1 /* 2 * USB FTDI SIO driver 3 * 4 * Copyright (C) 2009 - 2010 5 * Johan Hovold (jhovold@gmail.com) 6 * Copyright (C) 1999 - 2001 7 * Greg Kroah-Hartman (greg@kroah.com) 8 * Bill Ryder (bryder@sgi.com) 9 * Copyright (C) 2002 10 * Kuba Ober (kuba@mareimbrium.org) 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2 of the License, or 15 * (at your option) any later version. 16 * 17 * See Documentation/usb/usb-serial.txt for more information on using this 18 * driver 19 * 20 * See http://ftdi-usb-sio.sourceforge.net for up to date testing info 21 * and extra documentation 22 * 23 * Change entries from 2004 and earlier can be found in versions of this 24 * file in kernel versions prior to the 2.6.24 release. 25 * 26 */ 27 28 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ 29 /* Thanx to FTDI for so kindly providing details of the protocol required */ 30 /* to talk to the device */ 31 /* Thanx to gkh and the rest of the usb dev group for all code I have 32 assimilated :-) */ 33 34 #include <linux/kernel.h> 35 #include <linux/errno.h> 36 #include <linux/init.h> 37 #include <linux/slab.h> 38 #include <linux/tty.h> 39 #include <linux/tty_driver.h> 40 #include <linux/tty_flip.h> 41 #include <linux/module.h> 42 #include <linux/spinlock.h> 43 #include <linux/mutex.h> 44 #include <linux/uaccess.h> 45 #include <linux/usb.h> 46 #include <linux/serial.h> 47 #include <linux/usb/serial.h> 48 #include "ftdi_sio.h" 49 #include "ftdi_sio_ids.h" 50 51 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" 52 #define DRIVER_DESC "USB FTDI Serial Converters Driver" 53 54 static __u16 vendor = FTDI_VID; 55 static __u16 product; 56 57 struct ftdi_private { 58 struct kref kref; 59 enum ftdi_chip_type chip_type; 60 /* type of device, either SIO or FT8U232AM */ 61 int baud_base; /* baud base clock for divisor setting */ 62 int custom_divisor; /* custom_divisor kludge, this is for 63 baud_base (different from what goes to the 64 chip!) */ 65 __u16 last_set_data_urb_value ; 66 /* the last data state set - needed for doing 67 * a break 68 */ 69 int flags; /* some ASYNC_xxxx flags are supported */ 70 unsigned long last_dtr_rts; /* saved modem control outputs */ 71 struct async_icount icount; 72 wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ 73 char prev_status; /* Used for TIOCMIWAIT */ 74 bool dev_gone; /* Used to abort TIOCMIWAIT */ 75 char transmit_empty; /* If transmitter is empty or not */ 76 __u16 interface; /* FT2232C, FT2232H or FT4232H port interface 77 (0 for FT232/245) */ 78 79 speed_t force_baud; /* if non-zero, force the baud rate to 80 this value */ 81 int force_rtscts; /* if non-zero, force RTS-CTS to always 82 be enabled */ 83 84 unsigned int latency; /* latency setting in use */ 85 unsigned short max_packet_size; 86 struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */ 87 }; 88 89 /* struct ftdi_sio_quirk is used by devices requiring special attention. */ 90 struct ftdi_sio_quirk { 91 int (*probe)(struct usb_serial *); 92 /* Special settings for probed ports. */ 93 void (*port_probe)(struct ftdi_private *); 94 }; 95 96 static int ftdi_jtag_probe(struct usb_serial *serial); 97 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial); 98 static int ftdi_NDI_device_setup(struct usb_serial *serial); 99 static int ftdi_stmclite_probe(struct usb_serial *serial); 100 static int ftdi_8u2232c_probe(struct usb_serial *serial); 101 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); 102 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); 103 104 static struct ftdi_sio_quirk ftdi_jtag_quirk = { 105 .probe = ftdi_jtag_probe, 106 }; 107 108 static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = { 109 .probe = ftdi_mtxorb_hack_setup, 110 }; 111 112 static struct ftdi_sio_quirk ftdi_NDI_device_quirk = { 113 .probe = ftdi_NDI_device_setup, 114 }; 115 116 static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { 117 .port_probe = ftdi_USB_UIRT_setup, 118 }; 119 120 static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { 121 .port_probe = ftdi_HE_TIRA1_setup, 122 }; 123 124 static struct ftdi_sio_quirk ftdi_stmclite_quirk = { 125 .probe = ftdi_stmclite_probe, 126 }; 127 128 static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { 129 .probe = ftdi_8u2232c_probe, 130 }; 131 132 /* 133 * The 8U232AM has the same API as the sio except for: 134 * - it can support MUCH higher baudrates; up to: 135 * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz 136 * o 230400 at 12MHz 137 * so .. 8U232AM's baudrate setting codes are different 138 * - it has a two byte status code. 139 * - it returns characters every 16ms (the FTDI does it every 40ms) 140 * 141 * the bcdDevice value is used to differentiate FT232BM and FT245BM from 142 * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID 143 * combinations in both tables. 144 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices, 145 * but I don't know if those ever went into mass production. [Ian Abbott] 146 */ 147 148 149 150 /* 151 * Device ID not listed? Test via module params product/vendor or 152 * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! 153 */ 154 static struct usb_device_id id_table_combined [] = { 155 { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) }, 156 { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) }, 157 { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) }, 158 { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, 159 { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, 160 { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, 161 { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, 162 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, 163 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, 164 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, 165 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) }, 166 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) }, 167 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) }, 168 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) }, 169 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) }, 170 { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) }, 171 { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) }, 172 { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) }, 173 { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, 174 { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, 175 { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, 176 { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) }, 177 { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) }, 178 { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, 179 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, 180 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, 181 { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, 182 { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , 183 .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, 184 { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, 185 { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, 186 { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) }, 187 { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, 188 { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, 189 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, 190 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) }, 191 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, 192 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, 193 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, 194 { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, 195 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, 196 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, 197 { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, 198 { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) }, 199 { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, 200 { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, 201 { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, 202 { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) }, 203 { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) }, 204 { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) }, 205 { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, 206 { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, 207 { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, 208 { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) }, 209 { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) }, 210 { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, 211 { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, 212 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, 213 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) }, 214 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) }, 215 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) }, 216 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, 217 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, 218 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, 219 { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, 220 { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) }, 221 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, 222 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, 223 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, 224 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) }, 225 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) }, 226 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) }, 227 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) }, 228 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) }, 229 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) }, 230 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) }, 231 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) }, 232 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) }, 233 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) }, 234 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) }, 235 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) }, 236 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) }, 237 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) }, 238 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) }, 239 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) }, 240 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) }, 241 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) }, 242 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) }, 243 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) }, 244 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) }, 245 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) }, 246 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) }, 247 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) }, 248 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) }, 249 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) }, 250 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) }, 251 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) }, 252 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) }, 253 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) }, 254 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) }, 255 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) }, 256 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) }, 257 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) }, 258 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) }, 259 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) }, 260 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID), 261 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 262 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) }, 263 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) }, 264 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) }, 265 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) }, 266 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID), 267 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 268 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) }, 269 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) }, 270 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) }, 271 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) }, 272 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) }, 273 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) }, 274 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) }, 275 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) }, 276 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) }, 277 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) }, 278 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) }, 279 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) }, 280 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) }, 281 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) }, 282 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) }, 283 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) }, 284 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) }, 285 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) }, 286 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) }, 287 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) }, 288 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) }, 289 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) }, 290 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) }, 291 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) }, 292 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) }, 293 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) }, 294 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) }, 295 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) }, 296 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) }, 297 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) }, 298 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) }, 299 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) }, 300 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) }, 301 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) }, 302 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) }, 303 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) }, 304 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) }, 305 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) }, 306 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID), 307 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 308 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID), 309 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 310 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID), 311 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 312 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID), 313 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 314 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID), 315 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 316 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID), 317 .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, 318 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) }, 319 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) }, 320 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) }, 321 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) }, 322 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) }, 323 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) }, 324 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) }, 325 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) }, 326 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) }, 327 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) }, 328 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) }, 329 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) }, 330 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) }, 331 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) }, 332 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) }, 333 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) }, 334 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) }, 335 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) }, 336 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) }, 337 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) }, 338 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) }, 339 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) }, 340 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) }, 341 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) }, 342 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) }, 343 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) }, 344 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) }, 345 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) }, 346 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) }, 347 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) }, 348 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) }, 349 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) }, 350 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) }, 351 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) }, 352 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) }, 353 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) }, 354 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) }, 355 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) }, 356 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) }, 357 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) }, 358 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) }, 359 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) }, 360 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) }, 361 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) }, 362 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) }, 363 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) }, 364 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) }, 365 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) }, 366 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) }, 367 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) }, 368 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) }, 369 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) }, 370 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) }, 371 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) }, 372 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) }, 373 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) }, 374 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) }, 375 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) }, 376 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) }, 377 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) }, 378 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) }, 379 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) }, 380 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) }, 381 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) }, 382 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) }, 383 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) }, 384 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) }, 385 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) }, 386 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) }, 387 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) }, 388 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) }, 389 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) }, 390 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) }, 391 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) }, 392 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) }, 393 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) }, 394 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) }, 395 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) }, 396 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) }, 397 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) }, 398 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) }, 399 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) }, 400 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) }, 401 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) }, 402 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) }, 403 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) }, 404 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) }, 405 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) }, 406 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) }, 407 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) }, 408 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) }, 409 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) }, 410 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) }, 411 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) }, 412 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) }, 413 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) }, 414 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) }, 415 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) }, 416 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) }, 417 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) }, 418 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) }, 419 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) }, 420 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) }, 421 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) }, 422 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) }, 423 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) }, 424 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) }, 425 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) }, 426 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) }, 427 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) }, 428 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) }, 429 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) }, 430 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) }, 431 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) }, 432 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) }, 433 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) }, 434 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) }, 435 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) }, 436 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) }, 437 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) }, 438 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) }, 439 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) }, 440 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) }, 441 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) }, 442 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) }, 443 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) }, 444 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) }, 445 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) }, 446 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) }, 447 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) }, 448 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) }, 449 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) }, 450 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) }, 451 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) }, 452 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) }, 453 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) }, 454 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) }, 455 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) }, 456 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) }, 457 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) }, 458 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) }, 459 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) }, 460 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) }, 461 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) }, 462 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) }, 463 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) }, 464 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) }, 465 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) }, 466 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) }, 467 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) }, 468 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) }, 469 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) }, 470 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) }, 471 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) }, 472 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) }, 473 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) }, 474 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) }, 475 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) }, 476 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) }, 477 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) }, 478 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) }, 479 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) }, 480 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) }, 481 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) }, 482 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, 483 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, 484 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, 485 { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, 486 { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, 487 { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, 488 { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) }, 489 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, 490 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, 491 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, 492 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) }, 493 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) }, 494 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) }, 495 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) }, 496 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) }, 497 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) }, 498 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) }, 499 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) }, 500 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) }, 501 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) }, 502 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) }, 503 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) }, 504 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) }, 505 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) }, 506 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) }, 507 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) }, 508 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) }, 509 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) }, 510 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) }, 511 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) }, 512 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) }, 513 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) }, 514 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) }, 515 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) }, 516 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) }, 517 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) }, 518 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) }, 519 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) }, 520 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) }, 521 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) }, 522 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) }, 523 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) }, 524 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) }, 525 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) }, 526 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) }, 527 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) }, 528 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) }, 529 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) }, 530 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) }, 531 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) }, 532 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) }, 533 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) }, 534 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) }, 535 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, 536 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) }, 537 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) }, 538 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) }, 539 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) }, 540 { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, 541 { USB_DEVICE(OCT_VID, OCT_US101_PID) }, 542 { USB_DEVICE(OCT_VID, OCT_DK201_PID) }, 543 { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID), 544 .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk }, 545 { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID), 546 .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk }, 547 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) }, 548 { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, 549 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, 550 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, 551 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) }, 552 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) }, 553 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) }, 554 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) }, 555 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) }, 556 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) }, 557 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) }, 558 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) }, 559 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) }, 560 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) }, 561 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) }, 562 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) }, 563 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) }, 564 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) }, 565 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) }, 566 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) }, 567 { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, 568 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, 569 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, 570 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, 571 { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, 572 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, 573 { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) }, 574 { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) }, 575 { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) }, 576 { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) }, 577 { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) }, 578 { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) }, 579 { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, 580 { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, 581 { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, 582 { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), 583 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 584 /* 585 * ELV devices: 586 */ 587 { USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) }, 588 { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, 589 { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, 590 { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, 591 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, 592 { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, 593 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, 594 { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, 595 { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, 596 { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, 597 { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, 598 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, 599 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, 600 { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, 601 { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, 602 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, 603 { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, 604 { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, 605 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, 606 { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, 607 { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, 608 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, 609 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, 610 { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, 611 { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, 612 { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, 613 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, 614 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, 615 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, 616 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, 617 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, 618 { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, 619 { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, 620 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, 621 { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, 622 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, 623 { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, 624 { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, 625 { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, 626 { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, 627 { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, 628 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, 629 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, 630 { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, 631 { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) }, 632 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) }, 633 { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) }, 634 { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, 635 { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, 636 { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, 637 { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, 638 { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) }, 639 { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, 640 { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, 641 { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, 642 { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, 643 { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, 644 { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, 645 { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, 646 { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, 647 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, 648 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) }, 649 { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) }, 650 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) }, 651 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) }, 652 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) }, 653 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) }, 654 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) }, 655 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) }, 656 { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) }, 657 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) }, 658 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) }, 659 { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) }, 660 { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) }, 661 { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) }, 662 { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, 663 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, 664 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, 665 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, 666 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, 667 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, 668 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, 669 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) }, 670 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) }, 671 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) }, 672 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) }, 673 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, 674 { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, 675 { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, 676 { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, 677 { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, 678 { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) }, 679 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, 680 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, 681 { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) }, 682 { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) }, 683 { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) }, 684 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) }, 685 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, 686 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, 687 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, 688 { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, 689 { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, 690 { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, 691 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, 692 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, 693 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, 694 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) }, 695 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) }, 696 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, 697 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, 698 { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) }, 699 { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) }, 700 { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) }, 701 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) }, 702 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) }, 703 { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, 704 { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, 705 { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, 706 { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, 707 { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, 708 { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, 709 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, 710 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, 711 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, 712 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, 713 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, 714 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, 715 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, 716 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, 717 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, 718 { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, 719 { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, 720 { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, 721 { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, 722 { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, 723 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, 724 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, 725 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, 726 { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, 727 { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID), 728 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 729 { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID), 730 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 731 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID), 732 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 733 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID), 734 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 735 { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), 736 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 737 { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, 738 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, 739 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) }, 740 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) }, 741 { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, 742 { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, 743 { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, 744 { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, 745 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, 746 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, 747 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), 748 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 749 { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), 750 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 751 { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), 752 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 753 { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), 754 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 755 { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID), 756 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 757 { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), 758 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 759 { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), 760 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 761 { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), 762 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 763 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, 764 { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, 765 766 /* Papouch devices based on FTDI chip */ 767 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) }, 768 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) }, 769 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) }, 770 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) }, 771 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) }, 772 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) }, 773 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) }, 774 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) }, 775 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) }, 776 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) }, 777 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, 778 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) }, 779 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) }, 780 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) }, 781 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, 782 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) }, 783 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) }, 784 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) }, 785 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) }, 786 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) }, 787 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) }, 788 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) }, 789 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) }, 790 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) }, 791 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) }, 792 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, 793 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) }, 794 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) }, 795 796 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, 797 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, 798 { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, 799 { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, 800 { USB_DEVICE(ATMEL_VID, STK541_PID) }, 801 { USB_DEVICE(DE_VID, STB_PID) }, 802 { USB_DEVICE(DE_VID, WHT_PID) }, 803 { USB_DEVICE(ADI_VID, ADI_GNICE_PID), 804 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 805 { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), 806 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 807 { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, 808 USB_CLASS_VENDOR_SPEC, 809 USB_SUBCLASS_VENDOR_SPEC, 0x00) }, 810 { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, 811 { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), 812 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 813 { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, 814 { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, 815 { USB_DEVICE(FTDI_VID, PI_C865_PID) }, 816 { USB_DEVICE(FTDI_VID, PI_C857_PID) }, 817 { USB_DEVICE(PI_VID, PI_C866_PID) }, 818 { USB_DEVICE(PI_VID, PI_C663_PID) }, 819 { USB_DEVICE(PI_VID, PI_C725_PID) }, 820 { USB_DEVICE(PI_VID, PI_E517_PID) }, 821 { USB_DEVICE(PI_VID, PI_C863_PID) }, 822 { USB_DEVICE(PI_VID, PI_E861_PID) }, 823 { USB_DEVICE(PI_VID, PI_C867_PID) }, 824 { USB_DEVICE(PI_VID, PI_E609_PID) }, 825 { USB_DEVICE(PI_VID, PI_E709_PID) }, 826 { USB_DEVICE(PI_VID, PI_100F_PID) }, 827 { USB_DEVICE(PI_VID, PI_1011_PID) }, 828 { USB_DEVICE(PI_VID, PI_1012_PID) }, 829 { USB_DEVICE(PI_VID, PI_1013_PID) }, 830 { USB_DEVICE(PI_VID, PI_1014_PID) }, 831 { USB_DEVICE(PI_VID, PI_1015_PID) }, 832 { USB_DEVICE(PI_VID, PI_1016_PID) }, 833 { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, 834 { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, 835 { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), 836 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 837 { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), 838 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 839 { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, 840 { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, 841 { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, 842 { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, 843 { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, 844 { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, 845 { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, 846 { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, 847 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), 848 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 849 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), 850 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 851 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), 852 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 853 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), 854 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 855 { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, 856 { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) }, 857 { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID), 858 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 859 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) }, 860 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) }, 861 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) }, 862 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) }, 863 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) }, 864 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) }, 865 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) }, 866 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) }, 867 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, 868 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, 869 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, 870 { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, 871 { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, 872 { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), 873 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 874 { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), 875 .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, 876 { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, 877 { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), 878 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 879 { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, 880 /* Crucible Devices */ 881 { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, 882 { }, /* Optional parameter entry */ 883 { } /* Terminating entry */ 884 }; 885 886 MODULE_DEVICE_TABLE(usb, id_table_combined); 887 888 static const char *ftdi_chip_name[] = { 889 [SIO] = "SIO", /* the serial part of FT8U100AX */ 890 [FT8U232AM] = "FT8U232AM", 891 [FT232BM] = "FT232BM", 892 [FT2232C] = "FT2232C", 893 [FT232RL] = "FT232RL", 894 [FT2232H] = "FT2232H", 895 [FT4232H] = "FT4232H", 896 [FT232H] = "FT232H", 897 [FTX] = "FT-X" 898 }; 899 900 901 /* Used for TIOCMIWAIT */ 902 #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) 903 #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) 904 /* End TIOCMIWAIT */ 905 906 #define FTDI_IMPL_ASYNC_FLAGS = (ASYNC_SPD_HI | ASYNC_SPD_VHI \ 907 | ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP) 908 909 /* function prototypes for a FTDI serial converter */ 910 static int ftdi_sio_probe(struct usb_serial *serial, 911 const struct usb_device_id *id); 912 static int ftdi_sio_port_probe(struct usb_serial_port *port); 913 static int ftdi_sio_port_remove(struct usb_serial_port *port); 914 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); 915 static void ftdi_close(struct usb_serial_port *port); 916 static void ftdi_dtr_rts(struct usb_serial_port *port, int on); 917 static void ftdi_process_read_urb(struct urb *urb); 918 static int ftdi_prepare_write_buffer(struct usb_serial_port *port, 919 void *dest, size_t size); 920 static void ftdi_set_termios(struct tty_struct *tty, 921 struct usb_serial_port *port, struct ktermios *old); 922 static int ftdi_tiocmget(struct tty_struct *tty); 923 static int ftdi_tiocmset(struct tty_struct *tty, 924 unsigned int set, unsigned int clear); 925 static int ftdi_get_icount(struct tty_struct *tty, 926 struct serial_icounter_struct *icount); 927 static int ftdi_ioctl(struct tty_struct *tty, 928 unsigned int cmd, unsigned long arg); 929 static void ftdi_break_ctl(struct tty_struct *tty, int break_state); 930 static int ftdi_chars_in_buffer(struct tty_struct *tty); 931 static int ftdi_get_modem_status(struct tty_struct *tty, 932 unsigned char status[2]); 933 934 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); 935 static unsigned short int ftdi_232am_baud_to_divisor(int baud); 936 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); 937 static __u32 ftdi_232bm_baud_to_divisor(int baud); 938 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); 939 static __u32 ftdi_2232h_baud_to_divisor(int baud); 940 941 static struct usb_serial_driver ftdi_sio_device = { 942 .driver = { 943 .owner = THIS_MODULE, 944 .name = "ftdi_sio", 945 }, 946 .description = "FTDI USB Serial Device", 947 .id_table = id_table_combined, 948 .num_ports = 1, 949 .bulk_in_size = 512, 950 .bulk_out_size = 256, 951 .probe = ftdi_sio_probe, 952 .port_probe = ftdi_sio_port_probe, 953 .port_remove = ftdi_sio_port_remove, 954 .open = ftdi_open, 955 .close = ftdi_close, 956 .dtr_rts = ftdi_dtr_rts, 957 .throttle = usb_serial_generic_throttle, 958 .unthrottle = usb_serial_generic_unthrottle, 959 .process_read_urb = ftdi_process_read_urb, 960 .prepare_write_buffer = ftdi_prepare_write_buffer, 961 .tiocmget = ftdi_tiocmget, 962 .tiocmset = ftdi_tiocmset, 963 .get_icount = ftdi_get_icount, 964 .ioctl = ftdi_ioctl, 965 .set_termios = ftdi_set_termios, 966 .break_ctl = ftdi_break_ctl, 967 .chars_in_buffer = ftdi_chars_in_buffer, 968 }; 969 970 static struct usb_serial_driver * const serial_drivers[] = { 971 &ftdi_sio_device, NULL 972 }; 973 974 975 #define WDR_TIMEOUT 5000 /* default urb timeout */ 976 #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ 977 978 /* High and low are for DTR, RTS etc etc */ 979 #define HIGH 1 980 #define LOW 0 981 982 /* 983 * *************************************************************************** 984 * Utility functions 985 * *************************************************************************** 986 */ 987 988 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) 989 { 990 unsigned short int divisor; 991 /* divisor shifted 3 bits to the left */ 992 int divisor3 = base / 2 / baud; 993 if ((divisor3 & 0x7) == 7) 994 divisor3++; /* round x.7/8 up to x+1 */ 995 divisor = divisor3 >> 3; 996 divisor3 &= 0x7; 997 if (divisor3 == 1) 998 divisor |= 0xc000; 999 else if (divisor3 >= 4) 1000 divisor |= 0x4000; 1001 else if (divisor3 != 0) 1002 divisor |= 0x8000; 1003 else if (divisor == 1) 1004 divisor = 0; /* special case for maximum baud rate */ 1005 return divisor; 1006 } 1007 1008 static unsigned short int ftdi_232am_baud_to_divisor(int baud) 1009 { 1010 return ftdi_232am_baud_base_to_divisor(baud, 48000000); 1011 } 1012 1013 static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) 1014 { 1015 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; 1016 __u32 divisor; 1017 /* divisor shifted 3 bits to the left */ 1018 int divisor3 = base / 2 / baud; 1019 divisor = divisor3 >> 3; 1020 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; 1021 /* Deal with special cases for highest baud rates. */ 1022 if (divisor == 1) 1023 divisor = 0; 1024 else if (divisor == 0x4001) 1025 divisor = 1; 1026 return divisor; 1027 } 1028 1029 static __u32 ftdi_232bm_baud_to_divisor(int baud) 1030 { 1031 return ftdi_232bm_baud_base_to_divisor(baud, 48000000); 1032 } 1033 1034 static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) 1035 { 1036 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; 1037 __u32 divisor; 1038 int divisor3; 1039 1040 /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ 1041 divisor3 = base * 8 / (baud * 10); 1042 1043 divisor = divisor3 >> 3; 1044 divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; 1045 /* Deal with special cases for highest baud rates. */ 1046 if (divisor == 1) 1047 divisor = 0; 1048 else if (divisor == 0x4001) 1049 divisor = 1; 1050 /* 1051 * Set this bit to turn off a divide by 2.5 on baud rate generator 1052 * This enables baud rates up to 12Mbaud but cannot reach below 1200 1053 * baud with this bit set 1054 */ 1055 divisor |= 0x00020000; 1056 return divisor; 1057 } 1058 1059 static __u32 ftdi_2232h_baud_to_divisor(int baud) 1060 { 1061 return ftdi_2232h_baud_base_to_divisor(baud, 120000000); 1062 } 1063 1064 #define set_mctrl(port, set) update_mctrl((port), (set), 0) 1065 #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear)) 1066 1067 static int update_mctrl(struct usb_serial_port *port, unsigned int set, 1068 unsigned int clear) 1069 { 1070 struct ftdi_private *priv = usb_get_serial_port_data(port); 1071 struct device *dev = &port->dev; 1072 unsigned urb_value; 1073 int rv; 1074 1075 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { 1076 dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__); 1077 return 0; /* no change */ 1078 } 1079 1080 clear &= ~set; /* 'set' takes precedence over 'clear' */ 1081 urb_value = 0; 1082 if (clear & TIOCM_DTR) 1083 urb_value |= FTDI_SIO_SET_DTR_LOW; 1084 if (clear & TIOCM_RTS) 1085 urb_value |= FTDI_SIO_SET_RTS_LOW; 1086 if (set & TIOCM_DTR) 1087 urb_value |= FTDI_SIO_SET_DTR_HIGH; 1088 if (set & TIOCM_RTS) 1089 urb_value |= FTDI_SIO_SET_RTS_HIGH; 1090 rv = usb_control_msg(port->serial->dev, 1091 usb_sndctrlpipe(port->serial->dev, 0), 1092 FTDI_SIO_SET_MODEM_CTRL_REQUEST, 1093 FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, 1094 urb_value, priv->interface, 1095 NULL, 0, WDR_TIMEOUT); 1096 if (rv < 0) { 1097 dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", 1098 __func__, 1099 (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", 1100 (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); 1101 rv = usb_translate_errors(rv); 1102 } else { 1103 dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, 1104 (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", 1105 (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); 1106 /* FIXME: locking on last_dtr_rts */ 1107 priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set; 1108 } 1109 return rv; 1110 } 1111 1112 1113 static __u32 get_ftdi_divisor(struct tty_struct *tty, 1114 struct usb_serial_port *port) 1115 { 1116 struct ftdi_private *priv = usb_get_serial_port_data(port); 1117 struct device *dev = &port->dev; 1118 __u32 div_value = 0; 1119 int div_okay = 1; 1120 int baud; 1121 1122 /* 1123 * The logic involved in setting the baudrate can be cleanly split into 1124 * 3 steps. 1125 * 1. Standard baud rates are set in tty->termios->c_cflag 1126 * 2. If these are not enough, you can set any speed using alt_speed as 1127 * follows: 1128 * - set tty->termios->c_cflag speed to B38400 1129 * - set your real speed in tty->alt_speed; it gets ignored when 1130 * alt_speed==0, (or) 1131 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as 1132 * follows: 1133 * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], 1134 * this just sets alt_speed to (HI: 57600, VHI: 115200, 1135 * SHI: 230400, WARP: 460800) 1136 * ** Steps 1, 2 are done courtesy of tty_get_baud_rate 1137 * 3. You can also set baud rate by setting custom divisor as follows 1138 * - set tty->termios->c_cflag speed to B38400 1139 * - call TIOCSSERIAL ioctl with (struct serial_struct) set as 1140 * follows: 1141 * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST 1142 * o custom_divisor set to baud_base / your_new_baudrate 1143 * ** Step 3 is done courtesy of code borrowed from serial.c 1144 * I should really spend some time and separate + move this common 1145 * code to serial.c, it is replicated in nearly every serial driver 1146 * you see. 1147 */ 1148 1149 /* 1. Get the baud rate from the tty settings, this observes 1150 alt_speed hack */ 1151 1152 baud = tty_get_baud_rate(tty); 1153 dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); 1154 1155 /* 2. Observe async-compatible custom_divisor hack, update baudrate 1156 if needed */ 1157 1158 if (baud == 38400 && 1159 ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && 1160 (priv->custom_divisor)) { 1161 baud = priv->baud_base / priv->custom_divisor; 1162 dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n", 1163 __func__, priv->custom_divisor, baud); 1164 } 1165 1166 /* 3. Convert baudrate to device-specific divisor */ 1167 1168 if (!baud) 1169 baud = 9600; 1170 switch (priv->chip_type) { 1171 case SIO: /* SIO chip */ 1172 switch (baud) { 1173 case 300: div_value = ftdi_sio_b300; break; 1174 case 600: div_value = ftdi_sio_b600; break; 1175 case 1200: div_value = ftdi_sio_b1200; break; 1176 case 2400: div_value = ftdi_sio_b2400; break; 1177 case 4800: div_value = ftdi_sio_b4800; break; 1178 case 9600: div_value = ftdi_sio_b9600; break; 1179 case 19200: div_value = ftdi_sio_b19200; break; 1180 case 38400: div_value = ftdi_sio_b38400; break; 1181 case 57600: div_value = ftdi_sio_b57600; break; 1182 case 115200: div_value = ftdi_sio_b115200; break; 1183 } /* baud */ 1184 if (div_value == 0) { 1185 dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", 1186 __func__, baud); 1187 div_value = ftdi_sio_b9600; 1188 baud = 9600; 1189 div_okay = 0; 1190 } 1191 break; 1192 case FT8U232AM: /* 8U232AM chip */ 1193 if (baud <= 3000000) { 1194 div_value = ftdi_232am_baud_to_divisor(baud); 1195 } else { 1196 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1197 baud = 9600; 1198 div_value = ftdi_232am_baud_to_divisor(9600); 1199 div_okay = 0; 1200 } 1201 break; 1202 case FT232BM: /* FT232BM chip */ 1203 case FT2232C: /* FT2232C chip */ 1204 case FT232RL: /* FT232RL chip */ 1205 case FTX: /* FT-X series */ 1206 if (baud <= 3000000) { 1207 __u16 product_id = le16_to_cpu( 1208 port->serial->dev->descriptor.idProduct); 1209 if (((FTDI_NDI_HUC_PID == product_id) || 1210 (FTDI_NDI_SPECTRA_SCU_PID == product_id) || 1211 (FTDI_NDI_FUTURE_2_PID == product_id) || 1212 (FTDI_NDI_FUTURE_3_PID == product_id) || 1213 (FTDI_NDI_AURORA_SCU_PID == product_id)) && 1214 (baud == 19200)) { 1215 baud = 1200000; 1216 } 1217 div_value = ftdi_232bm_baud_to_divisor(baud); 1218 } else { 1219 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1220 div_value = ftdi_232bm_baud_to_divisor(9600); 1221 div_okay = 0; 1222 baud = 9600; 1223 } 1224 break; 1225 case FT2232H: /* FT2232H chip */ 1226 case FT4232H: /* FT4232H chip */ 1227 case FT232H: /* FT232H chip */ 1228 if ((baud <= 12000000) && (baud >= 1200)) { 1229 div_value = ftdi_2232h_baud_to_divisor(baud); 1230 } else if (baud < 1200) { 1231 div_value = ftdi_232bm_baud_to_divisor(baud); 1232 } else { 1233 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1234 div_value = ftdi_232bm_baud_to_divisor(9600); 1235 div_okay = 0; 1236 baud = 9600; 1237 } 1238 break; 1239 } /* priv->chip_type */ 1240 1241 if (div_okay) { 1242 dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", 1243 __func__, baud, (unsigned long)div_value, 1244 ftdi_chip_name[priv->chip_type]); 1245 } 1246 1247 tty_encode_baud_rate(tty, baud, baud); 1248 return div_value; 1249 } 1250 1251 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) 1252 { 1253 struct ftdi_private *priv = usb_get_serial_port_data(port); 1254 __u16 urb_value; 1255 __u16 urb_index; 1256 __u32 urb_index_value; 1257 int rv; 1258 1259 urb_index_value = get_ftdi_divisor(tty, port); 1260 urb_value = (__u16)urb_index_value; 1261 urb_index = (__u16)(urb_index_value >> 16); 1262 if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || 1263 (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { 1264 /* Probably the BM type needs the MSB of the encoded fractional 1265 * divider also moved like for the chips above. Any infos? */ 1266 urb_index = (__u16)((urb_index << 8) | priv->interface); 1267 } 1268 1269 rv = usb_control_msg(port->serial->dev, 1270 usb_sndctrlpipe(port->serial->dev, 0), 1271 FTDI_SIO_SET_BAUDRATE_REQUEST, 1272 FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, 1273 urb_value, urb_index, 1274 NULL, 0, WDR_SHORT_TIMEOUT); 1275 return rv; 1276 } 1277 1278 static int write_latency_timer(struct usb_serial_port *port) 1279 { 1280 struct ftdi_private *priv = usb_get_serial_port_data(port); 1281 struct usb_device *udev = port->serial->dev; 1282 int rv; 1283 int l = priv->latency; 1284 1285 if (priv->flags & ASYNC_LOW_LATENCY) 1286 l = 1; 1287 1288 dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l); 1289 1290 rv = usb_control_msg(udev, 1291 usb_sndctrlpipe(udev, 0), 1292 FTDI_SIO_SET_LATENCY_TIMER_REQUEST, 1293 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, 1294 l, priv->interface, 1295 NULL, 0, WDR_TIMEOUT); 1296 if (rv < 0) 1297 dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); 1298 return rv; 1299 } 1300 1301 static int read_latency_timer(struct usb_serial_port *port) 1302 { 1303 struct ftdi_private *priv = usb_get_serial_port_data(port); 1304 struct usb_device *udev = port->serial->dev; 1305 unsigned char *buf; 1306 int rv; 1307 1308 buf = kmalloc(1, GFP_KERNEL); 1309 if (!buf) 1310 return -ENOMEM; 1311 1312 rv = usb_control_msg(udev, 1313 usb_rcvctrlpipe(udev, 0), 1314 FTDI_SIO_GET_LATENCY_TIMER_REQUEST, 1315 FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 1316 0, priv->interface, 1317 buf, 1, WDR_TIMEOUT); 1318 if (rv < 0) 1319 dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); 1320 else 1321 priv->latency = buf[0]; 1322 1323 kfree(buf); 1324 1325 return rv; 1326 } 1327 1328 static int get_serial_info(struct usb_serial_port *port, 1329 struct serial_struct __user *retinfo) 1330 { 1331 struct ftdi_private *priv = usb_get_serial_port_data(port); 1332 struct serial_struct tmp; 1333 1334 if (!retinfo) 1335 return -EFAULT; 1336 memset(&tmp, 0, sizeof(tmp)); 1337 tmp.flags = priv->flags; 1338 tmp.baud_base = priv->baud_base; 1339 tmp.custom_divisor = priv->custom_divisor; 1340 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) 1341 return -EFAULT; 1342 return 0; 1343 } 1344 1345 static int set_serial_info(struct tty_struct *tty, 1346 struct usb_serial_port *port, struct serial_struct __user *newinfo) 1347 { 1348 struct ftdi_private *priv = usb_get_serial_port_data(port); 1349 struct serial_struct new_serial; 1350 struct ftdi_private old_priv; 1351 1352 if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) 1353 return -EFAULT; 1354 1355 mutex_lock(&priv->cfg_lock); 1356 old_priv = *priv; 1357 1358 /* Do error checking and permission checking */ 1359 1360 if (!capable(CAP_SYS_ADMIN)) { 1361 if (((new_serial.flags & ~ASYNC_USR_MASK) != 1362 (priv->flags & ~ASYNC_USR_MASK))) { 1363 mutex_unlock(&priv->cfg_lock); 1364 return -EPERM; 1365 } 1366 priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | 1367 (new_serial.flags & ASYNC_USR_MASK)); 1368 priv->custom_divisor = new_serial.custom_divisor; 1369 goto check_and_exit; 1370 } 1371 1372 if (new_serial.baud_base != priv->baud_base) { 1373 mutex_unlock(&priv->cfg_lock); 1374 return -EINVAL; 1375 } 1376 1377 /* Make the changes - these are privileged changes! */ 1378 1379 priv->flags = ((priv->flags & ~ASYNC_FLAGS) | 1380 (new_serial.flags & ASYNC_FLAGS)); 1381 priv->custom_divisor = new_serial.custom_divisor; 1382 1383 write_latency_timer(port); 1384 1385 check_and_exit: 1386 if ((old_priv.flags & ASYNC_SPD_MASK) != 1387 (priv->flags & ASYNC_SPD_MASK)) { 1388 if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) 1389 tty->alt_speed = 57600; 1390 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) 1391 tty->alt_speed = 115200; 1392 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) 1393 tty->alt_speed = 230400; 1394 else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) 1395 tty->alt_speed = 460800; 1396 else 1397 tty->alt_speed = 0; 1398 } 1399 if (((old_priv.flags & ASYNC_SPD_MASK) != 1400 (priv->flags & ASYNC_SPD_MASK)) || 1401 (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && 1402 (old_priv.custom_divisor != priv->custom_divisor))) { 1403 change_speed(tty, port); 1404 mutex_unlock(&priv->cfg_lock); 1405 } 1406 else 1407 mutex_unlock(&priv->cfg_lock); 1408 return 0; 1409 } 1410 1411 static int get_lsr_info(struct usb_serial_port *port, 1412 struct serial_struct __user *retinfo) 1413 { 1414 struct ftdi_private *priv = usb_get_serial_port_data(port); 1415 unsigned int result = 0; 1416 1417 if (!retinfo) 1418 return -EFAULT; 1419 1420 if (priv->transmit_empty) 1421 result = TIOCSER_TEMT; 1422 1423 if (copy_to_user(retinfo, &result, sizeof(unsigned int))) 1424 return -EFAULT; 1425 return 0; 1426 } 1427 1428 1429 /* Determine type of FTDI chip based on USB config and descriptor. */ 1430 static void ftdi_determine_type(struct usb_serial_port *port) 1431 { 1432 struct ftdi_private *priv = usb_get_serial_port_data(port); 1433 struct usb_serial *serial = port->serial; 1434 struct usb_device *udev = serial->dev; 1435 unsigned version; 1436 unsigned interfaces; 1437 1438 /* Assume it is not the original SIO device for now. */ 1439 priv->baud_base = 48000000 / 2; 1440 1441 version = le16_to_cpu(udev->descriptor.bcdDevice); 1442 interfaces = udev->actconfig->desc.bNumInterfaces; 1443 dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, 1444 version, interfaces); 1445 if (interfaces > 1) { 1446 int inter; 1447 1448 /* Multiple interfaces.*/ 1449 if (version == 0x0800) { 1450 priv->chip_type = FT4232H; 1451 /* Hi-speed - baud clock runs at 120MHz */ 1452 priv->baud_base = 120000000 / 2; 1453 } else if (version == 0x0700) { 1454 priv->chip_type = FT2232H; 1455 /* Hi-speed - baud clock runs at 120MHz */ 1456 priv->baud_base = 120000000 / 2; 1457 } else 1458 priv->chip_type = FT2232C; 1459 1460 /* Determine interface code. */ 1461 inter = serial->interface->altsetting->desc.bInterfaceNumber; 1462 if (inter == 0) { 1463 priv->interface = INTERFACE_A; 1464 } else if (inter == 1) { 1465 priv->interface = INTERFACE_B; 1466 } else if (inter == 2) { 1467 priv->interface = INTERFACE_C; 1468 } else if (inter == 3) { 1469 priv->interface = INTERFACE_D; 1470 } 1471 /* BM-type devices have a bug where bcdDevice gets set 1472 * to 0x200 when iSerialNumber is 0. */ 1473 if (version < 0x500) { 1474 dev_dbg(&port->dev, 1475 "%s: something fishy - bcdDevice too low for multi-interface device\n", 1476 __func__); 1477 } 1478 } else if (version < 0x200) { 1479 /* Old device. Assume it's the original SIO. */ 1480 priv->chip_type = SIO; 1481 priv->baud_base = 12000000 / 16; 1482 } else if (version < 0x400) { 1483 /* Assume it's an FT8U232AM (or FT8U245AM) */ 1484 /* (It might be a BM because of the iSerialNumber bug, 1485 * but it will still work as an AM device.) */ 1486 priv->chip_type = FT8U232AM; 1487 } else if (version < 0x600) { 1488 /* Assume it's an FT232BM (or FT245BM) */ 1489 priv->chip_type = FT232BM; 1490 } else if (version < 0x900) { 1491 /* Assume it's an FT232RL */ 1492 priv->chip_type = FT232RL; 1493 } else if (version < 0x1000) { 1494 /* Assume it's an FT232H */ 1495 priv->chip_type = FT232H; 1496 } else { 1497 /* Assume it's an FT-X series device */ 1498 priv->chip_type = FTX; 1499 } 1500 1501 dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); 1502 } 1503 1504 1505 /* Determine the maximum packet size for the device. This depends on the chip 1506 * type and the USB host capabilities. The value should be obtained from the 1507 * device descriptor as the chip will use the appropriate values for the host.*/ 1508 static void ftdi_set_max_packet_size(struct usb_serial_port *port) 1509 { 1510 struct ftdi_private *priv = usb_get_serial_port_data(port); 1511 struct usb_serial *serial = port->serial; 1512 struct usb_device *udev = serial->dev; 1513 1514 struct usb_interface *interface = serial->interface; 1515 struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; 1516 1517 unsigned num_endpoints; 1518 int i; 1519 1520 num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; 1521 dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); 1522 1523 /* NOTE: some customers have programmed FT232R/FT245R devices 1524 * with an endpoint size of 0 - not good. In this case, we 1525 * want to override the endpoint descriptor setting and use a 1526 * value of 64 for wMaxPacketSize */ 1527 for (i = 0; i < num_endpoints; i++) { 1528 dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1, 1529 interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize); 1530 ep_desc = &interface->cur_altsetting->endpoint[i].desc; 1531 if (ep_desc->wMaxPacketSize == 0) { 1532 ep_desc->wMaxPacketSize = cpu_to_le16(0x40); 1533 dev_info(&udev->dev, "Overriding wMaxPacketSize on endpoint %d\n", i); 1534 } 1535 } 1536 1537 /* set max packet size based on descriptor */ 1538 priv->max_packet_size = usb_endpoint_maxp(ep_desc); 1539 1540 dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); 1541 } 1542 1543 1544 /* 1545 * *************************************************************************** 1546 * Sysfs Attribute 1547 * *************************************************************************** 1548 */ 1549 1550 static ssize_t show_latency_timer(struct device *dev, 1551 struct device_attribute *attr, char *buf) 1552 { 1553 struct usb_serial_port *port = to_usb_serial_port(dev); 1554 struct ftdi_private *priv = usb_get_serial_port_data(port); 1555 if (priv->flags & ASYNC_LOW_LATENCY) 1556 return sprintf(buf, "1\n"); 1557 else 1558 return sprintf(buf, "%i\n", priv->latency); 1559 } 1560 1561 1562 /* Write a new value of the latency timer, in units of milliseconds. */ 1563 static ssize_t store_latency_timer(struct device *dev, 1564 struct device_attribute *attr, const char *valbuf, 1565 size_t count) 1566 { 1567 struct usb_serial_port *port = to_usb_serial_port(dev); 1568 struct ftdi_private *priv = usb_get_serial_port_data(port); 1569 int v = simple_strtoul(valbuf, NULL, 10); 1570 int rv; 1571 1572 priv->latency = v; 1573 rv = write_latency_timer(port); 1574 if (rv < 0) 1575 return -EIO; 1576 return count; 1577 } 1578 1579 /* Write an event character directly to the FTDI register. The ASCII 1580 value is in the low 8 bits, with the enable bit in the 9th bit. */ 1581 static ssize_t store_event_char(struct device *dev, 1582 struct device_attribute *attr, const char *valbuf, size_t count) 1583 { 1584 struct usb_serial_port *port = to_usb_serial_port(dev); 1585 struct ftdi_private *priv = usb_get_serial_port_data(port); 1586 struct usb_device *udev = port->serial->dev; 1587 int v = simple_strtoul(valbuf, NULL, 10); 1588 int rv; 1589 1590 dev_dbg(&port->dev, "%s: setting event char = %i\n", __func__, v); 1591 1592 rv = usb_control_msg(udev, 1593 usb_sndctrlpipe(udev, 0), 1594 FTDI_SIO_SET_EVENT_CHAR_REQUEST, 1595 FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, 1596 v, priv->interface, 1597 NULL, 0, WDR_TIMEOUT); 1598 if (rv < 0) { 1599 dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); 1600 return -EIO; 1601 } 1602 1603 return count; 1604 } 1605 1606 static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, 1607 store_latency_timer); 1608 static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); 1609 1610 static int create_sysfs_attrs(struct usb_serial_port *port) 1611 { 1612 struct ftdi_private *priv = usb_get_serial_port_data(port); 1613 int retval = 0; 1614 1615 /* XXX I've no idea if the original SIO supports the event_char 1616 * sysfs parameter, so I'm playing it safe. */ 1617 if (priv->chip_type != SIO) { 1618 dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); 1619 retval = device_create_file(&port->dev, &dev_attr_event_char); 1620 if ((!retval) && 1621 (priv->chip_type == FT232BM || 1622 priv->chip_type == FT2232C || 1623 priv->chip_type == FT232RL || 1624 priv->chip_type == FT2232H || 1625 priv->chip_type == FT4232H || 1626 priv->chip_type == FT232H || 1627 priv->chip_type == FTX)) { 1628 retval = device_create_file(&port->dev, 1629 &dev_attr_latency_timer); 1630 } 1631 } 1632 return retval; 1633 } 1634 1635 static void remove_sysfs_attrs(struct usb_serial_port *port) 1636 { 1637 struct ftdi_private *priv = usb_get_serial_port_data(port); 1638 1639 /* XXX see create_sysfs_attrs */ 1640 if (priv->chip_type != SIO) { 1641 device_remove_file(&port->dev, &dev_attr_event_char); 1642 if (priv->chip_type == FT232BM || 1643 priv->chip_type == FT2232C || 1644 priv->chip_type == FT232RL || 1645 priv->chip_type == FT2232H || 1646 priv->chip_type == FT4232H || 1647 priv->chip_type == FT232H || 1648 priv->chip_type == FTX) { 1649 device_remove_file(&port->dev, &dev_attr_latency_timer); 1650 } 1651 } 1652 1653 } 1654 1655 /* 1656 * *************************************************************************** 1657 * FTDI driver specific functions 1658 * *************************************************************************** 1659 */ 1660 1661 /* Probe function to check for special devices */ 1662 static int ftdi_sio_probe(struct usb_serial *serial, 1663 const struct usb_device_id *id) 1664 { 1665 struct ftdi_sio_quirk *quirk = 1666 (struct ftdi_sio_quirk *)id->driver_info; 1667 1668 if (quirk && quirk->probe) { 1669 int ret = quirk->probe(serial); 1670 if (ret != 0) 1671 return ret; 1672 } 1673 1674 usb_set_serial_data(serial, (void *)id->driver_info); 1675 1676 return 0; 1677 } 1678 1679 static int ftdi_sio_port_probe(struct usb_serial_port *port) 1680 { 1681 struct ftdi_private *priv; 1682 struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); 1683 1684 1685 priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); 1686 if (!priv) { 1687 dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, 1688 sizeof(struct ftdi_private)); 1689 return -ENOMEM; 1690 } 1691 1692 kref_init(&priv->kref); 1693 mutex_init(&priv->cfg_lock); 1694 init_waitqueue_head(&priv->delta_msr_wait); 1695 1696 priv->flags = ASYNC_LOW_LATENCY; 1697 priv->dev_gone = false; 1698 1699 if (quirk && quirk->port_probe) 1700 quirk->port_probe(priv); 1701 1702 usb_set_serial_port_data(port, priv); 1703 1704 ftdi_determine_type(port); 1705 ftdi_set_max_packet_size(port); 1706 if (read_latency_timer(port) < 0) 1707 priv->latency = 16; 1708 write_latency_timer(port); 1709 create_sysfs_attrs(port); 1710 return 0; 1711 } 1712 1713 /* Setup for the USB-UIRT device, which requires hardwired 1714 * baudrate (38400 gets mapped to 312500) */ 1715 /* Called from usbserial:serial_probe */ 1716 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) 1717 { 1718 priv->flags |= ASYNC_SPD_CUST; 1719 priv->custom_divisor = 77; 1720 priv->force_baud = 38400; 1721 } 1722 1723 /* Setup for the HE-TIRA1 device, which requires hardwired 1724 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ 1725 1726 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) 1727 { 1728 priv->flags |= ASYNC_SPD_CUST; 1729 priv->custom_divisor = 240; 1730 priv->force_baud = 38400; 1731 priv->force_rtscts = 1; 1732 } 1733 1734 /* 1735 * Module parameter to control latency timer for NDI FTDI-based USB devices. 1736 * If this value is not set in /etc/modprobe.d/ its value will be set 1737 * to 1ms. 1738 */ 1739 static int ndi_latency_timer = 1; 1740 1741 /* Setup for the NDI FTDI-based USB devices, which requires hardwired 1742 * baudrate (19200 gets mapped to 1200000). 1743 * 1744 * Called from usbserial:serial_probe. 1745 */ 1746 static int ftdi_NDI_device_setup(struct usb_serial *serial) 1747 { 1748 struct usb_device *udev = serial->dev; 1749 int latency = ndi_latency_timer; 1750 1751 if (latency == 0) 1752 latency = 1; 1753 if (latency > 99) 1754 latency = 99; 1755 1756 dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency); 1757 dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency); 1758 1759 /* FIXME: errors are not returned */ 1760 usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 1761 FTDI_SIO_SET_LATENCY_TIMER_REQUEST, 1762 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, 1763 latency, 0, NULL, 0, WDR_TIMEOUT); 1764 return 0; 1765 } 1766 1767 /* 1768 * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko 1769 * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from 1770 * userspace using openocd. 1771 */ 1772 static int ftdi_jtag_probe(struct usb_serial *serial) 1773 { 1774 struct usb_device *udev = serial->dev; 1775 struct usb_interface *interface = serial->interface; 1776 1777 if (interface == udev->actconfig->interface[0]) { 1778 dev_info(&udev->dev, 1779 "Ignoring serial port reserved for JTAG\n"); 1780 return -ENODEV; 1781 } 1782 1783 return 0; 1784 } 1785 1786 static int ftdi_8u2232c_probe(struct usb_serial *serial) 1787 { 1788 struct usb_device *udev = serial->dev; 1789 1790 if ((udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) || 1791 (udev->product && !strcmp(udev->product, "BeagleBone/XDS100V2"))) 1792 return ftdi_jtag_probe(serial); 1793 1794 return 0; 1795 } 1796 1797 /* 1798 * First and second port on STMCLiteadaptors is reserved for JTAG interface 1799 * and the forth port for pio 1800 */ 1801 static int ftdi_stmclite_probe(struct usb_serial *serial) 1802 { 1803 struct usb_device *udev = serial->dev; 1804 struct usb_interface *interface = serial->interface; 1805 1806 if (interface == udev->actconfig->interface[2]) 1807 return 0; 1808 1809 dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); 1810 1811 return -ENODEV; 1812 } 1813 1814 /* 1815 * The Matrix Orbital VK204-25-USB has an invalid IN endpoint. 1816 * We have to correct it if we want to read from it. 1817 */ 1818 static int ftdi_mtxorb_hack_setup(struct usb_serial *serial) 1819 { 1820 struct usb_host_endpoint *ep = serial->dev->ep_in[1]; 1821 struct usb_endpoint_descriptor *ep_desc = &ep->desc; 1822 1823 if (ep->enabled && ep_desc->wMaxPacketSize == 0) { 1824 ep_desc->wMaxPacketSize = cpu_to_le16(0x40); 1825 dev_info(&serial->dev->dev, 1826 "Fixing invalid wMaxPacketSize on read pipe\n"); 1827 } 1828 1829 return 0; 1830 } 1831 1832 static void ftdi_sio_priv_release(struct kref *k) 1833 { 1834 struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); 1835 1836 kfree(priv); 1837 } 1838 1839 static int ftdi_sio_port_remove(struct usb_serial_port *port) 1840 { 1841 struct ftdi_private *priv = usb_get_serial_port_data(port); 1842 1843 priv->dev_gone = true; 1844 wake_up_interruptible_all(&priv->delta_msr_wait); 1845 1846 remove_sysfs_attrs(port); 1847 1848 kref_put(&priv->kref, ftdi_sio_priv_release); 1849 1850 return 0; 1851 } 1852 1853 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) 1854 { 1855 struct ktermios dummy; 1856 struct usb_device *dev = port->serial->dev; 1857 struct ftdi_private *priv = usb_get_serial_port_data(port); 1858 int result; 1859 1860 /* No error checking for this (will get errors later anyway) */ 1861 /* See ftdi_sio.h for description of what is reset */ 1862 usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 1863 FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, 1864 FTDI_SIO_RESET_SIO, 1865 priv->interface, NULL, 0, WDR_TIMEOUT); 1866 1867 /* Termios defaults are set by usb_serial_init. We don't change 1868 port->tty->termios - this would lose speed settings, etc. 1869 This is same behaviour as serial.c/rs_open() - Kuba */ 1870 1871 /* ftdi_set_termios will send usb control messages */ 1872 if (tty) { 1873 memset(&dummy, 0, sizeof(dummy)); 1874 ftdi_set_termios(tty, port, &dummy); 1875 } 1876 1877 /* Start reading from the device */ 1878 result = usb_serial_generic_open(tty, port); 1879 if (!result) 1880 kref_get(&priv->kref); 1881 1882 return result; 1883 } 1884 1885 static void ftdi_dtr_rts(struct usb_serial_port *port, int on) 1886 { 1887 struct ftdi_private *priv = usb_get_serial_port_data(port); 1888 1889 /* Disable flow control */ 1890 if (!on) { 1891 if (usb_control_msg(port->serial->dev, 1892 usb_sndctrlpipe(port->serial->dev, 0), 1893 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 1894 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 1895 0, priv->interface, NULL, 0, 1896 WDR_TIMEOUT) < 0) { 1897 dev_err(&port->dev, "error from flowcontrol urb\n"); 1898 } 1899 } 1900 /* drop RTS and DTR */ 1901 if (on) 1902 set_mctrl(port, TIOCM_DTR | TIOCM_RTS); 1903 else 1904 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); 1905 } 1906 1907 /* 1908 * usbserial:__serial_close only calls ftdi_close if the point is open 1909 * 1910 * This only gets called when it is the last close 1911 */ 1912 static void ftdi_close(struct usb_serial_port *port) 1913 { 1914 struct ftdi_private *priv = usb_get_serial_port_data(port); 1915 1916 usb_serial_generic_close(port); 1917 kref_put(&priv->kref, ftdi_sio_priv_release); 1918 } 1919 1920 /* The SIO requires the first byte to have: 1921 * B0 1 1922 * B1 0 1923 * B2..7 length of message excluding byte 0 1924 * 1925 * The new devices do not require this byte 1926 */ 1927 static int ftdi_prepare_write_buffer(struct usb_serial_port *port, 1928 void *dest, size_t size) 1929 { 1930 struct ftdi_private *priv; 1931 int count; 1932 unsigned long flags; 1933 1934 priv = usb_get_serial_port_data(port); 1935 1936 if (priv->chip_type == SIO) { 1937 unsigned char *buffer = dest; 1938 int i, len, c; 1939 1940 count = 0; 1941 spin_lock_irqsave(&port->lock, flags); 1942 for (i = 0; i < size - 1; i += priv->max_packet_size) { 1943 len = min_t(int, size - i, priv->max_packet_size) - 1; 1944 c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); 1945 if (!c) 1946 break; 1947 priv->icount.tx += c; 1948 buffer[i] = (c << 2) + 1; 1949 count += c + 1; 1950 } 1951 spin_unlock_irqrestore(&port->lock, flags); 1952 } else { 1953 count = kfifo_out_locked(&port->write_fifo, dest, size, 1954 &port->lock); 1955 priv->icount.tx += count; 1956 } 1957 1958 return count; 1959 } 1960 1961 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) 1962 1963 static int ftdi_process_packet(struct usb_serial_port *port, 1964 struct ftdi_private *priv, char *packet, int len) 1965 { 1966 int i; 1967 char status; 1968 char flag; 1969 char *ch; 1970 1971 if (len < 2) { 1972 dev_dbg(&port->dev, "malformed packet\n"); 1973 return 0; 1974 } 1975 1976 /* Compare new line status to the old one, signal if different/ 1977 N.B. packet may be processed more than once, but differences 1978 are only processed once. */ 1979 status = packet[0] & FTDI_STATUS_B0_MASK; 1980 if (status != priv->prev_status) { 1981 char diff_status = status ^ priv->prev_status; 1982 1983 if (diff_status & FTDI_RS0_CTS) 1984 priv->icount.cts++; 1985 if (diff_status & FTDI_RS0_DSR) 1986 priv->icount.dsr++; 1987 if (diff_status & FTDI_RS0_RI) 1988 priv->icount.rng++; 1989 if (diff_status & FTDI_RS0_RLSD) 1990 priv->icount.dcd++; 1991 1992 wake_up_interruptible_all(&priv->delta_msr_wait); 1993 priv->prev_status = status; 1994 } 1995 1996 flag = TTY_NORMAL; 1997 if (packet[1] & FTDI_RS_ERR_MASK) { 1998 /* Break takes precedence over parity, which takes precedence 1999 * over framing errors */ 2000 if (packet[1] & FTDI_RS_BI) { 2001 flag = TTY_BREAK; 2002 priv->icount.brk++; 2003 usb_serial_handle_break(port); 2004 } else if (packet[1] & FTDI_RS_PE) { 2005 flag = TTY_PARITY; 2006 priv->icount.parity++; 2007 } else if (packet[1] & FTDI_RS_FE) { 2008 flag = TTY_FRAME; 2009 priv->icount.frame++; 2010 } 2011 /* Overrun is special, not associated with a char */ 2012 if (packet[1] & FTDI_RS_OE) { 2013 priv->icount.overrun++; 2014 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); 2015 } 2016 } 2017 2018 /* save if the transmitter is empty or not */ 2019 if (packet[1] & FTDI_RS_TEMT) 2020 priv->transmit_empty = 1; 2021 else 2022 priv->transmit_empty = 0; 2023 2024 len -= 2; 2025 if (!len) 2026 return 0; /* status only */ 2027 priv->icount.rx += len; 2028 ch = packet + 2; 2029 2030 if (port->port.console && port->sysrq) { 2031 for (i = 0; i < len; i++, ch++) { 2032 if (!usb_serial_handle_sysrq_char(port, *ch)) 2033 tty_insert_flip_char(&port->port, *ch, flag); 2034 } 2035 } else { 2036 tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); 2037 } 2038 2039 return len; 2040 } 2041 2042 static void ftdi_process_read_urb(struct urb *urb) 2043 { 2044 struct usb_serial_port *port = urb->context; 2045 struct ftdi_private *priv = usb_get_serial_port_data(port); 2046 char *data = (char *)urb->transfer_buffer; 2047 int i; 2048 int len; 2049 int count = 0; 2050 2051 for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { 2052 len = min_t(int, urb->actual_length - i, priv->max_packet_size); 2053 count += ftdi_process_packet(port, priv, &data[i], len); 2054 } 2055 2056 if (count) 2057 tty_flip_buffer_push(&port->port); 2058 } 2059 2060 static void ftdi_break_ctl(struct tty_struct *tty, int break_state) 2061 { 2062 struct usb_serial_port *port = tty->driver_data; 2063 struct ftdi_private *priv = usb_get_serial_port_data(port); 2064 __u16 urb_value; 2065 2066 /* break_state = -1 to turn on break, and 0 to turn off break */ 2067 /* see drivers/char/tty_io.c to see it used */ 2068 /* last_set_data_urb_value NEVER has the break bit set in it */ 2069 2070 if (break_state) 2071 urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; 2072 else 2073 urb_value = priv->last_set_data_urb_value; 2074 2075 if (usb_control_msg(port->serial->dev, 2076 usb_sndctrlpipe(port->serial->dev, 0), 2077 FTDI_SIO_SET_DATA_REQUEST, 2078 FTDI_SIO_SET_DATA_REQUEST_TYPE, 2079 urb_value , priv->interface, 2080 NULL, 0, WDR_TIMEOUT) < 0) { 2081 dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", 2082 __func__, break_state); 2083 } 2084 2085 dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, 2086 break_state, urb_value); 2087 2088 } 2089 2090 static int ftdi_chars_in_buffer(struct tty_struct *tty) 2091 { 2092 struct usb_serial_port *port = tty->driver_data; 2093 int chars; 2094 unsigned char buf[2]; 2095 int ret; 2096 2097 chars = usb_serial_generic_chars_in_buffer(tty); 2098 if (chars) 2099 goto out; 2100 2101 /* Check if hardware buffer is empty. */ 2102 ret = ftdi_get_modem_status(tty, buf); 2103 if (ret == 2) { 2104 if (!(buf[1] & FTDI_RS_TEMT)) 2105 chars = 1; 2106 } 2107 out: 2108 dev_dbg(&port->dev, "%s - %d\n", __func__, chars); 2109 2110 return chars; 2111 } 2112 2113 /* old_termios contains the original termios settings and tty->termios contains 2114 * the new setting to be used 2115 * WARNING: set_termios calls this with old_termios in kernel space 2116 */ 2117 static void ftdi_set_termios(struct tty_struct *tty, 2118 struct usb_serial_port *port, struct ktermios *old_termios) 2119 { 2120 struct usb_device *dev = port->serial->dev; 2121 struct device *ddev = &port->dev; 2122 struct ftdi_private *priv = usb_get_serial_port_data(port); 2123 struct ktermios *termios = &tty->termios; 2124 unsigned int cflag = termios->c_cflag; 2125 __u16 urb_value; /* will hold the new flags */ 2126 2127 /* Added for xon/xoff support */ 2128 unsigned int iflag = termios->c_iflag; 2129 unsigned char vstop; 2130 unsigned char vstart; 2131 2132 /* Force baud rate if this device requires it, unless it is set to 2133 B0. */ 2134 if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { 2135 dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__); 2136 tty_encode_baud_rate(tty, priv->force_baud, 2137 priv->force_baud); 2138 } 2139 2140 /* Force RTS-CTS if this device requires it. */ 2141 if (priv->force_rtscts) { 2142 dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__); 2143 termios->c_cflag |= CRTSCTS; 2144 } 2145 2146 cflag = termios->c_cflag; 2147 2148 if (!old_termios) 2149 goto no_skip; 2150 2151 if (old_termios->c_cflag == termios->c_cflag 2152 && old_termios->c_ispeed == termios->c_ispeed 2153 && old_termios->c_ospeed == termios->c_ospeed) 2154 goto no_c_cflag_changes; 2155 2156 /* NOTE These routines can get interrupted by 2157 ftdi_sio_read_bulk_callback - need to examine what this means - 2158 don't see any problems yet */ 2159 2160 if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == 2161 (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) 2162 goto no_data_parity_stop_changes; 2163 2164 no_skip: 2165 /* Set number of data bits, parity, stop bits */ 2166 2167 urb_value = 0; 2168 urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : 2169 FTDI_SIO_SET_DATA_STOP_BITS_1); 2170 if (cflag & PARENB) { 2171 if (cflag & CMSPAR) 2172 urb_value |= cflag & PARODD ? 2173 FTDI_SIO_SET_DATA_PARITY_MARK : 2174 FTDI_SIO_SET_DATA_PARITY_SPACE; 2175 else 2176 urb_value |= cflag & PARODD ? 2177 FTDI_SIO_SET_DATA_PARITY_ODD : 2178 FTDI_SIO_SET_DATA_PARITY_EVEN; 2179 } else { 2180 urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; 2181 } 2182 if (cflag & CSIZE) { 2183 switch (cflag & CSIZE) { 2184 case CS7: 2185 urb_value |= 7; 2186 dev_dbg(ddev, "Setting CS7\n"); 2187 break; 2188 case CS8: 2189 urb_value |= 8; 2190 dev_dbg(ddev, "Setting CS8\n"); 2191 break; 2192 default: 2193 dev_err(ddev, "CSIZE was set but not CS7-CS8\n"); 2194 } 2195 } 2196 2197 /* This is needed by the break command since it uses the same command 2198 - but is or'ed with this value */ 2199 priv->last_set_data_urb_value = urb_value; 2200 2201 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2202 FTDI_SIO_SET_DATA_REQUEST, 2203 FTDI_SIO_SET_DATA_REQUEST_TYPE, 2204 urb_value , priv->interface, 2205 NULL, 0, WDR_SHORT_TIMEOUT) < 0) { 2206 dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", 2207 __func__); 2208 } 2209 2210 /* Now do the baudrate */ 2211 no_data_parity_stop_changes: 2212 if ((cflag & CBAUD) == B0) { 2213 /* Disable flow control */ 2214 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2215 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2216 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2217 0, priv->interface, 2218 NULL, 0, WDR_TIMEOUT) < 0) { 2219 dev_err(ddev, "%s error from disable flowcontrol urb\n", 2220 __func__); 2221 } 2222 /* Drop RTS and DTR */ 2223 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2224 } else { 2225 /* set the baudrate determined before */ 2226 mutex_lock(&priv->cfg_lock); 2227 if (change_speed(tty, port)) 2228 dev_err(ddev, "%s urb failed to set baudrate\n", __func__); 2229 mutex_unlock(&priv->cfg_lock); 2230 /* Ensure RTS and DTR are raised when baudrate changed from 0 */ 2231 if (!old_termios || (old_termios->c_cflag & CBAUD) == B0) 2232 set_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2233 } 2234 2235 /* Set flow control */ 2236 /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ 2237 no_c_cflag_changes: 2238 if (cflag & CRTSCTS) { 2239 dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); 2240 if (usb_control_msg(dev, 2241 usb_sndctrlpipe(dev, 0), 2242 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2243 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2244 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), 2245 NULL, 0, WDR_TIMEOUT) < 0) { 2246 dev_err(ddev, "urb failed to set to rts/cts flow control\n"); 2247 } 2248 } else { 2249 /* 2250 * Xon/Xoff code 2251 * 2252 * Check the IXOFF status in the iflag component of the 2253 * termios structure. If IXOFF is not set, the pre-xon/xoff 2254 * code is executed. 2255 */ 2256 if (iflag & IXOFF) { 2257 dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", 2258 __func__, iflag); 2259 /* Try to enable the XON/XOFF on the ftdi_sio 2260 * Set the vstart and vstop -- could have been done up 2261 * above where a lot of other dereferencing is done but 2262 * that would be very inefficient as vstart and vstop 2263 * are not always needed. 2264 */ 2265 vstart = termios->c_cc[VSTART]; 2266 vstop = termios->c_cc[VSTOP]; 2267 urb_value = (vstop << 8) | (vstart); 2268 2269 if (usb_control_msg(dev, 2270 usb_sndctrlpipe(dev, 0), 2271 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2272 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2273 urb_value , (FTDI_SIO_XON_XOFF_HS 2274 | priv->interface), 2275 NULL, 0, WDR_TIMEOUT) < 0) { 2276 dev_err(&port->dev, "urb failed to set to " 2277 "xon/xoff flow control\n"); 2278 } 2279 } else { 2280 /* else clause to only run if cflag ! CRTSCTS and iflag 2281 * ! XOFF. CHECKME Assuming XON/XOFF handled by tty 2282 * stack - not by device */ 2283 dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); 2284 if (usb_control_msg(dev, 2285 usb_sndctrlpipe(dev, 0), 2286 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2287 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2288 0, priv->interface, 2289 NULL, 0, WDR_TIMEOUT) < 0) { 2290 dev_err(ddev, "urb failed to clear flow control\n"); 2291 } 2292 } 2293 } 2294 } 2295 2296 /* 2297 * Get modem-control status. 2298 * 2299 * Returns the number of status bytes retrieved (device dependant), or 2300 * negative error code. 2301 */ 2302 static int ftdi_get_modem_status(struct tty_struct *tty, 2303 unsigned char status[2]) 2304 { 2305 struct usb_serial_port *port = tty->driver_data; 2306 struct ftdi_private *priv = usb_get_serial_port_data(port); 2307 unsigned char *buf; 2308 int len; 2309 int ret; 2310 2311 buf = kmalloc(2, GFP_KERNEL); 2312 if (!buf) 2313 return -ENOMEM; 2314 /* 2315 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in 2316 * the same format as the data returned from the in point. 2317 */ 2318 switch (priv->chip_type) { 2319 case SIO: 2320 len = 1; 2321 break; 2322 case FT8U232AM: 2323 case FT232BM: 2324 case FT2232C: 2325 case FT232RL: 2326 case FT2232H: 2327 case FT4232H: 2328 case FT232H: 2329 case FTX: 2330 len = 2; 2331 break; 2332 default: 2333 ret = -EFAULT; 2334 goto out; 2335 } 2336 2337 ret = usb_control_msg(port->serial->dev, 2338 usb_rcvctrlpipe(port->serial->dev, 0), 2339 FTDI_SIO_GET_MODEM_STATUS_REQUEST, 2340 FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 2341 0, priv->interface, 2342 buf, len, WDR_TIMEOUT); 2343 if (ret < 0) { 2344 dev_err(&port->dev, "failed to get modem status: %d\n", ret); 2345 ret = usb_translate_errors(ret); 2346 goto out; 2347 } 2348 2349 status[0] = buf[0]; 2350 if (ret > 1) 2351 status[1] = buf[1]; 2352 else 2353 status[1] = 0; 2354 2355 dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0], 2356 status[1]); 2357 out: 2358 kfree(buf); 2359 2360 return ret; 2361 } 2362 2363 static int ftdi_tiocmget(struct tty_struct *tty) 2364 { 2365 struct usb_serial_port *port = tty->driver_data; 2366 struct ftdi_private *priv = usb_get_serial_port_data(port); 2367 unsigned char buf[2]; 2368 int ret; 2369 2370 ret = ftdi_get_modem_status(tty, buf); 2371 if (ret < 0) 2372 return ret; 2373 2374 ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | 2375 (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | 2376 (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | 2377 (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | 2378 priv->last_dtr_rts; 2379 2380 return ret; 2381 } 2382 2383 static int ftdi_tiocmset(struct tty_struct *tty, 2384 unsigned int set, unsigned int clear) 2385 { 2386 struct usb_serial_port *port = tty->driver_data; 2387 2388 return update_mctrl(port, set, clear); 2389 } 2390 2391 static int ftdi_get_icount(struct tty_struct *tty, 2392 struct serial_icounter_struct *icount) 2393 { 2394 struct usb_serial_port *port = tty->driver_data; 2395 struct ftdi_private *priv = usb_get_serial_port_data(port); 2396 struct async_icount *ic = &priv->icount; 2397 2398 icount->cts = ic->cts; 2399 icount->dsr = ic->dsr; 2400 icount->rng = ic->rng; 2401 icount->dcd = ic->dcd; 2402 icount->tx = ic->tx; 2403 icount->rx = ic->rx; 2404 icount->frame = ic->frame; 2405 icount->parity = ic->parity; 2406 icount->overrun = ic->overrun; 2407 icount->brk = ic->brk; 2408 icount->buf_overrun = ic->buf_overrun; 2409 return 0; 2410 } 2411 2412 static int ftdi_ioctl(struct tty_struct *tty, 2413 unsigned int cmd, unsigned long arg) 2414 { 2415 struct usb_serial_port *port = tty->driver_data; 2416 struct ftdi_private *priv = usb_get_serial_port_data(port); 2417 struct async_icount cnow; 2418 struct async_icount cprev; 2419 2420 dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); 2421 2422 /* Based on code from acm.c and others */ 2423 switch (cmd) { 2424 2425 case TIOCGSERIAL: /* gets serial port data */ 2426 return get_serial_info(port, 2427 (struct serial_struct __user *) arg); 2428 2429 case TIOCSSERIAL: /* sets serial port data */ 2430 return set_serial_info(tty, port, 2431 (struct serial_struct __user *) arg); 2432 2433 /* 2434 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change 2435 * - mask passed in arg for lines of interest 2436 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) 2437 * Caller should use TIOCGICOUNT to see which one it was. 2438 * 2439 * This code is borrowed from linux/drivers/char/serial.c 2440 */ 2441 case TIOCMIWAIT: 2442 cprev = priv->icount; 2443 while (!priv->dev_gone) { 2444 interruptible_sleep_on(&priv->delta_msr_wait); 2445 /* see if a signal did it */ 2446 if (signal_pending(current)) 2447 return -ERESTARTSYS; 2448 cnow = priv->icount; 2449 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || 2450 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || 2451 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || 2452 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { 2453 return 0; 2454 } 2455 cprev = cnow; 2456 } 2457 return -EIO; 2458 break; 2459 case TIOCSERGETLSR: 2460 return get_lsr_info(port, (struct serial_struct __user *)arg); 2461 break; 2462 default: 2463 break; 2464 } 2465 /* This is not necessarily an error - turns out the higher layers 2466 * will do some ioctls themselves (see comment above) 2467 */ 2468 dev_dbg(&port->dev, "%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h\n", 2469 __func__, cmd); 2470 return -ENOIOCTLCMD; 2471 } 2472 2473 static int __init ftdi_init(void) 2474 { 2475 if (vendor > 0 && product > 0) { 2476 /* Add user specified VID/PID to reserved element of table. */ 2477 int i; 2478 for (i = 0; id_table_combined[i].idVendor; i++) 2479 ; 2480 id_table_combined[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE; 2481 id_table_combined[i].idVendor = vendor; 2482 id_table_combined[i].idProduct = product; 2483 } 2484 return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, id_table_combined); 2485 } 2486 2487 static void __exit ftdi_exit(void) 2488 { 2489 usb_serial_deregister_drivers(serial_drivers); 2490 } 2491 2492 2493 module_init(ftdi_init); 2494 module_exit(ftdi_exit); 2495 2496 MODULE_AUTHOR(DRIVER_AUTHOR); 2497 MODULE_DESCRIPTION(DRIVER_DESC); 2498 MODULE_LICENSE("GPL"); 2499 2500 module_param(vendor, ushort, 0); 2501 MODULE_PARM_DESC(vendor, "User specified vendor ID (default=" 2502 __MODULE_STRING(FTDI_VID)")"); 2503 module_param(product, ushort, 0); 2504 MODULE_PARM_DESC(product, "User specified product ID"); 2505 2506 module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); 2507 MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); 2508