xref: /openbmc/linux/drivers/usb/phy/phy-mv-usb.h (revision e8f6f3b4)
1 /*
2  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
3  *
4  * This program is free software; you can redistribute  it and/or modify it
5  * under  the terms of  the GNU General  Public License as published by the
6  * Free Software Foundation;  either version 2 of the  License, or (at your
7  * option) any later version.
8  */
9 
10 #ifndef	__MV_USB_OTG_CONTROLLER__
11 #define	__MV_USB_OTG_CONTROLLER__
12 
13 #include <linux/types.h>
14 
15 /* Command Register Bit Masks */
16 #define USBCMD_RUN_STOP			(0x00000001)
17 #define USBCMD_CTRL_RESET		(0x00000002)
18 
19 /* otgsc Register Bit Masks */
20 #define OTGSC_CTRL_VUSB_DISCHARGE		0x00000001
21 #define OTGSC_CTRL_VUSB_CHARGE			0x00000002
22 #define OTGSC_CTRL_OTG_TERM			0x00000008
23 #define OTGSC_CTRL_DATA_PULSING			0x00000010
24 #define OTGSC_STS_USB_ID			0x00000100
25 #define OTGSC_STS_A_VBUS_VALID			0x00000200
26 #define OTGSC_STS_A_SESSION_VALID		0x00000400
27 #define OTGSC_STS_B_SESSION_VALID		0x00000800
28 #define OTGSC_STS_B_SESSION_END			0x00001000
29 #define OTGSC_STS_1MS_TOGGLE			0x00002000
30 #define OTGSC_STS_DATA_PULSING			0x00004000
31 #define OTGSC_INTSTS_USB_ID			0x00010000
32 #define OTGSC_INTSTS_A_VBUS_VALID		0x00020000
33 #define OTGSC_INTSTS_A_SESSION_VALID		0x00040000
34 #define OTGSC_INTSTS_B_SESSION_VALID		0x00080000
35 #define OTGSC_INTSTS_B_SESSION_END		0x00100000
36 #define OTGSC_INTSTS_1MS			0x00200000
37 #define OTGSC_INTSTS_DATA_PULSING		0x00400000
38 #define OTGSC_INTR_USB_ID			0x01000000
39 #define OTGSC_INTR_A_VBUS_VALID			0x02000000
40 #define OTGSC_INTR_A_SESSION_VALID		0x04000000
41 #define OTGSC_INTR_B_SESSION_VALID		0x08000000
42 #define OTGSC_INTR_B_SESSION_END		0x10000000
43 #define OTGSC_INTR_1MS_TIMER			0x20000000
44 #define OTGSC_INTR_DATA_PULSING			0x40000000
45 
46 #define CAPLENGTH_MASK		(0xff)
47 
48 /* Timer's interval, unit 10ms */
49 #define T_A_WAIT_VRISE		100
50 #define T_A_WAIT_BCON		2000
51 #define T_A_AIDL_BDIS		100
52 #define T_A_BIDL_ADIS		20
53 #define T_B_ASE0_BRST		400
54 #define T_B_SE0_SRP		300
55 #define T_B_SRP_FAIL		2000
56 #define T_B_DATA_PLS		10
57 #define T_B_SRP_INIT		100
58 #define T_A_SRP_RSPNS		10
59 #define T_A_DRV_RSM		5
60 
61 enum otg_function {
62 	OTG_B_DEVICE = 0,
63 	OTG_A_DEVICE
64 };
65 
66 enum mv_otg_timer {
67 	A_WAIT_BCON_TIMER = 0,
68 	OTG_TIMER_NUM
69 };
70 
71 /* PXA OTG state machine */
72 struct mv_otg_ctrl {
73 	/* internal variables */
74 	u8 a_set_b_hnp_en;	/* A-Device set b_hnp_en */
75 	u8 b_srp_done;
76 	u8 b_hnp_en;
77 
78 	/* OTG inputs */
79 	u8 a_bus_drop;
80 	u8 a_bus_req;
81 	u8 a_clr_err;
82 	u8 a_bus_resume;
83 	u8 a_bus_suspend;
84 	u8 a_conn;
85 	u8 a_sess_vld;
86 	u8 a_srp_det;
87 	u8 a_vbus_vld;
88 	u8 b_bus_req;		/* B-Device Require Bus */
89 	u8 b_bus_resume;
90 	u8 b_bus_suspend;
91 	u8 b_conn;
92 	u8 b_se0_srp;
93 	u8 b_sess_end;
94 	u8 b_sess_vld;
95 	u8 id;
96 	u8 a_suspend_req;
97 
98 	/*Timer event */
99 	u8 a_aidl_bdis_timeout;
100 	u8 b_ase0_brst_timeout;
101 	u8 a_bidl_adis_timeout;
102 	u8 a_wait_bcon_timeout;
103 
104 	struct timer_list timer[OTG_TIMER_NUM];
105 };
106 
107 #define VUSBHS_MAX_PORTS	8
108 
109 struct mv_otg_regs {
110 	u32 usbcmd;		/* Command register */
111 	u32 usbsts;		/* Status register */
112 	u32 usbintr;		/* Interrupt enable */
113 	u32 frindex;		/* Frame index */
114 	u32 reserved1[1];
115 	u32 deviceaddr;		/* Device Address */
116 	u32 eplistaddr;		/* Endpoint List Address */
117 	u32 ttctrl;		/* HOST TT status and control */
118 	u32 burstsize;		/* Programmable Burst Size */
119 	u32 txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
120 	u32 reserved[4];
121 	u32 epnak;		/* Endpoint NAK */
122 	u32 epnaken;		/* Endpoint NAK Enable */
123 	u32 configflag;		/* Configured Flag register */
124 	u32 portsc[VUSBHS_MAX_PORTS];	/* Port Status/Control x, x = 1..8 */
125 	u32 otgsc;
126 	u32 usbmode;		/* USB Host/Device mode */
127 	u32 epsetupstat;	/* Endpoint Setup Status */
128 	u32 epprime;		/* Endpoint Initialize */
129 	u32 epflush;		/* Endpoint De-initialize */
130 	u32 epstatus;		/* Endpoint Status */
131 	u32 epcomplete;		/* Endpoint Interrupt On Complete */
132 	u32 epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
133 	u32 mcr;		/* Mux Control */
134 	u32 isr;		/* Interrupt Status */
135 	u32 ier;		/* Interrupt Enable */
136 };
137 
138 struct mv_otg {
139 	struct usb_phy phy;
140 	struct mv_otg_ctrl otg_ctrl;
141 
142 	/* base address */
143 	void __iomem *phy_regs;
144 	void __iomem *cap_regs;
145 	struct mv_otg_regs __iomem *op_regs;
146 
147 	struct platform_device *pdev;
148 	int irq;
149 	u32 irq_status;
150 	u32 irq_en;
151 
152 	struct delayed_work work;
153 	struct workqueue_struct *qwork;
154 
155 	spinlock_t wq_lock;
156 
157 	struct mv_usb_platform_data *pdata;
158 
159 	unsigned int active;
160 	unsigned int clock_gating;
161 	struct clk *clk;
162 };
163 
164 #endif
165