1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * USB FTDI SIO driver 4 * 5 * Copyright (C) 2009 - 2013 6 * Johan Hovold (jhovold@gmail.com) 7 * Copyright (C) 1999 - 2001 8 * Greg Kroah-Hartman (greg@kroah.com) 9 * Bill Ryder (bryder@sgi.com) 10 * Copyright (C) 2002 11 * Kuba Ober (kuba@mareimbrium.org) 12 * 13 * See Documentation/usb/usb-serial.rst for more information on using this 14 * driver 15 * 16 * See http://ftdi-usb-sio.sourceforge.net for up to date testing info 17 * and extra documentation 18 * 19 * Change entries from 2004 and earlier can be found in versions of this 20 * file in kernel versions prior to the 2.6.24 release. 21 * 22 */ 23 24 /* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ 25 /* Thanx to FTDI for so kindly providing details of the protocol required */ 26 /* to talk to the device */ 27 /* Thanx to gkh and the rest of the usb dev group for all code I have 28 assimilated :-) */ 29 30 #include <linux/kernel.h> 31 #include <linux/errno.h> 32 #include <linux/slab.h> 33 #include <linux/tty.h> 34 #include <linux/tty_driver.h> 35 #include <linux/tty_flip.h> 36 #include <linux/module.h> 37 #include <linux/spinlock.h> 38 #include <linux/mutex.h> 39 #include <linux/uaccess.h> 40 #include <linux/usb.h> 41 #include <linux/serial.h> 42 #include <linux/gpio/driver.h> 43 #include <linux/usb/serial.h> 44 #include "ftdi_sio.h" 45 #include "ftdi_sio_ids.h" 46 47 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" 48 #define DRIVER_DESC "USB FTDI Serial Converters Driver" 49 50 51 struct ftdi_private { 52 enum ftdi_chip_type chip_type; 53 /* type of device, either SIO or FT8U232AM */ 54 int baud_base; /* baud base clock for divisor setting */ 55 int custom_divisor; /* custom_divisor kludge, this is for 56 baud_base (different from what goes to the 57 chip!) */ 58 u16 last_set_data_value; /* the last data state set - needed for doing 59 * a break 60 */ 61 int flags; /* some ASYNC_xxxx flags are supported */ 62 unsigned long last_dtr_rts; /* saved modem control outputs */ 63 char prev_status; /* Used for TIOCMIWAIT */ 64 char transmit_empty; /* If transmitter is empty or not */ 65 u16 interface; /* FT2232C, FT2232H or FT4232H port interface 66 (0 for FT232/245) */ 67 68 speed_t force_baud; /* if non-zero, force the baud rate to 69 this value */ 70 int force_rtscts; /* if non-zero, force RTS-CTS to always 71 be enabled */ 72 73 unsigned int latency; /* latency setting in use */ 74 unsigned short max_packet_size; 75 struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */ 76 #ifdef CONFIG_GPIOLIB 77 struct gpio_chip gc; 78 struct mutex gpio_lock; /* protects GPIO state */ 79 bool gpio_registered; /* is the gpiochip in kernel registered */ 80 bool gpio_used; /* true if the user requested a gpio */ 81 u8 gpio_altfunc; /* which pins are in gpio mode */ 82 u8 gpio_output; /* pin directions cache */ 83 u8 gpio_value; /* pin value for outputs */ 84 #endif 85 }; 86 87 /* struct ftdi_sio_quirk is used by devices requiring special attention. */ 88 struct ftdi_sio_quirk { 89 int (*probe)(struct usb_serial *); 90 /* Special settings for probed ports. */ 91 void (*port_probe)(struct ftdi_private *); 92 }; 93 94 static int ftdi_jtag_probe(struct usb_serial *serial); 95 static int ftdi_NDI_device_setup(struct usb_serial *serial); 96 static int ftdi_stmclite_probe(struct usb_serial *serial); 97 static int ftdi_8u2232c_probe(struct usb_serial *serial); 98 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); 99 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); 100 101 static const struct ftdi_sio_quirk ftdi_jtag_quirk = { 102 .probe = ftdi_jtag_probe, 103 }; 104 105 static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = { 106 .probe = ftdi_NDI_device_setup, 107 }; 108 109 static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { 110 .port_probe = ftdi_USB_UIRT_setup, 111 }; 112 113 static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { 114 .port_probe = ftdi_HE_TIRA1_setup, 115 }; 116 117 static const struct ftdi_sio_quirk ftdi_stmclite_quirk = { 118 .probe = ftdi_stmclite_probe, 119 }; 120 121 static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = { 122 .probe = ftdi_8u2232c_probe, 123 }; 124 125 /* 126 * The 8U232AM has the same API as the sio except for: 127 * - it can support MUCH higher baudrates; up to: 128 * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz 129 * o 230400 at 12MHz 130 * so .. 8U232AM's baudrate setting codes are different 131 * - it has a two byte status code. 132 * - it returns characters every 16ms (the FTDI does it every 40ms) 133 * 134 * the bcdDevice value is used to differentiate FT232BM and FT245BM from 135 * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID 136 * combinations in both tables. 137 * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices, 138 * but I don't know if those ever went into mass production. [Ian Abbott] 139 */ 140 141 142 143 /* 144 * Device ID not listed? Test it using 145 * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report. 146 */ 147 static const struct usb_device_id id_table_combined[] = { 148 { USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) }, 149 { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) }, 150 { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) }, 151 { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) }, 152 { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, 153 { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, 154 { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, 155 { USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) }, 156 { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, 157 { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) }, 158 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, 159 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, 160 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, 161 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) }, 162 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) }, 163 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) }, 164 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) }, 165 { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) }, 166 { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) }, 167 { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) }, 168 { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) }, 169 { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, 170 { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, 171 { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, 172 { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) }, 173 { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) }, 174 { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, 175 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, 176 { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, 177 { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, 178 { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , 179 .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, 180 { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, 181 { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, 182 { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) }, 183 { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, 184 { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, 185 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, 186 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) }, 187 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, 188 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, 189 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, 190 { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, 191 { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, 192 { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) }, 193 { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) }, 194 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, 195 { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, 196 { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, 197 { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) }, 198 { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) }, 199 { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) }, 200 { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, 201 { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, 202 { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, 203 { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) }, 204 { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) }, 205 { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) }, 206 { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, 207 { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, 208 { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, 209 { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) }, 210 { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) }, 211 { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, 212 { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, 213 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, 214 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) }, 215 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) }, 216 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) }, 217 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, 218 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, 219 { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, 220 { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, 221 { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) }, 222 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, 223 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, 224 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, 225 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) }, 226 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) }, 227 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) }, 228 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) }, 229 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) }, 230 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) }, 231 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) }, 232 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) }, 233 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) }, 234 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) }, 235 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) }, 236 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) }, 237 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) }, 238 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) }, 239 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) }, 240 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) }, 241 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) }, 242 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) }, 243 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) }, 244 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) }, 245 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) }, 246 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) }, 247 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) }, 248 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) }, 249 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) }, 250 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) }, 251 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) }, 252 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) }, 253 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) }, 254 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) }, 255 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) }, 256 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) }, 257 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) }, 258 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) }, 259 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) }, 260 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) }, 261 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) }, 262 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) }, 263 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) }, 264 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) }, 265 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) }, 266 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) }, 267 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) }, 268 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) }, 269 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) }, 270 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) }, 271 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) }, 272 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) }, 273 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) }, 274 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) }, 275 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) }, 276 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) }, 277 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) }, 278 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) }, 279 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) }, 280 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) }, 281 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) }, 282 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) }, 283 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) }, 284 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) }, 285 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) }, 286 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) }, 287 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) }, 288 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) }, 289 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) }, 290 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) }, 291 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) }, 292 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) }, 293 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) }, 294 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) }, 295 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) }, 296 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) }, 297 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) }, 298 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) }, 299 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) }, 300 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) }, 301 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) }, 302 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) }, 303 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) }, 304 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) }, 305 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) }, 306 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) }, 307 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) }, 308 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) }, 309 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) }, 310 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) }, 311 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) }, 312 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) }, 313 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) }, 314 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) }, 315 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) }, 316 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) }, 317 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) }, 318 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) }, 319 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) }, 320 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) }, 321 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) }, 322 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) }, 323 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) }, 324 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) }, 325 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) }, 326 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) }, 327 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) }, 328 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) }, 329 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) }, 330 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) }, 331 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) }, 332 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) }, 333 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) }, 334 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) }, 335 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) }, 336 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) }, 337 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) }, 338 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) }, 339 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) }, 340 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) }, 341 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) }, 342 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) }, 343 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) }, 344 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) }, 345 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) }, 346 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) }, 347 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) }, 348 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) }, 349 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) }, 350 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) }, 351 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) }, 352 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) }, 353 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) }, 354 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) }, 355 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) }, 356 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) }, 357 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) }, 358 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) }, 359 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) }, 360 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) }, 361 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) }, 362 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) }, 363 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) }, 364 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) }, 365 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) }, 366 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) }, 367 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) }, 368 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) }, 369 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) }, 370 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) }, 371 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) }, 372 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) }, 373 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) }, 374 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) }, 375 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) }, 376 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) }, 377 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) }, 378 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) }, 379 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) }, 380 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) }, 381 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) }, 382 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) }, 383 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) }, 384 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) }, 385 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) }, 386 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) }, 387 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) }, 388 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) }, 389 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) }, 390 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) }, 391 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) }, 392 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) }, 393 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) }, 394 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) }, 395 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) }, 396 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) }, 397 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) }, 398 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) }, 399 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) }, 400 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) }, 401 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) }, 402 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) }, 403 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) }, 404 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) }, 405 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) }, 406 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) }, 407 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) }, 408 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) }, 409 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) }, 410 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) }, 411 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) }, 412 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) }, 413 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) }, 414 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) }, 415 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) }, 416 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) }, 417 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) }, 418 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) }, 419 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) }, 420 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) }, 421 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) }, 422 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) }, 423 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) }, 424 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) }, 425 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) }, 426 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) }, 427 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) }, 428 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) }, 429 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) }, 430 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) }, 431 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) }, 432 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) }, 433 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) }, 434 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) }, 435 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) }, 436 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) }, 437 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) }, 438 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) }, 439 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) }, 440 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) }, 441 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) }, 442 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) }, 443 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) }, 444 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) }, 445 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) }, 446 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) }, 447 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) }, 448 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) }, 449 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) }, 450 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) }, 451 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) }, 452 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) }, 453 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) }, 454 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) }, 455 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) }, 456 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) }, 457 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) }, 458 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) }, 459 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) }, 460 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) }, 461 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) }, 462 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) }, 463 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) }, 464 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) }, 465 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) }, 466 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) }, 467 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) }, 468 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) }, 469 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) }, 470 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) }, 471 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) }, 472 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) }, 473 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) }, 474 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) }, 475 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, 476 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, 477 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, 478 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) }, 479 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) }, 480 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) }, 481 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) }, 482 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) }, 483 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) }, 484 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) }, 485 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) }, 486 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) }, 487 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) }, 488 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) }, 489 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) }, 490 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) }, 491 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) }, 492 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) }, 493 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) }, 494 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) }, 495 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) }, 496 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) }, 497 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) }, 498 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) }, 499 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) }, 500 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) }, 501 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) }, 502 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) }, 503 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) }, 504 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) }, 505 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) }, 506 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) }, 507 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) }, 508 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) }, 509 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) }, 510 { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) }, 511 { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, 512 { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, 513 { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, 514 { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) }, 515 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, 516 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, 517 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, 518 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) }, 519 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) }, 520 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) }, 521 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) }, 522 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) }, 523 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) }, 524 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) }, 525 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) }, 526 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) }, 527 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) }, 528 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) }, 529 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) }, 530 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) }, 531 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) }, 532 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) }, 533 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) }, 534 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) }, 535 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) }, 536 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) }, 537 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) }, 538 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) }, 539 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) }, 540 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) }, 541 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) }, 542 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) }, 543 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) }, 544 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) }, 545 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) }, 546 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) }, 547 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) }, 548 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) }, 549 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) }, 550 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) }, 551 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) }, 552 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) }, 553 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) }, 554 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) }, 555 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) }, 556 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) }, 557 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) }, 558 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) }, 559 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) }, 560 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) }, 561 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, 562 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) }, 563 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) }, 564 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) }, 565 { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) }, 566 { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, 567 { USB_DEVICE(OCT_VID, OCT_US101_PID) }, 568 { USB_DEVICE(OCT_VID, OCT_DK201_PID) }, 569 { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID), 570 .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk }, 571 { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID), 572 .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk }, 573 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) }, 574 { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, 575 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, 576 { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, 577 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) }, 578 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) }, 579 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) }, 580 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) }, 581 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) }, 582 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) }, 583 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) }, 584 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) }, 585 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) }, 586 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) }, 587 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) }, 588 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) }, 589 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) }, 590 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) }, 591 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) }, 592 { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) }, 593 { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, 594 { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, 595 { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, 596 { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, 597 { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, 598 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, 599 { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) }, 600 { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) }, 601 { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) }, 602 { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) }, 603 { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) }, 604 { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) }, 605 { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, 606 { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, 607 { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, 608 { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), 609 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 610 { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID), 611 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 612 { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) }, 613 { USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) }, 614 { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, 615 { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX_PID) }, 616 { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2_PID) }, 617 { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX2WI_PID) }, 618 { USB_DEVICE(FTDI_VID, FTDI_CUSTOMWARE_MINIPLEX3_PID) }, 619 /* 620 * ELV devices: 621 */ 622 { USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) }, 623 { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, 624 { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, 625 { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, 626 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, 627 { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, 628 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, 629 { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, 630 { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, 631 { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, 632 { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, 633 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, 634 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, 635 { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, 636 { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, 637 { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, 638 { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, 639 { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, 640 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, 641 { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, 642 { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, 643 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, 644 { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, 645 { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, 646 { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, 647 { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, 648 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, 649 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, 650 { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, 651 { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, 652 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, 653 { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, 654 { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, 655 { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, 656 { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, 657 { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, 658 { USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) }, 659 { USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) }, 660 { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, 661 { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, 662 { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, 663 { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, 664 { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, 665 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, 666 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, 667 { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, 668 { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) }, 669 { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) }, 670 { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) }, 671 { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, 672 { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, 673 { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, 674 { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, 675 { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) }, 676 { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, 677 { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, 678 { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, 679 { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, 680 { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, 681 { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, 682 { USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) }, 683 { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, 684 { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, 685 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, 686 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) }, 687 { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) }, 688 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) }, 689 { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) }, 690 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) }, 691 { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) }, 692 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) }, 693 { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) }, 694 { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) }, 695 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) }, 696 { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) }, 697 { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) }, 698 { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) }, 699 { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) }, 700 { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, 701 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, 702 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, 703 { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, 704 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, 705 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, 706 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, 707 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) }, 708 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) }, 709 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) }, 710 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) }, 711 { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, 712 { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) }, 713 { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) }, 714 { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) }, 715 { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) }, 716 { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) }, 717 { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, 718 { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, 719 { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, 720 { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, 721 { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) }, 722 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, 723 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, 724 { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) }, 725 { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) }, 726 { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) }, 727 { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) }, 728 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, 729 { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, 730 { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, 731 { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, 732 { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, 733 { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, 734 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, 735 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, 736 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, 737 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) }, 738 { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) }, 739 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, 740 { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, 741 { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) }, 742 { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) }, 743 { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) }, 744 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) }, 745 { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) }, 746 { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, 747 { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, 748 { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, 749 { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, 750 { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, 751 { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, 752 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, 753 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, 754 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, 755 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, 756 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, 757 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, 758 { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, 759 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, 760 { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, 761 { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, 762 { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, 763 { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, 764 { USB_DEVICE(TESTO_VID, TESTO_1_PID) }, 765 { USB_DEVICE(TESTO_VID, TESTO_3_PID) }, 766 { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, 767 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, 768 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, 769 { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, 770 { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, 771 { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID), 772 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 773 { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID), 774 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 775 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID), 776 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 777 { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID), 778 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 779 { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), 780 .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, 781 { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, 782 { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) }, 783 { USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) }, 784 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) }, 785 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) }, 786 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) }, 787 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) }, 788 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) }, 789 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) }, 790 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) }, 791 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) }, 792 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) }, 793 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) }, 794 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) }, 795 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) }, 796 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) }, 797 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) }, 798 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) }, 799 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) }, 800 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) }, 801 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) }, 802 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) }, 803 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) }, 804 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) }, 805 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) }, 806 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) }, 807 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) }, 808 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) }, 809 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) }, 810 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) }, 811 { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) }, 812 { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, 813 { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, 814 { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, 815 { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, 816 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, 817 { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, 818 { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), 819 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 820 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) }, 821 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) }, 822 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) }, 823 { USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) }, 824 { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), 825 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 826 { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), 827 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 828 { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID), 829 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 830 { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), 831 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 832 { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), 833 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 834 { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), 835 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 836 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, 837 { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) }, 838 { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, 839 840 /* Papouch devices based on FTDI chip */ 841 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) }, 842 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) }, 843 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) }, 844 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) }, 845 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) }, 846 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) }, 847 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) }, 848 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) }, 849 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) }, 850 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) }, 851 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, 852 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) }, 853 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) }, 854 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) }, 855 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, 856 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) }, 857 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) }, 858 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) }, 859 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) }, 860 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) }, 861 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) }, 862 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) }, 863 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) }, 864 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) }, 865 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) }, 866 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, 867 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) }, 868 { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) }, 869 870 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, 871 { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, 872 { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, 873 { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, 874 { USB_DEVICE(ATMEL_VID, STK541_PID) }, 875 { USB_DEVICE(DE_VID, STB_PID) }, 876 { USB_DEVICE(DE_VID, WHT_PID) }, 877 { USB_DEVICE(ADI_VID, ADI_GNICE_PID), 878 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 879 { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), 880 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 881 { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, 882 USB_CLASS_VENDOR_SPEC, 883 USB_SUBCLASS_VENDOR_SPEC, 0x00) }, 884 { USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) }, 885 { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, 886 { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), 887 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 888 { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, 889 { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, 890 { USB_DEVICE(FTDI_VID, PI_C865_PID) }, 891 { USB_DEVICE(FTDI_VID, PI_C857_PID) }, 892 { USB_DEVICE(PI_VID, PI_C866_PID) }, 893 { USB_DEVICE(PI_VID, PI_C663_PID) }, 894 { USB_DEVICE(PI_VID, PI_C725_PID) }, 895 { USB_DEVICE(PI_VID, PI_E517_PID) }, 896 { USB_DEVICE(PI_VID, PI_C863_PID) }, 897 { USB_DEVICE(PI_VID, PI_E861_PID) }, 898 { USB_DEVICE(PI_VID, PI_C867_PID) }, 899 { USB_DEVICE(PI_VID, PI_E609_PID) }, 900 { USB_DEVICE(PI_VID, PI_E709_PID) }, 901 { USB_DEVICE(PI_VID, PI_100F_PID) }, 902 { USB_DEVICE(PI_VID, PI_1011_PID) }, 903 { USB_DEVICE(PI_VID, PI_1012_PID) }, 904 { USB_DEVICE(PI_VID, PI_1013_PID) }, 905 { USB_DEVICE(PI_VID, PI_1014_PID) }, 906 { USB_DEVICE(PI_VID, PI_1015_PID) }, 907 { USB_DEVICE(PI_VID, PI_1016_PID) }, 908 { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, 909 { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, 910 { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), 911 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 912 { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), 913 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 914 { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, 915 { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, 916 { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, 917 { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, 918 { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, 919 { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, 920 { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, 921 { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, 922 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), 923 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 924 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), 925 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 926 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), 927 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 928 { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), 929 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 930 { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, 931 { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) }, 932 { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID), 933 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 934 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) }, 935 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) }, 936 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) }, 937 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) }, 938 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) }, 939 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) }, 940 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) }, 941 { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) }, 942 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, 943 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, 944 { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, 945 { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, 946 { USB_DEVICE(FTDI_VID, FTDI_FHE_PID) }, 947 { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, 948 { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), 949 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 950 { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID), 951 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 952 { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID), 953 .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, 954 { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, 955 { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), 956 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 957 { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, 958 /* Crucible Devices */ 959 { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, 960 { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, 961 /* Cressi Devices */ 962 { USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) }, 963 /* Brainboxes Devices */ 964 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) }, 965 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) }, 966 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) }, 967 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) }, 968 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) }, 969 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) }, 970 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) }, 971 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) }, 972 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) }, 973 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) }, 974 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) }, 975 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) }, 976 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) }, 977 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) }, 978 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) }, 979 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) }, 980 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) }, 981 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) }, 982 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) }, 983 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) }, 984 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) }, 985 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) }, 986 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) }, 987 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) }, 988 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) }, 989 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) }, 990 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) }, 991 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) }, 992 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) }, 993 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, 994 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, 995 { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, 996 /* ekey Devices */ 997 { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) }, 998 /* Infineon Devices */ 999 { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) }, 1000 { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) }, 1001 /* GE Healthcare devices */ 1002 { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, 1003 /* Active Research (Actisense) devices */ 1004 { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) }, 1005 { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, 1006 { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, 1007 { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, 1008 { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, 1009 { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, 1010 { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, 1011 { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, 1012 { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, 1013 { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, 1014 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) }, 1015 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) }, 1016 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) }, 1017 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, 1018 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, 1019 { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, 1020 /* ICP DAS I-756xU devices */ 1021 { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, 1022 { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) }, 1023 { USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) }, 1024 { USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) }, 1025 { USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID), 1026 .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, 1027 { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) }, 1028 { USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) }, 1029 { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, 1030 /* EZPrototypes devices */ 1031 { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) }, 1032 { USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) }, 1033 /* Sienna devices */ 1034 { USB_DEVICE(FTDI_VID, FTDI_SIENNA_PID) }, 1035 { USB_DEVICE(ECHELON_VID, ECHELON_U20_PID) }, 1036 /* U-Blox devices */ 1037 { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ZED_PID) }, 1038 { USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) }, 1039 { } /* Terminating entry */ 1040 }; 1041 1042 MODULE_DEVICE_TABLE(usb, id_table_combined); 1043 1044 static const char *ftdi_chip_name[] = { 1045 [SIO] = "SIO", /* the serial part of FT8U100AX */ 1046 [FT8U232AM] = "FT8U232AM", 1047 [FT232BM] = "FT232BM", 1048 [FT2232C] = "FT2232C", 1049 [FT232RL] = "FT232RL", 1050 [FT2232H] = "FT2232H", 1051 [FT4232H] = "FT4232H", 1052 [FT232H] = "FT232H", 1053 [FTX] = "FT-X" 1054 }; 1055 1056 1057 /* Used for TIOCMIWAIT */ 1058 #define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) 1059 #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) 1060 /* End TIOCMIWAIT */ 1061 1062 /* function prototypes for a FTDI serial converter */ 1063 static int ftdi_sio_probe(struct usb_serial *serial, 1064 const struct usb_device_id *id); 1065 static int ftdi_sio_port_probe(struct usb_serial_port *port); 1066 static int ftdi_sio_port_remove(struct usb_serial_port *port); 1067 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); 1068 static void ftdi_dtr_rts(struct usb_serial_port *port, int on); 1069 static void ftdi_process_read_urb(struct urb *urb); 1070 static int ftdi_prepare_write_buffer(struct usb_serial_port *port, 1071 void *dest, size_t size); 1072 static void ftdi_set_termios(struct tty_struct *tty, 1073 struct usb_serial_port *port, struct ktermios *old); 1074 static int ftdi_tiocmget(struct tty_struct *tty); 1075 static int ftdi_tiocmset(struct tty_struct *tty, 1076 unsigned int set, unsigned int clear); 1077 static int ftdi_ioctl(struct tty_struct *tty, 1078 unsigned int cmd, unsigned long arg); 1079 static int get_serial_info(struct tty_struct *tty, 1080 struct serial_struct *ss); 1081 static int set_serial_info(struct tty_struct *tty, 1082 struct serial_struct *ss); 1083 static void ftdi_break_ctl(struct tty_struct *tty, int break_state); 1084 static bool ftdi_tx_empty(struct usb_serial_port *port); 1085 static int ftdi_get_modem_status(struct usb_serial_port *port, 1086 unsigned char status[2]); 1087 1088 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); 1089 static unsigned short int ftdi_232am_baud_to_divisor(int baud); 1090 static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); 1091 static u32 ftdi_232bm_baud_to_divisor(int baud); 1092 static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); 1093 static u32 ftdi_2232h_baud_to_divisor(int baud); 1094 1095 static struct usb_serial_driver ftdi_sio_device = { 1096 .driver = { 1097 .owner = THIS_MODULE, 1098 .name = "ftdi_sio", 1099 }, 1100 .description = "FTDI USB Serial Device", 1101 .id_table = id_table_combined, 1102 .num_ports = 1, 1103 .bulk_in_size = 512, 1104 .bulk_out_size = 256, 1105 .probe = ftdi_sio_probe, 1106 .port_probe = ftdi_sio_port_probe, 1107 .port_remove = ftdi_sio_port_remove, 1108 .open = ftdi_open, 1109 .dtr_rts = ftdi_dtr_rts, 1110 .throttle = usb_serial_generic_throttle, 1111 .unthrottle = usb_serial_generic_unthrottle, 1112 .process_read_urb = ftdi_process_read_urb, 1113 .prepare_write_buffer = ftdi_prepare_write_buffer, 1114 .tiocmget = ftdi_tiocmget, 1115 .tiocmset = ftdi_tiocmset, 1116 .tiocmiwait = usb_serial_generic_tiocmiwait, 1117 .get_icount = usb_serial_generic_get_icount, 1118 .ioctl = ftdi_ioctl, 1119 .get_serial = get_serial_info, 1120 .set_serial = set_serial_info, 1121 .set_termios = ftdi_set_termios, 1122 .break_ctl = ftdi_break_ctl, 1123 .tx_empty = ftdi_tx_empty, 1124 }; 1125 1126 static struct usb_serial_driver * const serial_drivers[] = { 1127 &ftdi_sio_device, NULL 1128 }; 1129 1130 1131 #define WDR_TIMEOUT 5000 /* default urb timeout */ 1132 #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ 1133 1134 /* 1135 * *************************************************************************** 1136 * Utility functions 1137 * *************************************************************************** 1138 */ 1139 1140 static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) 1141 { 1142 unsigned short int divisor; 1143 /* divisor shifted 3 bits to the left */ 1144 int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); 1145 if ((divisor3 & 0x7) == 7) 1146 divisor3++; /* round x.7/8 up to x+1 */ 1147 divisor = divisor3 >> 3; 1148 divisor3 &= 0x7; 1149 if (divisor3 == 1) 1150 divisor |= 0xc000; 1151 else if (divisor3 >= 4) 1152 divisor |= 0x4000; 1153 else if (divisor3 != 0) 1154 divisor |= 0x8000; 1155 else if (divisor == 1) 1156 divisor = 0; /* special case for maximum baud rate */ 1157 return divisor; 1158 } 1159 1160 static unsigned short int ftdi_232am_baud_to_divisor(int baud) 1161 { 1162 return ftdi_232am_baud_base_to_divisor(baud, 48000000); 1163 } 1164 1165 static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) 1166 { 1167 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; 1168 u32 divisor; 1169 /* divisor shifted 3 bits to the left */ 1170 int divisor3 = DIV_ROUND_CLOSEST(base, 2 * baud); 1171 divisor = divisor3 >> 3; 1172 divisor |= (u32)divfrac[divisor3 & 0x7] << 14; 1173 /* Deal with special cases for highest baud rates. */ 1174 if (divisor == 1) 1175 divisor = 0; 1176 else if (divisor == 0x4001) 1177 divisor = 1; 1178 return divisor; 1179 } 1180 1181 static u32 ftdi_232bm_baud_to_divisor(int baud) 1182 { 1183 return ftdi_232bm_baud_base_to_divisor(baud, 48000000); 1184 } 1185 1186 static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) 1187 { 1188 static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; 1189 u32 divisor; 1190 int divisor3; 1191 1192 /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ 1193 divisor3 = DIV_ROUND_CLOSEST(8 * base, 10 * baud); 1194 1195 divisor = divisor3 >> 3; 1196 divisor |= (u32)divfrac[divisor3 & 0x7] << 14; 1197 /* Deal with special cases for highest baud rates. */ 1198 if (divisor == 1) 1199 divisor = 0; 1200 else if (divisor == 0x4001) 1201 divisor = 1; 1202 /* 1203 * Set this bit to turn off a divide by 2.5 on baud rate generator 1204 * This enables baud rates up to 12Mbaud but cannot reach below 1200 1205 * baud with this bit set 1206 */ 1207 divisor |= 0x00020000; 1208 return divisor; 1209 } 1210 1211 static u32 ftdi_2232h_baud_to_divisor(int baud) 1212 { 1213 return ftdi_2232h_baud_base_to_divisor(baud, 120000000); 1214 } 1215 1216 #define set_mctrl(port, set) update_mctrl((port), (set), 0) 1217 #define clear_mctrl(port, clear) update_mctrl((port), 0, (clear)) 1218 1219 static int update_mctrl(struct usb_serial_port *port, unsigned int set, 1220 unsigned int clear) 1221 { 1222 struct ftdi_private *priv = usb_get_serial_port_data(port); 1223 struct device *dev = &port->dev; 1224 unsigned value; 1225 int rv; 1226 1227 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { 1228 dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__); 1229 return 0; /* no change */ 1230 } 1231 1232 clear &= ~set; /* 'set' takes precedence over 'clear' */ 1233 value = 0; 1234 if (clear & TIOCM_DTR) 1235 value |= FTDI_SIO_SET_DTR_LOW; 1236 if (clear & TIOCM_RTS) 1237 value |= FTDI_SIO_SET_RTS_LOW; 1238 if (set & TIOCM_DTR) 1239 value |= FTDI_SIO_SET_DTR_HIGH; 1240 if (set & TIOCM_RTS) 1241 value |= FTDI_SIO_SET_RTS_HIGH; 1242 rv = usb_control_msg(port->serial->dev, 1243 usb_sndctrlpipe(port->serial->dev, 0), 1244 FTDI_SIO_SET_MODEM_CTRL_REQUEST, 1245 FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, 1246 value, priv->interface, 1247 NULL, 0, WDR_TIMEOUT); 1248 if (rv < 0) { 1249 dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", 1250 __func__, 1251 (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", 1252 (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); 1253 rv = usb_translate_errors(rv); 1254 } else { 1255 dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, 1256 (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", 1257 (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); 1258 /* FIXME: locking on last_dtr_rts */ 1259 priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set; 1260 } 1261 return rv; 1262 } 1263 1264 1265 static u32 get_ftdi_divisor(struct tty_struct *tty, 1266 struct usb_serial_port *port) 1267 { 1268 struct ftdi_private *priv = usb_get_serial_port_data(port); 1269 struct device *dev = &port->dev; 1270 u32 div_value = 0; 1271 int div_okay = 1; 1272 int baud; 1273 1274 baud = tty_get_baud_rate(tty); 1275 dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); 1276 1277 /* 1278 * Observe deprecated async-compatible custom_divisor hack, update 1279 * baudrate if needed. 1280 */ 1281 if (baud == 38400 && 1282 ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && 1283 (priv->custom_divisor)) { 1284 baud = priv->baud_base / priv->custom_divisor; 1285 dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n", 1286 __func__, priv->custom_divisor, baud); 1287 } 1288 1289 if (!baud) 1290 baud = 9600; 1291 switch (priv->chip_type) { 1292 case SIO: /* SIO chip */ 1293 switch (baud) { 1294 case 300: div_value = ftdi_sio_b300; break; 1295 case 600: div_value = ftdi_sio_b600; break; 1296 case 1200: div_value = ftdi_sio_b1200; break; 1297 case 2400: div_value = ftdi_sio_b2400; break; 1298 case 4800: div_value = ftdi_sio_b4800; break; 1299 case 9600: div_value = ftdi_sio_b9600; break; 1300 case 19200: div_value = ftdi_sio_b19200; break; 1301 case 38400: div_value = ftdi_sio_b38400; break; 1302 case 57600: div_value = ftdi_sio_b57600; break; 1303 case 115200: div_value = ftdi_sio_b115200; break; 1304 } /* baud */ 1305 if (div_value == 0) { 1306 dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", 1307 __func__, baud); 1308 div_value = ftdi_sio_b9600; 1309 baud = 9600; 1310 div_okay = 0; 1311 } 1312 break; 1313 case FT8U232AM: /* 8U232AM chip */ 1314 if (baud <= 3000000) { 1315 div_value = ftdi_232am_baud_to_divisor(baud); 1316 } else { 1317 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1318 baud = 9600; 1319 div_value = ftdi_232am_baud_to_divisor(9600); 1320 div_okay = 0; 1321 } 1322 break; 1323 case FT232BM: /* FT232BM chip */ 1324 case FT2232C: /* FT2232C chip */ 1325 case FT232RL: /* FT232RL chip */ 1326 case FTX: /* FT-X series */ 1327 if (baud <= 3000000) { 1328 u16 product_id = le16_to_cpu( 1329 port->serial->dev->descriptor.idProduct); 1330 if (((product_id == FTDI_NDI_HUC_PID) || 1331 (product_id == FTDI_NDI_SPECTRA_SCU_PID) || 1332 (product_id == FTDI_NDI_FUTURE_2_PID) || 1333 (product_id == FTDI_NDI_FUTURE_3_PID) || 1334 (product_id == FTDI_NDI_AURORA_SCU_PID)) && 1335 (baud == 19200)) { 1336 baud = 1200000; 1337 } 1338 div_value = ftdi_232bm_baud_to_divisor(baud); 1339 } else { 1340 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1341 div_value = ftdi_232bm_baud_to_divisor(9600); 1342 div_okay = 0; 1343 baud = 9600; 1344 } 1345 break; 1346 case FT2232H: /* FT2232H chip */ 1347 case FT4232H: /* FT4232H chip */ 1348 case FT232H: /* FT232H chip */ 1349 if ((baud <= 12000000) && (baud >= 1200)) { 1350 div_value = ftdi_2232h_baud_to_divisor(baud); 1351 } else if (baud < 1200) { 1352 div_value = ftdi_232bm_baud_to_divisor(baud); 1353 } else { 1354 dev_dbg(dev, "%s - Baud rate too high!\n", __func__); 1355 div_value = ftdi_232bm_baud_to_divisor(9600); 1356 div_okay = 0; 1357 baud = 9600; 1358 } 1359 break; 1360 } /* priv->chip_type */ 1361 1362 if (div_okay) { 1363 dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", 1364 __func__, baud, (unsigned long)div_value, 1365 ftdi_chip_name[priv->chip_type]); 1366 } 1367 1368 tty_encode_baud_rate(tty, baud, baud); 1369 return div_value; 1370 } 1371 1372 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) 1373 { 1374 struct ftdi_private *priv = usb_get_serial_port_data(port); 1375 u16 value; 1376 u16 index; 1377 u32 index_value; 1378 int rv; 1379 1380 index_value = get_ftdi_divisor(tty, port); 1381 value = (u16)index_value; 1382 index = (u16)(index_value >> 16); 1383 if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || 1384 (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { 1385 /* Probably the BM type needs the MSB of the encoded fractional 1386 * divider also moved like for the chips above. Any infos? */ 1387 index = (u16)((index << 8) | priv->interface); 1388 } 1389 1390 rv = usb_control_msg(port->serial->dev, 1391 usb_sndctrlpipe(port->serial->dev, 0), 1392 FTDI_SIO_SET_BAUDRATE_REQUEST, 1393 FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, 1394 value, index, 1395 NULL, 0, WDR_SHORT_TIMEOUT); 1396 return rv; 1397 } 1398 1399 static int write_latency_timer(struct usb_serial_port *port) 1400 { 1401 struct ftdi_private *priv = usb_get_serial_port_data(port); 1402 struct usb_device *udev = port->serial->dev; 1403 int rv; 1404 int l = priv->latency; 1405 1406 if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) 1407 return -EINVAL; 1408 1409 if (priv->flags & ASYNC_LOW_LATENCY) 1410 l = 1; 1411 1412 dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l); 1413 1414 rv = usb_control_msg(udev, 1415 usb_sndctrlpipe(udev, 0), 1416 FTDI_SIO_SET_LATENCY_TIMER_REQUEST, 1417 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, 1418 l, priv->interface, 1419 NULL, 0, WDR_TIMEOUT); 1420 if (rv < 0) 1421 dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); 1422 return rv; 1423 } 1424 1425 static int _read_latency_timer(struct usb_serial_port *port) 1426 { 1427 struct ftdi_private *priv = usb_get_serial_port_data(port); 1428 struct usb_device *udev = port->serial->dev; 1429 unsigned char *buf; 1430 int rv; 1431 1432 buf = kmalloc(1, GFP_KERNEL); 1433 if (!buf) 1434 return -ENOMEM; 1435 1436 rv = usb_control_msg(udev, 1437 usb_rcvctrlpipe(udev, 0), 1438 FTDI_SIO_GET_LATENCY_TIMER_REQUEST, 1439 FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 1440 0, priv->interface, 1441 buf, 1, WDR_TIMEOUT); 1442 if (rv < 1) { 1443 if (rv >= 0) 1444 rv = -EIO; 1445 } else { 1446 rv = buf[0]; 1447 } 1448 1449 kfree(buf); 1450 1451 return rv; 1452 } 1453 1454 static int read_latency_timer(struct usb_serial_port *port) 1455 { 1456 struct ftdi_private *priv = usb_get_serial_port_data(port); 1457 int rv; 1458 1459 if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) 1460 return -EINVAL; 1461 1462 rv = _read_latency_timer(port); 1463 if (rv < 0) { 1464 dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); 1465 return rv; 1466 } 1467 1468 priv->latency = rv; 1469 1470 return 0; 1471 } 1472 1473 static int get_serial_info(struct tty_struct *tty, 1474 struct serial_struct *ss) 1475 { 1476 struct usb_serial_port *port = tty->driver_data; 1477 struct ftdi_private *priv = usb_get_serial_port_data(port); 1478 1479 ss->flags = priv->flags; 1480 ss->baud_base = priv->baud_base; 1481 ss->custom_divisor = priv->custom_divisor; 1482 return 0; 1483 } 1484 1485 static int set_serial_info(struct tty_struct *tty, 1486 struct serial_struct *ss) 1487 { 1488 struct usb_serial_port *port = tty->driver_data; 1489 struct ftdi_private *priv = usb_get_serial_port_data(port); 1490 struct ftdi_private old_priv; 1491 1492 mutex_lock(&priv->cfg_lock); 1493 old_priv = *priv; 1494 1495 /* Do error checking and permission checking */ 1496 1497 if (!capable(CAP_SYS_ADMIN)) { 1498 if ((ss->flags ^ priv->flags) & ~ASYNC_USR_MASK) { 1499 mutex_unlock(&priv->cfg_lock); 1500 return -EPERM; 1501 } 1502 priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | 1503 (ss->flags & ASYNC_USR_MASK)); 1504 priv->custom_divisor = ss->custom_divisor; 1505 goto check_and_exit; 1506 } 1507 1508 if (ss->baud_base != priv->baud_base) { 1509 mutex_unlock(&priv->cfg_lock); 1510 return -EINVAL; 1511 } 1512 1513 /* Make the changes - these are privileged changes! */ 1514 1515 priv->flags = ((priv->flags & ~ASYNC_FLAGS) | 1516 (ss->flags & ASYNC_FLAGS)); 1517 priv->custom_divisor = ss->custom_divisor; 1518 1519 check_and_exit: 1520 write_latency_timer(port); 1521 1522 if ((priv->flags ^ old_priv.flags) & ASYNC_SPD_MASK || 1523 ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && 1524 priv->custom_divisor != old_priv.custom_divisor)) { 1525 1526 /* warn about deprecation unless clearing */ 1527 if (priv->flags & ASYNC_SPD_MASK) 1528 dev_warn_ratelimited(&port->dev, "use of SPD flags is deprecated\n"); 1529 1530 change_speed(tty, port); 1531 } 1532 mutex_unlock(&priv->cfg_lock); 1533 return 0; 1534 } 1535 1536 static int get_lsr_info(struct usb_serial_port *port, 1537 unsigned int __user *retinfo) 1538 { 1539 struct ftdi_private *priv = usb_get_serial_port_data(port); 1540 unsigned int result = 0; 1541 1542 if (priv->transmit_empty) 1543 result = TIOCSER_TEMT; 1544 1545 if (copy_to_user(retinfo, &result, sizeof(unsigned int))) 1546 return -EFAULT; 1547 return 0; 1548 } 1549 1550 1551 /* Determine type of FTDI chip based on USB config and descriptor. */ 1552 static void ftdi_determine_type(struct usb_serial_port *port) 1553 { 1554 struct ftdi_private *priv = usb_get_serial_port_data(port); 1555 struct usb_serial *serial = port->serial; 1556 struct usb_device *udev = serial->dev; 1557 unsigned version; 1558 unsigned interfaces; 1559 1560 /* Assume it is not the original SIO device for now. */ 1561 priv->baud_base = 48000000 / 2; 1562 1563 version = le16_to_cpu(udev->descriptor.bcdDevice); 1564 interfaces = udev->actconfig->desc.bNumInterfaces; 1565 dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, 1566 version, interfaces); 1567 if (interfaces > 1) { 1568 int inter; 1569 1570 /* Multiple interfaces.*/ 1571 if (version == 0x0800) { 1572 priv->chip_type = FT4232H; 1573 /* Hi-speed - baud clock runs at 120MHz */ 1574 priv->baud_base = 120000000 / 2; 1575 } else if (version == 0x0700) { 1576 priv->chip_type = FT2232H; 1577 /* Hi-speed - baud clock runs at 120MHz */ 1578 priv->baud_base = 120000000 / 2; 1579 } else 1580 priv->chip_type = FT2232C; 1581 1582 /* Determine interface code. */ 1583 inter = serial->interface->altsetting->desc.bInterfaceNumber; 1584 if (inter == 0) { 1585 priv->interface = INTERFACE_A; 1586 } else if (inter == 1) { 1587 priv->interface = INTERFACE_B; 1588 } else if (inter == 2) { 1589 priv->interface = INTERFACE_C; 1590 } else if (inter == 3) { 1591 priv->interface = INTERFACE_D; 1592 } 1593 /* BM-type devices have a bug where bcdDevice gets set 1594 * to 0x200 when iSerialNumber is 0. */ 1595 if (version < 0x500) { 1596 dev_dbg(&port->dev, 1597 "%s: something fishy - bcdDevice too low for multi-interface device\n", 1598 __func__); 1599 } 1600 } else if (version < 0x200) { 1601 /* Old device. Assume it's the original SIO. */ 1602 priv->chip_type = SIO; 1603 priv->baud_base = 12000000 / 16; 1604 } else if (version < 0x400) { 1605 /* Assume it's an FT8U232AM (or FT8U245AM) */ 1606 priv->chip_type = FT8U232AM; 1607 /* 1608 * It might be a BM type because of the iSerialNumber bug. 1609 * If iSerialNumber==0 and the latency timer is readable, 1610 * assume it is BM type. 1611 */ 1612 if (udev->descriptor.iSerialNumber == 0 && 1613 _read_latency_timer(port) >= 0) { 1614 dev_dbg(&port->dev, 1615 "%s: has latency timer so not an AM type\n", 1616 __func__); 1617 priv->chip_type = FT232BM; 1618 } 1619 } else if (version < 0x600) { 1620 /* Assume it's an FT232BM (or FT245BM) */ 1621 priv->chip_type = FT232BM; 1622 } else if (version < 0x900) { 1623 /* Assume it's an FT232RL */ 1624 priv->chip_type = FT232RL; 1625 } else if (version < 0x1000) { 1626 /* Assume it's an FT232H */ 1627 priv->chip_type = FT232H; 1628 } else { 1629 /* Assume it's an FT-X series device */ 1630 priv->chip_type = FTX; 1631 } 1632 1633 dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); 1634 } 1635 1636 1637 /* 1638 * Determine the maximum packet size for the device. This depends on the chip 1639 * type and the USB host capabilities. The value should be obtained from the 1640 * device descriptor as the chip will use the appropriate values for the host. 1641 */ 1642 static void ftdi_set_max_packet_size(struct usb_serial_port *port) 1643 { 1644 struct ftdi_private *priv = usb_get_serial_port_data(port); 1645 struct usb_interface *interface = port->serial->interface; 1646 struct usb_endpoint_descriptor *ep_desc; 1647 unsigned num_endpoints; 1648 unsigned i; 1649 1650 num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; 1651 if (!num_endpoints) 1652 return; 1653 1654 /* 1655 * NOTE: Some customers have programmed FT232R/FT245R devices 1656 * with an endpoint size of 0 - not good. In this case, we 1657 * want to override the endpoint descriptor setting and use a 1658 * value of 64 for wMaxPacketSize. 1659 */ 1660 for (i = 0; i < num_endpoints; i++) { 1661 ep_desc = &interface->cur_altsetting->endpoint[i].desc; 1662 if (!ep_desc->wMaxPacketSize) { 1663 ep_desc->wMaxPacketSize = cpu_to_le16(0x40); 1664 dev_warn(&port->dev, "Overriding wMaxPacketSize on endpoint %d\n", 1665 usb_endpoint_num(ep_desc)); 1666 } 1667 } 1668 1669 /* Set max packet size based on last descriptor. */ 1670 priv->max_packet_size = usb_endpoint_maxp(ep_desc); 1671 } 1672 1673 1674 /* 1675 * *************************************************************************** 1676 * Sysfs Attribute 1677 * *************************************************************************** 1678 */ 1679 1680 static ssize_t latency_timer_show(struct device *dev, 1681 struct device_attribute *attr, char *buf) 1682 { 1683 struct usb_serial_port *port = to_usb_serial_port(dev); 1684 struct ftdi_private *priv = usb_get_serial_port_data(port); 1685 if (priv->flags & ASYNC_LOW_LATENCY) 1686 return sprintf(buf, "1\n"); 1687 else 1688 return sprintf(buf, "%i\n", priv->latency); 1689 } 1690 1691 /* Write a new value of the latency timer, in units of milliseconds. */ 1692 static ssize_t latency_timer_store(struct device *dev, 1693 struct device_attribute *attr, 1694 const char *valbuf, size_t count) 1695 { 1696 struct usb_serial_port *port = to_usb_serial_port(dev); 1697 struct ftdi_private *priv = usb_get_serial_port_data(port); 1698 u8 v; 1699 int rv; 1700 1701 if (kstrtou8(valbuf, 10, &v)) 1702 return -EINVAL; 1703 1704 priv->latency = v; 1705 rv = write_latency_timer(port); 1706 if (rv < 0) 1707 return -EIO; 1708 return count; 1709 } 1710 static DEVICE_ATTR_RW(latency_timer); 1711 1712 /* Write an event character directly to the FTDI register. The ASCII 1713 value is in the low 8 bits, with the enable bit in the 9th bit. */ 1714 static ssize_t event_char_store(struct device *dev, 1715 struct device_attribute *attr, const char *valbuf, size_t count) 1716 { 1717 struct usb_serial_port *port = to_usb_serial_port(dev); 1718 struct ftdi_private *priv = usb_get_serial_port_data(port); 1719 struct usb_device *udev = port->serial->dev; 1720 unsigned int v; 1721 int rv; 1722 1723 if (kstrtouint(valbuf, 0, &v) || v >= 0x200) 1724 return -EINVAL; 1725 1726 dev_dbg(&port->dev, "%s: setting event char = 0x%03x\n", __func__, v); 1727 1728 rv = usb_control_msg(udev, 1729 usb_sndctrlpipe(udev, 0), 1730 FTDI_SIO_SET_EVENT_CHAR_REQUEST, 1731 FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, 1732 v, priv->interface, 1733 NULL, 0, WDR_TIMEOUT); 1734 if (rv < 0) { 1735 dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); 1736 return -EIO; 1737 } 1738 1739 return count; 1740 } 1741 static DEVICE_ATTR_WO(event_char); 1742 1743 static int create_sysfs_attrs(struct usb_serial_port *port) 1744 { 1745 struct ftdi_private *priv = usb_get_serial_port_data(port); 1746 int retval = 0; 1747 1748 /* XXX I've no idea if the original SIO supports the event_char 1749 * sysfs parameter, so I'm playing it safe. */ 1750 if (priv->chip_type != SIO) { 1751 dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); 1752 retval = device_create_file(&port->dev, &dev_attr_event_char); 1753 if ((!retval) && 1754 (priv->chip_type == FT232BM || 1755 priv->chip_type == FT2232C || 1756 priv->chip_type == FT232RL || 1757 priv->chip_type == FT2232H || 1758 priv->chip_type == FT4232H || 1759 priv->chip_type == FT232H || 1760 priv->chip_type == FTX)) { 1761 retval = device_create_file(&port->dev, 1762 &dev_attr_latency_timer); 1763 } 1764 } 1765 return retval; 1766 } 1767 1768 static void remove_sysfs_attrs(struct usb_serial_port *port) 1769 { 1770 struct ftdi_private *priv = usb_get_serial_port_data(port); 1771 1772 /* XXX see create_sysfs_attrs */ 1773 if (priv->chip_type != SIO) { 1774 device_remove_file(&port->dev, &dev_attr_event_char); 1775 if (priv->chip_type == FT232BM || 1776 priv->chip_type == FT2232C || 1777 priv->chip_type == FT232RL || 1778 priv->chip_type == FT2232H || 1779 priv->chip_type == FT4232H || 1780 priv->chip_type == FT232H || 1781 priv->chip_type == FTX) { 1782 device_remove_file(&port->dev, &dev_attr_latency_timer); 1783 } 1784 } 1785 1786 } 1787 1788 #ifdef CONFIG_GPIOLIB 1789 1790 static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) 1791 { 1792 struct ftdi_private *priv = usb_get_serial_port_data(port); 1793 struct usb_serial *serial = port->serial; 1794 int result; 1795 u16 val; 1796 1797 result = usb_autopm_get_interface(serial->interface); 1798 if (result) 1799 return result; 1800 1801 val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value; 1802 result = usb_control_msg(serial->dev, 1803 usb_sndctrlpipe(serial->dev, 0), 1804 FTDI_SIO_SET_BITMODE_REQUEST, 1805 FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val, 1806 priv->interface, NULL, 0, WDR_TIMEOUT); 1807 if (result < 0) { 1808 dev_err(&serial->interface->dev, 1809 "bitmode request failed for value 0x%04x: %d\n", 1810 val, result); 1811 } 1812 1813 usb_autopm_put_interface(serial->interface); 1814 1815 return result; 1816 } 1817 1818 static int ftdi_set_cbus_pins(struct usb_serial_port *port) 1819 { 1820 return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_CBUS); 1821 } 1822 1823 static int ftdi_exit_cbus_mode(struct usb_serial_port *port) 1824 { 1825 struct ftdi_private *priv = usb_get_serial_port_data(port); 1826 1827 priv->gpio_output = 0; 1828 priv->gpio_value = 0; 1829 return ftdi_set_bitmode(port, FTDI_SIO_BITMODE_RESET); 1830 } 1831 1832 static int ftdi_gpio_request(struct gpio_chip *gc, unsigned int offset) 1833 { 1834 struct usb_serial_port *port = gpiochip_get_data(gc); 1835 struct ftdi_private *priv = usb_get_serial_port_data(port); 1836 int result; 1837 1838 if (priv->gpio_altfunc & BIT(offset)) 1839 return -ENODEV; 1840 1841 mutex_lock(&priv->gpio_lock); 1842 if (!priv->gpio_used) { 1843 /* Set default pin states, as we cannot get them from device */ 1844 priv->gpio_output = 0x00; 1845 priv->gpio_value = 0x00; 1846 result = ftdi_set_cbus_pins(port); 1847 if (result) { 1848 mutex_unlock(&priv->gpio_lock); 1849 return result; 1850 } 1851 1852 priv->gpio_used = true; 1853 } 1854 mutex_unlock(&priv->gpio_lock); 1855 1856 return 0; 1857 } 1858 1859 static int ftdi_read_cbus_pins(struct usb_serial_port *port) 1860 { 1861 struct ftdi_private *priv = usb_get_serial_port_data(port); 1862 struct usb_serial *serial = port->serial; 1863 unsigned char *buf; 1864 int result; 1865 1866 result = usb_autopm_get_interface(serial->interface); 1867 if (result) 1868 return result; 1869 1870 buf = kmalloc(1, GFP_KERNEL); 1871 if (!buf) { 1872 usb_autopm_put_interface(serial->interface); 1873 return -ENOMEM; 1874 } 1875 1876 result = usb_control_msg(serial->dev, 1877 usb_rcvctrlpipe(serial->dev, 0), 1878 FTDI_SIO_READ_PINS_REQUEST, 1879 FTDI_SIO_READ_PINS_REQUEST_TYPE, 0, 1880 priv->interface, buf, 1, WDR_TIMEOUT); 1881 if (result < 1) { 1882 if (result >= 0) 1883 result = -EIO; 1884 } else { 1885 result = buf[0]; 1886 } 1887 1888 kfree(buf); 1889 usb_autopm_put_interface(serial->interface); 1890 1891 return result; 1892 } 1893 1894 static int ftdi_gpio_get(struct gpio_chip *gc, unsigned int gpio) 1895 { 1896 struct usb_serial_port *port = gpiochip_get_data(gc); 1897 int result; 1898 1899 result = ftdi_read_cbus_pins(port); 1900 if (result < 0) 1901 return result; 1902 1903 return !!(result & BIT(gpio)); 1904 } 1905 1906 static void ftdi_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value) 1907 { 1908 struct usb_serial_port *port = gpiochip_get_data(gc); 1909 struct ftdi_private *priv = usb_get_serial_port_data(port); 1910 1911 mutex_lock(&priv->gpio_lock); 1912 1913 if (value) 1914 priv->gpio_value |= BIT(gpio); 1915 else 1916 priv->gpio_value &= ~BIT(gpio); 1917 1918 ftdi_set_cbus_pins(port); 1919 1920 mutex_unlock(&priv->gpio_lock); 1921 } 1922 1923 static int ftdi_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, 1924 unsigned long *bits) 1925 { 1926 struct usb_serial_port *port = gpiochip_get_data(gc); 1927 int result; 1928 1929 result = ftdi_read_cbus_pins(port); 1930 if (result < 0) 1931 return result; 1932 1933 *bits = result & *mask; 1934 1935 return 0; 1936 } 1937 1938 static void ftdi_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, 1939 unsigned long *bits) 1940 { 1941 struct usb_serial_port *port = gpiochip_get_data(gc); 1942 struct ftdi_private *priv = usb_get_serial_port_data(port); 1943 1944 mutex_lock(&priv->gpio_lock); 1945 1946 priv->gpio_value &= ~(*mask); 1947 priv->gpio_value |= *bits & *mask; 1948 ftdi_set_cbus_pins(port); 1949 1950 mutex_unlock(&priv->gpio_lock); 1951 } 1952 1953 static int ftdi_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio) 1954 { 1955 struct usb_serial_port *port = gpiochip_get_data(gc); 1956 struct ftdi_private *priv = usb_get_serial_port_data(port); 1957 1958 return !(priv->gpio_output & BIT(gpio)); 1959 } 1960 1961 static int ftdi_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio) 1962 { 1963 struct usb_serial_port *port = gpiochip_get_data(gc); 1964 struct ftdi_private *priv = usb_get_serial_port_data(port); 1965 int result; 1966 1967 mutex_lock(&priv->gpio_lock); 1968 1969 priv->gpio_output &= ~BIT(gpio); 1970 result = ftdi_set_cbus_pins(port); 1971 1972 mutex_unlock(&priv->gpio_lock); 1973 1974 return result; 1975 } 1976 1977 static int ftdi_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio, 1978 int value) 1979 { 1980 struct usb_serial_port *port = gpiochip_get_data(gc); 1981 struct ftdi_private *priv = usb_get_serial_port_data(port); 1982 int result; 1983 1984 mutex_lock(&priv->gpio_lock); 1985 1986 priv->gpio_output |= BIT(gpio); 1987 if (value) 1988 priv->gpio_value |= BIT(gpio); 1989 else 1990 priv->gpio_value &= ~BIT(gpio); 1991 1992 result = ftdi_set_cbus_pins(port); 1993 1994 mutex_unlock(&priv->gpio_lock); 1995 1996 return result; 1997 } 1998 1999 static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr, 2000 u16 nbytes) 2001 { 2002 int read = 0; 2003 2004 if (addr % 2 != 0) 2005 return -EINVAL; 2006 if (nbytes % 2 != 0) 2007 return -EINVAL; 2008 2009 /* Read EEPROM two bytes at a time */ 2010 while (read < nbytes) { 2011 int rv; 2012 2013 rv = usb_control_msg(serial->dev, 2014 usb_rcvctrlpipe(serial->dev, 0), 2015 FTDI_SIO_READ_EEPROM_REQUEST, 2016 FTDI_SIO_READ_EEPROM_REQUEST_TYPE, 2017 0, (addr + read) / 2, dst + read, 2, 2018 WDR_TIMEOUT); 2019 if (rv < 2) { 2020 if (rv >= 0) 2021 return -EIO; 2022 else 2023 return rv; 2024 } 2025 2026 read += rv; 2027 } 2028 2029 return 0; 2030 } 2031 2032 static int ftdi_gpio_init_ft232h(struct usb_serial_port *port) 2033 { 2034 struct ftdi_private *priv = usb_get_serial_port_data(port); 2035 u16 cbus_config; 2036 u8 *buf; 2037 int ret; 2038 int i; 2039 2040 buf = kmalloc(4, GFP_KERNEL); 2041 if (!buf) 2042 return -ENOMEM; 2043 2044 ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4); 2045 if (ret < 0) 2046 goto out_free; 2047 2048 /* 2049 * FT232H CBUS Memory Map 2050 * 2051 * 0x1a: X- (upper nibble -> AC5) 2052 * 0x1b: -X (lower nibble -> AC6) 2053 * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8) 2054 */ 2055 cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4; 2056 2057 priv->gc.ngpio = 4; 2058 priv->gpio_altfunc = 0xff; 2059 2060 for (i = 0; i < priv->gc.ngpio; ++i) { 2061 if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO) 2062 priv->gpio_altfunc &= ~BIT(i); 2063 cbus_config >>= 4; 2064 } 2065 2066 out_free: 2067 kfree(buf); 2068 2069 return ret; 2070 } 2071 2072 static int ftdi_gpio_init_ft232r(struct usb_serial_port *port) 2073 { 2074 struct ftdi_private *priv = usb_get_serial_port_data(port); 2075 u16 cbus_config; 2076 u8 *buf; 2077 int ret; 2078 int i; 2079 2080 buf = kmalloc(2, GFP_KERNEL); 2081 if (!buf) 2082 return -ENOMEM; 2083 2084 ret = ftdi_read_eeprom(port->serial, buf, 0x14, 2); 2085 if (ret < 0) 2086 goto out_free; 2087 2088 cbus_config = le16_to_cpup((__le16 *)buf); 2089 dev_dbg(&port->dev, "cbus_config = 0x%04x\n", cbus_config); 2090 2091 priv->gc.ngpio = 4; 2092 2093 priv->gpio_altfunc = 0xff; 2094 for (i = 0; i < priv->gc.ngpio; ++i) { 2095 if ((cbus_config & 0xf) == FTDI_FT232R_CBUS_MUX_GPIO) 2096 priv->gpio_altfunc &= ~BIT(i); 2097 cbus_config >>= 4; 2098 } 2099 out_free: 2100 kfree(buf); 2101 2102 return ret; 2103 } 2104 2105 static int ftdi_gpio_init_ftx(struct usb_serial_port *port) 2106 { 2107 struct ftdi_private *priv = usb_get_serial_port_data(port); 2108 struct usb_serial *serial = port->serial; 2109 const u16 cbus_cfg_addr = 0x1a; 2110 const u16 cbus_cfg_size = 4; 2111 u8 *cbus_cfg_buf; 2112 int result; 2113 u8 i; 2114 2115 cbus_cfg_buf = kmalloc(cbus_cfg_size, GFP_KERNEL); 2116 if (!cbus_cfg_buf) 2117 return -ENOMEM; 2118 2119 result = ftdi_read_eeprom(serial, cbus_cfg_buf, 2120 cbus_cfg_addr, cbus_cfg_size); 2121 if (result < 0) 2122 goto out_free; 2123 2124 /* FIXME: FT234XD alone has 1 GPIO, but how to recognize this IC? */ 2125 priv->gc.ngpio = 4; 2126 2127 /* Determine which pins are configured for CBUS bitbanging */ 2128 priv->gpio_altfunc = 0xff; 2129 for (i = 0; i < priv->gc.ngpio; ++i) { 2130 if (cbus_cfg_buf[i] == FTDI_FTX_CBUS_MUX_GPIO) 2131 priv->gpio_altfunc &= ~BIT(i); 2132 } 2133 2134 out_free: 2135 kfree(cbus_cfg_buf); 2136 2137 return result; 2138 } 2139 2140 static int ftdi_gpio_init(struct usb_serial_port *port) 2141 { 2142 struct ftdi_private *priv = usb_get_serial_port_data(port); 2143 struct usb_serial *serial = port->serial; 2144 int result; 2145 2146 switch (priv->chip_type) { 2147 case FT232H: 2148 result = ftdi_gpio_init_ft232h(port); 2149 break; 2150 case FT232RL: 2151 result = ftdi_gpio_init_ft232r(port); 2152 break; 2153 case FTX: 2154 result = ftdi_gpio_init_ftx(port); 2155 break; 2156 default: 2157 return 0; 2158 } 2159 2160 if (result < 0) 2161 return result; 2162 2163 mutex_init(&priv->gpio_lock); 2164 2165 priv->gc.label = "ftdi-cbus"; 2166 priv->gc.request = ftdi_gpio_request; 2167 priv->gc.get_direction = ftdi_gpio_direction_get; 2168 priv->gc.direction_input = ftdi_gpio_direction_input; 2169 priv->gc.direction_output = ftdi_gpio_direction_output; 2170 priv->gc.get = ftdi_gpio_get; 2171 priv->gc.set = ftdi_gpio_set; 2172 priv->gc.get_multiple = ftdi_gpio_get_multiple; 2173 priv->gc.set_multiple = ftdi_gpio_set_multiple; 2174 priv->gc.owner = THIS_MODULE; 2175 priv->gc.parent = &serial->interface->dev; 2176 priv->gc.base = -1; 2177 priv->gc.can_sleep = true; 2178 2179 result = gpiochip_add_data(&priv->gc, port); 2180 if (!result) 2181 priv->gpio_registered = true; 2182 2183 return result; 2184 } 2185 2186 static void ftdi_gpio_remove(struct usb_serial_port *port) 2187 { 2188 struct ftdi_private *priv = usb_get_serial_port_data(port); 2189 2190 if (priv->gpio_registered) { 2191 gpiochip_remove(&priv->gc); 2192 priv->gpio_registered = false; 2193 } 2194 2195 if (priv->gpio_used) { 2196 /* Exiting CBUS-mode does not reset pin states. */ 2197 ftdi_exit_cbus_mode(port); 2198 priv->gpio_used = false; 2199 } 2200 } 2201 2202 #else 2203 2204 static int ftdi_gpio_init(struct usb_serial_port *port) 2205 { 2206 return 0; 2207 } 2208 2209 static void ftdi_gpio_remove(struct usb_serial_port *port) { } 2210 2211 #endif /* CONFIG_GPIOLIB */ 2212 2213 /* 2214 * *************************************************************************** 2215 * FTDI driver specific functions 2216 * *************************************************************************** 2217 */ 2218 2219 /* Probe function to check for special devices */ 2220 static int ftdi_sio_probe(struct usb_serial *serial, 2221 const struct usb_device_id *id) 2222 { 2223 const struct ftdi_sio_quirk *quirk = 2224 (struct ftdi_sio_quirk *)id->driver_info; 2225 2226 if (quirk && quirk->probe) { 2227 int ret = quirk->probe(serial); 2228 if (ret != 0) 2229 return ret; 2230 } 2231 2232 usb_set_serial_data(serial, (void *)id->driver_info); 2233 2234 return 0; 2235 } 2236 2237 static int ftdi_sio_port_probe(struct usb_serial_port *port) 2238 { 2239 struct ftdi_private *priv; 2240 const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); 2241 int result; 2242 2243 priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); 2244 if (!priv) 2245 return -ENOMEM; 2246 2247 mutex_init(&priv->cfg_lock); 2248 2249 if (quirk && quirk->port_probe) 2250 quirk->port_probe(priv); 2251 2252 usb_set_serial_port_data(port, priv); 2253 2254 ftdi_determine_type(port); 2255 ftdi_set_max_packet_size(port); 2256 if (read_latency_timer(port) < 0) 2257 priv->latency = 16; 2258 write_latency_timer(port); 2259 create_sysfs_attrs(port); 2260 2261 result = ftdi_gpio_init(port); 2262 if (result < 0) { 2263 dev_err(&port->serial->interface->dev, 2264 "GPIO initialisation failed: %d\n", 2265 result); 2266 } 2267 2268 return 0; 2269 } 2270 2271 /* Setup for the USB-UIRT device, which requires hardwired 2272 * baudrate (38400 gets mapped to 312500) */ 2273 /* Called from usbserial:serial_probe */ 2274 static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) 2275 { 2276 priv->flags |= ASYNC_SPD_CUST; 2277 priv->custom_divisor = 77; 2278 priv->force_baud = 38400; 2279 } 2280 2281 /* Setup for the HE-TIRA1 device, which requires hardwired 2282 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ 2283 2284 static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) 2285 { 2286 priv->flags |= ASYNC_SPD_CUST; 2287 priv->custom_divisor = 240; 2288 priv->force_baud = 38400; 2289 priv->force_rtscts = 1; 2290 } 2291 2292 /* 2293 * Module parameter to control latency timer for NDI FTDI-based USB devices. 2294 * If this value is not set in /etc/modprobe.d/ its value will be set 2295 * to 1ms. 2296 */ 2297 static int ndi_latency_timer = 1; 2298 2299 /* Setup for the NDI FTDI-based USB devices, which requires hardwired 2300 * baudrate (19200 gets mapped to 1200000). 2301 * 2302 * Called from usbserial:serial_probe. 2303 */ 2304 static int ftdi_NDI_device_setup(struct usb_serial *serial) 2305 { 2306 struct usb_device *udev = serial->dev; 2307 int latency = ndi_latency_timer; 2308 2309 if (latency == 0) 2310 latency = 1; 2311 if (latency > 99) 2312 latency = 99; 2313 2314 dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency); 2315 dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency); 2316 2317 /* FIXME: errors are not returned */ 2318 usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 2319 FTDI_SIO_SET_LATENCY_TIMER_REQUEST, 2320 FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, 2321 latency, 0, NULL, 0, WDR_TIMEOUT); 2322 return 0; 2323 } 2324 2325 /* 2326 * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko 2327 * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from 2328 * userspace using openocd. 2329 */ 2330 static int ftdi_jtag_probe(struct usb_serial *serial) 2331 { 2332 struct usb_device *udev = serial->dev; 2333 struct usb_interface *interface = serial->interface; 2334 2335 if (interface == udev->actconfig->interface[0]) { 2336 dev_info(&udev->dev, 2337 "Ignoring serial port reserved for JTAG\n"); 2338 return -ENODEV; 2339 } 2340 2341 return 0; 2342 } 2343 2344 static int ftdi_8u2232c_probe(struct usb_serial *serial) 2345 { 2346 struct usb_device *udev = serial->dev; 2347 2348 if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) 2349 return ftdi_jtag_probe(serial); 2350 2351 if (udev->product && 2352 (!strcmp(udev->product, "Arrow USB Blaster") || 2353 !strcmp(udev->product, "BeagleBone/XDS100V2") || 2354 !strcmp(udev->product, "SNAP Connect E10"))) 2355 return ftdi_jtag_probe(serial); 2356 2357 return 0; 2358 } 2359 2360 /* 2361 * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's 2362 * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and 2363 * can be accessed from userspace. 2364 * The next two ports are enabled as UARTs by default, where port 2 is 2365 * a conventional RS-232 UART. 2366 */ 2367 static int ftdi_stmclite_probe(struct usb_serial *serial) 2368 { 2369 struct usb_device *udev = serial->dev; 2370 struct usb_interface *interface = serial->interface; 2371 2372 if (interface == udev->actconfig->interface[0] || 2373 interface == udev->actconfig->interface[1]) { 2374 dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); 2375 return -ENODEV; 2376 } 2377 2378 return 0; 2379 } 2380 2381 static int ftdi_sio_port_remove(struct usb_serial_port *port) 2382 { 2383 struct ftdi_private *priv = usb_get_serial_port_data(port); 2384 2385 ftdi_gpio_remove(port); 2386 2387 remove_sysfs_attrs(port); 2388 2389 kfree(priv); 2390 2391 return 0; 2392 } 2393 2394 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) 2395 { 2396 struct usb_device *dev = port->serial->dev; 2397 struct ftdi_private *priv = usb_get_serial_port_data(port); 2398 2399 /* No error checking for this (will get errors later anyway) */ 2400 /* See ftdi_sio.h for description of what is reset */ 2401 usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2402 FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, 2403 FTDI_SIO_RESET_SIO, 2404 priv->interface, NULL, 0, WDR_TIMEOUT); 2405 2406 /* Termios defaults are set by usb_serial_init. We don't change 2407 port->tty->termios - this would lose speed settings, etc. 2408 This is same behaviour as serial.c/rs_open() - Kuba */ 2409 2410 /* ftdi_set_termios will send usb control messages */ 2411 if (tty) 2412 ftdi_set_termios(tty, port, NULL); 2413 2414 return usb_serial_generic_open(tty, port); 2415 } 2416 2417 static void ftdi_dtr_rts(struct usb_serial_port *port, int on) 2418 { 2419 struct ftdi_private *priv = usb_get_serial_port_data(port); 2420 2421 /* Disable flow control */ 2422 if (!on) { 2423 if (usb_control_msg(port->serial->dev, 2424 usb_sndctrlpipe(port->serial->dev, 0), 2425 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2426 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2427 0, priv->interface, NULL, 0, 2428 WDR_TIMEOUT) < 0) { 2429 dev_err(&port->dev, "error from flowcontrol urb\n"); 2430 } 2431 } 2432 /* drop RTS and DTR */ 2433 if (on) 2434 set_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2435 else 2436 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2437 } 2438 2439 /* The SIO requires the first byte to have: 2440 * B0 1 2441 * B1 0 2442 * B2..7 length of message excluding byte 0 2443 * 2444 * The new devices do not require this byte 2445 */ 2446 static int ftdi_prepare_write_buffer(struct usb_serial_port *port, 2447 void *dest, size_t size) 2448 { 2449 struct ftdi_private *priv; 2450 int count; 2451 unsigned long flags; 2452 2453 priv = usb_get_serial_port_data(port); 2454 2455 if (priv->chip_type == SIO) { 2456 unsigned char *buffer = dest; 2457 int i, len, c; 2458 2459 count = 0; 2460 spin_lock_irqsave(&port->lock, flags); 2461 for (i = 0; i < size - 1; i += priv->max_packet_size) { 2462 len = min_t(int, size - i, priv->max_packet_size) - 1; 2463 c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); 2464 if (!c) 2465 break; 2466 port->icount.tx += c; 2467 buffer[i] = (c << 2) + 1; 2468 count += c + 1; 2469 } 2470 spin_unlock_irqrestore(&port->lock, flags); 2471 } else { 2472 count = kfifo_out_locked(&port->write_fifo, dest, size, 2473 &port->lock); 2474 port->icount.tx += count; 2475 } 2476 2477 return count; 2478 } 2479 2480 #define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) 2481 2482 static int ftdi_process_packet(struct usb_serial_port *port, 2483 struct ftdi_private *priv, unsigned char *buf, int len) 2484 { 2485 unsigned char status; 2486 bool brkint = false; 2487 int i; 2488 char flag; 2489 2490 if (len < 2) { 2491 dev_dbg(&port->dev, "malformed packet\n"); 2492 return 0; 2493 } 2494 2495 /* Compare new line status to the old one, signal if different/ 2496 N.B. packet may be processed more than once, but differences 2497 are only processed once. */ 2498 status = buf[0] & FTDI_STATUS_B0_MASK; 2499 if (status != priv->prev_status) { 2500 char diff_status = status ^ priv->prev_status; 2501 2502 if (diff_status & FTDI_RS0_CTS) 2503 port->icount.cts++; 2504 if (diff_status & FTDI_RS0_DSR) 2505 port->icount.dsr++; 2506 if (diff_status & FTDI_RS0_RI) 2507 port->icount.rng++; 2508 if (diff_status & FTDI_RS0_RLSD) { 2509 struct tty_struct *tty; 2510 2511 port->icount.dcd++; 2512 tty = tty_port_tty_get(&port->port); 2513 if (tty) 2514 usb_serial_handle_dcd_change(port, tty, 2515 status & FTDI_RS0_RLSD); 2516 tty_kref_put(tty); 2517 } 2518 2519 wake_up_interruptible(&port->port.delta_msr_wait); 2520 priv->prev_status = status; 2521 } 2522 2523 /* save if the transmitter is empty or not */ 2524 if (buf[1] & FTDI_RS_TEMT) 2525 priv->transmit_empty = 1; 2526 else 2527 priv->transmit_empty = 0; 2528 2529 if (len == 2) 2530 return 0; /* status only */ 2531 2532 /* 2533 * Break and error status must only be processed for packets with 2534 * data payload to avoid over-reporting. 2535 */ 2536 flag = TTY_NORMAL; 2537 if (buf[1] & FTDI_RS_ERR_MASK) { 2538 /* 2539 * Break takes precedence over parity, which takes precedence 2540 * over framing errors. Note that break is only associated 2541 * with the last character in the buffer and only when it's a 2542 * NUL. 2543 */ 2544 if (buf[1] & FTDI_RS_BI && buf[len - 1] == '\0') { 2545 port->icount.brk++; 2546 brkint = true; 2547 } 2548 if (buf[1] & FTDI_RS_PE) { 2549 flag = TTY_PARITY; 2550 port->icount.parity++; 2551 } else if (buf[1] & FTDI_RS_FE) { 2552 flag = TTY_FRAME; 2553 port->icount.frame++; 2554 } 2555 /* Overrun is special, not associated with a char */ 2556 if (buf[1] & FTDI_RS_OE) { 2557 port->icount.overrun++; 2558 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); 2559 } 2560 } 2561 2562 port->icount.rx += len - 2; 2563 2564 if (brkint || port->sysrq) { 2565 for (i = 2; i < len; i++) { 2566 if (brkint && i == len - 1) { 2567 if (usb_serial_handle_break(port)) 2568 return len - 3; 2569 flag = TTY_BREAK; 2570 } 2571 if (usb_serial_handle_sysrq_char(port, buf[i])) 2572 continue; 2573 tty_insert_flip_char(&port->port, buf[i], flag); 2574 } 2575 } else { 2576 tty_insert_flip_string_fixed_flag(&port->port, buf + 2, flag, 2577 len - 2); 2578 } 2579 2580 return len - 2; 2581 } 2582 2583 static void ftdi_process_read_urb(struct urb *urb) 2584 { 2585 struct usb_serial_port *port = urb->context; 2586 struct ftdi_private *priv = usb_get_serial_port_data(port); 2587 char *data = urb->transfer_buffer; 2588 int i; 2589 int len; 2590 int count = 0; 2591 2592 for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { 2593 len = min_t(int, urb->actual_length - i, priv->max_packet_size); 2594 count += ftdi_process_packet(port, priv, &data[i], len); 2595 } 2596 2597 if (count) 2598 tty_flip_buffer_push(&port->port); 2599 } 2600 2601 static void ftdi_break_ctl(struct tty_struct *tty, int break_state) 2602 { 2603 struct usb_serial_port *port = tty->driver_data; 2604 struct ftdi_private *priv = usb_get_serial_port_data(port); 2605 u16 value; 2606 2607 /* break_state = -1 to turn on break, and 0 to turn off break */ 2608 /* see drivers/char/tty_io.c to see it used */ 2609 /* last_set_data_value NEVER has the break bit set in it */ 2610 2611 if (break_state) 2612 value = priv->last_set_data_value | FTDI_SIO_SET_BREAK; 2613 else 2614 value = priv->last_set_data_value; 2615 2616 if (usb_control_msg(port->serial->dev, 2617 usb_sndctrlpipe(port->serial->dev, 0), 2618 FTDI_SIO_SET_DATA_REQUEST, 2619 FTDI_SIO_SET_DATA_REQUEST_TYPE, 2620 value , priv->interface, 2621 NULL, 0, WDR_TIMEOUT) < 0) { 2622 dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", 2623 __func__, break_state); 2624 } 2625 2626 dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, 2627 break_state, value); 2628 2629 } 2630 2631 static bool ftdi_tx_empty(struct usb_serial_port *port) 2632 { 2633 unsigned char buf[2]; 2634 int ret; 2635 2636 ret = ftdi_get_modem_status(port, buf); 2637 if (ret == 2) { 2638 if (!(buf[1] & FTDI_RS_TEMT)) 2639 return false; 2640 } 2641 2642 return true; 2643 } 2644 2645 /* old_termios contains the original termios settings and tty->termios contains 2646 * the new setting to be used 2647 * WARNING: set_termios calls this with old_termios in kernel space 2648 */ 2649 static void ftdi_set_termios(struct tty_struct *tty, 2650 struct usb_serial_port *port, struct ktermios *old_termios) 2651 { 2652 struct usb_device *dev = port->serial->dev; 2653 struct device *ddev = &port->dev; 2654 struct ftdi_private *priv = usb_get_serial_port_data(port); 2655 struct ktermios *termios = &tty->termios; 2656 unsigned int cflag = termios->c_cflag; 2657 u16 value, index; 2658 int ret; 2659 2660 /* Force baud rate if this device requires it, unless it is set to 2661 B0. */ 2662 if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { 2663 dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__); 2664 tty_encode_baud_rate(tty, priv->force_baud, 2665 priv->force_baud); 2666 } 2667 2668 /* Force RTS-CTS if this device requires it. */ 2669 if (priv->force_rtscts) { 2670 dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__); 2671 termios->c_cflag |= CRTSCTS; 2672 } 2673 2674 /* 2675 * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to 2676 * support CS5/6 and revert the CSIZE setting instead. 2677 * 2678 * CS5 however is used to control some smartcard readers which abuse 2679 * this limitation to switch modes. Original FTDI chips fall back to 2680 * eight data bits. 2681 * 2682 * TODO: Implement a quirk to only allow this with mentioned 2683 * readers. One I know of (Argolis Smartreader V1) 2684 * returns "USB smartcard server" as iInterface string. 2685 * The vendor didn't bother with a custom VID/PID of 2686 * course. 2687 */ 2688 if (C_CSIZE(tty) == CS6) { 2689 dev_warn(ddev, "requested CSIZE setting not supported\n"); 2690 2691 termios->c_cflag &= ~CSIZE; 2692 if (old_termios) 2693 termios->c_cflag |= old_termios->c_cflag & CSIZE; 2694 else 2695 termios->c_cflag |= CS8; 2696 } 2697 2698 cflag = termios->c_cflag; 2699 2700 if (!old_termios) 2701 goto no_skip; 2702 2703 if (old_termios->c_cflag == termios->c_cflag 2704 && old_termios->c_ispeed == termios->c_ispeed 2705 && old_termios->c_ospeed == termios->c_ospeed) 2706 goto no_c_cflag_changes; 2707 2708 /* NOTE These routines can get interrupted by 2709 ftdi_sio_read_bulk_callback - need to examine what this means - 2710 don't see any problems yet */ 2711 2712 if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == 2713 (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) 2714 goto no_data_parity_stop_changes; 2715 2716 no_skip: 2717 /* Set number of data bits, parity, stop bits */ 2718 2719 value = 0; 2720 value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : 2721 FTDI_SIO_SET_DATA_STOP_BITS_1); 2722 if (cflag & PARENB) { 2723 if (cflag & CMSPAR) 2724 value |= cflag & PARODD ? 2725 FTDI_SIO_SET_DATA_PARITY_MARK : 2726 FTDI_SIO_SET_DATA_PARITY_SPACE; 2727 else 2728 value |= cflag & PARODD ? 2729 FTDI_SIO_SET_DATA_PARITY_ODD : 2730 FTDI_SIO_SET_DATA_PARITY_EVEN; 2731 } else { 2732 value |= FTDI_SIO_SET_DATA_PARITY_NONE; 2733 } 2734 switch (cflag & CSIZE) { 2735 case CS5: 2736 dev_dbg(ddev, "Setting CS5 quirk\n"); 2737 break; 2738 case CS7: 2739 value |= 7; 2740 dev_dbg(ddev, "Setting CS7\n"); 2741 break; 2742 default: 2743 case CS8: 2744 value |= 8; 2745 dev_dbg(ddev, "Setting CS8\n"); 2746 break; 2747 } 2748 2749 /* This is needed by the break command since it uses the same command 2750 - but is or'ed with this value */ 2751 priv->last_set_data_value = value; 2752 2753 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2754 FTDI_SIO_SET_DATA_REQUEST, 2755 FTDI_SIO_SET_DATA_REQUEST_TYPE, 2756 value , priv->interface, 2757 NULL, 0, WDR_SHORT_TIMEOUT) < 0) { 2758 dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", 2759 __func__); 2760 } 2761 2762 /* Now do the baudrate */ 2763 no_data_parity_stop_changes: 2764 if ((cflag & CBAUD) == B0) { 2765 /* Disable flow control */ 2766 if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2767 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2768 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2769 0, priv->interface, 2770 NULL, 0, WDR_TIMEOUT) < 0) { 2771 dev_err(ddev, "%s error from disable flowcontrol urb\n", 2772 __func__); 2773 } 2774 /* Drop RTS and DTR */ 2775 clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2776 } else { 2777 /* set the baudrate determined before */ 2778 mutex_lock(&priv->cfg_lock); 2779 if (change_speed(tty, port)) 2780 dev_err(ddev, "%s urb failed to set baudrate\n", __func__); 2781 mutex_unlock(&priv->cfg_lock); 2782 /* Ensure RTS and DTR are raised when baudrate changed from 0 */ 2783 if (old_termios && (old_termios->c_cflag & CBAUD) == B0) 2784 set_mctrl(port, TIOCM_DTR | TIOCM_RTS); 2785 } 2786 2787 no_c_cflag_changes: 2788 /* Set hardware-assisted flow control */ 2789 value = 0; 2790 2791 if (C_CRTSCTS(tty)) { 2792 dev_dbg(&port->dev, "enabling rts/cts flow control\n"); 2793 index = FTDI_SIO_RTS_CTS_HS; 2794 } else if (I_IXON(tty)) { 2795 dev_dbg(&port->dev, "enabling xon/xoff flow control\n"); 2796 index = FTDI_SIO_XON_XOFF_HS; 2797 value = STOP_CHAR(tty) << 8 | START_CHAR(tty); 2798 } else { 2799 dev_dbg(&port->dev, "disabling flow control\n"); 2800 index = FTDI_SIO_DISABLE_FLOW_CTRL; 2801 } 2802 2803 index |= priv->interface; 2804 2805 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), 2806 FTDI_SIO_SET_FLOW_CTRL_REQUEST, 2807 FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, 2808 value, index, NULL, 0, WDR_TIMEOUT); 2809 if (ret < 0) 2810 dev_err(&port->dev, "failed to set flow control: %d\n", ret); 2811 } 2812 2813 /* 2814 * Get modem-control status. 2815 * 2816 * Returns the number of status bytes retrieved (device dependant), or 2817 * negative error code. 2818 */ 2819 static int ftdi_get_modem_status(struct usb_serial_port *port, 2820 unsigned char status[2]) 2821 { 2822 struct ftdi_private *priv = usb_get_serial_port_data(port); 2823 unsigned char *buf; 2824 int len; 2825 int ret; 2826 2827 buf = kmalloc(2, GFP_KERNEL); 2828 if (!buf) 2829 return -ENOMEM; 2830 /* 2831 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in 2832 * the same format as the data returned from the in point. 2833 */ 2834 switch (priv->chip_type) { 2835 case SIO: 2836 len = 1; 2837 break; 2838 case FT8U232AM: 2839 case FT232BM: 2840 case FT2232C: 2841 case FT232RL: 2842 case FT2232H: 2843 case FT4232H: 2844 case FT232H: 2845 case FTX: 2846 len = 2; 2847 break; 2848 default: 2849 ret = -EFAULT; 2850 goto out; 2851 } 2852 2853 ret = usb_control_msg(port->serial->dev, 2854 usb_rcvctrlpipe(port->serial->dev, 0), 2855 FTDI_SIO_GET_MODEM_STATUS_REQUEST, 2856 FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 2857 0, priv->interface, 2858 buf, len, WDR_TIMEOUT); 2859 2860 /* NOTE: We allow short responses and handle that below. */ 2861 if (ret < 1) { 2862 dev_err(&port->dev, "failed to get modem status: %d\n", ret); 2863 if (ret >= 0) 2864 ret = -EIO; 2865 ret = usb_translate_errors(ret); 2866 goto out; 2867 } 2868 2869 status[0] = buf[0]; 2870 if (ret > 1) 2871 status[1] = buf[1]; 2872 else 2873 status[1] = 0; 2874 2875 dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0], 2876 status[1]); 2877 out: 2878 kfree(buf); 2879 2880 return ret; 2881 } 2882 2883 static int ftdi_tiocmget(struct tty_struct *tty) 2884 { 2885 struct usb_serial_port *port = tty->driver_data; 2886 struct ftdi_private *priv = usb_get_serial_port_data(port); 2887 unsigned char buf[2]; 2888 int ret; 2889 2890 ret = ftdi_get_modem_status(port, buf); 2891 if (ret < 0) 2892 return ret; 2893 2894 ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | 2895 (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | 2896 (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | 2897 (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | 2898 priv->last_dtr_rts; 2899 2900 return ret; 2901 } 2902 2903 static int ftdi_tiocmset(struct tty_struct *tty, 2904 unsigned int set, unsigned int clear) 2905 { 2906 struct usb_serial_port *port = tty->driver_data; 2907 2908 return update_mctrl(port, set, clear); 2909 } 2910 2911 static int ftdi_ioctl(struct tty_struct *tty, 2912 unsigned int cmd, unsigned long arg) 2913 { 2914 struct usb_serial_port *port = tty->driver_data; 2915 void __user *argp = (void __user *)arg; 2916 2917 switch (cmd) { 2918 case TIOCSERGETLSR: 2919 return get_lsr_info(port, argp); 2920 default: 2921 break; 2922 } 2923 2924 return -ENOIOCTLCMD; 2925 } 2926 2927 module_usb_serial_driver(serial_drivers, id_table_combined); 2928 2929 MODULE_AUTHOR(DRIVER_AUTHOR); 2930 MODULE_DESCRIPTION(DRIVER_DESC); 2931 MODULE_LICENSE("GPL"); 2932 2933 module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); 2934 MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); 2935