1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2005-2007 by Texas Instruments 4 * Some code has been taken from tusb6010.c 5 * Copyrights for that are attributable to: 6 * Copyright (C) 2006 Nokia Corporation 7 * Tony Lindgren <tony@atomide.com> 8 * 9 * This file is part of the Inventra Controller Driver for Linux. 10 */ 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 #include <linux/sched.h> 14 #include <linux/init.h> 15 #include <linux/list.h> 16 #include <linux/io.h> 17 #include <linux/of.h> 18 #include <linux/platform_device.h> 19 #include <linux/dma-mapping.h> 20 #include <linux/pm_runtime.h> 21 #include <linux/err.h> 22 #include <linux/delay.h> 23 #include <linux/usb/musb.h> 24 #include <linux/phy/omap_control_phy.h> 25 #include <linux/of_platform.h> 26 27 #include "musb_core.h" 28 #include "omap2430.h" 29 30 struct omap2430_glue { 31 struct device *dev; 32 struct platform_device *musb; 33 enum musb_vbus_id_status status; 34 struct work_struct omap_musb_mailbox_work; 35 struct device *control_otghs; 36 }; 37 #define glue_to_musb(g) platform_get_drvdata(g->musb) 38 39 static struct omap2430_glue *_glue; 40 41 static inline void omap2430_low_level_exit(struct musb *musb) 42 { 43 u32 l; 44 45 /* in any role */ 46 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 47 l |= ENABLEFORCE; /* enable MSTANDBY */ 48 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 49 } 50 51 static inline void omap2430_low_level_init(struct musb *musb) 52 { 53 u32 l; 54 55 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 56 l &= ~ENABLEFORCE; /* disable MSTANDBY */ 57 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 58 } 59 60 static int omap2430_musb_mailbox(enum musb_vbus_id_status status) 61 { 62 struct omap2430_glue *glue = _glue; 63 64 if (!glue) { 65 pr_err("%s: musb core is not yet initialized\n", __func__); 66 return -EPROBE_DEFER; 67 } 68 glue->status = status; 69 70 if (!glue_to_musb(glue)) { 71 pr_err("%s: musb core is not yet ready\n", __func__); 72 return -EPROBE_DEFER; 73 } 74 75 schedule_work(&glue->omap_musb_mailbox_work); 76 77 return 0; 78 } 79 80 /* 81 * HDRC controls CPEN, but beware current surges during device connect. 82 * They can trigger transient overcurrent conditions that must be ignored. 83 * 84 * Note that we're skipping A_WAIT_VFALL -> A_IDLE and jumping right to B_IDLE 85 * as set by musb_set_peripheral(). 86 */ 87 static void omap_musb_set_mailbox(struct omap2430_glue *glue) 88 { 89 struct musb *musb = glue_to_musb(glue); 90 int error; 91 92 pm_runtime_get_sync(musb->controller); 93 94 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", 95 usb_otg_state_string(musb->xceiv->otg->state), 96 musb_readb(musb->mregs, MUSB_DEVCTL)); 97 98 switch (glue->status) { 99 case MUSB_ID_GROUND: 100 dev_dbg(musb->controller, "ID GND\n"); 101 switch (musb->xceiv->otg->state) { 102 case OTG_STATE_A_IDLE: 103 error = musb_set_host(musb); 104 if (error) 105 break; 106 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 107 /* Fall through */ 108 case OTG_STATE_A_WAIT_VRISE: 109 case OTG_STATE_A_WAIT_BCON: 110 case OTG_STATE_A_HOST: 111 /* 112 * On multiple ID ground interrupts just keep enabling 113 * VBUS. At least cpcap VBUS shuts down otherwise. 114 */ 115 otg_set_vbus(musb->xceiv->otg, 1); 116 break; 117 default: 118 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 119 musb->xceiv->last_event = USB_EVENT_ID; 120 if (musb->gadget_driver) { 121 omap_control_usb_set_mode(glue->control_otghs, 122 USB_MODE_HOST); 123 otg_set_vbus(musb->xceiv->otg, 1); 124 } 125 break; 126 } 127 break; 128 129 case MUSB_VBUS_VALID: 130 dev_dbg(musb->controller, "VBUS Connect\n"); 131 132 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 133 musb->xceiv->last_event = USB_EVENT_VBUS; 134 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); 135 break; 136 137 case MUSB_ID_FLOAT: 138 case MUSB_VBUS_OFF: 139 dev_dbg(musb->controller, "VBUS Disconnect\n"); 140 141 musb->xceiv->last_event = USB_EVENT_NONE; 142 musb_set_peripheral(musb); 143 otg_set_vbus(musb->xceiv->otg, 0); 144 omap_control_usb_set_mode(glue->control_otghs, 145 USB_MODE_DISCONNECT); 146 break; 147 default: 148 dev_dbg(musb->controller, "ID float\n"); 149 } 150 pm_runtime_mark_last_busy(musb->controller); 151 pm_runtime_put_autosuspend(musb->controller); 152 atomic_notifier_call_chain(&musb->xceiv->notifier, 153 musb->xceiv->last_event, NULL); 154 } 155 156 157 static void omap_musb_mailbox_work(struct work_struct *mailbox_work) 158 { 159 struct omap2430_glue *glue = container_of(mailbox_work, 160 struct omap2430_glue, omap_musb_mailbox_work); 161 162 omap_musb_set_mailbox(glue); 163 } 164 165 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) 166 { 167 unsigned long flags; 168 irqreturn_t retval = IRQ_NONE; 169 struct musb *musb = __hci; 170 171 spin_lock_irqsave(&musb->lock, flags); 172 173 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); 174 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); 175 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); 176 177 if (musb->int_usb || musb->int_tx || musb->int_rx) 178 retval = musb_interrupt(musb); 179 180 spin_unlock_irqrestore(&musb->lock, flags); 181 182 return retval; 183 } 184 185 static int omap2430_musb_init(struct musb *musb) 186 { 187 u32 l; 188 int status = 0; 189 struct device *dev = musb->controller; 190 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); 191 struct omap_musb_board_data *data = plat->board_data; 192 193 /* We require some kind of external transceiver, hooked 194 * up through ULPI. TWL4030-family PMICs include one, 195 * which needs a driver, drivers aren't always needed. 196 */ 197 musb->phy = devm_phy_get(dev->parent, "usb2-phy"); 198 199 /* We can't totally remove musb->xceiv as of now because 200 * musb core uses xceiv.state and xceiv.otg. Once we have 201 * a separate state machine to handle otg, these can be moved 202 * out of xceiv and then we can start using the generic PHY 203 * framework 204 */ 205 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "usb-phy", 0); 206 207 if (IS_ERR(musb->xceiv)) { 208 status = PTR_ERR(musb->xceiv); 209 210 if (status == -ENXIO) 211 return status; 212 213 dev_dbg(dev, "HS USB OTG: no transceiver configured\n"); 214 return -EPROBE_DEFER; 215 } 216 217 if (IS_ERR(musb->phy)) { 218 dev_err(dev, "HS USB OTG: no PHY configured\n"); 219 return PTR_ERR(musb->phy); 220 } 221 musb->isr = omap2430_musb_interrupt; 222 phy_init(musb->phy); 223 phy_power_on(musb->phy); 224 225 l = musb_readl(musb->mregs, OTG_INTERFSEL); 226 227 if (data->interface_type == MUSB_INTERFACE_UTMI) { 228 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */ 229 l &= ~ULPI_12PIN; /* Disable ULPI */ 230 l |= UTMI_8BIT; /* Enable UTMI */ 231 } else { 232 l |= ULPI_12PIN; 233 } 234 235 musb_writel(musb->mregs, OTG_INTERFSEL, l); 236 237 dev_dbg(dev, "HS USB OTG: revision 0x%x, sysconfig 0x%02x, " 238 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", 239 musb_readl(musb->mregs, OTG_REVISION), 240 musb_readl(musb->mregs, OTG_SYSCONFIG), 241 musb_readl(musb->mregs, OTG_SYSSTATUS), 242 musb_readl(musb->mregs, OTG_INTERFSEL), 243 musb_readl(musb->mregs, OTG_SIMENABLE)); 244 245 return 0; 246 } 247 248 static void omap2430_musb_enable(struct musb *musb) 249 { 250 struct device *dev = musb->controller; 251 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 252 253 if (glue->status == MUSB_UNKNOWN) 254 glue->status = MUSB_VBUS_OFF; 255 omap_musb_set_mailbox(glue); 256 } 257 258 static void omap2430_musb_disable(struct musb *musb) 259 { 260 struct device *dev = musb->controller; 261 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 262 263 if (glue->status != MUSB_UNKNOWN) 264 omap_control_usb_set_mode(glue->control_otghs, 265 USB_MODE_DISCONNECT); 266 } 267 268 static int omap2430_musb_exit(struct musb *musb) 269 { 270 struct device *dev = musb->controller; 271 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 272 273 omap2430_low_level_exit(musb); 274 phy_power_off(musb->phy); 275 phy_exit(musb->phy); 276 musb->phy = NULL; 277 cancel_work_sync(&glue->omap_musb_mailbox_work); 278 279 return 0; 280 } 281 282 static const struct musb_platform_ops omap2430_ops = { 283 .quirks = MUSB_DMA_INVENTRA, 284 #ifdef CONFIG_USB_INVENTRA_DMA 285 .dma_init = musbhs_dma_controller_create, 286 .dma_exit = musbhs_dma_controller_destroy, 287 #endif 288 .init = omap2430_musb_init, 289 .exit = omap2430_musb_exit, 290 291 .enable = omap2430_musb_enable, 292 .disable = omap2430_musb_disable, 293 294 .phy_callback = omap2430_musb_mailbox, 295 }; 296 297 static u64 omap2430_dmamask = DMA_BIT_MASK(32); 298 299 static int omap2430_probe(struct platform_device *pdev) 300 { 301 struct resource musb_resources[3]; 302 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); 303 struct omap_musb_board_data *data; 304 struct platform_device *musb; 305 struct omap2430_glue *glue; 306 struct device_node *np = pdev->dev.of_node; 307 struct musb_hdrc_config *config; 308 struct device_node *control_node; 309 struct platform_device *control_pdev; 310 int ret = -ENOMEM, val; 311 312 if (!np) 313 return -ENODEV; 314 315 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 316 if (!glue) 317 goto err0; 318 319 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); 320 if (!musb) { 321 dev_err(&pdev->dev, "failed to allocate musb device\n"); 322 goto err0; 323 } 324 325 musb->dev.parent = &pdev->dev; 326 musb->dev.dma_mask = &omap2430_dmamask; 327 musb->dev.coherent_dma_mask = omap2430_dmamask; 328 329 glue->dev = &pdev->dev; 330 glue->musb = musb; 331 glue->status = MUSB_UNKNOWN; 332 glue->control_otghs = ERR_PTR(-ENODEV); 333 334 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 335 if (!pdata) 336 goto err2; 337 338 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); 339 if (!data) 340 goto err2; 341 342 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); 343 if (!config) 344 goto err2; 345 346 of_property_read_u32(np, "mode", (u32 *)&pdata->mode); 347 of_property_read_u32(np, "interface-type", 348 (u32 *)&data->interface_type); 349 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); 350 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); 351 of_property_read_u32(np, "power", (u32 *)&pdata->power); 352 353 ret = of_property_read_u32(np, "multipoint", &val); 354 if (!ret && val) 355 config->multipoint = true; 356 357 pdata->board_data = data; 358 pdata->config = config; 359 360 control_node = of_parse_phandle(np, "ctrl-module", 0); 361 if (control_node) { 362 control_pdev = of_find_device_by_node(control_node); 363 if (!control_pdev) { 364 dev_err(&pdev->dev, "Failed to get control device\n"); 365 ret = -EINVAL; 366 goto err2; 367 } 368 glue->control_otghs = &control_pdev->dev; 369 } 370 371 pdata->platform_ops = &omap2430_ops; 372 373 platform_set_drvdata(pdev, glue); 374 375 /* 376 * REVISIT if we ever have two instances of the wrapper, we will be 377 * in big trouble 378 */ 379 _glue = glue; 380 381 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); 382 383 memset(musb_resources, 0x00, sizeof(*musb_resources) * 384 ARRAY_SIZE(musb_resources)); 385 386 musb_resources[0].name = pdev->resource[0].name; 387 musb_resources[0].start = pdev->resource[0].start; 388 musb_resources[0].end = pdev->resource[0].end; 389 musb_resources[0].flags = pdev->resource[0].flags; 390 391 musb_resources[1].name = pdev->resource[1].name; 392 musb_resources[1].start = pdev->resource[1].start; 393 musb_resources[1].end = pdev->resource[1].end; 394 musb_resources[1].flags = pdev->resource[1].flags; 395 396 musb_resources[2].name = pdev->resource[2].name; 397 musb_resources[2].start = pdev->resource[2].start; 398 musb_resources[2].end = pdev->resource[2].end; 399 musb_resources[2].flags = pdev->resource[2].flags; 400 401 ret = platform_device_add_resources(musb, musb_resources, 402 ARRAY_SIZE(musb_resources)); 403 if (ret) { 404 dev_err(&pdev->dev, "failed to add resources\n"); 405 goto err2; 406 } 407 408 ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); 409 if (ret) { 410 dev_err(&pdev->dev, "failed to add platform_data\n"); 411 goto err2; 412 } 413 414 pm_runtime_enable(glue->dev); 415 416 ret = platform_device_add(musb); 417 if (ret) { 418 dev_err(&pdev->dev, "failed to register musb device\n"); 419 goto err3; 420 } 421 422 return 0; 423 424 err3: 425 pm_runtime_disable(glue->dev); 426 427 err2: 428 platform_device_put(musb); 429 430 err0: 431 return ret; 432 } 433 434 static int omap2430_remove(struct platform_device *pdev) 435 { 436 struct omap2430_glue *glue = platform_get_drvdata(pdev); 437 438 platform_device_unregister(glue->musb); 439 pm_runtime_disable(glue->dev); 440 441 return 0; 442 } 443 444 #ifdef CONFIG_PM 445 446 static int omap2430_runtime_suspend(struct device *dev) 447 { 448 struct omap2430_glue *glue = dev_get_drvdata(dev); 449 struct musb *musb = glue_to_musb(glue); 450 451 if (!musb) 452 return 0; 453 454 musb->context.otg_interfsel = musb_readl(musb->mregs, 455 OTG_INTERFSEL); 456 457 omap2430_low_level_exit(musb); 458 459 phy_power_off(musb->phy); 460 phy_exit(musb->phy); 461 462 return 0; 463 } 464 465 static int omap2430_runtime_resume(struct device *dev) 466 { 467 struct omap2430_glue *glue = dev_get_drvdata(dev); 468 struct musb *musb = glue_to_musb(glue); 469 470 if (!musb) 471 return 0; 472 473 phy_init(musb->phy); 474 phy_power_on(musb->phy); 475 476 omap2430_low_level_init(musb); 477 musb_writel(musb->mregs, OTG_INTERFSEL, 478 musb->context.otg_interfsel); 479 480 /* Wait for musb to get oriented. Otherwise we can get babble */ 481 usleep_range(200000, 250000); 482 483 return 0; 484 } 485 486 static const struct dev_pm_ops omap2430_pm_ops = { 487 .runtime_suspend = omap2430_runtime_suspend, 488 .runtime_resume = omap2430_runtime_resume, 489 }; 490 491 #define DEV_PM_OPS (&omap2430_pm_ops) 492 #else 493 #define DEV_PM_OPS NULL 494 #endif 495 496 #ifdef CONFIG_OF 497 static const struct of_device_id omap2430_id_table[] = { 498 { 499 .compatible = "ti,omap4-musb" 500 }, 501 { 502 .compatible = "ti,omap3-musb" 503 }, 504 {}, 505 }; 506 MODULE_DEVICE_TABLE(of, omap2430_id_table); 507 #endif 508 509 static struct platform_driver omap2430_driver = { 510 .probe = omap2430_probe, 511 .remove = omap2430_remove, 512 .driver = { 513 .name = "musb-omap2430", 514 .pm = DEV_PM_OPS, 515 .of_match_table = of_match_ptr(omap2430_id_table), 516 }, 517 }; 518 519 module_platform_driver(omap2430_driver); 520 521 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); 522 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 523 MODULE_LICENSE("GPL v2"); 524