1 /* 2 * Renesas USB driver 3 * 4 * Copyright (C) 2011 Renesas Solutions Corp. 5 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> 6 * 7 * This program is distributed in the hope that it will be useful, 8 * but WITHOUT ANY WARRANTY; without even the implied warranty of 9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 * GNU General Public License for more details. 11 * 12 * You should have received a copy of the GNU General Public License 13 * along with this program; if not, write to the Free Software 14 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 15 * 16 */ 17 #include <linux/interrupt.h> 18 19 #include "common.h" 20 #include "mod.h" 21 22 #define usbhs_priv_to_modinfo(priv) (&priv->mod_info) 23 #define usbhs_mod_info_call(priv, func, param...) \ 24 ({ \ 25 struct usbhs_mod_info *info; \ 26 info = usbhs_priv_to_modinfo(priv); \ 27 !info->func ? 0 : \ 28 info->func(param); \ 29 }) 30 31 /* 32 * autonomy 33 * 34 * these functions are used if platform doesn't have external phy. 35 * -> there is no "notify_hotplug" callback from platform 36 * -> call "notify_hotplug" by itself 37 * -> use own interrupt to connect/disconnect 38 * -> it mean module clock is always ON 39 * ~~~~~~~~~~~~~~~~~~~~~~~~~ 40 */ 41 static int usbhsm_autonomy_get_vbus(struct platform_device *pdev) 42 { 43 struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); 44 45 return VBSTS & usbhs_read(priv, INTSTS0); 46 } 47 48 static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv, 49 struct usbhs_irq_state *irq_state) 50 { 51 struct platform_device *pdev = usbhs_priv_to_pdev(priv); 52 53 renesas_usbhs_call_notify_hotplug(pdev); 54 55 return 0; 56 } 57 58 void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) 59 { 60 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 61 62 info->irq_vbus = usbhsm_autonomy_irq_vbus; 63 priv->pfunc.get_vbus = usbhsm_autonomy_get_vbus; 64 65 usbhs_irq_callback_update(priv, NULL); 66 } 67 68 /* 69 * host / gadget functions 70 * 71 * renesas_usbhs host/gadget can register itself by below functions. 72 * these functions are called when probe 73 * 74 */ 75 void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id) 76 { 77 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 78 79 info->mod[id] = mod; 80 mod->priv = priv; 81 } 82 83 struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id) 84 { 85 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 86 struct usbhs_mod *ret = NULL; 87 88 switch (id) { 89 case USBHS_HOST: 90 case USBHS_GADGET: 91 ret = info->mod[id]; 92 break; 93 } 94 95 return ret; 96 } 97 98 int usbhs_mod_is_host(struct usbhs_priv *priv) 99 { 100 struct usbhs_mod *mod = usbhs_mod_get_current(priv); 101 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 102 103 if (!mod) 104 return -EINVAL; 105 106 return info->mod[USBHS_HOST] == mod; 107 } 108 109 struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv) 110 { 111 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 112 113 return info->curt; 114 } 115 116 int usbhs_mod_change(struct usbhs_priv *priv, int id) 117 { 118 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 119 struct usbhs_mod *mod = NULL; 120 int ret = 0; 121 122 /* id < 0 mean no current */ 123 switch (id) { 124 case USBHS_HOST: 125 case USBHS_GADGET: 126 mod = info->mod[id]; 127 break; 128 default: 129 ret = -EINVAL; 130 } 131 info->curt = mod; 132 133 return ret; 134 } 135 136 static irqreturn_t usbhs_interrupt(int irq, void *data); 137 int usbhs_mod_probe(struct usbhs_priv *priv) 138 { 139 struct device *dev = usbhs_priv_to_dev(priv); 140 int ret; 141 142 /* 143 * install host/gadget driver 144 */ 145 ret = usbhs_mod_host_probe(priv); 146 if (ret < 0) 147 return ret; 148 149 ret = usbhs_mod_gadget_probe(priv); 150 if (ret < 0) 151 goto mod_init_host_err; 152 153 /* irq settings */ 154 ret = request_irq(priv->irq, usbhs_interrupt, 155 priv->irqflags, dev_name(dev), priv); 156 if (ret) { 157 dev_err(dev, "irq request err\n"); 158 goto mod_init_gadget_err; 159 } 160 161 return ret; 162 163 mod_init_gadget_err: 164 usbhs_mod_gadget_remove(priv); 165 mod_init_host_err: 166 usbhs_mod_host_remove(priv); 167 168 return ret; 169 } 170 171 void usbhs_mod_remove(struct usbhs_priv *priv) 172 { 173 usbhs_mod_host_remove(priv); 174 usbhs_mod_gadget_remove(priv); 175 free_irq(priv->irq, priv); 176 } 177 178 /* 179 * status functions 180 */ 181 int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state) 182 { 183 int state = irq_state->intsts0 & DVSQ_MASK; 184 185 switch (state) { 186 case POWER_STATE: 187 case DEFAULT_STATE: 188 case ADDRESS_STATE: 189 case CONFIGURATION_STATE: 190 return state; 191 } 192 193 return -EIO; 194 } 195 196 int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state) 197 { 198 /* 199 * return value 200 * 201 * IDLE_SETUP_STAGE 202 * READ_DATA_STAGE 203 * READ_STATUS_STAGE 204 * WRITE_DATA_STAGE 205 * WRITE_STATUS_STAGE 206 * NODATA_STATUS_STAGE 207 * SEQUENCE_ERROR 208 */ 209 return (int)irq_state->intsts0 & CTSQ_MASK; 210 } 211 212 static int usbhs_status_get_each_irq(struct usbhs_priv *priv, 213 struct usbhs_irq_state *state) 214 { 215 struct usbhs_mod *mod = usbhs_mod_get_current(priv); 216 u16 intenb0, intenb1; 217 218 state->intsts0 = usbhs_read(priv, INTSTS0); 219 state->intsts1 = usbhs_read(priv, INTSTS1); 220 221 intenb0 = usbhs_read(priv, INTENB0); 222 intenb1 = usbhs_read(priv, INTENB1); 223 224 /* mask */ 225 if (mod) { 226 state->brdysts = usbhs_read(priv, BRDYSTS); 227 state->nrdysts = usbhs_read(priv, NRDYSTS); 228 state->bempsts = usbhs_read(priv, BEMPSTS); 229 230 state->bempsts &= mod->irq_bempsts; 231 state->brdysts &= mod->irq_brdysts; 232 } 233 234 /* 235 * Check whether the irq enable registers and the irq status are set 236 * when IRQF_SHARED is set. 237 */ 238 if (priv->irqflags & IRQF_SHARED) { 239 if (!(intenb0 & state->intsts0) && 240 !(intenb1 & state->intsts1) && 241 !(state->bempsts) && 242 !(state->brdysts)) 243 return -EIO; 244 } 245 246 return 0; 247 } 248 249 /* 250 * interrupt 251 */ 252 #define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */ 253 #define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */ 254 static irqreturn_t usbhs_interrupt(int irq, void *data) 255 { 256 struct usbhs_priv *priv = data; 257 struct usbhs_irq_state irq_state; 258 259 if (usbhs_status_get_each_irq(priv, &irq_state) < 0) 260 return IRQ_NONE; 261 262 /* 263 * clear interrupt 264 * 265 * The hardware is _very_ picky to clear interrupt bit. 266 * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value. 267 * 268 * see 269 * "Operation" 270 * - "Control Transfer (DCP)" 271 * - Function :: VALID bit should 0 272 */ 273 usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); 274 usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); 275 276 usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); 277 usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); 278 usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); 279 280 /* 281 * call irq callback functions 282 * see also 283 * usbhs_irq_setting_update 284 */ 285 286 /* INTSTS0 */ 287 if (irq_state.intsts0 & VBINT) 288 usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state); 289 290 if (irq_state.intsts0 & DVST) 291 usbhs_mod_call(priv, irq_dev_state, priv, &irq_state); 292 293 if (irq_state.intsts0 & CTRT) 294 usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state); 295 296 if (irq_state.intsts0 & BEMP) 297 usbhs_mod_call(priv, irq_empty, priv, &irq_state); 298 299 if (irq_state.intsts0 & BRDY) 300 usbhs_mod_call(priv, irq_ready, priv, &irq_state); 301 302 /* INTSTS1 */ 303 if (irq_state.intsts1 & ATTCH) 304 usbhs_mod_call(priv, irq_attch, priv, &irq_state); 305 306 if (irq_state.intsts1 & DTCH) 307 usbhs_mod_call(priv, irq_dtch, priv, &irq_state); 308 309 if (irq_state.intsts1 & SIGN) 310 usbhs_mod_call(priv, irq_sign, priv, &irq_state); 311 312 if (irq_state.intsts1 & SACK) 313 usbhs_mod_call(priv, irq_sack, priv, &irq_state); 314 315 return IRQ_HANDLED; 316 } 317 318 void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) 319 { 320 u16 intenb0 = 0; 321 u16 intenb1 = 0; 322 struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); 323 324 /* 325 * BEMPENB/BRDYENB are picky. 326 * below method is required 327 * 328 * - clear INTSTS0 329 * - update BEMPENB/BRDYENB 330 * - update INTSTS0 331 */ 332 usbhs_write(priv, INTENB0, 0); 333 usbhs_write(priv, INTENB1, 0); 334 335 usbhs_write(priv, BEMPENB, 0); 336 usbhs_write(priv, BRDYENB, 0); 337 338 /* 339 * see also 340 * usbhs_interrupt 341 */ 342 343 /* 344 * it don't enable DVSE (intenb0) here 345 * but "mod->irq_dev_state" will be called. 346 */ 347 if (info->irq_vbus) 348 intenb0 |= VBSE; 349 350 if (mod) { 351 /* 352 * INTSTS0 353 */ 354 if (mod->irq_ctrl_stage) 355 intenb0 |= CTRE; 356 357 if (mod->irq_empty && mod->irq_bempsts) { 358 usbhs_write(priv, BEMPENB, mod->irq_bempsts); 359 intenb0 |= BEMPE; 360 } 361 362 if (mod->irq_ready && mod->irq_brdysts) { 363 usbhs_write(priv, BRDYENB, mod->irq_brdysts); 364 intenb0 |= BRDYE; 365 } 366 367 /* 368 * INTSTS1 369 */ 370 if (mod->irq_attch) 371 intenb1 |= ATTCHE; 372 373 if (mod->irq_dtch) 374 intenb1 |= DTCHE; 375 376 if (mod->irq_sign) 377 intenb1 |= SIGNE; 378 379 if (mod->irq_sack) 380 intenb1 |= SACKE; 381 } 382 383 if (intenb0) 384 usbhs_write(priv, INTENB0, intenb0); 385 386 if (intenb1) 387 usbhs_write(priv, INTENB1, intenb1); 388 } 389