1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * USB Serial Console driver 4 * 5 * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com) 6 * 7 * Thanks to Randy Dunlap for the original version of this code. 8 * 9 */ 10 11 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 12 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/slab.h> 16 #include <linux/tty.h> 17 #include <linux/console.h> 18 #include <linux/serial.h> 19 #include <linux/usb.h> 20 #include <linux/usb/serial.h> 21 22 struct usbcons_info { 23 int magic; 24 int break_flag; 25 struct usb_serial_port *port; 26 }; 27 28 static struct usbcons_info usbcons_info; 29 static struct console usbcons; 30 31 /* 32 * ------------------------------------------------------------ 33 * USB Serial console driver 34 * 35 * Much of the code here is copied from drivers/char/serial.c 36 * and implements a phony serial console in the same way that 37 * serial.c does so that in case some software queries it, 38 * it will get the same results. 39 * 40 * Things that are different from the way the serial port code 41 * does things, is that we call the lower level usb-serial 42 * driver code to initialize the device, and we set the initial 43 * console speeds based on the command line arguments. 44 * ------------------------------------------------------------ 45 */ 46 47 static const struct tty_operations usb_console_fake_tty_ops = { 48 }; 49 50 /* 51 * The parsing of the command line works exactly like the 52 * serial.c code, except that the specifier is "ttyUSB" instead 53 * of "ttyS". 54 */ 55 static int usb_console_setup(struct console *co, char *options) 56 { 57 struct usbcons_info *info = &usbcons_info; 58 int baud = 9600; 59 int bits = 8; 60 int parity = 'n'; 61 int doflow = 0; 62 int cflag = CREAD | HUPCL | CLOCAL; 63 char *s; 64 struct usb_serial *serial; 65 struct usb_serial_port *port; 66 int retval; 67 struct tty_struct *tty = NULL; 68 struct ktermios dummy; 69 70 if (options) { 71 baud = simple_strtoul(options, NULL, 10); 72 s = options; 73 while (*s >= '0' && *s <= '9') 74 s++; 75 if (*s) 76 parity = *s++; 77 if (*s) 78 bits = *s++ - '0'; 79 if (*s) 80 doflow = (*s++ == 'r'); 81 } 82 83 /* Sane default */ 84 if (baud == 0) 85 baud = 9600; 86 87 switch (bits) { 88 case 7: 89 cflag |= CS7; 90 break; 91 default: 92 case 8: 93 cflag |= CS8; 94 break; 95 } 96 switch (parity) { 97 case 'o': case 'O': 98 cflag |= PARODD; 99 break; 100 case 'e': case 'E': 101 cflag |= PARENB; 102 break; 103 } 104 105 if (doflow) 106 cflag |= CRTSCTS; 107 108 /* 109 * no need to check the index here: if the index is wrong, console 110 * code won't call us 111 */ 112 port = usb_serial_port_get_by_minor(co->index); 113 if (port == NULL) { 114 /* no device is connected yet, sorry :( */ 115 pr_err("No USB device connected to ttyUSB%i\n", co->index); 116 return -ENODEV; 117 } 118 serial = port->serial; 119 120 retval = usb_autopm_get_interface(serial->interface); 121 if (retval) 122 goto error_get_interface; 123 124 tty_port_tty_set(&port->port, NULL); 125 126 info->port = port; 127 128 ++port->port.count; 129 if (!tty_port_initialized(&port->port)) { 130 if (serial->type->set_termios) { 131 /* 132 * allocate a fake tty so the driver can initialize 133 * the termios structure, then later call set_termios to 134 * configure according to command line arguments 135 */ 136 tty = kzalloc(sizeof(*tty), GFP_KERNEL); 137 if (!tty) { 138 retval = -ENOMEM; 139 goto reset_open_count; 140 } 141 kref_init(&tty->kref); 142 tty->driver = usb_serial_tty_driver; 143 tty->index = co->index; 144 init_ldsem(&tty->ldisc_sem); 145 spin_lock_init(&tty->files_lock); 146 INIT_LIST_HEAD(&tty->tty_files); 147 kref_get(&tty->driver->kref); 148 __module_get(tty->driver->owner); 149 tty->ops = &usb_console_fake_tty_ops; 150 tty_init_termios(tty); 151 tty_port_tty_set(&port->port, tty); 152 } 153 154 /* only call the device specific open if this 155 * is the first time the port is opened */ 156 retval = serial->type->open(NULL, port); 157 if (retval) { 158 dev_err(&port->dev, "could not open USB console port\n"); 159 goto fail; 160 } 161 162 if (serial->type->set_termios) { 163 tty->termios.c_cflag = cflag; 164 tty_termios_encode_baud_rate(&tty->termios, baud, baud); 165 memset(&dummy, 0, sizeof(struct ktermios)); 166 serial->type->set_termios(tty, port, &dummy); 167 168 tty_port_tty_set(&port->port, NULL); 169 tty_save_termios(tty); 170 tty_kref_put(tty); 171 } 172 tty_port_set_initialized(&port->port, true); 173 } 174 /* Now that any required fake tty operations are completed restore 175 * the tty port count */ 176 --port->port.count; 177 /* The console is special in terms of closing the device so 178 * indicate this port is now acting as a system console. */ 179 port->port.console = 1; 180 181 mutex_unlock(&serial->disc_mutex); 182 return retval; 183 184 fail: 185 tty_port_tty_set(&port->port, NULL); 186 tty_kref_put(tty); 187 reset_open_count: 188 port->port.count = 0; 189 info->port = NULL; 190 usb_autopm_put_interface(serial->interface); 191 error_get_interface: 192 mutex_unlock(&serial->disc_mutex); 193 usb_serial_put(serial); 194 return retval; 195 } 196 197 static void usb_console_write(struct console *co, 198 const char *buf, unsigned count) 199 { 200 static struct usbcons_info *info = &usbcons_info; 201 struct usb_serial_port *port = info->port; 202 struct usb_serial *serial; 203 int retval = -ENODEV; 204 205 if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED) 206 return; 207 serial = port->serial; 208 209 if (count == 0) 210 return; 211 212 dev_dbg(&port->dev, "%s - %d byte(s)\n", __func__, count); 213 214 if (!port->port.console) { 215 dev_dbg(&port->dev, "%s - port not opened\n", __func__); 216 return; 217 } 218 219 while (count) { 220 unsigned int i; 221 unsigned int lf; 222 /* search for LF so we can insert CR if necessary */ 223 for (i = 0, lf = 0 ; i < count ; i++) { 224 if (*(buf + i) == 10) { 225 lf = 1; 226 i++; 227 break; 228 } 229 } 230 /* pass on to the driver specific version of this function if 231 it is available */ 232 retval = serial->type->write(NULL, port, buf, i); 233 dev_dbg(&port->dev, "%s - write: %d\n", __func__, retval); 234 if (lf) { 235 /* append CR after LF */ 236 unsigned char cr = 13; 237 retval = serial->type->write(NULL, port, &cr, 1); 238 dev_dbg(&port->dev, "%s - write cr: %d\n", 239 __func__, retval); 240 } 241 buf += i; 242 count -= i; 243 } 244 } 245 246 static struct tty_driver *usb_console_device(struct console *co, int *index) 247 { 248 struct tty_driver **p = (struct tty_driver **)co->data; 249 250 if (!*p) 251 return NULL; 252 253 *index = co->index; 254 return *p; 255 } 256 257 static struct console usbcons = { 258 .name = "ttyUSB", 259 .write = usb_console_write, 260 .device = usb_console_device, 261 .setup = usb_console_setup, 262 .flags = CON_PRINTBUFFER, 263 .index = -1, 264 .data = &usb_serial_tty_driver, 265 }; 266 267 void usb_serial_console_disconnect(struct usb_serial *serial) 268 { 269 if (serial->port[0] && serial->port[0] == usbcons_info.port) { 270 usb_serial_console_exit(); 271 usb_serial_put(serial); 272 } 273 } 274 275 void usb_serial_console_init(int minor) 276 { 277 if (minor == 0) { 278 /* 279 * Call register_console() if this is the first device plugged 280 * in. If we call it earlier, then the callback to 281 * console_setup() will fail, as there is not a device seen by 282 * the USB subsystem yet. 283 */ 284 /* 285 * Register console. 286 * NOTES: 287 * console_setup() is called (back) immediately (from 288 * register_console). console_write() is called immediately 289 * from register_console iff CON_PRINTBUFFER is set in flags. 290 */ 291 pr_debug("registering the USB serial console.\n"); 292 register_console(&usbcons); 293 } 294 } 295 296 void usb_serial_console_exit(void) 297 { 298 if (usbcons_info.port) { 299 unregister_console(&usbcons); 300 usbcons_info.port->port.console = 0; 301 usbcons_info.port = NULL; 302 } 303 } 304 305