xref: /openbmc/linux/drivers/usb/phy/phy-tegra-usb.c (revision abfbd895)
1 /*
2  * Copyright (C) 2010 Google, Inc.
3  * Copyright (C) 2013 NVIDIA Corporation
4  *
5  * Author:
6  *	Erik Gilling <konkers@google.com>
7  *	Benoit Goby <benoit@android.com>
8  *	Venu Byravarasu <vbyravarasu@nvidia.com>
9  *
10  * This software is licensed under the terms of the GNU General Public
11  * License version 2, as published by the Free Software Foundation, and
12  * may be copied, distributed, and modified under those terms.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  */
20 
21 #include <linux/resource.h>
22 #include <linux/delay.h>
23 #include <linux/slab.h>
24 #include <linux/err.h>
25 #include <linux/export.h>
26 #include <linux/module.h>
27 #include <linux/platform_device.h>
28 #include <linux/io.h>
29 #include <linux/gpio.h>
30 #include <linux/of.h>
31 #include <linux/of_device.h>
32 #include <linux/of_gpio.h>
33 #include <linux/usb/otg.h>
34 #include <linux/usb/ulpi.h>
35 #include <linux/usb/of.h>
36 #include <linux/usb/ehci_def.h>
37 #include <linux/usb/tegra_usb_phy.h>
38 #include <linux/regulator/consumer.h>
39 
40 #define ULPI_VIEWPORT		0x170
41 
42 /* PORTSC PTS/PHCD bits, Tegra20 only */
43 #define TEGRA_USB_PORTSC1				0x184
44 #define TEGRA_USB_PORTSC1_PTS(x)			(((x) & 0x3) << 30)
45 #define TEGRA_USB_PORTSC1_PHCD				(1 << 23)
46 
47 /* HOSTPC1 PTS/PHCD bits, Tegra30 and above */
48 #define TEGRA_USB_HOSTPC1_DEVLC		0x1b4
49 #define TEGRA_USB_HOSTPC1_DEVLC_PTS(x)	(((x) & 0x7) << 29)
50 #define TEGRA_USB_HOSTPC1_DEVLC_PHCD	(1 << 22)
51 
52 /* Bits of PORTSC1, which will get cleared by writing 1 into them */
53 #define TEGRA_PORTSC1_RWC_BITS	(PORT_CSC | PORT_PEC | PORT_OCC)
54 
55 #define USB_SUSP_CTRL		0x400
56 #define   USB_WAKE_ON_CNNT_EN_DEV	(1 << 3)
57 #define   USB_WAKE_ON_DISCON_EN_DEV	(1 << 4)
58 #define   USB_SUSP_CLR		(1 << 5)
59 #define   USB_PHY_CLK_VALID	(1 << 7)
60 #define   UTMIP_RESET			(1 << 11)
61 #define   UHSIC_RESET			(1 << 11)
62 #define   UTMIP_PHY_ENABLE		(1 << 12)
63 #define   ULPI_PHY_ENABLE	(1 << 13)
64 #define   USB_SUSP_SET		(1 << 14)
65 #define   USB_WAKEUP_DEBOUNCE_COUNT(x)	(((x) & 0x7) << 16)
66 
67 #define USB1_LEGACY_CTRL	0x410
68 #define   USB1_NO_LEGACY_MODE			(1 << 0)
69 #define   USB1_VBUS_SENSE_CTL_MASK		(3 << 1)
70 #define   USB1_VBUS_SENSE_CTL_VBUS_WAKEUP	(0 << 1)
71 #define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
72 						(1 << 1)
73 #define   USB1_VBUS_SENSE_CTL_AB_SESS_VLD	(2 << 1)
74 #define   USB1_VBUS_SENSE_CTL_A_SESS_VLD	(3 << 1)
75 
76 #define ULPI_TIMING_CTRL_0	0x424
77 #define   ULPI_OUTPUT_PINMUX_BYP	(1 << 10)
78 #define   ULPI_CLKOUT_PINMUX_BYP	(1 << 11)
79 
80 #define ULPI_TIMING_CTRL_1	0x428
81 #define   ULPI_DATA_TRIMMER_LOAD	(1 << 0)
82 #define   ULPI_DATA_TRIMMER_SEL(x)	(((x) & 0x7) << 1)
83 #define   ULPI_STPDIRNXT_TRIMMER_LOAD	(1 << 16)
84 #define   ULPI_STPDIRNXT_TRIMMER_SEL(x)	(((x) & 0x7) << 17)
85 #define   ULPI_DIR_TRIMMER_LOAD		(1 << 24)
86 #define   ULPI_DIR_TRIMMER_SEL(x)	(((x) & 0x7) << 25)
87 
88 #define UTMIP_PLL_CFG1		0x804
89 #define   UTMIP_XTAL_FREQ_COUNT(x)		(((x) & 0xfff) << 0)
90 #define   UTMIP_PLLU_ENABLE_DLY_COUNT(x)	(((x) & 0x1f) << 27)
91 
92 #define UTMIP_XCVR_CFG0		0x808
93 #define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
94 #define   UTMIP_XCVR_SETUP_MSB(x)		((((x) & 0x70) >> 4) << 22)
95 #define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
96 #define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
97 #define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
98 #define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
99 #define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
100 #define   UTMIP_XCVR_LSBIAS_SEL			(1 << 21)
101 #define   UTMIP_XCVR_HSSLEW(x)			(((x) & 0x3) << 4)
102 #define   UTMIP_XCVR_HSSLEW_MSB(x)		((((x) & 0x1fc) >> 2) << 25)
103 
104 #define UTMIP_BIAS_CFG0		0x80c
105 #define   UTMIP_OTGPD			(1 << 11)
106 #define   UTMIP_BIASPD			(1 << 10)
107 #define   UTMIP_HSSQUELCH_LEVEL(x)	(((x) & 0x3) << 0)
108 #define   UTMIP_HSDISCON_LEVEL(x)	(((x) & 0x3) << 2)
109 #define   UTMIP_HSDISCON_LEVEL_MSB(x)	((((x) & 0x4) >> 2) << 24)
110 
111 #define UTMIP_HSRX_CFG0		0x810
112 #define   UTMIP_ELASTIC_LIMIT(x)	(((x) & 0x1f) << 10)
113 #define   UTMIP_IDLE_WAIT(x)		(((x) & 0x1f) << 15)
114 
115 #define UTMIP_HSRX_CFG1		0x814
116 #define   UTMIP_HS_SYNC_START_DLY(x)	(((x) & 0x1f) << 1)
117 
118 #define UTMIP_TX_CFG0		0x820
119 #define   UTMIP_FS_PREABMLE_J		(1 << 19)
120 #define   UTMIP_HS_DISCON_DISABLE	(1 << 8)
121 
122 #define UTMIP_MISC_CFG0		0x824
123 #define   UTMIP_DPDM_OBSERVE		(1 << 26)
124 #define   UTMIP_DPDM_OBSERVE_SEL(x)	(((x) & 0xf) << 27)
125 #define   UTMIP_DPDM_OBSERVE_SEL_FS_J	UTMIP_DPDM_OBSERVE_SEL(0xf)
126 #define   UTMIP_DPDM_OBSERVE_SEL_FS_K	UTMIP_DPDM_OBSERVE_SEL(0xe)
127 #define   UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
128 #define   UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
129 #define   UTMIP_SUSPEND_EXIT_ON_EDGE	(1 << 22)
130 
131 #define UTMIP_MISC_CFG1		0x828
132 #define   UTMIP_PLL_ACTIVE_DLY_COUNT(x)	(((x) & 0x1f) << 18)
133 #define   UTMIP_PLLU_STABLE_COUNT(x)	(((x) & 0xfff) << 6)
134 
135 #define UTMIP_DEBOUNCE_CFG0	0x82c
136 #define   UTMIP_BIAS_DEBOUNCE_A(x)	(((x) & 0xffff) << 0)
137 
138 #define UTMIP_BAT_CHRG_CFG0	0x830
139 #define   UTMIP_PD_CHRG			(1 << 0)
140 
141 #define UTMIP_SPARE_CFG0	0x834
142 #define   FUSE_SETUP_SEL		(1 << 3)
143 
144 #define UTMIP_XCVR_CFG1		0x838
145 #define   UTMIP_FORCE_PDDISC_POWERDOWN	(1 << 0)
146 #define   UTMIP_FORCE_PDCHRP_POWERDOWN	(1 << 2)
147 #define   UTMIP_FORCE_PDDR_POWERDOWN	(1 << 4)
148 #define   UTMIP_XCVR_TERM_RANGE_ADJ(x)	(((x) & 0xf) << 18)
149 
150 #define UTMIP_BIAS_CFG1		0x83c
151 #define   UTMIP_BIAS_PDTRK_COUNT(x)	(((x) & 0x1f) << 3)
152 
153 /* For Tegra30 and above only, the address is different in Tegra20 */
154 #define USB_USBMODE		0x1f8
155 #define   USB_USBMODE_MASK		(3 << 0)
156 #define   USB_USBMODE_HOST		(3 << 0)
157 #define   USB_USBMODE_DEVICE		(2 << 0)
158 
159 static DEFINE_SPINLOCK(utmip_pad_lock);
160 static int utmip_pad_count;
161 
162 struct tegra_xtal_freq {
163 	int freq;
164 	u8 enable_delay;
165 	u8 stable_count;
166 	u8 active_delay;
167 	u8 xtal_freq_count;
168 	u16 debounce;
169 };
170 
171 static const struct tegra_xtal_freq tegra_freq_table[] = {
172 	{
173 		.freq = 12000000,
174 		.enable_delay = 0x02,
175 		.stable_count = 0x2F,
176 		.active_delay = 0x04,
177 		.xtal_freq_count = 0x76,
178 		.debounce = 0x7530,
179 	},
180 	{
181 		.freq = 13000000,
182 		.enable_delay = 0x02,
183 		.stable_count = 0x33,
184 		.active_delay = 0x05,
185 		.xtal_freq_count = 0x7F,
186 		.debounce = 0x7EF4,
187 	},
188 	{
189 		.freq = 19200000,
190 		.enable_delay = 0x03,
191 		.stable_count = 0x4B,
192 		.active_delay = 0x06,
193 		.xtal_freq_count = 0xBB,
194 		.debounce = 0xBB80,
195 	},
196 	{
197 		.freq = 26000000,
198 		.enable_delay = 0x04,
199 		.stable_count = 0x66,
200 		.active_delay = 0x09,
201 		.xtal_freq_count = 0xFE,
202 		.debounce = 0xFDE8,
203 	},
204 };
205 
206 static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
207 {
208 	void __iomem *base = phy->regs;
209 	unsigned long val;
210 
211 	if (phy->soc_config->has_hostpc) {
212 		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
213 		val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
214 		val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
215 		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
216 	} else {
217 		val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
218 		val &= ~TEGRA_USB_PORTSC1_PTS(~0);
219 		val |= TEGRA_USB_PORTSC1_PTS(pts_val);
220 		writel(val, base + TEGRA_USB_PORTSC1);
221 	}
222 }
223 
224 static void set_phcd(struct tegra_usb_phy *phy, bool enable)
225 {
226 	void __iomem *base = phy->regs;
227 	unsigned long val;
228 
229 	if (phy->soc_config->has_hostpc) {
230 		val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
231 		if (enable)
232 			val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
233 		else
234 			val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
235 		writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
236 	} else {
237 		val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
238 		if (enable)
239 			val |= TEGRA_USB_PORTSC1_PHCD;
240 		else
241 			val &= ~TEGRA_USB_PORTSC1_PHCD;
242 		writel(val, base + TEGRA_USB_PORTSC1);
243 	}
244 }
245 
246 static int utmip_pad_open(struct tegra_usb_phy *phy)
247 {
248 	phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads");
249 	if (IS_ERR(phy->pad_clk)) {
250 		pr_err("%s: can't get utmip pad clock\n", __func__);
251 		return PTR_ERR(phy->pad_clk);
252 	}
253 
254 	return 0;
255 }
256 
257 static void utmip_pad_power_on(struct tegra_usb_phy *phy)
258 {
259 	unsigned long val, flags;
260 	void __iomem *base = phy->pad_regs;
261 	struct tegra_utmip_config *config = phy->config;
262 
263 	clk_prepare_enable(phy->pad_clk);
264 
265 	spin_lock_irqsave(&utmip_pad_lock, flags);
266 
267 	if (utmip_pad_count++ == 0) {
268 		val = readl(base + UTMIP_BIAS_CFG0);
269 		val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
270 
271 		if (phy->soc_config->requires_extra_tuning_parameters) {
272 			val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) |
273 				UTMIP_HSDISCON_LEVEL(~0) |
274 				UTMIP_HSDISCON_LEVEL_MSB(~0));
275 
276 			val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level);
277 			val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
278 			val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
279 		}
280 		writel(val, base + UTMIP_BIAS_CFG0);
281 	}
282 
283 	spin_unlock_irqrestore(&utmip_pad_lock, flags);
284 
285 	clk_disable_unprepare(phy->pad_clk);
286 }
287 
288 static int utmip_pad_power_off(struct tegra_usb_phy *phy)
289 {
290 	unsigned long val, flags;
291 	void __iomem *base = phy->pad_regs;
292 
293 	if (!utmip_pad_count) {
294 		pr_err("%s: utmip pad already powered off\n", __func__);
295 		return -EINVAL;
296 	}
297 
298 	clk_prepare_enable(phy->pad_clk);
299 
300 	spin_lock_irqsave(&utmip_pad_lock, flags);
301 
302 	if (--utmip_pad_count == 0) {
303 		val = readl(base + UTMIP_BIAS_CFG0);
304 		val |= UTMIP_OTGPD | UTMIP_BIASPD;
305 		writel(val, base + UTMIP_BIAS_CFG0);
306 	}
307 
308 	spin_unlock_irqrestore(&utmip_pad_lock, flags);
309 
310 	clk_disable_unprepare(phy->pad_clk);
311 
312 	return 0;
313 }
314 
315 static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
316 {
317 	unsigned long timeout = 2000;
318 	do {
319 		if ((readl(reg) & mask) == result)
320 			return 0;
321 		udelay(1);
322 		timeout--;
323 	} while (timeout);
324 	return -1;
325 }
326 
327 static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
328 {
329 	unsigned long val;
330 	void __iomem *base = phy->regs;
331 
332 	if (phy->is_legacy_phy) {
333 		val = readl(base + USB_SUSP_CTRL);
334 		val |= USB_SUSP_SET;
335 		writel(val, base + USB_SUSP_CTRL);
336 
337 		udelay(10);
338 
339 		val = readl(base + USB_SUSP_CTRL);
340 		val &= ~USB_SUSP_SET;
341 		writel(val, base + USB_SUSP_CTRL);
342 	} else
343 		set_phcd(phy, true);
344 
345 	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
346 		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
347 }
348 
349 static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
350 {
351 	unsigned long val;
352 	void __iomem *base = phy->regs;
353 
354 	if (phy->is_legacy_phy) {
355 		val = readl(base + USB_SUSP_CTRL);
356 		val |= USB_SUSP_CLR;
357 		writel(val, base + USB_SUSP_CTRL);
358 
359 		udelay(10);
360 
361 		val = readl(base + USB_SUSP_CTRL);
362 		val &= ~USB_SUSP_CLR;
363 		writel(val, base + USB_SUSP_CTRL);
364 	} else
365 		set_phcd(phy, false);
366 
367 	if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
368 						     USB_PHY_CLK_VALID))
369 		pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
370 }
371 
372 static int utmi_phy_power_on(struct tegra_usb_phy *phy)
373 {
374 	unsigned long val;
375 	void __iomem *base = phy->regs;
376 	struct tegra_utmip_config *config = phy->config;
377 
378 	val = readl(base + USB_SUSP_CTRL);
379 	val |= UTMIP_RESET;
380 	writel(val, base + USB_SUSP_CTRL);
381 
382 	if (phy->is_legacy_phy) {
383 		val = readl(base + USB1_LEGACY_CTRL);
384 		val |= USB1_NO_LEGACY_MODE;
385 		writel(val, base + USB1_LEGACY_CTRL);
386 	}
387 
388 	val = readl(base + UTMIP_TX_CFG0);
389 	val |= UTMIP_FS_PREABMLE_J;
390 	writel(val, base + UTMIP_TX_CFG0);
391 
392 	val = readl(base + UTMIP_HSRX_CFG0);
393 	val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
394 	val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
395 	val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
396 	writel(val, base + UTMIP_HSRX_CFG0);
397 
398 	val = readl(base + UTMIP_HSRX_CFG1);
399 	val &= ~UTMIP_HS_SYNC_START_DLY(~0);
400 	val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
401 	writel(val, base + UTMIP_HSRX_CFG1);
402 
403 	val = readl(base + UTMIP_DEBOUNCE_CFG0);
404 	val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
405 	val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
406 	writel(val, base + UTMIP_DEBOUNCE_CFG0);
407 
408 	val = readl(base + UTMIP_MISC_CFG0);
409 	val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
410 	writel(val, base + UTMIP_MISC_CFG0);
411 
412 	if (!phy->soc_config->utmi_pll_config_in_car_module) {
413 		val = readl(base + UTMIP_MISC_CFG1);
414 		val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
415 			UTMIP_PLLU_STABLE_COUNT(~0));
416 		val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
417 			UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
418 		writel(val, base + UTMIP_MISC_CFG1);
419 
420 		val = readl(base + UTMIP_PLL_CFG1);
421 		val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
422 			UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
423 		val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
424 			UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
425 		writel(val, base + UTMIP_PLL_CFG1);
426 	}
427 
428 	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
429 		val = readl(base + USB_SUSP_CTRL);
430 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
431 		writel(val, base + USB_SUSP_CTRL);
432 
433 		val = readl(base + UTMIP_BAT_CHRG_CFG0);
434 		val &= ~UTMIP_PD_CHRG;
435 		writel(val, base + UTMIP_BAT_CHRG_CFG0);
436 	} else {
437 		val = readl(base + UTMIP_BAT_CHRG_CFG0);
438 		val |= UTMIP_PD_CHRG;
439 		writel(val, base + UTMIP_BAT_CHRG_CFG0);
440 	}
441 
442 	utmip_pad_power_on(phy);
443 
444 	val = readl(base + UTMIP_XCVR_CFG0);
445 	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
446 		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
447 		 UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
448 		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0));
449 
450 	if (!config->xcvr_setup_use_fuses) {
451 		val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
452 		val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
453 	}
454 	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
455 	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
456 
457 	if (phy->soc_config->requires_extra_tuning_parameters) {
458 		val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0));
459 		val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
460 		val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
461 	}
462 	writel(val, base + UTMIP_XCVR_CFG0);
463 
464 	val = readl(base + UTMIP_XCVR_CFG1);
465 	val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
466 		 UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
467 	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
468 	writel(val, base + UTMIP_XCVR_CFG1);
469 
470 	val = readl(base + UTMIP_BIAS_CFG1);
471 	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
472 	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
473 	writel(val, base + UTMIP_BIAS_CFG1);
474 
475 	val = readl(base + UTMIP_SPARE_CFG0);
476 	if (config->xcvr_setup_use_fuses)
477 		val |= FUSE_SETUP_SEL;
478 	else
479 		val &= ~FUSE_SETUP_SEL;
480 	writel(val, base + UTMIP_SPARE_CFG0);
481 
482 	if (!phy->is_legacy_phy) {
483 		val = readl(base + USB_SUSP_CTRL);
484 		val |= UTMIP_PHY_ENABLE;
485 		writel(val, base + USB_SUSP_CTRL);
486 	}
487 
488 	val = readl(base + USB_SUSP_CTRL);
489 	val &= ~UTMIP_RESET;
490 	writel(val, base + USB_SUSP_CTRL);
491 
492 	if (phy->is_legacy_phy) {
493 		val = readl(base + USB1_LEGACY_CTRL);
494 		val &= ~USB1_VBUS_SENSE_CTL_MASK;
495 		val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
496 		writel(val, base + USB1_LEGACY_CTRL);
497 
498 		val = readl(base + USB_SUSP_CTRL);
499 		val &= ~USB_SUSP_SET;
500 		writel(val, base + USB_SUSP_CTRL);
501 	}
502 
503 	utmi_phy_clk_enable(phy);
504 
505 	if (phy->soc_config->requires_usbmode_setup) {
506 		val = readl(base + USB_USBMODE);
507 		val &= ~USB_USBMODE_MASK;
508 		if (phy->mode == USB_DR_MODE_HOST)
509 			val |= USB_USBMODE_HOST;
510 		else
511 			val |= USB_USBMODE_DEVICE;
512 		writel(val, base + USB_USBMODE);
513 	}
514 
515 	if (!phy->is_legacy_phy)
516 		set_pts(phy, 0);
517 
518 	return 0;
519 }
520 
521 static int utmi_phy_power_off(struct tegra_usb_phy *phy)
522 {
523 	unsigned long val;
524 	void __iomem *base = phy->regs;
525 
526 	utmi_phy_clk_disable(phy);
527 
528 	if (phy->mode == USB_DR_MODE_PERIPHERAL) {
529 		val = readl(base + USB_SUSP_CTRL);
530 		val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
531 		val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
532 		writel(val, base + USB_SUSP_CTRL);
533 	}
534 
535 	val = readl(base + USB_SUSP_CTRL);
536 	val |= UTMIP_RESET;
537 	writel(val, base + USB_SUSP_CTRL);
538 
539 	val = readl(base + UTMIP_BAT_CHRG_CFG0);
540 	val |= UTMIP_PD_CHRG;
541 	writel(val, base + UTMIP_BAT_CHRG_CFG0);
542 
543 	val = readl(base + UTMIP_XCVR_CFG0);
544 	val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
545 	       UTMIP_FORCE_PDZI_POWERDOWN;
546 	writel(val, base + UTMIP_XCVR_CFG0);
547 
548 	val = readl(base + UTMIP_XCVR_CFG1);
549 	val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
550 	       UTMIP_FORCE_PDDR_POWERDOWN;
551 	writel(val, base + UTMIP_XCVR_CFG1);
552 
553 	return utmip_pad_power_off(phy);
554 }
555 
556 static void utmi_phy_preresume(struct tegra_usb_phy *phy)
557 {
558 	unsigned long val;
559 	void __iomem *base = phy->regs;
560 
561 	val = readl(base + UTMIP_TX_CFG0);
562 	val |= UTMIP_HS_DISCON_DISABLE;
563 	writel(val, base + UTMIP_TX_CFG0);
564 }
565 
566 static void utmi_phy_postresume(struct tegra_usb_phy *phy)
567 {
568 	unsigned long val;
569 	void __iomem *base = phy->regs;
570 
571 	val = readl(base + UTMIP_TX_CFG0);
572 	val &= ~UTMIP_HS_DISCON_DISABLE;
573 	writel(val, base + UTMIP_TX_CFG0);
574 }
575 
576 static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
577 				   enum tegra_usb_phy_port_speed port_speed)
578 {
579 	unsigned long val;
580 	void __iomem *base = phy->regs;
581 
582 	val = readl(base + UTMIP_MISC_CFG0);
583 	val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
584 	if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
585 		val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
586 	else
587 		val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
588 	writel(val, base + UTMIP_MISC_CFG0);
589 	udelay(1);
590 
591 	val = readl(base + UTMIP_MISC_CFG0);
592 	val |= UTMIP_DPDM_OBSERVE;
593 	writel(val, base + UTMIP_MISC_CFG0);
594 	udelay(10);
595 }
596 
597 static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
598 {
599 	unsigned long val;
600 	void __iomem *base = phy->regs;
601 
602 	val = readl(base + UTMIP_MISC_CFG0);
603 	val &= ~UTMIP_DPDM_OBSERVE;
604 	writel(val, base + UTMIP_MISC_CFG0);
605 	udelay(10);
606 }
607 
608 static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
609 {
610 	int ret;
611 	unsigned long val;
612 	void __iomem *base = phy->regs;
613 
614 	ret = gpio_direction_output(phy->reset_gpio, 0);
615 	if (ret < 0) {
616 		dev_err(phy->u_phy.dev, "gpio %d not set to 0\n",
617 			phy->reset_gpio);
618 		return ret;
619 	}
620 	msleep(5);
621 	ret = gpio_direction_output(phy->reset_gpio, 1);
622 	if (ret < 0) {
623 		dev_err(phy->u_phy.dev, "gpio %d not set to 1\n",
624 			phy->reset_gpio);
625 		return ret;
626 	}
627 
628 	clk_prepare_enable(phy->clk);
629 	msleep(1);
630 
631 	val = readl(base + USB_SUSP_CTRL);
632 	val |= UHSIC_RESET;
633 	writel(val, base + USB_SUSP_CTRL);
634 
635 	val = readl(base + ULPI_TIMING_CTRL_0);
636 	val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
637 	writel(val, base + ULPI_TIMING_CTRL_0);
638 
639 	val = readl(base + USB_SUSP_CTRL);
640 	val |= ULPI_PHY_ENABLE;
641 	writel(val, base + USB_SUSP_CTRL);
642 
643 	val = 0;
644 	writel(val, base + ULPI_TIMING_CTRL_1);
645 
646 	val |= ULPI_DATA_TRIMMER_SEL(4);
647 	val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
648 	val |= ULPI_DIR_TRIMMER_SEL(4);
649 	writel(val, base + ULPI_TIMING_CTRL_1);
650 	udelay(10);
651 
652 	val |= ULPI_DATA_TRIMMER_LOAD;
653 	val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
654 	val |= ULPI_DIR_TRIMMER_LOAD;
655 	writel(val, base + ULPI_TIMING_CTRL_1);
656 
657 	/* Fix VbusInvalid due to floating VBUS */
658 	ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
659 	if (ret) {
660 		pr_err("%s: ulpi write failed\n", __func__);
661 		return ret;
662 	}
663 
664 	ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
665 	if (ret) {
666 		pr_err("%s: ulpi write failed\n", __func__);
667 		return ret;
668 	}
669 
670 	val = readl(base + USB_SUSP_CTRL);
671 	val |= USB_SUSP_CLR;
672 	writel(val, base + USB_SUSP_CTRL);
673 	udelay(100);
674 
675 	val = readl(base + USB_SUSP_CTRL);
676 	val &= ~USB_SUSP_CLR;
677 	writel(val, base + USB_SUSP_CTRL);
678 
679 	return 0;
680 }
681 
682 static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
683 {
684 	clk_disable(phy->clk);
685 	return gpio_direction_output(phy->reset_gpio, 0);
686 }
687 
688 static void tegra_usb_phy_close(struct tegra_usb_phy *phy)
689 {
690 	if (!IS_ERR(phy->vbus))
691 		regulator_disable(phy->vbus);
692 
693 	clk_disable_unprepare(phy->pll_u);
694 }
695 
696 static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
697 {
698 	if (phy->is_ulpi_phy)
699 		return ulpi_phy_power_on(phy);
700 	else
701 		return utmi_phy_power_on(phy);
702 }
703 
704 static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
705 {
706 	if (phy->is_ulpi_phy)
707 		return ulpi_phy_power_off(phy);
708 	else
709 		return utmi_phy_power_off(phy);
710 }
711 
712 static int	tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
713 {
714 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
715 	if (suspend)
716 		return tegra_usb_phy_power_off(phy);
717 	else
718 		return tegra_usb_phy_power_on(phy);
719 }
720 
721 static int ulpi_open(struct tegra_usb_phy *phy)
722 {
723 	int err;
724 
725 	phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link");
726 	if (IS_ERR(phy->clk)) {
727 		pr_err("%s: can't get ulpi clock\n", __func__);
728 		return PTR_ERR(phy->clk);
729 	}
730 
731 	err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio,
732 		"ulpi_phy_reset_b");
733 	if (err < 0) {
734 		dev_err(phy->u_phy.dev, "request failed for gpio: %d\n",
735 		       phy->reset_gpio);
736 		return err;
737 	}
738 
739 	err = gpio_direction_output(phy->reset_gpio, 0);
740 	if (err < 0) {
741 		dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n",
742 		       phy->reset_gpio);
743 		return err;
744 	}
745 
746 	phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
747 	if (!phy->ulpi) {
748 		dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n");
749 		err = -ENOMEM;
750 		return err;
751 	}
752 
753 	phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
754 	return 0;
755 }
756 
757 static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
758 {
759 	unsigned long parent_rate;
760 	int i;
761 	int err;
762 
763 	phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u");
764 	if (IS_ERR(phy->pll_u)) {
765 		pr_err("Can't get pll_u clock\n");
766 		return PTR_ERR(phy->pll_u);
767 	}
768 
769 	err = clk_prepare_enable(phy->pll_u);
770 	if (err)
771 		return err;
772 
773 	parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
774 	for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
775 		if (tegra_freq_table[i].freq == parent_rate) {
776 			phy->freq = &tegra_freq_table[i];
777 			break;
778 		}
779 	}
780 	if (!phy->freq) {
781 		pr_err("invalid pll_u parent rate %ld\n", parent_rate);
782 		err = -EINVAL;
783 		goto fail;
784 	}
785 
786 	if (!IS_ERR(phy->vbus)) {
787 		err = regulator_enable(phy->vbus);
788 		if (err) {
789 			dev_err(phy->u_phy.dev,
790 				"failed to enable usb vbus regulator: %d\n",
791 				err);
792 			goto fail;
793 		}
794 	}
795 
796 	if (phy->is_ulpi_phy)
797 		err = ulpi_open(phy);
798 	else
799 		err = utmip_pad_open(phy);
800 	if (err < 0)
801 		goto fail;
802 
803 	return 0;
804 
805 fail:
806 	clk_disable_unprepare(phy->pll_u);
807 	return err;
808 }
809 
810 void tegra_usb_phy_preresume(struct usb_phy *x)
811 {
812 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
813 
814 	if (!phy->is_ulpi_phy)
815 		utmi_phy_preresume(phy);
816 }
817 EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
818 
819 void tegra_usb_phy_postresume(struct usb_phy *x)
820 {
821 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
822 
823 	if (!phy->is_ulpi_phy)
824 		utmi_phy_postresume(phy);
825 }
826 EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
827 
828 void tegra_ehci_phy_restore_start(struct usb_phy *x,
829 				 enum tegra_usb_phy_port_speed port_speed)
830 {
831 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
832 
833 	if (!phy->is_ulpi_phy)
834 		utmi_phy_restore_start(phy, port_speed);
835 }
836 EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
837 
838 void tegra_ehci_phy_restore_end(struct usb_phy *x)
839 {
840 	struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
841 
842 	if (!phy->is_ulpi_phy)
843 		utmi_phy_restore_end(phy);
844 }
845 EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
846 
847 static int read_utmi_param(struct platform_device *pdev, const char *param,
848 			   u8 *dest)
849 {
850 	u32 value;
851 	int err = of_property_read_u32(pdev->dev.of_node, param, &value);
852 	*dest = (u8)value;
853 	if (err < 0)
854 		dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n",
855 			param, err);
856 	return err;
857 }
858 
859 static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
860 			  struct platform_device *pdev)
861 {
862 	struct resource *res;
863 	int err;
864 	struct tegra_utmip_config *config;
865 
866 	tegra_phy->is_ulpi_phy = false;
867 
868 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
869 	if (!res) {
870 		dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
871 		return  -ENXIO;
872 	}
873 
874 	tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
875 		resource_size(res));
876 	if (!tegra_phy->pad_regs) {
877 		dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
878 		return -ENOMEM;
879 	}
880 
881 	tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config),
882 					 GFP_KERNEL);
883 	if (!tegra_phy->config)
884 		return -ENOMEM;
885 
886 	config = tegra_phy->config;
887 
888 	err = read_utmi_param(pdev, "nvidia,hssync-start-delay",
889 		&config->hssync_start_delay);
890 	if (err < 0)
891 		return err;
892 
893 	err = read_utmi_param(pdev, "nvidia,elastic-limit",
894 		&config->elastic_limit);
895 	if (err < 0)
896 		return err;
897 
898 	err = read_utmi_param(pdev, "nvidia,idle-wait-delay",
899 		&config->idle_wait_delay);
900 	if (err < 0)
901 		return err;
902 
903 	err = read_utmi_param(pdev, "nvidia,term-range-adj",
904 		&config->term_range_adj);
905 	if (err < 0)
906 		return err;
907 
908 	err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew",
909 		&config->xcvr_lsfslew);
910 	if (err < 0)
911 		return err;
912 
913 	err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew",
914 		&config->xcvr_lsrslew);
915 	if (err < 0)
916 		return err;
917 
918 	if (tegra_phy->soc_config->requires_extra_tuning_parameters) {
919 		err = read_utmi_param(pdev, "nvidia,xcvr-hsslew",
920 			&config->xcvr_hsslew);
921 		if (err < 0)
922 			return err;
923 
924 		err = read_utmi_param(pdev, "nvidia,hssquelch-level",
925 			&config->hssquelch_level);
926 		if (err < 0)
927 			return err;
928 
929 		err = read_utmi_param(pdev, "nvidia,hsdiscon-level",
930 			&config->hsdiscon_level);
931 		if (err < 0)
932 			return err;
933 	}
934 
935 	config->xcvr_setup_use_fuses = of_property_read_bool(
936 		pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses");
937 
938 	if (!config->xcvr_setup_use_fuses) {
939 		err = read_utmi_param(pdev, "nvidia,xcvr-setup",
940 			&config->xcvr_setup);
941 		if (err < 0)
942 			return err;
943 	}
944 
945 	return 0;
946 }
947 
948 static const struct tegra_phy_soc_config tegra20_soc_config = {
949 	.utmi_pll_config_in_car_module = false,
950 	.has_hostpc = false,
951 	.requires_usbmode_setup = false,
952 	.requires_extra_tuning_parameters = false,
953 };
954 
955 static const struct tegra_phy_soc_config tegra30_soc_config = {
956 	.utmi_pll_config_in_car_module = true,
957 	.has_hostpc = true,
958 	.requires_usbmode_setup = true,
959 	.requires_extra_tuning_parameters = true,
960 };
961 
962 static const struct of_device_id tegra_usb_phy_id_table[] = {
963 	{ .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config },
964 	{ .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config },
965 	{ },
966 };
967 MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
968 
969 static int tegra_usb_phy_probe(struct platform_device *pdev)
970 {
971 	const struct of_device_id *match;
972 	struct resource *res;
973 	struct tegra_usb_phy *tegra_phy = NULL;
974 	struct device_node *np = pdev->dev.of_node;
975 	enum usb_phy_interface phy_type;
976 	int err;
977 
978 	tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
979 	if (!tegra_phy)
980 		return -ENOMEM;
981 
982 	match = of_match_device(tegra_usb_phy_id_table, &pdev->dev);
983 	if (!match) {
984 		dev_err(&pdev->dev, "Error: No device match found\n");
985 		return -ENODEV;
986 	}
987 	tegra_phy->soc_config = match->data;
988 
989 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
990 	if (!res) {
991 		dev_err(&pdev->dev, "Failed to get I/O memory\n");
992 		return  -ENXIO;
993 	}
994 
995 	tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
996 		resource_size(res));
997 	if (!tegra_phy->regs) {
998 		dev_err(&pdev->dev, "Failed to remap I/O memory\n");
999 		return -ENOMEM;
1000 	}
1001 
1002 	tegra_phy->is_legacy_phy =
1003 		of_property_read_bool(np, "nvidia,has-legacy-mode");
1004 
1005 	phy_type = of_usb_get_phy_mode(np);
1006 	switch (phy_type) {
1007 	case USBPHY_INTERFACE_MODE_UTMI:
1008 		err = utmi_phy_probe(tegra_phy, pdev);
1009 		if (err < 0)
1010 			return err;
1011 		break;
1012 
1013 	case USBPHY_INTERFACE_MODE_ULPI:
1014 		tegra_phy->is_ulpi_phy = true;
1015 
1016 		tegra_phy->reset_gpio =
1017 			of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0);
1018 		if (!gpio_is_valid(tegra_phy->reset_gpio)) {
1019 			dev_err(&pdev->dev, "invalid gpio: %d\n",
1020 				tegra_phy->reset_gpio);
1021 			return tegra_phy->reset_gpio;
1022 		}
1023 		tegra_phy->config = NULL;
1024 		break;
1025 
1026 	default:
1027 		dev_err(&pdev->dev, "phy_type is invalid or unsupported\n");
1028 		return -EINVAL;
1029 	}
1030 
1031 	if (of_find_property(np, "dr_mode", NULL))
1032 		tegra_phy->mode = usb_get_dr_mode(&pdev->dev);
1033 	else
1034 		tegra_phy->mode = USB_DR_MODE_HOST;
1035 
1036 	if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) {
1037 		dev_err(&pdev->dev, "dr_mode is invalid\n");
1038 		return -EINVAL;
1039 	}
1040 
1041 	/* On some boards, the VBUS regulator doesn't need to be controlled */
1042 	if (of_find_property(np, "vbus-supply", NULL)) {
1043 		tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus");
1044 		if (IS_ERR(tegra_phy->vbus))
1045 			return PTR_ERR(tegra_phy->vbus);
1046 	} else {
1047 		dev_notice(&pdev->dev, "no vbus regulator");
1048 		tegra_phy->vbus = ERR_PTR(-ENODEV);
1049 	}
1050 
1051 	tegra_phy->u_phy.dev = &pdev->dev;
1052 	err = tegra_usb_phy_init(tegra_phy);
1053 	if (err < 0)
1054 		return err;
1055 
1056 	tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend;
1057 
1058 	platform_set_drvdata(pdev, tegra_phy);
1059 
1060 	err = usb_add_phy_dev(&tegra_phy->u_phy);
1061 	if (err < 0) {
1062 		tegra_usb_phy_close(tegra_phy);
1063 		return err;
1064 	}
1065 
1066 	return 0;
1067 }
1068 
1069 static int tegra_usb_phy_remove(struct platform_device *pdev)
1070 {
1071 	struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev);
1072 
1073 	usb_remove_phy(&tegra_phy->u_phy);
1074 	tegra_usb_phy_close(tegra_phy);
1075 
1076 	return 0;
1077 }
1078 
1079 static struct platform_driver tegra_usb_phy_driver = {
1080 	.probe		= tegra_usb_phy_probe,
1081 	.remove		= tegra_usb_phy_remove,
1082 	.driver		= {
1083 		.name	= "tegra-phy",
1084 		.of_match_table = tegra_usb_phy_id_table,
1085 	},
1086 };
1087 module_platform_driver(tegra_usb_phy_driver);
1088 
1089 MODULE_DESCRIPTION("Tegra USB PHY driver");
1090 MODULE_LICENSE("GPL v2");
1091