1 // SPDX-License-Identifier: GPL-1.0+ 2 /* 3 * Renesas USB driver 4 * 5 * Copyright (C) 2011 Renesas Solutions Corp. 6 * Copyright (C) 2019 Renesas Electronics Corporation 7 * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> 8 */ 9 #ifndef RENESAS_USB_DRIVER_H 10 #define RENESAS_USB_DRIVER_H 11 12 #include <linux/clk.h> 13 #include <linux/extcon.h> 14 #include <linux/platform_device.h> 15 #include <linux/reset.h> 16 #include <linux/usb/renesas_usbhs.h> 17 18 struct usbhs_priv; 19 20 #include "mod.h" 21 #include "pipe.h" 22 23 /* 24 * 25 * register define 26 * 27 */ 28 #define SYSCFG 0x0000 29 #define BUSWAIT 0x0002 30 #define DVSTCTR 0x0008 31 #define TESTMODE 0x000C 32 #define CFIFO 0x0014 33 #define CFIFOSEL 0x0020 34 #define CFIFOCTR 0x0022 35 #define D0FIFO 0x0100 36 #define D0FIFOSEL 0x0028 37 #define D0FIFOCTR 0x002A 38 #define D1FIFO 0x0120 39 #define D1FIFOSEL 0x002C 40 #define D1FIFOCTR 0x002E 41 #define INTENB0 0x0030 42 #define INTENB1 0x0032 43 #define BRDYENB 0x0036 44 #define NRDYENB 0x0038 45 #define BEMPENB 0x003A 46 #define INTSTS0 0x0040 47 #define INTSTS1 0x0042 48 #define BRDYSTS 0x0046 49 #define NRDYSTS 0x0048 50 #define BEMPSTS 0x004A 51 #define FRMNUM 0x004C 52 #define USBREQ 0x0054 /* USB request type register */ 53 #define USBVAL 0x0056 /* USB request value register */ 54 #define USBINDX 0x0058 /* USB request index register */ 55 #define USBLENG 0x005A /* USB request length register */ 56 #define DCPCFG 0x005C 57 #define DCPMAXP 0x005E 58 #define DCPCTR 0x0060 59 #define PIPESEL 0x0064 60 #define PIPECFG 0x0068 61 #define PIPEBUF 0x006A 62 #define PIPEMAXP 0x006C 63 #define PIPEPERI 0x006E 64 #define PIPEnCTR 0x0070 65 #define PIPE1TRE 0x0090 66 #define PIPE1TRN 0x0092 67 #define PIPE2TRE 0x0094 68 #define PIPE2TRN 0x0096 69 #define PIPE3TRE 0x0098 70 #define PIPE3TRN 0x009A 71 #define PIPE4TRE 0x009C 72 #define PIPE4TRN 0x009E 73 #define PIPE5TRE 0x00A0 74 #define PIPE5TRN 0x00A2 75 #define PIPEBTRE 0x00A4 76 #define PIPEBTRN 0x00A6 77 #define PIPECTRE 0x00A8 78 #define PIPECTRN 0x00AA 79 #define PIPEDTRE 0x00AC 80 #define PIPEDTRN 0x00AE 81 #define PIPEETRE 0x00B0 82 #define PIPEETRN 0x00B2 83 #define PIPEFTRE 0x00B4 84 #define PIPEFTRN 0x00B6 85 #define PIPE9TRE 0x00B8 86 #define PIPE9TRN 0x00BA 87 #define PIPEATRE 0x00BC 88 #define PIPEATRN 0x00BE 89 #define DEVADD0 0x00D0 /* Device address n configuration */ 90 #define DEVADD1 0x00D2 91 #define DEVADD2 0x00D4 92 #define DEVADD3 0x00D6 93 #define DEVADD4 0x00D8 94 #define DEVADD5 0x00DA 95 #define DEVADD6 0x00DC 96 #define DEVADD7 0x00DE 97 #define DEVADD8 0x00E0 98 #define DEVADD9 0x00E2 99 #define DEVADDA 0x00E4 100 #define D2FIFOSEL 0x00F0 /* for R-Car Gen2 */ 101 #define D2FIFOCTR 0x00F2 /* for R-Car Gen2 */ 102 #define D3FIFOSEL 0x00F4 /* for R-Car Gen2 */ 103 #define D3FIFOCTR 0x00F6 /* for R-Car Gen2 */ 104 #define SUSPMODE 0x0102 /* for RZ/A */ 105 106 /* SYSCFG */ 107 #define SCKE (1 << 10) /* USB Module Clock Enable */ 108 #define CNEN (1 << 8) /* Single-ended receiver operation Enable */ 109 #define HSE (1 << 7) /* High-Speed Operation Enable */ 110 #define DCFM (1 << 6) /* Controller Function Select */ 111 #define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ 112 #define DPRPU (1 << 4) /* D+ Line Resistance Control */ 113 #define USBE (1 << 0) /* USB Module Operation Enable */ 114 #define UCKSEL (1 << 2) /* Clock Select for RZ/A1 */ 115 #define UPLLE (1 << 1) /* USB PLL Enable for RZ/A1 */ 116 117 /* DVSTCTR */ 118 #define EXTLP (1 << 10) /* Controls the EXTLP pin output state */ 119 #define PWEN (1 << 9) /* Controls the PWEN pin output state */ 120 #define USBRST (1 << 6) /* Bus Reset Output */ 121 #define UACT (1 << 4) /* USB Bus Enable */ 122 #define RHST (0x7) /* Reset Handshake */ 123 #define RHST_LOW_SPEED 1 /* Low-speed connection */ 124 #define RHST_FULL_SPEED 2 /* Full-speed connection */ 125 #define RHST_HIGH_SPEED 3 /* High-speed connection */ 126 127 /* CFIFOSEL */ 128 #define DREQE (1 << 12) /* DMA Transfer Request Enable */ 129 #define MBW_32 (0x2 << 10) /* CFIFO Port Access Bit Width */ 130 131 /* CFIFOCTR */ 132 #define BVAL (1 << 15) /* Buffer Memory Enable Flag */ 133 #define BCLR (1 << 14) /* CPU buffer clear */ 134 #define FRDY (1 << 13) /* FIFO Port Ready */ 135 #define DTLN_MASK (0x0FFF) /* Receive Data Length */ 136 137 /* INTENB0 */ 138 #define VBSE (1 << 15) /* Enable IRQ VBUS_0 and VBUSIN_0 */ 139 #define RSME (1 << 14) /* Enable IRQ Resume */ 140 #define SOFE (1 << 13) /* Enable IRQ Frame Number Update */ 141 #define DVSE (1 << 12) /* Enable IRQ Device State Transition */ 142 #define CTRE (1 << 11) /* Enable IRQ Control Stage Transition */ 143 #define BEMPE (1 << 10) /* Enable IRQ Buffer Empty */ 144 #define NRDYE (1 << 9) /* Enable IRQ Buffer Not Ready Response */ 145 #define BRDYE (1 << 8) /* Enable IRQ Buffer Ready */ 146 147 /* INTENB1 */ 148 #define BCHGE (1 << 14) /* USB Bus Change Interrupt Enable */ 149 #define DTCHE (1 << 12) /* Disconnection Detect Interrupt Enable */ 150 #define ATTCHE (1 << 11) /* Connection Detect Interrupt Enable */ 151 #define EOFERRE (1 << 6) /* EOF Error Detect Interrupt Enable */ 152 #define SIGNE (1 << 5) /* Setup Transaction Error Interrupt Enable */ 153 #define SACKE (1 << 4) /* Setup Transaction ACK Interrupt Enable */ 154 155 /* INTSTS0 */ 156 #define VBINT (1 << 15) /* VBUS0_0 and VBUS1_0 Interrupt Status */ 157 #define DVST (1 << 12) /* Device State Transition Interrupt Status */ 158 #define CTRT (1 << 11) /* Control Stage Interrupt Status */ 159 #define BEMP (1 << 10) /* Buffer Empty Interrupt Status */ 160 #define BRDY (1 << 8) /* Buffer Ready Interrupt Status */ 161 #define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */ 162 #define VALID (1 << 3) /* USB Request Receive */ 163 164 #define DVSQ_MASK (0x7 << 4) /* Device State */ 165 #define POWER_STATE (0 << 4) 166 #define DEFAULT_STATE (1 << 4) 167 #define ADDRESS_STATE (2 << 4) 168 #define CONFIGURATION_STATE (3 << 4) 169 #define SUSPENDED_STATE (4 << 4) 170 171 #define CTSQ_MASK (0x7) /* Control Transfer Stage */ 172 #define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */ 173 #define READ_DATA_STAGE 1 /* Control read data stage */ 174 #define READ_STATUS_STAGE 2 /* Control read status stage */ 175 #define WRITE_DATA_STAGE 3 /* Control write data stage */ 176 #define WRITE_STATUS_STAGE 4 /* Control write status stage */ 177 #define NODATA_STATUS_STAGE 5 /* Control write NoData status stage */ 178 #define SEQUENCE_ERROR 6 /* Control transfer sequence error */ 179 180 /* INTSTS1 */ 181 #define OVRCR (1 << 15) /* OVRCR Interrupt Status */ 182 #define BCHG (1 << 14) /* USB Bus Change Interrupt Status */ 183 #define DTCH (1 << 12) /* USB Disconnection Detect Interrupt Status */ 184 #define ATTCH (1 << 11) /* ATTCH Interrupt Status */ 185 #define EOFERR (1 << 6) /* EOF Error Detect Interrupt Status */ 186 #define SIGN (1 << 5) /* Setup Transaction Error Interrupt Status */ 187 #define SACK (1 << 4) /* Setup Transaction ACK Response Interrupt Status */ 188 189 /* PIPECFG */ 190 /* DCPCFG */ 191 #define TYPE_NONE (0 << 14) /* Transfer Type */ 192 #define TYPE_BULK (1 << 14) 193 #define TYPE_INT (2 << 14) 194 #define TYPE_ISO (3 << 14) 195 #define BFRE (1 << 10) /* BRDY Interrupt Operation Spec. */ 196 #define DBLB (1 << 9) /* Double Buffer Mode */ 197 #define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ 198 #define DIR_OUT (1 << 4) /* Transfer Direction */ 199 200 /* PIPEMAXP */ 201 /* DCPMAXP */ 202 #define DEVSEL_MASK (0xF << 12) /* Device Select */ 203 #define DCP_MAXP_MASK (0x7F) 204 #define PIPE_MAXP_MASK (0x7FF) 205 206 /* PIPEBUF */ 207 #define BUFSIZE_SHIFT 10 208 #define BUFSIZE_MASK (0x1F << BUFSIZE_SHIFT) 209 #define BUFNMB_MASK (0xFF) 210 211 /* PIPEnCTR */ 212 /* DCPCTR */ 213 #define BSTS (1 << 15) /* Buffer Status */ 214 #define SUREQ (1 << 14) /* Sending SETUP Token */ 215 #define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */ 216 #define CSSTS (1 << 12) /* CSSTS Status */ 217 #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ 218 #define SQCLR (1 << 8) /* Toggle Bit Clear */ 219 #define SQSET (1 << 7) /* Toggle Bit Set */ 220 #define SQMON (1 << 6) /* Toggle Bit Check */ 221 #define PBUSY (1 << 5) /* Pipe Busy */ 222 #define PID_MASK (0x3) /* Response PID */ 223 #define PID_NAK 0 224 #define PID_BUF 1 225 #define PID_STALL10 2 226 #define PID_STALL11 3 227 228 #define CCPL (1 << 2) /* Control Transfer End Enable */ 229 230 /* PIPEnTRE */ 231 #define TRENB (1 << 9) /* Transaction Counter Enable */ 232 #define TRCLR (1 << 8) /* Transaction Counter Clear */ 233 234 /* FRMNUM */ 235 #define FRNM_MASK (0x7FF) 236 237 /* DEVADDn */ 238 #define UPPHUB(x) (((x) & 0xF) << 11) /* HUB Register */ 239 #define HUBPORT(x) (((x) & 0x7) << 8) /* HUB Port for Target Device */ 240 #define USBSPD(x) (((x) & 0x3) << 6) /* Device Transfer Rate */ 241 #define USBSPD_SPEED_LOW 0x1 242 #define USBSPD_SPEED_FULL 0x2 243 #define USBSPD_SPEED_HIGH 0x3 244 245 /* SUSPMODE */ 246 #define SUSPM (1 << 14) /* SuspendM Control */ 247 248 /* 249 * struct 250 */ 251 struct usbhs_priv { 252 253 void __iomem *base; 254 unsigned int irq; 255 unsigned long irqflags; 256 257 const struct renesas_usbhs_platform_callback *pfunc; 258 struct renesas_usbhs_driver_param dparam; 259 260 struct delayed_work notify_hotplug_work; 261 struct platform_device *pdev; 262 263 struct extcon_dev *edev; 264 265 spinlock_t lock; 266 267 /* 268 * module control 269 */ 270 struct usbhs_mod_info mod_info; 271 272 /* 273 * pipe control 274 */ 275 struct usbhs_pipe_info pipe_info; 276 277 /* 278 * fifo control 279 */ 280 struct usbhs_fifo_info fifo_info; 281 282 struct phy *phy; 283 struct reset_control *rsts; 284 struct clk *clks[2]; 285 }; 286 287 /* 288 * common 289 */ 290 u16 usbhs_read(struct usbhs_priv *priv, u32 reg); 291 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data); 292 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); 293 294 #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f) 295 #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f) 296 297 int usbhs_get_id_as_gadget(struct platform_device *pdev); 298 299 /* 300 * sysconfig 301 */ 302 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); 303 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); 304 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable); 305 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode); 306 307 /* 308 * usb request 309 */ 310 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); 311 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); 312 313 /* 314 * bus 315 */ 316 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); 317 void usbhs_bus_send_reset(struct usbhs_priv *priv); 318 int usbhs_bus_get_speed(struct usbhs_priv *priv); 319 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); 320 int usbhsc_schedule_notify_hotplug(struct platform_device *pdev); 321 322 /* 323 * frame 324 */ 325 int usbhs_frame_get_num(struct usbhs_priv *priv); 326 327 /* 328 * device config 329 */ 330 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub, 331 u16 hubport, u16 speed); 332 333 /* 334 * interrupt functions 335 */ 336 void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit); 337 338 /* 339 * data 340 */ 341 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); 342 #define usbhs_get_dparam(priv, param) (priv->dparam.param) 343 #define usbhs_priv_to_pdev(priv) (priv->pdev) 344 #define usbhs_priv_to_dev(priv) (&priv->pdev->dev) 345 #define usbhs_priv_to_lock(priv) (&priv->lock) 346 347 #endif /* RENESAS_USB_DRIVER_H */ 348