1 /* 2 * Edgeport USB Serial Converter driver 3 * 4 * Copyright (C) 2000 Inside Out Networks, All rights reserved. 5 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * Supports the following devices: 13 * Edgeport/4 14 * Edgeport/4t 15 * Edgeport/2 16 * Edgeport/4i 17 * Edgeport/2i 18 * Edgeport/421 19 * Edgeport/21 20 * Rapidport/4 21 * Edgeport/8 22 * Edgeport/2D8 23 * Edgeport/4D8 24 * Edgeport/8i 25 * 26 * For questions or problems with this driver, contact Inside Out 27 * Networks technical support, or Peter Berger <pberger@brimson.com>, 28 * or Al Borchers <alborchers@steinerpoint.com>. 29 * 30 */ 31 32 #include <linux/kernel.h> 33 #include <linux/jiffies.h> 34 #include <linux/errno.h> 35 #include <linux/slab.h> 36 #include <linux/tty.h> 37 #include <linux/tty_driver.h> 38 #include <linux/tty_flip.h> 39 #include <linux/module.h> 40 #include <linux/spinlock.h> 41 #include <linux/serial.h> 42 #include <linux/ioctl.h> 43 #include <linux/wait.h> 44 #include <linux/firmware.h> 45 #include <linux/ihex.h> 46 #include <linux/uaccess.h> 47 #include <linux/usb.h> 48 #include <linux/usb/serial.h> 49 #include "io_edgeport.h" 50 #include "io_ionsp.h" /* info for the iosp messages */ 51 #include "io_16654.h" /* 16654 UART defines */ 52 53 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" 54 #define DRIVER_DESC "Edgeport USB Serial Driver" 55 56 #define MAX_NAME_LEN 64 57 58 #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ 59 60 /* receive port state */ 61 enum RXSTATE { 62 EXPECT_HDR1 = 0, /* Expect header byte 1 */ 63 EXPECT_HDR2 = 1, /* Expect header byte 2 */ 64 EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ 65 EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ 66 }; 67 68 69 /* Transmit Fifo 70 * This Transmit queue is an extension of the edgeport Rx buffer. 71 * The maximum amount of data buffered in both the edgeport 72 * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. 73 */ 74 struct TxFifo { 75 unsigned int head; /* index to head pointer (write) */ 76 unsigned int tail; /* index to tail pointer (read) */ 77 unsigned int count; /* Bytes in queue */ 78 unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */ 79 unsigned char *fifo; /* allocated Buffer */ 80 }; 81 82 /* This structure holds all of the local port information */ 83 struct edgeport_port { 84 __u16 txCredits; /* our current credits for this port */ 85 __u16 maxTxCredits; /* the max size of the port */ 86 87 struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ 88 struct urb *write_urb; /* write URB for this port */ 89 bool write_in_progress; /* 'true' while a write URB is outstanding */ 90 spinlock_t ep_lock; 91 92 __u8 shadowLCR; /* last LCR value received */ 93 __u8 shadowMCR; /* last MCR value received */ 94 __u8 shadowMSR; /* last MSR value received */ 95 __u8 shadowLSR; /* last LSR value received */ 96 __u8 shadowXonChar; /* last value set as XON char in Edgeport */ 97 __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */ 98 __u8 validDataMask; 99 __u32 baudRate; 100 101 bool open; 102 bool openPending; 103 bool commandPending; 104 bool closePending; 105 bool chaseResponsePending; 106 107 wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ 108 wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ 109 wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ 110 111 struct usb_serial_port *port; /* loop back to the owner of this object */ 112 }; 113 114 115 /* This structure holds all of the individual device information */ 116 struct edgeport_serial { 117 char name[MAX_NAME_LEN+2]; /* string name of this device */ 118 119 struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */ 120 struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */ 121 struct edgeport_product_info product_info; /* Product Info */ 122 struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */ 123 int is_epic; /* flag if EPiC device or not */ 124 125 __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ 126 unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ 127 struct urb *interrupt_read_urb; /* our interrupt urb */ 128 129 __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ 130 unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ 131 struct urb *read_urb; /* our bulk read urb */ 132 bool read_in_progress; 133 spinlock_t es_lock; 134 135 __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ 136 137 __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */ 138 139 enum RXSTATE rxState; /* the current state of the bulk receive processor */ 140 __u8 rxHeader1; /* receive header byte 1 */ 141 __u8 rxHeader2; /* receive header byte 2 */ 142 __u8 rxHeader3; /* receive header byte 3 */ 143 __u8 rxPort; /* the port that we are currently receiving data for */ 144 __u8 rxStatusCode; /* the receive status code */ 145 __u8 rxStatusParam; /* the receive status paramater */ 146 __s16 rxBytesRemaining; /* the number of port bytes left to read */ 147 struct usb_serial *serial; /* loop back to the owner of this object */ 148 }; 149 150 /* baud rate information */ 151 struct divisor_table_entry { 152 __u32 BaudRate; 153 __u16 Divisor; 154 }; 155 156 /* 157 * Define table of divisors for Rev A EdgePort/4 hardware 158 * These assume a 3.6864MHz crystal, the standard /16, and 159 * MCR.7 = 0. 160 */ 161 162 static const struct divisor_table_entry divisor_table[] = { 163 { 50, 4608}, 164 { 75, 3072}, 165 { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ 166 { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ 167 { 150, 1536}, 168 { 300, 768}, 169 { 600, 384}, 170 { 1200, 192}, 171 { 1800, 128}, 172 { 2400, 96}, 173 { 4800, 48}, 174 { 7200, 32}, 175 { 9600, 24}, 176 { 14400, 16}, 177 { 19200, 12}, 178 { 38400, 6}, 179 { 57600, 4}, 180 { 115200, 2}, 181 { 230400, 1}, 182 }; 183 184 /* Number of outstanding Command Write Urbs */ 185 static atomic_t CmdUrbs = ATOMIC_INIT(0); 186 187 188 /* local function prototypes */ 189 190 /* function prototypes for all URB callbacks */ 191 static void edge_interrupt_callback(struct urb *urb); 192 static void edge_bulk_in_callback(struct urb *urb); 193 static void edge_bulk_out_data_callback(struct urb *urb); 194 static void edge_bulk_out_cmd_callback(struct urb *urb); 195 196 /* function prototypes for the usbserial callbacks */ 197 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); 198 static void edge_close(struct usb_serial_port *port); 199 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, 200 const unsigned char *buf, int count); 201 static int edge_write_room(struct tty_struct *tty); 202 static int edge_chars_in_buffer(struct tty_struct *tty); 203 static void edge_throttle(struct tty_struct *tty); 204 static void edge_unthrottle(struct tty_struct *tty); 205 static void edge_set_termios(struct tty_struct *tty, 206 struct usb_serial_port *port, 207 struct ktermios *old_termios); 208 static int edge_ioctl(struct tty_struct *tty, 209 unsigned int cmd, unsigned long arg); 210 static void edge_break(struct tty_struct *tty, int break_state); 211 static int edge_tiocmget(struct tty_struct *tty); 212 static int edge_tiocmset(struct tty_struct *tty, 213 unsigned int set, unsigned int clear); 214 static int edge_startup(struct usb_serial *serial); 215 static void edge_disconnect(struct usb_serial *serial); 216 static void edge_release(struct usb_serial *serial); 217 static int edge_port_probe(struct usb_serial_port *port); 218 static int edge_port_remove(struct usb_serial_port *port); 219 220 #include "io_tables.h" /* all of the devices that this driver supports */ 221 222 /* function prototypes for all of our local functions */ 223 224 static void process_rcvd_data(struct edgeport_serial *edge_serial, 225 unsigned char *buffer, __u16 bufferLength); 226 static void process_rcvd_status(struct edgeport_serial *edge_serial, 227 __u8 byte2, __u8 byte3); 228 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, 229 int length); 230 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); 231 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, 232 __u8 lsr, __u8 data); 233 static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, 234 __u8 param); 235 static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); 236 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, 237 int baudRate); 238 static void change_port_settings(struct tty_struct *tty, 239 struct edgeport_port *edge_port, 240 struct ktermios *old_termios); 241 static int send_cmd_write_uart_register(struct edgeport_port *edge_port, 242 __u8 regNum, __u8 regValue); 243 static int write_cmd_usb(struct edgeport_port *edge_port, 244 unsigned char *buffer, int writeLength); 245 static void send_more_port_data(struct edgeport_serial *edge_serial, 246 struct edgeport_port *edge_port); 247 248 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, 249 __u16 length, const __u8 *data); 250 static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, 251 __u16 length, __u8 *data); 252 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, 253 __u16 length, const __u8 *data); 254 static void get_manufacturing_desc(struct edgeport_serial *edge_serial); 255 static void get_boot_desc(struct edgeport_serial *edge_serial); 256 static void load_application_firmware(struct edgeport_serial *edge_serial); 257 258 static void unicode_to_ascii(char *string, int buflen, 259 __le16 *unicode, int unicode_size); 260 261 262 /* ************************************************************************ */ 263 /* ************************************************************************ */ 264 /* ************************************************************************ */ 265 /* ************************************************************************ */ 266 267 /************************************************************************ 268 * * 269 * update_edgeport_E2PROM() Compare current versions of * 270 * Boot ROM and Manufacture * 271 * Descriptors with versions * 272 * embedded in this driver * 273 * * 274 ************************************************************************/ 275 static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) 276 { 277 struct device *dev = &edge_serial->serial->dev->dev; 278 __u32 BootCurVer; 279 __u32 BootNewVer; 280 __u8 BootMajorVersion; 281 __u8 BootMinorVersion; 282 __u16 BootBuildNumber; 283 __u32 Bootaddr; 284 const struct ihex_binrec *rec; 285 const struct firmware *fw; 286 const char *fw_name; 287 int response; 288 289 switch (edge_serial->product_info.iDownloadFile) { 290 case EDGE_DOWNLOAD_FILE_I930: 291 fw_name = "edgeport/boot.fw"; 292 break; 293 case EDGE_DOWNLOAD_FILE_80251: 294 fw_name = "edgeport/boot2.fw"; 295 break; 296 default: 297 return; 298 } 299 300 response = request_ihex_firmware(&fw, fw_name, 301 &edge_serial->serial->dev->dev); 302 if (response) { 303 dev_err(dev, "Failed to load image \"%s\" err %d\n", 304 fw_name, response); 305 return; 306 } 307 308 rec = (const struct ihex_binrec *)fw->data; 309 BootMajorVersion = rec->data[0]; 310 BootMinorVersion = rec->data[1]; 311 BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; 312 313 /* Check Boot Image Version */ 314 BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + 315 (edge_serial->boot_descriptor.MinorVersion << 16) + 316 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); 317 318 BootNewVer = (BootMajorVersion << 24) + 319 (BootMinorVersion << 16) + 320 BootBuildNumber; 321 322 dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", 323 edge_serial->boot_descriptor.MajorVersion, 324 edge_serial->boot_descriptor.MinorVersion, 325 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); 326 327 328 if (BootNewVer > BootCurVer) { 329 dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", 330 edge_serial->boot_descriptor.MajorVersion, 331 edge_serial->boot_descriptor.MinorVersion, 332 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), 333 BootMajorVersion, BootMinorVersion, BootBuildNumber); 334 335 dev_dbg(dev, "Downloading new Boot Image\n"); 336 337 for (rec = ihex_next_binrec(rec); rec; 338 rec = ihex_next_binrec(rec)) { 339 Bootaddr = be32_to_cpu(rec->addr); 340 response = rom_write(edge_serial->serial, 341 Bootaddr >> 16, 342 Bootaddr & 0xFFFF, 343 be16_to_cpu(rec->len), 344 &rec->data[0]); 345 if (response < 0) { 346 dev_err(&edge_serial->serial->dev->dev, 347 "rom_write failed (%x, %x, %d)\n", 348 Bootaddr >> 16, Bootaddr & 0xFFFF, 349 be16_to_cpu(rec->len)); 350 break; 351 } 352 } 353 } else { 354 dev_dbg(dev, "Boot Image -- already up to date\n"); 355 } 356 release_firmware(fw); 357 } 358 359 #if 0 360 /************************************************************************ 361 * 362 * Get string descriptor from device 363 * 364 ************************************************************************/ 365 static int get_string_desc(struct usb_device *dev, int Id, 366 struct usb_string_descriptor **pRetDesc) 367 { 368 struct usb_string_descriptor StringDesc; 369 struct usb_string_descriptor *pStringDesc; 370 371 dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); 372 373 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, 374 sizeof(StringDesc))) 375 return 0; 376 377 pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); 378 if (!pStringDesc) 379 return -1; 380 381 if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, 382 StringDesc.bLength)) { 383 kfree(pStringDesc); 384 return -1; 385 } 386 387 *pRetDesc = pStringDesc; 388 return 0; 389 } 390 #endif 391 392 static void dump_product_info(struct edgeport_serial *edge_serial, 393 struct edgeport_product_info *product_info) 394 { 395 struct device *dev = &edge_serial->serial->dev->dev; 396 397 /* Dump Product Info structure */ 398 dev_dbg(dev, "**Product Information:\n"); 399 dev_dbg(dev, " ProductId %x\n", product_info->ProductId); 400 dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); 401 dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); 402 dev_dbg(dev, " IsServer %d\n", product_info->IsServer); 403 dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); 404 dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); 405 dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); 406 dev_dbg(dev, " RomSize %d\n", product_info->RomSize); 407 dev_dbg(dev, " RamSize %d\n", product_info->RamSize); 408 dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); 409 dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); 410 dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", 411 product_info->BootMajorVersion, 412 product_info->BootMinorVersion, 413 le16_to_cpu(product_info->BootBuildNumber)); 414 dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", 415 product_info->FirmwareMajorVersion, 416 product_info->FirmwareMinorVersion, 417 le16_to_cpu(product_info->FirmwareBuildNumber)); 418 dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", 419 product_info->ManufactureDescDate[0], 420 product_info->ManufactureDescDate[1], 421 product_info->ManufactureDescDate[2]+1900); 422 dev_dbg(dev, " iDownloadFile 0x%x\n", 423 product_info->iDownloadFile); 424 dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); 425 } 426 427 static void get_product_info(struct edgeport_serial *edge_serial) 428 { 429 struct edgeport_product_info *product_info = &edge_serial->product_info; 430 431 memset(product_info, 0, sizeof(struct edgeport_product_info)); 432 433 product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); 434 product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; 435 product_info->ProdInfoVer = 0; 436 437 product_info->RomSize = edge_serial->manuf_descriptor.RomSize; 438 product_info->RamSize = edge_serial->manuf_descriptor.RamSize; 439 product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; 440 product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; 441 442 product_info->BootMajorVersion = 443 edge_serial->boot_descriptor.MajorVersion; 444 product_info->BootMinorVersion = 445 edge_serial->boot_descriptor.MinorVersion; 446 product_info->BootBuildNumber = 447 edge_serial->boot_descriptor.BuildNumber; 448 449 memcpy(product_info->ManufactureDescDate, 450 edge_serial->manuf_descriptor.DescDate, 451 sizeof(edge_serial->manuf_descriptor.DescDate)); 452 453 /* check if this is 2nd generation hardware */ 454 if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) 455 & ION_DEVICE_ID_80251_NETCHIP) 456 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; 457 else 458 product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; 459 460 /* Determine Product type and set appropriate flags */ 461 switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { 462 case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: 463 case ION_DEVICE_ID_EDGEPORT_4T: 464 case ION_DEVICE_ID_EDGEPORT_4: 465 case ION_DEVICE_ID_EDGEPORT_2: 466 case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: 467 case ION_DEVICE_ID_EDGEPORT_8: 468 case ION_DEVICE_ID_EDGEPORT_421: 469 case ION_DEVICE_ID_EDGEPORT_21: 470 case ION_DEVICE_ID_EDGEPORT_2_DIN: 471 case ION_DEVICE_ID_EDGEPORT_4_DIN: 472 case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: 473 product_info->IsRS232 = 1; 474 break; 475 476 case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ 477 product_info->IsRS422 = 1; 478 product_info->IsRS485 = 1; 479 break; 480 481 case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ 482 case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ 483 product_info->IsRS422 = 1; 484 break; 485 } 486 487 dump_product_info(edge_serial, product_info); 488 } 489 490 static int get_epic_descriptor(struct edgeport_serial *ep) 491 { 492 int result; 493 struct usb_serial *serial = ep->serial; 494 struct edgeport_product_info *product_info = &ep->product_info; 495 struct edge_compatibility_descriptor *epic = &ep->epic_descriptor; 496 struct edge_compatibility_bits *bits; 497 struct device *dev = &serial->dev->dev; 498 499 ep->is_epic = 0; 500 result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 501 USB_REQUEST_ION_GET_EPIC_DESC, 502 0xC0, 0x00, 0x00, 503 &ep->epic_descriptor, 504 sizeof(struct edge_compatibility_descriptor), 505 300); 506 507 if (result > 0) { 508 ep->is_epic = 1; 509 memset(product_info, 0, sizeof(struct edgeport_product_info)); 510 511 product_info->NumPorts = epic->NumPorts; 512 product_info->ProdInfoVer = 0; 513 product_info->FirmwareMajorVersion = epic->MajorVersion; 514 product_info->FirmwareMinorVersion = epic->MinorVersion; 515 product_info->FirmwareBuildNumber = epic->BuildNumber; 516 product_info->iDownloadFile = epic->iDownloadFile; 517 product_info->EpicVer = epic->EpicVer; 518 product_info->Epic = epic->Supports; 519 product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; 520 dump_product_info(ep, product_info); 521 522 bits = &ep->epic_descriptor.Supports; 523 dev_dbg(dev, "**EPIC descriptor:\n"); 524 dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); 525 dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); 526 dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); 527 dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); 528 dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); 529 dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); 530 dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); 531 dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); 532 dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); 533 dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); 534 dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); 535 dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); 536 dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); 537 } 538 539 return result; 540 } 541 542 543 /************************************************************************/ 544 /************************************************************************/ 545 /* U S B C A L L B A C K F U N C T I O N S */ 546 /* U S B C A L L B A C K F U N C T I O N S */ 547 /************************************************************************/ 548 /************************************************************************/ 549 550 /***************************************************************************** 551 * edge_interrupt_callback 552 * this is the callback function for when we have received data on the 553 * interrupt endpoint. 554 *****************************************************************************/ 555 static void edge_interrupt_callback(struct urb *urb) 556 { 557 struct edgeport_serial *edge_serial = urb->context; 558 struct device *dev; 559 struct edgeport_port *edge_port; 560 struct usb_serial_port *port; 561 unsigned char *data = urb->transfer_buffer; 562 int length = urb->actual_length; 563 int bytes_avail; 564 int position; 565 int txCredits; 566 int portNumber; 567 int result; 568 int status = urb->status; 569 570 switch (status) { 571 case 0: 572 /* success */ 573 break; 574 case -ECONNRESET: 575 case -ENOENT: 576 case -ESHUTDOWN: 577 /* this urb is terminated, clean up */ 578 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); 579 return; 580 default: 581 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); 582 goto exit; 583 } 584 585 dev = &edge_serial->serial->dev->dev; 586 587 /* process this interrupt-read even if there are no ports open */ 588 if (length) { 589 usb_serial_debug_data(dev, __func__, length, data); 590 591 if (length > 1) { 592 bytes_avail = data[0] | (data[1] << 8); 593 if (bytes_avail) { 594 spin_lock(&edge_serial->es_lock); 595 edge_serial->rxBytesAvail += bytes_avail; 596 dev_dbg(dev, 597 "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", 598 __func__, bytes_avail, 599 edge_serial->rxBytesAvail, 600 edge_serial->read_in_progress); 601 602 if (edge_serial->rxBytesAvail > 0 && 603 !edge_serial->read_in_progress) { 604 dev_dbg(dev, "%s - posting a read\n", __func__); 605 edge_serial->read_in_progress = true; 606 607 /* we have pending bytes on the 608 bulk in pipe, send a request */ 609 result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); 610 if (result) { 611 dev_err(dev, 612 "%s - usb_submit_urb(read bulk) failed with result = %d\n", 613 __func__, result); 614 edge_serial->read_in_progress = false; 615 } 616 } 617 spin_unlock(&edge_serial->es_lock); 618 } 619 } 620 /* grab the txcredits for the ports if available */ 621 position = 2; 622 portNumber = 0; 623 while ((position < length) && 624 (portNumber < edge_serial->serial->num_ports)) { 625 txCredits = data[position] | (data[position+1] << 8); 626 if (txCredits) { 627 port = edge_serial->serial->port[portNumber]; 628 edge_port = usb_get_serial_port_data(port); 629 if (edge_port->open) { 630 spin_lock(&edge_port->ep_lock); 631 edge_port->txCredits += txCredits; 632 spin_unlock(&edge_port->ep_lock); 633 dev_dbg(dev, "%s - txcredits for port%d = %d\n", 634 __func__, portNumber, 635 edge_port->txCredits); 636 637 /* tell the tty driver that something 638 has changed */ 639 tty_port_tty_wakeup(&edge_port->port->port); 640 /* Since we have more credit, check 641 if more data can be sent */ 642 send_more_port_data(edge_serial, 643 edge_port); 644 } 645 } 646 position += 2; 647 ++portNumber; 648 } 649 } 650 651 exit: 652 result = usb_submit_urb(urb, GFP_ATOMIC); 653 if (result) 654 dev_err(&urb->dev->dev, 655 "%s - Error %d submitting control urb\n", 656 __func__, result); 657 } 658 659 660 /***************************************************************************** 661 * edge_bulk_in_callback 662 * this is the callback function for when we have received data on the 663 * bulk in endpoint. 664 *****************************************************************************/ 665 static void edge_bulk_in_callback(struct urb *urb) 666 { 667 struct edgeport_serial *edge_serial = urb->context; 668 struct device *dev; 669 unsigned char *data = urb->transfer_buffer; 670 int retval; 671 __u16 raw_data_length; 672 int status = urb->status; 673 674 if (status) { 675 dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", 676 __func__, status); 677 edge_serial->read_in_progress = false; 678 return; 679 } 680 681 if (urb->actual_length == 0) { 682 dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); 683 edge_serial->read_in_progress = false; 684 return; 685 } 686 687 dev = &edge_serial->serial->dev->dev; 688 raw_data_length = urb->actual_length; 689 690 usb_serial_debug_data(dev, __func__, raw_data_length, data); 691 692 spin_lock(&edge_serial->es_lock); 693 694 /* decrement our rxBytes available by the number that we just got */ 695 edge_serial->rxBytesAvail -= raw_data_length; 696 697 dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, 698 raw_data_length, edge_serial->rxBytesAvail); 699 700 process_rcvd_data(edge_serial, data, urb->actual_length); 701 702 /* check to see if there's any more data for us to read */ 703 if (edge_serial->rxBytesAvail > 0) { 704 dev_dbg(dev, "%s - posting a read\n", __func__); 705 retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); 706 if (retval) { 707 dev_err(dev, 708 "%s - usb_submit_urb(read bulk) failed, retval = %d\n", 709 __func__, retval); 710 edge_serial->read_in_progress = false; 711 } 712 } else { 713 edge_serial->read_in_progress = false; 714 } 715 716 spin_unlock(&edge_serial->es_lock); 717 } 718 719 720 /***************************************************************************** 721 * edge_bulk_out_data_callback 722 * this is the callback function for when we have finished sending 723 * serial data on the bulk out endpoint. 724 *****************************************************************************/ 725 static void edge_bulk_out_data_callback(struct urb *urb) 726 { 727 struct edgeport_port *edge_port = urb->context; 728 int status = urb->status; 729 730 if (status) { 731 dev_dbg(&urb->dev->dev, 732 "%s - nonzero write bulk status received: %d\n", 733 __func__, status); 734 } 735 736 if (edge_port->open) 737 tty_port_tty_wakeup(&edge_port->port->port); 738 739 /* Release the Write URB */ 740 edge_port->write_in_progress = false; 741 742 /* Check if more data needs to be sent */ 743 send_more_port_data((struct edgeport_serial *) 744 (usb_get_serial_data(edge_port->port->serial)), edge_port); 745 } 746 747 748 /***************************************************************************** 749 * BulkOutCmdCallback 750 * this is the callback function for when we have finished sending a 751 * command on the bulk out endpoint. 752 *****************************************************************************/ 753 static void edge_bulk_out_cmd_callback(struct urb *urb) 754 { 755 struct edgeport_port *edge_port = urb->context; 756 int status = urb->status; 757 758 atomic_dec(&CmdUrbs); 759 dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", 760 __func__, urb, atomic_read(&CmdUrbs)); 761 762 763 /* clean up the transfer buffer */ 764 kfree(urb->transfer_buffer); 765 766 /* Free the command urb */ 767 usb_free_urb(urb); 768 769 if (status) { 770 dev_dbg(&urb->dev->dev, 771 "%s - nonzero write bulk status received: %d\n", 772 __func__, status); 773 return; 774 } 775 776 /* tell the tty driver that something has changed */ 777 if (edge_port->open) 778 tty_port_tty_wakeup(&edge_port->port->port); 779 780 /* we have completed the command */ 781 edge_port->commandPending = false; 782 wake_up(&edge_port->wait_command); 783 } 784 785 786 /***************************************************************************** 787 * Driver tty interface functions 788 *****************************************************************************/ 789 790 /***************************************************************************** 791 * SerialOpen 792 * this function is called by the tty driver when a port is opened 793 * If successful, we return 0 794 * Otherwise we return a negative error number. 795 *****************************************************************************/ 796 static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) 797 { 798 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 799 struct device *dev = &port->dev; 800 struct usb_serial *serial; 801 struct edgeport_serial *edge_serial; 802 int response; 803 804 if (edge_port == NULL) 805 return -ENODEV; 806 807 /* see if we've set up our endpoint info yet (can't set it up 808 in edge_startup as the structures were not set up at that time.) */ 809 serial = port->serial; 810 edge_serial = usb_get_serial_data(serial); 811 if (edge_serial == NULL) 812 return -ENODEV; 813 if (edge_serial->interrupt_in_buffer == NULL) { 814 struct usb_serial_port *port0 = serial->port[0]; 815 816 /* not set up yet, so do it now */ 817 edge_serial->interrupt_in_buffer = 818 port0->interrupt_in_buffer; 819 edge_serial->interrupt_in_endpoint = 820 port0->interrupt_in_endpointAddress; 821 edge_serial->interrupt_read_urb = port0->interrupt_in_urb; 822 edge_serial->bulk_in_buffer = port0->bulk_in_buffer; 823 edge_serial->bulk_in_endpoint = 824 port0->bulk_in_endpointAddress; 825 edge_serial->read_urb = port0->read_urb; 826 edge_serial->bulk_out_endpoint = 827 port0->bulk_out_endpointAddress; 828 829 /* set up our interrupt urb */ 830 usb_fill_int_urb(edge_serial->interrupt_read_urb, 831 serial->dev, 832 usb_rcvintpipe(serial->dev, 833 port0->interrupt_in_endpointAddress), 834 port0->interrupt_in_buffer, 835 edge_serial->interrupt_read_urb->transfer_buffer_length, 836 edge_interrupt_callback, edge_serial, 837 edge_serial->interrupt_read_urb->interval); 838 839 /* set up our bulk in urb */ 840 usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, 841 usb_rcvbulkpipe(serial->dev, 842 port0->bulk_in_endpointAddress), 843 port0->bulk_in_buffer, 844 edge_serial->read_urb->transfer_buffer_length, 845 edge_bulk_in_callback, edge_serial); 846 edge_serial->read_in_progress = false; 847 848 /* start interrupt read for this edgeport 849 * this interrupt will continue as long 850 * as the edgeport is connected */ 851 response = usb_submit_urb(edge_serial->interrupt_read_urb, 852 GFP_KERNEL); 853 if (response) { 854 dev_err(dev, "%s - Error %d submitting control urb\n", 855 __func__, response); 856 } 857 } 858 859 /* initialize our wait queues */ 860 init_waitqueue_head(&edge_port->wait_open); 861 init_waitqueue_head(&edge_port->wait_chase); 862 init_waitqueue_head(&edge_port->wait_command); 863 864 /* initialize our port settings */ 865 edge_port->txCredits = 0; /* Can't send any data yet */ 866 /* Must always set this bit to enable ints! */ 867 edge_port->shadowMCR = MCR_MASTER_IE; 868 edge_port->chaseResponsePending = false; 869 870 /* send a open port command */ 871 edge_port->openPending = true; 872 edge_port->open = false; 873 response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); 874 875 if (response < 0) { 876 dev_err(dev, "%s - error sending open port command\n", __func__); 877 edge_port->openPending = false; 878 return -ENODEV; 879 } 880 881 /* now wait for the port to be completely opened */ 882 wait_event_timeout(edge_port->wait_open, !edge_port->openPending, 883 OPEN_TIMEOUT); 884 885 if (!edge_port->open) { 886 /* open timed out */ 887 dev_dbg(dev, "%s - open timedout\n", __func__); 888 edge_port->openPending = false; 889 return -ENODEV; 890 } 891 892 /* create the txfifo */ 893 edge_port->txfifo.head = 0; 894 edge_port->txfifo.tail = 0; 895 edge_port->txfifo.count = 0; 896 edge_port->txfifo.size = edge_port->maxTxCredits; 897 edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); 898 899 if (!edge_port->txfifo.fifo) { 900 edge_close(port); 901 return -ENOMEM; 902 } 903 904 /* Allocate a URB for the write */ 905 edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); 906 edge_port->write_in_progress = false; 907 908 if (!edge_port->write_urb) { 909 edge_close(port); 910 return -ENOMEM; 911 } 912 913 dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n", 914 __func__, edge_port->maxTxCredits); 915 916 return 0; 917 } 918 919 920 /************************************************************************ 921 * 922 * block_until_chase_response 923 * 924 * This function will block the close until one of the following: 925 * 1. Response to our Chase comes from Edgeport 926 * 2. A timeout of 10 seconds without activity has expired 927 * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) 928 * 929 ************************************************************************/ 930 static void block_until_chase_response(struct edgeport_port *edge_port) 931 { 932 struct device *dev = &edge_port->port->dev; 933 DEFINE_WAIT(wait); 934 __u16 lastCredits; 935 int timeout = 1*HZ; 936 int loop = 10; 937 938 while (1) { 939 /* Save Last credits */ 940 lastCredits = edge_port->txCredits; 941 942 /* Did we get our Chase response */ 943 if (!edge_port->chaseResponsePending) { 944 dev_dbg(dev, "%s - Got Chase Response\n", __func__); 945 946 /* did we get all of our credit back? */ 947 if (edge_port->txCredits == edge_port->maxTxCredits) { 948 dev_dbg(dev, "%s - Got all credits\n", __func__); 949 return; 950 } 951 } 952 953 /* Block the thread for a while */ 954 prepare_to_wait(&edge_port->wait_chase, &wait, 955 TASK_UNINTERRUPTIBLE); 956 schedule_timeout(timeout); 957 finish_wait(&edge_port->wait_chase, &wait); 958 959 if (lastCredits == edge_port->txCredits) { 960 /* No activity.. count down. */ 961 loop--; 962 if (loop == 0) { 963 edge_port->chaseResponsePending = false; 964 dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); 965 return; 966 } 967 } else { 968 /* Reset timeout value back to 10 seconds */ 969 dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, 970 lastCredits, edge_port->txCredits); 971 loop = 10; 972 } 973 } 974 } 975 976 977 /************************************************************************ 978 * 979 * block_until_tx_empty 980 * 981 * This function will block the close until one of the following: 982 * 1. TX count are 0 983 * 2. The edgeport has stopped 984 * 3. A timeout of 3 seconds without activity has expired 985 * 986 ************************************************************************/ 987 static void block_until_tx_empty(struct edgeport_port *edge_port) 988 { 989 struct device *dev = &edge_port->port->dev; 990 DEFINE_WAIT(wait); 991 struct TxFifo *fifo = &edge_port->txfifo; 992 __u32 lastCount; 993 int timeout = HZ/10; 994 int loop = 30; 995 996 while (1) { 997 /* Save Last count */ 998 lastCount = fifo->count; 999 1000 /* Is the Edgeport Buffer empty? */ 1001 if (lastCount == 0) { 1002 dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); 1003 return; 1004 } 1005 1006 /* Block the thread for a while */ 1007 prepare_to_wait(&edge_port->wait_chase, &wait, 1008 TASK_UNINTERRUPTIBLE); 1009 schedule_timeout(timeout); 1010 finish_wait(&edge_port->wait_chase, &wait); 1011 1012 dev_dbg(dev, "%s wait\n", __func__); 1013 1014 if (lastCount == fifo->count) { 1015 /* No activity.. count down. */ 1016 loop--; 1017 if (loop == 0) { 1018 dev_dbg(dev, "%s - TIMEOUT\n", __func__); 1019 return; 1020 } 1021 } else { 1022 /* Reset timeout value back to seconds */ 1023 loop = 30; 1024 } 1025 } 1026 } 1027 1028 1029 /***************************************************************************** 1030 * edge_close 1031 * this function is called by the tty driver when a port is closed 1032 *****************************************************************************/ 1033 static void edge_close(struct usb_serial_port *port) 1034 { 1035 struct edgeport_serial *edge_serial; 1036 struct edgeport_port *edge_port; 1037 int status; 1038 1039 edge_serial = usb_get_serial_data(port->serial); 1040 edge_port = usb_get_serial_port_data(port); 1041 if (edge_serial == NULL || edge_port == NULL) 1042 return; 1043 1044 /* block until tx is empty */ 1045 block_until_tx_empty(edge_port); 1046 1047 edge_port->closePending = true; 1048 1049 if ((!edge_serial->is_epic) || 1050 ((edge_serial->is_epic) && 1051 (edge_serial->epic_descriptor.Supports.IOSPChase))) { 1052 /* flush and chase */ 1053 edge_port->chaseResponsePending = true; 1054 1055 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); 1056 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); 1057 if (status == 0) 1058 /* block until chase finished */ 1059 block_until_chase_response(edge_port); 1060 else 1061 edge_port->chaseResponsePending = false; 1062 } 1063 1064 if ((!edge_serial->is_epic) || 1065 ((edge_serial->is_epic) && 1066 (edge_serial->epic_descriptor.Supports.IOSPClose))) { 1067 /* close the port */ 1068 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); 1069 send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); 1070 } 1071 1072 /* port->close = true; */ 1073 edge_port->closePending = false; 1074 edge_port->open = false; 1075 edge_port->openPending = false; 1076 1077 usb_kill_urb(edge_port->write_urb); 1078 1079 if (edge_port->write_urb) { 1080 /* if this urb had a transfer buffer already 1081 (old transfer) free it */ 1082 kfree(edge_port->write_urb->transfer_buffer); 1083 usb_free_urb(edge_port->write_urb); 1084 edge_port->write_urb = NULL; 1085 } 1086 kfree(edge_port->txfifo.fifo); 1087 edge_port->txfifo.fifo = NULL; 1088 } 1089 1090 /***************************************************************************** 1091 * SerialWrite 1092 * this function is called by the tty driver when data should be written 1093 * to the port. 1094 * If successful, we return the number of bytes written, otherwise we 1095 * return a negative error number. 1096 *****************************************************************************/ 1097 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, 1098 const unsigned char *data, int count) 1099 { 1100 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1101 struct TxFifo *fifo; 1102 int copySize; 1103 int bytesleft; 1104 int firsthalf; 1105 int secondhalf; 1106 unsigned long flags; 1107 1108 if (edge_port == NULL) 1109 return -ENODEV; 1110 1111 /* get a pointer to the Tx fifo */ 1112 fifo = &edge_port->txfifo; 1113 1114 spin_lock_irqsave(&edge_port->ep_lock, flags); 1115 1116 /* calculate number of bytes to put in fifo */ 1117 copySize = min((unsigned int)count, 1118 (edge_port->txCredits - fifo->count)); 1119 1120 dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n", 1121 __func__, count, edge_port->txCredits - fifo->count, copySize); 1122 1123 /* catch writes of 0 bytes which the tty driver likes to give us, 1124 and when txCredits is empty */ 1125 if (copySize == 0) { 1126 dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); 1127 goto finish_write; 1128 } 1129 1130 /* queue the data 1131 * since we can never overflow the buffer we do not have to check for a 1132 * full condition 1133 * 1134 * the copy is done is two parts -- first fill to the end of the buffer 1135 * then copy the reset from the start of the buffer 1136 */ 1137 bytesleft = fifo->size - fifo->head; 1138 firsthalf = min(bytesleft, copySize); 1139 dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, 1140 firsthalf, bytesleft); 1141 1142 /* now copy our data */ 1143 memcpy(&fifo->fifo[fifo->head], data, firsthalf); 1144 usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); 1145 1146 /* update the index and size */ 1147 fifo->head += firsthalf; 1148 fifo->count += firsthalf; 1149 1150 /* wrap the index */ 1151 if (fifo->head == fifo->size) 1152 fifo->head = 0; 1153 1154 secondhalf = copySize-firsthalf; 1155 1156 if (secondhalf) { 1157 dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); 1158 memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); 1159 usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); 1160 /* update the index and size */ 1161 fifo->count += secondhalf; 1162 fifo->head += secondhalf; 1163 /* No need to check for wrap since we can not get to end of 1164 * the fifo in this part 1165 */ 1166 } 1167 1168 finish_write: 1169 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1170 1171 send_more_port_data((struct edgeport_serial *) 1172 usb_get_serial_data(port->serial), edge_port); 1173 1174 dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", 1175 __func__, copySize, edge_port->txCredits, fifo->count); 1176 1177 return copySize; 1178 } 1179 1180 1181 /************************************************************************ 1182 * 1183 * send_more_port_data() 1184 * 1185 * This routine attempts to write additional UART transmit data 1186 * to a port over the USB bulk pipe. It is called (1) when new 1187 * data has been written to a port's TxBuffer from higher layers 1188 * (2) when the peripheral sends us additional TxCredits indicating 1189 * that it can accept more Tx data for a given port; and (3) when 1190 * a bulk write completes successfully and we want to see if we 1191 * can transmit more. 1192 * 1193 ************************************************************************/ 1194 static void send_more_port_data(struct edgeport_serial *edge_serial, 1195 struct edgeport_port *edge_port) 1196 { 1197 struct TxFifo *fifo = &edge_port->txfifo; 1198 struct device *dev = &edge_port->port->dev; 1199 struct urb *urb; 1200 unsigned char *buffer; 1201 int status; 1202 int count; 1203 int bytesleft; 1204 int firsthalf; 1205 int secondhalf; 1206 unsigned long flags; 1207 1208 spin_lock_irqsave(&edge_port->ep_lock, flags); 1209 1210 if (edge_port->write_in_progress || 1211 !edge_port->open || 1212 (fifo->count == 0)) { 1213 dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n", 1214 __func__, fifo->count, edge_port->write_in_progress); 1215 goto exit_send; 1216 } 1217 1218 /* since the amount of data in the fifo will always fit into the 1219 * edgeport buffer we do not need to check the write length 1220 * 1221 * Do we have enough credits for this port to make it worthwhile 1222 * to bother queueing a write. If it's too small, say a few bytes, 1223 * it's better to wait for more credits so we can do a larger write. 1224 */ 1225 if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { 1226 dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n", 1227 __func__, fifo->count, edge_port->txCredits); 1228 goto exit_send; 1229 } 1230 1231 /* lock this write */ 1232 edge_port->write_in_progress = true; 1233 1234 /* get a pointer to the write_urb */ 1235 urb = edge_port->write_urb; 1236 1237 /* make sure transfer buffer is freed */ 1238 kfree(urb->transfer_buffer); 1239 urb->transfer_buffer = NULL; 1240 1241 /* build the data header for the buffer and port that we are about 1242 to send out */ 1243 count = fifo->count; 1244 buffer = kmalloc(count+2, GFP_ATOMIC); 1245 if (!buffer) { 1246 edge_port->write_in_progress = false; 1247 goto exit_send; 1248 } 1249 buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count); 1250 buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count); 1251 1252 /* now copy our data */ 1253 bytesleft = fifo->size - fifo->tail; 1254 firsthalf = min(bytesleft, count); 1255 memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); 1256 fifo->tail += firsthalf; 1257 fifo->count -= firsthalf; 1258 if (fifo->tail == fifo->size) 1259 fifo->tail = 0; 1260 1261 secondhalf = count-firsthalf; 1262 if (secondhalf) { 1263 memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], 1264 secondhalf); 1265 fifo->tail += secondhalf; 1266 fifo->count -= secondhalf; 1267 } 1268 1269 if (count) 1270 usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); 1271 1272 /* fill up the urb with all of our data and submit it */ 1273 usb_fill_bulk_urb(urb, edge_serial->serial->dev, 1274 usb_sndbulkpipe(edge_serial->serial->dev, 1275 edge_serial->bulk_out_endpoint), 1276 buffer, count+2, 1277 edge_bulk_out_data_callback, edge_port); 1278 1279 /* decrement the number of credits we have by the number we just sent */ 1280 edge_port->txCredits -= count; 1281 edge_port->port->icount.tx += count; 1282 1283 status = usb_submit_urb(urb, GFP_ATOMIC); 1284 if (status) { 1285 /* something went wrong */ 1286 dev_err_console(edge_port->port, 1287 "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", 1288 __func__, status); 1289 edge_port->write_in_progress = false; 1290 1291 /* revert the credits as something bad happened. */ 1292 edge_port->txCredits += count; 1293 edge_port->port->icount.tx -= count; 1294 } 1295 dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", 1296 __func__, count, edge_port->txCredits, fifo->count); 1297 1298 exit_send: 1299 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1300 } 1301 1302 1303 /***************************************************************************** 1304 * edge_write_room 1305 * this function is called by the tty driver when it wants to know how 1306 * many bytes of data we can accept for a specific port. If successful, 1307 * we return the amount of room that we have for this port (the txCredits) 1308 * otherwise we return a negative error number. 1309 *****************************************************************************/ 1310 static int edge_write_room(struct tty_struct *tty) 1311 { 1312 struct usb_serial_port *port = tty->driver_data; 1313 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1314 int room; 1315 unsigned long flags; 1316 1317 if (edge_port == NULL) 1318 return 0; 1319 if (edge_port->closePending) 1320 return 0; 1321 1322 if (!edge_port->open) { 1323 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 1324 return 0; 1325 } 1326 1327 /* total of both buffers is still txCredit */ 1328 spin_lock_irqsave(&edge_port->ep_lock, flags); 1329 room = edge_port->txCredits - edge_port->txfifo.count; 1330 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1331 1332 dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); 1333 return room; 1334 } 1335 1336 1337 /***************************************************************************** 1338 * edge_chars_in_buffer 1339 * this function is called by the tty driver when it wants to know how 1340 * many bytes of data we currently have outstanding in the port (data that 1341 * has been written, but hasn't made it out the port yet) 1342 * If successful, we return the number of bytes left to be written in the 1343 * system, 1344 * Otherwise we return a negative error number. 1345 *****************************************************************************/ 1346 static int edge_chars_in_buffer(struct tty_struct *tty) 1347 { 1348 struct usb_serial_port *port = tty->driver_data; 1349 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1350 int num_chars; 1351 unsigned long flags; 1352 1353 if (edge_port == NULL) 1354 return 0; 1355 if (edge_port->closePending) 1356 return 0; 1357 1358 if (!edge_port->open) { 1359 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 1360 return 0; 1361 } 1362 1363 spin_lock_irqsave(&edge_port->ep_lock, flags); 1364 num_chars = edge_port->maxTxCredits - edge_port->txCredits + 1365 edge_port->txfifo.count; 1366 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1367 if (num_chars) { 1368 dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars); 1369 } 1370 1371 return num_chars; 1372 } 1373 1374 1375 /***************************************************************************** 1376 * SerialThrottle 1377 * this function is called by the tty driver when it wants to stop the data 1378 * being read from the port. 1379 *****************************************************************************/ 1380 static void edge_throttle(struct tty_struct *tty) 1381 { 1382 struct usb_serial_port *port = tty->driver_data; 1383 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1384 int status; 1385 1386 if (edge_port == NULL) 1387 return; 1388 1389 if (!edge_port->open) { 1390 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 1391 return; 1392 } 1393 1394 /* if we are implementing XON/XOFF, send the stop character */ 1395 if (I_IXOFF(tty)) { 1396 unsigned char stop_char = STOP_CHAR(tty); 1397 status = edge_write(tty, port, &stop_char, 1); 1398 if (status <= 0) 1399 return; 1400 } 1401 1402 /* if we are implementing RTS/CTS, toggle that line */ 1403 if (tty->termios.c_cflag & CRTSCTS) { 1404 edge_port->shadowMCR &= ~MCR_RTS; 1405 status = send_cmd_write_uart_register(edge_port, MCR, 1406 edge_port->shadowMCR); 1407 if (status != 0) 1408 return; 1409 } 1410 } 1411 1412 1413 /***************************************************************************** 1414 * edge_unthrottle 1415 * this function is called by the tty driver when it wants to resume the 1416 * data being read from the port (called after SerialThrottle is called) 1417 *****************************************************************************/ 1418 static void edge_unthrottle(struct tty_struct *tty) 1419 { 1420 struct usb_serial_port *port = tty->driver_data; 1421 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1422 int status; 1423 1424 if (edge_port == NULL) 1425 return; 1426 1427 if (!edge_port->open) { 1428 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 1429 return; 1430 } 1431 1432 /* if we are implementing XON/XOFF, send the start character */ 1433 if (I_IXOFF(tty)) { 1434 unsigned char start_char = START_CHAR(tty); 1435 status = edge_write(tty, port, &start_char, 1); 1436 if (status <= 0) 1437 return; 1438 } 1439 /* if we are implementing RTS/CTS, toggle that line */ 1440 if (tty->termios.c_cflag & CRTSCTS) { 1441 edge_port->shadowMCR |= MCR_RTS; 1442 send_cmd_write_uart_register(edge_port, MCR, 1443 edge_port->shadowMCR); 1444 } 1445 } 1446 1447 1448 /***************************************************************************** 1449 * SerialSetTermios 1450 * this function is called by the tty driver when it wants to change 1451 * the termios structure 1452 *****************************************************************************/ 1453 static void edge_set_termios(struct tty_struct *tty, 1454 struct usb_serial_port *port, struct ktermios *old_termios) 1455 { 1456 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1457 unsigned int cflag; 1458 1459 cflag = tty->termios.c_cflag; 1460 dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); 1461 dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); 1462 1463 if (edge_port == NULL) 1464 return; 1465 1466 if (!edge_port->open) { 1467 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 1468 return; 1469 } 1470 1471 /* change the port settings to the new ones specified */ 1472 change_port_settings(tty, edge_port, old_termios); 1473 } 1474 1475 1476 /***************************************************************************** 1477 * get_lsr_info - get line status register info 1478 * 1479 * Purpose: Let user call ioctl() to get info when the UART physically 1480 * is emptied. On bus types like RS485, the transmitter must 1481 * release the bus after transmitting. This must be done when 1482 * the transmit shift register is empty, not be done when the 1483 * transmit holding register is empty. This functionality 1484 * allows an RS485 driver to be written in user space. 1485 *****************************************************************************/ 1486 static int get_lsr_info(struct edgeport_port *edge_port, 1487 unsigned int __user *value) 1488 { 1489 unsigned int result = 0; 1490 unsigned long flags; 1491 1492 spin_lock_irqsave(&edge_port->ep_lock, flags); 1493 if (edge_port->maxTxCredits == edge_port->txCredits && 1494 edge_port->txfifo.count == 0) { 1495 dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); 1496 result = TIOCSER_TEMT; 1497 } 1498 spin_unlock_irqrestore(&edge_port->ep_lock, flags); 1499 1500 if (copy_to_user(value, &result, sizeof(int))) 1501 return -EFAULT; 1502 return 0; 1503 } 1504 1505 static int edge_tiocmset(struct tty_struct *tty, 1506 unsigned int set, unsigned int clear) 1507 { 1508 struct usb_serial_port *port = tty->driver_data; 1509 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1510 unsigned int mcr; 1511 1512 mcr = edge_port->shadowMCR; 1513 if (set & TIOCM_RTS) 1514 mcr |= MCR_RTS; 1515 if (set & TIOCM_DTR) 1516 mcr |= MCR_DTR; 1517 if (set & TIOCM_LOOP) 1518 mcr |= MCR_LOOPBACK; 1519 1520 if (clear & TIOCM_RTS) 1521 mcr &= ~MCR_RTS; 1522 if (clear & TIOCM_DTR) 1523 mcr &= ~MCR_DTR; 1524 if (clear & TIOCM_LOOP) 1525 mcr &= ~MCR_LOOPBACK; 1526 1527 edge_port->shadowMCR = mcr; 1528 1529 send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); 1530 1531 return 0; 1532 } 1533 1534 static int edge_tiocmget(struct tty_struct *tty) 1535 { 1536 struct usb_serial_port *port = tty->driver_data; 1537 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1538 unsigned int result = 0; 1539 unsigned int msr; 1540 unsigned int mcr; 1541 1542 msr = edge_port->shadowMSR; 1543 mcr = edge_port->shadowMCR; 1544 result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ 1545 | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ 1546 | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ 1547 | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ 1548 | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ 1549 | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ 1550 1551 return result; 1552 } 1553 1554 static int get_serial_info(struct edgeport_port *edge_port, 1555 struct serial_struct __user *retinfo) 1556 { 1557 struct serial_struct tmp; 1558 1559 if (!retinfo) 1560 return -EFAULT; 1561 1562 memset(&tmp, 0, sizeof(tmp)); 1563 1564 tmp.type = PORT_16550A; 1565 tmp.line = edge_port->port->minor; 1566 tmp.port = edge_port->port->port_number; 1567 tmp.irq = 0; 1568 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; 1569 tmp.xmit_fifo_size = edge_port->maxTxCredits; 1570 tmp.baud_base = 9600; 1571 tmp.close_delay = 5*HZ; 1572 tmp.closing_wait = 30*HZ; 1573 1574 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) 1575 return -EFAULT; 1576 return 0; 1577 } 1578 1579 1580 /***************************************************************************** 1581 * SerialIoctl 1582 * this function handles any ioctl calls to the driver 1583 *****************************************************************************/ 1584 static int edge_ioctl(struct tty_struct *tty, 1585 unsigned int cmd, unsigned long arg) 1586 { 1587 struct usb_serial_port *port = tty->driver_data; 1588 DEFINE_WAIT(wait); 1589 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1590 1591 switch (cmd) { 1592 case TIOCSERGETLSR: 1593 dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); 1594 return get_lsr_info(edge_port, (unsigned int __user *) arg); 1595 1596 case TIOCGSERIAL: 1597 dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); 1598 return get_serial_info(edge_port, (struct serial_struct __user *) arg); 1599 } 1600 return -ENOIOCTLCMD; 1601 } 1602 1603 1604 /***************************************************************************** 1605 * SerialBreak 1606 * this function sends a break to the port 1607 *****************************************************************************/ 1608 static void edge_break(struct tty_struct *tty, int break_state) 1609 { 1610 struct usb_serial_port *port = tty->driver_data; 1611 struct edgeport_port *edge_port = usb_get_serial_port_data(port); 1612 struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial); 1613 int status; 1614 1615 if ((!edge_serial->is_epic) || 1616 ((edge_serial->is_epic) && 1617 (edge_serial->epic_descriptor.Supports.IOSPChase))) { 1618 /* flush and chase */ 1619 edge_port->chaseResponsePending = true; 1620 1621 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); 1622 status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); 1623 if (status == 0) { 1624 /* block until chase finished */ 1625 block_until_chase_response(edge_port); 1626 } else { 1627 edge_port->chaseResponsePending = false; 1628 } 1629 } 1630 1631 if ((!edge_serial->is_epic) || 1632 ((edge_serial->is_epic) && 1633 (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { 1634 if (break_state == -1) { 1635 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); 1636 status = send_iosp_ext_cmd(edge_port, 1637 IOSP_CMD_SET_BREAK, 0); 1638 } else { 1639 dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); 1640 status = send_iosp_ext_cmd(edge_port, 1641 IOSP_CMD_CLEAR_BREAK, 0); 1642 } 1643 if (status) 1644 dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", 1645 __func__); 1646 } 1647 } 1648 1649 1650 /***************************************************************************** 1651 * process_rcvd_data 1652 * this function handles the data received on the bulk in pipe. 1653 *****************************************************************************/ 1654 static void process_rcvd_data(struct edgeport_serial *edge_serial, 1655 unsigned char *buffer, __u16 bufferLength) 1656 { 1657 struct device *dev = &edge_serial->serial->dev->dev; 1658 struct usb_serial_port *port; 1659 struct edgeport_port *edge_port; 1660 __u16 lastBufferLength; 1661 __u16 rxLen; 1662 1663 lastBufferLength = bufferLength + 1; 1664 1665 while (bufferLength > 0) { 1666 /* failsafe incase we get a message that we don't understand */ 1667 if (lastBufferLength == bufferLength) { 1668 dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); 1669 break; 1670 } 1671 lastBufferLength = bufferLength; 1672 1673 switch (edge_serial->rxState) { 1674 case EXPECT_HDR1: 1675 edge_serial->rxHeader1 = *buffer; 1676 ++buffer; 1677 --bufferLength; 1678 1679 if (bufferLength == 0) { 1680 edge_serial->rxState = EXPECT_HDR2; 1681 break; 1682 } 1683 /* otherwise, drop on through */ 1684 case EXPECT_HDR2: 1685 edge_serial->rxHeader2 = *buffer; 1686 ++buffer; 1687 --bufferLength; 1688 1689 dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, 1690 edge_serial->rxHeader1, edge_serial->rxHeader2); 1691 /* Process depending on whether this header is 1692 * data or status */ 1693 1694 if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { 1695 /* Decode this status header and go to 1696 * EXPECT_HDR1 (if we can process the status 1697 * with only 2 bytes), or go to EXPECT_HDR3 to 1698 * get the third byte. */ 1699 edge_serial->rxPort = 1700 IOSP_GET_HDR_PORT(edge_serial->rxHeader1); 1701 edge_serial->rxStatusCode = 1702 IOSP_GET_STATUS_CODE( 1703 edge_serial->rxHeader1); 1704 1705 if (!IOSP_STATUS_IS_2BYTE( 1706 edge_serial->rxStatusCode)) { 1707 /* This status needs additional bytes. 1708 * Save what we have and then wait for 1709 * more data. 1710 */ 1711 edge_serial->rxStatusParam 1712 = edge_serial->rxHeader2; 1713 edge_serial->rxState = EXPECT_HDR3; 1714 break; 1715 } 1716 /* We have all the header bytes, process the 1717 status now */ 1718 process_rcvd_status(edge_serial, 1719 edge_serial->rxHeader2, 0); 1720 edge_serial->rxState = EXPECT_HDR1; 1721 break; 1722 } else { 1723 edge_serial->rxPort = 1724 IOSP_GET_HDR_PORT(edge_serial->rxHeader1); 1725 edge_serial->rxBytesRemaining = 1726 IOSP_GET_HDR_DATA_LEN( 1727 edge_serial->rxHeader1, 1728 edge_serial->rxHeader2); 1729 dev_dbg(dev, "%s - Data for Port %u Len %u\n", 1730 __func__, 1731 edge_serial->rxPort, 1732 edge_serial->rxBytesRemaining); 1733 1734 /* ASSERT(DevExt->RxPort < DevExt->NumPorts); 1735 * ASSERT(DevExt->RxBytesRemaining < 1736 * IOSP_MAX_DATA_LENGTH); 1737 */ 1738 1739 if (bufferLength == 0) { 1740 edge_serial->rxState = EXPECT_DATA; 1741 break; 1742 } 1743 /* Else, drop through */ 1744 } 1745 case EXPECT_DATA: /* Expect data */ 1746 if (bufferLength < edge_serial->rxBytesRemaining) { 1747 rxLen = bufferLength; 1748 /* Expect data to start next buffer */ 1749 edge_serial->rxState = EXPECT_DATA; 1750 } else { 1751 /* BufLen >= RxBytesRemaining */ 1752 rxLen = edge_serial->rxBytesRemaining; 1753 /* Start another header next time */ 1754 edge_serial->rxState = EXPECT_HDR1; 1755 } 1756 1757 bufferLength -= rxLen; 1758 edge_serial->rxBytesRemaining -= rxLen; 1759 1760 /* spit this data back into the tty driver if this 1761 port is open */ 1762 if (rxLen) { 1763 port = edge_serial->serial->port[ 1764 edge_serial->rxPort]; 1765 edge_port = usb_get_serial_port_data(port); 1766 if (edge_port->open) { 1767 dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", 1768 __func__, rxLen, 1769 edge_serial->rxPort); 1770 edge_tty_recv(edge_port->port, buffer, 1771 rxLen); 1772 edge_port->port->icount.rx += rxLen; 1773 } 1774 buffer += rxLen; 1775 } 1776 break; 1777 1778 case EXPECT_HDR3: /* Expect 3rd byte of status header */ 1779 edge_serial->rxHeader3 = *buffer; 1780 ++buffer; 1781 --bufferLength; 1782 1783 /* We have all the header bytes, process the 1784 status now */ 1785 process_rcvd_status(edge_serial, 1786 edge_serial->rxStatusParam, 1787 edge_serial->rxHeader3); 1788 edge_serial->rxState = EXPECT_HDR1; 1789 break; 1790 } 1791 } 1792 } 1793 1794 1795 /***************************************************************************** 1796 * process_rcvd_status 1797 * this function handles the any status messages received on the 1798 * bulk in pipe. 1799 *****************************************************************************/ 1800 static void process_rcvd_status(struct edgeport_serial *edge_serial, 1801 __u8 byte2, __u8 byte3) 1802 { 1803 struct usb_serial_port *port; 1804 struct edgeport_port *edge_port; 1805 struct tty_struct *tty; 1806 struct device *dev; 1807 __u8 code = edge_serial->rxStatusCode; 1808 1809 /* switch the port pointer to the one being currently talked about */ 1810 port = edge_serial->serial->port[edge_serial->rxPort]; 1811 edge_port = usb_get_serial_port_data(port); 1812 if (edge_port == NULL) { 1813 dev_err(&edge_serial->serial->dev->dev, 1814 "%s - edge_port == NULL for port %d\n", 1815 __func__, edge_serial->rxPort); 1816 return; 1817 } 1818 dev = &port->dev; 1819 1820 if (code == IOSP_EXT_STATUS) { 1821 switch (byte2) { 1822 case IOSP_EXT_STATUS_CHASE_RSP: 1823 /* we want to do EXT status regardless of port 1824 * open/closed */ 1825 dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", 1826 __func__, edge_serial->rxPort, byte3); 1827 /* Currently, the only EXT_STATUS is Chase, so process 1828 * here instead of one more call to one more subroutine 1829 * If/when more EXT_STATUS, there'll be more work to do 1830 * Also, we currently clear flag and close the port 1831 * regardless of content of above's Byte3. 1832 * We could choose to do something else when Byte3 says 1833 * Timeout on Chase from Edgeport, like wait longer in 1834 * block_until_chase_response, but for now we don't. 1835 */ 1836 edge_port->chaseResponsePending = false; 1837 wake_up(&edge_port->wait_chase); 1838 return; 1839 1840 case IOSP_EXT_STATUS_RX_CHECK_RSP: 1841 dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", 1842 __func__, edge_serial->rxPort, byte3); 1843 /* Port->RxCheckRsp = true; */ 1844 return; 1845 } 1846 } 1847 1848 if (code == IOSP_STATUS_OPEN_RSP) { 1849 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); 1850 edge_port->maxTxCredits = edge_port->txCredits; 1851 dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", 1852 __func__, edge_serial->rxPort, byte2, edge_port->txCredits); 1853 handle_new_msr(edge_port, byte2); 1854 1855 /* send the current line settings to the port so we are 1856 in sync with any further termios calls */ 1857 tty = tty_port_tty_get(&edge_port->port->port); 1858 if (tty) { 1859 change_port_settings(tty, 1860 edge_port, &tty->termios); 1861 tty_kref_put(tty); 1862 } 1863 1864 /* we have completed the open */ 1865 edge_port->openPending = false; 1866 edge_port->open = true; 1867 wake_up(&edge_port->wait_open); 1868 return; 1869 } 1870 1871 /* If port is closed, silently discard all rcvd status. We can 1872 * have cases where buffered status is received AFTER the close 1873 * port command is sent to the Edgeport. 1874 */ 1875 if (!edge_port->open || edge_port->closePending) 1876 return; 1877 1878 switch (code) { 1879 /* Not currently sent by Edgeport */ 1880 case IOSP_STATUS_LSR: 1881 dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", 1882 __func__, edge_serial->rxPort, byte2); 1883 handle_new_lsr(edge_port, false, byte2, 0); 1884 break; 1885 1886 case IOSP_STATUS_LSR_DATA: 1887 dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", 1888 __func__, edge_serial->rxPort, byte2, byte3); 1889 /* byte2 is LSR Register */ 1890 /* byte3 is broken data byte */ 1891 handle_new_lsr(edge_port, true, byte2, byte3); 1892 break; 1893 /* 1894 * case IOSP_EXT_4_STATUS: 1895 * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", 1896 * __func__, edge_serial->rxPort, byte2, byte3); 1897 * break; 1898 */ 1899 case IOSP_STATUS_MSR: 1900 dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", 1901 __func__, edge_serial->rxPort, byte2); 1902 /* 1903 * Process this new modem status and generate appropriate 1904 * events, etc, based on the new status. This routine 1905 * also saves the MSR in Port->ShadowMsr. 1906 */ 1907 handle_new_msr(edge_port, byte2); 1908 break; 1909 1910 default: 1911 dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); 1912 break; 1913 } 1914 } 1915 1916 1917 /***************************************************************************** 1918 * edge_tty_recv 1919 * this function passes data on to the tty flip buffer 1920 *****************************************************************************/ 1921 static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, 1922 int length) 1923 { 1924 int cnt; 1925 1926 cnt = tty_insert_flip_string(&port->port, data, length); 1927 if (cnt < length) { 1928 dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", 1929 __func__, length - cnt); 1930 } 1931 data += cnt; 1932 length -= cnt; 1933 1934 tty_flip_buffer_push(&port->port); 1935 } 1936 1937 1938 /***************************************************************************** 1939 * handle_new_msr 1940 * this function handles any change to the msr register for a port. 1941 *****************************************************************************/ 1942 static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) 1943 { 1944 struct async_icount *icount; 1945 1946 if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | 1947 EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { 1948 icount = &edge_port->port->icount; 1949 1950 /* update input line counters */ 1951 if (newMsr & EDGEPORT_MSR_DELTA_CTS) 1952 icount->cts++; 1953 if (newMsr & EDGEPORT_MSR_DELTA_DSR) 1954 icount->dsr++; 1955 if (newMsr & EDGEPORT_MSR_DELTA_CD) 1956 icount->dcd++; 1957 if (newMsr & EDGEPORT_MSR_DELTA_RI) 1958 icount->rng++; 1959 wake_up_interruptible(&edge_port->port->port.delta_msr_wait); 1960 } 1961 1962 /* Save the new modem status */ 1963 edge_port->shadowMSR = newMsr & 0xf0; 1964 } 1965 1966 1967 /***************************************************************************** 1968 * handle_new_lsr 1969 * this function handles any change to the lsr register for a port. 1970 *****************************************************************************/ 1971 static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, 1972 __u8 lsr, __u8 data) 1973 { 1974 __u8 newLsr = (__u8) (lsr & (__u8) 1975 (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); 1976 struct async_icount *icount; 1977 1978 edge_port->shadowLSR = lsr; 1979 1980 if (newLsr & LSR_BREAK) { 1981 /* 1982 * Parity and Framing errors only count if they 1983 * occur exclusive of a break being 1984 * received. 1985 */ 1986 newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); 1987 } 1988 1989 /* Place LSR data byte into Rx buffer */ 1990 if (lsrData) 1991 edge_tty_recv(edge_port->port, &data, 1); 1992 1993 /* update input line counters */ 1994 icount = &edge_port->port->icount; 1995 if (newLsr & LSR_BREAK) 1996 icount->brk++; 1997 if (newLsr & LSR_OVER_ERR) 1998 icount->overrun++; 1999 if (newLsr & LSR_PAR_ERR) 2000 icount->parity++; 2001 if (newLsr & LSR_FRM_ERR) 2002 icount->frame++; 2003 } 2004 2005 2006 /**************************************************************************** 2007 * sram_write 2008 * writes a number of bytes to the Edgeport device's sram starting at the 2009 * given address. 2010 * If successful returns the number of bytes written, otherwise it returns 2011 * a negative error number of the problem. 2012 ****************************************************************************/ 2013 static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, 2014 __u16 length, const __u8 *data) 2015 { 2016 int result; 2017 __u16 current_length; 2018 unsigned char *transfer_buffer; 2019 2020 dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); 2021 2022 transfer_buffer = kmalloc(64, GFP_KERNEL); 2023 if (!transfer_buffer) 2024 return -ENOMEM; 2025 2026 /* need to split these writes up into 64 byte chunks */ 2027 result = 0; 2028 while (length > 0) { 2029 if (length > 64) 2030 current_length = 64; 2031 else 2032 current_length = length; 2033 2034 /* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ 2035 memcpy(transfer_buffer, data, current_length); 2036 result = usb_control_msg(serial->dev, 2037 usb_sndctrlpipe(serial->dev, 0), 2038 USB_REQUEST_ION_WRITE_RAM, 2039 0x40, addr, extAddr, transfer_buffer, 2040 current_length, 300); 2041 if (result < 0) 2042 break; 2043 length -= current_length; 2044 addr += current_length; 2045 data += current_length; 2046 } 2047 2048 kfree(transfer_buffer); 2049 return result; 2050 } 2051 2052 2053 /**************************************************************************** 2054 * rom_write 2055 * writes a number of bytes to the Edgeport device's ROM starting at the 2056 * given address. 2057 * If successful returns the number of bytes written, otherwise it returns 2058 * a negative error number of the problem. 2059 ****************************************************************************/ 2060 static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, 2061 __u16 length, const __u8 *data) 2062 { 2063 int result; 2064 __u16 current_length; 2065 unsigned char *transfer_buffer; 2066 2067 transfer_buffer = kmalloc(64, GFP_KERNEL); 2068 if (!transfer_buffer) 2069 return -ENOMEM; 2070 2071 /* need to split these writes up into 64 byte chunks */ 2072 result = 0; 2073 while (length > 0) { 2074 if (length > 64) 2075 current_length = 64; 2076 else 2077 current_length = length; 2078 memcpy(transfer_buffer, data, current_length); 2079 result = usb_control_msg(serial->dev, 2080 usb_sndctrlpipe(serial->dev, 0), 2081 USB_REQUEST_ION_WRITE_ROM, 0x40, 2082 addr, extAddr, 2083 transfer_buffer, current_length, 300); 2084 if (result < 0) 2085 break; 2086 length -= current_length; 2087 addr += current_length; 2088 data += current_length; 2089 } 2090 2091 kfree(transfer_buffer); 2092 return result; 2093 } 2094 2095 2096 /**************************************************************************** 2097 * rom_read 2098 * reads a number of bytes from the Edgeport device starting at the given 2099 * address. 2100 * If successful returns the number of bytes read, otherwise it returns 2101 * a negative error number of the problem. 2102 ****************************************************************************/ 2103 static int rom_read(struct usb_serial *serial, __u16 extAddr, 2104 __u16 addr, __u16 length, __u8 *data) 2105 { 2106 int result; 2107 __u16 current_length; 2108 unsigned char *transfer_buffer; 2109 2110 transfer_buffer = kmalloc(64, GFP_KERNEL); 2111 if (!transfer_buffer) 2112 return -ENOMEM; 2113 2114 /* need to split these reads up into 64 byte chunks */ 2115 result = 0; 2116 while (length > 0) { 2117 if (length > 64) 2118 current_length = 64; 2119 else 2120 current_length = length; 2121 result = usb_control_msg(serial->dev, 2122 usb_rcvctrlpipe(serial->dev, 0), 2123 USB_REQUEST_ION_READ_ROM, 2124 0xC0, addr, extAddr, transfer_buffer, 2125 current_length, 300); 2126 if (result < 0) 2127 break; 2128 memcpy(data, transfer_buffer, current_length); 2129 length -= current_length; 2130 addr += current_length; 2131 data += current_length; 2132 } 2133 2134 kfree(transfer_buffer); 2135 return result; 2136 } 2137 2138 2139 /**************************************************************************** 2140 * send_iosp_ext_cmd 2141 * Is used to send a IOSP message to the Edgeport device 2142 ****************************************************************************/ 2143 static int send_iosp_ext_cmd(struct edgeport_port *edge_port, 2144 __u8 command, __u8 param) 2145 { 2146 unsigned char *buffer; 2147 unsigned char *currentCommand; 2148 int length = 0; 2149 int status = 0; 2150 2151 buffer = kmalloc(10, GFP_ATOMIC); 2152 if (!buffer) 2153 return -ENOMEM; 2154 2155 currentCommand = buffer; 2156 2157 MAKE_CMD_EXT_CMD(¤tCommand, &length, edge_port->port->port_number, 2158 command, param); 2159 2160 status = write_cmd_usb(edge_port, buffer, length); 2161 if (status) { 2162 /* something bad happened, let's free up the memory */ 2163 kfree(buffer); 2164 } 2165 2166 return status; 2167 } 2168 2169 2170 /***************************************************************************** 2171 * write_cmd_usb 2172 * this function writes the given buffer out to the bulk write endpoint. 2173 *****************************************************************************/ 2174 static int write_cmd_usb(struct edgeport_port *edge_port, 2175 unsigned char *buffer, int length) 2176 { 2177 struct edgeport_serial *edge_serial = 2178 usb_get_serial_data(edge_port->port->serial); 2179 struct device *dev = &edge_port->port->dev; 2180 int status = 0; 2181 struct urb *urb; 2182 2183 usb_serial_debug_data(dev, __func__, length, buffer); 2184 2185 /* Allocate our next urb */ 2186 urb = usb_alloc_urb(0, GFP_ATOMIC); 2187 if (!urb) 2188 return -ENOMEM; 2189 2190 atomic_inc(&CmdUrbs); 2191 dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", 2192 __func__, urb, atomic_read(&CmdUrbs)); 2193 2194 usb_fill_bulk_urb(urb, edge_serial->serial->dev, 2195 usb_sndbulkpipe(edge_serial->serial->dev, 2196 edge_serial->bulk_out_endpoint), 2197 buffer, length, edge_bulk_out_cmd_callback, edge_port); 2198 2199 edge_port->commandPending = true; 2200 status = usb_submit_urb(urb, GFP_ATOMIC); 2201 2202 if (status) { 2203 /* something went wrong */ 2204 dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", 2205 __func__, status); 2206 usb_kill_urb(urb); 2207 usb_free_urb(urb); 2208 atomic_dec(&CmdUrbs); 2209 return status; 2210 } 2211 2212 #if 0 2213 wait_event(&edge_port->wait_command, !edge_port->commandPending); 2214 2215 if (edge_port->commandPending) { 2216 /* command timed out */ 2217 dev_dbg(dev, "%s - command timed out\n", __func__); 2218 status = -EINVAL; 2219 } 2220 #endif 2221 return status; 2222 } 2223 2224 2225 /***************************************************************************** 2226 * send_cmd_write_baud_rate 2227 * this function sends the proper command to change the baud rate of the 2228 * specified port. 2229 *****************************************************************************/ 2230 static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, 2231 int baudRate) 2232 { 2233 struct edgeport_serial *edge_serial = 2234 usb_get_serial_data(edge_port->port->serial); 2235 struct device *dev = &edge_port->port->dev; 2236 unsigned char *cmdBuffer; 2237 unsigned char *currCmd; 2238 int cmdLen = 0; 2239 int divisor; 2240 int status; 2241 u32 number = edge_port->port->port_number; 2242 2243 if (edge_serial->is_epic && 2244 !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { 2245 dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n", 2246 baudRate); 2247 return 0; 2248 } 2249 2250 dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate); 2251 2252 status = calc_baud_rate_divisor(dev, baudRate, &divisor); 2253 if (status) { 2254 dev_err(dev, "%s - bad baud rate\n", __func__); 2255 return status; 2256 } 2257 2258 /* Alloc memory for the string of commands. */ 2259 cmdBuffer = kmalloc(0x100, GFP_ATOMIC); 2260 if (!cmdBuffer) 2261 return -ENOMEM; 2262 2263 currCmd = cmdBuffer; 2264 2265 /* Enable access to divisor latch */ 2266 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); 2267 2268 /* Write the divisor itself */ 2269 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); 2270 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); 2271 2272 /* Restore original value to disable access to divisor latch */ 2273 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, 2274 edge_port->shadowLCR); 2275 2276 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); 2277 if (status) { 2278 /* something bad happened, let's free up the memory */ 2279 kfree(cmdBuffer); 2280 } 2281 2282 return status; 2283 } 2284 2285 2286 /***************************************************************************** 2287 * calc_baud_rate_divisor 2288 * this function calculates the proper baud rate divisor for the specified 2289 * baud rate. 2290 *****************************************************************************/ 2291 static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) 2292 { 2293 int i; 2294 __u16 custom; 2295 2296 for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { 2297 if (divisor_table[i].BaudRate == baudrate) { 2298 *divisor = divisor_table[i].Divisor; 2299 return 0; 2300 } 2301 } 2302 2303 /* We have tried all of the standard baud rates 2304 * lets try to calculate the divisor for this baud rate 2305 * Make sure the baud rate is reasonable */ 2306 if (baudrate > 50 && baudrate < 230400) { 2307 /* get divisor */ 2308 custom = (__u16)((230400L + baudrate/2) / baudrate); 2309 2310 *divisor = custom; 2311 2312 dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); 2313 return 0; 2314 } 2315 2316 return -1; 2317 } 2318 2319 2320 /***************************************************************************** 2321 * send_cmd_write_uart_register 2322 * this function builds up a uart register message and sends to the device. 2323 *****************************************************************************/ 2324 static int send_cmd_write_uart_register(struct edgeport_port *edge_port, 2325 __u8 regNum, __u8 regValue) 2326 { 2327 struct edgeport_serial *edge_serial = 2328 usb_get_serial_data(edge_port->port->serial); 2329 struct device *dev = &edge_port->port->dev; 2330 unsigned char *cmdBuffer; 2331 unsigned char *currCmd; 2332 unsigned long cmdLen = 0; 2333 int status; 2334 2335 dev_dbg(dev, "%s - write to %s register 0x%02x\n", 2336 (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); 2337 2338 if (edge_serial->is_epic && 2339 !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && 2340 regNum == MCR) { 2341 dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); 2342 return 0; 2343 } 2344 2345 if (edge_serial->is_epic && 2346 !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && 2347 regNum == LCR) { 2348 dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); 2349 return 0; 2350 } 2351 2352 /* Alloc memory for the string of commands. */ 2353 cmdBuffer = kmalloc(0x10, GFP_ATOMIC); 2354 if (cmdBuffer == NULL) 2355 return -ENOMEM; 2356 2357 currCmd = cmdBuffer; 2358 2359 /* Build a cmd in the buffer to write the given register */ 2360 MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number, 2361 regNum, regValue); 2362 2363 status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); 2364 if (status) { 2365 /* something bad happened, let's free up the memory */ 2366 kfree(cmdBuffer); 2367 } 2368 2369 return status; 2370 } 2371 2372 2373 /***************************************************************************** 2374 * change_port_settings 2375 * This routine is called to set the UART on the device to match the 2376 * specified new settings. 2377 *****************************************************************************/ 2378 2379 static void change_port_settings(struct tty_struct *tty, 2380 struct edgeport_port *edge_port, struct ktermios *old_termios) 2381 { 2382 struct device *dev = &edge_port->port->dev; 2383 struct edgeport_serial *edge_serial = 2384 usb_get_serial_data(edge_port->port->serial); 2385 int baud; 2386 unsigned cflag; 2387 __u8 mask = 0xff; 2388 __u8 lData; 2389 __u8 lParity; 2390 __u8 lStop; 2391 __u8 rxFlow; 2392 __u8 txFlow; 2393 int status; 2394 2395 if (!edge_port->open && 2396 !edge_port->openPending) { 2397 dev_dbg(dev, "%s - port not opened\n", __func__); 2398 return; 2399 } 2400 2401 cflag = tty->termios.c_cflag; 2402 2403 switch (cflag & CSIZE) { 2404 case CS5: 2405 lData = LCR_BITS_5; mask = 0x1f; 2406 dev_dbg(dev, "%s - data bits = 5\n", __func__); 2407 break; 2408 case CS6: 2409 lData = LCR_BITS_6; mask = 0x3f; 2410 dev_dbg(dev, "%s - data bits = 6\n", __func__); 2411 break; 2412 case CS7: 2413 lData = LCR_BITS_7; mask = 0x7f; 2414 dev_dbg(dev, "%s - data bits = 7\n", __func__); 2415 break; 2416 default: 2417 case CS8: 2418 lData = LCR_BITS_8; 2419 dev_dbg(dev, "%s - data bits = 8\n", __func__); 2420 break; 2421 } 2422 2423 lParity = LCR_PAR_NONE; 2424 if (cflag & PARENB) { 2425 if (cflag & CMSPAR) { 2426 if (cflag & PARODD) { 2427 lParity = LCR_PAR_MARK; 2428 dev_dbg(dev, "%s - parity = mark\n", __func__); 2429 } else { 2430 lParity = LCR_PAR_SPACE; 2431 dev_dbg(dev, "%s - parity = space\n", __func__); 2432 } 2433 } else if (cflag & PARODD) { 2434 lParity = LCR_PAR_ODD; 2435 dev_dbg(dev, "%s - parity = odd\n", __func__); 2436 } else { 2437 lParity = LCR_PAR_EVEN; 2438 dev_dbg(dev, "%s - parity = even\n", __func__); 2439 } 2440 } else { 2441 dev_dbg(dev, "%s - parity = none\n", __func__); 2442 } 2443 2444 if (cflag & CSTOPB) { 2445 lStop = LCR_STOP_2; 2446 dev_dbg(dev, "%s - stop bits = 2\n", __func__); 2447 } else { 2448 lStop = LCR_STOP_1; 2449 dev_dbg(dev, "%s - stop bits = 1\n", __func__); 2450 } 2451 2452 /* figure out the flow control settings */ 2453 rxFlow = txFlow = 0x00; 2454 if (cflag & CRTSCTS) { 2455 rxFlow |= IOSP_RX_FLOW_RTS; 2456 txFlow |= IOSP_TX_FLOW_CTS; 2457 dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); 2458 } else { 2459 dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); 2460 } 2461 2462 /* if we are implementing XON/XOFF, set the start and stop character 2463 in the device */ 2464 if (I_IXOFF(tty) || I_IXON(tty)) { 2465 unsigned char stop_char = STOP_CHAR(tty); 2466 unsigned char start_char = START_CHAR(tty); 2467 2468 if ((!edge_serial->is_epic) || 2469 ((edge_serial->is_epic) && 2470 (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) { 2471 send_iosp_ext_cmd(edge_port, 2472 IOSP_CMD_SET_XON_CHAR, start_char); 2473 send_iosp_ext_cmd(edge_port, 2474 IOSP_CMD_SET_XOFF_CHAR, stop_char); 2475 } 2476 2477 /* if we are implementing INBOUND XON/XOFF */ 2478 if (I_IXOFF(tty)) { 2479 rxFlow |= IOSP_RX_FLOW_XON_XOFF; 2480 dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", 2481 __func__, start_char, stop_char); 2482 } else { 2483 dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); 2484 } 2485 2486 /* if we are implementing OUTBOUND XON/XOFF */ 2487 if (I_IXON(tty)) { 2488 txFlow |= IOSP_TX_FLOW_XON_XOFF; 2489 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", 2490 __func__, start_char, stop_char); 2491 } else { 2492 dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); 2493 } 2494 } 2495 2496 /* Set flow control to the configured value */ 2497 if ((!edge_serial->is_epic) || 2498 ((edge_serial->is_epic) && 2499 (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow))) 2500 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow); 2501 if ((!edge_serial->is_epic) || 2502 ((edge_serial->is_epic) && 2503 (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow))) 2504 send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow); 2505 2506 2507 edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); 2508 edge_port->shadowLCR |= (lData | lParity | lStop); 2509 2510 edge_port->validDataMask = mask; 2511 2512 /* Send the updated LCR value to the EdgePort */ 2513 status = send_cmd_write_uart_register(edge_port, LCR, 2514 edge_port->shadowLCR); 2515 if (status != 0) 2516 return; 2517 2518 /* set up the MCR register and send it to the EdgePort */ 2519 edge_port->shadowMCR = MCR_MASTER_IE; 2520 if (cflag & CBAUD) 2521 edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); 2522 2523 status = send_cmd_write_uart_register(edge_port, MCR, 2524 edge_port->shadowMCR); 2525 if (status != 0) 2526 return; 2527 2528 /* Determine divisor based on baud rate */ 2529 baud = tty_get_baud_rate(tty); 2530 if (!baud) { 2531 /* pick a default, any default... */ 2532 baud = 9600; 2533 } 2534 2535 dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); 2536 status = send_cmd_write_baud_rate(edge_port, baud); 2537 if (status == -1) { 2538 /* Speed change was not possible - put back the old speed */ 2539 baud = tty_termios_baud_rate(old_termios); 2540 tty_encode_baud_rate(tty, baud, baud); 2541 } 2542 } 2543 2544 2545 /**************************************************************************** 2546 * unicode_to_ascii 2547 * Turns a string from Unicode into ASCII. 2548 * Doesn't do a good job with any characters that are outside the normal 2549 * ASCII range, but it's only for debugging... 2550 * NOTE: expects the unicode in LE format 2551 ****************************************************************************/ 2552 static void unicode_to_ascii(char *string, int buflen, 2553 __le16 *unicode, int unicode_size) 2554 { 2555 int i; 2556 2557 if (buflen <= 0) /* never happens, but... */ 2558 return; 2559 --buflen; /* space for nul */ 2560 2561 for (i = 0; i < unicode_size; i++) { 2562 if (i >= buflen) 2563 break; 2564 string[i] = (char)(le16_to_cpu(unicode[i])); 2565 } 2566 string[i] = 0x00; 2567 } 2568 2569 2570 /**************************************************************************** 2571 * get_manufacturing_desc 2572 * reads in the manufacturing descriptor and stores it into the serial 2573 * structure. 2574 ****************************************************************************/ 2575 static void get_manufacturing_desc(struct edgeport_serial *edge_serial) 2576 { 2577 struct device *dev = &edge_serial->serial->dev->dev; 2578 int response; 2579 2580 dev_dbg(dev, "getting manufacturer descriptor\n"); 2581 2582 response = rom_read(edge_serial->serial, 2583 (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, 2584 (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), 2585 EDGE_MANUF_DESC_LEN, 2586 (__u8 *)(&edge_serial->manuf_descriptor)); 2587 2588 if (response < 1) 2589 dev_err(dev, "error in getting manufacturer descriptor\n"); 2590 else { 2591 char string[30]; 2592 dev_dbg(dev, "**Manufacturer Descriptor\n"); 2593 dev_dbg(dev, " RomSize: %dK\n", 2594 edge_serial->manuf_descriptor.RomSize); 2595 dev_dbg(dev, " RamSize: %dK\n", 2596 edge_serial->manuf_descriptor.RamSize); 2597 dev_dbg(dev, " CpuRev: %d\n", 2598 edge_serial->manuf_descriptor.CpuRev); 2599 dev_dbg(dev, " BoardRev: %d\n", 2600 edge_serial->manuf_descriptor.BoardRev); 2601 dev_dbg(dev, " NumPorts: %d\n", 2602 edge_serial->manuf_descriptor.NumPorts); 2603 dev_dbg(dev, " DescDate: %d/%d/%d\n", 2604 edge_serial->manuf_descriptor.DescDate[0], 2605 edge_serial->manuf_descriptor.DescDate[1], 2606 edge_serial->manuf_descriptor.DescDate[2]+1900); 2607 unicode_to_ascii(string, sizeof(string), 2608 edge_serial->manuf_descriptor.SerialNumber, 2609 edge_serial->manuf_descriptor.SerNumLength/2); 2610 dev_dbg(dev, " SerialNumber: %s\n", string); 2611 unicode_to_ascii(string, sizeof(string), 2612 edge_serial->manuf_descriptor.AssemblyNumber, 2613 edge_serial->manuf_descriptor.AssemblyNumLength/2); 2614 dev_dbg(dev, " AssemblyNumber: %s\n", string); 2615 unicode_to_ascii(string, sizeof(string), 2616 edge_serial->manuf_descriptor.OemAssyNumber, 2617 edge_serial->manuf_descriptor.OemAssyNumLength/2); 2618 dev_dbg(dev, " OemAssyNumber: %s\n", string); 2619 dev_dbg(dev, " UartType: %d\n", 2620 edge_serial->manuf_descriptor.UartType); 2621 dev_dbg(dev, " IonPid: %d\n", 2622 edge_serial->manuf_descriptor.IonPid); 2623 dev_dbg(dev, " IonConfig: %d\n", 2624 edge_serial->manuf_descriptor.IonConfig); 2625 } 2626 } 2627 2628 2629 /**************************************************************************** 2630 * get_boot_desc 2631 * reads in the bootloader descriptor and stores it into the serial 2632 * structure. 2633 ****************************************************************************/ 2634 static void get_boot_desc(struct edgeport_serial *edge_serial) 2635 { 2636 struct device *dev = &edge_serial->serial->dev->dev; 2637 int response; 2638 2639 dev_dbg(dev, "getting boot descriptor\n"); 2640 2641 response = rom_read(edge_serial->serial, 2642 (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, 2643 (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), 2644 EDGE_BOOT_DESC_LEN, 2645 (__u8 *)(&edge_serial->boot_descriptor)); 2646 2647 if (response < 1) 2648 dev_err(dev, "error in getting boot descriptor\n"); 2649 else { 2650 dev_dbg(dev, "**Boot Descriptor:\n"); 2651 dev_dbg(dev, " BootCodeLength: %d\n", 2652 le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); 2653 dev_dbg(dev, " MajorVersion: %d\n", 2654 edge_serial->boot_descriptor.MajorVersion); 2655 dev_dbg(dev, " MinorVersion: %d\n", 2656 edge_serial->boot_descriptor.MinorVersion); 2657 dev_dbg(dev, " BuildNumber: %d\n", 2658 le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); 2659 dev_dbg(dev, " Capabilities: 0x%x\n", 2660 le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); 2661 dev_dbg(dev, " UConfig0: %d\n", 2662 edge_serial->boot_descriptor.UConfig0); 2663 dev_dbg(dev, " UConfig1: %d\n", 2664 edge_serial->boot_descriptor.UConfig1); 2665 } 2666 } 2667 2668 2669 /**************************************************************************** 2670 * load_application_firmware 2671 * This is called to load the application firmware to the device 2672 ****************************************************************************/ 2673 static void load_application_firmware(struct edgeport_serial *edge_serial) 2674 { 2675 struct device *dev = &edge_serial->serial->dev->dev; 2676 const struct ihex_binrec *rec; 2677 const struct firmware *fw; 2678 const char *fw_name; 2679 const char *fw_info; 2680 int response; 2681 __u32 Operaddr; 2682 __u16 build; 2683 2684 switch (edge_serial->product_info.iDownloadFile) { 2685 case EDGE_DOWNLOAD_FILE_I930: 2686 fw_info = "downloading firmware version (930)"; 2687 fw_name = "edgeport/down.fw"; 2688 break; 2689 2690 case EDGE_DOWNLOAD_FILE_80251: 2691 fw_info = "downloading firmware version (80251)"; 2692 fw_name = "edgeport/down2.fw"; 2693 break; 2694 2695 case EDGE_DOWNLOAD_FILE_NONE: 2696 dev_dbg(dev, "No download file specified, skipping download\n"); 2697 return; 2698 2699 default: 2700 return; 2701 } 2702 2703 response = request_ihex_firmware(&fw, fw_name, 2704 &edge_serial->serial->dev->dev); 2705 if (response) { 2706 dev_err(dev, "Failed to load image \"%s\" err %d\n", 2707 fw_name, response); 2708 return; 2709 } 2710 2711 rec = (const struct ihex_binrec *)fw->data; 2712 build = (rec->data[2] << 8) | rec->data[3]; 2713 2714 dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); 2715 2716 edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; 2717 edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; 2718 edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); 2719 2720 for (rec = ihex_next_binrec(rec); rec; 2721 rec = ihex_next_binrec(rec)) { 2722 Operaddr = be32_to_cpu(rec->addr); 2723 response = sram_write(edge_serial->serial, 2724 Operaddr >> 16, 2725 Operaddr & 0xFFFF, 2726 be16_to_cpu(rec->len), 2727 &rec->data[0]); 2728 if (response < 0) { 2729 dev_err(&edge_serial->serial->dev->dev, 2730 "sram_write failed (%x, %x, %d)\n", 2731 Operaddr >> 16, Operaddr & 0xFFFF, 2732 be16_to_cpu(rec->len)); 2733 break; 2734 } 2735 } 2736 2737 dev_dbg(dev, "sending exec_dl_code\n"); 2738 response = usb_control_msg (edge_serial->serial->dev, 2739 usb_sndctrlpipe(edge_serial->serial->dev, 0), 2740 USB_REQUEST_ION_EXEC_DL_CODE, 2741 0x40, 0x4000, 0x0001, NULL, 0, 3000); 2742 2743 release_firmware(fw); 2744 } 2745 2746 2747 /**************************************************************************** 2748 * edge_startup 2749 ****************************************************************************/ 2750 static int edge_startup(struct usb_serial *serial) 2751 { 2752 struct edgeport_serial *edge_serial; 2753 struct usb_device *dev; 2754 struct device *ddev = &serial->dev->dev; 2755 int i; 2756 int response; 2757 bool interrupt_in_found; 2758 bool bulk_in_found; 2759 bool bulk_out_found; 2760 static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, 2761 EDGE_COMPATIBILITY_MASK1, 2762 EDGE_COMPATIBILITY_MASK2 }; 2763 2764 dev = serial->dev; 2765 2766 /* create our private serial structure */ 2767 edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); 2768 if (!edge_serial) 2769 return -ENOMEM; 2770 2771 spin_lock_init(&edge_serial->es_lock); 2772 edge_serial->serial = serial; 2773 usb_set_serial_data(serial, edge_serial); 2774 2775 /* get the name for the device from the device */ 2776 i = usb_string(dev, dev->descriptor.iManufacturer, 2777 &edge_serial->name[0], MAX_NAME_LEN+1); 2778 if (i < 0) 2779 i = 0; 2780 edge_serial->name[i++] = ' '; 2781 usb_string(dev, dev->descriptor.iProduct, 2782 &edge_serial->name[i], MAX_NAME_LEN+2 - i); 2783 2784 dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); 2785 2786 /* Read the epic descriptor */ 2787 if (get_epic_descriptor(edge_serial) <= 0) { 2788 /* memcpy descriptor to Supports structures */ 2789 memcpy(&edge_serial->epic_descriptor.Supports, descriptor, 2790 sizeof(struct edge_compatibility_bits)); 2791 2792 /* get the manufacturing descriptor for this device */ 2793 get_manufacturing_desc(edge_serial); 2794 2795 /* get the boot descriptor */ 2796 get_boot_desc(edge_serial); 2797 2798 get_product_info(edge_serial); 2799 } 2800 2801 /* set the number of ports from the manufacturing description */ 2802 /* serial->num_ports = serial->product_info.NumPorts; */ 2803 if ((!edge_serial->is_epic) && 2804 (edge_serial->product_info.NumPorts != serial->num_ports)) { 2805 dev_warn(ddev, 2806 "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", 2807 edge_serial->product_info.NumPorts, 2808 serial->num_ports); 2809 } 2810 2811 dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); 2812 2813 /* If not an EPiC device */ 2814 if (!edge_serial->is_epic) { 2815 /* now load the application firmware into this device */ 2816 load_application_firmware(edge_serial); 2817 2818 dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); 2819 2820 /* Check current Edgeport EEPROM and update if necessary */ 2821 update_edgeport_E2PROM(edge_serial); 2822 2823 dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); 2824 2825 /* set the configuration to use #1 */ 2826 /* dev_dbg(ddev, "set_configuration 1\n"); */ 2827 /* usb_set_configuration (dev, 1); */ 2828 } 2829 dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", 2830 edge_serial->product_info.FirmwareMajorVersion, 2831 edge_serial->product_info.FirmwareMinorVersion, 2832 le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); 2833 2834 /* we set up the pointers to the endpoints in the edge_open function, 2835 * as the structures aren't created yet. */ 2836 2837 response = 0; 2838 2839 if (edge_serial->is_epic) { 2840 /* EPIC thing, set up our interrupt polling now and our read 2841 * urb, so that the device knows it really is connected. */ 2842 interrupt_in_found = bulk_in_found = bulk_out_found = false; 2843 for (i = 0; i < serial->interface->altsetting[0] 2844 .desc.bNumEndpoints; ++i) { 2845 struct usb_endpoint_descriptor *endpoint; 2846 int buffer_size; 2847 2848 endpoint = &serial->interface->altsetting[0]. 2849 endpoint[i].desc; 2850 buffer_size = usb_endpoint_maxp(endpoint); 2851 if (!interrupt_in_found && 2852 (usb_endpoint_is_int_in(endpoint))) { 2853 /* we found a interrupt in endpoint */ 2854 dev_dbg(ddev, "found interrupt in\n"); 2855 2856 /* not set up yet, so do it now */ 2857 edge_serial->interrupt_read_urb = 2858 usb_alloc_urb(0, GFP_KERNEL); 2859 if (!edge_serial->interrupt_read_urb) 2860 return -ENOMEM; 2861 2862 edge_serial->interrupt_in_buffer = 2863 kmalloc(buffer_size, GFP_KERNEL); 2864 if (!edge_serial->interrupt_in_buffer) { 2865 usb_free_urb(edge_serial->interrupt_read_urb); 2866 return -ENOMEM; 2867 } 2868 edge_serial->interrupt_in_endpoint = 2869 endpoint->bEndpointAddress; 2870 2871 /* set up our interrupt urb */ 2872 usb_fill_int_urb( 2873 edge_serial->interrupt_read_urb, 2874 dev, 2875 usb_rcvintpipe(dev, 2876 endpoint->bEndpointAddress), 2877 edge_serial->interrupt_in_buffer, 2878 buffer_size, 2879 edge_interrupt_callback, 2880 edge_serial, 2881 endpoint->bInterval); 2882 2883 interrupt_in_found = true; 2884 } 2885 2886 if (!bulk_in_found && 2887 (usb_endpoint_is_bulk_in(endpoint))) { 2888 /* we found a bulk in endpoint */ 2889 dev_dbg(ddev, "found bulk in\n"); 2890 2891 /* not set up yet, so do it now */ 2892 edge_serial->read_urb = 2893 usb_alloc_urb(0, GFP_KERNEL); 2894 if (!edge_serial->read_urb) 2895 return -ENOMEM; 2896 2897 edge_serial->bulk_in_buffer = 2898 kmalloc(buffer_size, GFP_KERNEL); 2899 if (!edge_serial->bulk_in_buffer) { 2900 usb_free_urb(edge_serial->read_urb); 2901 return -ENOMEM; 2902 } 2903 edge_serial->bulk_in_endpoint = 2904 endpoint->bEndpointAddress; 2905 2906 /* set up our bulk in urb */ 2907 usb_fill_bulk_urb(edge_serial->read_urb, dev, 2908 usb_rcvbulkpipe(dev, 2909 endpoint->bEndpointAddress), 2910 edge_serial->bulk_in_buffer, 2911 usb_endpoint_maxp(endpoint), 2912 edge_bulk_in_callback, 2913 edge_serial); 2914 bulk_in_found = true; 2915 } 2916 2917 if (!bulk_out_found && 2918 (usb_endpoint_is_bulk_out(endpoint))) { 2919 /* we found a bulk out endpoint */ 2920 dev_dbg(ddev, "found bulk out\n"); 2921 edge_serial->bulk_out_endpoint = 2922 endpoint->bEndpointAddress; 2923 bulk_out_found = true; 2924 } 2925 } 2926 2927 if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { 2928 dev_err(ddev, "Error - the proper endpoints were not found!\n"); 2929 return -ENODEV; 2930 } 2931 2932 /* start interrupt read for this edgeport this interrupt will 2933 * continue as long as the edgeport is connected */ 2934 response = usb_submit_urb(edge_serial->interrupt_read_urb, 2935 GFP_KERNEL); 2936 if (response) 2937 dev_err(ddev, "%s - Error %d submitting control urb\n", 2938 __func__, response); 2939 } 2940 return response; 2941 } 2942 2943 2944 /**************************************************************************** 2945 * edge_disconnect 2946 * This function is called whenever the device is removed from the usb bus. 2947 ****************************************************************************/ 2948 static void edge_disconnect(struct usb_serial *serial) 2949 { 2950 struct edgeport_serial *edge_serial = usb_get_serial_data(serial); 2951 2952 /* stop reads and writes on all ports */ 2953 /* free up our endpoint stuff */ 2954 if (edge_serial->is_epic) { 2955 usb_kill_urb(edge_serial->interrupt_read_urb); 2956 usb_free_urb(edge_serial->interrupt_read_urb); 2957 kfree(edge_serial->interrupt_in_buffer); 2958 2959 usb_kill_urb(edge_serial->read_urb); 2960 usb_free_urb(edge_serial->read_urb); 2961 kfree(edge_serial->bulk_in_buffer); 2962 } 2963 } 2964 2965 2966 /**************************************************************************** 2967 * edge_release 2968 * This function is called when the device structure is deallocated. 2969 ****************************************************************************/ 2970 static void edge_release(struct usb_serial *serial) 2971 { 2972 struct edgeport_serial *edge_serial = usb_get_serial_data(serial); 2973 2974 kfree(edge_serial); 2975 } 2976 2977 static int edge_port_probe(struct usb_serial_port *port) 2978 { 2979 struct edgeport_port *edge_port; 2980 2981 edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); 2982 if (!edge_port) 2983 return -ENOMEM; 2984 2985 spin_lock_init(&edge_port->ep_lock); 2986 edge_port->port = port; 2987 2988 usb_set_serial_port_data(port, edge_port); 2989 2990 return 0; 2991 } 2992 2993 static int edge_port_remove(struct usb_serial_port *port) 2994 { 2995 struct edgeport_port *edge_port; 2996 2997 edge_port = usb_get_serial_port_data(port); 2998 kfree(edge_port); 2999 3000 return 0; 3001 } 3002 3003 module_usb_serial_driver(serial_drivers, id_table_combined); 3004 3005 MODULE_AUTHOR(DRIVER_AUTHOR); 3006 MODULE_DESCRIPTION(DRIVER_DESC); 3007 MODULE_LICENSE("GPL"); 3008 MODULE_FIRMWARE("edgeport/boot.fw"); 3009 MODULE_FIRMWARE("edgeport/boot2.fw"); 3010 MODULE_FIRMWARE("edgeport/down.fw"); 3011 MODULE_FIRMWARE("edgeport/down2.fw"); 3012