1# 2# USB Serial device configuration 3# 4 5menuconfig USB_SERIAL 6 tristate "USB Serial Converter support" 7 depends on TTY 8 ---help--- 9 Say Y here if you have a USB device that provides normal serial 10 ports, or acts like a serial device, and you want to connect it to 11 your USB bus. 12 13 Please read <file:Documentation/usb/usb-serial.txt> for more 14 information on the specifics of the different devices that are 15 supported, and on how to use them. 16 17 To compile this driver as a module, choose M here: the 18 module will be called usbserial. 19 20if USB_SERIAL 21 22config USB_SERIAL_CONSOLE 23 bool "USB Serial Console device support" 24 depends on USB_SERIAL=y 25 ---help--- 26 If you say Y here, it will be possible to use a USB to serial 27 converter port as the system console (the system console is the 28 device which receives all kernel messages and warnings and which 29 allows logins in single user mode). This could be useful if some 30 terminal or printer is connected to that serial port. 31 32 Even if you say Y here, the currently visible virtual console 33 (/dev/tty0) will still be used as the system console by default, but 34 you can alter that using a kernel command line option such as 35 "console=ttyUSB0". (Try "man bootparam" or see the documentation of 36 your boot loader (lilo or loadlin) about how to pass options to the 37 kernel at boot time.) 38 39 If you don't have a VGA card installed and you say Y here, the 40 kernel will automatically use the first USB to serial converter 41 port, /dev/ttyUSB0, as system console. 42 43 If unsure, say N. 44 45config USB_SERIAL_GENERIC 46 bool "USB Generic Serial Driver" 47 help 48 Say Y here if you want to use the generic USB serial driver. Please 49 read <file:Documentation/usb/usb-serial.txt> for more information on 50 using this driver. It is recommended that the "USB Serial converter 51 support" be compiled as a module for this driver to be used 52 properly. 53 54config USB_SERIAL_SIMPLE 55 tristate "USB Serial Simple Driver" 56 help 57 Say Y here to use the USB serial "simple" driver. This driver 58 handles a wide range of very simple devices, all in one 59 driver. Specifically, it supports: 60 - Suunto ANT+ USB device. 61 - Medtronic CareLink USB device 62 - Fundamental Software dongle. 63 - Google USB serial devices 64 - HP4x calculators 65 - a number of Motorola phones 66 - Motorola Tetra devices 67 - Novatel Wireless GPS receivers 68 - Siemens USB/MPI adapter. 69 - ViVOtech ViVOpay USB device. 70 - Infineon Modem Flashloader USB interface 71 - ZIO Motherboard USB serial interface 72 73 To compile this driver as a module, choose M here: the module 74 will be called usb-serial-simple. 75 76config USB_SERIAL_AIRCABLE 77 tristate "USB AIRcable Bluetooth Dongle Driver" 78 help 79 Say Y here if you want to use USB AIRcable Bluetooth Dongle. 80 81 To compile this driver as a module, choose M here: the module 82 will be called aircable. 83 84config USB_SERIAL_ARK3116 85 tristate "USB ARK Micro 3116 USB Serial Driver" 86 help 87 Say Y here if you want to use a ARK Micro 3116 USB to Serial 88 device. 89 90 To compile this driver as a module, choose M here: the 91 module will be called ark3116 92 93config USB_SERIAL_BELKIN 94 tristate "USB Belkin and Peracom Single Port Serial Driver" 95 help 96 Say Y here if you want to use a Belkin USB Serial single port 97 adaptor (F5U103 is one of the model numbers) or the Peracom single 98 port USB to serial adapter. 99 100 To compile this driver as a module, choose M here: the 101 module will be called belkin_sa. 102 103config USB_SERIAL_CH341 104 tristate "USB Winchiphead CH341 Single Port Serial Driver" 105 help 106 Say Y here if you want to use a Winchiphead CH341 single port 107 USB to serial adapter. 108 109 To compile this driver as a module, choose M here: the 110 module will be called ch341. 111 112config USB_SERIAL_WHITEHEAT 113 tristate "USB ConnectTech WhiteHEAT Serial Driver" 114 select USB_EZUSB_FX2 115 help 116 Say Y here if you want to use a ConnectTech WhiteHEAT 4 port 117 USB to serial converter device. 118 119 To compile this driver as a module, choose M here: the 120 module will be called whiteheat. 121 122config USB_SERIAL_DIGI_ACCELEPORT 123 tristate "USB Digi International AccelePort USB Serial Driver" 124 ---help--- 125 Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, 126 2 port (plus parallel port) and 4 port USB serial converters. The 127 parallel port on the USB 2 appears as a third serial port on Linux. 128 The Digi Acceleport USB 8 is not yet supported by this driver. 129 130 This driver works under SMP with the usb-uhci driver. It does not 131 work under SMP with the uhci driver. 132 133 To compile this driver as a module, choose M here: the 134 module will be called digi_acceleport. 135 136config USB_SERIAL_CP210X 137 tristate "USB CP210x family of UART Bridge Controllers" 138 help 139 Say Y here if you want to use a CP2101/CP2102/CP2103 based USB 140 to RS232 converters. 141 142 To compile this driver as a module, choose M here: the 143 module will be called cp210x. 144 145config USB_SERIAL_CYPRESS_M8 146 tristate "USB Cypress M8 USB Serial Driver" 147 help 148 Say Y here if you want to use a device that contains the Cypress 149 USB to Serial microcontroller, such as the DeLorme Earthmate GPS. 150 151 Attempted SMP support... send bug reports! 152 153 Supported microcontrollers in the CY4601 family are: 154 CY7C63741 CY7C63742 CY7C63743 CY7C64013 155 156 To compile this driver as a module, choose M here: the 157 module will be called cypress_m8. 158 159config USB_SERIAL_EMPEG 160 tristate "USB Empeg empeg-car Mark I/II Driver" 161 help 162 Say Y here if you want to connect to your Empeg empeg-car Mark I/II 163 mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} 164 device node. See <file:Documentation/usb/usb-serial.txt> for more 165 tidbits of information. 166 167 To compile this driver as a module, choose M here: the 168 module will be called empeg. 169 170config USB_SERIAL_FTDI_SIO 171 tristate "USB FTDI Single Port Serial Driver" 172 ---help--- 173 Say Y here if you want to use a FTDI SIO single port USB to serial 174 converter device. The implementation I have is called the USC-1000. 175 This driver has also been tested with the 245 and 232 devices. 176 177 See <http://ftdi-usb-sio.sourceforge.net/> for more 178 information on this driver and the device. 179 180 To compile this driver as a module, choose M here: the 181 module will be called ftdi_sio. 182 183config USB_SERIAL_VISOR 184 tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" 185 help 186 Say Y here if you want to connect to your HandSpring Visor, Palm 187 m500 or m505 through its USB docking station. See 188 <http://usbvisor.sourceforge.net/index.php3> for more information on using this 189 driver. 190 191 To compile this driver as a module, choose M here: the 192 module will be called visor. 193 194config USB_SERIAL_IPAQ 195 tristate "USB PocketPC PDA Driver" 196 help 197 Say Y here if you want to connect to your Compaq iPAQ, HP Jornada 198 or any other PDA running Windows CE 3.0 or PocketPC 2002 199 using a USB cradle/cable. For information on using the driver, 200 read <file:Documentation/usb/usb-serial.txt>. 201 202 To compile this driver as a module, choose M here: the 203 module will be called ipaq. 204 205config USB_SERIAL_IR 206 tristate "USB IR Dongle Serial Driver" 207 help 208 Say Y here if you want to enable simple serial support for USB IrDA 209 devices. This is useful if you do not want to use the full IrDA 210 stack. 211 212 To compile this driver as a module, choose M here: the 213 module will be called ir-usb. 214 215config USB_SERIAL_EDGEPORT 216 tristate "USB Inside Out Edgeport Serial Driver" 217 ---help--- 218 Say Y here if you want to use any of the following devices from 219 Inside Out Networks (Digi): 220 Edgeport/4 221 Rapidport/4 222 Edgeport/4t 223 Edgeport/2 224 Edgeport/4i 225 Edgeport/2i 226 Edgeport/421 227 Edgeport/21 228 Edgeport/8 229 Edgeport/8 Dual 230 Edgeport/2D8 231 Edgeport/4D8 232 Edgeport/8i 233 Edgeport/2 DIN 234 Edgeport/4 DIN 235 Edgeport/16 Dual 236 237 To compile this driver as a module, choose M here: the 238 module will be called io_edgeport. 239 240config USB_SERIAL_EDGEPORT_TI 241 tristate "USB Inside Out Edgeport Serial Driver (TI devices)" 242 help 243 Say Y here if you want to use any of the devices from Inside Out 244 Networks (Digi) that are not supported by the io_edgeport driver. 245 This includes the Edgeport/1 device. 246 247 To compile this driver as a module, choose M here: the 248 module will be called io_ti. 249 250config USB_SERIAL_F81232 251 tristate "USB Fintek F81232 Single Port Serial Driver" 252 help 253 Say Y here if you want to use the Fintek F81232 single 254 port usb to serial adapter. 255 256 To compile this driver as a module, choose M here: the 257 module will be called f81232. 258 259config USB_SERIAL_F8153X 260 tristate "USB Fintek F81532/534 Multi-Ports Serial Driver" 261 help 262 Say Y here if you want to use the Fintek F81532/534 Multi-Ports 263 USB to serial adapter. 264 265 To compile this driver as a module, choose M here: the 266 module will be called f81534. 267 268 269config USB_SERIAL_GARMIN 270 tristate "USB Garmin GPS driver" 271 help 272 Say Y here if you want to connect to your Garmin GPS. 273 Should work with most Garmin GPS devices which have a native USB port. 274 275 See <http://sourceforge.net/projects/garmin-gps> for the latest 276 version of the driver. 277 278 To compile this driver as a module, choose M here: the 279 module will be called garmin_gps. 280 281config USB_SERIAL_IPW 282 tristate "USB IPWireless (3G UMTS TDD) Driver" 283 select USB_SERIAL_WWAN 284 help 285 Say Y here if you want to use a IPWireless USB modem such as 286 the ones supplied by Axity3G/Sentech South Africa. 287 288 To compile this driver as a module, choose M here: the 289 module will be called ipw. 290 291config USB_SERIAL_IUU 292 tristate "USB Infinity USB Unlimited Phoenix Driver" 293 help 294 Say Y here if you want to use a IUU in phoenix mode and get 295 an extra ttyUSBx device. More information available on 296 http://eczema.ecze.com/iuu_phoenix.html 297 298 To compile this driver as a module, choose M here: the 299 module will be called iuu_phoenix.o 300 301config USB_SERIAL_KEYSPAN_PDA 302 tristate "USB Keyspan PDA Single Port Serial Driver" 303 select USB_EZUSB_FX2 304 help 305 Say Y here if you want to use a Keyspan PDA single port USB to 306 serial converter device. This driver makes use of firmware 307 developed from scratch by Brian Warner. 308 309 To compile this driver as a module, choose M here: the 310 module will be called keyspan_pda. 311 312config USB_SERIAL_KEYSPAN 313 tristate "USB Keyspan USA-xxx Serial Driver" 314 select USB_EZUSB_FX2 315 ---help--- 316 Say Y here if you want to use Keyspan USB to serial converter 317 devices. This driver makes use of Keyspan's official firmware 318 and was developed with their support. You must also include 319 firmware to support your particular device(s). 320 321 See <http://blemings.org/hugh/keyspan.html> for more information. 322 323 To compile this driver as a module, choose M here: the 324 module will be called keyspan. 325 326config USB_SERIAL_KLSI 327 tristate "USB KL5KUSB105 (Palmconnect) Driver" 328 ---help--- 329 Say Y here if you want to use a KL5KUSB105 - based single port 330 serial adapter. The most widely known -- and currently the only 331 tested -- device in this category is the PalmConnect USB Serial 332 adapter sold by Palm Inc. for use with their Palm III and Palm V 333 series PDAs. 334 335 Please read <file:Documentation/usb/usb-serial.txt> for more 336 information. 337 338 To compile this driver as a module, choose M here: the 339 module will be called kl5kusb105. 340 341config USB_SERIAL_KOBIL_SCT 342 tristate "USB KOBIL chipcard reader" 343 ---help--- 344 Say Y here if you want to use one of the following KOBIL USB chipcard 345 readers: 346 347 - USB TWIN 348 - KAAN Standard Plus 349 - KAAN SIM 350 - SecOVID Reader Plus 351 - B1 Professional 352 - KAAN Professional 353 354 Note that you need a current CT-API. 355 To compile this driver as a module, choose M here: the 356 module will be called kobil_sct. 357 358config USB_SERIAL_MCT_U232 359 tristate "USB MCT Single Port Serial Driver" 360 ---help--- 361 Say Y here if you want to use a USB Serial single port adapter from 362 Magic Control Technology Corp. (U232 is one of the model numbers). 363 364 This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB 365 BAY, Belkin F5U109, and Belkin F5U409 devices. 366 367 To compile this driver as a module, choose M here: the 368 module will be called mct_u232. 369 370config USB_SERIAL_METRO 371 tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" 372 ---help--- 373 Say Y here if you want to use a USB POS Metrologic barcode scanner. 374 375 To compile this driver as a module, choose M here: the 376 module will be called metro-usb. 377 378config USB_SERIAL_MOS7720 379 tristate "USB Moschip 7720 Serial Driver" 380 ---help--- 381 Say Y here if you want to use USB Serial single and double 382 port adapters from Moschip Semiconductor Tech. 383 384 To compile this driver as a module, choose M here: the 385 module will be called mos7720. 386 387config USB_SERIAL_MOS7715_PARPORT 388 bool "Support for parallel port on the Moschip 7715" 389 depends on USB_SERIAL_MOS7720 390 depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 391 select PARPORT_NOT_PC 392 ---help--- 393 Say Y if you have a Moschip 7715 device and would like to use 394 the parallel port it provides. The port will register with 395 the parport subsystem as a low-level driver. 396 397config USB_SERIAL_MOS7840 398 tristate "USB Moschip 7840/7820 USB Serial Driver" 399 ---help--- 400 Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 401 Dual-Serial port device from MosChip Semiconductor. 402 403 The MCS7840 and MCS7820 have been developed to connect a wide range 404 of standard serial devices to a USB host. The MCS7840 has a USB 405 device controller connected to four (4) individual UARTs while the 406 MCS7820 controller connects to two (2) individual UARTs. 407 408 To compile this driver as a module, choose M here: the 409 module will be called mos7840. If unsure, choose N. 410 411config USB_SERIAL_MXUPORT 412 tristate "USB Moxa UPORT Serial Driver" 413 ---help--- 414 Say Y here if you want to use a MOXA UPort Serial hub. 415 416 This driver supports: 417 418 [2 Port] 419 - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub 420 - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with 421 Isolation 422 423 [4 Port] 424 - UPort 1410 : 4 Port RS-232 USB to Serial Hub 425 - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub 426 - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with 427 Isolation 428 429 [8 Port] 430 - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub 431 - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub 432 433 [16 Port] 434 - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub 435 - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub 436 437 To compile this driver as a module, choose M here: the 438 module will be called mxuport. 439 440config USB_SERIAL_NAVMAN 441 tristate "USB Navman GPS device" 442 help 443 To compile this driver as a module, choose M here: the 444 module will be called navman. 445 446config USB_SERIAL_PL2303 447 tristate "USB Prolific 2303 Single Port Serial Driver" 448 help 449 Say Y here if you want to use the PL2303 USB Serial single port 450 adapter from Prolific. 451 452 To compile this driver as a module, choose M here: the 453 module will be called pl2303. 454 455config USB_SERIAL_OTI6858 456 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" 457 help 458 Say Y here if you want to use the OTi-6858 single port USB to serial 459 converter device. 460 461 To compile this driver as a module, choose M here: the 462 module will be called oti6858. 463 464config USB_SERIAL_QCAUX 465 tristate "USB Qualcomm Auxiliary Serial Port Driver" 466 help 467 Say Y here if you want to use the auxiliary serial ports provided 468 by many modems based on Qualcomm chipsets. These ports often use 469 a proprietary protocol called DM and cannot be used for AT- or 470 PPP-based communication. 471 472 To compile this driver as a module, choose M here: the 473 module will be called qcaux. If unsure, choose N. 474 475config USB_SERIAL_QUALCOMM 476 tristate "USB Qualcomm Serial modem" 477 select USB_SERIAL_WWAN 478 help 479 Say Y here if you have a Qualcomm USB modem device. These are 480 usually wireless cellular modems. 481 482 To compile this driver as a module, choose M here: the 483 module will be called qcserial. 484 485config USB_SERIAL_SPCP8X5 486 tristate "USB SPCP8x5 USB To Serial Driver" 487 help 488 Say Y here if you want to use the spcp8x5 converter chip. This is 489 commonly found in some Z-Wave USB devices. 490 491 To compile this driver as a module, choose M here: the 492 module will be called spcp8x5. 493 494config USB_SERIAL_SAFE 495 tristate "USB Safe Serial (Encapsulated) Driver" 496 497config USB_SERIAL_SAFE_PADDED 498 bool "USB Secure Encapsulated Driver - Padded" 499 depends on USB_SERIAL_SAFE 500 501config USB_SERIAL_SIERRAWIRELESS 502 tristate "USB Sierra Wireless Driver" 503 help 504 Say M here if you want to use Sierra Wireless devices. 505 506 Many devices have a feature known as TRU-Install. For those devices 507 to work properly, the USB Storage Sierra feature must be enabled. 508 509 To compile this driver as a module, choose M here: the 510 module will be called sierra. 511 512config USB_SERIAL_SYMBOL 513 tristate "USB Symbol Barcode driver (serial mode)" 514 help 515 Say Y here if you want to use a Symbol USB Barcode device 516 in serial emulation mode. 517 518 To compile this driver as a module, choose M here: the 519 module will be called symbolserial. 520 521config USB_SERIAL_TI 522 tristate "USB TI 3410/5052 Serial Driver" 523 help 524 Say Y here if you want to use the TI USB 3410 or 5052 525 serial devices. 526 527 To compile this driver as a module, choose M here: the 528 module will be called ti_usb_3410_5052. 529 530config USB_SERIAL_CYBERJACK 531 tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" 532 ---help--- 533 Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard 534 reader. This is an interface to ISO 7816 compatible contact-based 535 chipcards, e.g. GSM SIMs. 536 537 To compile this driver as a module, choose M here: the 538 module will be called cyberjack. 539 540 If unsure, say N. 541 542config USB_SERIAL_XIRCOM 543 tristate "USB Xircom / Entrega Single Port Serial Driver" 544 select USB_EZUSB_FX2 545 help 546 Say Y here if you want to use a Xircom or Entrega single port USB to 547 serial converter device. This driver makes use of firmware 548 developed from scratch by Brian Warner. 549 550 To compile this driver as a module, choose M here: the 551 module will be called keyspan_pda. 552 553config USB_SERIAL_WWAN 554 tristate 555 556config USB_SERIAL_OPTION 557 tristate "USB driver for GSM and CDMA modems" 558 select USB_SERIAL_WWAN 559 help 560 Say Y here if you have a GSM or CDMA modem that's connected to USB. 561 562 This driver also supports several PCMCIA cards which have a 563 built-in OHCI-USB adapter and an internally-connected GSM modem. 564 The USB bus on these cards is not accessible externally. 565 566 Supported devices include (some of?) those made by: 567 Option, Huawei, Audiovox, Novatel Wireless, or Anydata. 568 569 To compile this driver as a module, choose M here: the 570 module will be called option. 571 572 If this driver doesn't recognize your device, 573 it might be accessible via the FTDI_SIO driver. 574 575config USB_SERIAL_OMNINET 576 tristate "USB ZyXEL omni.net LCD Plus Driver" 577 help 578 Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. 579 580 To compile this driver as a module, choose M here: the 581 module will be called omninet. 582 583config USB_SERIAL_OPTICON 584 tristate "USB Opticon Barcode driver (serial mode)" 585 help 586 Say Y here if you want to use a Opticon USB Barcode device 587 in serial emulation mode. 588 589 To compile this driver as a module, choose M here: the 590 module will be called opticon. 591 592config USB_SERIAL_XSENS_MT 593 tristate "Xsens motion tracker serial interface driver" 594 help 595 Say Y here if you want to use Xsens motion trackers. 596 597 This driver supports the new generation of motion trackers 598 by Xsens. Older devices can be accessed using the FTDI_SIO 599 driver. 600 601 To compile this driver as a module, choose M here: the 602 module will be called xsens_mt. 603 604config USB_SERIAL_WISHBONE 605 tristate "USB-Wishbone adapter interface driver" 606 help 607 Say Y here if you want to use a USB attached Wishbone bus. 608 609 Wishbone is an open hardware SoC bus commonly used in FPGA 610 designs. Bus access can be serialized using the Etherbone 611 protocol <http://www.ohwr.org/projects/etherbone-core>. 612 613 This driver is intended to be used with devices which attach 614 their internal Wishbone bus to a USB serial interface using 615 the Etherbone protocol. A userspace library is required to 616 speak the protocol made available by this driver as ttyUSBx. 617 618 To compile this driver as a module, choose M here: the 619 module will be called wishbone-serial. 620 621config USB_SERIAL_SSU100 622 tristate "USB Quatech SSU-100 Single Port Serial Driver" 623 help 624 Say Y here if you want to use the Quatech SSU-100 single 625 port usb to serial adapter. 626 627 To compile this driver as a module, choose M here: the 628 module will be called ssu100. 629 630config USB_SERIAL_QT2 631 tristate "USB Quatech Serial Driver for USB 2 devices" 632 help 633 Say Y here if you want to use the Quatech USB 2 634 serial adapters. 635 636 To compile this driver as a module, choose M here: the 637 module will be called quatech-serial. 638 639config USB_SERIAL_UPD78F0730 640 tristate "USB Renesas uPD78F0730 Single Port Serial Driver" 641 help 642 Say Y here if you want to use the Renesas uPD78F0730 643 serial driver. 644 645 To compile this driver as a module, choose M here: the 646 module will be called upd78f0730. 647 648config USB_SERIAL_DEBUG 649 tristate "USB Debugging Device" 650 help 651 Say Y here if you have a USB debugging device used to receive 652 debugging data from another machine. The most common of these 653 devices is the NetChip TurboCONNECT device. 654 655 To compile this driver as a module, choose M here: the 656 module will be called usb-debug. 657 658endif # USB_SERIAL 659