1 /* 2 * Definitions for the FTDI USB Single Port Serial Converter - 3 * known as FTDI_SIO (Serial Input/Output application of the chipset) 4 * 5 * The example I have is known as the USC-1000 which is available from 6 * http://www.dse.co.nz - cat no XH4214 It looks similar to this: 7 * http://www.dansdata.com/usbser.htm but I can't be sure There are other 8 * USC-1000s which don't look like my device though so beware! 9 * 10 * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, 11 * USB on the other. 12 * 13 * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details 14 * of the protocol required to talk to the device and ongoing assistence 15 * during development. 16 * 17 * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the 18 * FTDI_SIO implementation. 19 * 20 * Philipp G�hring - pg@futureware.at - added the Device ID of the USB relais 21 * from Rudolf Gugler 22 * 23 */ 24 25 #define FTDI_VID 0x0403 /* Vendor Id */ 26 #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ 27 #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ 28 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ 29 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ 30 #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ 31 #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ 32 #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ 33 #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ 34 #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ 35 36 37 /* www.canusb.com Lawicel CANUSB device */ 38 #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ 39 40 /* AlphaMicro Components AMC-232USB01 device */ 41 #define FTDI_AMC232_PID 0xFF00 /* Product Id */ 42 43 /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ 44 #define FTDI_ACTZWAVE_PID 0xF2D0 45 46 47 /* www.starting-point-systems.com �Chameleon device */ 48 #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ 49 50 /* www.irtrans.de device */ 51 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ 52 53 54 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ 55 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ 56 57 /* iPlus device */ 58 #define FTDI_IPLUS_PID 0xD070 /* Product Id */ 59 #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ 60 61 /* DMX4ALL DMX Interfaces */ 62 #define FTDI_DMX4ALL 0xC850 63 64 /* OpenDCC (www.opendcc.de) product id */ 65 #define FTDI_OPENDCC_PID 0xBFD8 66 67 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ 68 /* they use the ftdi chipset for the USB interface and the vendor id is the same */ 69 #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ 70 #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ 71 #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ 72 #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ 73 #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ 74 #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ 75 #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ 76 #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ 77 78 /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ 79 /* broadband internet service. The following PID is exhibited by the usb device supplied */ 80 /* (the VID is the standard ftdi vid (FTDI_VID) */ 81 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ 82 83 /* 84 * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device 85 * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) 86 * (the VID is the standard ftdi vid (FTDI_VID) */ 87 #define FTDI_PCDJ_DAC2_PID 0xFA88 88 89 /* 90 * The following are the values for the Matrix Orbital LCD displays, 91 * which are the FT232BM ( similar to the 8U232AM ) 92 */ 93 #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ 94 #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ 95 #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ 96 #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ 97 #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ 98 #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ 99 #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ 100 101 /* Interbiometrics USB I/O Board */ 102 /* Developed for Interbiometrics by Rudolf Gugler */ 103 #define INTERBIOMETRICS_VID 0x1209 104 #define INTERBIOMETRICS_IOBOARD_PID 0x1002 105 #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 106 107 /* 108 * The following are the values for the Perle Systems 109 * UltraPort USB serial converters 110 */ 111 #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ 112 113 /* 114 * The following are the values for the Sealevel SeaLINK+ adapters. 115 * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and 116 * removed some PIDs that don't seem to match any existing products.) 117 */ 118 #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ 119 #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ 120 #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ 121 #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ 122 #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ 123 #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ 124 #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ 125 #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ 126 #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ 127 #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ 128 #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ 129 #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ 130 #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ 131 #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ 132 #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ 133 #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ 134 #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ 135 #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ 136 #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ 137 #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ 138 #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ 139 #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ 140 #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ 141 #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ 142 #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ 143 #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ 144 #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ 145 #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ 146 #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ 147 #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ 148 #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ 149 #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ 150 #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ 151 #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ 152 #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ 153 #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ 154 #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ 155 #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ 156 #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ 157 #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ 158 #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ 159 #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ 160 #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ 161 #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ 162 #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ 163 #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ 164 #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ 165 #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ 166 167 /* 168 * The following are the values for two KOBIL chipcard terminals. 169 */ 170 #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ 171 #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ 172 #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ 173 174 /* 175 * Icom ID-1 digital transceiver 176 */ 177 178 #define ICOM_ID1_VID 0x0C26 179 #define ICOM_ID1_PID 0x0004 180 181 /* 182 * ASK.fr devices 183 */ 184 #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ 185 186 /* 187 * FTDI USB UART chips used in construction projects from the 188 * Elektor Electronics magazine (http://elektor-electronics.co.uk) 189 */ 190 #define ELEKTOR_VID 0x0C7D 191 #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ 192 193 /* 194 * DSS-20 Sync Station for Sony Ericsson P800 195 */ 196 #define FTDI_DSS20_PID 0xFC82 197 198 /* 199 * Home Electronics (www.home-electro.com) USB gadgets 200 */ 201 #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ 202 203 /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ 204 /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ 205 #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ 206 207 /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ 208 209 #define FTDI_TNC_X_PID 0xEBE0 210 211 /* 212 * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). 213 * All of these devices use FTDI's vendor ID (0x0403). 214 * 215 * The previously included PID for the UO 100 module was incorrect. 216 * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). 217 * 218 * Armin Laeuger originally sent the PID for the UM 100 module. 219 */ 220 #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ 221 #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ 222 #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ 223 #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ 224 /* Additional ELV PIDs that default to using the FTDI D2XX drivers on 225 * MS Windows, rather than the FTDI Virtual Com Port drivers. 226 * Maybe these will be easier to use with the libftdi/libusb user-space 227 * drivers, or possibly the Comedi drivers in some cases. */ 228 #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ 229 #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ 230 #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ 231 #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ 232 #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ 233 #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ 234 #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ 235 #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ 236 #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ 237 #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ 238 #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ 239 #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ 240 #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ 241 #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ 242 #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ 243 #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ 244 #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ 245 #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ 246 #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ 247 #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ 248 249 /* 250 * Definitions for ID TECH (www.idt-net.com) devices 251 */ 252 #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ 253 #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ 254 255 /* 256 * Definitions for Omnidirectional Control Technology, Inc. devices 257 */ 258 #define OCT_VID 0x0B39 /* OCT vendor ID */ 259 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ 260 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ 261 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ 262 #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ 263 264 /* an infrared receiver for user access control with IR tags */ 265 #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ 266 267 /* 268 * Definitions for Artemis astronomical USB based cameras 269 * Check it at http://www.artemisccd.co.uk/ 270 */ 271 #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ 272 273 /* 274 * Definitions for ATIK Instruments astronomical USB based cameras 275 * Check it at http://www.atik-instruments.com/ 276 */ 277 #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ 278 #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ 279 #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ 280 #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ 281 282 /* 283 * Protego product ids 284 */ 285 #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ 286 #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ 287 #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ 288 #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ 289 290 /* 291 * Gude Analog- und Digitalsysteme GmbH 292 */ 293 #define FTDI_GUDEADS_E808_PID 0xE808 294 #define FTDI_GUDEADS_E809_PID 0xE809 295 #define FTDI_GUDEADS_E80A_PID 0xE80A 296 #define FTDI_GUDEADS_E80B_PID 0xE80B 297 #define FTDI_GUDEADS_E80C_PID 0xE80C 298 #define FTDI_GUDEADS_E80D_PID 0xE80D 299 #define FTDI_GUDEADS_E80E_PID 0xE80E 300 #define FTDI_GUDEADS_E80F_PID 0xE80F 301 #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ 302 #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ 303 #define FTDI_GUDEADS_E88A_PID 0xE88A 304 #define FTDI_GUDEADS_E88B_PID 0xE88B 305 #define FTDI_GUDEADS_E88C_PID 0xE88C 306 #define FTDI_GUDEADS_E88D_PID 0xE88D 307 #define FTDI_GUDEADS_E88E_PID 0xE88E 308 #define FTDI_GUDEADS_E88F_PID 0xE88F 309 310 /* 311 * Linx Technologies product ids 312 */ 313 #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ 314 #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ 315 #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ 316 #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ 317 #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ 318 319 /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ 320 /* unit for PIC16's/PIC18's */ 321 #define FTDI_CCSICDU20_0_PID 0xF9D0 322 #define FTDI_CCSICDU40_1_PID 0xF9D1 323 #define FTDI_CCSMACHX_2_PID 0xF9D2 324 325 /* Inside Accesso contactless reader (http://www.insidefr.com) */ 326 #define INSIDE_ACCESSO 0xFAD0 327 328 /* 329 * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI 330 */ 331 #define INTREPID_VID 0x093C 332 #define INTREPID_VALUECAN_PID 0x0601 333 #define INTREPID_NEOVI_PID 0x0701 334 335 /* 336 * Falcom Wireless Communications GmbH 337 */ 338 #define FALCOM_VID 0x0F94 /* Vendor Id */ 339 #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ 340 #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ 341 342 /* 343 * SUUNTO product ids 344 */ 345 #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ 346 347 /* 348 * TTi (Thurlby Thandar Instruments) 349 */ 350 #define TTI_VID 0x103E /* Vendor Id */ 351 #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ 352 353 /* 354 * Definitions for B&B Electronics products. 355 */ 356 #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ 357 #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ 358 #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ 359 #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ 360 361 /* 362 * RM Michaelides CANview USB (http://www.rmcan.com) 363 * CAN fieldbus interface adapter, added by port GmbH www.port.de) 364 * Ian Abbott changed the macro names for consistency. 365 */ 366 #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ 367 368 /* 369 * EVER Eco Pro UPS (http://www.ever.com.pl/) 370 */ 371 372 #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ 373 374 /* 375 * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, 376 * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices 377 * and I'm not entirely sure which are used by which. 378 */ 379 #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 380 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 381 382 /* 383 * Mobility Electronics products. 384 */ 385 #define MOBILITY_VID 0x1342 386 #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ 387 388 /* 389 * microHAM product IDs (http://www.microham.com). 390 * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> 391 * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. 392 * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. 393 */ 394 #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ 395 #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ 396 #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ 397 #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ 398 #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ 399 #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ 400 #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ 401 #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ 402 403 /* 404 * Active Robots product ids. 405 */ 406 #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ 407 408 /* 409 * Xsens Technologies BV products (http://www.xsens.com). 410 */ 411 #define XSENS_CONVERTER_0_PID 0xD388 412 #define XSENS_CONVERTER_1_PID 0xD389 413 #define XSENS_CONVERTER_2_PID 0xD38A 414 #define XSENS_CONVERTER_3_PID 0xD38B 415 #define XSENS_CONVERTER_4_PID 0xD38C 416 #define XSENS_CONVERTER_5_PID 0xD38D 417 #define XSENS_CONVERTER_6_PID 0xD38E 418 #define XSENS_CONVERTER_7_PID 0xD38F 419 420 /* 421 * Teratronik product ids. 422 * Submitted by O. W�lfelschneider. 423 */ 424 #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ 425 #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ 426 427 /* 428 * Evolution Robotics products (http://www.evolution.com/). 429 * Submitted by Shawn M. Lavelle. 430 */ 431 #define EVOLUTION_VID 0xDEEE /* Vendor ID */ 432 #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ 433 434 /* Pyramid Computer GmbH */ 435 #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ 436 437 /* 438 * Posiflex inc retail equipment (http://www.posiflex.com.tw) 439 */ 440 #define POSIFLEX_VID 0x0d3a /* Vendor ID */ 441 #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ 442 443 /* 444 * Westrex International devices submitted by Cory Lee 445 */ 446 #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ 447 #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ 448 449 /* 450 * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) 451 */ 452 #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ 453 454 /* 455 * Eclo (http://www.eclo.pt/) product IDs. 456 * PID 0xEA90 submitted by Martin Grill. 457 */ 458 #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ 459 460 /* 461 * Papouch products (http://www.papouch.com/) 462 * Submitted by Folkert van Heusden 463 */ 464 465 #define PAPOUCH_VID 0x5050 /* Vendor ID */ 466 #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ 467 468 /* 469 * ACG Identification Technologies GmbH products (http://www.acg.de/). 470 * Submitted by anton -at- goto10 -dot- org. 471 */ 472 #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ 473 474 /* 475 * Yost Engineering, Inc. products (www.yostengineering.com). 476 * PID 0xE050 submitted by Aaron Prose. 477 */ 478 #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ 479 480 /* 481 * ThorLabs USB motor drivers 482 */ 483 #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ 484 485 /* 486 * Testo products (http://www.testo.com/) 487 * Submitted by Colin Leroy 488 */ 489 #define TESTO_VID 0x128D 490 #define TESTO_USB_INTERFACE_PID 0x0001 491 492 /* 493 * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. 494 */ 495 #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ 496 497 /* 498 * Tactrix OpenPort (ECU) devices. 499 * OpenPort 1.3M submitted by Donour Sizemore. 500 * OpenPort 1.3S and 1.3U submitted by Ian Abbott. 501 */ 502 #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ 503 #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ 504 #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ 505 506 /* 507 * Telldus Technologies 508 */ 509 #define TELLDUS_VID 0x1781 /* Vendor ID */ 510 #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ 511 512 /* 513 * IBS elektronik product ids 514 * Submitted by Thomas Schleusener 515 */ 516 #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ 517 #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ 518 #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ 519 #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ 520 #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ 521 #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ 522 #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ 523 #define FTDI_IBS_PROD_PID 0xff3f /* future device */ 524 525 /* 526 * MaxStream devices www.maxstream.net 527 */ 528 #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ 529 530 /* Olimex */ 531 #define OLIMEX_VID 0x15BA 532 #define OLIMEX_ARM_USB_OCD_PID 0x0003 533 534 /* Commands */ 535 #define FTDI_SIO_RESET 0 /* Reset the port */ 536 #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ 537 #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ 538 #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ 539 #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ 540 #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ 541 #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ 542 #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ 543 #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ 544 #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ 545 546 547 /* 548 * BmRequestType: 1100 0000b 549 * bRequest: FTDI_E2_READ 550 * wValue: 0 551 * wIndex: Address of word to read 552 * wLength: 2 553 * Data: Will return a word of data from E2Address 554 * 555 */ 556 557 /* Port Identifier Table */ 558 #define PIT_DEFAULT 0 /* SIOA */ 559 #define PIT_SIOA 1 /* SIOA */ 560 /* The device this driver is tested with one has only one port */ 561 #define PIT_SIOB 2 /* SIOB */ 562 #define PIT_PARALLEL 3 /* Parallel */ 563 564 /* FTDI_SIO_RESET */ 565 #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET 566 #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 567 #define FTDI_SIO_RESET_SIO 0 568 #define FTDI_SIO_RESET_PURGE_RX 1 569 #define FTDI_SIO_RESET_PURGE_TX 2 570 571 /* 572 * BmRequestType: 0100 0000B 573 * bRequest: FTDI_SIO_RESET 574 * wValue: Control Value 575 * 0 = Reset SIO 576 * 1 = Purge RX buffer 577 * 2 = Purge TX buffer 578 * wIndex: Port 579 * wLength: 0 580 * Data: None 581 * 582 * The Reset SIO command has this effect: 583 * 584 * Sets flow control set to 'none' 585 * Event char = $0D 586 * Event trigger = disabled 587 * Purge RX buffer 588 * Purge TX buffer 589 * Clear DTR 590 * Clear RTS 591 * baud and data format not reset 592 * 593 * The Purge RX and TX buffer commands affect nothing except the buffers 594 * 595 */ 596 597 /* FTDI_SIO_SET_BAUDRATE */ 598 #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 599 #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 600 601 /* 602 * BmRequestType: 0100 0000B 603 * bRequest: FTDI_SIO_SET_BAUDRATE 604 * wValue: BaudDivisor value - see below 605 * wIndex: Port 606 * wLength: 0 607 * Data: None 608 * The BaudDivisor values are calculated as follows: 609 * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish 610 * I knew how to detect old chips to select proper base clock! 611 * - BaudDivisor is a fixed point number encoded in a funny way. 612 * (--WRONG WAY OF THINKING--) 613 * BaudDivisor is a fixed point number encoded with following bit weighs: 614 * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values 615 * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). 616 * (--THE REALITY--) 617 * The both-bits-set has quite different meaning from 0.75 - the chip designers 618 * have decided it to mean 0.125 instead of 0.75. 619 * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates 620 * and Flow Control Consideration for USB to RS232". 621 * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should 622 * automagically re-encode the resulting value to take fractions into consideration. 623 * As all values are integers, some bit twiddling is in order: 624 * BaudDivisor = (BaseClock / 16 / BaudRate) | 625 * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 626 * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 627 * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 628 * : 0) 629 * 630 * For the FT232BM, a 17th divisor bit was introduced to encode the multiples 631 * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows 632 * (the first four codes are the same as for the FT8U232AM, where bit 16 is 633 * always 0): 634 * 000 - add .000 to divisor 635 * 001 - add .500 to divisor 636 * 010 - add .250 to divisor 637 * 011 - add .125 to divisor 638 * 100 - add .375 to divisor 639 * 101 - add .625 to divisor 640 * 110 - add .750 to divisor 641 * 111 - add .875 to divisor 642 * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is 643 * placed in bit 0 of the urb index. 644 * 645 * Note that there are a couple of special cases to support the highest baud 646 * rates. If the calculated divisor value is 1, this needs to be replaced with 647 * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 648 * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is 649 * not supported by the FT8U232AM). 650 */ 651 652 typedef enum { 653 SIO = 1, 654 FT8U232AM = 2, 655 FT232BM = 3, 656 FT2232C = 4, 657 FT232RL = 5, 658 } ftdi_chip_type_t; 659 660 typedef enum { 661 ftdi_sio_b300 = 0, 662 ftdi_sio_b600 = 1, 663 ftdi_sio_b1200 = 2, 664 ftdi_sio_b2400 = 3, 665 ftdi_sio_b4800 = 4, 666 ftdi_sio_b9600 = 5, 667 ftdi_sio_b19200 = 6, 668 ftdi_sio_b38400 = 7, 669 ftdi_sio_b57600 = 8, 670 ftdi_sio_b115200 = 9 671 } FTDI_SIO_baudrate_t ; 672 673 /* 674 * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values 675 * are calculated internally. 676 */ 677 678 #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA 679 #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 680 #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) 681 #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) 682 #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) 683 #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) 684 #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) 685 #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) 686 #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) 687 #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) 688 #define FTDI_SIO_SET_BREAK (0x1 << 14) 689 /* FTDI_SIO_SET_DATA */ 690 691 /* 692 * BmRequestType: 0100 0000B 693 * bRequest: FTDI_SIO_SET_DATA 694 * wValue: Data characteristics (see below) 695 * wIndex: Port 696 * wLength: 0 697 * Data: No 698 * 699 * Data characteristics 700 * 701 * B0..7 Number of data bits 702 * B8..10 Parity 703 * 0 = None 704 * 1 = Odd 705 * 2 = Even 706 * 3 = Mark 707 * 4 = Space 708 * B11..13 Stop Bits 709 * 0 = 1 710 * 1 = 1.5 711 * 2 = 2 712 * B14 713 * 1 = TX ON (break) 714 * 0 = TX OFF (normal state) 715 * B15 Reserved 716 * 717 */ 718 719 720 721 /* FTDI_SIO_MODEM_CTRL */ 722 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 723 #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL 724 725 /* 726 * BmRequestType: 0100 0000B 727 * bRequest: FTDI_SIO_MODEM_CTRL 728 * wValue: ControlValue (see below) 729 * wIndex: Port 730 * wLength: 0 731 * Data: None 732 * 733 * NOTE: If the device is in RTS/CTS flow control, the RTS set by this 734 * command will be IGNORED without an error being returned 735 * Also - you can not set DTR and RTS with one control message 736 */ 737 738 #define FTDI_SIO_SET_DTR_MASK 0x1 739 #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) 740 #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) 741 #define FTDI_SIO_SET_RTS_MASK 0x2 742 #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 743 #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) 744 745 /* 746 * ControlValue 747 * B0 DTR state 748 * 0 = reset 749 * 1 = set 750 * B1 RTS state 751 * 0 = reset 752 * 1 = set 753 * B2..7 Reserved 754 * B8 DTR state enable 755 * 0 = ignore 756 * 1 = use DTR state 757 * B9 RTS state enable 758 * 0 = ignore 759 * 1 = use RTS state 760 * B10..15 Reserved 761 */ 762 763 /* FTDI_SIO_SET_FLOW_CTRL */ 764 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 765 #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL 766 #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 767 #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) 768 #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) 769 #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) 770 /* 771 * BmRequestType: 0100 0000b 772 * bRequest: FTDI_SIO_SET_FLOW_CTRL 773 * wValue: Xoff/Xon 774 * wIndex: Protocol/Port - hIndex is protocl / lIndex is port 775 * wLength: 0 776 * Data: None 777 * 778 * hIndex protocol is: 779 * B0 Output handshaking using RTS/CTS 780 * 0 = disabled 781 * 1 = enabled 782 * B1 Output handshaking using DTR/DSR 783 * 0 = disabled 784 * 1 = enabled 785 * B2 Xon/Xoff handshaking 786 * 0 = disabled 787 * 1 = enabled 788 * 789 * A value of zero in the hIndex field disables handshaking 790 * 791 * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character 792 * and the lValue field contains the XON character. 793 */ 794 795 /* 796 * FTDI_SIO_GET_LATENCY_TIMER 797 * 798 * Set the timeout interval. The FTDI collects data from the slave 799 * device, transmitting it to the host when either A) 62 bytes are 800 * received, or B) the timeout interval has elapsed and the buffer 801 * contains at least 1 byte. Setting this value to a small number 802 * can dramatically improve performance for applications which send 803 * small packets, since the default value is 16ms. 804 */ 805 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER 806 #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 807 808 /* 809 * BmRequestType: 1100 0000b 810 * bRequest: FTDI_SIO_GET_LATENCY_TIMER 811 * wValue: 0 812 * wIndex: Port 813 * wLength: 0 814 * Data: latency (on return) 815 */ 816 817 /* 818 * FTDI_SIO_SET_LATENCY_TIMER 819 * 820 * Set the timeout interval. The FTDI collects data from the slave 821 * device, transmitting it to the host when either A) 62 bytes are 822 * received, or B) the timeout interval has elapsed and the buffer 823 * contains at least 1 byte. Setting this value to a small number 824 * can dramatically improve performance for applications which send 825 * small packets, since the default value is 16ms. 826 */ 827 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER 828 #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 829 830 /* 831 * BmRequestType: 0100 0000b 832 * bRequest: FTDI_SIO_SET_LATENCY_TIMER 833 * wValue: Latency (milliseconds) 834 * wIndex: Port 835 * wLength: 0 836 * Data: None 837 * 838 * wValue: 839 * B0..7 Latency timer 840 * B8..15 0 841 * 842 */ 843 844 /* 845 * FTDI_SIO_SET_EVENT_CHAR 846 * 847 * Set the special event character for the specified communications port. 848 * If the device sees this character it will immediately return the 849 * data read so far - rather than wait 40ms or until 62 bytes are read 850 * which is what normally happens. 851 */ 852 853 854 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR 855 #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 856 857 858 /* 859 * BmRequestType: 0100 0000b 860 * bRequest: FTDI_SIO_SET_EVENT_CHAR 861 * wValue: EventChar 862 * wIndex: Port 863 * wLength: 0 864 * Data: None 865 * 866 * wValue: 867 * B0..7 Event Character 868 * B8 Event Character Processing 869 * 0 = disabled 870 * 1 = enabled 871 * B9..15 Reserved 872 * 873 */ 874 875 /* FTDI_SIO_SET_ERROR_CHAR */ 876 877 /* Set the parity error replacement character for the specified communications port */ 878 879 /* 880 * BmRequestType: 0100 0000b 881 * bRequest: FTDI_SIO_SET_EVENT_CHAR 882 * wValue: Error Char 883 * wIndex: Port 884 * wLength: 0 885 * Data: None 886 * 887 *Error Char 888 * B0..7 Error Character 889 * B8 Error Character Processing 890 * 0 = disabled 891 * 1 = enabled 892 * B9..15 Reserved 893 * 894 */ 895 896 /* FTDI_SIO_GET_MODEM_STATUS */ 897 /* Retrieve the current value of the modem status register */ 898 899 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 900 #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS 901 #define FTDI_SIO_CTS_MASK 0x10 902 #define FTDI_SIO_DSR_MASK 0x20 903 #define FTDI_SIO_RI_MASK 0x40 904 #define FTDI_SIO_RLSD_MASK 0x80 905 /* 906 * BmRequestType: 1100 0000b 907 * bRequest: FTDI_SIO_GET_MODEM_STATUS 908 * wValue: zero 909 * wIndex: Port 910 * wLength: 1 911 * Data: Status 912 * 913 * One byte of data is returned 914 * B0..3 0 915 * B4 CTS 916 * 0 = inactive 917 * 1 = active 918 * B5 DSR 919 * 0 = inactive 920 * 1 = active 921 * B6 Ring Indicator (RI) 922 * 0 = inactive 923 * 1 = active 924 * B7 Receive Line Signal Detect (RLSD) 925 * 0 = inactive 926 * 1 = active 927 */ 928 929 930 931 /* Descriptors returned by the device 932 * 933 * Device Descriptor 934 * 935 * Offset Field Size Value Description 936 * 0 bLength 1 0x12 Size of descriptor in bytes 937 * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type 938 * 2 bcdUSB 2 0x0110 USB Spec Release Number 939 * 4 bDeviceClass 1 0x00 Class Code 940 * 5 bDeviceSubClass 1 0x00 SubClass Code 941 * 6 bDeviceProtocol 1 0x00 Protocol Code 942 * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 943 * 8 idVendor 2 0x0403 Vendor ID 944 * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) 945 * 12 bcdDevice 2 0x0001 Device release number 946 * 14 iManufacturer 1 0x01 Index of man. string desc 947 * 15 iProduct 1 0x02 Index of prod string desc 948 * 16 iSerialNumber 1 0x02 Index of serial nmr string desc 949 * 17 bNumConfigurations 1 0x01 Number of possible configurations 950 * 951 * Configuration Descriptor 952 * 953 * Offset Field Size Value 954 * 0 bLength 1 0x09 Size of descriptor in bytes 955 * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type 956 * 2 wTotalLength 2 0x0020 Total length of data 957 * 4 bNumInterfaces 1 0x01 Number of interfaces supported 958 * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req 959 * 6 iConfiguration 1 0x02 Index of config string descriptor 960 * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup 961 * 8 MaxPower 1 0x1E Max power consumption 962 * 963 * Interface Descriptor 964 * 965 * Offset Field Size Value 966 * 0 bLength 1 0x09 Size of descriptor in bytes 967 * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type 968 * 2 bInterfaceNumber 1 0x00 Number of interface 969 * 3 bAlternateSetting 1 0x00 Value used to select alternate 970 * 4 bNumEndpoints 1 0x02 Number of endpoints 971 * 5 bInterfaceClass 1 0xFF Class Code 972 * 6 bInterfaceSubClass 1 0xFF Subclass Code 973 * 7 bInterfaceProtocol 1 0xFF Protocol Code 974 * 8 iInterface 1 0x02 Index of interface string description 975 * 976 * IN Endpoint Descriptor 977 * 978 * Offset Field Size Value 979 * 0 bLength 1 0x07 Size of descriptor in bytes 980 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 981 * 2 bEndpointAddress 1 0x82 Address of endpoint 982 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 983 * 4 bNumEndpoints 2 0x0040 maximum packet size 984 * 5 bInterval 1 0x00 Interval for polling endpoint 985 * 986 * OUT Endpoint Descriptor 987 * 988 * Offset Field Size Value 989 * 0 bLength 1 0x07 Size of descriptor in bytes 990 * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type 991 * 2 bEndpointAddress 1 0x02 Address of endpoint 992 * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk 993 * 4 bNumEndpoints 2 0x0040 maximum packet size 994 * 5 bInterval 1 0x00 Interval for polling endpoint 995 * 996 * DATA FORMAT 997 * 998 * IN Endpoint 999 * 1000 * The device reserves the first two bytes of data on this endpoint to contain the current 1001 * values of the modem and line status registers. In the absence of data, the device 1002 * generates a message consisting of these two status bytes every 40 ms 1003 * 1004 * Byte 0: Modem Status 1005 * 1006 * Offset Description 1007 * B0 Reserved - must be 1 1008 * B1 Reserved - must be 0 1009 * B2 Reserved - must be 0 1010 * B3 Reserved - must be 0 1011 * B4 Clear to Send (CTS) 1012 * B5 Data Set Ready (DSR) 1013 * B6 Ring Indicator (RI) 1014 * B7 Receive Line Signal Detect (RLSD) 1015 * 1016 * Byte 1: Line Status 1017 * 1018 * Offset Description 1019 * B0 Data Ready (DR) 1020 * B1 Overrun Error (OE) 1021 * B2 Parity Error (PE) 1022 * B3 Framing Error (FE) 1023 * B4 Break Interrupt (BI) 1024 * B5 Transmitter Holding Register (THRE) 1025 * B6 Transmitter Empty (TEMT) 1026 * B7 Error in RCVR FIFO 1027 * 1028 */ 1029 #define FTDI_RS0_CTS (1 << 4) 1030 #define FTDI_RS0_DSR (1 << 5) 1031 #define FTDI_RS0_RI (1 << 6) 1032 #define FTDI_RS0_RLSD (1 << 7) 1033 1034 #define FTDI_RS_DR 1 1035 #define FTDI_RS_OE (1<<1) 1036 #define FTDI_RS_PE (1<<2) 1037 #define FTDI_RS_FE (1<<3) 1038 #define FTDI_RS_BI (1<<4) 1039 #define FTDI_RS_THRE (1<<5) 1040 #define FTDI_RS_TEMT (1<<6) 1041 #define FTDI_RS_FIFO (1<<7) 1042 1043 /* 1044 * OUT Endpoint 1045 * 1046 * This device reserves the first bytes of data on this endpoint contain the length 1047 * and port identifier of the message. For the FTDI USB Serial converter the port 1048 * identifier is always 1. 1049 * 1050 * Byte 0: Line Status 1051 * 1052 * Offset Description 1053 * B0 Reserved - must be 1 1054 * B1 Reserved - must be 0 1055 * B2..7 Length of message - (not including Byte 0) 1056 * 1057 */ 1058 1059