1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Fintek F81232 USB to serial adaptor driver 4 * Fintek F81532A/534A/535/536 USB to 2/4/8/12 serial adaptor driver 5 * 6 * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) 7 * Copyright (C) 2012 Linux Foundation 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/errno.h> 12 #include <linux/slab.h> 13 #include <linux/tty.h> 14 #include <linux/tty_driver.h> 15 #include <linux/tty_flip.h> 16 #include <linux/serial.h> 17 #include <linux/module.h> 18 #include <linux/moduleparam.h> 19 #include <linux/mutex.h> 20 #include <linux/uaccess.h> 21 #include <linux/usb.h> 22 #include <linux/usb/serial.h> 23 #include <linux/serial_reg.h> 24 25 #define F81232_ID \ 26 { USB_DEVICE(0x1934, 0x0706) } /* 1 port UART device */ 27 28 #define F81534A_SERIES_ID \ 29 { USB_DEVICE(0x2c42, 0x1602) }, /* In-Box 2 port UART device */ \ 30 { USB_DEVICE(0x2c42, 0x1604) }, /* In-Box 4 port UART device */ \ 31 { USB_DEVICE(0x2c42, 0x1605) }, /* In-Box 8 port UART device */ \ 32 { USB_DEVICE(0x2c42, 0x1606) }, /* In-Box 12 port UART device */ \ 33 { USB_DEVICE(0x2c42, 0x1608) }, /* Non-Flash type */ \ 34 { USB_DEVICE(0x2c42, 0x1632) }, /* 2 port UART device */ \ 35 { USB_DEVICE(0x2c42, 0x1634) }, /* 4 port UART device */ \ 36 { USB_DEVICE(0x2c42, 0x1635) }, /* 8 port UART device */ \ 37 { USB_DEVICE(0x2c42, 0x1636) } /* 12 port UART device */ 38 39 #define F81534A_CTRL_ID \ 40 { USB_DEVICE(0x2c42, 0x16f8) } /* Global control device */ 41 42 static const struct usb_device_id f81232_id_table[] = { 43 F81232_ID, 44 { } /* Terminating entry */ 45 }; 46 47 static const struct usb_device_id f81534a_id_table[] = { 48 F81534A_SERIES_ID, 49 { } /* Terminating entry */ 50 }; 51 52 static const struct usb_device_id f81534a_ctrl_id_table[] = { 53 F81534A_CTRL_ID, 54 { } /* Terminating entry */ 55 }; 56 57 static const struct usb_device_id combined_id_table[] = { 58 F81232_ID, 59 F81534A_SERIES_ID, 60 F81534A_CTRL_ID, 61 { } /* Terminating entry */ 62 }; 63 MODULE_DEVICE_TABLE(usb, combined_id_table); 64 65 /* Maximum baudrate for F81232 */ 66 #define F81232_MAX_BAUDRATE 1500000 67 #define F81232_DEF_BAUDRATE 9600 68 69 /* USB Control EP parameter */ 70 #define F81232_REGISTER_REQUEST 0xa0 71 #define F81232_GET_REGISTER 0xc0 72 #define F81232_SET_REGISTER 0x40 73 #define F81534A_ACCESS_REG_RETRY 2 74 75 #define SERIAL_BASE_ADDRESS 0x0120 76 #define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) 77 #define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) 78 #define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) 79 #define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) 80 #define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) 81 #define LINE_STATUS_REGISTER (0x05 + SERIAL_BASE_ADDRESS) 82 #define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) 83 84 /* 85 * F81232 Clock registers (106h) 86 * 87 * Bit1-0: Clock source selector 88 * 00: 1.846MHz. 89 * 01: 18.46MHz. 90 * 10: 24MHz. 91 * 11: 14.77MHz. 92 */ 93 #define F81232_CLK_REGISTER 0x106 94 #define F81232_CLK_1_846_MHZ 0 95 #define F81232_CLK_18_46_MHZ BIT(0) 96 #define F81232_CLK_24_MHZ BIT(1) 97 #define F81232_CLK_14_77_MHZ (BIT(1) | BIT(0)) 98 #define F81232_CLK_MASK GENMASK(1, 0) 99 100 #define F81534A_MODE_REG 0x107 101 #define F81534A_TRIGGER_MASK GENMASK(3, 2) 102 #define F81534A_TRIGGER_MULTIPLE_4X BIT(3) 103 #define F81534A_FIFO_128BYTE (BIT(1) | BIT(0)) 104 105 /* Serial port self GPIO control, 2bytes [control&output data][input data] */ 106 #define F81534A_GPIO_REG 0x10e 107 #define F81534A_GPIO_MODE2_DIR BIT(6) /* 1: input, 0: output */ 108 #define F81534A_GPIO_MODE1_DIR BIT(5) 109 #define F81534A_GPIO_MODE0_DIR BIT(4) 110 #define F81534A_GPIO_MODE2_OUTPUT BIT(2) 111 #define F81534A_GPIO_MODE1_OUTPUT BIT(1) 112 #define F81534A_GPIO_MODE0_OUTPUT BIT(0) 113 114 #define F81534A_CTRL_CMD_ENABLE_PORT 0x116 115 116 struct f81232_private { 117 struct mutex lock; 118 u8 modem_control; 119 u8 modem_status; 120 u8 shadow_lcr; 121 speed_t baud_base; 122 struct work_struct lsr_work; 123 struct work_struct interrupt_work; 124 struct usb_serial_port *port; 125 }; 126 127 static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 }; 128 static u8 const clock_table[] = { F81232_CLK_1_846_MHZ, F81232_CLK_14_77_MHZ, 129 F81232_CLK_18_46_MHZ, F81232_CLK_24_MHZ }; 130 131 static int calc_baud_divisor(speed_t baudrate, speed_t clockrate) 132 { 133 if (!baudrate) 134 return 0; 135 136 return DIV_ROUND_CLOSEST(clockrate, baudrate); 137 } 138 139 static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) 140 { 141 int status; 142 struct usb_device *dev = port->serial->dev; 143 144 status = usb_control_msg_recv(dev, 145 0, 146 F81232_REGISTER_REQUEST, 147 F81232_GET_REGISTER, 148 reg, 149 0, 150 val, 151 sizeof(*val), 152 USB_CTRL_GET_TIMEOUT, 153 GFP_KERNEL); 154 if (status) { 155 dev_err(&port->dev, "%s failed status: %d\n", __func__, status); 156 status = usb_translate_errors(status); 157 } 158 159 return status; 160 } 161 162 static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) 163 { 164 int status; 165 struct usb_device *dev = port->serial->dev; 166 167 status = usb_control_msg_send(dev, 168 0, 169 F81232_REGISTER_REQUEST, 170 F81232_SET_REGISTER, 171 reg, 172 0, 173 &val, 174 sizeof(val), 175 USB_CTRL_SET_TIMEOUT, 176 GFP_KERNEL); 177 if (status) { 178 dev_err(&port->dev, "%s failed status: %d\n", __func__, status); 179 status = usb_translate_errors(status); 180 } 181 182 return status; 183 } 184 185 static int f81232_set_mask_register(struct usb_serial_port *port, u16 reg, 186 u8 mask, u8 val) 187 { 188 int status; 189 u8 tmp; 190 191 status = f81232_get_register(port, reg, &tmp); 192 if (status) 193 return status; 194 195 tmp = (tmp & ~mask) | (val & mask); 196 197 return f81232_set_register(port, reg, tmp); 198 } 199 200 static void f81232_read_msr(struct usb_serial_port *port) 201 { 202 int status; 203 u8 current_msr; 204 struct tty_struct *tty; 205 struct f81232_private *priv = usb_get_serial_port_data(port); 206 207 mutex_lock(&priv->lock); 208 status = f81232_get_register(port, MODEM_STATUS_REGISTER, 209 ¤t_msr); 210 if (status) { 211 dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); 212 mutex_unlock(&priv->lock); 213 return; 214 } 215 216 if (!(current_msr & UART_MSR_ANY_DELTA)) { 217 mutex_unlock(&priv->lock); 218 return; 219 } 220 221 priv->modem_status = current_msr; 222 223 if (current_msr & UART_MSR_DCTS) 224 port->icount.cts++; 225 if (current_msr & UART_MSR_DDSR) 226 port->icount.dsr++; 227 if (current_msr & UART_MSR_TERI) 228 port->icount.rng++; 229 if (current_msr & UART_MSR_DDCD) { 230 port->icount.dcd++; 231 tty = tty_port_tty_get(&port->port); 232 if (tty) { 233 usb_serial_handle_dcd_change(port, tty, 234 current_msr & UART_MSR_DCD); 235 236 tty_kref_put(tty); 237 } 238 } 239 240 wake_up_interruptible(&port->port.delta_msr_wait); 241 mutex_unlock(&priv->lock); 242 } 243 244 static int f81232_set_mctrl(struct usb_serial_port *port, 245 unsigned int set, unsigned int clear) 246 { 247 u8 val; 248 int status; 249 struct f81232_private *priv = usb_get_serial_port_data(port); 250 251 if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) 252 return 0; /* no change */ 253 254 /* 'set' takes precedence over 'clear' */ 255 clear &= ~set; 256 257 /* force enable interrupt with OUT2 */ 258 mutex_lock(&priv->lock); 259 val = UART_MCR_OUT2 | priv->modem_control; 260 261 if (clear & TIOCM_DTR) 262 val &= ~UART_MCR_DTR; 263 264 if (clear & TIOCM_RTS) 265 val &= ~UART_MCR_RTS; 266 267 if (set & TIOCM_DTR) 268 val |= UART_MCR_DTR; 269 270 if (set & TIOCM_RTS) 271 val |= UART_MCR_RTS; 272 273 dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, 274 val, priv->modem_control); 275 276 status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); 277 if (status) { 278 dev_err(&port->dev, "%s set MCR status < 0\n", __func__); 279 mutex_unlock(&priv->lock); 280 return status; 281 } 282 283 priv->modem_control = val; 284 mutex_unlock(&priv->lock); 285 286 return 0; 287 } 288 289 static void f81232_update_line_status(struct usb_serial_port *port, 290 unsigned char *data, 291 size_t actual_length) 292 { 293 struct f81232_private *priv = usb_get_serial_port_data(port); 294 295 if (!actual_length) 296 return; 297 298 switch (data[0] & 0x07) { 299 case 0x00: /* msr change */ 300 dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); 301 schedule_work(&priv->interrupt_work); 302 break; 303 case 0x02: /* tx-empty */ 304 break; 305 case 0x04: /* rx data available */ 306 break; 307 case 0x06: /* lsr change */ 308 /* we can forget it. the LSR will read from bulk-in */ 309 dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); 310 break; 311 } 312 } 313 314 static void f81232_read_int_callback(struct urb *urb) 315 { 316 struct usb_serial_port *port = urb->context; 317 unsigned char *data = urb->transfer_buffer; 318 unsigned int actual_length = urb->actual_length; 319 int status = urb->status; 320 int retval; 321 322 switch (status) { 323 case 0: 324 /* success */ 325 break; 326 case -ECONNRESET: 327 case -ENOENT: 328 case -ESHUTDOWN: 329 /* this urb is terminated, clean up */ 330 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", 331 __func__, status); 332 return; 333 default: 334 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", 335 __func__, status); 336 goto exit; 337 } 338 339 usb_serial_debug_data(&port->dev, __func__, 340 urb->actual_length, urb->transfer_buffer); 341 342 f81232_update_line_status(port, data, actual_length); 343 344 exit: 345 retval = usb_submit_urb(urb, GFP_ATOMIC); 346 if (retval) 347 dev_err(&urb->dev->dev, 348 "%s - usb_submit_urb failed with result %d\n", 349 __func__, retval); 350 } 351 352 static char f81232_handle_lsr(struct usb_serial_port *port, u8 lsr) 353 { 354 struct f81232_private *priv = usb_get_serial_port_data(port); 355 char tty_flag = TTY_NORMAL; 356 357 if (!(lsr & UART_LSR_BRK_ERROR_BITS)) 358 return tty_flag; 359 360 if (lsr & UART_LSR_BI) { 361 tty_flag = TTY_BREAK; 362 port->icount.brk++; 363 usb_serial_handle_break(port); 364 } else if (lsr & UART_LSR_PE) { 365 tty_flag = TTY_PARITY; 366 port->icount.parity++; 367 } else if (lsr & UART_LSR_FE) { 368 tty_flag = TTY_FRAME; 369 port->icount.frame++; 370 } 371 372 if (lsr & UART_LSR_OE) { 373 port->icount.overrun++; 374 schedule_work(&priv->lsr_work); 375 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); 376 } 377 378 return tty_flag; 379 } 380 381 static void f81232_process_read_urb(struct urb *urb) 382 { 383 struct usb_serial_port *port = urb->context; 384 unsigned char *data = urb->transfer_buffer; 385 char tty_flag; 386 unsigned int i; 387 u8 lsr; 388 389 /* 390 * When opening the port we get a 1-byte packet with the current LSR, 391 * which we discard. 392 */ 393 if ((urb->actual_length < 2) || (urb->actual_length % 2)) 394 return; 395 396 /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ 397 398 for (i = 0; i < urb->actual_length; i += 2) { 399 lsr = data[i]; 400 tty_flag = f81232_handle_lsr(port, lsr); 401 402 if (port->sysrq) { 403 if (usb_serial_handle_sysrq_char(port, data[i + 1])) 404 continue; 405 } 406 407 tty_insert_flip_char(&port->port, data[i + 1], tty_flag); 408 } 409 410 tty_flip_buffer_push(&port->port); 411 } 412 413 static void f81534a_process_read_urb(struct urb *urb) 414 { 415 struct usb_serial_port *port = urb->context; 416 unsigned char *data = urb->transfer_buffer; 417 char tty_flag; 418 unsigned int i; 419 u8 lsr; 420 u8 len; 421 422 if (urb->actual_length < 3) { 423 dev_err(&port->dev, "short message received: %d\n", 424 urb->actual_length); 425 return; 426 } 427 428 len = data[0]; 429 if (len != urb->actual_length) { 430 dev_err(&port->dev, "malformed message received: %d (%d)\n", 431 urb->actual_length, len); 432 return; 433 } 434 435 /* bulk-in data: [LEN][Data.....][LSR] */ 436 lsr = data[len - 1]; 437 tty_flag = f81232_handle_lsr(port, lsr); 438 439 if (port->sysrq) { 440 for (i = 1; i < len - 1; ++i) { 441 if (!usb_serial_handle_sysrq_char(port, data[i])) { 442 tty_insert_flip_char(&port->port, data[i], 443 tty_flag); 444 } 445 } 446 } else { 447 tty_insert_flip_string_fixed_flag(&port->port, &data[1], 448 tty_flag, len - 2); 449 } 450 451 tty_flip_buffer_push(&port->port); 452 } 453 454 static void f81232_break_ctl(struct tty_struct *tty, int break_state) 455 { 456 struct usb_serial_port *port = tty->driver_data; 457 struct f81232_private *priv = usb_get_serial_port_data(port); 458 int status; 459 460 mutex_lock(&priv->lock); 461 462 if (break_state) 463 priv->shadow_lcr |= UART_LCR_SBC; 464 else 465 priv->shadow_lcr &= ~UART_LCR_SBC; 466 467 status = f81232_set_register(port, LINE_CONTROL_REGISTER, 468 priv->shadow_lcr); 469 if (status) 470 dev_err(&port->dev, "set break failed: %d\n", status); 471 472 mutex_unlock(&priv->lock); 473 } 474 475 static int f81232_find_clk(speed_t baudrate) 476 { 477 int idx; 478 479 for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) { 480 if (baudrate <= baudrate_table[idx] && 481 baudrate_table[idx] % baudrate == 0) 482 return idx; 483 } 484 485 return -EINVAL; 486 } 487 488 static void f81232_set_baudrate(struct tty_struct *tty, 489 struct usb_serial_port *port, speed_t baudrate, 490 speed_t old_baudrate) 491 { 492 struct f81232_private *priv = usb_get_serial_port_data(port); 493 u8 lcr; 494 int divisor; 495 int status = 0; 496 int i; 497 int idx; 498 speed_t baud_list[] = { baudrate, old_baudrate, F81232_DEF_BAUDRATE }; 499 500 for (i = 0; i < ARRAY_SIZE(baud_list); ++i) { 501 idx = f81232_find_clk(baud_list[i]); 502 if (idx >= 0) { 503 baudrate = baud_list[i]; 504 tty_encode_baud_rate(tty, baudrate, baudrate); 505 break; 506 } 507 } 508 509 if (idx < 0) 510 return; 511 512 priv->baud_base = baudrate_table[idx]; 513 divisor = calc_baud_divisor(baudrate, priv->baud_base); 514 515 status = f81232_set_mask_register(port, F81232_CLK_REGISTER, 516 F81232_CLK_MASK, clock_table[idx]); 517 if (status) { 518 dev_err(&port->dev, "%s failed to set CLK_REG: %d\n", 519 __func__, status); 520 return; 521 } 522 523 status = f81232_get_register(port, LINE_CONTROL_REGISTER, 524 &lcr); /* get LCR */ 525 if (status) { 526 dev_err(&port->dev, "%s failed to get LCR: %d\n", 527 __func__, status); 528 return; 529 } 530 531 status = f81232_set_register(port, LINE_CONTROL_REGISTER, 532 lcr | UART_LCR_DLAB); /* Enable DLAB */ 533 if (status) { 534 dev_err(&port->dev, "%s failed to set DLAB: %d\n", 535 __func__, status); 536 return; 537 } 538 539 status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, 540 divisor & 0x00ff); /* low */ 541 if (status) { 542 dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", 543 __func__, status); 544 goto reapply_lcr; 545 } 546 547 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 548 (divisor & 0xff00) >> 8); /* high */ 549 if (status) { 550 dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", 551 __func__, status); 552 } 553 554 reapply_lcr: 555 status = f81232_set_register(port, LINE_CONTROL_REGISTER, 556 lcr & ~UART_LCR_DLAB); 557 if (status) { 558 dev_err(&port->dev, "%s failed to set DLAB: %d\n", 559 __func__, status); 560 } 561 } 562 563 static int f81232_port_enable(struct usb_serial_port *port) 564 { 565 u8 val; 566 int status; 567 568 /* fifo on, trigger8, clear TX/RX*/ 569 val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | 570 UART_FCR_CLEAR_XMIT; 571 572 status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); 573 if (status) { 574 dev_err(&port->dev, "%s failed to set FCR: %d\n", 575 __func__, status); 576 return status; 577 } 578 579 /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ 580 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 581 UART_IER_MSI); 582 if (status) { 583 dev_err(&port->dev, "%s failed to set IER: %d\n", 584 __func__, status); 585 return status; 586 } 587 588 return 0; 589 } 590 591 static int f81232_port_disable(struct usb_serial_port *port) 592 { 593 int status; 594 595 status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); 596 if (status) { 597 dev_err(&port->dev, "%s failed to set IER: %d\n", 598 __func__, status); 599 return status; 600 } 601 602 return 0; 603 } 604 605 static void f81232_set_termios(struct tty_struct *tty, 606 struct usb_serial_port *port, struct ktermios *old_termios) 607 { 608 struct f81232_private *priv = usb_get_serial_port_data(port); 609 u8 new_lcr = 0; 610 int status = 0; 611 speed_t baudrate; 612 speed_t old_baud; 613 614 /* Don't change anything if nothing has changed */ 615 if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) 616 return; 617 618 if (C_BAUD(tty) == B0) 619 f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); 620 else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) 621 f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); 622 623 baudrate = tty_get_baud_rate(tty); 624 if (baudrate > 0) { 625 if (old_termios) 626 old_baud = tty_termios_baud_rate(old_termios); 627 else 628 old_baud = F81232_DEF_BAUDRATE; 629 630 f81232_set_baudrate(tty, port, baudrate, old_baud); 631 } 632 633 if (C_PARENB(tty)) { 634 new_lcr |= UART_LCR_PARITY; 635 636 if (!C_PARODD(tty)) 637 new_lcr |= UART_LCR_EPAR; 638 639 if (C_CMSPAR(tty)) 640 new_lcr |= UART_LCR_SPAR; 641 } 642 643 if (C_CSTOPB(tty)) 644 new_lcr |= UART_LCR_STOP; 645 646 switch (C_CSIZE(tty)) { 647 case CS5: 648 new_lcr |= UART_LCR_WLEN5; 649 break; 650 case CS6: 651 new_lcr |= UART_LCR_WLEN6; 652 break; 653 case CS7: 654 new_lcr |= UART_LCR_WLEN7; 655 break; 656 default: 657 case CS8: 658 new_lcr |= UART_LCR_WLEN8; 659 break; 660 } 661 662 mutex_lock(&priv->lock); 663 664 new_lcr |= (priv->shadow_lcr & UART_LCR_SBC); 665 status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); 666 if (status) { 667 dev_err(&port->dev, "%s failed to set LCR: %d\n", 668 __func__, status); 669 } 670 671 priv->shadow_lcr = new_lcr; 672 673 mutex_unlock(&priv->lock); 674 } 675 676 static int f81232_tiocmget(struct tty_struct *tty) 677 { 678 int r; 679 struct usb_serial_port *port = tty->driver_data; 680 struct f81232_private *port_priv = usb_get_serial_port_data(port); 681 u8 mcr, msr; 682 683 /* force get current MSR changed state */ 684 f81232_read_msr(port); 685 686 mutex_lock(&port_priv->lock); 687 mcr = port_priv->modem_control; 688 msr = port_priv->modem_status; 689 mutex_unlock(&port_priv->lock); 690 691 r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | 692 (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | 693 (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | 694 (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | 695 (msr & UART_MSR_RI ? TIOCM_RI : 0) | 696 (msr & UART_MSR_DSR ? TIOCM_DSR : 0); 697 698 return r; 699 } 700 701 static int f81232_tiocmset(struct tty_struct *tty, 702 unsigned int set, unsigned int clear) 703 { 704 struct usb_serial_port *port = tty->driver_data; 705 706 return f81232_set_mctrl(port, set, clear); 707 } 708 709 static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) 710 { 711 int result; 712 713 result = f81232_port_enable(port); 714 if (result) 715 return result; 716 717 /* Setup termios */ 718 if (tty) 719 f81232_set_termios(tty, port, NULL); 720 721 result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); 722 if (result) { 723 dev_err(&port->dev, "%s - failed submitting interrupt urb," 724 " error %d\n", __func__, result); 725 return result; 726 } 727 728 result = usb_serial_generic_open(tty, port); 729 if (result) { 730 usb_kill_urb(port->interrupt_in_urb); 731 return result; 732 } 733 734 return 0; 735 } 736 737 static int f81534a_open(struct tty_struct *tty, struct usb_serial_port *port) 738 { 739 int status; 740 u8 mask; 741 u8 val; 742 743 val = F81534A_TRIGGER_MULTIPLE_4X | F81534A_FIFO_128BYTE; 744 mask = F81534A_TRIGGER_MASK | F81534A_FIFO_128BYTE; 745 746 status = f81232_set_mask_register(port, F81534A_MODE_REG, mask, val); 747 if (status) { 748 dev_err(&port->dev, "failed to set MODE_REG: %d\n", status); 749 return status; 750 } 751 752 return f81232_open(tty, port); 753 } 754 755 static void f81232_close(struct usb_serial_port *port) 756 { 757 struct f81232_private *port_priv = usb_get_serial_port_data(port); 758 759 f81232_port_disable(port); 760 usb_serial_generic_close(port); 761 usb_kill_urb(port->interrupt_in_urb); 762 flush_work(&port_priv->interrupt_work); 763 flush_work(&port_priv->lsr_work); 764 } 765 766 static void f81232_dtr_rts(struct usb_serial_port *port, int on) 767 { 768 if (on) 769 f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); 770 else 771 f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); 772 } 773 774 static bool f81232_tx_empty(struct usb_serial_port *port) 775 { 776 int status; 777 u8 tmp; 778 779 status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); 780 if (!status) { 781 if ((tmp & UART_LSR_TEMT) != UART_LSR_TEMT) 782 return false; 783 } 784 785 return true; 786 } 787 788 static int f81232_carrier_raised(struct usb_serial_port *port) 789 { 790 u8 msr; 791 struct f81232_private *priv = usb_get_serial_port_data(port); 792 793 mutex_lock(&priv->lock); 794 msr = priv->modem_status; 795 mutex_unlock(&priv->lock); 796 797 if (msr & UART_MSR_DCD) 798 return 1; 799 return 0; 800 } 801 802 static void f81232_get_serial(struct tty_struct *tty, struct serial_struct *ss) 803 { 804 struct usb_serial_port *port = tty->driver_data; 805 struct f81232_private *priv = usb_get_serial_port_data(port); 806 807 ss->baud_base = priv->baud_base; 808 } 809 810 static void f81232_interrupt_work(struct work_struct *work) 811 { 812 struct f81232_private *priv = 813 container_of(work, struct f81232_private, interrupt_work); 814 815 f81232_read_msr(priv->port); 816 } 817 818 static void f81232_lsr_worker(struct work_struct *work) 819 { 820 struct f81232_private *priv; 821 struct usb_serial_port *port; 822 int status; 823 u8 tmp; 824 825 priv = container_of(work, struct f81232_private, lsr_work); 826 port = priv->port; 827 828 status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp); 829 if (status) 830 dev_warn(&port->dev, "read LSR failed: %d\n", status); 831 } 832 833 static int f81534a_ctrl_set_register(struct usb_interface *intf, u16 reg, 834 u16 size, void *val) 835 { 836 struct usb_device *dev = interface_to_usbdev(intf); 837 int retry = F81534A_ACCESS_REG_RETRY; 838 int status; 839 840 while (retry--) { 841 status = usb_control_msg_send(dev, 842 0, 843 F81232_REGISTER_REQUEST, 844 F81232_SET_REGISTER, 845 reg, 846 0, 847 val, 848 size, 849 USB_CTRL_SET_TIMEOUT, 850 GFP_KERNEL); 851 if (status) { 852 status = usb_translate_errors(status); 853 if (status == -EIO) 854 continue; 855 } 856 857 break; 858 } 859 860 if (status) { 861 dev_err(&intf->dev, "failed to set register 0x%x: %d\n", 862 reg, status); 863 } 864 865 return status; 866 } 867 868 static int f81534a_ctrl_enable_all_ports(struct usb_interface *intf, bool en) 869 { 870 unsigned char enable[2] = {0}; 871 int status; 872 873 /* 874 * Enable all available serial ports, define as following: 875 * bit 15 : Reset behavior (when HUB got soft reset) 876 * 0: maintain all serial port enabled state. 877 * 1: disable all serial port. 878 * bit 0~11 : Serial port enable bit. 879 */ 880 if (en) { 881 enable[0] = 0xff; 882 enable[1] = 0x8f; 883 } 884 885 status = f81534a_ctrl_set_register(intf, F81534A_CTRL_CMD_ENABLE_PORT, 886 sizeof(enable), enable); 887 if (status) 888 dev_err(&intf->dev, "failed to enable ports: %d\n", status); 889 890 return status; 891 } 892 893 static int f81534a_ctrl_probe(struct usb_interface *intf, 894 const struct usb_device_id *id) 895 { 896 return f81534a_ctrl_enable_all_ports(intf, true); 897 } 898 899 static void f81534a_ctrl_disconnect(struct usb_interface *intf) 900 { 901 f81534a_ctrl_enable_all_ports(intf, false); 902 } 903 904 static int f81534a_ctrl_resume(struct usb_interface *intf) 905 { 906 return f81534a_ctrl_enable_all_ports(intf, true); 907 } 908 909 static int f81232_port_probe(struct usb_serial_port *port) 910 { 911 struct f81232_private *priv; 912 913 priv = devm_kzalloc(&port->dev, sizeof(*priv), GFP_KERNEL); 914 if (!priv) 915 return -ENOMEM; 916 917 mutex_init(&priv->lock); 918 INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); 919 INIT_WORK(&priv->lsr_work, f81232_lsr_worker); 920 921 usb_set_serial_port_data(port, priv); 922 923 priv->port = port; 924 925 return 0; 926 } 927 928 static int f81534a_port_probe(struct usb_serial_port *port) 929 { 930 int status; 931 932 /* tri-state with pull-high, default RS232 Mode */ 933 status = f81232_set_register(port, F81534A_GPIO_REG, 934 F81534A_GPIO_MODE2_DIR); 935 if (status) 936 return status; 937 938 return f81232_port_probe(port); 939 } 940 941 static int f81232_suspend(struct usb_serial *serial, pm_message_t message) 942 { 943 struct usb_serial_port *port = serial->port[0]; 944 struct f81232_private *port_priv = usb_get_serial_port_data(port); 945 int i; 946 947 for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) 948 usb_kill_urb(port->read_urbs[i]); 949 950 usb_kill_urb(port->interrupt_in_urb); 951 952 if (port_priv) { 953 flush_work(&port_priv->interrupt_work); 954 flush_work(&port_priv->lsr_work); 955 } 956 957 return 0; 958 } 959 960 static int f81232_resume(struct usb_serial *serial) 961 { 962 struct usb_serial_port *port = serial->port[0]; 963 int result; 964 965 if (tty_port_initialized(&port->port)) { 966 result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); 967 if (result) { 968 dev_err(&port->dev, "submit interrupt urb failed: %d\n", 969 result); 970 return result; 971 } 972 } 973 974 return usb_serial_generic_resume(serial); 975 } 976 977 static struct usb_serial_driver f81232_device = { 978 .driver = { 979 .owner = THIS_MODULE, 980 .name = "f81232", 981 }, 982 .id_table = f81232_id_table, 983 .num_ports = 1, 984 .bulk_in_size = 256, 985 .bulk_out_size = 256, 986 .open = f81232_open, 987 .close = f81232_close, 988 .dtr_rts = f81232_dtr_rts, 989 .carrier_raised = f81232_carrier_raised, 990 .get_serial = f81232_get_serial, 991 .break_ctl = f81232_break_ctl, 992 .set_termios = f81232_set_termios, 993 .tiocmget = f81232_tiocmget, 994 .tiocmset = f81232_tiocmset, 995 .tiocmiwait = usb_serial_generic_tiocmiwait, 996 .tx_empty = f81232_tx_empty, 997 .process_read_urb = f81232_process_read_urb, 998 .read_int_callback = f81232_read_int_callback, 999 .port_probe = f81232_port_probe, 1000 .suspend = f81232_suspend, 1001 .resume = f81232_resume, 1002 }; 1003 1004 static struct usb_serial_driver f81534a_device = { 1005 .driver = { 1006 .owner = THIS_MODULE, 1007 .name = "f81534a", 1008 }, 1009 .id_table = f81534a_id_table, 1010 .num_ports = 1, 1011 .open = f81534a_open, 1012 .close = f81232_close, 1013 .dtr_rts = f81232_dtr_rts, 1014 .carrier_raised = f81232_carrier_raised, 1015 .get_serial = f81232_get_serial, 1016 .break_ctl = f81232_break_ctl, 1017 .set_termios = f81232_set_termios, 1018 .tiocmget = f81232_tiocmget, 1019 .tiocmset = f81232_tiocmset, 1020 .tiocmiwait = usb_serial_generic_tiocmiwait, 1021 .tx_empty = f81232_tx_empty, 1022 .process_read_urb = f81534a_process_read_urb, 1023 .read_int_callback = f81232_read_int_callback, 1024 .port_probe = f81534a_port_probe, 1025 .suspend = f81232_suspend, 1026 .resume = f81232_resume, 1027 }; 1028 1029 static struct usb_serial_driver * const serial_drivers[] = { 1030 &f81232_device, 1031 &f81534a_device, 1032 NULL, 1033 }; 1034 1035 static struct usb_driver f81534a_ctrl_driver = { 1036 .name = "f81534a_ctrl", 1037 .id_table = f81534a_ctrl_id_table, 1038 .probe = f81534a_ctrl_probe, 1039 .disconnect = f81534a_ctrl_disconnect, 1040 .resume = f81534a_ctrl_resume, 1041 }; 1042 1043 static int __init f81232_init(void) 1044 { 1045 int status; 1046 1047 status = usb_register_driver(&f81534a_ctrl_driver, THIS_MODULE, 1048 KBUILD_MODNAME); 1049 if (status) 1050 return status; 1051 1052 status = usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, 1053 combined_id_table); 1054 if (status) { 1055 usb_deregister(&f81534a_ctrl_driver); 1056 return status; 1057 } 1058 1059 return 0; 1060 } 1061 1062 static void __exit f81232_exit(void) 1063 { 1064 usb_serial_deregister_drivers(serial_drivers); 1065 usb_deregister(&f81534a_ctrl_driver); 1066 } 1067 1068 module_init(f81232_init); 1069 module_exit(f81232_exit); 1070 1071 MODULE_DESCRIPTION("Fintek F81232/532A/534A/535/536 USB to serial driver"); 1072 MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); 1073 MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); 1074 MODULE_LICENSE("GPL v2"); 1075