1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #define SUSBCRequest_SetBaudRateParityAndStopBits 1 3 #define SUSBCR_SBR_MASK 0xFF00 4 #define SUSBCR_SBR_1200 0x0100 5 #define SUSBCR_SBR_9600 0x0200 6 #define SUSBCR_SBR_19200 0x0400 7 #define SUSBCR_SBR_28800 0x0800 8 #define SUSBCR_SBR_38400 0x1000 9 #define SUSBCR_SBR_57600 0x2000 10 #define SUSBCR_SBR_115200 0x4000 11 12 #define SUSBCR_SPASB_MASK 0x0070 13 #define SUSBCR_SPASB_NoParity 0x0010 14 #define SUSBCR_SPASB_OddParity 0x0020 15 #define SUSBCR_SPASB_EvenParity 0x0040 16 17 #define SUSBCR_SPASB_STPMASK 0x0003 18 #define SUSBCR_SPASB_1StopBit 0x0001 19 #define SUSBCR_SPASB_2StopBits 0x0002 20 21 #define SUSBCRequest_SetStatusLinesOrQueues 2 22 #define SUSBCR_SSL_SETRTS 0x0001 23 #define SUSBCR_SSL_CLRRTS 0x0002 24 #define SUSBCR_SSL_SETDTR 0x0004 25 #define SUSBCR_SSL_CLRDTR 0x0010 26 27 /* Kill the pending/current writes to the comm port. */ 28 #define SUSBCR_SSL_PURGE_TXABORT 0x0100 29 /* Kill the pending/current reads to the comm port. */ 30 #define SUSBCR_SSL_PURGE_RXABORT 0x0200 31 /* Kill the transmit queue if there. */ 32 #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 33 /* Kill the typeahead buffer if there. */ 34 #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 35 36 #define SUSBCRequest_GetStatusLineState 4 37 /* Any Character received */ 38 #define SUSBCR_GSL_RXCHAR 0x0001 39 /* Transmitt Queue Empty */ 40 #define SUSBCR_GSL_TXEMPTY 0x0004 41 /* CTS changed state */ 42 #define SUSBCR_GSL_CTS 0x0008 43 /* DSR changed state */ 44 #define SUSBCR_GSL_DSR 0x0010 45 /* RLSD changed state */ 46 #define SUSBCR_GSL_RLSD 0x0020 47 /* BREAK received */ 48 #define SUSBCR_GSL_BREAK 0x0040 49 /* Line status error occurred */ 50 #define SUSBCR_GSL_ERR 0x0080 51 /* Ring signal detected */ 52 #define SUSBCR_GSL_RING 0x0100 53 54 #define SUSBCRequest_Misc 8 55 /* use a predefined reset sequence */ 56 #define SUSBCR_MSC_ResetReader 0x0001 57 /* use a predefined sequence to reset the internal queues */ 58 #define SUSBCR_MSC_ResetAllQueues 0x0002 59 60 #define SUSBCRequest_GetMisc 0x10 61 62 /* 63 * get the firmware version from device, coded like this 0xHHLLBBPP with 64 * HH = Firmware Version High Byte 65 * LL = Firmware Version Low Byte 66 * BB = Build Number 67 * PP = Further Attributes 68 */ 69 #define SUSBCR_MSC_GetFWVersion 0x0001 70 71 /* 72 * get the hardware version from device coded like this 0xHHLLPPRR with 73 * HH = Software Version High Byte 74 * LL = Software Version Low Byte 75 * PP = Further Attributes 76 * RR = Reserved for the hardware ID 77 */ 78 #define SUSBCR_MSC_GetHWVersion 0x0002 79