1 /* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. 2 * 3 * This program is free software; you can redistribute it and/or modify it 4 * under the terms of the GNU General Public License as published by the 5 * Free Software Foundation; either version 2 of the License, or (at your 6 * option) any later version. 7 * 8 * This program is distributed in the hope that it will be useful, but 9 * WITHOUT ANY WARRANTY; without even the implied warranty of 10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 11 * General Public License for more details. 12 * 13 * You should have received a copy of the GNU General Public License along 14 * with this program; if not, write to the Free Software Foundation, Inc., 15 * 675 Mass Ave, Cambridge, MA 02139, USA. 16 */ 17 18 #include "otg_fsm.h" 19 #include <linux/usb/otg.h> 20 #include <linux/ioctl.h> 21 22 /* USB Command Register Bit Masks */ 23 #define USB_CMD_RUN_STOP (0x1<<0) 24 #define USB_CMD_CTRL_RESET (0x1<<1) 25 #define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4) 26 #define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5) 27 #define USB_CMD_INT_AA_DOORBELL (0x1<<6) 28 #define USB_CMD_ASP (0x3<<8) 29 #define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11) 30 #define USB_CMD_SUTW (0x1<<13) 31 #define USB_CMD_ATDTW (0x1<<14) 32 #define USB_CMD_ITC (0xFF<<16) 33 34 /* bit 15,3,2 are frame list size */ 35 #define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2) 36 #define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2) 37 #define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2) 38 #define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2) 39 #define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2) 40 #define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2) 41 #define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2) 42 #define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2) 43 44 /* bit 9-8 are async schedule park mode count */ 45 #define USB_CMD_ASP_00 (0x0<<8) 46 #define USB_CMD_ASP_01 (0x1<<8) 47 #define USB_CMD_ASP_10 (0x2<<8) 48 #define USB_CMD_ASP_11 (0x3<<8) 49 #define USB_CMD_ASP_BIT_POS (8) 50 51 /* bit 23-16 are interrupt threshold control */ 52 #define USB_CMD_ITC_NO_THRESHOLD (0x00<<16) 53 #define USB_CMD_ITC_1_MICRO_FRM (0x01<<16) 54 #define USB_CMD_ITC_2_MICRO_FRM (0x02<<16) 55 #define USB_CMD_ITC_4_MICRO_FRM (0x04<<16) 56 #define USB_CMD_ITC_8_MICRO_FRM (0x08<<16) 57 #define USB_CMD_ITC_16_MICRO_FRM (0x10<<16) 58 #define USB_CMD_ITC_32_MICRO_FRM (0x20<<16) 59 #define USB_CMD_ITC_64_MICRO_FRM (0x40<<16) 60 #define USB_CMD_ITC_BIT_POS (16) 61 62 /* USB Status Register Bit Masks */ 63 #define USB_STS_INT (0x1<<0) 64 #define USB_STS_ERR (0x1<<1) 65 #define USB_STS_PORT_CHANGE (0x1<<2) 66 #define USB_STS_FRM_LST_ROLL (0x1<<3) 67 #define USB_STS_SYS_ERR (0x1<<4) 68 #define USB_STS_IAA (0x1<<5) 69 #define USB_STS_RESET_RECEIVED (0x1<<6) 70 #define USB_STS_SOF (0x1<<7) 71 #define USB_STS_DCSUSPEND (0x1<<8) 72 #define USB_STS_HC_HALTED (0x1<<12) 73 #define USB_STS_RCL (0x1<<13) 74 #define USB_STS_PERIODIC_SCHEDULE (0x1<<14) 75 #define USB_STS_ASYNC_SCHEDULE (0x1<<15) 76 77 /* USB Interrupt Enable Register Bit Masks */ 78 #define USB_INTR_INT_EN (0x1<<0) 79 #define USB_INTR_ERR_INT_EN (0x1<<1) 80 #define USB_INTR_PC_DETECT_EN (0x1<<2) 81 #define USB_INTR_FRM_LST_ROLL_EN (0x1<<3) 82 #define USB_INTR_SYS_ERR_EN (0x1<<4) 83 #define USB_INTR_ASYN_ADV_EN (0x1<<5) 84 #define USB_INTR_RESET_EN (0x1<<6) 85 #define USB_INTR_SOF_EN (0x1<<7) 86 #define USB_INTR_DEVICE_SUSPEND (0x1<<8) 87 88 /* Device Address bit masks */ 89 #define USB_DEVICE_ADDRESS_MASK (0x7F<<25) 90 #define USB_DEVICE_ADDRESS_BIT_POS (25) 91 /* PORTSC Register Bit Masks,Only one PORT in OTG mode*/ 92 #define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0) 93 #define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1) 94 #define PORTSC_PORT_ENABLE (0x1<<2) 95 #define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3) 96 #define PORTSC_OVER_CURRENT_ACT (0x1<<4) 97 #define PORTSC_OVER_CUURENT_CHG (0x1<<5) 98 #define PORTSC_PORT_FORCE_RESUME (0x1<<6) 99 #define PORTSC_PORT_SUSPEND (0x1<<7) 100 #define PORTSC_PORT_RESET (0x1<<8) 101 #define PORTSC_LINE_STATUS_BITS (0x3<<10) 102 #define PORTSC_PORT_POWER (0x1<<12) 103 #define PORTSC_PORT_INDICTOR_CTRL (0x3<<14) 104 #define PORTSC_PORT_TEST_CTRL (0xF<<16) 105 #define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20) 106 #define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21) 107 #define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22) 108 #define PORTSC_PHY_LOW_POWER_SPD (0x1<<23) 109 #define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24) 110 #define PORTSC_PORT_SPEED_MASK (0x3<<26) 111 #define PORTSC_TRANSCEIVER_WIDTH (0x1<<28) 112 #define PORTSC_PHY_TYPE_SEL (0x3<<30) 113 /* bit 11-10 are line status */ 114 #define PORTSC_LINE_STATUS_SE0 (0x0<<10) 115 #define PORTSC_LINE_STATUS_JSTATE (0x1<<10) 116 #define PORTSC_LINE_STATUS_KSTATE (0x2<<10) 117 #define PORTSC_LINE_STATUS_UNDEF (0x3<<10) 118 #define PORTSC_LINE_STATUS_BIT_POS (10) 119 120 /* bit 15-14 are port indicator control */ 121 #define PORTSC_PIC_OFF (0x0<<14) 122 #define PORTSC_PIC_AMBER (0x1<<14) 123 #define PORTSC_PIC_GREEN (0x2<<14) 124 #define PORTSC_PIC_UNDEF (0x3<<14) 125 #define PORTSC_PIC_BIT_POS (14) 126 127 /* bit 19-16 are port test control */ 128 #define PORTSC_PTC_DISABLE (0x0<<16) 129 #define PORTSC_PTC_JSTATE (0x1<<16) 130 #define PORTSC_PTC_KSTATE (0x2<<16) 131 #define PORTSC_PTC_SEQNAK (0x3<<16) 132 #define PORTSC_PTC_PACKET (0x4<<16) 133 #define PORTSC_PTC_FORCE_EN (0x5<<16) 134 #define PORTSC_PTC_BIT_POS (16) 135 136 /* bit 27-26 are port speed */ 137 #define PORTSC_PORT_SPEED_FULL (0x0<<26) 138 #define PORTSC_PORT_SPEED_LOW (0x1<<26) 139 #define PORTSC_PORT_SPEED_HIGH (0x2<<26) 140 #define PORTSC_PORT_SPEED_UNDEF (0x3<<26) 141 #define PORTSC_SPEED_BIT_POS (26) 142 143 /* bit 28 is parallel transceiver width for UTMI interface */ 144 #define PORTSC_PTW (0x1<<28) 145 #define PORTSC_PTW_8BIT (0x0<<28) 146 #define PORTSC_PTW_16BIT (0x1<<28) 147 148 /* bit 31-30 are port transceiver select */ 149 #define PORTSC_PTS_UTMI (0x0<<30) 150 #define PORTSC_PTS_ULPI (0x2<<30) 151 #define PORTSC_PTS_FSLS_SERIAL (0x3<<30) 152 #define PORTSC_PTS_BIT_POS (30) 153 154 #define PORTSC_W1C_BITS \ 155 (PORTSC_CONNECT_STATUS_CHANGE | \ 156 PORTSC_PORT_EN_DIS_CHANGE | \ 157 PORTSC_OVER_CUURENT_CHG) 158 159 /* OTG Status Control Register Bit Masks */ 160 #define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0) 161 #define OTGSC_CTRL_VBUS_CHARGE (0x1<<1) 162 #define OTGSC_CTRL_OTG_TERMINATION (0x1<<3) 163 #define OTGSC_CTRL_DATA_PULSING (0x1<<4) 164 #define OTGSC_CTRL_ID_PULL_EN (0x1<<5) 165 #define OTGSC_HA_DATA_PULSE (0x1<<6) 166 #define OTGSC_HA_BA (0x1<<7) 167 #define OTGSC_STS_USB_ID (0x1<<8) 168 #define OTGSC_STS_A_VBUS_VALID (0x1<<9) 169 #define OTGSC_STS_A_SESSION_VALID (0x1<<10) 170 #define OTGSC_STS_B_SESSION_VALID (0x1<<11) 171 #define OTGSC_STS_B_SESSION_END (0x1<<12) 172 #define OTGSC_STS_1MS_TOGGLE (0x1<<13) 173 #define OTGSC_STS_DATA_PULSING (0x1<<14) 174 #define OTGSC_INTSTS_USB_ID (0x1<<16) 175 #define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17) 176 #define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18) 177 #define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19) 178 #define OTGSC_INTSTS_B_SESSION_END (0x1<<20) 179 #define OTGSC_INTSTS_1MS (0x1<<21) 180 #define OTGSC_INTSTS_DATA_PULSING (0x1<<22) 181 #define OTGSC_INTR_USB_ID_EN (0x1<<24) 182 #define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25) 183 #define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26) 184 #define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27) 185 #define OTGSC_INTR_B_SESSION_END_EN (0x1<<28) 186 #define OTGSC_INTR_1MS_TIMER_EN (0x1<<29) 187 #define OTGSC_INTR_DATA_PULSING_EN (0x1<<30) 188 #define OTGSC_INTSTS_MASK (0x00ff0000) 189 190 /* USB MODE Register Bit Masks */ 191 #define USB_MODE_CTRL_MODE_IDLE (0x0<<0) 192 #define USB_MODE_CTRL_MODE_DEVICE (0x2<<0) 193 #define USB_MODE_CTRL_MODE_HOST (0x3<<0) 194 #define USB_MODE_CTRL_MODE_RSV (0x1<<0) 195 #define USB_MODE_SETUP_LOCK_OFF (0x1<<3) 196 #define USB_MODE_STREAM_DISABLE (0x1<<4) 197 #define USB_MODE_ES (0x1<<2) /* Endian Select */ 198 199 /* control Register Bit Masks */ 200 #define USB_CTRL_IOENB (0x1<<2) 201 #define USB_CTRL_ULPI_INT0EN (0x1<<0) 202 203 /* BCSR5 */ 204 #define BCSR5_INT_USB (0x02) 205 206 /* USB module clk cfg */ 207 #define SCCR_OFFS (0xA08) 208 #define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */ 209 #define SCCR_USB_MPHCM_11 (0x00c00000) 210 #define SCCR_USB_MPHCM_01 (0x00400000) 211 #define SCCR_USB_MPHCM_10 (0x00800000) 212 #define SCCR_USB_DRCM_11 (0x00300000) 213 #define SCCR_USB_DRCM_01 (0x00100000) 214 #define SCCR_USB_DRCM_10 (0x00200000) 215 216 #define SICRL_OFFS (0x114) 217 #define SICRL_USB0 (0x40000000) 218 #define SICRL_USB1 (0x20000000) 219 220 #define SICRH_OFFS (0x118) 221 #define SICRH_USB_UTMI (0x00020000) 222 223 /* OTG interrupt enable bit masks */ 224 #define OTGSC_INTERRUPT_ENABLE_BITS_MASK \ 225 (OTGSC_INTR_USB_ID_EN | \ 226 OTGSC_INTR_1MS_TIMER_EN | \ 227 OTGSC_INTR_A_VBUS_VALID_EN | \ 228 OTGSC_INTR_A_SESSION_VALID_EN | \ 229 OTGSC_INTR_B_SESSION_VALID_EN | \ 230 OTGSC_INTR_B_SESSION_END_EN | \ 231 OTGSC_INTR_DATA_PULSING_EN) 232 233 /* OTG interrupt status bit masks */ 234 #define OTGSC_INTERRUPT_STATUS_BITS_MASK \ 235 (OTGSC_INTSTS_USB_ID | \ 236 OTGSC_INTR_1MS_TIMER_EN | \ 237 OTGSC_INTSTS_A_VBUS_VALID | \ 238 OTGSC_INTSTS_A_SESSION_VALID | \ 239 OTGSC_INTSTS_B_SESSION_VALID | \ 240 OTGSC_INTSTS_B_SESSION_END | \ 241 OTGSC_INTSTS_DATA_PULSING) 242 243 /* 244 * A-DEVICE timing constants 245 */ 246 247 /* Wait for VBUS Rise */ 248 #define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */ 249 250 /* Wait for B-Connect */ 251 #define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2 252 * This is only used to get out of 253 * OTG_STATE_A_WAIT_BCON state if there was 254 * no connection for these many milliseconds 255 */ 256 257 /* A-Idle to B-Disconnect */ 258 /* It is necessary for this timer to be more than 750 ms because of a bug in OPT 259 * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated 260 * in the test description 261 */ 262 #define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */ 263 264 /* B-Idle to A-Disconnect */ 265 #define TA_BIDL_ADIS (12) /* 3 to 200 ms */ 266 267 /* B-device timing constants */ 268 269 270 /* Data-Line Pulse Time*/ 271 #define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */ 272 #define TB_DATA_PLS_MIN (5) /* minimum 5 ms */ 273 #define TB_DATA_PLS_MAX (10) /* maximum 10 ms */ 274 275 /* SRP Initiate Time */ 276 #define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */ 277 278 /* SRP Fail Time */ 279 #define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/ 280 281 /* SRP result wait time */ 282 #define TB_SRP_WAIT (60) 283 284 /* VBus time */ 285 #define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */ 286 287 /* Discharge time */ 288 /* This time should be less than 10ms. It varies from system to system. */ 289 #define TB_VBUS_DSCHRG (8) 290 291 /* A-SE0 to B-Reset */ 292 #define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */ 293 294 /* A bus suspend timer before we can switch to b_wait_aconn */ 295 #define TB_A_SUSPEND (7) 296 #define TB_BUS_RESUME (12) 297 298 /* SE0 Time Before SRP */ 299 #define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ 300 301 #define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) 302 303 struct usb_dr_mmap { 304 /* Capability register */ 305 u8 res1[256]; 306 u16 caplength; /* Capability Register Length */ 307 u16 hciversion; /* Host Controller Interface Version */ 308 u32 hcsparams; /* Host Controller Structual Parameters */ 309 u32 hccparams; /* Host Controller Capability Parameters */ 310 u8 res2[20]; 311 u32 dciversion; /* Device Controller Interface Version */ 312 u32 dccparams; /* Device Controller Capability Parameters */ 313 u8 res3[24]; 314 /* Operation register */ 315 u32 usbcmd; /* USB Command Register */ 316 u32 usbsts; /* USB Status Register */ 317 u32 usbintr; /* USB Interrupt Enable Register */ 318 u32 frindex; /* Frame Index Register */ 319 u8 res4[4]; 320 u32 deviceaddr; /* Device Address */ 321 u32 endpointlistaddr; /* Endpoint List Address Register */ 322 u8 res5[4]; 323 u32 burstsize; /* Master Interface Data Burst Size Register */ 324 u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ 325 u8 res6[8]; 326 u32 ulpiview; /* ULPI register access */ 327 u8 res7[12]; 328 u32 configflag; /* Configure Flag Register */ 329 u32 portsc; /* Port 1 Status and Control Register */ 330 u8 res8[28]; 331 u32 otgsc; /* On-The-Go Status and Control */ 332 u32 usbmode; /* USB Mode Register */ 333 u32 endptsetupstat; /* Endpoint Setup Status Register */ 334 u32 endpointprime; /* Endpoint Initialization Register */ 335 u32 endptflush; /* Endpoint Flush Register */ 336 u32 endptstatus; /* Endpoint Status Register */ 337 u32 endptcomplete; /* Endpoint Complete Register */ 338 u32 endptctrl[6]; /* Endpoint Control Registers */ 339 u8 res9[552]; 340 u32 snoop1; 341 u32 snoop2; 342 u32 age_cnt_thresh; /* Age Count Threshold Register */ 343 u32 pri_ctrl; /* Priority Control Register */ 344 u32 si_ctrl; /* System Interface Control Register */ 345 u8 res10[236]; 346 u32 control; /* General Purpose Control Register */ 347 }; 348 349 struct fsl_otg_timer { 350 unsigned long expires; /* Number of count increase to timeout */ 351 unsigned long count; /* Tick counter */ 352 void (*function)(unsigned long); /* Timeout function */ 353 unsigned long data; /* Data passed to function */ 354 struct list_head list; 355 }; 356 357 inline struct fsl_otg_timer *otg_timer_initializer 358 (void (*function)(unsigned long), unsigned long expires, unsigned long data) 359 { 360 struct fsl_otg_timer *timer; 361 362 timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL); 363 if (!timer) 364 return NULL; 365 timer->function = function; 366 timer->expires = expires; 367 timer->data = data; 368 return timer; 369 } 370 371 struct fsl_otg { 372 struct usb_phy phy; 373 struct otg_fsm fsm; 374 struct usb_dr_mmap *dr_mem_map; 375 struct delayed_work otg_event; 376 377 /* used for usb host */ 378 struct work_struct work_wq; 379 u8 host_working; 380 381 int irq; 382 }; 383 384 struct fsl_otg_config { 385 u8 otg_port; 386 }; 387 388 /* For SRP and HNP handle */ 389 #define FSL_OTG_MAJOR 240 390 #define FSL_OTG_NAME "fsl-usb2-otg" 391 /* Command to OTG driver ioctl */ 392 #define OTG_IOCTL_MAGIC FSL_OTG_MAJOR 393 /* if otg work as host, it should return 1, otherwise return 0 */ 394 #define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int) 395 #define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int) 396 #define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int) 397 #define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int) 398 #define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int) 399 #define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int) 400 #define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int) 401 #define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) 402 #define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) 403 404 void fsl_otg_add_timer(void *timer); 405 void fsl_otg_del_timer(void *timer); 406 void fsl_otg_pulse_vbus(void); 407