xref: /openbmc/linux/drivers/usb/musb/ux500_dma.c (revision 0a907292)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * drivers/usb/musb/ux500_dma.c
4  *
5  * U8500 DMA support code
6  *
7  * Copyright (C) 2009 STMicroelectronics
8  * Copyright (C) 2011 ST-Ericsson SA
9  * Authors:
10  *	Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
11  *	Praveena Nadahally <praveen.nadahally@stericsson.com>
12  *	Rajaram Regupathy <ragupathy.rajaram@stericsson.com>
13  */
14 
15 #include <linux/device.h>
16 #include <linux/interrupt.h>
17 #include <linux/platform_device.h>
18 #include <linux/dma-mapping.h>
19 #include <linux/dmaengine.h>
20 #include <linux/pfn.h>
21 #include <linux/sizes.h>
22 #include <linux/platform_data/usb-musb-ux500.h>
23 #include "musb_core.h"
24 
25 static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
26 					"iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
27 static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
28 					"oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
29 
30 struct ux500_dma_channel {
31 	struct dma_channel channel;
32 	struct ux500_dma_controller *controller;
33 	struct musb_hw_ep *hw_ep;
34 	struct dma_chan *dma_chan;
35 	unsigned int cur_len;
36 	dma_cookie_t cookie;
37 	u8 ch_num;
38 	u8 is_tx;
39 	u8 is_allocated;
40 };
41 
42 struct ux500_dma_controller {
43 	struct dma_controller controller;
44 	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
45 	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
46 	void *private_data;
47 	dma_addr_t phy_base;
48 };
49 
50 /* Work function invoked from DMA callback to handle rx transfers. */
51 static void ux500_dma_callback(void *private_data)
52 {
53 	struct dma_channel *channel = private_data;
54 	struct ux500_dma_channel *ux500_channel = channel->private_data;
55 	struct musb_hw_ep       *hw_ep = ux500_channel->hw_ep;
56 	struct musb *musb = hw_ep->musb;
57 	unsigned long flags;
58 
59 	dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n",
60 		hw_ep->epnum);
61 
62 	spin_lock_irqsave(&musb->lock, flags);
63 	ux500_channel->channel.actual_len = ux500_channel->cur_len;
64 	ux500_channel->channel.status = MUSB_DMA_STATUS_FREE;
65 	musb_dma_completion(musb, hw_ep->epnum, ux500_channel->is_tx);
66 	spin_unlock_irqrestore(&musb->lock, flags);
67 
68 }
69 
70 static bool ux500_configure_channel(struct dma_channel *channel,
71 				u16 packet_sz, u8 mode,
72 				dma_addr_t dma_addr, u32 len)
73 {
74 	struct ux500_dma_channel *ux500_channel = channel->private_data;
75 	struct musb_hw_ep *hw_ep = ux500_channel->hw_ep;
76 	struct dma_chan *dma_chan = ux500_channel->dma_chan;
77 	struct dma_async_tx_descriptor *dma_desc;
78 	enum dma_transfer_direction direction;
79 	struct scatterlist sg;
80 	struct dma_slave_config slave_conf;
81 	enum dma_slave_buswidth addr_width;
82 	struct musb *musb = ux500_channel->controller->private_data;
83 	dma_addr_t usb_fifo_addr = (musb->io.fifo_offset(hw_ep->epnum) +
84 					ux500_channel->controller->phy_base);
85 
86 	dev_dbg(musb->controller,
87 		"packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
88 		packet_sz, mode, (unsigned long long) dma_addr,
89 		len, ux500_channel->is_tx);
90 
91 	ux500_channel->cur_len = len;
92 
93 	sg_init_table(&sg, 1);
94 	sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len,
95 					    offset_in_page(dma_addr));
96 	sg_dma_address(&sg) = dma_addr;
97 	sg_dma_len(&sg) = len;
98 
99 	direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
100 	addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE :
101 					DMA_SLAVE_BUSWIDTH_4_BYTES;
102 
103 	slave_conf.direction = direction;
104 	slave_conf.src_addr = usb_fifo_addr;
105 	slave_conf.src_addr_width = addr_width;
106 	slave_conf.src_maxburst = 16;
107 	slave_conf.dst_addr = usb_fifo_addr;
108 	slave_conf.dst_addr_width = addr_width;
109 	slave_conf.dst_maxburst = 16;
110 	slave_conf.device_fc = false;
111 
112 	dmaengine_slave_config(dma_chan, &slave_conf);
113 
114 	dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction,
115 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
116 	if (!dma_desc)
117 		return false;
118 
119 	dma_desc->callback = ux500_dma_callback;
120 	dma_desc->callback_param = channel;
121 	ux500_channel->cookie = dma_desc->tx_submit(dma_desc);
122 
123 	dma_async_issue_pending(dma_chan);
124 
125 	return true;
126 }
127 
128 static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
129 				struct musb_hw_ep *hw_ep, u8 is_tx)
130 {
131 	struct ux500_dma_controller *controller = container_of(c,
132 			struct ux500_dma_controller, controller);
133 	struct ux500_dma_channel *ux500_channel = NULL;
134 	struct musb *musb = controller->private_data;
135 	u8 ch_num = hw_ep->epnum - 1;
136 
137 	/* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
138 	 * to specified hw_ep. For example DMA channel 0 can only be allocated
139 	 * to hw_ep 1 and 9.
140 	 */
141 	if (ch_num > 7)
142 		ch_num -= 8;
143 
144 	if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
145 		return NULL;
146 
147 	ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
148 				&(controller->rx_channel[ch_num]) ;
149 
150 	/* Check if channel is already used. */
151 	if (ux500_channel->is_allocated)
152 		return NULL;
153 
154 	ux500_channel->hw_ep = hw_ep;
155 	ux500_channel->is_allocated = 1;
156 
157 	dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n",
158 		hw_ep->epnum, is_tx, ch_num);
159 
160 	return &(ux500_channel->channel);
161 }
162 
163 static void ux500_dma_channel_release(struct dma_channel *channel)
164 {
165 	struct ux500_dma_channel *ux500_channel = channel->private_data;
166 	struct musb *musb = ux500_channel->controller->private_data;
167 
168 	dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num);
169 
170 	if (ux500_channel->is_allocated) {
171 		ux500_channel->is_allocated = 0;
172 		channel->status = MUSB_DMA_STATUS_FREE;
173 		channel->actual_len = 0;
174 	}
175 }
176 
177 static int ux500_dma_is_compatible(struct dma_channel *channel,
178 		u16 maxpacket, void *buf, u32 length)
179 {
180 	if ((maxpacket & 0x3)		||
181 		((unsigned long int) buf & 0x3)	||
182 		(length < 512)		||
183 		(length & 0x3))
184 		return false;
185 	else
186 		return true;
187 }
188 
189 static int ux500_dma_channel_program(struct dma_channel *channel,
190 				u16 packet_sz, u8 mode,
191 				dma_addr_t dma_addr, u32 len)
192 {
193 	int ret;
194 
195 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
196 		channel->status == MUSB_DMA_STATUS_BUSY);
197 
198 	channel->status = MUSB_DMA_STATUS_BUSY;
199 	channel->actual_len = 0;
200 	ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len);
201 	if (!ret)
202 		channel->status = MUSB_DMA_STATUS_FREE;
203 
204 	return ret;
205 }
206 
207 static int ux500_dma_channel_abort(struct dma_channel *channel)
208 {
209 	struct ux500_dma_channel *ux500_channel = channel->private_data;
210 	struct ux500_dma_controller *controller = ux500_channel->controller;
211 	struct musb *musb = controller->private_data;
212 	void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs;
213 	u16 csr;
214 
215 	dev_dbg(musb->controller, "channel=%d, is_tx=%d\n",
216 		ux500_channel->ch_num, ux500_channel->is_tx);
217 
218 	if (channel->status == MUSB_DMA_STATUS_BUSY) {
219 		if (ux500_channel->is_tx) {
220 			csr = musb_readw(epio, MUSB_TXCSR);
221 			csr &= ~(MUSB_TXCSR_AUTOSET |
222 				 MUSB_TXCSR_DMAENAB |
223 				 MUSB_TXCSR_DMAMODE);
224 			musb_writew(epio, MUSB_TXCSR, csr);
225 		} else {
226 			csr = musb_readw(epio, MUSB_RXCSR);
227 			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
228 				 MUSB_RXCSR_DMAENAB |
229 				 MUSB_RXCSR_DMAMODE);
230 			musb_writew(epio, MUSB_RXCSR, csr);
231 		}
232 
233 		dmaengine_terminate_all(ux500_channel->dma_chan);
234 		channel->status = MUSB_DMA_STATUS_FREE;
235 	}
236 	return 0;
237 }
238 
239 static void ux500_dma_controller_stop(struct ux500_dma_controller *controller)
240 {
241 	struct ux500_dma_channel *ux500_channel;
242 	struct dma_channel *channel;
243 	u8 ch_num;
244 
245 	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
246 		channel = &controller->rx_channel[ch_num].channel;
247 		ux500_channel = channel->private_data;
248 
249 		ux500_dma_channel_release(channel);
250 
251 		if (ux500_channel->dma_chan)
252 			dma_release_channel(ux500_channel->dma_chan);
253 	}
254 
255 	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
256 		channel = &controller->tx_channel[ch_num].channel;
257 		ux500_channel = channel->private_data;
258 
259 		ux500_dma_channel_release(channel);
260 
261 		if (ux500_channel->dma_chan)
262 			dma_release_channel(ux500_channel->dma_chan);
263 	}
264 }
265 
266 static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
267 {
268 	struct ux500_dma_channel *ux500_channel = NULL;
269 	struct musb *musb = controller->private_data;
270 	struct device *dev = musb->controller;
271 	struct musb_hdrc_platform_data *plat = dev_get_platdata(dev);
272 	struct ux500_musb_board_data *data;
273 	struct dma_channel *dma_channel = NULL;
274 	char **chan_names;
275 	u32 ch_num;
276 	u8 dir;
277 	u8 is_tx = 0;
278 
279 	void **param_array;
280 	struct ux500_dma_channel *channel_array;
281 	dma_cap_mask_t mask;
282 
283 	if (!plat) {
284 		dev_err(musb->controller, "No platform data\n");
285 		return -EINVAL;
286 	}
287 
288 	data = plat->board_data;
289 
290 	dma_cap_zero(mask);
291 	dma_cap_set(DMA_SLAVE, mask);
292 
293 	/* Prepare the loop for RX channels */
294 	channel_array = controller->rx_channel;
295 	param_array = data ? data->dma_rx_param_array : NULL;
296 	chan_names = (char **)iep_chan_names;
297 
298 	for (dir = 0; dir < 2; dir++) {
299 		for (ch_num = 0;
300 		     ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
301 		     ch_num++) {
302 			ux500_channel = &channel_array[ch_num];
303 			ux500_channel->controller = controller;
304 			ux500_channel->ch_num = ch_num;
305 			ux500_channel->is_tx = is_tx;
306 
307 			dma_channel = &(ux500_channel->channel);
308 			dma_channel->private_data = ux500_channel;
309 			dma_channel->status = MUSB_DMA_STATUS_FREE;
310 			dma_channel->max_len = SZ_16M;
311 
312 			ux500_channel->dma_chan =
313 				dma_request_chan(dev, chan_names[ch_num]);
314 
315 			if (IS_ERR(ux500_channel->dma_chan))
316 				ux500_channel->dma_chan =
317 					dma_request_channel(mask,
318 							    data ?
319 							    data->dma_filter :
320 							    NULL,
321 							    param_array ?
322 							    param_array[ch_num] :
323 							    NULL);
324 
325 			if (!ux500_channel->dma_chan) {
326 				ERR("Dma pipe allocation error dir=%d ch=%d\n",
327 					dir, ch_num);
328 
329 				/* Release already allocated channels */
330 				ux500_dma_controller_stop(controller);
331 
332 				return -EBUSY;
333 			}
334 
335 		}
336 
337 		/* Prepare the loop for TX channels */
338 		channel_array = controller->tx_channel;
339 		param_array = data ? data->dma_tx_param_array : NULL;
340 		chan_names = (char **)oep_chan_names;
341 		is_tx = 1;
342 	}
343 
344 	return 0;
345 }
346 
347 void ux500_dma_controller_destroy(struct dma_controller *c)
348 {
349 	struct ux500_dma_controller *controller = container_of(c,
350 			struct ux500_dma_controller, controller);
351 
352 	ux500_dma_controller_stop(controller);
353 	kfree(controller);
354 }
355 EXPORT_SYMBOL_GPL(ux500_dma_controller_destroy);
356 
357 struct dma_controller *
358 ux500_dma_controller_create(struct musb *musb, void __iomem *base)
359 {
360 	struct ux500_dma_controller *controller;
361 	struct platform_device *pdev = to_platform_device(musb->controller);
362 	struct resource	*iomem;
363 	int ret;
364 
365 	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
366 	if (!controller)
367 		goto kzalloc_fail;
368 
369 	controller->private_data = musb;
370 
371 	/* Save physical address for DMA controller. */
372 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
373 	if (!iomem) {
374 		dev_err(musb->controller, "no memory resource defined\n");
375 		goto plat_get_fail;
376 	}
377 
378 	controller->phy_base = (dma_addr_t) iomem->start;
379 
380 	controller->controller.channel_alloc = ux500_dma_channel_allocate;
381 	controller->controller.channel_release = ux500_dma_channel_release;
382 	controller->controller.channel_program = ux500_dma_channel_program;
383 	controller->controller.channel_abort = ux500_dma_channel_abort;
384 	controller->controller.is_compatible = ux500_dma_is_compatible;
385 
386 	ret = ux500_dma_controller_start(controller);
387 	if (ret)
388 		goto plat_get_fail;
389 	return &controller->controller;
390 
391 plat_get_fail:
392 	kfree(controller);
393 kzalloc_fail:
394 	return NULL;
395 }
396 EXPORT_SYMBOL_GPL(ux500_dma_controller_create);
397