xref: /openbmc/linux/drivers/usb/serial/Kconfig (revision 9ac8d3fb)
1#
2# USB Serial device configuration
3#
4
5menuconfig USB_SERIAL
6	tristate "USB Serial Converter support"
7	depends on USB
8	---help---
9	  Say Y here if you have a USB device that provides normal serial
10	  ports, or acts like a serial device, and you want to connect it to
11	  your USB bus.
12
13	  Please read <file:Documentation/usb/usb-serial.txt> for more
14	  information on the specifics of the different devices that are
15	  supported, and on how to use them.
16
17	  To compile this driver as a module, choose M here: the
18	  module will be called usbserial.
19
20if USB_SERIAL
21
22config USB_SERIAL_CONSOLE
23	bool "USB Serial Console device support"
24	depends on USB_SERIAL=y
25	---help---
26	  If you say Y here, it will be possible to use a USB to serial
27	  converter port as the system console (the system console is the
28	  device which receives all kernel messages and warnings and which
29	  allows logins in single user mode). This could be useful if some
30	  terminal or printer is connected to that serial port.
31
32	  Even if you say Y here, the currently visible virtual console
33	  (/dev/tty0) will still be used as the system console by default, but
34	  you can alter that using a kernel command line option such as
35	  "console=ttyUSB0". (Try "man bootparam" or see the documentation of
36	  your boot loader (lilo or loadlin) about how to pass options to the
37	  kernel at boot time.)
38
39	  If you don't have a VGA card installed and you say Y here, the
40	  kernel will automatically use the first USB to serial converter
41	  port, /dev/ttyUSB0, as system console.
42
43	  If unsure, say N.
44
45config USB_EZUSB
46	bool "Functions for loading firmware on EZUSB chips"
47	help
48	    Say Y here if you need EZUSB device support.
49
50config USB_SERIAL_GENERIC
51	bool "USB Generic Serial Driver"
52	help
53	  Say Y here if you want to use the generic USB serial driver.  Please
54	  read <file:Documentation/usb/usb-serial.txt> for more information on
55	  using this driver.  It is recommended that the "USB Serial converter
56	  support" be compiled as a module for this driver to be used
57	  properly.
58
59config USB_SERIAL_AIRCABLE
60	tristate "USB AIRcable Bluetooth Dongle Driver"
61	help
62	    Say Y here if you want to use USB AIRcable Bluetooth Dongle.
63
64	    To compile this driver as a module, choose M here: the module
65	    will be called aircable.
66
67config USB_SERIAL_ARK3116
68	tristate "USB ARK Micro 3116 USB Serial Driver"
69	help
70	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
71	  device.
72
73	  To compile this driver as a module, choose M here: the
74	  module will be called ark3116
75
76config USB_SERIAL_BELKIN
77	tristate "USB Belkin and Peracom Single Port Serial Driver"
78	help
79	  Say Y here if you want to use a Belkin USB Serial single port
80	  adaptor (F5U103 is one of the model numbers) or the Peracom single
81	  port USB to serial adapter.
82
83	  To compile this driver as a module, choose M here: the
84	  module will be called belkin_sa.
85
86config USB_SERIAL_CH341
87	tristate "USB Winchiphead CH341 Single Port Serial Driver"
88	help
89	  Say Y here if you want to use a Winchiphead CH341 single port
90	  USB to serial adapter.
91
92	  To compile this driver as a module, choose M here: the
93	  module will be called ch341.
94
95config USB_SERIAL_WHITEHEAT
96	tristate "USB ConnectTech WhiteHEAT Serial Driver"
97	select USB_EZUSB
98	help
99	  Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
100	  USB to serial converter device.
101
102	  To compile this driver as a module, choose M here: the
103	  module will be called whiteheat.
104
105config USB_SERIAL_DIGI_ACCELEPORT
106	tristate "USB Digi International AccelePort USB Serial Driver"
107	---help---
108	  Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
109	  2 port (plus parallel port) and 4 port USB serial converters.  The
110	  parallel port on the USB 2 appears as a third serial port on Linux.
111	  The Digi Acceleport USB 8 is not yet supported by this driver.
112
113	  This driver works under SMP with the usb-uhci driver.  It does not
114	  work under SMP with the uhci driver.
115
116	  To compile this driver as a module, choose M here: the
117	  module will be called digi_acceleport.
118
119config USB_SERIAL_CP2101
120	tristate "USB CP2101 UART Bridge Controller"
121	help
122	  Say Y here if you want to use a CP2101/CP2102 based USB to RS232
123	  converter.
124
125	  To compile this driver as a module, choose M here: the
126	  module will be called cp2101.
127
128config USB_SERIAL_CYPRESS_M8
129	tristate "USB Cypress M8 USB Serial Driver"
130	help
131	  Say Y here if you want to use a device that contains the Cypress
132	  USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
133
134		Attempted SMP support... send bug reports!
135
136	  Supported microcontrollers in the CY4601 family are:
137		CY7C63741 CY7C63742 CY7C63743 CY7C64013
138
139	  To compile this driver as a module, choose M here: the
140	  module will be called cypress_m8.
141
142config USB_SERIAL_EMPEG
143	tristate "USB Empeg empeg-car Mark I/II Driver"
144	help
145	  Say Y here if you want to connect to your Empeg empeg-car Mark I/II
146	  mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
147	  device node.  See <file:Documentation/usb/usb-serial.txt> for more
148	  tidbits of information.
149
150	  To compile this driver as a module, choose M here: the
151	  module will be called empeg.
152
153config USB_SERIAL_FTDI_SIO
154	tristate "USB FTDI Single Port Serial Driver"
155	---help---
156	  Say Y here if you want to use a FTDI SIO single port USB to serial
157	  converter device. The implementation I have is called the USC-1000.
158	  This driver has also be tested with the 245 and 232 devices.
159
160	  See <http://ftdi-usb-sio.sourceforge.net/> for more
161	  information on this driver and the device.
162
163	  To compile this driver as a module, choose M here: the
164	  module will be called ftdi_sio.
165
166config USB_SERIAL_FUNSOFT
167	tristate "USB Fundamental Software Dongle Driver"
168	---help---
169	  Say Y here if you want to use the Fundamental Software dongle.
170
171	  To compile this driver as a module, choose M here: the
172	  module will be called funsoft.
173
174config USB_SERIAL_VISOR
175	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
176	help
177	  Say Y here if you want to connect to your HandSpring Visor, Palm
178	  m500 or m505 through its USB docking station. See
179	  <http://usbvisor.sourceforge.net/> for more information on using this
180	  driver.
181
182	  To compile this driver as a module, choose M here: the
183	  module will be called visor.
184
185config USB_SERIAL_IPAQ
186	tristate "USB PocketPC PDA Driver"
187	help
188	  Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
189	  or any other PDA running Windows CE 3.0 or PocketPC 2002
190	  using a USB cradle/cable. For information on using the driver,
191	  read <file:Documentation/usb/usb-serial.txt>.
192
193	  To compile this driver as a module, choose M here: the
194	  module will be called ipaq.
195
196config USB_SERIAL_IR
197	tristate "USB IR Dongle Serial Driver"
198	help
199	  Say Y here if you want to enable simple serial support for USB IrDA
200	  devices.  This is useful if you do not want to use the full IrDA
201	  stack.
202
203	  To compile this driver as a module, choose M here: the
204	  module will be called ir-usb.
205
206config USB_SERIAL_EDGEPORT
207	tristate "USB Inside Out Edgeport Serial Driver"
208	---help---
209	  Say Y here if you want to use any of the following devices from
210	  Inside Out Networks (Digi):
211	  Edgeport/4
212	  Rapidport/4
213	  Edgeport/4t
214	  Edgeport/2
215	  Edgeport/4i
216	  Edgeport/2i
217	  Edgeport/421
218	  Edgeport/21
219	  Edgeport/8
220	  Edgeport/8 Dual
221	  Edgeport/2D8
222	  Edgeport/4D8
223	  Edgeport/8i
224	  Edgeport/2 DIN
225	  Edgeport/4 DIN
226	  Edgeport/16 Dual
227
228	  To compile this driver as a module, choose M here: the
229	  module will be called io_edgeport.
230
231config USB_SERIAL_EDGEPORT_TI
232	tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
233	help
234	  Say Y here if you want to use any of the devices from Inside Out
235	  Networks (Digi) that are not supported by the io_edgeport driver.
236	  This includes the Edgeport/1 device.
237
238	  To compile this driver as a module, choose M here: the
239	  module will be called io_ti.
240
241config USB_SERIAL_GARMIN
242       tristate "USB Garmin GPS driver"
243       help
244         Say Y here if you want to connect to your Garmin GPS.
245         Should work with most Garmin GPS devices which have a native USB port.
246
247         See <http://sourceforge.net/projects/garmin-gps> for the latest
248         version of the driver.
249
250         To compile this driver as a module, choose M here: the
251         module will be called garmin_gps.
252
253config USB_SERIAL_IPW
254        tristate "USB IPWireless (3G UMTS TDD) Driver"
255	help
256	  Say Y here if you want to use a IPWireless USB modem such as
257	  the ones supplied by Axity3G/Sentech South Africa.
258
259	  To compile this driver as a module, choose M here: the
260	  module will be called ipw.
261
262config USB_SERIAL_IUU
263	tristate "USB Infinity USB Unlimited Phoenix Driver"
264	help
265	  Say Y here if you want to use a IUU in phoenix mode and get
266	  an extra ttyUSBx device. More information available on
267	  http://eczema.ecze.com/iuu_phoenix.html
268
269	  To compile this driver as a module, choose M here: the
270	  module will be called iuu_phoenix.o
271
272config USB_SERIAL_KEYSPAN_PDA
273	tristate "USB Keyspan PDA Single Port Serial Driver"
274	select USB_EZUSB
275	help
276	  Say Y here if you want to use a Keyspan PDA single port USB to
277	  serial converter device.  This driver makes use of firmware
278	  developed from scratch by Brian Warner.
279
280	  To compile this driver as a module, choose M here: the
281	  module will be called keyspan_pda.
282
283config USB_SERIAL_KEYSPAN
284	tristate "USB Keyspan USA-xxx Serial Driver"
285	select USB_EZUSB
286	---help---
287	  Say Y here if you want to use Keyspan USB to serial converter
288	  devices.  This driver makes use of Keyspan's official firmware
289	  and was developed with their support.  You must also include
290	  firmware to support your particular device(s).
291
292	  See <http://misc.nu/hugh/keyspan.html> for more information.
293
294	  To compile this driver as a module, choose M here: the
295	  module will be called keyspan.
296
297config USB_SERIAL_KEYSPAN_MPR
298	bool "USB Keyspan MPR Firmware"
299	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
300	help
301	  Say Y here to include firmware for the Keyspan MPR converter.
302
303config USB_SERIAL_KEYSPAN_USA28
304	bool "USB Keyspan USA-28 Firmware"
305	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
306	help
307	  Say Y here to include firmware for the USA-28 converter.
308
309config USB_SERIAL_KEYSPAN_USA28X
310	bool "USB Keyspan USA-28X Firmware"
311	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
312	help
313	  Say Y here to include firmware for the USA-28X converter.
314	  Be sure you have a USA-28X, there are also 28XA and 28XB
315	  models, the label underneath has the actual part number.
316
317config USB_SERIAL_KEYSPAN_USA28XA
318	bool "USB Keyspan USA-28XA Firmware"
319	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
320	help
321	  Say Y here to include firmware for the USA-28XA converter.
322	  Be sure you have a USA-28XA, there are also 28X and 28XB
323	  models, the label underneath has the actual part number.
324
325config USB_SERIAL_KEYSPAN_USA28XB
326	bool "USB Keyspan USA-28XB Firmware"
327	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328	help
329	  Say Y here to include firmware for the USA-28XB converter.
330	  Be sure you have a USA-28XB, there are also 28X and 28XA
331	  models, the label underneath has the actual part number.
332
333config USB_SERIAL_KEYSPAN_USA19
334	bool "USB Keyspan USA-19 Firmware"
335	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
336	help
337	  Say Y here to include firmware for the USA-19 converter.
338
339config USB_SERIAL_KEYSPAN_USA18X
340	bool "USB Keyspan USA-18X Firmware"
341	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
342	help
343	  Say Y here to include firmware for the USA-18X converter.
344
345config USB_SERIAL_KEYSPAN_USA19W
346	bool "USB Keyspan USA-19W Firmware"
347	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348	help
349	  Say Y here to include firmware for the USA-19W converter.
350
351config USB_SERIAL_KEYSPAN_USA19QW
352	bool "USB Keyspan USA-19QW Firmware"
353	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
354	help
355	  Say Y here to include firmware for the USA-19QW converter.
356
357config USB_SERIAL_KEYSPAN_USA19QI
358	bool "USB Keyspan USA-19QI Firmware"
359	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
360	help
361	  Say Y here to include firmware for the USA-19QI converter.
362
363config USB_SERIAL_KEYSPAN_USA49W
364	bool "USB Keyspan USA-49W Firmware"
365	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
366	help
367	  Say Y here to include firmware for the USA-49W converter.
368
369config USB_SERIAL_KEYSPAN_USA49WLC
370	bool "USB Keyspan USA-49WLC Firmware"
371	depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
372	help
373	  Say Y here to include firmware for the USA-49WLC converter.
374
375config USB_SERIAL_KLSI
376	tristate "USB KL5KUSB105 (Palmconnect) Driver"
377	---help---
378	  Say Y here if you want to use a KL5KUSB105 - based single port
379	  serial adapter. The most widely known -- and currently the only
380	  tested -- device in this category is the PalmConnect USB Serial
381	  adapter sold by Palm Inc. for use with their Palm III and Palm V
382	  series PDAs.
383
384	  Please read <file:Documentation/usb/usb-serial.txt> for more
385	  information.
386
387	  To compile this driver as a module, choose M here: the
388	  module will be called kl5kusb105.
389
390config USB_SERIAL_KOBIL_SCT
391        tristate "USB KOBIL chipcard reader"
392        ---help---
393          Say Y here if you want to use one of the following KOBIL USB chipcard
394          readers:
395
396            - USB TWIN
397            - KAAN Standard Plus
398            - KAAN SIM
399            - SecOVID Reader Plus
400            - B1 Professional
401            - KAAN Professional
402
403          Note that you need a current CT-API.
404          To compile this driver as a module, choose M here: the
405	  module will be called kobil_sct.
406
407config USB_SERIAL_MCT_U232
408	tristate "USB MCT Single Port Serial Driver"
409	---help---
410	  Say Y here if you want to use a USB Serial single port adapter from
411	  Magic Control Technology Corp. (U232 is one of the model numbers).
412
413	  This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
414	  BAY, Belkin F5U109, and Belkin F5U409 devices.
415
416	  To compile this driver as a module, choose M here: the
417	  module will be called mct_u232.
418
419config USB_SERIAL_MOS7720
420	tristate "USB Moschip 7720 Serial Driver"
421	---help---
422	  Say Y here if you want to use USB Serial single and double
423	  port adapters from Moschip Semiconductor Tech.
424
425	  To compile this driver as a module, choose M here: the
426	  module will be called mos7720.
427
428config USB_SERIAL_MOS7840
429	tristate "USB Moschip 7840/7820 USB Serial Driver"
430	---help---
431	  Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
432	  Dual-Serial port device from MosChip Semiconductor.
433
434	  The MCS7840 and MCS7820 have been developed to connect a wide range
435	  of standard serial devices to a USB host.  The MCS7840 has a USB
436	  device controller connected to four (4) individual UARTs while the
437	  MCS7820 controller connects to two (2) individual UARTs.
438
439	  To compile this driver as a module, choose M here: the
440	  module will be called mos7840.  If unsure, choose N.
441
442config USB_SERIAL_MOTOROLA
443	tristate "USB Motorola Phone modem driver"
444	---help---
445	  Say Y here if you want to use a Motorola phone with a USB
446	  connector as a modem link.
447
448	  To compile this driver as a module, choose M here: the
449	  module will be called moto_modem.  If unsure, choose N.
450
451config USB_SERIAL_NAVMAN
452	tristate "USB Navman GPS device"
453	help
454	  To compile this driver as a module, choose M here: the
455	  module will be called navman.
456
457config USB_SERIAL_PL2303
458	tristate "USB Prolific 2303 Single Port Serial Driver"
459	help
460	  Say Y here if you want to use the PL2303 USB Serial single port
461	  adapter from Prolific.
462
463	  To compile this driver as a module, choose M here: the
464	  module will be called pl2303.
465
466config USB_SERIAL_OTI6858
467	tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
468	help
469	  Say Y here if you want to use the OTi-6858 single port USB to serial
470          converter device.
471
472	  To compile this driver as a module, choose M here: the
473	  module will be called oti6858.
474
475config USB_SERIAL_SPCP8X5
476	tristate "USB SPCP8x5 USB To Serial Driver"
477	help
478	  Say Y here if you want to use the spcp8x5 converter chip.  This is
479	  commonly found in some Z-Wave USB devices.
480
481	  To compile this driver as a module, choose M here: the
482	  module will be called spcp8x5.
483
484config USB_SERIAL_HP4X
485        tristate "USB HP4x Calculators support"
486        help
487          Say Y here if you want to use an Hewlett-Packard 4x Calculator.
488
489          To compile this driver as a module, choose M here: the
490          module will be called hp4x.
491
492config USB_SERIAL_SAFE
493	tristate "USB Safe Serial (Encapsulated) Driver"
494
495config USB_SERIAL_SAFE_PADDED
496	bool "USB Secure Encapsulated Driver - Padded"
497	depends on USB_SERIAL_SAFE
498
499config USB_SERIAL_SIERRAWIRELESS
500	tristate "USB Sierra Wireless Driver"
501	help
502	  Say M here if you want to use Sierra Wireless devices.
503
504	  Many deviecs have a feature known as TRU-Install, for those devices
505	  to work properly the USB Storage Sierra feature must be enabled.
506
507	  To compile this driver as a module, choose M here: the
508	  module will be called sierra.
509
510config USB_SERIAL_TI
511	tristate "USB TI 3410/5052 Serial Driver"
512	help
513	  Say Y here if you want to use the TI USB 3410 or 5052
514	  serial devices.
515
516	  To compile this driver as a module, choose M here: the
517	  module will be called ti_usb_3410_5052.
518
519config USB_SERIAL_CYBERJACK
520	tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
521	---help---
522	  Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
523	  reader. This is an interface to ISO 7816 compatible contact-based
524	  chipcards, e.g. GSM SIMs.
525
526	  To compile this driver as a module, choose M here: the
527	  module will be called cyberjack.
528
529	  If unsure, say N.
530
531config USB_SERIAL_XIRCOM
532	tristate "USB Xircom / Entregra Single Port Serial Driver"
533	select USB_EZUSB
534	help
535	  Say Y here if you want to use a Xircom or Entregra single port USB to
536	  serial converter device.  This driver makes use of firmware
537	  developed from scratch by Brian Warner.
538
539	  To compile this driver as a module, choose M here: the
540	  module will be called keyspan_pda.
541
542config USB_SERIAL_OPTION
543	tristate "USB driver for GSM and CDMA modems"
544	help
545	  Say Y here if you have a GSM or CDMA modem that's connected to USB.
546
547	  This driver also supports several PCMCIA cards which have a
548	  built-in OHCI-USB adapter and an internally-connected GSM modem.
549	  The USB bus on these cards is not accessible externally.
550
551	  Supported devices include (some of?) those made by:
552	  Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
553
554	  To compile this driver as a module, choose M here: the
555	  module will be called option.
556
557	  If this driver doesn't recognize your device,
558	  it might be accessible via the FTDI_SIO driver.
559
560config USB_SERIAL_OMNINET
561	tristate "USB ZyXEL omni.net LCD Plus Driver"
562	help
563	  Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
564
565	  To compile this driver as a module, choose M here: the
566	  module will be called omninet.
567
568config USB_SERIAL_DEBUG
569	tristate "USB Debugging Device"
570	help
571	  Say Y here if you have a USB debugging device used to receive
572	  debugging data from another machine.  The most common of these
573	  devices is the NetChip TurboCONNECT device.
574
575	  To compile this driver as a module, choose M here: the
576	  module will be called usb-debug.
577
578endif # USB_SERIAL
579