1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Allwinner sun4i MUSB Glue Layer 4 * 5 * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> 6 * 7 * Based on code from 8 * Allwinner Technology Co., Ltd. <www.allwinnertech.com> 9 */ 10 11 #include <linux/clk.h> 12 #include <linux/err.h> 13 #include <linux/extcon.h> 14 #include <linux/io.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/of_device.h> 19 #include <linux/phy/phy-sun4i-usb.h> 20 #include <linux/platform_device.h> 21 #include <linux/reset.h> 22 #include <linux/soc/sunxi/sunxi_sram.h> 23 #include <linux/usb/musb.h> 24 #include <linux/usb/of.h> 25 #include <linux/usb/usb_phy_generic.h> 26 #include <linux/workqueue.h> 27 #include "musb_core.h" 28 29 /* 30 * Register offsets, note sunxi musb has a different layout then most 31 * musb implementations, we translate the layout in musb_readb & friends. 32 */ 33 #define SUNXI_MUSB_POWER 0x0040 34 #define SUNXI_MUSB_DEVCTL 0x0041 35 #define SUNXI_MUSB_INDEX 0x0042 36 #define SUNXI_MUSB_VEND0 0x0043 37 #define SUNXI_MUSB_INTRTX 0x0044 38 #define SUNXI_MUSB_INTRRX 0x0046 39 #define SUNXI_MUSB_INTRTXE 0x0048 40 #define SUNXI_MUSB_INTRRXE 0x004a 41 #define SUNXI_MUSB_INTRUSB 0x004c 42 #define SUNXI_MUSB_INTRUSBE 0x0050 43 #define SUNXI_MUSB_FRAME 0x0054 44 #define SUNXI_MUSB_TXFIFOSZ 0x0090 45 #define SUNXI_MUSB_TXFIFOADD 0x0092 46 #define SUNXI_MUSB_RXFIFOSZ 0x0094 47 #define SUNXI_MUSB_RXFIFOADD 0x0096 48 #define SUNXI_MUSB_FADDR 0x0098 49 #define SUNXI_MUSB_TXFUNCADDR 0x0098 50 #define SUNXI_MUSB_TXHUBADDR 0x009a 51 #define SUNXI_MUSB_TXHUBPORT 0x009b 52 #define SUNXI_MUSB_RXFUNCADDR 0x009c 53 #define SUNXI_MUSB_RXHUBADDR 0x009e 54 #define SUNXI_MUSB_RXHUBPORT 0x009f 55 #define SUNXI_MUSB_CONFIGDATA 0x00c0 56 57 /* VEND0 bits */ 58 #define SUNXI_MUSB_VEND0_PIO_MODE 0 59 60 /* flags */ 61 #define SUNXI_MUSB_FL_ENABLED 0 62 #define SUNXI_MUSB_FL_HOSTMODE 1 63 #define SUNXI_MUSB_FL_HOSTMODE_PEND 2 64 #define SUNXI_MUSB_FL_VBUS_ON 3 65 #define SUNXI_MUSB_FL_PHY_ON 4 66 #define SUNXI_MUSB_FL_HAS_SRAM 5 67 #define SUNXI_MUSB_FL_HAS_RESET 6 68 #define SUNXI_MUSB_FL_NO_CONFIGDATA 7 69 #define SUNXI_MUSB_FL_PHY_MODE_PEND 8 70 71 struct sunxi_musb_cfg { 72 const struct musb_hdrc_config *hdrc_config; 73 bool has_sram; 74 bool has_reset; 75 bool no_configdata; 76 }; 77 78 /* Our read/write methods need access and do not get passed in a musb ref :| */ 79 static struct musb *sunxi_musb; 80 81 struct sunxi_glue { 82 struct device *dev; 83 struct musb *musb; 84 struct platform_device *musb_pdev; 85 struct clk *clk; 86 struct reset_control *rst; 87 struct phy *phy; 88 struct platform_device *usb_phy; 89 struct usb_phy *xceiv; 90 enum phy_mode phy_mode; 91 unsigned long flags; 92 struct work_struct work; 93 struct extcon_dev *extcon; 94 struct notifier_block host_nb; 95 }; 96 97 /* phy_power_on / off may sleep, so we use a workqueue */ 98 static void sunxi_musb_work(struct work_struct *work) 99 { 100 struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); 101 bool vbus_on, phy_on; 102 103 if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) 104 return; 105 106 if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { 107 struct musb *musb = glue->musb; 108 unsigned long flags; 109 u8 devctl; 110 111 spin_lock_irqsave(&musb->lock, flags); 112 113 devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); 114 if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { 115 set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); 116 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 117 MUSB_HST_MODE(musb); 118 devctl |= MUSB_DEVCTL_SESSION; 119 } else { 120 clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); 121 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 122 MUSB_DEV_MODE(musb); 123 devctl &= ~MUSB_DEVCTL_SESSION; 124 } 125 writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); 126 127 spin_unlock_irqrestore(&musb->lock, flags); 128 } 129 130 vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); 131 phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); 132 133 if (phy_on != vbus_on) { 134 if (vbus_on) { 135 phy_power_on(glue->phy); 136 set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); 137 } else { 138 phy_power_off(glue->phy); 139 clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); 140 } 141 } 142 143 if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags)) 144 phy_set_mode(glue->phy, glue->phy_mode); 145 } 146 147 static void sunxi_musb_set_vbus(struct musb *musb, int is_on) 148 { 149 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 150 151 if (is_on) { 152 set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); 153 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 154 } else { 155 clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); 156 } 157 158 schedule_work(&glue->work); 159 } 160 161 static void sunxi_musb_pre_root_reset_end(struct musb *musb) 162 { 163 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 164 165 sun4i_usb_phy_set_squelch_detect(glue->phy, false); 166 } 167 168 static void sunxi_musb_post_root_reset_end(struct musb *musb) 169 { 170 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 171 172 sun4i_usb_phy_set_squelch_detect(glue->phy, true); 173 } 174 175 static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) 176 { 177 struct musb *musb = __hci; 178 unsigned long flags; 179 180 spin_lock_irqsave(&musb->lock, flags); 181 182 musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); 183 if (musb->int_usb) 184 writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); 185 186 if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { 187 /* ep0 FADDR must be 0 when (re)entering peripheral mode */ 188 musb_ep_select(musb->mregs, 0); 189 musb_writeb(musb->mregs, MUSB_FADDR, 0); 190 } 191 192 musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); 193 if (musb->int_tx) 194 writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); 195 196 musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); 197 if (musb->int_rx) 198 writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); 199 200 musb_interrupt(musb); 201 202 spin_unlock_irqrestore(&musb->lock, flags); 203 204 return IRQ_HANDLED; 205 } 206 207 static int sunxi_musb_host_notifier(struct notifier_block *nb, 208 unsigned long event, void *ptr) 209 { 210 struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); 211 212 if (event) 213 set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); 214 else 215 clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); 216 217 set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); 218 schedule_work(&glue->work); 219 220 return NOTIFY_DONE; 221 } 222 223 static int sunxi_musb_init(struct musb *musb) 224 { 225 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 226 int ret; 227 228 sunxi_musb = musb; 229 musb->phy = glue->phy; 230 musb->xceiv = glue->xceiv; 231 232 if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { 233 ret = sunxi_sram_claim(musb->controller->parent); 234 if (ret) 235 return ret; 236 } 237 238 ret = clk_prepare_enable(glue->clk); 239 if (ret) 240 goto error_sram_release; 241 242 if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { 243 ret = reset_control_deassert(glue->rst); 244 if (ret) 245 goto error_clk_disable; 246 } 247 248 writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); 249 250 /* Register notifier before calling phy_init() */ 251 ret = devm_extcon_register_notifier(glue->dev, glue->extcon, 252 EXTCON_USB_HOST, &glue->host_nb); 253 if (ret) 254 goto error_reset_assert; 255 256 ret = phy_init(glue->phy); 257 if (ret) 258 goto error_reset_assert; 259 260 musb->isr = sunxi_musb_interrupt; 261 262 /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ 263 pm_runtime_get(musb->controller); 264 265 return 0; 266 267 error_reset_assert: 268 if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) 269 reset_control_assert(glue->rst); 270 error_clk_disable: 271 clk_disable_unprepare(glue->clk); 272 error_sram_release: 273 if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) 274 sunxi_sram_release(musb->controller->parent); 275 return ret; 276 } 277 278 static int sunxi_musb_exit(struct musb *musb) 279 { 280 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 281 282 pm_runtime_put(musb->controller); 283 284 cancel_work_sync(&glue->work); 285 if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) 286 phy_power_off(glue->phy); 287 288 phy_exit(glue->phy); 289 290 if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) 291 reset_control_assert(glue->rst); 292 293 clk_disable_unprepare(glue->clk); 294 if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) 295 sunxi_sram_release(musb->controller->parent); 296 297 devm_usb_put_phy(glue->dev, glue->xceiv); 298 299 return 0; 300 } 301 302 static void sunxi_musb_enable(struct musb *musb) 303 { 304 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 305 306 glue->musb = musb; 307 308 /* musb_core does not call us in a balanced manner */ 309 if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) 310 return; 311 312 schedule_work(&glue->work); 313 } 314 315 static void sunxi_musb_disable(struct musb *musb) 316 { 317 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 318 319 clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); 320 } 321 322 static struct dma_controller * 323 sunxi_musb_dma_controller_create(struct musb *musb, void __iomem *base) 324 { 325 return NULL; 326 } 327 328 static void sunxi_musb_dma_controller_destroy(struct dma_controller *c) 329 { 330 } 331 332 static int sunxi_musb_set_mode(struct musb *musb, u8 mode) 333 { 334 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 335 enum phy_mode new_mode; 336 337 switch (mode) { 338 case MUSB_HOST: 339 new_mode = PHY_MODE_USB_HOST; 340 break; 341 case MUSB_PERIPHERAL: 342 new_mode = PHY_MODE_USB_DEVICE; 343 break; 344 case MUSB_OTG: 345 new_mode = PHY_MODE_USB_OTG; 346 break; 347 default: 348 dev_err(musb->controller->parent, 349 "Error requested mode not supported by this kernel\n"); 350 return -EINVAL; 351 } 352 353 if (glue->phy_mode == new_mode) 354 return 0; 355 356 if (musb->port_mode != MUSB_OTG) { 357 dev_err(musb->controller->parent, 358 "Error changing modes is only supported in dual role mode\n"); 359 return -EINVAL; 360 } 361 362 if (musb->port1_status & USB_PORT_STAT_ENABLE) 363 musb_root_disconnect(musb); 364 365 /* 366 * phy_set_mode may sleep, and we're called with a spinlock held, 367 * so let sunxi_musb_work deal with it. 368 */ 369 glue->phy_mode = new_mode; 370 set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); 371 schedule_work(&glue->work); 372 373 return 0; 374 } 375 376 static int sunxi_musb_recover(struct musb *musb) 377 { 378 struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); 379 380 /* 381 * Schedule a phy_set_mode with the current glue->phy_mode value, 382 * this will force end the current session. 383 */ 384 set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); 385 schedule_work(&glue->work); 386 387 return 0; 388 } 389 390 /* 391 * sunxi musb register layout 392 * 0x00 - 0x17 fifo regs, 1 long per fifo 393 * 0x40 - 0x57 generic control regs (power - frame) 394 * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) 395 * 0x90 - 0x97 fifo control regs (indexed) 396 * 0x98 - 0x9f multipoint / busctl regs (indexed) 397 * 0xc0 configdata reg 398 */ 399 400 static u32 sunxi_musb_fifo_offset(u8 epnum) 401 { 402 return (epnum * 4); 403 } 404 405 static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) 406 { 407 WARN_ONCE(offset != 0, 408 "sunxi_musb_ep_offset called with non 0 offset\n"); 409 410 return 0x80; /* indexed, so ignore epnum */ 411 } 412 413 static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) 414 { 415 return SUNXI_MUSB_TXFUNCADDR + offset; 416 } 417 418 static u8 sunxi_musb_readb(void __iomem *addr, u32 offset) 419 { 420 struct sunxi_glue *glue; 421 422 if (addr == sunxi_musb->mregs) { 423 /* generic control or fifo control reg access */ 424 switch (offset) { 425 case MUSB_FADDR: 426 return readb(addr + SUNXI_MUSB_FADDR); 427 case MUSB_POWER: 428 return readb(addr + SUNXI_MUSB_POWER); 429 case MUSB_INTRUSB: 430 return readb(addr + SUNXI_MUSB_INTRUSB); 431 case MUSB_INTRUSBE: 432 return readb(addr + SUNXI_MUSB_INTRUSBE); 433 case MUSB_INDEX: 434 return readb(addr + SUNXI_MUSB_INDEX); 435 case MUSB_TESTMODE: 436 return 0; /* No testmode on sunxi */ 437 case MUSB_DEVCTL: 438 return readb(addr + SUNXI_MUSB_DEVCTL); 439 case MUSB_TXFIFOSZ: 440 return readb(addr + SUNXI_MUSB_TXFIFOSZ); 441 case MUSB_RXFIFOSZ: 442 return readb(addr + SUNXI_MUSB_RXFIFOSZ); 443 case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ 444 glue = dev_get_drvdata(sunxi_musb->controller->parent); 445 /* A33 saves a reg, and we get to hardcode this */ 446 if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, 447 &glue->flags)) 448 return 0xde; 449 450 return readb(addr + SUNXI_MUSB_CONFIGDATA); 451 case MUSB_ULPI_BUSCONTROL: 452 dev_warn(sunxi_musb->controller->parent, 453 "sunxi-musb does not have ULPI bus control register\n"); 454 return 0; 455 /* Offset for these is fixed by sunxi_musb_busctl_offset() */ 456 case SUNXI_MUSB_TXFUNCADDR: 457 case SUNXI_MUSB_TXHUBADDR: 458 case SUNXI_MUSB_TXHUBPORT: 459 case SUNXI_MUSB_RXFUNCADDR: 460 case SUNXI_MUSB_RXHUBADDR: 461 case SUNXI_MUSB_RXHUBPORT: 462 /* multipoint / busctl reg access */ 463 return readb(addr + offset); 464 default: 465 dev_err(sunxi_musb->controller->parent, 466 "Error unknown readb offset %u\n", offset); 467 return 0; 468 } 469 } else if (addr == (sunxi_musb->mregs + 0x80)) { 470 /* ep control reg access */ 471 /* sunxi has a 2 byte hole before the txtype register */ 472 if (offset >= MUSB_TXTYPE) 473 offset += 2; 474 return readb(addr + offset); 475 } 476 477 dev_err(sunxi_musb->controller->parent, 478 "Error unknown readb at 0x%x bytes offset\n", 479 (int)(addr - sunxi_musb->mregs)); 480 return 0; 481 } 482 483 static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) 484 { 485 if (addr == sunxi_musb->mregs) { 486 /* generic control or fifo control reg access */ 487 switch (offset) { 488 case MUSB_FADDR: 489 return writeb(data, addr + SUNXI_MUSB_FADDR); 490 case MUSB_POWER: 491 return writeb(data, addr + SUNXI_MUSB_POWER); 492 case MUSB_INTRUSB: 493 return writeb(data, addr + SUNXI_MUSB_INTRUSB); 494 case MUSB_INTRUSBE: 495 return writeb(data, addr + SUNXI_MUSB_INTRUSBE); 496 case MUSB_INDEX: 497 return writeb(data, addr + SUNXI_MUSB_INDEX); 498 case MUSB_TESTMODE: 499 if (data) 500 dev_warn(sunxi_musb->controller->parent, 501 "sunxi-musb does not have testmode\n"); 502 return; 503 case MUSB_DEVCTL: 504 return writeb(data, addr + SUNXI_MUSB_DEVCTL); 505 case MUSB_TXFIFOSZ: 506 return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); 507 case MUSB_RXFIFOSZ: 508 return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); 509 case MUSB_ULPI_BUSCONTROL: 510 dev_warn(sunxi_musb->controller->parent, 511 "sunxi-musb does not have ULPI bus control register\n"); 512 return; 513 /* Offset for these is fixed by sunxi_musb_busctl_offset() */ 514 case SUNXI_MUSB_TXFUNCADDR: 515 case SUNXI_MUSB_TXHUBADDR: 516 case SUNXI_MUSB_TXHUBPORT: 517 case SUNXI_MUSB_RXFUNCADDR: 518 case SUNXI_MUSB_RXHUBADDR: 519 case SUNXI_MUSB_RXHUBPORT: 520 /* multipoint / busctl reg access */ 521 return writeb(data, addr + offset); 522 default: 523 dev_err(sunxi_musb->controller->parent, 524 "Error unknown writeb offset %u\n", offset); 525 return; 526 } 527 } else if (addr == (sunxi_musb->mregs + 0x80)) { 528 /* ep control reg access */ 529 if (offset >= MUSB_TXTYPE) 530 offset += 2; 531 return writeb(data, addr + offset); 532 } 533 534 dev_err(sunxi_musb->controller->parent, 535 "Error unknown writeb at 0x%x bytes offset\n", 536 (int)(addr - sunxi_musb->mregs)); 537 } 538 539 static u16 sunxi_musb_readw(void __iomem *addr, u32 offset) 540 { 541 if (addr == sunxi_musb->mregs) { 542 /* generic control or fifo control reg access */ 543 switch (offset) { 544 case MUSB_INTRTX: 545 return readw(addr + SUNXI_MUSB_INTRTX); 546 case MUSB_INTRRX: 547 return readw(addr + SUNXI_MUSB_INTRRX); 548 case MUSB_INTRTXE: 549 return readw(addr + SUNXI_MUSB_INTRTXE); 550 case MUSB_INTRRXE: 551 return readw(addr + SUNXI_MUSB_INTRRXE); 552 case MUSB_FRAME: 553 return readw(addr + SUNXI_MUSB_FRAME); 554 case MUSB_TXFIFOADD: 555 return readw(addr + SUNXI_MUSB_TXFIFOADD); 556 case MUSB_RXFIFOADD: 557 return readw(addr + SUNXI_MUSB_RXFIFOADD); 558 case MUSB_HWVERS: 559 return 0; /* sunxi musb version is not known */ 560 default: 561 dev_err(sunxi_musb->controller->parent, 562 "Error unknown readw offset %u\n", offset); 563 return 0; 564 } 565 } else if (addr == (sunxi_musb->mregs + 0x80)) { 566 /* ep control reg access */ 567 return readw(addr + offset); 568 } 569 570 dev_err(sunxi_musb->controller->parent, 571 "Error unknown readw at 0x%x bytes offset\n", 572 (int)(addr - sunxi_musb->mregs)); 573 return 0; 574 } 575 576 static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) 577 { 578 if (addr == sunxi_musb->mregs) { 579 /* generic control or fifo control reg access */ 580 switch (offset) { 581 case MUSB_INTRTX: 582 return writew(data, addr + SUNXI_MUSB_INTRTX); 583 case MUSB_INTRRX: 584 return writew(data, addr + SUNXI_MUSB_INTRRX); 585 case MUSB_INTRTXE: 586 return writew(data, addr + SUNXI_MUSB_INTRTXE); 587 case MUSB_INTRRXE: 588 return writew(data, addr + SUNXI_MUSB_INTRRXE); 589 case MUSB_FRAME: 590 return writew(data, addr + SUNXI_MUSB_FRAME); 591 case MUSB_TXFIFOADD: 592 return writew(data, addr + SUNXI_MUSB_TXFIFOADD); 593 case MUSB_RXFIFOADD: 594 return writew(data, addr + SUNXI_MUSB_RXFIFOADD); 595 default: 596 dev_err(sunxi_musb->controller->parent, 597 "Error unknown writew offset %u\n", offset); 598 return; 599 } 600 } else if (addr == (sunxi_musb->mregs + 0x80)) { 601 /* ep control reg access */ 602 return writew(data, addr + offset); 603 } 604 605 dev_err(sunxi_musb->controller->parent, 606 "Error unknown writew at 0x%x bytes offset\n", 607 (int)(addr - sunxi_musb->mregs)); 608 } 609 610 static const struct musb_platform_ops sunxi_musb_ops = { 611 .quirks = MUSB_INDEXED_EP, 612 .init = sunxi_musb_init, 613 .exit = sunxi_musb_exit, 614 .enable = sunxi_musb_enable, 615 .disable = sunxi_musb_disable, 616 .fifo_offset = sunxi_musb_fifo_offset, 617 .ep_offset = sunxi_musb_ep_offset, 618 .busctl_offset = sunxi_musb_busctl_offset, 619 .readb = sunxi_musb_readb, 620 .writeb = sunxi_musb_writeb, 621 .readw = sunxi_musb_readw, 622 .writew = sunxi_musb_writew, 623 .dma_init = sunxi_musb_dma_controller_create, 624 .dma_exit = sunxi_musb_dma_controller_destroy, 625 .set_mode = sunxi_musb_set_mode, 626 .recover = sunxi_musb_recover, 627 .set_vbus = sunxi_musb_set_vbus, 628 .pre_root_reset_end = sunxi_musb_pre_root_reset_end, 629 .post_root_reset_end = sunxi_musb_post_root_reset_end, 630 }; 631 632 #define SUNXI_MUSB_RAM_BITS 11 633 634 /* Allwinner OTG supports up to 5 endpoints */ 635 static struct musb_fifo_cfg sunxi_musb_mode_cfg_5eps[] = { 636 MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), 637 MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), 638 MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), 639 MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), 640 MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), 641 MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), 642 MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), 643 MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), 644 MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), 645 MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), 646 }; 647 648 /* H3/V3s OTG supports only 4 endpoints */ 649 static struct musb_fifo_cfg sunxi_musb_mode_cfg_4eps[] = { 650 MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), 651 MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), 652 MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), 653 MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), 654 MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), 655 MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), 656 MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), 657 MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), 658 }; 659 660 static const struct musb_hdrc_config sunxi_musb_hdrc_config_5eps = { 661 .fifo_cfg = sunxi_musb_mode_cfg_5eps, 662 .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_5eps), 663 .multipoint = true, 664 .dyn_fifo = true, 665 /* Two FIFOs per endpoint, plus ep_0. */ 666 .num_eps = (ARRAY_SIZE(sunxi_musb_mode_cfg_5eps) / 2) + 1, 667 .ram_bits = SUNXI_MUSB_RAM_BITS, 668 }; 669 670 static const struct musb_hdrc_config sunxi_musb_hdrc_config_4eps = { 671 .fifo_cfg = sunxi_musb_mode_cfg_4eps, 672 .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg_4eps), 673 .multipoint = true, 674 .dyn_fifo = true, 675 /* Two FIFOs per endpoint, plus ep_0. */ 676 .num_eps = (ARRAY_SIZE(sunxi_musb_mode_cfg_4eps) / 2) + 1, 677 .ram_bits = SUNXI_MUSB_RAM_BITS, 678 }; 679 680 static int sunxi_musb_probe(struct platform_device *pdev) 681 { 682 struct musb_hdrc_platform_data pdata; 683 struct platform_device_info pinfo; 684 struct sunxi_glue *glue; 685 struct device_node *np = pdev->dev.of_node; 686 const struct sunxi_musb_cfg *cfg; 687 int ret; 688 689 if (!np) { 690 dev_err(&pdev->dev, "Error no device tree node found\n"); 691 return -EINVAL; 692 } 693 694 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 695 if (!glue) 696 return -ENOMEM; 697 698 memset(&pdata, 0, sizeof(pdata)); 699 switch (usb_get_dr_mode(&pdev->dev)) { 700 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST 701 case USB_DR_MODE_HOST: 702 pdata.mode = MUSB_HOST; 703 glue->phy_mode = PHY_MODE_USB_HOST; 704 break; 705 #endif 706 #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET 707 case USB_DR_MODE_PERIPHERAL: 708 pdata.mode = MUSB_PERIPHERAL; 709 glue->phy_mode = PHY_MODE_USB_DEVICE; 710 break; 711 #endif 712 #ifdef CONFIG_USB_MUSB_DUAL_ROLE 713 case USB_DR_MODE_OTG: 714 pdata.mode = MUSB_OTG; 715 glue->phy_mode = PHY_MODE_USB_OTG; 716 break; 717 #endif 718 default: 719 dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); 720 return -EINVAL; 721 } 722 pdata.platform_ops = &sunxi_musb_ops; 723 724 cfg = of_device_get_match_data(&pdev->dev); 725 if (!cfg) 726 return -EINVAL; 727 728 pdata.config = cfg->hdrc_config; 729 730 glue->dev = &pdev->dev; 731 INIT_WORK(&glue->work, sunxi_musb_work); 732 glue->host_nb.notifier_call = sunxi_musb_host_notifier; 733 734 if (cfg->has_sram) 735 set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); 736 737 if (cfg->has_reset) 738 set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); 739 740 if (cfg->no_configdata) 741 set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags); 742 743 glue->clk = devm_clk_get(&pdev->dev, NULL); 744 if (IS_ERR(glue->clk)) { 745 dev_err(&pdev->dev, "Error getting clock: %ld\n", 746 PTR_ERR(glue->clk)); 747 return PTR_ERR(glue->clk); 748 } 749 750 if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { 751 glue->rst = devm_reset_control_get(&pdev->dev, NULL); 752 if (IS_ERR(glue->rst)) 753 return dev_err_probe(&pdev->dev, PTR_ERR(glue->rst), 754 "Error getting reset\n"); 755 } 756 757 glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); 758 if (IS_ERR(glue->extcon)) 759 return dev_err_probe(&pdev->dev, PTR_ERR(glue->extcon), 760 "Invalid or missing extcon\n"); 761 762 glue->phy = devm_phy_get(&pdev->dev, "usb"); 763 if (IS_ERR(glue->phy)) 764 return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy), 765 "Error getting phy\n"); 766 767 glue->usb_phy = usb_phy_generic_register(); 768 if (IS_ERR(glue->usb_phy)) { 769 dev_err(&pdev->dev, "Error registering usb-phy %ld\n", 770 PTR_ERR(glue->usb_phy)); 771 return PTR_ERR(glue->usb_phy); 772 } 773 774 glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); 775 if (IS_ERR(glue->xceiv)) { 776 ret = PTR_ERR(glue->xceiv); 777 dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); 778 goto err_unregister_usb_phy; 779 } 780 781 platform_set_drvdata(pdev, glue); 782 783 memset(&pinfo, 0, sizeof(pinfo)); 784 pinfo.name = "musb-hdrc"; 785 pinfo.id = PLATFORM_DEVID_AUTO; 786 pinfo.parent = &pdev->dev; 787 pinfo.fwnode = of_fwnode_handle(pdev->dev.of_node); 788 pinfo.of_node_reused = true; 789 pinfo.res = pdev->resource; 790 pinfo.num_res = pdev->num_resources; 791 pinfo.data = &pdata; 792 pinfo.size_data = sizeof(pdata); 793 794 glue->musb_pdev = platform_device_register_full(&pinfo); 795 if (IS_ERR(glue->musb_pdev)) { 796 ret = PTR_ERR(glue->musb_pdev); 797 dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); 798 goto err_unregister_usb_phy; 799 } 800 801 return 0; 802 803 err_unregister_usb_phy: 804 usb_phy_generic_unregister(glue->usb_phy); 805 return ret; 806 } 807 808 static int sunxi_musb_remove(struct platform_device *pdev) 809 { 810 struct sunxi_glue *glue = platform_get_drvdata(pdev); 811 struct platform_device *usb_phy = glue->usb_phy; 812 813 platform_device_unregister(glue->musb_pdev); 814 usb_phy_generic_unregister(usb_phy); 815 816 return 0; 817 } 818 819 static const struct sunxi_musb_cfg sun4i_a10_musb_cfg = { 820 .hdrc_config = &sunxi_musb_hdrc_config_5eps, 821 .has_sram = true, 822 }; 823 824 static const struct sunxi_musb_cfg sun6i_a31_musb_cfg = { 825 .hdrc_config = &sunxi_musb_hdrc_config_5eps, 826 .has_reset = true, 827 }; 828 829 static const struct sunxi_musb_cfg sun8i_a33_musb_cfg = { 830 .hdrc_config = &sunxi_musb_hdrc_config_5eps, 831 .has_reset = true, 832 .no_configdata = true, 833 }; 834 835 static const struct sunxi_musb_cfg sun8i_h3_musb_cfg = { 836 .hdrc_config = &sunxi_musb_hdrc_config_4eps, 837 .has_reset = true, 838 .no_configdata = true, 839 }; 840 841 static const struct sunxi_musb_cfg suniv_f1c100s_musb_cfg = { 842 .hdrc_config = &sunxi_musb_hdrc_config_5eps, 843 .has_sram = true, 844 .has_reset = true, 845 .no_configdata = true, 846 }; 847 848 static const struct of_device_id sunxi_musb_match[] = { 849 { .compatible = "allwinner,sun4i-a10-musb", 850 .data = &sun4i_a10_musb_cfg, }, 851 { .compatible = "allwinner,sun6i-a31-musb", 852 .data = &sun6i_a31_musb_cfg, }, 853 { .compatible = "allwinner,sun8i-a33-musb", 854 .data = &sun8i_a33_musb_cfg, }, 855 { .compatible = "allwinner,sun8i-h3-musb", 856 .data = &sun8i_h3_musb_cfg, }, 857 { .compatible = "allwinner,suniv-f1c100s-musb", 858 .data = &suniv_f1c100s_musb_cfg, }, 859 {} 860 }; 861 MODULE_DEVICE_TABLE(of, sunxi_musb_match); 862 863 static struct platform_driver sunxi_musb_driver = { 864 .probe = sunxi_musb_probe, 865 .remove = sunxi_musb_remove, 866 .driver = { 867 .name = "musb-sunxi", 868 .of_match_table = sunxi_musb_match, 869 }, 870 }; 871 module_platform_driver(sunxi_musb_driver); 872 873 MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); 874 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 875 MODULE_LICENSE("GPL v2"); 876