1# 2# USB Serial device configuration 3# 4 5menuconfig USB_SERIAL 6 tristate "USB Serial Converter support" 7 depends on TTY 8 ---help--- 9 Say Y here if you have a USB device that provides normal serial 10 ports, or acts like a serial device, and you want to connect it to 11 your USB bus. 12 13 Please read <file:Documentation/usb/usb-serial.txt> for more 14 information on the specifics of the different devices that are 15 supported, and on how to use them. 16 17 To compile this driver as a module, choose M here: the 18 module will be called usbserial. 19 20if USB_SERIAL 21 22config USB_SERIAL_CONSOLE 23 bool "USB Serial Console device support" 24 depends on USB_SERIAL=y 25 ---help--- 26 If you say Y here, it will be possible to use a USB to serial 27 converter port as the system console (the system console is the 28 device which receives all kernel messages and warnings and which 29 allows logins in single user mode). This could be useful if some 30 terminal or printer is connected to that serial port. 31 32 Even if you say Y here, the currently visible virtual console 33 (/dev/tty0) will still be used as the system console by default, but 34 you can alter that using a kernel command line option such as 35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of 36 your boot loader (lilo or loadlin) about how to pass options to the 37 kernel at boot time.) 38 39 If you don't have a VGA card installed and you say Y here, the 40 kernel will automatically use the first USB to serial converter 41 port, /dev/ttyUSB0, as system console. 42 43 If unsure, say N. 44 45config USB_SERIAL_GENERIC 46 bool "USB Generic Serial Driver" 47 help 48 Say Y here if you want to use the generic USB serial driver. Please 49 read <file:Documentation/usb/usb-serial.txt> for more information on 50 using this driver. It is recommended that the "USB Serial converter 51 support" be compiled as a module for this driver to be used 52 properly. 53 54config USB_SERIAL_SIMPLE 55 tristate "USB Serial Simple Driver" 56 help 57 Say Y here to use the USB serial "simple" driver. This driver 58 handles a wide range of very simple devices, all in one 59 driver. Specifically, it supports: 60 - Suunto ANT+ USB device. 61 - Medtronic CareLink USB device 62 - Fundamental Software dongle. 63 - HP4x calculators 64 - a number of Motorola phones 65 - Novatel Wireless GPS receivers 66 - Siemens USB/MPI adapter. 67 - ViVOtech ViVOpay USB device. 68 - Infineon Modem Flashloader USB interface 69 - ZIO Motherboard USB serial interface 70 71 To compile this driver as a module, choose M here: the module 72 will be called usb-serial-simple. 73 74config USB_SERIAL_AIRCABLE 75 tristate "USB AIRcable Bluetooth Dongle Driver" 76 help 77 Say Y here if you want to use USB AIRcable Bluetooth Dongle. 78 79 To compile this driver as a module, choose M here: the module 80 will be called aircable. 81 82config USB_SERIAL_ARK3116 83 tristate "USB ARK Micro 3116 USB Serial Driver" 84 help 85 Say Y here if you want to use a ARK Micro 3116 USB to Serial 86 device. 87 88 To compile this driver as a module, choose M here: the 89 module will be called ark3116 90 91config USB_SERIAL_BELKIN 92 tristate "USB Belkin and Peracom Single Port Serial Driver" 93 help 94 Say Y here if you want to use a Belkin USB Serial single port 95 adaptor (F5U103 is one of the model numbers) or the Peracom single 96 port USB to serial adapter. 97 98 To compile this driver as a module, choose M here: the 99 module will be called belkin_sa. 100 101config USB_SERIAL_CH341 102 tristate "USB Winchiphead CH341 Single Port Serial Driver" 103 help 104 Say Y here if you want to use a Winchiphead CH341 single port 105 USB to serial adapter. 106 107 To compile this driver as a module, choose M here: the 108 module will be called ch341. 109 110config USB_SERIAL_WHITEHEAT 111 tristate "USB ConnectTech WhiteHEAT Serial Driver" 112 select USB_EZUSB_FX2 113 help 114 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port 115 USB to serial converter device. 116 117 To compile this driver as a module, choose M here: the 118 module will be called whiteheat. 119 120config USB_SERIAL_DIGI_ACCELEPORT 121 tristate "USB Digi International AccelePort USB Serial Driver" 122 ---help--- 123 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 124 2 port (plus parallel port) and 4 port USB serial converters. The 125 parallel port on the USB 2 appears as a third serial port on Linux. 126 The Digi Acceleport USB 8 is not yet supported by this driver. 127 128 This driver works under SMP with the usb-uhci driver. It does not 129 work under SMP with the uhci driver. 130 131 To compile this driver as a module, choose M here: the 132 module will be called digi_acceleport. 133 134config USB_SERIAL_CP210X 135 tristate "USB CP210x family of UART Bridge Controllers" 136 help 137 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB 138 to RS232 converters. 139 140 To compile this driver as a module, choose M here: the 141 module will be called cp210x. 142 143config USB_SERIAL_CYPRESS_M8 144 tristate "USB Cypress M8 USB Serial Driver" 145 help 146 Say Y here if you want to use a device that contains the Cypress 147 USB to Serial microcontroller, such as the DeLorme Earthmate GPS. 148 149 Attempted SMP support... send bug reports! 150 151 Supported microcontrollers in the CY4601 family are: 152 CY7C63741 CY7C63742 CY7C63743 CY7C64013 153 154 To compile this driver as a module, choose M here: the 155 module will be called cypress_m8. 156 157config USB_SERIAL_EMPEG 158 tristate "USB Empeg empeg-car Mark I/II Driver" 159 help 160 Say Y here if you want to connect to your Empeg empeg-car Mark I/II 161 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 162 device node. See <file:Documentation/usb/usb-serial.txt> for more 163 tidbits of information. 164 165 To compile this driver as a module, choose M here: the 166 module will be called empeg. 167 168config USB_SERIAL_FTDI_SIO 169 tristate "USB FTDI Single Port Serial Driver" 170 ---help--- 171 Say Y here if you want to use a FTDI SIO single port USB to serial 172 converter device. The implementation I have is called the USC-1000. 173 This driver has also be tested with the 245 and 232 devices. 174 175 See <http://ftdi-usb-sio.sourceforge.net/> for more 176 information on this driver and the device. 177 178 To compile this driver as a module, choose M here: the 179 module will be called ftdi_sio. 180 181config USB_SERIAL_VISOR 182 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" 183 help 184 Say Y here if you want to connect to your HandSpring Visor, Palm 185 m500 or m505 through its USB docking station. See 186 <http://usbvisor.sourceforge.net/index.php3> for more information on using this 187 driver. 188 189 To compile this driver as a module, choose M here: the 190 module will be called visor. 191 192config USB_SERIAL_IPAQ 193 tristate "USB PocketPC PDA Driver" 194 help 195 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada 196 or any other PDA running Windows CE 3.0 or PocketPC 2002 197 using a USB cradle/cable. For information on using the driver, 198 read <file:Documentation/usb/usb-serial.txt>. 199 200 To compile this driver as a module, choose M here: the 201 module will be called ipaq. 202 203config USB_SERIAL_IR 204 tristate "USB IR Dongle Serial Driver" 205 help 206 Say Y here if you want to enable simple serial support for USB IrDA 207 devices. This is useful if you do not want to use the full IrDA 208 stack. 209 210 To compile this driver as a module, choose M here: the 211 module will be called ir-usb. 212 213config USB_SERIAL_EDGEPORT 214 tristate "USB Inside Out Edgeport Serial Driver" 215 ---help--- 216 Say Y here if you want to use any of the following devices from 217 Inside Out Networks (Digi): 218 Edgeport/4 219 Rapidport/4 220 Edgeport/4t 221 Edgeport/2 222 Edgeport/4i 223 Edgeport/2i 224 Edgeport/421 225 Edgeport/21 226 Edgeport/8 227 Edgeport/8 Dual 228 Edgeport/2D8 229 Edgeport/4D8 230 Edgeport/8i 231 Edgeport/2 DIN 232 Edgeport/4 DIN 233 Edgeport/16 Dual 234 235 To compile this driver as a module, choose M here: the 236 module will be called io_edgeport. 237 238config USB_SERIAL_EDGEPORT_TI 239 tristate "USB Inside Out Edgeport Serial Driver (TI devices)" 240 help 241 Say Y here if you want to use any of the devices from Inside Out 242 Networks (Digi) that are not supported by the io_edgeport driver. 243 This includes the Edgeport/1 device. 244 245 To compile this driver as a module, choose M here: the 246 module will be called io_ti. 247 248config USB_SERIAL_F81232 249 tristate "USB Fintek F81232 Single Port Serial Driver" 250 help 251 Say Y here if you want to use the Fintek F81232 single 252 port usb to serial adapter. 253 254 To compile this driver as a module, choose M here: the 255 module will be called f81232. 256 257config USB_SERIAL_GARMIN 258 tristate "USB Garmin GPS driver" 259 help 260 Say Y here if you want to connect to your Garmin GPS. 261 Should work with most Garmin GPS devices which have a native USB port. 262 263 See <http://sourceforge.net/projects/garmin-gps> for the latest 264 version of the driver. 265 266 To compile this driver as a module, choose M here: the 267 module will be called garmin_gps. 268 269config USB_SERIAL_IPW 270 tristate "USB IPWireless (3G UMTS TDD) Driver" 271 select USB_SERIAL_WWAN 272 help 273 Say Y here if you want to use a IPWireless USB modem such as 274 the ones supplied by Axity3G/Sentech South Africa. 275 276 To compile this driver as a module, choose M here: the 277 module will be called ipw. 278 279config USB_SERIAL_IUU 280 tristate "USB Infinity USB Unlimited Phoenix Driver" 281 help 282 Say Y here if you want to use a IUU in phoenix mode and get 283 an extra ttyUSBx device. More information available on 284 http://eczema.ecze.com/iuu_phoenix.html 285 286 To compile this driver as a module, choose M here: the 287 module will be called iuu_phoenix.o 288 289config USB_SERIAL_KEYSPAN_PDA 290 tristate "USB Keyspan PDA Single Port Serial Driver" 291 select USB_EZUSB_FX2 292 help 293 Say Y here if you want to use a Keyspan PDA single port USB to 294 serial converter device. This driver makes use of firmware 295 developed from scratch by Brian Warner. 296 297 To compile this driver as a module, choose M here: the 298 module will be called keyspan_pda. 299 300config USB_SERIAL_KEYSPAN 301 tristate "USB Keyspan USA-xxx Serial Driver" 302 select USB_EZUSB_FX2 303 ---help--- 304 Say Y here if you want to use Keyspan USB to serial converter 305 devices. This driver makes use of Keyspan's official firmware 306 and was developed with their support. You must also include 307 firmware to support your particular device(s). 308 309 See <http://blemings.org/hugh/keyspan.html> for more information. 310 311 To compile this driver as a module, choose M here: the 312 module will be called keyspan. 313 314config USB_SERIAL_KEYSPAN_MPR 315 bool "USB Keyspan MPR Firmware" 316 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 317 help 318 Say Y here to include firmware for the Keyspan MPR converter. 319 320config USB_SERIAL_KEYSPAN_USA28 321 bool "USB Keyspan USA-28 Firmware" 322 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 323 help 324 Say Y here to include firmware for the USA-28 converter. 325 326config USB_SERIAL_KEYSPAN_USA28X 327 bool "USB Keyspan USA-28X Firmware" 328 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 329 help 330 Say Y here to include firmware for the USA-28X converter. 331 Be sure you have a USA-28X, there are also 28XA and 28XB 332 models, the label underneath has the actual part number. 333 334config USB_SERIAL_KEYSPAN_USA28XA 335 bool "USB Keyspan USA-28XA Firmware" 336 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 337 help 338 Say Y here to include firmware for the USA-28XA converter. 339 Be sure you have a USA-28XA, there are also 28X and 28XB 340 models, the label underneath has the actual part number. 341 342config USB_SERIAL_KEYSPAN_USA28XB 343 bool "USB Keyspan USA-28XB Firmware" 344 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 345 help 346 Say Y here to include firmware for the USA-28XB converter. 347 Be sure you have a USA-28XB, there are also 28X and 28XA 348 models, the label underneath has the actual part number. 349 350config USB_SERIAL_KEYSPAN_USA19 351 bool "USB Keyspan USA-19 Firmware" 352 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 353 help 354 Say Y here to include firmware for the USA-19 converter. 355 356config USB_SERIAL_KEYSPAN_USA18X 357 bool "USB Keyspan USA-18X Firmware" 358 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 359 help 360 Say Y here to include firmware for the USA-18X converter. 361 362config USB_SERIAL_KEYSPAN_USA19W 363 bool "USB Keyspan USA-19W Firmware" 364 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 365 help 366 Say Y here to include firmware for the USA-19W converter. 367 368config USB_SERIAL_KEYSPAN_USA19QW 369 bool "USB Keyspan USA-19QW Firmware" 370 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 371 help 372 Say Y here to include firmware for the USA-19QW converter. 373 374config USB_SERIAL_KEYSPAN_USA19QI 375 bool "USB Keyspan USA-19QI Firmware" 376 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 377 help 378 Say Y here to include firmware for the USA-19QI converter. 379 380config USB_SERIAL_KEYSPAN_USA49W 381 bool "USB Keyspan USA-49W Firmware" 382 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 383 help 384 Say Y here to include firmware for the USA-49W converter. 385 386config USB_SERIAL_KEYSPAN_USA49WLC 387 bool "USB Keyspan USA-49WLC Firmware" 388 depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL 389 help 390 Say Y here to include firmware for the USA-49WLC converter. 391 392config USB_SERIAL_KLSI 393 tristate "USB KL5KUSB105 (Palmconnect) Driver" 394 ---help--- 395 Say Y here if you want to use a KL5KUSB105 - based single port 396 serial adapter. The most widely known -- and currently the only 397 tested -- device in this category is the PalmConnect USB Serial 398 adapter sold by Palm Inc. for use with their Palm III and Palm V 399 series PDAs. 400 401 Please read <file:Documentation/usb/usb-serial.txt> for more 402 information. 403 404 To compile this driver as a module, choose M here: the 405 module will be called kl5kusb105. 406 407config USB_SERIAL_KOBIL_SCT 408 tristate "USB KOBIL chipcard reader" 409 ---help--- 410 Say Y here if you want to use one of the following KOBIL USB chipcard 411 readers: 412 413 - USB TWIN 414 - KAAN Standard Plus 415 - KAAN SIM 416 - SecOVID Reader Plus 417 - B1 Professional 418 - KAAN Professional 419 420 Note that you need a current CT-API. 421 To compile this driver as a module, choose M here: the 422 module will be called kobil_sct. 423 424config USB_SERIAL_MCT_U232 425 tristate "USB MCT Single Port Serial Driver" 426 ---help--- 427 Say Y here if you want to use a USB Serial single port adapter from 428 Magic Control Technology Corp. (U232 is one of the model numbers). 429 430 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB 431 BAY, Belkin F5U109, and Belkin F5U409 devices. 432 433 To compile this driver as a module, choose M here: the 434 module will be called mct_u232. 435 436config USB_SERIAL_METRO 437 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" 438 ---help--- 439 Say Y here if you want to use a USB POS Metrologic barcode scanner. 440 441 To compile this driver as a module, choose M here: the 442 module will be called metro-usb. 443 444config USB_SERIAL_MOS7720 445 tristate "USB Moschip 7720 Serial Driver" 446 ---help--- 447 Say Y here if you want to use USB Serial single and double 448 port adapters from Moschip Semiconductor Tech. 449 450 To compile this driver as a module, choose M here: the 451 module will be called mos7720. 452 453config USB_SERIAL_MOS7715_PARPORT 454 bool "Support for parallel port on the Moschip 7715" 455 depends on USB_SERIAL_MOS7720 456 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 457 select PARPORT_NOT_PC 458 ---help--- 459 Say Y if you have a Moschip 7715 device and would like to use 460 the parallel port it provides. The port will register with 461 the parport subsystem as a low-level driver. 462 463config USB_SERIAL_MOS7840 464 tristate "USB Moschip 7840/7820 USB Serial Driver" 465 ---help--- 466 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 467 Dual-Serial port device from MosChip Semiconductor. 468 469 The MCS7840 and MCS7820 have been developed to connect a wide range 470 of standard serial devices to a USB host. The MCS7840 has a USB 471 device controller connected to four (4) individual UARTs while the 472 MCS7820 controller connects to two (2) individual UARTs. 473 474 To compile this driver as a module, choose M here: the 475 module will be called mos7840. If unsure, choose N. 476 477config USB_SERIAL_MXUPORT 478 tristate "USB Moxa UPORT Serial Driver" 479 ---help--- 480 Say Y here if you want to use a MOXA UPort Serial hub. 481 482 This driver supports: 483 484 [2 Port] 485 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub 486 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with 487 Isolation 488 489 [4 Port] 490 - UPort 1410 : 4 Port RS-232 USB to Serial Hub 491 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub 492 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with 493 Isolation 494 495 [8 Port] 496 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub 497 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub 498 499 [16 Port] 500 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub 501 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub 502 503 To compile this driver as a module, choose M here: the 504 module will be called mxuport. 505 506config USB_SERIAL_NAVMAN 507 tristate "USB Navman GPS device" 508 help 509 To compile this driver as a module, choose M here: the 510 module will be called navman. 511 512config USB_SERIAL_PL2303 513 tristate "USB Prolific 2303 Single Port Serial Driver" 514 help 515 Say Y here if you want to use the PL2303 USB Serial single port 516 adapter from Prolific. 517 518 To compile this driver as a module, choose M here: the 519 module will be called pl2303. 520 521config USB_SERIAL_OTI6858 522 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" 523 help 524 Say Y here if you want to use the OTi-6858 single port USB to serial 525 converter device. 526 527 To compile this driver as a module, choose M here: the 528 module will be called oti6858. 529 530config USB_SERIAL_QCAUX 531 tristate "USB Qualcomm Auxiliary Serial Port Driver" 532 help 533 Say Y here if you want to use the auxiliary serial ports provided 534 by many modems based on Qualcomm chipsets. These ports often use 535 a proprietary protocol called DM and cannot be used for AT- or 536 PPP-based communication. 537 538 To compile this driver as a module, choose M here: the 539 module will be called qcaux. If unsure, choose N. 540 541config USB_SERIAL_QUALCOMM 542 tristate "USB Qualcomm Serial modem" 543 select USB_SERIAL_WWAN 544 help 545 Say Y here if you have a Qualcomm USB modem device. These are 546 usually wireless cellular modems. 547 548 To compile this driver as a module, choose M here: the 549 module will be called qcserial. 550 551config USB_SERIAL_SPCP8X5 552 tristate "USB SPCP8x5 USB To Serial Driver" 553 help 554 Say Y here if you want to use the spcp8x5 converter chip. This is 555 commonly found in some Z-Wave USB devices. 556 557 To compile this driver as a module, choose M here: the 558 module will be called spcp8x5. 559 560config USB_SERIAL_SAFE 561 tristate "USB Safe Serial (Encapsulated) Driver" 562 563config USB_SERIAL_SAFE_PADDED 564 bool "USB Secure Encapsulated Driver - Padded" 565 depends on USB_SERIAL_SAFE 566 567config USB_SERIAL_SIERRAWIRELESS 568 tristate "USB Sierra Wireless Driver" 569 help 570 Say M here if you want to use Sierra Wireless devices. 571 572 Many devices have a feature known as TRU-Install. For those devices 573 to work properly, the USB Storage Sierra feature must be enabled. 574 575 To compile this driver as a module, choose M here: the 576 module will be called sierra. 577 578config USB_SERIAL_SYMBOL 579 tristate "USB Symbol Barcode driver (serial mode)" 580 help 581 Say Y here if you want to use a Symbol USB Barcode device 582 in serial emulation mode. 583 584 To compile this driver as a module, choose M here: the 585 module will be called symbolserial. 586 587config USB_SERIAL_TI 588 tristate "USB TI 3410/5052 Serial Driver" 589 help 590 Say Y here if you want to use the TI USB 3410 or 5052 591 serial devices. 592 593 To compile this driver as a module, choose M here: the 594 module will be called ti_usb_3410_5052. 595 596config USB_SERIAL_CYBERJACK 597 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" 598 ---help--- 599 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard 600 reader. This is an interface to ISO 7816 compatible contact-based 601 chipcards, e.g. GSM SIMs. 602 603 To compile this driver as a module, choose M here: the 604 module will be called cyberjack. 605 606 If unsure, say N. 607 608config USB_SERIAL_XIRCOM 609 tristate "USB Xircom / Entregra Single Port Serial Driver" 610 select USB_EZUSB_FX2 611 help 612 Say Y here if you want to use a Xircom or Entregra single port USB to 613 serial converter device. This driver makes use of firmware 614 developed from scratch by Brian Warner. 615 616 To compile this driver as a module, choose M here: the 617 module will be called keyspan_pda. 618 619config USB_SERIAL_WWAN 620 tristate 621 622config USB_SERIAL_OPTION 623 tristate "USB driver for GSM and CDMA modems" 624 select USB_SERIAL_WWAN 625 help 626 Say Y here if you have a GSM or CDMA modem that's connected to USB. 627 628 This driver also supports several PCMCIA cards which have a 629 built-in OHCI-USB adapter and an internally-connected GSM modem. 630 The USB bus on these cards is not accessible externally. 631 632 Supported devices include (some of?) those made by: 633 Option, Huawei, Audiovox, Novatel Wireless, or Anydata. 634 635 To compile this driver as a module, choose M here: the 636 module will be called option. 637 638 If this driver doesn't recognize your device, 639 it might be accessible via the FTDI_SIO driver. 640 641config USB_SERIAL_OMNINET 642 tristate "USB ZyXEL omni.net LCD Plus Driver" 643 help 644 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. 645 646 To compile this driver as a module, choose M here: the 647 module will be called omninet. 648 649config USB_SERIAL_OPTICON 650 tristate "USB Opticon Barcode driver (serial mode)" 651 help 652 Say Y here if you want to use a Opticon USB Barcode device 653 in serial emulation mode. 654 655 To compile this driver as a module, choose M here: the 656 module will be called opticon. 657 658config USB_SERIAL_XSENS_MT 659 tristate "Xsens motion tracker serial interface driver" 660 help 661 Say Y here if you want to use Xsens motion trackers. 662 663 This driver supports the new generation of motion trackers 664 by Xsens. Older devices can be accessed using the FTDI_SIO 665 driver. 666 667 To compile this driver as a module, choose M here: the 668 module will be called xsens_mt. 669 670config USB_SERIAL_WISHBONE 671 tristate "USB-Wishbone adapter interface driver" 672 help 673 Say Y here if you want to use a USB attached Wishbone bus. 674 675 Wishbone is an open hardware SoC bus commonly used in FPGA 676 designs. Bus access can be serialized using the Etherbone 677 protocol <http://www.ohwr.org/projects/etherbone-core>. 678 679 This driver is intended to be used with devices which attach 680 their internal Wishbone bus to a USB serial interface using 681 the Etherbone protocol. A userspace library is required to 682 speak the protocol made available by this driver as ttyUSBx. 683 684 To compile this driver as a module, choose M here: the 685 module will be called wishbone-serial. 686 687config USB_SERIAL_SSU100 688 tristate "USB Quatech SSU-100 Single Port Serial Driver" 689 help 690 Say Y here if you want to use the Quatech SSU-100 single 691 port usb to serial adapter. 692 693 To compile this driver as a module, choose M here: the 694 module will be called ssu100. 695 696config USB_SERIAL_QT2 697 tristate "USB Quatech Serial Driver for USB 2 devices" 698 help 699 Say Y here if you want to use the Quatech USB 2 700 serial adapters. 701 702 To compile this driver as a module, choose M here: the 703 module will be called quatech-serial. 704 705config USB_SERIAL_DEBUG 706 tristate "USB Debugging Device" 707 help 708 Say Y here if you have a USB debugging device used to receive 709 debugging data from another machine. The most common of these 710 devices is the NetChip TurboCONNECT device. 711 712 To compile this driver as a module, choose M here: the 713 module will be called usb-debug. 714 715endif # USB_SERIAL 716