <linux/tty.h> 73 #include <linux/tty_driver.h> 74 #include <linux/tty_flip.h> 75 #include <linux/module.h> 76 #include <linux/spinlock.h> 77 #include <linux/uaccess.h> 78 #include <linux/usb.h> 79 #include <linux/usb/serial.h> 80 #include "mct_u232.h" 81 82 /* 83 * Version Information 84 */ 85 #define DRIVER_VERSION "z2.1" /* Linux in-kernel version */ 86 #define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" 87 #define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" 88 89 static int debug; 90 91 /* 92 * Function prototypes 93 */ 94 static int mct_u232_startup(struct usb_serial *serial); 95 static void mct_u232_shutdown(struct usb_serial *serial); 96 static int mct_u232_open(struct tty_struct *tty, 97 struct usb_serial_port *port, struct file *filp); 98 static void mct_u232_close(struct tty_struct *tty, 99 struct usb_serial_port *port, struct file *filp); 100 static void mct_u232_read_int_callback(struct urb *urb); 101 static void mct_u232_set_termios(struct tty_struct *tty, 102 struct usb_serial_port *port, struct ktermios *old); 103 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); 104 static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file); 105 static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, 106 unsigned int set, unsigned int clear); 107 static void mct_u232_throttle(struct tty_struct *tty); 108 static void mct_u232_unthrottle(struct tty_struct *tty); 109 110 111 /* 112 * All of the device info needed for the MCT USB-RS232 converter. 113 */ 114 static struct usb_device_id id_table_combined [] = { 115 { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, 116 { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, 117 { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, 118 { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) }, 119 { } /* Terminating entry */ 120 }; 121 122 MODULE_DEVICE_TABLE(usb, id_table_combined); 123 124 static struct usb_driver mct_u232_driver = { 125 .name = "mct_u232", 126 .probe = usb_serial_probe, 127 .disconnect = usb_serial_disconnect, 128 .id_table = id_table_combined, 129 .no_dynamic_id = 1, 130 }; 131 132 static struct usb_serial_driver mct_u232_device = { 133 .driver = { 134 .owner = THIS_MODULE, 135 .name = "mct_u232", 136 }, 137 .description = "MCT U232", 138 .usb_driver = &mct_u232_driver, 139 .id_table = id_table_combined, 140 .num_ports = 1, 141 .open = mct_u232_open, 142 .close = mct_u232_close, 143 .throttle = mct_u232_throttle, 144 .unthrottle = mct_u232_unthrottle, 145 .read_int_callback = mct_u232_read_int_callback, 146 .set_termios = mct_u232_set_termios, 147 .break_ctl = mct_u232_break_ctl, 148 .tiocmget = mct_u232_tiocmget, 149 .tiocmset = mct_u232_tiocmset, 150 .attach = mct_u232_startup, 151 .shutdown = mct_u232_shutdown, 152 }; 153 154 155 struct mct_u232_private { 156 spinlock_t lock; 157 unsigned int control_state; /* Modem Line Setting (TIOCM) */ 158 unsigned char last_lcr; /* Line Control Register */ 159 unsigned char last_lsr; /* Line Status Register */ 160 unsigned char last_msr; /* Modem Status Register */ 161 unsigned int rx_flags; /* Throttling flags */ 162 }; 163 164 #define THROTTLED 0x01 165 166 /* 167 * Handle vendor specific USB requests 168 */ 169 170 #define WDR_TIMEOUT 5000 /* default urb timeout */ 171 172 /* 173 * Later day 2.6.0-test kernels have new baud rates like B230400 which 174 * we do not know how to support. We ignore them for the moment. 175 */ 176 static int mct_u232_calculate_baud_rate(struct usb_serial *serial, 177 speed_t value, speed_t *result) 178 { 179 *result = value; 180 181 if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID 182 || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { 183 switch (value) { 184 case 300: 185 return 0x01; 186 case 600: 187 return 0x02; /* this one not tested */ 188 case 1200: 189 return 0x03; 190 case 2400: 191 return 0x04; 192 case 4800: 193 return 0x06; 194 case 9600: 195 return 0x08; 196 case 19200: 197 return 0x09; 198 case 38400: 199 return 0x0a; 200 case 57600: 201 return 0x0b; 202 case 115200: 203 return 0x0c; 204 default: 205 *result = 9600; 206 return 0x08; 207 } 208 } else { 209 /* FIXME: Can we use any divider - should we do 210 divider = 115200/value; 211 real baud = 115200/divider */ 212 switch (value) { 213 case 300: break; 214 case 600: break; 215 case 1200: break; 216 case 2400: break; 217 case 4800: break; 218 case 9600: break; 219 case 19200: break; 220 case 38400: break; 221 case 57600: break; 222 case 115200: break; 223 default: 224 value = 9600; 225 *result = 9600; 226 } 227 return 115200/value; 228 } 229 } 230 231 static int mct_u232_set_baud_rate(struct tty_struct *tty, 232 struct usb_serial *serial, struct usb_serial_port *port, speed_t value) 233 { 234 __le32 divisor; 235 int rc; 236 unsigned char zero_byte = 0; 237 unsigned char cts_enable_byte = 0; 238 speed_t speed; 239 240 divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, 241 &speed)); 242 243 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 244 MCT_U232_SET_BAUD_RATE_REQUEST, 245 MCT_U232_SET_REQUEST_TYPE, 246 0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE, 247 WDR_TIMEOUT); 248 if (rc < 0) /*FIXME: What value speed results */ 249 err("Set BAUD RATE %d failed (error = %d)", value, rc); 250 else 251 tty_encode_baud_rate(tty, speed, speed); 252 dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor); 253 254 /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which 255 always sends two extra USB 'device request' messages after the 256 'baud rate change' message. The actual functionality of the 257 request codes in these messages is not fully understood but these 258 particular codes are never seen in any operation besides a baud 259 rate change. Both of these messages send a single byte of data. 260 In the first message, the value of this byte is always zero. 261 262 The second message has been determined experimentally to control 263 whether data will be transmitted to a device which is not asserting 264 the 'CTS' signal. If the second message's data byte is zero, data 265 will be transmitted even if 'CTS' is not asserted (i.e. no hardware 266 flow control). if the second message's data byte is nonzero (a 267 value of 1 is used by this driver), data will not be transmitted to 268 a device which is not asserting 'CTS'. 269 */ 270 271 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 272 MCT_U232_SET_UNKNOWN1_REQUEST, 273 MCT_U232_SET_REQUEST_TYPE, 274 0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE, 275 WDR_TIMEOUT); 276 if (rc < 0) 277 err("Sending USB device request code %d failed (error = %d)", 278 MCT_U232_SET_UNKNOWN1_REQUEST, rc); 279 280 if (port && C_CRTSCTS(tty)) 281 cts_enable_byte = 1; 282 283 dbg("set_baud_rate: send second control message, data = %02X", 284 cts_enable_byte); 285 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 286 MCT_U232_SET_CTS_REQUEST, 287 MCT_U232_SET_REQUEST_TYPE, 288 0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE, 289 WDR_TIMEOUT); 290 if (rc < 0) 291 err("Sending USB device request code %d failed (error = %d)", 292 MCT_U232_SET_CTS_REQUEST, rc); 293 294 return rc; 295 } /* mct_u232_set_baud_rate */ 296 297 static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr) 298 { 299 int rc; 300 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 301 MCT_U232_SET_LINE_CTRL_REQUEST, 302 MCT_U232_SET_REQUEST_TYPE, 303 0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE, 304 WDR_TIMEOUT); 305 if (rc < 0) 306 err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc); 307 dbg("set_line_ctrl: 0x%x", lcr); 308 return rc; 309 } /* mct_u232_set_line_ctrl */ 310 311 static int mct_u232_set_modem_ctrl(struct usb_serial *serial, 312 unsigned int control_state) 313 { 314 int rc; 315 unsigned char mcr = MCT_U232_MCR_NONE; 316 317 if (control_state & TIOCM_DTR) 318 mcr |= MCT_U232_MCR_DTR; 319 if (control_state & TIOCM_RTS) 320 mcr |= MCT_U232_MCR_RTS; 321 322 rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), 323 MCT_U232_SET_MODEM_CTRL_REQUEST, 324 MCT_U232_SET_REQUEST_TYPE, 325 0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE, 326 WDR_TIMEOUT); 327 if (rc < 0) 328 err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc); 329 dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr); 330 331 return rc; 332 } /* mct_u232_set_modem_ctrl */ 333 334 static int mct_u232_get_modem_stat(struct usb_serial *serial, 335 unsigned char *msr) 336 { 337 int rc; 338 rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 339 MCT_U232_GET_MODEM_STAT_REQUEST, 340 MCT_U232_GET_REQUEST_TYPE, 341 0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE, 342 WDR_TIMEOUT); 343 if (rc < 0) { 344 err("Get MODEM STATus failed (error = %d)", rc); 345 *msr = 0; 346 } 347 dbg("get_modem_stat: 0x%x", *msr); 348 return rc; 349 } /* mct_u232_get_modem_stat */ 350 351 static void mct_u232_msr_to_state(unsigned int *control_state, 352 unsigned char msr) 353 { 354 /* Translate Control Line states */ 355 if (msr & MCT_U232_MSR_DSR) 356 *control_state |= TIOCM_DSR; 357 else 358 *control_state &= ~TIOCM_DSR; 359 if (msr & MCT_U232_MSR_CTS) 360 *control_state |= TIOCM_CTS; 361 else 362 *control_state &= ~TIOCM_CTS; 363 if (msr & MCT_U232_MSR_RI) 364 *control_state |= TIOCM_RI; 365 else 366 *control_state &= ~TIOCM_RI; 367 if (msr & MCT_U232_MSR_CD) 368 *control_state |= TIOCM_CD; 369 else 370 *control_state &= ~TIOCM_CD; 371 dbg("msr_to_state: msr=0x%x ==> state=0x%x", msr, *control_state); 372 } /* mct_u232_msr_to_state */ 373 374 /* 375 * Driver's tty interface functions 376 */ 377 378 static int mct_u232_startup(struct usb_serial *serial) 379 { 380 struct mct_u232_private *priv; 381 struct usb_serial_port *port, *rport; 382 383 priv = kzalloc(sizeof(struct mct_u232_private), GFP_KERNEL); 384 if (!priv) 385 return -ENOMEM; 386 spin_lock_init(&priv->lock); 387 usb_set_serial_port_data(serial->port[0], priv); 388 389 init_waitqueue_head(&serial->port[0]->write_wait); 390 391 /* Puh, that's dirty */ 392 port = serial->port[0]; 393 rport = serial->port[1]; 394 /* No unlinking, it wasn't submitted yet. */ 395 usb_free_urb(port->read_urb); 396 port->read_urb = rport->interrupt_in_urb; 397 rport->interrupt_in_urb = NULL; 398 port->read_urb->context = port; 399 400 return 0; 401 } /* mct_u232_startup */ 402 403 404 static void mct_u232_shutdown(struct usb_serial *serial) 405 { 406 struct mct_u232_private *priv; 407 int i; 408 409 dbg("%s", __func__); 410 411 for (i = 0; i < serial->num_ports; ++i) { 412 /* My special items, the standard routines free my urbs */ 413 priv = usb_get_serial_port_data(serial->port[i]); 414 if (priv) { 415 usb_set_serial_port_data(serial->port[i], NULL); 416 kfree(priv); 417 } 418 } 419 } /* mct_u232_shutdown */ 420 421 static int mct_u232_open(struct tty_struct *tty, 422 struct usb_serial_port *port, struct file *filp) 423 { 424 struct usb_serial *serial = port->serial; 425 struct mct_u232_private *priv = usb_get_serial_port_data(port); 426 int retval = 0; 427 unsigned int control_state; 428 unsigned long flags; 429 unsigned char last_lcr; 430 unsigned char last_msr; 431 432 dbg("%s port %d", __func__, port->number); 433 434 /* Compensate for a hardware bug: although the Sitecom U232-P25 435 * device reports a maximum output packet size of 32 bytes, 436 * it seems to be able to accept only 16 bytes (and that's what 437 * SniffUSB says too...) 438 */ 439 if (le16_to_cpu(serial->dev->descriptor.idProduct) 440 == MCT_U232_SITECOM_PID) 441 port->bulk_out_size = 16; 442 443 /* Do a defined restart: the normal serial device seems to 444 * always turn on DTR and RTS here, so do the same. I'm not 445 * sure if this is really necessary. But it should not harm 446 * either. 447 */ 448 spin_lock_irqsave(&priv->lock, flags); 449 if (tty && (tty->termios->c_cflag & CBAUD)) 450 priv->control_state = TIOCM_DTR | TIOCM_RTS; 451 else 452 priv->control_state = 0; 453 454 priv->last_lcr = (MCT_U232_DATA_BITS_8 | 455 MCT_U232_PARITY_NONE | 456 MCT_U232_STOP_BITS_1); 457 control_state = priv->control_state; 458 last_lcr = priv->last_lcr; 459 spin_unlock_irqrestore(&priv->lock, flags); 460 mct_u232_set_modem_ctrl(serial, control_state); 461 mct_u232_set_line_ctrl(serial, last_lcr); 462 463 /* Read modem status and update control state */ 464 mct_u232_get_modem_stat(serial, &last_msr); 465 spin_lock_irqsave(&priv->lock, flags); 466 priv->last_msr = last_msr; 467 mct_u232_msr_to_state(&priv->control_state, priv->last_msr); 468 spin_unlock_irqrestore(&priv->lock, flags); 469 470 port->read_urb->dev = port->serial->dev; 471 retval = usb_submit_urb(port->read_urb, GFP_KERNEL); 472 if (retval) { 473 err("usb_submit_urb(read bulk) failed pipe 0x%x err %d", 474 port->read_urb->pipe, retval); 475 goto error; 476 } 477 478 port->interrupt_in_urb->dev = port->serial->dev; 479 retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 480 if (retval) { 481 usb_kill_urb(port->read_urb); 482 err(" usb_submit_urb(read int) failed pipe 0x%x err %d", 483 port->interrupt_in_urb->pipe, retval); 484 goto error; 485 } 486 return 0; 487 488 error: 489 return retval; 490 } /* mct_u232_open */ 491 492 493 static void mct_u232_close(struct tty_struct *tty, 494 struct usb_serial_port *port, struct file *filp) 495 { 496 unsigned int c_cflag; 497 unsigned int control_state; 498 struct mct_u232_private *priv = usb_get_serial_port_data(port); 499 dbg("%s port %d", __func__, port->number); 500 501 if (tty) { 502 c_cflag = tty->termios->c_cflag; 503 mutex_lock(&port->serial->disc_mutex); 504 if (c_cflag & HUPCL && !port->serial->disconnected) { 505 /* drop DTR and RTS */ 506 spin_lock_irq(&priv->lock); 507 priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); 508 control_state = priv->control_state; 509 spin_unlock_irq(&priv->lock); 510 mct_u232_set_modem_ctrl(port->serial, control_state); 511 } 512 mutex_unlock(&port->serial->disc_mutex); 513 } 514 515 516 if (port->serial->dev) { 517 /* shutdown our urbs */ 518 usb_kill_urb(port->write_urb); 519 usb_kill_urb(port->read_urb); 520 usb_kill_urb(port->interrupt_in_urb); 521 } 522 } /* mct_u232_close */ 523 524 525 static void mct_u232_read_int_callback(struct urb *urb) 526 { 527 struct usb_serial_port *port = urb->context; 528 struct mct_u232_private *priv = usb_get_serial_port_data(port); 529 struct usb_serial *serial = port->serial; 530 struct tty_struct *tty; 531 unsigned char *data = urb->transfer_buffer; 532 int retval; 533 int status = urb->status; 534 unsigned long flags; 535 536 switch (status) { 537 case 0: 538 /* success */ 539 break; 540 case -ECONNRESET: 541 case -ENOENT: 542 case -ESHUTDOWN: 543 /* this urb is terminated, clean up */ 544 dbg("%s - urb shutting down with status: %d", 545 __func__, status); 546 return; 547 default: 548 dbg("%s - nonzero urb status received: %d", 549 __func__, status); 550 goto exit; 551 } 552 553 if (!serial) { 554 dbg("%s - bad serial pointer, exiting", __func__); 555 return; 556 } 557 558 dbg("%s - port %d", __func__, port->number); 559 usb_serial_debug_data(debug, &port->dev, __func__, 560 urb->actual_length, data); 561 562 /* 563 * Work-a-round: handle the 'usual' bulk-in pipe here 564 */ 565 if (urb->transfer_buffer_length > 2) { 566 tty = port->port.tty; 567 if (urb->actual_length) { 568 tty_insert_flip_string(tty, data, urb->actual_length); 569 tty_flip_buffer_push(tty); 570 } 571 goto exit; 572 } 573 574 /* 575 * The interrupt-in pipe signals exceptional conditions (modem line 576 * signal changes and errors). data[0] holds MSR, data[1] holds LSR. 577 */ 578 spin_lock_irqsave(&priv->lock, flags); 579 priv->last_msr = data[MCT_U232_MSR_INDEX]; 580 581 /* Record Control Line states */ 582 mct_u232_msr_to_state(&priv->control_state, priv->last_msr); 583 584 #if 0 585 /* Not yet handled. See belkin_sa.c for further information */ 586 /* Now to report any errors */ 587 priv->last_lsr = data[MCT_U232_LSR_INDEX]; 588 /* 589 * fill in the flip buffer here, but I do not know the relation 590 * to the current/next receive buffer or characters. I need 591 * to look in to this before committing any code. 592 */ 593 if (priv->last_lsr & MCT_U232_LSR_ERR) { 594 tty = port->port.tty; 595 /* Overrun Error */ 596 if (priv->last_lsr & MCT_U232_LSR_OE) { 597 } 598 /* Parity Error */ 599 if (priv->last_lsr & MCT_U232_LSR_PE) { 600 } 601 /* Framing Error */ 602 if (priv->last_lsr & MCT_U232_LSR_FE) { 603 } 604 /* Break Indicator */ 605 if (priv->last_lsr & MCT_U232_LSR_BI) { 606 } 607 } 608 #endif 609 spin_unlock_irqrestore(&priv->lock, flags); 610 exit: 611 retval = usb_submit_urb(urb, GFP_ATOMIC); 612 if (retval) 613 err("%s - usb_submit_urb failed with result %d", 614 __func__, retval); 615 } /* mct_u232_read_int_callback */ 616 617 static void mct_u232_set_termios(struct tty_struct *tty, 618 struct usb_serial_port *port, 619 struct ktermios *old_termios) 620 { 621 struct usb_serial *serial = port->serial; 622 struct mct_u232_private *priv = usb_get_serial_port_data(port); 623 struct ktermios *termios = tty->termios; 624 unsigned int cflag = termios->c_cflag; 625 unsigned int old_cflag = old_termios->c_cflag; 626 unsigned long flags; 627 unsigned int control_state; 628 unsigned char last_lcr; 629 630 /* get a local copy of the current port settings */ 631 spin_lock_irqsave(&priv->lock, flags); 632 control_state = priv->control_state; 633 spin_unlock_irqrestore(&priv->lock, flags); 634 last_lcr = 0; 635 636 /* 637 * Update baud rate. 638 * Do not attempt to cache old rates and skip settings, 639 * disconnects screw such tricks up completely. 640 * Premature optimization is the root of all evil. 641 */ 642 643 /* reassert DTR and RTS on transition from B0 */ 644 if ((old_cflag & CBAUD) == B0) { 645 dbg("%s: baud was B0", __func__); 646 control_state |= TIOCM_DTR | TIOCM_RTS; 647 mct_u232_set_modem_ctrl(serial, control_state); 648 } 649 650 mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); 651 652 if ((cflag & CBAUD) == B0) { 653 dbg("%s: baud is B0", __func__); 654 /* Drop RTS and DTR */ 655 control_state &= ~(TIOCM_DTR | TIOCM_RTS); 656 mct_u232_set_modem_ctrl(serial, control_state); 657 } 658 659 /* 660 * Update line control register (LCR) 661 */ 662 663 /* set the parity */ 664 if (cflag & PARENB) 665 last_lcr |= (cflag & PARODD) ? 666 MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; 667 else 668 last_lcr |= MCT_U232_PARITY_NONE; 669 670 /* set the number of data bits */ 671 switch (cflag & CSIZE) { 672 case CS5: 673 last_lcr |= MCT_U232_DATA_BITS_5; break; 674 case CS6: 675 last_lcr |= MCT_U232_DATA_BITS_6; break; 676 case CS7: 677 last_lcr |= MCT_U232_DATA_BITS_7; break; 678 case CS8: 679 last_lcr |= MCT_U232_DATA_BITS_8; break; 680 default: 681 err("CSIZE was not CS5-CS8, using default of 8"); 682 last_lcr |= MCT_U232_DATA_BITS_8; 683 break; 684 } 685 686 termios->c_cflag &= ~CMSPAR; 687 688 /* set the number of stop bits */ 689 last_lcr |= (cflag & CSTOPB) ? 690 MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; 691 692 mct_u232_set_line_ctrl(serial, last_lcr); 693 694 /* save off the modified port settings */ 695 spin_lock_irqsave(&priv->lock, flags); 696 priv->control_state = control_state; 697 priv->last_lcr = last_lcr; 698 spin_unlock_irqrestore(&priv->lock, flags); 699 } /* mct_u232_set_termios */ 700 701 static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) 702 { 703 struct usb_serial_port *port = tty->driver_data; 704 struct usb_serial *serial = port->serial; 705 struct mct_u232_private *priv = usb_get_serial_port_data(port); 706 unsigned char lcr; 707 unsigned long flags; 708 709 dbg("%sstate=%d", __func__, break_state); 710 711 spin_lock_irqsave(&priv->lock, flags); 712 lcr = priv->last_lcr; 713 spin_unlock_irqrestore(&priv->lock, flags); 714 715 if (break_state) 716 lcr |= MCT_U232_SET_BREAK; 717 718 mct_u232_set_line_ctrl(serial, lcr); 719 } /* mct_u232_break_ctl */ 720 721 722 static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file) 723 { 724 struct usb_serial_port *port = tty->driver_data; 725 struct mct_u232_private *priv = usb_get_serial_port_data(port); 726 unsigned int control_state; 727 unsigned long flags; 728 729 dbg("%s", __func__); 730 731 spin_lock_irqsave(&priv->lock, flags); 732 control_state = priv->control_state; 733 spin_unlock_irqrestore(&priv->lock, flags); 734 735 return control_state; 736 } 737 738 static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, 739 unsigned int set, unsigned int clear) 740 { 741 struct usb_serial_port *port = tty->driver_data; 742 struct usb_serial *serial = port->serial; 743 struct mct_u232_private *priv = usb_get_serial_port_data(port); 744 unsigned int control_state; 745 unsigned long flags; 746 747 dbg("%s", __func__); 748 749 spin_lock_irqsave(&priv->lock, flags); 750 control_state = priv->control_state; 751 752 if (set & TIOCM_RTS) 753 control_state |= TIOCM_RTS; 754 if (set & TIOCM_DTR) 755 control_state |= TIOCM_DTR; 756 if (clear & TIOCM_RTS) 757 control_state &= ~TIOCM_RTS; 758 if (clear & TIOCM_DTR) 759 control_state &= ~TIOCM_DTR; 760 761 priv->control_state = control_state; 762 spin_unlock_irqrestore(&priv->lock, flags); 763 return mct_u232_set_modem_ctrl(serial, control_state); 764 } 765 766 static void mct_u232_throttle(struct tty_struct *tty) 767 { 768 struct usb_serial_port *port = tty->driver_data; 769 struct mct_u232_private *priv = usb_get_serial_port_data(port); 770 unsigned long flags; 771 unsigned int control_state; 772 773 dbg("%s - port %d", __func__, port->number); 774 775 spin_lock_irqsave(&priv->lock, flags); 776 priv->rx_flags |= THROTTLED; 777 if (C_CRTSCTS(tty)) { 778 priv->control_state &= ~TIOCM_RTS; 779 control_state = priv->control_state; 780 spin_unlock_irqrestore(&priv->lock, flags); 781 (void) mct_u232_set_modem_ctrl(port->serial, control_state); 782 } else { 783 spin_unlock_irqrestore(&priv->lock, flags); 784 } 785 } 786 787 788 static void mct_u232_unthrottle(struct tty_struct *tty) 789 { 790 struct usb_serial_port *port = tty->driver_data; 791 struct mct_u232_private *priv = usb_get_serial_port_data(port); 792 unsigned long flags; 793 unsigned int control_state; 794 795 dbg("%s - port %d", __func__, port->number); 796 797 spin_lock_irqsave(&priv->lock, flags); 798 if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { 799 priv->rx_flags &= ~THROTTLED; 800 priv->control_state |= TIOCM_RTS; 801 control_state = priv->control_state; 802 spin_unlock_irqrestore(&priv->lock, flags); 803 (void) mct_u232_set_modem_ctrl(port->serial, control_state); 804 } else { 805 spin_unlock_irqrestore(&priv->lock, flags); 806 } 807 } 808 809 static int __init mct_u232_init(void) 810 { 811 int retval; 812 retval = usb_serial_register(&mct_u232_device); 813 if (retval) 814 goto failed_usb_serial_register; 815 retval = usb_register(&mct_u232_driver); 816 if (retval) 817 goto failed_usb_register; 818 info(DRIVER_DESC " " DRIVER_VERSION); 819 return 0; 820 failed_usb_register: 821 usb_serial_deregister(&mct_u232_device); 822 failed_usb_serial_register: 823 return retval; 824 } 825 826 827 static void __exit mct_u232_exit(void) 828 { 829 usb_deregister(&mct_u232_driver); 830 usb_serial_deregister(&mct_u232_device); 831 } 832 833 module_init(mct_u232_init); 834 module_exit(mct_u232_exit); 835 836 MODULE_AUTHOR(DRIVER_AUTHOR); 837 MODULE_DESCRIPTION(DRIVER_DESC); 838 MODULE_LICENSE("GPL"); 839 840 module_param(debug, bool, S_IRUGO | S_IWUSR); 841 MODULE_PARM_DESC(debug, "Debug enabled or not"); 842