1 /* 2 * Copyright (C) 2005-2007 by Texas Instruments 3 * Some code has been taken from tusb6010.c 4 * Copyrights for that are attributable to: 5 * Copyright (C) 2006 Nokia Corporation 6 * Tony Lindgren <tony@atomide.com> 7 * 8 * This file is part of the Inventra Controller Driver for Linux. 9 * 10 * The Inventra Controller Driver for Linux is free software; you 11 * can redistribute it and/or modify it under the terms of the GNU 12 * General Public License version 2 as published by the Free Software 13 * Foundation. 14 * 15 * The Inventra Controller Driver for Linux is distributed in 16 * the hope that it will be useful, but WITHOUT ANY WARRANTY; 17 * without even the implied warranty of MERCHANTABILITY or 18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 19 * License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with The Inventra Controller Driver for Linux ; if not, 23 * write to the Free Software Foundation, Inc., 59 Temple Place, 24 * Suite 330, Boston, MA 02111-1307 USA 25 * 26 */ 27 #include <linux/module.h> 28 #include <linux/kernel.h> 29 #include <linux/sched.h> 30 #include <linux/init.h> 31 #include <linux/list.h> 32 #include <linux/io.h> 33 #include <linux/of.h> 34 #include <linux/platform_device.h> 35 #include <linux/dma-mapping.h> 36 #include <linux/pm_runtime.h> 37 #include <linux/err.h> 38 #include <linux/delay.h> 39 #include <linux/usb/musb.h> 40 #include <linux/phy/omap_control_phy.h> 41 #include <linux/of_platform.h> 42 43 #include "musb_core.h" 44 #include "omap2430.h" 45 46 struct omap2430_glue { 47 struct device *dev; 48 struct platform_device *musb; 49 enum musb_vbus_id_status status; 50 struct work_struct omap_musb_mailbox_work; 51 struct device *control_otghs; 52 }; 53 #define glue_to_musb(g) platform_get_drvdata(g->musb) 54 55 static struct omap2430_glue *_glue; 56 57 static void omap2430_musb_set_vbus(struct musb *musb, int is_on) 58 { 59 struct usb_otg *otg = musb->xceiv->otg; 60 u8 devctl; 61 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 62 /* HDRC controls CPEN, but beware current surges during device 63 * connect. They can trigger transient overcurrent conditions 64 * that must be ignored. 65 */ 66 67 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 68 69 if (is_on) { 70 if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) { 71 int loops = 100; 72 /* start the session */ 73 devctl |= MUSB_DEVCTL_SESSION; 74 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 75 /* 76 * Wait for the musb to set as A device to enable the 77 * VBUS 78 */ 79 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 80 MUSB_DEVCTL_BDEVICE) { 81 82 mdelay(5); 83 cpu_relax(); 84 85 if (time_after(jiffies, timeout) 86 || loops-- <= 0) { 87 dev_err(musb->controller, 88 "configured as A device timeout"); 89 break; 90 } 91 } 92 93 otg_set_vbus(otg, 1); 94 } else { 95 musb->is_active = 1; 96 otg->default_a = 1; 97 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 98 devctl |= MUSB_DEVCTL_SESSION; 99 MUSB_HST_MODE(musb); 100 } 101 } else { 102 musb->is_active = 0; 103 104 /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and 105 * jumping right to B_IDLE... 106 */ 107 108 otg->default_a = 0; 109 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 110 devctl &= ~MUSB_DEVCTL_SESSION; 111 112 MUSB_DEV_MODE(musb); 113 } 114 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 115 116 dev_dbg(musb->controller, "VBUS %s, devctl %02x " 117 /* otg %3x conf %08x prcm %08x */ "\n", 118 usb_otg_state_string(musb->xceiv->otg->state), 119 musb_readb(musb->mregs, MUSB_DEVCTL)); 120 } 121 122 static inline void omap2430_low_level_exit(struct musb *musb) 123 { 124 u32 l; 125 126 /* in any role */ 127 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 128 l |= ENABLEFORCE; /* enable MSTANDBY */ 129 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 130 } 131 132 static inline void omap2430_low_level_init(struct musb *musb) 133 { 134 u32 l; 135 136 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 137 l &= ~ENABLEFORCE; /* disable MSTANDBY */ 138 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 139 } 140 141 static int omap2430_musb_mailbox(enum musb_vbus_id_status status) 142 { 143 struct omap2430_glue *glue = _glue; 144 145 if (!glue) { 146 pr_err("%s: musb core is not yet initialized\n", __func__); 147 return -EPROBE_DEFER; 148 } 149 glue->status = status; 150 151 if (!glue_to_musb(glue)) { 152 pr_err("%s: musb core is not yet ready\n", __func__); 153 return -EPROBE_DEFER; 154 } 155 156 schedule_work(&glue->omap_musb_mailbox_work); 157 158 return 0; 159 } 160 161 static void omap_musb_set_mailbox(struct omap2430_glue *glue) 162 { 163 struct musb *musb = glue_to_musb(glue); 164 struct musb_hdrc_platform_data *pdata = 165 dev_get_platdata(musb->controller); 166 struct omap_musb_board_data *data = pdata->board_data; 167 struct usb_otg *otg = musb->xceiv->otg; 168 169 pm_runtime_get_sync(musb->controller); 170 switch (glue->status) { 171 case MUSB_ID_GROUND: 172 dev_dbg(musb->controller, "ID GND\n"); 173 174 otg->default_a = true; 175 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 176 musb->xceiv->last_event = USB_EVENT_ID; 177 if (musb->gadget_driver) { 178 omap_control_usb_set_mode(glue->control_otghs, 179 USB_MODE_HOST); 180 omap2430_musb_set_vbus(musb, 1); 181 } 182 break; 183 184 case MUSB_VBUS_VALID: 185 dev_dbg(musb->controller, "VBUS Connect\n"); 186 187 otg->default_a = false; 188 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 189 musb->xceiv->last_event = USB_EVENT_VBUS; 190 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); 191 break; 192 193 case MUSB_ID_FLOAT: 194 case MUSB_VBUS_OFF: 195 dev_dbg(musb->controller, "VBUS Disconnect\n"); 196 197 musb->xceiv->last_event = USB_EVENT_NONE; 198 if (musb->gadget_driver) 199 omap2430_musb_set_vbus(musb, 0); 200 201 if (data->interface_type == MUSB_INTERFACE_UTMI) 202 otg_set_vbus(musb->xceiv->otg, 0); 203 204 omap_control_usb_set_mode(glue->control_otghs, 205 USB_MODE_DISCONNECT); 206 break; 207 default: 208 dev_dbg(musb->controller, "ID float\n"); 209 } 210 pm_runtime_mark_last_busy(musb->controller); 211 pm_runtime_put_autosuspend(musb->controller); 212 atomic_notifier_call_chain(&musb->xceiv->notifier, 213 musb->xceiv->last_event, NULL); 214 } 215 216 217 static void omap_musb_mailbox_work(struct work_struct *mailbox_work) 218 { 219 struct omap2430_glue *glue = container_of(mailbox_work, 220 struct omap2430_glue, omap_musb_mailbox_work); 221 222 omap_musb_set_mailbox(glue); 223 } 224 225 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) 226 { 227 unsigned long flags; 228 irqreturn_t retval = IRQ_NONE; 229 struct musb *musb = __hci; 230 231 spin_lock_irqsave(&musb->lock, flags); 232 233 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); 234 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); 235 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); 236 237 if (musb->int_usb || musb->int_tx || musb->int_rx) 238 retval = musb_interrupt(musb); 239 240 spin_unlock_irqrestore(&musb->lock, flags); 241 242 return retval; 243 } 244 245 static int omap2430_musb_init(struct musb *musb) 246 { 247 u32 l; 248 int status = 0; 249 struct device *dev = musb->controller; 250 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 251 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); 252 struct omap_musb_board_data *data = plat->board_data; 253 254 /* We require some kind of external transceiver, hooked 255 * up through ULPI. TWL4030-family PMICs include one, 256 * which needs a driver, drivers aren't always needed. 257 */ 258 if (dev->parent->of_node) { 259 musb->phy = devm_phy_get(dev->parent, "usb2-phy"); 260 261 /* We can't totally remove musb->xceiv as of now because 262 * musb core uses xceiv.state and xceiv.otg. Once we have 263 * a separate state machine to handle otg, these can be moved 264 * out of xceiv and then we can start using the generic PHY 265 * framework 266 */ 267 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, 268 "usb-phy", 0); 269 } else { 270 musb->xceiv = devm_usb_get_phy_dev(dev, 0); 271 musb->phy = devm_phy_get(dev, "usb"); 272 } 273 274 if (IS_ERR(musb->xceiv)) { 275 status = PTR_ERR(musb->xceiv); 276 277 if (status == -ENXIO) 278 return status; 279 280 pr_err("HS USB OTG: no transceiver configured\n"); 281 return -EPROBE_DEFER; 282 } 283 284 if (IS_ERR(musb->phy)) { 285 pr_err("HS USB OTG: no PHY configured\n"); 286 return PTR_ERR(musb->phy); 287 } 288 musb->isr = omap2430_musb_interrupt; 289 phy_init(musb->phy); 290 291 l = musb_readl(musb->mregs, OTG_INTERFSEL); 292 293 if (data->interface_type == MUSB_INTERFACE_UTMI) { 294 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */ 295 l &= ~ULPI_12PIN; /* Disable ULPI */ 296 l |= UTMI_8BIT; /* Enable UTMI */ 297 } else { 298 l |= ULPI_12PIN; 299 } 300 301 musb_writel(musb->mregs, OTG_INTERFSEL, l); 302 303 pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " 304 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", 305 musb_readl(musb->mregs, OTG_REVISION), 306 musb_readl(musb->mregs, OTG_SYSCONFIG), 307 musb_readl(musb->mregs, OTG_SYSSTATUS), 308 musb_readl(musb->mregs, OTG_INTERFSEL), 309 musb_readl(musb->mregs, OTG_SIMENABLE)); 310 311 if (glue->status != MUSB_UNKNOWN) 312 omap_musb_set_mailbox(glue); 313 314 return 0; 315 } 316 317 static void omap2430_musb_enable(struct musb *musb) 318 { 319 u8 devctl; 320 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 321 struct device *dev = musb->controller; 322 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 323 struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); 324 struct omap_musb_board_data *data = pdata->board_data; 325 326 if (!WARN_ON(!musb->phy)) 327 phy_power_on(musb->phy); 328 329 switch (glue->status) { 330 331 case MUSB_ID_GROUND: 332 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); 333 if (data->interface_type != MUSB_INTERFACE_UTMI) 334 break; 335 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 336 /* start the session */ 337 devctl |= MUSB_DEVCTL_SESSION; 338 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 339 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 340 MUSB_DEVCTL_BDEVICE) { 341 cpu_relax(); 342 343 if (time_after(jiffies, timeout)) { 344 dev_err(dev, "configured as A device timeout"); 345 break; 346 } 347 } 348 break; 349 350 case MUSB_VBUS_VALID: 351 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); 352 break; 353 354 default: 355 break; 356 } 357 } 358 359 static void omap2430_musb_disable(struct musb *musb) 360 { 361 struct device *dev = musb->controller; 362 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 363 364 if (!WARN_ON(!musb->phy)) 365 phy_power_off(musb->phy); 366 367 if (glue->status != MUSB_UNKNOWN) 368 omap_control_usb_set_mode(glue->control_otghs, 369 USB_MODE_DISCONNECT); 370 } 371 372 static int omap2430_musb_exit(struct musb *musb) 373 { 374 struct device *dev = musb->controller; 375 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 376 377 omap2430_low_level_exit(musb); 378 phy_exit(musb->phy); 379 musb->phy = NULL; 380 cancel_work_sync(&glue->omap_musb_mailbox_work); 381 382 return 0; 383 } 384 385 static const struct musb_platform_ops omap2430_ops = { 386 .quirks = MUSB_DMA_INVENTRA, 387 #ifdef CONFIG_USB_INVENTRA_DMA 388 .dma_init = musbhs_dma_controller_create, 389 .dma_exit = musbhs_dma_controller_destroy, 390 #endif 391 .init = omap2430_musb_init, 392 .exit = omap2430_musb_exit, 393 394 .set_vbus = omap2430_musb_set_vbus, 395 396 .enable = omap2430_musb_enable, 397 .disable = omap2430_musb_disable, 398 399 .phy_callback = omap2430_musb_mailbox, 400 }; 401 402 static u64 omap2430_dmamask = DMA_BIT_MASK(32); 403 404 static int omap2430_probe(struct platform_device *pdev) 405 { 406 struct resource musb_resources[3]; 407 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); 408 struct omap_musb_board_data *data; 409 struct platform_device *musb; 410 struct omap2430_glue *glue; 411 struct device_node *np = pdev->dev.of_node; 412 struct musb_hdrc_config *config; 413 int ret = -ENOMEM, val; 414 415 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 416 if (!glue) 417 goto err0; 418 419 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); 420 if (!musb) { 421 dev_err(&pdev->dev, "failed to allocate musb device\n"); 422 goto err0; 423 } 424 425 musb->dev.parent = &pdev->dev; 426 musb->dev.dma_mask = &omap2430_dmamask; 427 musb->dev.coherent_dma_mask = omap2430_dmamask; 428 429 glue->dev = &pdev->dev; 430 glue->musb = musb; 431 glue->status = MUSB_UNKNOWN; 432 glue->control_otghs = ERR_PTR(-ENODEV); 433 434 if (np) { 435 struct device_node *control_node; 436 struct platform_device *control_pdev; 437 438 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 439 if (!pdata) 440 goto err2; 441 442 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); 443 if (!data) 444 goto err2; 445 446 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); 447 if (!config) 448 goto err2; 449 450 of_property_read_u32(np, "mode", (u32 *)&pdata->mode); 451 of_property_read_u32(np, "interface-type", 452 (u32 *)&data->interface_type); 453 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); 454 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); 455 of_property_read_u32(np, "power", (u32 *)&pdata->power); 456 457 ret = of_property_read_u32(np, "multipoint", &val); 458 if (!ret && val) 459 config->multipoint = true; 460 461 pdata->board_data = data; 462 pdata->config = config; 463 464 control_node = of_parse_phandle(np, "ctrl-module", 0); 465 if (control_node) { 466 control_pdev = of_find_device_by_node(control_node); 467 if (!control_pdev) { 468 dev_err(&pdev->dev, "Failed to get control device\n"); 469 ret = -EINVAL; 470 goto err2; 471 } 472 glue->control_otghs = &control_pdev->dev; 473 } 474 } 475 pdata->platform_ops = &omap2430_ops; 476 477 platform_set_drvdata(pdev, glue); 478 479 /* 480 * REVISIT if we ever have two instances of the wrapper, we will be 481 * in big trouble 482 */ 483 _glue = glue; 484 485 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); 486 487 memset(musb_resources, 0x00, sizeof(*musb_resources) * 488 ARRAY_SIZE(musb_resources)); 489 490 musb_resources[0].name = pdev->resource[0].name; 491 musb_resources[0].start = pdev->resource[0].start; 492 musb_resources[0].end = pdev->resource[0].end; 493 musb_resources[0].flags = pdev->resource[0].flags; 494 495 musb_resources[1].name = pdev->resource[1].name; 496 musb_resources[1].start = pdev->resource[1].start; 497 musb_resources[1].end = pdev->resource[1].end; 498 musb_resources[1].flags = pdev->resource[1].flags; 499 500 musb_resources[2].name = pdev->resource[2].name; 501 musb_resources[2].start = pdev->resource[2].start; 502 musb_resources[2].end = pdev->resource[2].end; 503 musb_resources[2].flags = pdev->resource[2].flags; 504 505 ret = platform_device_add_resources(musb, musb_resources, 506 ARRAY_SIZE(musb_resources)); 507 if (ret) { 508 dev_err(&pdev->dev, "failed to add resources\n"); 509 goto err2; 510 } 511 512 ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); 513 if (ret) { 514 dev_err(&pdev->dev, "failed to add platform_data\n"); 515 goto err2; 516 } 517 518 pm_runtime_enable(glue->dev); 519 pm_runtime_use_autosuspend(glue->dev); 520 pm_runtime_set_autosuspend_delay(glue->dev, 100); 521 522 ret = platform_device_add(musb); 523 if (ret) { 524 dev_err(&pdev->dev, "failed to register musb device\n"); 525 goto err2; 526 } 527 528 return 0; 529 530 err2: 531 platform_device_put(musb); 532 533 err0: 534 return ret; 535 } 536 537 static int omap2430_remove(struct platform_device *pdev) 538 { 539 struct omap2430_glue *glue = platform_get_drvdata(pdev); 540 541 pm_runtime_get_sync(glue->dev); 542 platform_device_unregister(glue->musb); 543 pm_runtime_put_sync(glue->dev); 544 pm_runtime_dont_use_autosuspend(glue->dev); 545 pm_runtime_disable(glue->dev); 546 547 return 0; 548 } 549 550 #ifdef CONFIG_PM 551 552 static int omap2430_runtime_suspend(struct device *dev) 553 { 554 struct omap2430_glue *glue = dev_get_drvdata(dev); 555 struct musb *musb = glue_to_musb(glue); 556 557 if (!musb) 558 return 0; 559 560 musb->context.otg_interfsel = musb_readl(musb->mregs, 561 OTG_INTERFSEL); 562 563 omap2430_low_level_exit(musb); 564 565 return 0; 566 } 567 568 static int omap2430_runtime_resume(struct device *dev) 569 { 570 struct omap2430_glue *glue = dev_get_drvdata(dev); 571 struct musb *musb = glue_to_musb(glue); 572 573 if (!musb) 574 return 0; 575 576 omap2430_low_level_init(musb); 577 musb_writel(musb->mregs, OTG_INTERFSEL, 578 musb->context.otg_interfsel); 579 580 return 0; 581 } 582 583 static struct dev_pm_ops omap2430_pm_ops = { 584 .runtime_suspend = omap2430_runtime_suspend, 585 .runtime_resume = omap2430_runtime_resume, 586 }; 587 588 #define DEV_PM_OPS (&omap2430_pm_ops) 589 #else 590 #define DEV_PM_OPS NULL 591 #endif 592 593 #ifdef CONFIG_OF 594 static const struct of_device_id omap2430_id_table[] = { 595 { 596 .compatible = "ti,omap4-musb" 597 }, 598 { 599 .compatible = "ti,omap3-musb" 600 }, 601 {}, 602 }; 603 MODULE_DEVICE_TABLE(of, omap2430_id_table); 604 #endif 605 606 static struct platform_driver omap2430_driver = { 607 .probe = omap2430_probe, 608 .remove = omap2430_remove, 609 .driver = { 610 .name = "musb-omap2430", 611 .pm = DEV_PM_OPS, 612 .of_match_table = of_match_ptr(omap2430_id_table), 613 }, 614 }; 615 616 module_platform_driver(omap2430_driver); 617 618 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); 619 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 620 MODULE_LICENSE("GPL v2"); 621