1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2007,2008 Freescale semiconductor, Inc. 4 * 5 * Author: Li Yang <LeoLi@freescale.com> 6 * Jerry Huang <Chang-Ming.Huang@freescale.com> 7 * 8 * Initialization based on code from Shlomi Gridish. 9 */ 10 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/delay.h> 14 #include <linux/slab.h> 15 #include <linux/proc_fs.h> 16 #include <linux/errno.h> 17 #include <linux/interrupt.h> 18 #include <linux/io.h> 19 #include <linux/timer.h> 20 #include <linux/usb.h> 21 #include <linux/device.h> 22 #include <linux/usb/ch9.h> 23 #include <linux/usb/gadget.h> 24 #include <linux/workqueue.h> 25 #include <linux/time.h> 26 #include <linux/fsl_devices.h> 27 #include <linux/platform_device.h> 28 #include <linux/uaccess.h> 29 30 #include <asm/unaligned.h> 31 32 #include "phy-fsl-usb.h" 33 34 #ifdef VERBOSE 35 #define VDBG(fmt, args...) pr_debug("[%s] " fmt, \ 36 __func__, ## args) 37 #else 38 #define VDBG(stuff...) do {} while (0) 39 #endif 40 41 #define DRIVER_VERSION "Rev. 1.55" 42 #define DRIVER_AUTHOR "Jerry Huang/Li Yang" 43 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver" 44 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION 45 46 static const char driver_name[] = "fsl-usb2-otg"; 47 48 const pm_message_t otg_suspend_state = { 49 .event = 1, 50 }; 51 52 #define HA_DATA_PULSE 53 54 static struct usb_dr_mmap *usb_dr_regs; 55 static struct fsl_otg *fsl_otg_dev; 56 static int srp_wait_done; 57 58 /* FSM timers */ 59 struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, 60 *b_ase0_brst_tmr, *b_se0_srp_tmr; 61 62 /* Driver specific timers */ 63 struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, 64 *b_srp_wait_tmr, *a_wait_enum_tmr; 65 66 static struct list_head active_timers; 67 68 static const struct fsl_otg_config fsl_otg_initdata = { 69 .otg_port = 1, 70 }; 71 72 #ifdef CONFIG_PPC32 73 static u32 _fsl_readl_be(const unsigned __iomem *p) 74 { 75 return in_be32(p); 76 } 77 78 static u32 _fsl_readl_le(const unsigned __iomem *p) 79 { 80 return in_le32(p); 81 } 82 83 static void _fsl_writel_be(u32 v, unsigned __iomem *p) 84 { 85 out_be32(p, v); 86 } 87 88 static void _fsl_writel_le(u32 v, unsigned __iomem *p) 89 { 90 out_le32(p, v); 91 } 92 93 static u32 (*_fsl_readl)(const unsigned __iomem *p); 94 static void (*_fsl_writel)(u32 v, unsigned __iomem *p); 95 96 #define fsl_readl(p) (*_fsl_readl)((p)) 97 #define fsl_writel(v, p) (*_fsl_writel)((v), (p)) 98 99 #else 100 #define fsl_readl(addr) readl(addr) 101 #define fsl_writel(val, addr) writel(val, addr) 102 #endif /* CONFIG_PPC32 */ 103 104 int write_ulpi(u8 addr, u8 data) 105 { 106 u32 temp; 107 108 temp = 0x60000000 | (addr << 16) | data; 109 fsl_writel(temp, &usb_dr_regs->ulpiview); 110 return 0; 111 } 112 113 /* -------------------------------------------------------------*/ 114 /* Operations that will be called from OTG Finite State Machine */ 115 116 /* Charge vbus for vbus pulsing in SRP */ 117 void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on) 118 { 119 u32 tmp; 120 121 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 122 123 if (on) 124 /* stop discharging, start charging */ 125 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) | 126 OTGSC_CTRL_VBUS_CHARGE; 127 else 128 /* stop charging */ 129 tmp &= ~OTGSC_CTRL_VBUS_CHARGE; 130 131 fsl_writel(tmp, &usb_dr_regs->otgsc); 132 } 133 134 /* Discharge vbus through a resistor to ground */ 135 void fsl_otg_dischrg_vbus(int on) 136 { 137 u32 tmp; 138 139 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 140 141 if (on) 142 /* stop charging, start discharging */ 143 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) | 144 OTGSC_CTRL_VBUS_DISCHARGE; 145 else 146 /* stop discharging */ 147 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; 148 149 fsl_writel(tmp, &usb_dr_regs->otgsc); 150 } 151 152 /* A-device driver vbus, controlled through PP bit in PORTSC */ 153 void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on) 154 { 155 u32 tmp; 156 157 if (on) { 158 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS; 159 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc); 160 } else { 161 tmp = fsl_readl(&usb_dr_regs->portsc) & 162 ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER; 163 fsl_writel(tmp, &usb_dr_regs->portsc); 164 } 165 } 166 167 /* 168 * Pull-up D+, signalling connect by periperal. Also used in 169 * data-line pulsing in SRP 170 */ 171 void fsl_otg_loc_conn(struct otg_fsm *fsm, int on) 172 { 173 u32 tmp; 174 175 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 176 177 if (on) 178 tmp |= OTGSC_CTRL_DATA_PULSING; 179 else 180 tmp &= ~OTGSC_CTRL_DATA_PULSING; 181 182 fsl_writel(tmp, &usb_dr_regs->otgsc); 183 } 184 185 /* 186 * Generate SOF by host. This is controlled through suspend/resume the 187 * port. In host mode, controller will automatically send SOF. 188 * Suspend will block the data on the port. 189 */ 190 void fsl_otg_loc_sof(struct otg_fsm *fsm, int on) 191 { 192 u32 tmp; 193 194 tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS; 195 if (on) 196 tmp |= PORTSC_PORT_FORCE_RESUME; 197 else 198 tmp |= PORTSC_PORT_SUSPEND; 199 200 fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc); 201 202 } 203 204 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ 205 void fsl_otg_start_pulse(struct otg_fsm *fsm) 206 { 207 u32 tmp; 208 209 srp_wait_done = 0; 210 #ifdef HA_DATA_PULSE 211 tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; 212 tmp |= OTGSC_HA_DATA_PULSE; 213 fsl_writel(tmp, &usb_dr_regs->otgsc); 214 #else 215 fsl_otg_loc_conn(1); 216 #endif 217 218 fsl_otg_add_timer(fsm, b_data_pulse_tmr); 219 } 220 221 void b_data_pulse_end(unsigned long foo) 222 { 223 #ifdef HA_DATA_PULSE 224 #else 225 fsl_otg_loc_conn(0); 226 #endif 227 228 /* Do VBUS pulse after data pulse */ 229 fsl_otg_pulse_vbus(); 230 } 231 232 void fsl_otg_pulse_vbus(void) 233 { 234 srp_wait_done = 0; 235 fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1); 236 /* start the timer to end vbus charge */ 237 fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr); 238 } 239 240 void b_vbus_pulse_end(unsigned long foo) 241 { 242 fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0); 243 244 /* 245 * As USB3300 using the same a_sess_vld and b_sess_vld voltage 246 * we need to discharge the bus for a while to distinguish 247 * residual voltage of vbus pulsing and A device pull up 248 */ 249 fsl_otg_dischrg_vbus(1); 250 fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr); 251 } 252 253 void b_srp_end(unsigned long foo) 254 { 255 fsl_otg_dischrg_vbus(0); 256 srp_wait_done = 1; 257 258 if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) && 259 fsl_otg_dev->fsm.b_sess_vld) 260 fsl_otg_dev->fsm.b_srp_done = 1; 261 } 262 263 /* 264 * Workaround for a_host suspending too fast. When a_bus_req=0, 265 * a_host will start by SRP. It needs to set b_hnp_enable before 266 * actually suspending to start HNP 267 */ 268 void a_wait_enum(unsigned long foo) 269 { 270 VDBG("a_wait_enum timeout\n"); 271 if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) 272 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr); 273 else 274 otg_statemachine(&fsl_otg_dev->fsm); 275 } 276 277 /* The timeout callback function to set time out bit */ 278 void set_tmout(unsigned long indicator) 279 { 280 *(int *)indicator = 1; 281 } 282 283 /* Initialize timers */ 284 int fsl_otg_init_timers(struct otg_fsm *fsm) 285 { 286 /* FSM used timers */ 287 a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, 288 (unsigned long)&fsm->a_wait_vrise_tmout); 289 if (!a_wait_vrise_tmr) 290 return -ENOMEM; 291 292 a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, 293 (unsigned long)&fsm->a_wait_bcon_tmout); 294 if (!a_wait_bcon_tmr) 295 return -ENOMEM; 296 297 a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, 298 (unsigned long)&fsm->a_aidl_bdis_tmout); 299 if (!a_aidl_bdis_tmr) 300 return -ENOMEM; 301 302 b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, 303 (unsigned long)&fsm->b_ase0_brst_tmout); 304 if (!b_ase0_brst_tmr) 305 return -ENOMEM; 306 307 b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, 308 (unsigned long)&fsm->b_se0_srp); 309 if (!b_se0_srp_tmr) 310 return -ENOMEM; 311 312 b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, 313 (unsigned long)&fsm->b_srp_done); 314 if (!b_srp_fail_tmr) 315 return -ENOMEM; 316 317 a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, 318 (unsigned long)&fsm); 319 if (!a_wait_enum_tmr) 320 return -ENOMEM; 321 322 /* device driver used timers */ 323 b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); 324 if (!b_srp_wait_tmr) 325 return -ENOMEM; 326 327 b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, 328 TB_DATA_PLS, 0); 329 if (!b_data_pulse_tmr) 330 return -ENOMEM; 331 332 b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, 333 TB_VBUS_PLS, 0); 334 if (!b_vbus_pulse_tmr) 335 return -ENOMEM; 336 337 return 0; 338 } 339 340 /* Uninitialize timers */ 341 void fsl_otg_uninit_timers(void) 342 { 343 /* FSM used timers */ 344 kfree(a_wait_vrise_tmr); 345 kfree(a_wait_bcon_tmr); 346 kfree(a_aidl_bdis_tmr); 347 kfree(b_ase0_brst_tmr); 348 kfree(b_se0_srp_tmr); 349 kfree(b_srp_fail_tmr); 350 kfree(a_wait_enum_tmr); 351 352 /* device driver used timers */ 353 kfree(b_srp_wait_tmr); 354 kfree(b_data_pulse_tmr); 355 kfree(b_vbus_pulse_tmr); 356 } 357 358 static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t) 359 { 360 struct fsl_otg_timer *timer; 361 362 /* REVISIT: use array of pointers to timers instead */ 363 switch (t) { 364 case A_WAIT_VRISE: 365 timer = a_wait_vrise_tmr; 366 break; 367 case A_WAIT_BCON: 368 timer = a_wait_vrise_tmr; 369 break; 370 case A_AIDL_BDIS: 371 timer = a_wait_vrise_tmr; 372 break; 373 case B_ASE0_BRST: 374 timer = a_wait_vrise_tmr; 375 break; 376 case B_SE0_SRP: 377 timer = a_wait_vrise_tmr; 378 break; 379 case B_SRP_FAIL: 380 timer = a_wait_vrise_tmr; 381 break; 382 case A_WAIT_ENUM: 383 timer = a_wait_vrise_tmr; 384 break; 385 default: 386 timer = NULL; 387 } 388 389 return timer; 390 } 391 392 /* Add timer to timer list */ 393 void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer) 394 { 395 struct fsl_otg_timer *timer = gtimer; 396 struct fsl_otg_timer *tmp_timer; 397 398 /* 399 * Check if the timer is already in the active list, 400 * if so update timer count 401 */ 402 list_for_each_entry(tmp_timer, &active_timers, list) 403 if (tmp_timer == timer) { 404 timer->count = timer->expires; 405 return; 406 } 407 timer->count = timer->expires; 408 list_add_tail(&timer->list, &active_timers); 409 } 410 411 static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) 412 { 413 struct fsl_otg_timer *timer; 414 415 timer = fsl_otg_get_timer(t); 416 if (!timer) 417 return; 418 419 fsl_otg_add_timer(fsm, timer); 420 } 421 422 /* Remove timer from the timer list; clear timeout status */ 423 void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer) 424 { 425 struct fsl_otg_timer *timer = gtimer; 426 struct fsl_otg_timer *tmp_timer, *del_tmp; 427 428 list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) 429 if (tmp_timer == timer) 430 list_del(&timer->list); 431 } 432 433 static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t) 434 { 435 struct fsl_otg_timer *timer; 436 437 timer = fsl_otg_get_timer(t); 438 if (!timer) 439 return; 440 441 fsl_otg_del_timer(fsm, timer); 442 } 443 444 /* Reset controller, not reset the bus */ 445 void otg_reset_controller(void) 446 { 447 u32 command; 448 449 command = fsl_readl(&usb_dr_regs->usbcmd); 450 command |= (1 << 1); 451 fsl_writel(command, &usb_dr_regs->usbcmd); 452 while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1)) 453 ; 454 } 455 456 /* Call suspend/resume routines in host driver */ 457 int fsl_otg_start_host(struct otg_fsm *fsm, int on) 458 { 459 struct usb_otg *otg = fsm->otg; 460 struct device *dev; 461 struct fsl_otg *otg_dev = 462 container_of(otg->usb_phy, struct fsl_otg, phy); 463 u32 retval = 0; 464 465 if (!otg->host) 466 return -ENODEV; 467 dev = otg->host->controller; 468 469 /* 470 * Update a_vbus_vld state as a_vbus_vld int is disabled 471 * in device mode 472 */ 473 fsm->a_vbus_vld = 474 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); 475 if (on) { 476 /* start fsl usb host controller */ 477 if (otg_dev->host_working) 478 goto end; 479 else { 480 otg_reset_controller(); 481 VDBG("host on......\n"); 482 if (dev->driver->pm && dev->driver->pm->resume) { 483 retval = dev->driver->pm->resume(dev); 484 if (fsm->id) { 485 /* default-b */ 486 fsl_otg_drv_vbus(fsm, 1); 487 /* 488 * Workaround: b_host can't driver 489 * vbus, but PP in PORTSC needs to 490 * be 1 for host to work. 491 * So we set drv_vbus bit in 492 * transceiver to 0 thru ULPI. 493 */ 494 write_ulpi(0x0c, 0x20); 495 } 496 } 497 498 otg_dev->host_working = 1; 499 } 500 } else { 501 /* stop fsl usb host controller */ 502 if (!otg_dev->host_working) 503 goto end; 504 else { 505 VDBG("host off......\n"); 506 if (dev && dev->driver) { 507 if (dev->driver->pm && dev->driver->pm->suspend) 508 retval = dev->driver->pm->suspend(dev); 509 if (fsm->id) 510 /* default-b */ 511 fsl_otg_drv_vbus(fsm, 0); 512 } 513 otg_dev->host_working = 0; 514 } 515 } 516 end: 517 return retval; 518 } 519 520 /* 521 * Call suspend and resume function in udc driver 522 * to stop and start udc driver. 523 */ 524 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) 525 { 526 struct usb_otg *otg = fsm->otg; 527 struct device *dev; 528 529 if (!otg->gadget || !otg->gadget->dev.parent) 530 return -ENODEV; 531 532 VDBG("gadget %s\n", on ? "on" : "off"); 533 dev = otg->gadget->dev.parent; 534 535 if (on) { 536 if (dev->driver->resume) 537 dev->driver->resume(dev); 538 } else { 539 if (dev->driver->suspend) 540 dev->driver->suspend(dev, otg_suspend_state); 541 } 542 543 return 0; 544 } 545 546 /* 547 * Called by initialization code of host driver. Register host controller 548 * to the OTG. Suspend host for OTG role detection. 549 */ 550 static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) 551 { 552 struct fsl_otg *otg_dev; 553 554 if (!otg) 555 return -ENODEV; 556 557 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 558 if (otg_dev != fsl_otg_dev) 559 return -ENODEV; 560 561 otg->host = host; 562 563 otg_dev->fsm.a_bus_drop = 0; 564 otg_dev->fsm.a_bus_req = 1; 565 566 if (host) { 567 VDBG("host off......\n"); 568 569 otg->host->otg_port = fsl_otg_initdata.otg_port; 570 otg->host->is_b_host = otg_dev->fsm.id; 571 /* 572 * must leave time for hub_wq to finish its thing 573 * before yanking the host driver out from under it, 574 * so suspend the host after a short delay. 575 */ 576 otg_dev->host_working = 1; 577 schedule_delayed_work(&otg_dev->otg_event, 100); 578 return 0; 579 } else { 580 /* host driver going away */ 581 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) & 582 OTGSC_STS_USB_ID)) { 583 /* Mini-A cable connected */ 584 struct otg_fsm *fsm = &otg_dev->fsm; 585 586 otg->state = OTG_STATE_UNDEFINED; 587 fsm->protocol = PROTO_UNDEF; 588 } 589 } 590 591 otg_dev->host_working = 0; 592 593 otg_statemachine(&otg_dev->fsm); 594 595 return 0; 596 } 597 598 /* Called by initialization code of udc. Register udc to OTG. */ 599 static int fsl_otg_set_peripheral(struct usb_otg *otg, 600 struct usb_gadget *gadget) 601 { 602 struct fsl_otg *otg_dev; 603 604 if (!otg) 605 return -ENODEV; 606 607 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 608 VDBG("otg_dev 0x%x\n", (int)otg_dev); 609 VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); 610 if (otg_dev != fsl_otg_dev) 611 return -ENODEV; 612 613 if (!gadget) { 614 if (!otg->default_a) 615 otg->gadget->ops->vbus_draw(otg->gadget, 0); 616 usb_gadget_vbus_disconnect(otg->gadget); 617 otg->gadget = 0; 618 otg_dev->fsm.b_bus_req = 0; 619 otg_statemachine(&otg_dev->fsm); 620 return 0; 621 } 622 623 otg->gadget = gadget; 624 otg->gadget->is_a_peripheral = !otg_dev->fsm.id; 625 626 otg_dev->fsm.b_bus_req = 1; 627 628 /* start the gadget right away if the ID pin says Mini-B */ 629 pr_debug("ID pin=%d\n", otg_dev->fsm.id); 630 if (otg_dev->fsm.id == 1) { 631 fsl_otg_start_host(&otg_dev->fsm, 0); 632 otg_drv_vbus(&otg_dev->fsm, 0); 633 fsl_otg_start_gadget(&otg_dev->fsm, 1); 634 } 635 636 return 0; 637 } 638 639 /* 640 * Delayed pin detect interrupt processing. 641 * 642 * When the Mini-A cable is disconnected from the board, 643 * the pin-detect interrupt happens before the disconnect 644 * interrupts for the connected device(s). In order to 645 * process the disconnect interrupt(s) prior to switching 646 * roles, the pin-detect interrupts are delayed, and handled 647 * by this routine. 648 */ 649 static void fsl_otg_event(struct work_struct *work) 650 { 651 struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); 652 struct otg_fsm *fsm = &og->fsm; 653 654 if (fsm->id) { /* switch to gadget */ 655 fsl_otg_start_host(fsm, 0); 656 otg_drv_vbus(fsm, 0); 657 fsl_otg_start_gadget(fsm, 1); 658 } 659 } 660 661 /* B-device start SRP */ 662 static int fsl_otg_start_srp(struct usb_otg *otg) 663 { 664 struct fsl_otg *otg_dev; 665 666 if (!otg || otg->state != OTG_STATE_B_IDLE) 667 return -ENODEV; 668 669 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 670 if (otg_dev != fsl_otg_dev) 671 return -ENODEV; 672 673 otg_dev->fsm.b_bus_req = 1; 674 otg_statemachine(&otg_dev->fsm); 675 676 return 0; 677 } 678 679 /* A_host suspend will call this function to start hnp */ 680 static int fsl_otg_start_hnp(struct usb_otg *otg) 681 { 682 struct fsl_otg *otg_dev; 683 684 if (!otg) 685 return -ENODEV; 686 687 otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy); 688 if (otg_dev != fsl_otg_dev) 689 return -ENODEV; 690 691 pr_debug("start_hnp...\n"); 692 693 /* clear a_bus_req to enter a_suspend state */ 694 otg_dev->fsm.a_bus_req = 0; 695 otg_statemachine(&otg_dev->fsm); 696 697 return 0; 698 } 699 700 /* 701 * Interrupt handler. OTG/host/peripheral share the same int line. 702 * OTG driver clears OTGSC interrupts and leaves USB interrupts 703 * intact. It needs to have knowledge of some USB interrupts 704 * such as port change. 705 */ 706 irqreturn_t fsl_otg_isr(int irq, void *dev_id) 707 { 708 struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; 709 struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg; 710 u32 otg_int_src, otg_sc; 711 712 otg_sc = fsl_readl(&usb_dr_regs->otgsc); 713 otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); 714 715 /* Only clear otg interrupts */ 716 fsl_writel(otg_sc, &usb_dr_regs->otgsc); 717 718 /*FIXME: ID change not generate when init to 0 */ 719 fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; 720 otg->default_a = (fsm->id == 0); 721 722 /* process OTG interrupts */ 723 if (otg_int_src) { 724 if (otg_int_src & OTGSC_INTSTS_USB_ID) { 725 fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; 726 otg->default_a = (fsm->id == 0); 727 /* clear conn information */ 728 if (fsm->id) 729 fsm->b_conn = 0; 730 else 731 fsm->a_conn = 0; 732 733 if (otg->host) 734 otg->host->is_b_host = fsm->id; 735 if (otg->gadget) 736 otg->gadget->is_a_peripheral = !fsm->id; 737 VDBG("ID int (ID is %d)\n", fsm->id); 738 739 if (fsm->id) { /* switch to gadget */ 740 schedule_delayed_work( 741 &((struct fsl_otg *)dev_id)->otg_event, 742 100); 743 } else { /* switch to host */ 744 cancel_delayed_work(& 745 ((struct fsl_otg *)dev_id)-> 746 otg_event); 747 fsl_otg_start_gadget(fsm, 0); 748 otg_drv_vbus(fsm, 1); 749 fsl_otg_start_host(fsm, 1); 750 } 751 return IRQ_HANDLED; 752 } 753 } 754 return IRQ_NONE; 755 } 756 757 static struct otg_fsm_ops fsl_otg_ops = { 758 .chrg_vbus = fsl_otg_chrg_vbus, 759 .drv_vbus = fsl_otg_drv_vbus, 760 .loc_conn = fsl_otg_loc_conn, 761 .loc_sof = fsl_otg_loc_sof, 762 .start_pulse = fsl_otg_start_pulse, 763 764 .add_timer = fsl_otg_fsm_add_timer, 765 .del_timer = fsl_otg_fsm_del_timer, 766 767 .start_host = fsl_otg_start_host, 768 .start_gadget = fsl_otg_start_gadget, 769 }; 770 771 /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ 772 static int fsl_otg_conf(struct platform_device *pdev) 773 { 774 struct fsl_otg *fsl_otg_tc; 775 int status; 776 777 if (fsl_otg_dev) 778 return 0; 779 780 /* allocate space to fsl otg device */ 781 fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); 782 if (!fsl_otg_tc) 783 return -ENOMEM; 784 785 fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); 786 if (!fsl_otg_tc->phy.otg) { 787 kfree(fsl_otg_tc); 788 return -ENOMEM; 789 } 790 791 INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); 792 793 INIT_LIST_HEAD(&active_timers); 794 status = fsl_otg_init_timers(&fsl_otg_tc->fsm); 795 if (status) { 796 pr_info("Couldn't init OTG timers\n"); 797 goto err; 798 } 799 mutex_init(&fsl_otg_tc->fsm.lock); 800 801 /* Set OTG state machine operations */ 802 fsl_otg_tc->fsm.ops = &fsl_otg_ops; 803 804 /* initialize the otg structure */ 805 fsl_otg_tc->phy.label = DRIVER_DESC; 806 fsl_otg_tc->phy.dev = &pdev->dev; 807 808 fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy; 809 fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host; 810 fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral; 811 fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp; 812 fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp; 813 814 fsl_otg_dev = fsl_otg_tc; 815 816 /* Store the otg transceiver */ 817 status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2); 818 if (status) { 819 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); 820 goto err; 821 } 822 823 return 0; 824 err: 825 fsl_otg_uninit_timers(); 826 kfree(fsl_otg_tc->phy.otg); 827 kfree(fsl_otg_tc); 828 return status; 829 } 830 831 /* OTG Initialization */ 832 int usb_otg_start(struct platform_device *pdev) 833 { 834 struct fsl_otg *p_otg; 835 struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2); 836 struct otg_fsm *fsm; 837 int status; 838 struct resource *res; 839 u32 temp; 840 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); 841 842 p_otg = container_of(otg_trans, struct fsl_otg, phy); 843 fsm = &p_otg->fsm; 844 845 /* Initialize the state machine structure with default values */ 846 SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); 847 fsm->otg = p_otg->phy.otg; 848 849 /* We don't require predefined MEM/IRQ resource index */ 850 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 851 if (!res) 852 return -ENXIO; 853 854 /* We don't request_mem_region here to enable resource sharing 855 * with host/device */ 856 857 usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap)); 858 p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs; 859 pdata->regs = (void *)usb_dr_regs; 860 861 if (pdata->init && pdata->init(pdev) != 0) 862 return -EINVAL; 863 864 #ifdef CONFIG_PPC32 865 if (pdata->big_endian_mmio) { 866 _fsl_readl = _fsl_readl_be; 867 _fsl_writel = _fsl_writel_be; 868 } else { 869 _fsl_readl = _fsl_readl_le; 870 _fsl_writel = _fsl_writel_le; 871 } 872 #endif 873 874 /* request irq */ 875 p_otg->irq = platform_get_irq(pdev, 0); 876 if (p_otg->irq < 0) 877 return p_otg->irq; 878 status = request_irq(p_otg->irq, fsl_otg_isr, 879 IRQF_SHARED, driver_name, p_otg); 880 if (status) { 881 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n", 882 p_otg->irq, status); 883 iounmap(p_otg->dr_mem_map); 884 kfree(p_otg->phy.otg); 885 kfree(p_otg); 886 return status; 887 } 888 889 /* stop the controller */ 890 temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); 891 temp &= ~USB_CMD_RUN_STOP; 892 fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); 893 894 /* reset the controller */ 895 temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); 896 temp |= USB_CMD_CTRL_RESET; 897 fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); 898 899 /* wait reset completed */ 900 while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET) 901 ; 902 903 /* configure the VBUSHS as IDLE(both host and device) */ 904 temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0); 905 fsl_writel(temp, &p_otg->dr_mem_map->usbmode); 906 907 /* configure PHY interface */ 908 temp = fsl_readl(&p_otg->dr_mem_map->portsc); 909 temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW); 910 switch (pdata->phy_mode) { 911 case FSL_USB2_PHY_ULPI: 912 temp |= PORTSC_PTS_ULPI; 913 break; 914 case FSL_USB2_PHY_UTMI_WIDE: 915 temp |= PORTSC_PTW_16BIT; 916 fallthrough; 917 case FSL_USB2_PHY_UTMI: 918 temp |= PORTSC_PTS_UTMI; 919 fallthrough; 920 default: 921 break; 922 } 923 fsl_writel(temp, &p_otg->dr_mem_map->portsc); 924 925 if (pdata->have_sysif_regs) { 926 /* configure control enable IO output, big endian register */ 927 temp = __raw_readl(&p_otg->dr_mem_map->control); 928 temp |= USB_CTRL_IOENB; 929 __raw_writel(temp, &p_otg->dr_mem_map->control); 930 } 931 932 /* disable all interrupt and clear all OTGSC status */ 933 temp = fsl_readl(&p_otg->dr_mem_map->otgsc); 934 temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; 935 temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; 936 fsl_writel(temp, &p_otg->dr_mem_map->otgsc); 937 938 /* 939 * The identification (id) input is FALSE when a Mini-A plug is inserted 940 * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. 941 * Also: record initial state of ID pin 942 */ 943 if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) { 944 p_otg->phy.otg->state = OTG_STATE_UNDEFINED; 945 p_otg->fsm.id = 1; 946 } else { 947 p_otg->phy.otg->state = OTG_STATE_A_IDLE; 948 p_otg->fsm.id = 0; 949 } 950 951 pr_debug("initial ID pin=%d\n", p_otg->fsm.id); 952 953 /* enable OTG ID pin interrupt */ 954 temp = fsl_readl(&p_otg->dr_mem_map->otgsc); 955 temp |= OTGSC_INTR_USB_ID_EN; 956 temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN); 957 fsl_writel(temp, &p_otg->dr_mem_map->otgsc); 958 959 return 0; 960 } 961 962 static int fsl_otg_probe(struct platform_device *pdev) 963 { 964 int ret; 965 966 if (!dev_get_platdata(&pdev->dev)) 967 return -ENODEV; 968 969 /* configure the OTG */ 970 ret = fsl_otg_conf(pdev); 971 if (ret) { 972 dev_err(&pdev->dev, "Couldn't configure OTG module\n"); 973 return ret; 974 } 975 976 /* start OTG */ 977 ret = usb_otg_start(pdev); 978 if (ret) { 979 dev_err(&pdev->dev, "Can't init FSL OTG device\n"); 980 return ret; 981 } 982 983 return ret; 984 } 985 986 static void fsl_otg_remove(struct platform_device *pdev) 987 { 988 struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); 989 990 usb_remove_phy(&fsl_otg_dev->phy); 991 free_irq(fsl_otg_dev->irq, fsl_otg_dev); 992 993 iounmap((void *)usb_dr_regs); 994 995 fsl_otg_uninit_timers(); 996 kfree(fsl_otg_dev->phy.otg); 997 kfree(fsl_otg_dev); 998 999 if (pdata->exit) 1000 pdata->exit(pdev); 1001 } 1002 1003 struct platform_driver fsl_otg_driver = { 1004 .probe = fsl_otg_probe, 1005 .remove_new = fsl_otg_remove, 1006 .driver = { 1007 .name = driver_name, 1008 .owner = THIS_MODULE, 1009 }, 1010 }; 1011 1012 module_platform_driver(fsl_otg_driver); 1013 1014 MODULE_DESCRIPTION(DRIVER_INFO); 1015 MODULE_AUTHOR(DRIVER_AUTHOR); 1016 MODULE_LICENSE("GPL"); 1017