1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright 2012-2014 Freescale Semiconductor, Inc. 4 * Copyright (C) 2012 Marek Vasut <marex@denx.de> 5 * on behalf of DENX Software Engineering GmbH 6 */ 7 8 #include <linux/module.h> 9 #include <linux/kernel.h> 10 #include <linux/platform_device.h> 11 #include <linux/clk.h> 12 #include <linux/usb/otg.h> 13 #include <linux/stmp_device.h> 14 #include <linux/delay.h> 15 #include <linux/err.h> 16 #include <linux/io.h> 17 #include <linux/of_device.h> 18 #include <linux/regmap.h> 19 #include <linux/mfd/syscon.h> 20 21 #define DRIVER_NAME "mxs_phy" 22 23 #define HW_USBPHY_PWD 0x00 24 #define HW_USBPHY_TX 0x10 25 #define HW_USBPHY_CTRL 0x30 26 #define HW_USBPHY_CTRL_SET 0x34 27 #define HW_USBPHY_CTRL_CLR 0x38 28 29 #define HW_USBPHY_DEBUG_SET 0x54 30 #define HW_USBPHY_DEBUG_CLR 0x58 31 32 #define HW_USBPHY_IP 0x90 33 #define HW_USBPHY_IP_SET 0x94 34 #define HW_USBPHY_IP_CLR 0x98 35 36 #define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16) 37 #define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) 38 #define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) 39 40 #define BM_USBPHY_CTRL_SFTRST BIT(31) 41 #define BM_USBPHY_CTRL_CLKGATE BIT(30) 42 #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) 43 #define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26) 44 #define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25) 45 #define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23) 46 #define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22) 47 #define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21) 48 #define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20) 49 #define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19) 50 #define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18) 51 #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) 52 #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) 53 #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) 54 55 #define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) 56 57 #define BM_USBPHY_DEBUG_CLKGATE BIT(30) 58 59 /* Anatop Registers */ 60 #define ANADIG_ANA_MISC0 0x150 61 #define ANADIG_ANA_MISC0_SET 0x154 62 #define ANADIG_ANA_MISC0_CLR 0x158 63 64 #define ANADIG_USB1_CHRG_DETECT_SET 0x1b4 65 #define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8 66 #define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20) 67 #define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19) 68 #define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18) 69 70 #define ANADIG_USB1_VBUS_DET_STAT 0x1c0 71 #define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) 72 73 #define ANADIG_USB1_CHRG_DET_STAT 0x1d0 74 #define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2) 75 #define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1) 76 #define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0) 77 78 #define ANADIG_USB2_VBUS_DET_STAT 0x220 79 80 #define ANADIG_USB1_LOOPBACK_SET 0x1e4 81 #define ANADIG_USB1_LOOPBACK_CLR 0x1e8 82 #define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART BIT(0) 83 84 #define ANADIG_USB2_LOOPBACK_SET 0x244 85 #define ANADIG_USB2_LOOPBACK_CLR 0x248 86 87 #define ANADIG_USB1_MISC 0x1f0 88 #define ANADIG_USB2_MISC 0x250 89 90 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12) 91 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11) 92 93 #define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) 94 #define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3) 95 96 #define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2) 97 #define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5) 98 #define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2) 99 #define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5) 100 101 #define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29) 102 #define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28) 103 #define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29) 104 #define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28) 105 106 #define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) 107 108 /* Do disconnection between PHY and controller without vbus */ 109 #define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) 110 111 /* 112 * The PHY will be in messy if there is a wakeup after putting 113 * bus to suspend (set portsc.suspendM) but before setting PHY to low 114 * power mode (set portsc.phcd). 115 */ 116 #define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) 117 118 /* 119 * The SOF sends too fast after resuming, it will cause disconnection 120 * between host and high speed device. 121 */ 122 #define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) 123 124 /* 125 * IC has bug fixes logic, they include 126 * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST 127 * which are described at above flags, the RTL will handle it 128 * according to different versions. 129 */ 130 #define MXS_PHY_NEED_IP_FIX BIT(3) 131 132 /* Minimum and maximum values for device tree entries */ 133 #define MXS_PHY_TX_CAL45_MIN 30 134 #define MXS_PHY_TX_CAL45_MAX 55 135 #define MXS_PHY_TX_D_CAL_MIN 79 136 #define MXS_PHY_TX_D_CAL_MAX 119 137 138 struct mxs_phy_data { 139 unsigned int flags; 140 }; 141 142 static const struct mxs_phy_data imx23_phy_data = { 143 .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, 144 }; 145 146 static const struct mxs_phy_data imx6q_phy_data = { 147 .flags = MXS_PHY_SENDING_SOF_TOO_FAST | 148 MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | 149 MXS_PHY_NEED_IP_FIX, 150 }; 151 152 static const struct mxs_phy_data imx6sl_phy_data = { 153 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | 154 MXS_PHY_NEED_IP_FIX, 155 }; 156 157 static const struct mxs_phy_data vf610_phy_data = { 158 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | 159 MXS_PHY_NEED_IP_FIX, 160 }; 161 162 static const struct mxs_phy_data imx6sx_phy_data = { 163 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, 164 }; 165 166 static const struct mxs_phy_data imx6ul_phy_data = { 167 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, 168 }; 169 170 static const struct of_device_id mxs_phy_dt_ids[] = { 171 { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, 172 { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, 173 { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, 174 { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, 175 { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, 176 { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, 177 { /* sentinel */ } 178 }; 179 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); 180 181 struct mxs_phy { 182 struct usb_phy phy; 183 struct clk *clk; 184 const struct mxs_phy_data *data; 185 struct regmap *regmap_anatop; 186 int port_id; 187 u32 tx_reg_set; 188 u32 tx_reg_mask; 189 }; 190 191 static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) 192 { 193 return mxs_phy->data == &imx6q_phy_data; 194 } 195 196 static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) 197 { 198 return mxs_phy->data == &imx6sl_phy_data; 199 } 200 201 /* 202 * PHY needs some 32K cycles to switch from 32K clock to 203 * bus (such as AHB/AXI, etc) clock. 204 */ 205 static void mxs_phy_clock_switch_delay(void) 206 { 207 usleep_range(300, 400); 208 } 209 210 static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) 211 { 212 void __iomem *base = mxs_phy->phy.io_priv; 213 u32 phytx; 214 215 /* Update TX register if there is anything to write */ 216 if (mxs_phy->tx_reg_mask) { 217 phytx = readl(base + HW_USBPHY_TX); 218 phytx &= ~mxs_phy->tx_reg_mask; 219 phytx |= mxs_phy->tx_reg_set; 220 writel(phytx, base + HW_USBPHY_TX); 221 } 222 } 223 224 static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) 225 { 226 int ret; 227 void __iomem *base = mxs_phy->phy.io_priv; 228 229 ret = stmp_reset_block(base + HW_USBPHY_CTRL); 230 if (ret) 231 return ret; 232 233 /* Power up the PHY */ 234 writel(0, base + HW_USBPHY_PWD); 235 236 /* 237 * USB PHY Ctrl Setting 238 * - Auto clock/power on 239 * - Enable full/low speed support 240 */ 241 writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | 242 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | 243 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | 244 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | 245 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL | 246 BM_USBPHY_CTRL_ENUTMILEVEL2 | 247 BM_USBPHY_CTRL_ENUTMILEVEL3, 248 base + HW_USBPHY_CTRL_SET); 249 250 if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) 251 writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); 252 253 mxs_phy_tx_init(mxs_phy); 254 255 return 0; 256 } 257 258 /* Return true if the vbus is there */ 259 static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) 260 { 261 unsigned int vbus_value = 0; 262 263 if (!mxs_phy->regmap_anatop) 264 return false; 265 266 if (mxs_phy->port_id == 0) 267 regmap_read(mxs_phy->regmap_anatop, 268 ANADIG_USB1_VBUS_DET_STAT, 269 &vbus_value); 270 else if (mxs_phy->port_id == 1) 271 regmap_read(mxs_phy->regmap_anatop, 272 ANADIG_USB2_VBUS_DET_STAT, 273 &vbus_value); 274 275 if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID) 276 return true; 277 else 278 return false; 279 } 280 281 static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) 282 { 283 void __iomem *base = mxs_phy->phy.io_priv; 284 u32 reg; 285 286 if (disconnect) 287 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, 288 base + HW_USBPHY_DEBUG_CLR); 289 290 if (mxs_phy->port_id == 0) { 291 reg = disconnect ? ANADIG_USB1_LOOPBACK_SET 292 : ANADIG_USB1_LOOPBACK_CLR; 293 regmap_write(mxs_phy->regmap_anatop, reg, 294 BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 | 295 BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN); 296 } else if (mxs_phy->port_id == 1) { 297 reg = disconnect ? ANADIG_USB2_LOOPBACK_SET 298 : ANADIG_USB2_LOOPBACK_CLR; 299 regmap_write(mxs_phy->regmap_anatop, reg, 300 BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 | 301 BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN); 302 } 303 304 if (!disconnect) 305 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, 306 base + HW_USBPHY_DEBUG_SET); 307 308 /* Delay some time, and let Linestate be SE0 for controller */ 309 if (disconnect) 310 usleep_range(500, 1000); 311 } 312 313 static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy) 314 { 315 void __iomem *base = mxs_phy->phy.io_priv; 316 u32 phyctrl = readl(base + HW_USBPHY_CTRL); 317 318 if (IS_ENABLED(CONFIG_USB_OTG) && 319 !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE)) 320 return true; 321 322 return false; 323 } 324 325 static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) 326 { 327 bool vbus_is_on = false; 328 329 /* If the SoCs don't need to disconnect line without vbus, quit */ 330 if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS)) 331 return; 332 333 /* If the SoCs don't have anatop, quit */ 334 if (!mxs_phy->regmap_anatop) 335 return; 336 337 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); 338 339 if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy)) 340 __mxs_phy_disconnect_line(mxs_phy, true); 341 else 342 __mxs_phy_disconnect_line(mxs_phy, false); 343 344 } 345 346 static int mxs_phy_init(struct usb_phy *phy) 347 { 348 int ret; 349 struct mxs_phy *mxs_phy = to_mxs_phy(phy); 350 351 mxs_phy_clock_switch_delay(); 352 ret = clk_prepare_enable(mxs_phy->clk); 353 if (ret) 354 return ret; 355 356 return mxs_phy_hw_init(mxs_phy); 357 } 358 359 static void mxs_phy_shutdown(struct usb_phy *phy) 360 { 361 struct mxs_phy *mxs_phy = to_mxs_phy(phy); 362 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | 363 BM_USBPHY_CTRL_ENDPDMCHG_WKUP | 364 BM_USBPHY_CTRL_ENIDCHG_WKUP | 365 BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | 366 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | 367 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | 368 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | 369 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL; 370 371 writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR); 372 writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD); 373 374 writel(BM_USBPHY_CTRL_CLKGATE, 375 phy->io_priv + HW_USBPHY_CTRL_SET); 376 377 clk_disable_unprepare(mxs_phy->clk); 378 } 379 380 static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy) 381 { 382 unsigned int line_state; 383 /* bit definition is the same for all controllers */ 384 unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS, 385 dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS; 386 unsigned int reg = ANADIG_USB1_MISC; 387 388 /* If the SoCs don't have anatop, quit */ 389 if (!mxs_phy->regmap_anatop) 390 return false; 391 392 if (mxs_phy->port_id == 0) 393 reg = ANADIG_USB1_MISC; 394 else if (mxs_phy->port_id == 1) 395 reg = ANADIG_USB2_MISC; 396 397 regmap_read(mxs_phy->regmap_anatop, reg, &line_state); 398 399 if ((line_state & (dp_bit | dm_bit)) == dm_bit) 400 return true; 401 else 402 return false; 403 } 404 405 static int mxs_phy_suspend(struct usb_phy *x, int suspend) 406 { 407 int ret; 408 struct mxs_phy *mxs_phy = to_mxs_phy(x); 409 bool low_speed_connection, vbus_is_on; 410 411 low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy); 412 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); 413 414 if (suspend) { 415 /* 416 * FIXME: Do not power down RXPWD1PT1 bit for low speed 417 * connect. The low speed connection will have problem at 418 * very rare cases during usb suspend and resume process. 419 */ 420 if (low_speed_connection & vbus_is_on) { 421 /* 422 * If value to be set as pwd value is not 0xffffffff, 423 * several 32Khz cycles are needed. 424 */ 425 mxs_phy_clock_switch_delay(); 426 writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD); 427 } else { 428 writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); 429 } 430 writel(BM_USBPHY_CTRL_CLKGATE, 431 x->io_priv + HW_USBPHY_CTRL_SET); 432 clk_disable_unprepare(mxs_phy->clk); 433 } else { 434 mxs_phy_clock_switch_delay(); 435 ret = clk_prepare_enable(mxs_phy->clk); 436 if (ret) 437 return ret; 438 writel(BM_USBPHY_CTRL_CLKGATE, 439 x->io_priv + HW_USBPHY_CTRL_CLR); 440 writel(0, x->io_priv + HW_USBPHY_PWD); 441 } 442 443 return 0; 444 } 445 446 static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled) 447 { 448 struct mxs_phy *mxs_phy = to_mxs_phy(x); 449 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | 450 BM_USBPHY_CTRL_ENDPDMCHG_WKUP | 451 BM_USBPHY_CTRL_ENIDCHG_WKUP; 452 if (enabled) { 453 mxs_phy_disconnect_line(mxs_phy, true); 454 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET); 455 } else { 456 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR); 457 mxs_phy_disconnect_line(mxs_phy, false); 458 } 459 460 return 0; 461 } 462 463 static int mxs_phy_on_connect(struct usb_phy *phy, 464 enum usb_device_speed speed) 465 { 466 dev_dbg(phy->dev, "%s device has connected\n", 467 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); 468 469 if (speed == USB_SPEED_HIGH) 470 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, 471 phy->io_priv + HW_USBPHY_CTRL_SET); 472 473 return 0; 474 } 475 476 static int mxs_phy_on_disconnect(struct usb_phy *phy, 477 enum usb_device_speed speed) 478 { 479 dev_dbg(phy->dev, "%s device has disconnected\n", 480 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); 481 482 /* Sometimes, the speed is not high speed when the error occurs */ 483 if (readl(phy->io_priv + HW_USBPHY_CTRL) & 484 BM_USBPHY_CTRL_ENHOSTDISCONDETECT) 485 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, 486 phy->io_priv + HW_USBPHY_CTRL_CLR); 487 488 return 0; 489 } 490 491 #define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT 100 492 static int mxs_charger_data_contact_detect(struct mxs_phy *x) 493 { 494 struct regmap *regmap = x->regmap_anatop; 495 int i, stable_contact_count = 0; 496 u32 val; 497 498 /* Check if vbus is valid */ 499 regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val); 500 if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) { 501 dev_err(x->phy.dev, "vbus is not valid\n"); 502 return -EINVAL; 503 } 504 505 /* Enable charger detector */ 506 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, 507 ANADIG_USB1_CHRG_DETECT_EN_B); 508 /* 509 * - Do not check whether a charger is connected to the USB port 510 * - Check whether the USB plug has been in contact with each other 511 */ 512 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, 513 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | 514 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); 515 516 /* Check if plug is connected */ 517 for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) { 518 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); 519 if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) { 520 stable_contact_count++; 521 if (stable_contact_count > 5) 522 /* Data pin makes contact */ 523 break; 524 else 525 usleep_range(5000, 10000); 526 } else { 527 stable_contact_count = 0; 528 usleep_range(5000, 6000); 529 } 530 } 531 532 if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) { 533 dev_err(x->phy.dev, 534 "Data pin can't make good contact.\n"); 535 /* Disable charger detector */ 536 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, 537 ANADIG_USB1_CHRG_DETECT_EN_B | 538 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); 539 return -ENXIO; 540 } 541 542 return 0; 543 } 544 545 static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x) 546 { 547 struct regmap *regmap = x->regmap_anatop; 548 enum usb_charger_type chgr_type = UNKNOWN_TYPE; 549 u32 val; 550 551 /* 552 * - Do check whether a charger is connected to the USB port 553 * - Do not Check whether the USB plug has been in contact with 554 * each other 555 */ 556 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR, 557 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT | 558 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); 559 560 msleep(100); 561 562 /* Check if it is a charger */ 563 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); 564 if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) { 565 chgr_type = SDP_TYPE; 566 dev_dbg(x->phy.dev, "It is a stardard downstream port\n"); 567 } 568 569 /* Disable charger detector */ 570 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET, 571 ANADIG_USB1_CHRG_DETECT_EN_B | 572 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B); 573 574 return chgr_type; 575 } 576 577 /* 578 * It must be called after DP is pulled up, which is used to 579 * differentiate DCP and CDP. 580 */ 581 enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x) 582 { 583 struct regmap *regmap = x->regmap_anatop; 584 int val; 585 586 msleep(80); 587 588 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val); 589 if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) { 590 dev_dbg(x->phy.dev, "It is a dedicate charging port\n"); 591 return DCP_TYPE; 592 } else { 593 dev_dbg(x->phy.dev, "It is a charging downstream port\n"); 594 return CDP_TYPE; 595 } 596 } 597 598 static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy) 599 { 600 struct mxs_phy *mxs_phy = to_mxs_phy(phy); 601 struct regmap *regmap = mxs_phy->regmap_anatop; 602 void __iomem *base = phy->io_priv; 603 enum usb_charger_type chgr_type = UNKNOWN_TYPE; 604 605 if (mxs_charger_data_contact_detect(mxs_phy)) 606 return chgr_type; 607 608 chgr_type = mxs_charger_primary_detection(mxs_phy); 609 610 if (chgr_type != SDP_TYPE) { 611 /* Pull up DP via test */ 612 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, 613 base + HW_USBPHY_DEBUG_CLR); 614 regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET, 615 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART); 616 617 chgr_type = mxs_charger_secondary_detection(mxs_phy); 618 619 /* Stop the test */ 620 regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR, 621 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART); 622 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, 623 base + HW_USBPHY_DEBUG_SET); 624 } 625 626 return chgr_type; 627 } 628 629 static int mxs_phy_probe(struct platform_device *pdev) 630 { 631 struct resource *res; 632 void __iomem *base; 633 struct clk *clk; 634 struct mxs_phy *mxs_phy; 635 int ret; 636 const struct of_device_id *of_id; 637 struct device_node *np = pdev->dev.of_node; 638 u32 val; 639 640 of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); 641 if (!of_id) 642 return -ENODEV; 643 644 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 645 base = devm_ioremap_resource(&pdev->dev, res); 646 if (IS_ERR(base)) 647 return PTR_ERR(base); 648 649 clk = devm_clk_get(&pdev->dev, NULL); 650 if (IS_ERR(clk)) { 651 dev_err(&pdev->dev, 652 "can't get the clock, err=%ld", PTR_ERR(clk)); 653 return PTR_ERR(clk); 654 } 655 656 mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); 657 if (!mxs_phy) 658 return -ENOMEM; 659 660 /* Some SoCs don't have anatop registers */ 661 if (of_get_property(np, "fsl,anatop", NULL)) { 662 mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle 663 (np, "fsl,anatop"); 664 if (IS_ERR(mxs_phy->regmap_anatop)) { 665 dev_dbg(&pdev->dev, 666 "failed to find regmap for anatop\n"); 667 return PTR_ERR(mxs_phy->regmap_anatop); 668 } 669 } 670 671 /* Precompute which bits of the TX register are to be updated, if any */ 672 if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) && 673 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { 674 /* Scale to a 4-bit value */ 675 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF 676 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); 677 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0); 678 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val); 679 } 680 681 if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) && 682 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { 683 /* Scale to a 4-bit value. */ 684 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF 685 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); 686 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0); 687 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val); 688 } 689 690 if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) && 691 val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) { 692 /* Scale to a 4-bit value. Round up the values and heavily 693 * weight the rounding by adding 2/3 of the denominator. 694 */ 695 val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF 696 + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3) 697 / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN); 698 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0); 699 mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); 700 } 701 702 ret = of_alias_get_id(np, "usbphy"); 703 if (ret < 0) 704 dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); 705 mxs_phy->port_id = ret; 706 707 mxs_phy->phy.io_priv = base; 708 mxs_phy->phy.dev = &pdev->dev; 709 mxs_phy->phy.label = DRIVER_NAME; 710 mxs_phy->phy.init = mxs_phy_init; 711 mxs_phy->phy.shutdown = mxs_phy_shutdown; 712 mxs_phy->phy.set_suspend = mxs_phy_suspend; 713 mxs_phy->phy.notify_connect = mxs_phy_on_connect; 714 mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; 715 mxs_phy->phy.type = USB_PHY_TYPE_USB2; 716 mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup; 717 mxs_phy->phy.charger_detect = mxs_phy_charger_detect; 718 719 mxs_phy->clk = clk; 720 mxs_phy->data = of_id->data; 721 722 platform_set_drvdata(pdev, mxs_phy); 723 724 device_set_wakeup_capable(&pdev->dev, true); 725 726 return usb_add_phy_dev(&mxs_phy->phy); 727 } 728 729 static int mxs_phy_remove(struct platform_device *pdev) 730 { 731 struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); 732 733 usb_remove_phy(&mxs_phy->phy); 734 735 return 0; 736 } 737 738 #ifdef CONFIG_PM_SLEEP 739 static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on) 740 { 741 unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; 742 743 /* If the SoCs don't have anatop, quit */ 744 if (!mxs_phy->regmap_anatop) 745 return; 746 747 if (is_imx6q_phy(mxs_phy)) 748 regmap_write(mxs_phy->regmap_anatop, reg, 749 BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG); 750 else if (is_imx6sl_phy(mxs_phy)) 751 regmap_write(mxs_phy->regmap_anatop, 752 reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL); 753 } 754 755 static int mxs_phy_system_suspend(struct device *dev) 756 { 757 struct mxs_phy *mxs_phy = dev_get_drvdata(dev); 758 759 if (device_may_wakeup(dev)) 760 mxs_phy_enable_ldo_in_suspend(mxs_phy, true); 761 762 return 0; 763 } 764 765 static int mxs_phy_system_resume(struct device *dev) 766 { 767 struct mxs_phy *mxs_phy = dev_get_drvdata(dev); 768 769 if (device_may_wakeup(dev)) 770 mxs_phy_enable_ldo_in_suspend(mxs_phy, false); 771 772 return 0; 773 } 774 #endif /* CONFIG_PM_SLEEP */ 775 776 static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, 777 mxs_phy_system_resume); 778 779 static struct platform_driver mxs_phy_driver = { 780 .probe = mxs_phy_probe, 781 .remove = mxs_phy_remove, 782 .driver = { 783 .name = DRIVER_NAME, 784 .of_match_table = mxs_phy_dt_ids, 785 .pm = &mxs_phy_pm, 786 }, 787 }; 788 789 static int __init mxs_phy_module_init(void) 790 { 791 return platform_driver_register(&mxs_phy_driver); 792 } 793 postcore_initcall(mxs_phy_module_init); 794 795 static void __exit mxs_phy_module_exit(void) 796 { 797 platform_driver_unregister(&mxs_phy_driver); 798 } 799 module_exit(mxs_phy_module_exit); 800 801 MODULE_ALIAS("platform:mxs-usb-phy"); 802 MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); 803 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); 804 MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); 805 MODULE_LICENSE("GPL"); 806