1 /* 2 * IPWireless 3G UMTS TDD Modem driver (USB connected) 3 * 4 * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za> 5 * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * All information about the device was acquired using SnoopyPro 13 * on MSFT's O/S, and examing the MSFT drivers' debug output 14 * (insanely left _on_ in the enduser version) 15 * 16 * It was written out of frustration with the IPWireless USB modem 17 * supplied by Axity3G/Sentech South Africa not supporting 18 * Linux whatsoever. 19 * 20 * Nobody provided any proprietary information that was not already 21 * available for this device. 22 * 23 * The modem adheres to the "3GPP TS 27.007 AT command set for 3G 24 * User Equipment (UE)" standard, available from 25 * http://www.3gpp.org/ftp/Specs/html-info/27007.htm 26 * 27 * The code was only tested the IPWireless handheld modem distributed 28 * in South Africa by Sentech. 29 * 30 * It may work for Woosh Inc in .nz too, as it appears they use the 31 * same kit. 32 * 33 * There is still some work to be done in terms of handling 34 * DCD, DTR, RTS, CTS which are currently faked. 35 * It's good enough for PPP at this point. It's based off all kinds of 36 * code found in usb/serial and usb/class 37 */ 38 39 #include <linux/kernel.h> 40 #include <linux/errno.h> 41 #include <linux/init.h> 42 #include <linux/slab.h> 43 #include <linux/tty.h> 44 #include <linux/tty_flip.h> 45 #include <linux/module.h> 46 #include <linux/spinlock.h> 47 #include <linux/usb.h> 48 #include <linux/usb/serial.h> 49 #include <linux/uaccess.h> 50 #include "usb-wwan.h" 51 52 /* 53 * Version Information 54 */ 55 #define DRIVER_VERSION "v0.4" 56 #define DRIVER_AUTHOR "Roelf Diedericks" 57 #define DRIVER_DESC "IPWireless tty driver" 58 59 #define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */ 60 #define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */ 61 62 #define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */ 63 64 65 /* Message sizes */ 66 #define EVENT_BUFFER_SIZE 0xFF 67 #define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) 68 69 /* vendor/product pairs that are known work with this driver*/ 70 #define IPW_VID 0x0bc3 71 #define IPW_PID 0x0001 72 73 74 /* Vendor commands: */ 75 76 /* baud rates */ 77 enum { 78 ipw_sio_b256000 = 0x000e, 79 ipw_sio_b128000 = 0x001d, 80 ipw_sio_b115200 = 0x0020, 81 ipw_sio_b57600 = 0x0040, 82 ipw_sio_b56000 = 0x0042, 83 ipw_sio_b38400 = 0x0060, 84 ipw_sio_b19200 = 0x00c0, 85 ipw_sio_b14400 = 0x0100, 86 ipw_sio_b9600 = 0x0180, 87 ipw_sio_b4800 = 0x0300, 88 ipw_sio_b2400 = 0x0600, 89 ipw_sio_b1200 = 0x0c00, 90 ipw_sio_b600 = 0x1800 91 }; 92 93 /* data bits */ 94 #define ipw_dtb_7 0x700 95 #define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */ 96 /* I mean, is there a point to any other setting these days? :) */ 97 98 /* usb control request types : */ 99 #define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */ 100 #define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */ 101 #define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */ 102 #define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */ 103 #define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */ 104 #define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */ 105 #define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */ 106 #define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */ 107 #define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */ 108 /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */ 109 110 /* values used for request IPW_SIO_SET_PIN */ 111 #define IPW_PIN_SETDTR 0x101 112 #define IPW_PIN_SETRTS 0x202 113 #define IPW_PIN_CLRDTR 0x100 114 #define IPW_PIN_CLRRTS 0x200 /* unconfirmed */ 115 116 /* values used for request IPW_SIO_RXCTL */ 117 #define IPW_RXBULK_ON 1 118 #define IPW_RXBULK_OFF 0 119 120 /* various 16 byte hardcoded transferbuffers used by flow control */ 121 #define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \ 122 0, 0, 0, 0, 0, 0, 0, 0 } 123 124 /* Interpretation of modem status lines */ 125 /* These need sorting out by individually connecting pins and checking 126 * results. FIXME! 127 * When data is being sent we see 0x30 in the lower byte; this must 128 * contain DSR and CTS ... 129 */ 130 #define IPW_DSR ((1<<4) | (1<<5)) 131 #define IPW_CTS ((1<<5) | (1<<4)) 132 133 #define IPW_WANTS_TO_SEND 0x30 134 135 static const struct usb_device_id id_table[] = { 136 { USB_DEVICE(IPW_VID, IPW_PID) }, 137 { }, 138 }; 139 MODULE_DEVICE_TABLE(usb, id_table); 140 141 static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) 142 { 143 struct usb_device *udev = port->serial->dev; 144 struct device *dev = &port->dev; 145 u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; 146 u8 *buf_flow_init; 147 int result; 148 149 buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); 150 if (!buf_flow_init) 151 return -ENOMEM; 152 153 /* --1: Tell the modem to initialize (we think) From sniffs this is 154 * always the first thing that gets sent to the modem during 155 * opening of the device */ 156 dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__); 157 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 158 IPW_SIO_INIT, 159 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 160 0, 161 0, /* index */ 162 NULL, 163 0, 164 100000); 165 if (result < 0) 166 dev_err(dev, "Init of modem failed (error = %d)\n", result); 167 168 /* reset the bulk pipes */ 169 usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress)); 170 usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress)); 171 172 /*--2: Start reading from the device */ 173 dev_dbg(dev, "%s: setting up bulk read callback\n", __func__); 174 usb_wwan_open(tty, port); 175 176 /*--3: Tell the modem to open the floodgates on the rx bulk channel */ 177 dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__); 178 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 179 IPW_SIO_RXCTL, 180 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 181 IPW_RXBULK_ON, 182 0, /* index */ 183 NULL, 184 0, 185 100000); 186 if (result < 0) 187 dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result); 188 189 /*--4: setup the initial flowcontrol */ 190 dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init); 191 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 192 IPW_SIO_HANDFLOW, 193 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 194 0, 195 0, 196 buf_flow_init, 197 0x10, 198 200000); 199 if (result < 0) 200 dev_err(dev, "initial flowcontrol failed (error = %d)\n", result); 201 202 kfree(buf_flow_init); 203 return 0; 204 } 205 206 static int ipw_attach(struct usb_serial *serial) 207 { 208 struct usb_wwan_intf_private *data; 209 210 data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); 211 if (!data) 212 return -ENOMEM; 213 214 spin_lock_init(&data->susp_lock); 215 usb_set_serial_data(serial, data); 216 return 0; 217 } 218 219 static void ipw_release(struct usb_serial *serial) 220 { 221 struct usb_wwan_intf_private *data = usb_get_serial_data(serial); 222 223 usb_set_serial_data(serial, NULL); 224 kfree(data); 225 } 226 227 static void ipw_dtr_rts(struct usb_serial_port *port, int on) 228 { 229 struct usb_device *udev = port->serial->dev; 230 struct device *dev = &port->dev; 231 int result; 232 233 dev_dbg(dev, "%s: on = %d\n", __func__, on); 234 235 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 236 IPW_SIO_SET_PIN, 237 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 238 on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, 239 0, 240 NULL, 241 0, 242 200000); 243 if (result < 0) 244 dev_err(dev, "setting dtr failed (error = %d)\n", result); 245 246 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 247 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | 248 USB_RECIP_INTERFACE | USB_DIR_OUT, 249 on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, 250 0, 251 NULL, 252 0, 253 200000); 254 if (result < 0) 255 dev_err(dev, "setting rts failed (error = %d)\n", result); 256 } 257 258 static void ipw_close(struct usb_serial_port *port) 259 { 260 struct usb_device *udev = port->serial->dev; 261 struct device *dev = &port->dev; 262 int result; 263 264 /*--3: purge */ 265 dev_dbg(dev, "%s:sending purge\n", __func__); 266 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 267 IPW_SIO_PURGE, USB_TYPE_VENDOR | 268 USB_RECIP_INTERFACE | USB_DIR_OUT, 269 0x03, 270 0, 271 NULL, 272 0, 273 200000); 274 if (result < 0) 275 dev_err(dev, "purge failed (error = %d)\n", result); 276 277 278 /* send RXBULK_off (tell modem to stop transmitting bulk data on 279 rx chan) */ 280 result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 281 IPW_SIO_RXCTL, 282 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, 283 IPW_RXBULK_OFF, 284 0, /* index */ 285 NULL, 286 0, 287 100000); 288 289 if (result < 0) 290 dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result); 291 292 usb_wwan_close(port); 293 } 294 295 static struct usb_serial_driver ipw_device = { 296 .driver = { 297 .owner = THIS_MODULE, 298 .name = "ipw", 299 }, 300 .description = "IPWireless converter", 301 .id_table = id_table, 302 .num_ports = 1, 303 .open = ipw_open, 304 .close = ipw_close, 305 .attach = ipw_attach, 306 .release = ipw_release, 307 .port_probe = usb_wwan_port_probe, 308 .port_remove = usb_wwan_port_remove, 309 .dtr_rts = ipw_dtr_rts, 310 .write = usb_wwan_write, 311 }; 312 313 static struct usb_serial_driver * const serial_drivers[] = { 314 &ipw_device, NULL 315 }; 316 317 module_usb_serial_driver(serial_drivers, id_table); 318 319 /* Module information */ 320 MODULE_AUTHOR(DRIVER_AUTHOR); 321 MODULE_DESCRIPTION(DRIVER_DESC); 322 MODULE_LICENSE("GPL"); 323