1 /*
2  * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
3  *
4  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License as published by
7  * the Free Software Foundation; either version 2 of the License, or
8  * (at your option) any later version.
9  *
10  * Author: Hema HK <hemahk@ti.com>
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  *
21  */
22 
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/interrupt.h>
26 #include <linux/platform_device.h>
27 #include <linux/io.h>
28 #include <linux/usb/musb-omap.h>
29 #include <linux/usb/phy_companion.h>
30 #include <linux/usb/omap_usb.h>
31 #include <linux/i2c/twl.h>
32 #include <linux/regulator/consumer.h>
33 #include <linux/err.h>
34 #include <linux/slab.h>
35 #include <linux/delay.h>
36 #include <linux/of.h>
37 
38 /* usb register definitions */
39 #define USB_VENDOR_ID_LSB		0x00
40 #define USB_VENDOR_ID_MSB		0x01
41 #define USB_PRODUCT_ID_LSB		0x02
42 #define USB_PRODUCT_ID_MSB		0x03
43 #define USB_VBUS_CTRL_SET		0x04
44 #define USB_VBUS_CTRL_CLR		0x05
45 #define USB_ID_CTRL_SET			0x06
46 #define USB_ID_CTRL_CLR			0x07
47 #define USB_VBUS_INT_SRC		0x08
48 #define USB_VBUS_INT_LATCH_SET		0x09
49 #define USB_VBUS_INT_LATCH_CLR		0x0A
50 #define USB_VBUS_INT_EN_LO_SET		0x0B
51 #define USB_VBUS_INT_EN_LO_CLR		0x0C
52 #define USB_VBUS_INT_EN_HI_SET		0x0D
53 #define USB_VBUS_INT_EN_HI_CLR		0x0E
54 #define USB_ID_INT_SRC			0x0F
55 #define USB_ID_INT_LATCH_SET		0x10
56 #define USB_ID_INT_LATCH_CLR		0x11
57 
58 #define USB_ID_INT_EN_LO_SET		0x12
59 #define USB_ID_INT_EN_LO_CLR		0x13
60 #define USB_ID_INT_EN_HI_SET		0x14
61 #define USB_ID_INT_EN_HI_CLR		0x15
62 #define USB_OTG_ADP_CTRL		0x16
63 #define USB_OTG_ADP_HIGH		0x17
64 #define USB_OTG_ADP_LOW			0x18
65 #define USB_OTG_ADP_RISE		0x19
66 #define USB_OTG_REVISION		0x1A
67 
68 /* to be moved to LDO */
69 #define TWL6030_MISC2			0xE5
70 #define TWL6030_CFG_LDO_PD2		0xF5
71 #define TWL6030_BACKUP_REG		0xFA
72 
73 #define STS_HW_CONDITIONS		0x21
74 
75 /* In module TWL6030_MODULE_PM_MASTER */
76 #define STS_HW_CONDITIONS		0x21
77 #define STS_USB_ID			BIT(2)
78 
79 /* In module TWL6030_MODULE_PM_RECEIVER */
80 #define VUSB_CFG_TRANS			0x71
81 #define VUSB_CFG_STATE			0x72
82 #define VUSB_CFG_VOLTAGE		0x73
83 
84 /* in module TWL6030_MODULE_MAIN_CHARGE */
85 
86 #define CHARGERUSB_CTRL1		0x8
87 
88 #define CONTROLLER_STAT1		0x03
89 #define	VBUS_DET			BIT(2)
90 
91 struct twl6030_usb {
92 	struct phy_companion	comparator;
93 	struct device		*dev;
94 
95 	/* for vbus reporting with irqs disabled */
96 	spinlock_t		lock;
97 
98 	struct regulator		*usb3v3;
99 
100 	/* used to set vbus, in atomic path */
101 	struct work_struct	set_vbus_work;
102 
103 	int			irq1;
104 	int			irq2;
105 	enum omap_musb_vbus_id_status linkstat;
106 	u8			asleep;
107 	bool			irq_enabled;
108 	bool			vbus_enable;
109 	const char		*regulator;
110 };
111 
112 #define	comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
113 
114 /*-------------------------------------------------------------------------*/
115 
116 static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
117 						u8 data, u8 address)
118 {
119 	int ret = 0;
120 
121 	ret = twl_i2c_write_u8(module, data, address);
122 	if (ret < 0)
123 		dev_err(twl->dev,
124 			"Write[0x%x] Error %d\n", address, ret);
125 	return ret;
126 }
127 
128 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
129 {
130 	u8 data;
131 	int ret;
132 
133 	ret = twl_i2c_read_u8(module, &data, address);
134 	if (ret >= 0)
135 		ret = data;
136 	else
137 		dev_err(twl->dev,
138 			"readb[0x%x,0x%x] Error %d\n",
139 					module, address, ret);
140 	return ret;
141 }
142 
143 static int twl6030_start_srp(struct phy_companion *comparator)
144 {
145 	struct twl6030_usb *twl = comparator_to_twl(comparator);
146 
147 	twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
148 	twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
149 
150 	mdelay(100);
151 	twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
152 
153 	return 0;
154 }
155 
156 static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
157 {
158 	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
159 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
160 
161 	/* Program CFG_LDO_PD2 register and set VUSB bit */
162 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
163 
164 	/* Program MISC2 register and set bit VUSB_IN_VBAT */
165 	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
166 
167 	twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
168 	if (IS_ERR(twl->usb3v3))
169 		return -ENODEV;
170 
171 	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
172 	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
173 
174 	/*
175 	 * Program the USB_ID_CTRL_SET register to enable GND drive
176 	 * and the ID comparators
177 	 */
178 	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
179 
180 	return 0;
181 }
182 
183 static ssize_t twl6030_usb_vbus_show(struct device *dev,
184 			struct device_attribute *attr, char *buf)
185 {
186 	struct twl6030_usb *twl = dev_get_drvdata(dev);
187 	unsigned long flags;
188 	int ret = -EINVAL;
189 
190 	spin_lock_irqsave(&twl->lock, flags);
191 
192 	switch (twl->linkstat) {
193 	case OMAP_MUSB_VBUS_VALID:
194 	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
195 	       break;
196 	case OMAP_MUSB_ID_GROUND:
197 	       ret = snprintf(buf, PAGE_SIZE, "id\n");
198 	       break;
199 	case OMAP_MUSB_VBUS_OFF:
200 	       ret = snprintf(buf, PAGE_SIZE, "none\n");
201 	       break;
202 	default:
203 	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
204 	}
205 	spin_unlock_irqrestore(&twl->lock, flags);
206 
207 	return ret;
208 }
209 static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
210 
211 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
212 {
213 	struct twl6030_usb *twl = _twl;
214 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
215 	u8 vbus_state, hw_state;
216 	int ret;
217 
218 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
219 
220 	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
221 						CONTROLLER_STAT1);
222 	if (!(hw_state & STS_USB_ID)) {
223 		if (vbus_state & VBUS_DET) {
224 			ret = regulator_enable(twl->usb3v3);
225 			if (ret)
226 				dev_err(twl->dev, "Failed to enable usb3v3\n");
227 
228 			twl->asleep = 1;
229 			status = OMAP_MUSB_VBUS_VALID;
230 			twl->linkstat = status;
231 			omap_musb_mailbox(status);
232 		} else {
233 			if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
234 				status = OMAP_MUSB_VBUS_OFF;
235 				twl->linkstat = status;
236 				omap_musb_mailbox(status);
237 				if (twl->asleep) {
238 					regulator_disable(twl->usb3v3);
239 					twl->asleep = 0;
240 				}
241 			}
242 		}
243 	}
244 	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
245 
246 	return IRQ_HANDLED;
247 }
248 
249 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
250 {
251 	struct twl6030_usb *twl = _twl;
252 	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
253 	u8 hw_state;
254 	int ret;
255 
256 	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
257 
258 	if (hw_state & STS_USB_ID) {
259 		ret = regulator_enable(twl->usb3v3);
260 		if (ret)
261 			dev_err(twl->dev, "Failed to enable usb3v3\n");
262 
263 		twl->asleep = 1;
264 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
265 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
266 		status = OMAP_MUSB_ID_GROUND;
267 		twl->linkstat = status;
268 		omap_musb_mailbox(status);
269 	} else  {
270 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
271 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
272 	}
273 	twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
274 
275 	return IRQ_HANDLED;
276 }
277 
278 static int twl6030_enable_irq(struct twl6030_usb *twl)
279 {
280 	twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
281 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
282 	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
283 
284 	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
285 				REG_INT_MSK_LINE_C);
286 	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
287 				REG_INT_MSK_STS_C);
288 	twl6030_usb_irq(twl->irq2, twl);
289 	twl6030_usbotg_irq(twl->irq1, twl);
290 
291 	return 0;
292 }
293 
294 static void otg_set_vbus_work(struct work_struct *data)
295 {
296 	struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
297 								set_vbus_work);
298 
299 	/*
300 	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
301 	 * register. This enables boost mode.
302 	 */
303 
304 	if (twl->vbus_enable)
305 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
306 							CHARGERUSB_CTRL1);
307 	else
308 		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
309 							CHARGERUSB_CTRL1);
310 }
311 
312 static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
313 {
314 	struct twl6030_usb *twl = comparator_to_twl(comparator);
315 
316 	twl->vbus_enable = enabled;
317 	schedule_work(&twl->set_vbus_work);
318 
319 	return 0;
320 }
321 
322 static int twl6030_usb_probe(struct platform_device *pdev)
323 {
324 	u32 ret;
325 	struct twl6030_usb	*twl;
326 	int			status, err;
327 	struct device_node	*np = pdev->dev.of_node;
328 	struct device		*dev = &pdev->dev;
329 	struct twl4030_usb_data	*pdata = dev_get_platdata(dev);
330 
331 	twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
332 	if (!twl)
333 		return -ENOMEM;
334 
335 	twl->dev		= &pdev->dev;
336 	twl->irq1		= platform_get_irq(pdev, 0);
337 	twl->irq2		= platform_get_irq(pdev, 1);
338 	twl->linkstat		= OMAP_MUSB_UNKNOWN;
339 
340 	twl->comparator.set_vbus	= twl6030_set_vbus;
341 	twl->comparator.start_srp	= twl6030_start_srp;
342 
343 	ret = omap_usb2_set_comparator(&twl->comparator);
344 	if (ret == -ENODEV) {
345 		dev_info(&pdev->dev, "phy not ready, deferring probe");
346 		return -EPROBE_DEFER;
347 	}
348 
349 	if (np) {
350 		twl->regulator = "usb";
351 	} else if (pdata) {
352 		if (pdata->features & TWL6032_SUBCLASS)
353 			twl->regulator = "ldousb";
354 		else
355 			twl->regulator = "vusb";
356 	} else {
357 		dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
358 		return -EINVAL;
359 	}
360 
361 	/* init spinlock for workqueue */
362 	spin_lock_init(&twl->lock);
363 
364 	err = twl6030_usb_ldo_init(twl);
365 	if (err) {
366 		dev_err(&pdev->dev, "ldo init failed\n");
367 		return err;
368 	}
369 
370 	platform_set_drvdata(pdev, twl);
371 	if (device_create_file(&pdev->dev, &dev_attr_vbus))
372 		dev_warn(&pdev->dev, "could not create sysfs file\n");
373 
374 	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
375 
376 	twl->irq_enabled = true;
377 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
378 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
379 			"twl6030_usb", twl);
380 	if (status < 0) {
381 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
382 			twl->irq1, status);
383 		device_remove_file(twl->dev, &dev_attr_vbus);
384 		return status;
385 	}
386 
387 	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
388 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
389 			"twl6030_usb", twl);
390 	if (status < 0) {
391 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
392 			twl->irq2, status);
393 		free_irq(twl->irq1, twl);
394 		device_remove_file(twl->dev, &dev_attr_vbus);
395 		return status;
396 	}
397 
398 	twl->asleep = 0;
399 	twl6030_enable_irq(twl);
400 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
401 
402 	return 0;
403 }
404 
405 static int twl6030_usb_remove(struct platform_device *pdev)
406 {
407 	struct twl6030_usb *twl = platform_get_drvdata(pdev);
408 
409 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
410 		REG_INT_MSK_LINE_C);
411 	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
412 			REG_INT_MSK_STS_C);
413 	free_irq(twl->irq1, twl);
414 	free_irq(twl->irq2, twl);
415 	regulator_put(twl->usb3v3);
416 	device_remove_file(twl->dev, &dev_attr_vbus);
417 	cancel_work_sync(&twl->set_vbus_work);
418 
419 	return 0;
420 }
421 
422 #ifdef CONFIG_OF
423 static const struct of_device_id twl6030_usb_id_table[] = {
424 	{ .compatible = "ti,twl6030-usb" },
425 	{}
426 };
427 MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
428 #endif
429 
430 static struct platform_driver twl6030_usb_driver = {
431 	.probe		= twl6030_usb_probe,
432 	.remove		= twl6030_usb_remove,
433 	.driver		= {
434 		.name	= "twl6030_usb",
435 		.owner	= THIS_MODULE,
436 		.of_match_table = of_match_ptr(twl6030_usb_id_table),
437 	},
438 };
439 
440 static int __init twl6030_usb_init(void)
441 {
442 	return platform_driver_register(&twl6030_usb_driver);
443 }
444 subsys_initcall(twl6030_usb_init);
445 
446 static void __exit twl6030_usb_exit(void)
447 {
448 	platform_driver_unregister(&twl6030_usb_driver);
449 }
450 module_exit(twl6030_usb_exit);
451 
452 MODULE_ALIAS("platform:twl6030_usb");
453 MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
454 MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
455 MODULE_LICENSE("GPL");
456