1 // SPDX-License-Identifier: GPL-1.0+
2 /*
3  * Renesas USB driver
4  *
5  * Copyright (C) 2011 Renesas Solutions Corp.
6  * Copyright (C) 2019 Renesas Electronics Corporation
7  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
8  */
9 #ifndef RENESAS_USB_DRIVER_H
10 #define RENESAS_USB_DRIVER_H
11 
12 #include <linux/clk.h>
13 #include <linux/extcon.h>
14 #include <linux/platform_device.h>
15 #include <linux/reset.h>
16 #include <linux/usb/renesas_usbhs.h>
17 
18 struct usbhs_priv;
19 
20 #include "mod.h"
21 #include "pipe.h"
22 
23 /*
24  *
25  *		register define
26  *
27  */
28 #define SYSCFG		0x0000
29 #define BUSWAIT		0x0002
30 #define DVSTCTR		0x0008
31 #define TESTMODE	0x000C
32 #define CFIFO		0x0014
33 #define CFIFOSEL	0x0020
34 #define CFIFOCTR	0x0022
35 #define D0FIFO		0x0100
36 #define D0FIFOSEL	0x0028
37 #define D0FIFOCTR	0x002A
38 #define D1FIFO		0x0120
39 #define D1FIFOSEL	0x002C
40 #define D1FIFOCTR	0x002E
41 #define INTENB0		0x0030
42 #define INTENB1		0x0032
43 #define BRDYENB		0x0036
44 #define NRDYENB		0x0038
45 #define BEMPENB		0x003A
46 #define INTSTS0		0x0040
47 #define INTSTS1		0x0042
48 #define BRDYSTS		0x0046
49 #define NRDYSTS		0x0048
50 #define BEMPSTS		0x004A
51 #define FRMNUM		0x004C
52 #define USBREQ		0x0054	/* USB request type register */
53 #define USBVAL		0x0056	/* USB request value register */
54 #define USBINDX		0x0058	/* USB request index register */
55 #define USBLENG		0x005A	/* USB request length register */
56 #define DCPCFG		0x005C
57 #define DCPMAXP		0x005E
58 #define DCPCTR		0x0060
59 #define PIPESEL		0x0064
60 #define PIPECFG		0x0068
61 #define PIPEBUF		0x006A
62 #define PIPEMAXP	0x006C
63 #define PIPEPERI	0x006E
64 #define PIPEnCTR	0x0070
65 #define PIPE1TRE	0x0090
66 #define PIPE1TRN	0x0092
67 #define PIPE2TRE	0x0094
68 #define PIPE2TRN	0x0096
69 #define PIPE3TRE	0x0098
70 #define PIPE3TRN	0x009A
71 #define PIPE4TRE	0x009C
72 #define PIPE4TRN	0x009E
73 #define PIPE5TRE	0x00A0
74 #define PIPE5TRN	0x00A2
75 #define PIPEBTRE	0x00A4
76 #define PIPEBTRN	0x00A6
77 #define PIPECTRE	0x00A8
78 #define PIPECTRN	0x00AA
79 #define PIPEDTRE	0x00AC
80 #define PIPEDTRN	0x00AE
81 #define PIPEETRE	0x00B0
82 #define PIPEETRN	0x00B2
83 #define PIPEFTRE	0x00B4
84 #define PIPEFTRN	0x00B6
85 #define PIPE9TRE	0x00B8
86 #define PIPE9TRN	0x00BA
87 #define PIPEATRE	0x00BC
88 #define PIPEATRN	0x00BE
89 #define DEVADD0		0x00D0 /* Device address n configuration */
90 #define DEVADD1		0x00D2
91 #define DEVADD2		0x00D4
92 #define DEVADD3		0x00D6
93 #define DEVADD4		0x00D8
94 #define DEVADD5		0x00DA
95 #define DEVADD6		0x00DC
96 #define DEVADD7		0x00DE
97 #define DEVADD8		0x00E0
98 #define DEVADD9		0x00E2
99 #define DEVADDA		0x00E4
100 #define D2FIFOSEL	0x00F0	/* for R-Car Gen2 */
101 #define D2FIFOCTR	0x00F2	/* for R-Car Gen2 */
102 #define D3FIFOSEL	0x00F4	/* for R-Car Gen2 */
103 #define D3FIFOCTR	0x00F6	/* for R-Car Gen2 */
104 #define SUSPMODE	0x0102	/* for RZ/A */
105 
106 /* SYSCFG */
107 #define SCKE	(1 << 10)	/* USB Module Clock Enable */
108 #define CNEN	(1 << 8)	/* Single-ended receiver operation Enable */
109 #define HSE	(1 << 7)	/* High-Speed Operation Enable */
110 #define DCFM	(1 << 6)	/* Controller Function Select */
111 #define DRPD	(1 << 5)	/* D+ Line/D- Line Resistance Control */
112 #define DPRPU	(1 << 4)	/* D+ Line Resistance Control */
113 #define USBE	(1 << 0)	/* USB Module Operation Enable */
114 #define UCKSEL	(1 << 2)	/* Clock Select for RZ/A1 */
115 #define UPLLE	(1 << 1)	/* USB PLL Enable for RZ/A1 */
116 
117 /* DVSTCTR */
118 #define EXTLP	(1 << 10)	/* Controls the EXTLP pin output state */
119 #define PWEN	(1 << 9)	/* Controls the PWEN pin output state */
120 #define USBRST	(1 << 6)	/* Bus Reset Output */
121 #define UACT	(1 << 4)	/* USB Bus Enable */
122 #define RHST	(0x7)		/* Reset Handshake */
123 #define  RHST_LOW_SPEED  1	/* Low-speed connection */
124 #define  RHST_FULL_SPEED 2	/* Full-speed connection */
125 #define  RHST_HIGH_SPEED 3	/* High-speed connection */
126 
127 /* CFIFOSEL */
128 #define DREQE	(1 << 12)	/* DMA Transfer Request Enable */
129 #define MBW_32	(0x2 << 10)	/* CFIFO Port Access Bit Width */
130 
131 /* CFIFOCTR */
132 #define BVAL	(1 << 15)	/* Buffer Memory Enable Flag */
133 #define BCLR	(1 << 14)	/* CPU buffer clear */
134 #define FRDY	(1 << 13)	/* FIFO Port Ready */
135 #define DTLN_MASK (0x0FFF)	/* Receive Data Length */
136 
137 /* INTENB0 */
138 #define VBSE	(1 << 15)	/* Enable IRQ VBUS_0 and VBUSIN_0 */
139 #define RSME	(1 << 14)	/* Enable IRQ Resume */
140 #define SOFE	(1 << 13)	/* Enable IRQ Frame Number Update */
141 #define DVSE	(1 << 12)	/* Enable IRQ Device State Transition */
142 #define CTRE	(1 << 11)	/* Enable IRQ Control Stage Transition */
143 #define BEMPE	(1 << 10)	/* Enable IRQ Buffer Empty */
144 #define NRDYE	(1 << 9)	/* Enable IRQ Buffer Not Ready Response */
145 #define BRDYE	(1 << 8)	/* Enable IRQ Buffer Ready */
146 
147 /* INTENB1 */
148 #define BCHGE	(1 << 14)	/* USB Bus Change Interrupt Enable */
149 #define DTCHE	(1 << 12)	/* Disconnection Detect Interrupt Enable */
150 #define ATTCHE	(1 << 11)	/* Connection Detect Interrupt Enable */
151 #define EOFERRE	(1 << 6)	/* EOF Error Detect Interrupt Enable */
152 #define SIGNE	(1 << 5)	/* Setup Transaction Error Interrupt Enable */
153 #define SACKE	(1 << 4)	/* Setup Transaction ACK Interrupt Enable */
154 
155 /* INTSTS0 */
156 #define VBINT	(1 << 15)	/* VBUS0_0 and VBUS1_0 Interrupt Status */
157 #define DVST	(1 << 12)	/* Device State Transition Interrupt Status */
158 #define CTRT	(1 << 11)	/* Control Stage Interrupt Status */
159 #define BEMP	(1 << 10)	/* Buffer Empty Interrupt Status */
160 #define BRDY	(1 << 8)	/* Buffer Ready Interrupt Status */
161 #define VBSTS	(1 << 7)	/* VBUS_0 and VBUSIN_0 Input Status */
162 #define VALID	(1 << 3)	/* USB Request Receive */
163 
164 #define DVSQ_MASK		(0x7 << 4)	/* Device State */
165 #define  POWER_STATE		(0 << 4)
166 #define  DEFAULT_STATE		(1 << 4)
167 #define  ADDRESS_STATE		(2 << 4)
168 #define  CONFIGURATION_STATE	(3 << 4)
169 #define  SUSPENDED_STATE	(4 << 4)
170 
171 #define CTSQ_MASK		(0x7)	/* Control Transfer Stage */
172 #define  IDLE_SETUP_STAGE	0	/* Idle stage or setup stage */
173 #define  READ_DATA_STAGE	1	/* Control read data stage */
174 #define  READ_STATUS_STAGE	2	/* Control read status stage */
175 #define  WRITE_DATA_STAGE	3	/* Control write data stage */
176 #define  WRITE_STATUS_STAGE	4	/* Control write status stage */
177 #define  NODATA_STATUS_STAGE	5	/* Control write NoData status stage */
178 #define  SEQUENCE_ERROR		6	/* Control transfer sequence error */
179 
180 /* INTSTS1 */
181 #define OVRCR	(1 << 15) /* OVRCR Interrupt Status */
182 #define BCHG	(1 << 14) /* USB Bus Change Interrupt Status */
183 #define DTCH	(1 << 12) /* USB Disconnection Detect Interrupt Status */
184 #define ATTCH	(1 << 11) /* ATTCH Interrupt Status */
185 #define EOFERR	(1 << 6)  /* EOF Error Detect Interrupt Status */
186 #define SIGN	(1 << 5)  /* Setup Transaction Error Interrupt Status */
187 #define SACK	(1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
188 
189 /* PIPECFG */
190 /* DCPCFG */
191 #define TYPE_NONE	(0 << 14)	/* Transfer Type */
192 #define TYPE_BULK	(1 << 14)
193 #define TYPE_INT	(2 << 14)
194 #define TYPE_ISO	(3 << 14)
195 #define BFRE		(1 << 10)	/* BRDY Interrupt Operation Spec. */
196 #define DBLB		(1 << 9)	/* Double Buffer Mode */
197 #define SHTNAK		(1 << 7)	/* Pipe Disable in Transfer End */
198 #define DIR_OUT		(1 << 4)	/* Transfer Direction */
199 
200 /* PIPEMAXP */
201 /* DCPMAXP */
202 #define DEVSEL_MASK	(0xF << 12)	/* Device Select */
203 #define DCP_MAXP_MASK	(0x7F)
204 #define PIPE_MAXP_MASK	(0x7FF)
205 
206 /* PIPEBUF */
207 #define BUFSIZE_SHIFT	10
208 #define BUFSIZE_MASK	(0x1F << BUFSIZE_SHIFT)
209 #define BUFNMB_MASK	(0xFF)
210 
211 /* PIPEnCTR */
212 /* DCPCTR */
213 #define BSTS		(1 << 15)	/* Buffer Status */
214 #define SUREQ		(1 << 14)	/* Sending SETUP Token */
215 #define INBUFM		(1 << 14)	/* (PIPEnCTR) Transfer Buffer Monitor */
216 #define CSSTS		(1 << 12)	/* CSSTS Status */
217 #define	ACLRM		(1 << 9)	/* Buffer Auto-Clear Mode */
218 #define SQCLR		(1 << 8)	/* Toggle Bit Clear */
219 #define SQSET		(1 << 7)	/* Toggle Bit Set */
220 #define SQMON		(1 << 6)	/* Toggle Bit Check */
221 #define PBUSY		(1 << 5)	/* Pipe Busy */
222 #define PID_MASK	(0x3)		/* Response PID */
223 #define  PID_NAK	0
224 #define  PID_BUF	1
225 #define  PID_STALL10	2
226 #define  PID_STALL11	3
227 
228 #define CCPL		(1 << 2)	/* Control Transfer End Enable */
229 
230 /* PIPEnTRE */
231 #define TRENB		(1 << 9)	/* Transaction Counter Enable */
232 #define TRCLR		(1 << 8)	/* Transaction Counter Clear */
233 
234 /* FRMNUM */
235 #define FRNM_MASK	(0x7FF)
236 
237 /* DEVADDn */
238 #define UPPHUB(x)	(((x) & 0xF) << 11)	/* HUB Register */
239 #define HUBPORT(x)	(((x) & 0x7) << 8)	/* HUB Port for Target Device */
240 #define USBSPD(x)	(((x) & 0x3) << 6)	/* Device Transfer Rate */
241 #define USBSPD_SPEED_LOW	0x1
242 #define USBSPD_SPEED_FULL	0x2
243 #define USBSPD_SPEED_HIGH	0x3
244 
245 /* SUSPMODE */
246 #define SUSPM		(1 << 14)	/* SuspendM Control */
247 
248 /*
249  *		struct
250  */
251 struct usbhs_priv {
252 
253 	void __iomem *base;
254 	unsigned int irq;
255 	unsigned long irqflags;
256 
257 	const struct renesas_usbhs_platform_callback *pfunc;
258 	struct renesas_usbhs_driver_param	dparam;
259 
260 	struct delayed_work notify_hotplug_work;
261 	struct platform_device *pdev;
262 
263 	struct extcon_dev *edev;
264 
265 	spinlock_t		lock;
266 
267 	/*
268 	 * module control
269 	 */
270 	struct usbhs_mod_info mod_info;
271 
272 	/*
273 	 * pipe control
274 	 */
275 	struct usbhs_pipe_info pipe_info;
276 
277 	/*
278 	 * fifo control
279 	 */
280 	struct usbhs_fifo_info fifo_info;
281 
282 	struct phy *phy;
283 	struct reset_control *rsts;
284 	struct clk *clks[2];
285 };
286 
287 /*
288  * common
289  */
290 u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
291 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
292 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
293 
294 #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
295 #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
296 
297 int usbhs_get_id_as_gadget(struct platform_device *pdev);
298 
299 /*
300  * sysconfig
301  */
302 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
303 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
304 void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable);
305 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
306 
307 /*
308  * usb request
309  */
310 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
311 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
312 
313 /*
314  * bus
315  */
316 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
317 void usbhs_bus_send_reset(struct usbhs_priv *priv);
318 int usbhs_bus_get_speed(struct usbhs_priv *priv);
319 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
320 int usbhsc_schedule_notify_hotplug(struct platform_device *pdev);
321 
322 /*
323  * frame
324  */
325 int usbhs_frame_get_num(struct usbhs_priv *priv);
326 
327 /*
328  * device config
329  */
330 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
331 			   u16 hubport, u16 speed);
332 
333 /*
334  * interrupt functions
335  */
336 void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit);
337 
338 /*
339  * data
340  */
341 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
342 #define usbhs_get_dparam(priv, param)	(priv->dparam.param)
343 #define usbhs_priv_to_pdev(priv)	(priv->pdev)
344 #define usbhs_priv_to_dev(priv)		(&priv->pdev->dev)
345 #define usbhs_priv_to_lock(priv)	(&priv->lock)
346 
347 #endif /* RENESAS_USB_DRIVER_H */
348