1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/module.h> 3 #include <linux/platform_device.h> 4 #include <linux/dma-mapping.h> 5 #include <linux/usb/otg.h> 6 #include <linux/usb/usb_phy_generic.h> 7 #include <linux/slab.h> 8 #include <linux/clk.h> 9 #include <linux/of.h> 10 #include <linux/of_address.h> 11 #include <linux/usb/of.h> 12 13 #include "phy-am335x-control.h" 14 #include "phy-generic.h" 15 16 struct am335x_phy { 17 struct usb_phy_generic usb_phy_gen; 18 struct phy_control *phy_ctrl; 19 int id; 20 enum usb_dr_mode dr_mode; 21 }; 22 23 static int am335x_init(struct usb_phy *phy) 24 { 25 struct am335x_phy *am_phy = dev_get_drvdata(phy->dev); 26 27 phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true); 28 return 0; 29 } 30 31 static void am335x_shutdown(struct usb_phy *phy) 32 { 33 struct am335x_phy *am_phy = dev_get_drvdata(phy->dev); 34 35 phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false); 36 } 37 38 static int am335x_phy_probe(struct platform_device *pdev) 39 { 40 struct am335x_phy *am_phy; 41 struct device *dev = &pdev->dev; 42 int ret; 43 44 am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL); 45 if (!am_phy) 46 return -ENOMEM; 47 48 am_phy->phy_ctrl = am335x_get_phy_control(dev); 49 if (!am_phy->phy_ctrl) 50 return -EPROBE_DEFER; 51 52 am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy"); 53 if (am_phy->id < 0) { 54 dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id); 55 return am_phy->id; 56 } 57 58 am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1); 59 60 ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL); 61 if (ret) 62 return ret; 63 64 ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy); 65 if (ret) 66 return ret; 67 am_phy->usb_phy_gen.phy.init = am335x_init; 68 am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown; 69 70 platform_set_drvdata(pdev, am_phy); 71 device_init_wakeup(dev, true); 72 73 /* 74 * If we leave PHY wakeup enabled then AM33XX wakes up 75 * immediately from DS0. To avoid this we mark dev->power.can_wakeup 76 * to false. The same is checked in suspend routine to decide 77 * on whether to enable PHY wakeup or not. 78 * PHY wakeup works fine in standby mode, there by allowing us to 79 * handle remote wakeup, wakeup on disconnect and connect. 80 */ 81 82 device_set_wakeup_enable(dev, false); 83 phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false); 84 85 return 0; 86 } 87 88 static int am335x_phy_remove(struct platform_device *pdev) 89 { 90 struct am335x_phy *am_phy = platform_get_drvdata(pdev); 91 92 usb_remove_phy(&am_phy->usb_phy_gen.phy); 93 return 0; 94 } 95 96 #ifdef CONFIG_PM_SLEEP 97 static int am335x_phy_suspend(struct device *dev) 98 { 99 struct platform_device *pdev = to_platform_device(dev); 100 struct am335x_phy *am_phy = platform_get_drvdata(pdev); 101 102 /* 103 * Enable phy wakeup only if dev->power.can_wakeup is true. 104 * Make sure to enable wakeup to support remote wakeup in 105 * standby mode ( same is not supported in OFF(DS0) mode). 106 * Enable it by doing 107 * echo enabled > /sys/bus/platform/devices/<usb-phy-id>/power/wakeup 108 */ 109 110 if (device_may_wakeup(dev)) 111 phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true); 112 113 phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false); 114 115 return 0; 116 } 117 118 static int am335x_phy_resume(struct device *dev) 119 { 120 struct platform_device *pdev = to_platform_device(dev); 121 struct am335x_phy *am_phy = platform_get_drvdata(pdev); 122 123 phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true); 124 125 if (device_may_wakeup(dev)) 126 phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false); 127 128 return 0; 129 } 130 #endif 131 132 static SIMPLE_DEV_PM_OPS(am335x_pm_ops, am335x_phy_suspend, am335x_phy_resume); 133 134 static const struct of_device_id am335x_phy_ids[] = { 135 { .compatible = "ti,am335x-usb-phy" }, 136 { } 137 }; 138 MODULE_DEVICE_TABLE(of, am335x_phy_ids); 139 140 static struct platform_driver am335x_phy_driver = { 141 .probe = am335x_phy_probe, 142 .remove = am335x_phy_remove, 143 .driver = { 144 .name = "am335x-phy-driver", 145 .pm = &am335x_pm_ops, 146 .of_match_table = am335x_phy_ids, 147 }, 148 }; 149 150 module_platform_driver(am335x_phy_driver); 151 MODULE_LICENSE("GPL v2"); 152