1 /* 2 * Copyright (C) 2005-2007 by Texas Instruments 3 * Some code has been taken from tusb6010.c 4 * Copyrights for that are attributable to: 5 * Copyright (C) 2006 Nokia Corporation 6 * Tony Lindgren <tony@atomide.com> 7 * 8 * This file is part of the Inventra Controller Driver for Linux. 9 * 10 * The Inventra Controller Driver for Linux is free software; you 11 * can redistribute it and/or modify it under the terms of the GNU 12 * General Public License version 2 as published by the Free Software 13 * Foundation. 14 * 15 * The Inventra Controller Driver for Linux is distributed in 16 * the hope that it will be useful, but WITHOUT ANY WARRANTY; 17 * without even the implied warranty of MERCHANTABILITY or 18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 19 * License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with The Inventra Controller Driver for Linux ; if not, 23 * write to the Free Software Foundation, Inc., 59 Temple Place, 24 * Suite 330, Boston, MA 02111-1307 USA 25 * 26 */ 27 #include <linux/module.h> 28 #include <linux/kernel.h> 29 #include <linux/sched.h> 30 #include <linux/init.h> 31 #include <linux/list.h> 32 #include <linux/io.h> 33 #include <linux/of.h> 34 #include <linux/platform_device.h> 35 #include <linux/dma-mapping.h> 36 #include <linux/pm_runtime.h> 37 #include <linux/err.h> 38 #include <linux/delay.h> 39 #include <linux/usb/musb-omap.h> 40 #include <linux/usb/omap_control_usb.h> 41 #include <linux/of_platform.h> 42 43 #include "musb_core.h" 44 #include "omap2430.h" 45 46 struct omap2430_glue { 47 struct device *dev; 48 struct platform_device *musb; 49 enum omap_musb_vbus_id_status status; 50 struct work_struct omap_musb_mailbox_work; 51 struct device *control_otghs; 52 }; 53 #define glue_to_musb(g) platform_get_drvdata(g->musb) 54 55 static struct omap2430_glue *_glue; 56 57 static struct timer_list musb_idle_timer; 58 59 static void musb_do_idle(unsigned long _musb) 60 { 61 struct musb *musb = (void *)_musb; 62 unsigned long flags; 63 u8 power; 64 u8 devctl; 65 66 spin_lock_irqsave(&musb->lock, flags); 67 68 switch (musb->xceiv->state) { 69 case OTG_STATE_A_WAIT_BCON: 70 71 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 72 if (devctl & MUSB_DEVCTL_BDEVICE) { 73 musb->xceiv->state = OTG_STATE_B_IDLE; 74 MUSB_DEV_MODE(musb); 75 } else { 76 musb->xceiv->state = OTG_STATE_A_IDLE; 77 MUSB_HST_MODE(musb); 78 } 79 break; 80 case OTG_STATE_A_SUSPEND: 81 /* finish RESUME signaling? */ 82 if (musb->port1_status & MUSB_PORT_STAT_RESUME) { 83 power = musb_readb(musb->mregs, MUSB_POWER); 84 power &= ~MUSB_POWER_RESUME; 85 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power); 86 musb_writeb(musb->mregs, MUSB_POWER, power); 87 musb->is_active = 1; 88 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND 89 | MUSB_PORT_STAT_RESUME); 90 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 91 usb_hcd_poll_rh_status(musb->hcd); 92 /* NOTE: it might really be A_WAIT_BCON ... */ 93 musb->xceiv->state = OTG_STATE_A_HOST; 94 } 95 break; 96 case OTG_STATE_A_HOST: 97 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 98 if (devctl & MUSB_DEVCTL_BDEVICE) 99 musb->xceiv->state = OTG_STATE_B_IDLE; 100 else 101 musb->xceiv->state = OTG_STATE_A_WAIT_BCON; 102 default: 103 break; 104 } 105 spin_unlock_irqrestore(&musb->lock, flags); 106 } 107 108 109 static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) 110 { 111 unsigned long default_timeout = jiffies + msecs_to_jiffies(3); 112 static unsigned long last_timer; 113 114 if (timeout == 0) 115 timeout = default_timeout; 116 117 /* Never idle if active, or when VBUS timeout is not set as host */ 118 if (musb->is_active || ((musb->a_wait_bcon == 0) 119 && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { 120 dev_dbg(musb->controller, "%s active, deleting timer\n", 121 usb_otg_state_string(musb->xceiv->state)); 122 del_timer(&musb_idle_timer); 123 last_timer = jiffies; 124 return; 125 } 126 127 if (time_after(last_timer, timeout)) { 128 if (!timer_pending(&musb_idle_timer)) 129 last_timer = timeout; 130 else { 131 dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n"); 132 return; 133 } 134 } 135 last_timer = timeout; 136 137 dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", 138 usb_otg_state_string(musb->xceiv->state), 139 (unsigned long)jiffies_to_msecs(timeout - jiffies)); 140 mod_timer(&musb_idle_timer, timeout); 141 } 142 143 static void omap2430_musb_set_vbus(struct musb *musb, int is_on) 144 { 145 struct usb_otg *otg = musb->xceiv->otg; 146 u8 devctl; 147 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 148 /* HDRC controls CPEN, but beware current surges during device 149 * connect. They can trigger transient overcurrent conditions 150 * that must be ignored. 151 */ 152 153 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 154 155 if (is_on) { 156 if (musb->xceiv->state == OTG_STATE_A_IDLE) { 157 int loops = 100; 158 /* start the session */ 159 devctl |= MUSB_DEVCTL_SESSION; 160 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 161 /* 162 * Wait for the musb to set as A device to enable the 163 * VBUS 164 */ 165 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) { 166 167 mdelay(5); 168 cpu_relax(); 169 170 if (time_after(jiffies, timeout) 171 || loops-- <= 0) { 172 dev_err(musb->controller, 173 "configured as A device timeout"); 174 break; 175 } 176 } 177 178 otg_set_vbus(otg, 1); 179 } else { 180 musb->is_active = 1; 181 otg->default_a = 1; 182 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; 183 devctl |= MUSB_DEVCTL_SESSION; 184 MUSB_HST_MODE(musb); 185 } 186 } else { 187 musb->is_active = 0; 188 189 /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and 190 * jumping right to B_IDLE... 191 */ 192 193 otg->default_a = 0; 194 musb->xceiv->state = OTG_STATE_B_IDLE; 195 devctl &= ~MUSB_DEVCTL_SESSION; 196 197 MUSB_DEV_MODE(musb); 198 } 199 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 200 201 dev_dbg(musb->controller, "VBUS %s, devctl %02x " 202 /* otg %3x conf %08x prcm %08x */ "\n", 203 usb_otg_state_string(musb->xceiv->state), 204 musb_readb(musb->mregs, MUSB_DEVCTL)); 205 } 206 207 static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode) 208 { 209 u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 210 211 devctl |= MUSB_DEVCTL_SESSION; 212 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 213 214 return 0; 215 } 216 217 static inline void omap2430_low_level_exit(struct musb *musb) 218 { 219 u32 l; 220 221 /* in any role */ 222 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 223 l |= ENABLEFORCE; /* enable MSTANDBY */ 224 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 225 } 226 227 static inline void omap2430_low_level_init(struct musb *musb) 228 { 229 u32 l; 230 231 l = musb_readl(musb->mregs, OTG_FORCESTDBY); 232 l &= ~ENABLEFORCE; /* disable MSTANDBY */ 233 musb_writel(musb->mregs, OTG_FORCESTDBY, l); 234 } 235 236 void omap_musb_mailbox(enum omap_musb_vbus_id_status status) 237 { 238 struct omap2430_glue *glue = _glue; 239 240 if (!glue) { 241 pr_err("%s: musb core is not yet initialized\n", __func__); 242 return; 243 } 244 glue->status = status; 245 246 if (!glue_to_musb(glue)) { 247 pr_err("%s: musb core is not yet ready\n", __func__); 248 return; 249 } 250 251 schedule_work(&glue->omap_musb_mailbox_work); 252 } 253 EXPORT_SYMBOL_GPL(omap_musb_mailbox); 254 255 static void omap_musb_set_mailbox(struct omap2430_glue *glue) 256 { 257 struct musb *musb = glue_to_musb(glue); 258 struct device *dev = musb->controller; 259 struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); 260 struct omap_musb_board_data *data = pdata->board_data; 261 struct usb_otg *otg = musb->xceiv->otg; 262 263 switch (glue->status) { 264 case OMAP_MUSB_ID_GROUND: 265 dev_dbg(dev, "ID GND\n"); 266 267 otg->default_a = true; 268 musb->xceiv->state = OTG_STATE_A_IDLE; 269 musb->xceiv->last_event = USB_EVENT_ID; 270 if (musb->gadget_driver) { 271 pm_runtime_get_sync(dev); 272 omap_control_usb_set_mode(glue->control_otghs, 273 USB_MODE_HOST); 274 omap2430_musb_set_vbus(musb, 1); 275 } 276 break; 277 278 case OMAP_MUSB_VBUS_VALID: 279 dev_dbg(dev, "VBUS Connect\n"); 280 281 otg->default_a = false; 282 musb->xceiv->state = OTG_STATE_B_IDLE; 283 musb->xceiv->last_event = USB_EVENT_VBUS; 284 if (musb->gadget_driver) 285 pm_runtime_get_sync(dev); 286 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); 287 break; 288 289 case OMAP_MUSB_ID_FLOAT: 290 case OMAP_MUSB_VBUS_OFF: 291 dev_dbg(dev, "VBUS Disconnect\n"); 292 293 musb->xceiv->last_event = USB_EVENT_NONE; 294 if (musb->gadget_driver) { 295 omap2430_musb_set_vbus(musb, 0); 296 pm_runtime_mark_last_busy(dev); 297 pm_runtime_put_autosuspend(dev); 298 } 299 300 if (data->interface_type == MUSB_INTERFACE_UTMI) 301 otg_set_vbus(musb->xceiv->otg, 0); 302 303 omap_control_usb_set_mode(glue->control_otghs, 304 USB_MODE_DISCONNECT); 305 break; 306 default: 307 dev_dbg(dev, "ID float\n"); 308 } 309 310 atomic_notifier_call_chain(&musb->xceiv->notifier, 311 musb->xceiv->last_event, NULL); 312 } 313 314 315 static void omap_musb_mailbox_work(struct work_struct *mailbox_work) 316 { 317 struct omap2430_glue *glue = container_of(mailbox_work, 318 struct omap2430_glue, omap_musb_mailbox_work); 319 omap_musb_set_mailbox(glue); 320 } 321 322 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) 323 { 324 unsigned long flags; 325 irqreturn_t retval = IRQ_NONE; 326 struct musb *musb = __hci; 327 328 spin_lock_irqsave(&musb->lock, flags); 329 330 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); 331 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); 332 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); 333 334 if (musb->int_usb || musb->int_tx || musb->int_rx) 335 retval = musb_interrupt(musb); 336 337 spin_unlock_irqrestore(&musb->lock, flags); 338 339 return retval; 340 } 341 342 static int omap2430_musb_init(struct musb *musb) 343 { 344 u32 l; 345 int status = 0; 346 struct device *dev = musb->controller; 347 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 348 struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); 349 struct omap_musb_board_data *data = plat->board_data; 350 351 /* We require some kind of external transceiver, hooked 352 * up through ULPI. TWL4030-family PMICs include one, 353 * which needs a driver, drivers aren't always needed. 354 */ 355 if (dev->parent->of_node) { 356 musb->phy = devm_phy_get(dev->parent, "usb2-phy"); 357 358 /* We can't totally remove musb->xceiv as of now because 359 * musb core uses xceiv.state and xceiv.otg. Once we have 360 * a separate state machine to handle otg, these can be moved 361 * out of xceiv and then we can start using the generic PHY 362 * framework 363 */ 364 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, 365 "usb-phy", 0); 366 } else { 367 musb->xceiv = devm_usb_get_phy_dev(dev, 0); 368 musb->phy = devm_phy_get(dev, "usb"); 369 } 370 371 if (IS_ERR(musb->xceiv)) { 372 status = PTR_ERR(musb->xceiv); 373 374 if (status == -ENXIO) 375 return status; 376 377 pr_err("HS USB OTG: no transceiver configured\n"); 378 return -EPROBE_DEFER; 379 } 380 381 if (IS_ERR(musb->phy)) { 382 pr_err("HS USB OTG: no PHY configured\n"); 383 return PTR_ERR(musb->phy); 384 } 385 musb->isr = omap2430_musb_interrupt; 386 387 status = pm_runtime_get_sync(dev); 388 if (status < 0) { 389 dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); 390 goto err1; 391 } 392 393 l = musb_readl(musb->mregs, OTG_INTERFSEL); 394 395 if (data->interface_type == MUSB_INTERFACE_UTMI) { 396 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */ 397 l &= ~ULPI_12PIN; /* Disable ULPI */ 398 l |= UTMI_8BIT; /* Enable UTMI */ 399 } else { 400 l |= ULPI_12PIN; 401 } 402 403 musb_writel(musb->mregs, OTG_INTERFSEL, l); 404 405 pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, " 406 "sysstatus 0x%x, intrfsel 0x%x, simenable 0x%x\n", 407 musb_readl(musb->mregs, OTG_REVISION), 408 musb_readl(musb->mregs, OTG_SYSCONFIG), 409 musb_readl(musb->mregs, OTG_SYSSTATUS), 410 musb_readl(musb->mregs, OTG_INTERFSEL), 411 musb_readl(musb->mregs, OTG_SIMENABLE)); 412 413 setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); 414 415 if (glue->status != OMAP_MUSB_UNKNOWN) 416 omap_musb_set_mailbox(glue); 417 418 phy_init(musb->phy); 419 420 pm_runtime_put_noidle(musb->controller); 421 return 0; 422 423 err1: 424 return status; 425 } 426 427 static void omap2430_musb_enable(struct musb *musb) 428 { 429 u8 devctl; 430 unsigned long timeout = jiffies + msecs_to_jiffies(1000); 431 struct device *dev = musb->controller; 432 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 433 struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); 434 struct omap_musb_board_data *data = pdata->board_data; 435 436 switch (glue->status) { 437 438 case OMAP_MUSB_ID_GROUND: 439 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); 440 if (data->interface_type != MUSB_INTERFACE_UTMI) 441 break; 442 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 443 /* start the session */ 444 devctl |= MUSB_DEVCTL_SESSION; 445 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 446 while (musb_readb(musb->mregs, MUSB_DEVCTL) & 447 MUSB_DEVCTL_BDEVICE) { 448 cpu_relax(); 449 450 if (time_after(jiffies, timeout)) { 451 dev_err(dev, "configured as A device timeout"); 452 break; 453 } 454 } 455 break; 456 457 case OMAP_MUSB_VBUS_VALID: 458 omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); 459 break; 460 461 default: 462 break; 463 } 464 } 465 466 static void omap2430_musb_disable(struct musb *musb) 467 { 468 struct device *dev = musb->controller; 469 struct omap2430_glue *glue = dev_get_drvdata(dev->parent); 470 471 if (glue->status != OMAP_MUSB_UNKNOWN) 472 omap_control_usb_set_mode(glue->control_otghs, 473 USB_MODE_DISCONNECT); 474 } 475 476 static int omap2430_musb_exit(struct musb *musb) 477 { 478 del_timer_sync(&musb_idle_timer); 479 480 omap2430_low_level_exit(musb); 481 phy_exit(musb->phy); 482 483 return 0; 484 } 485 486 static const struct musb_platform_ops omap2430_ops = { 487 .init = omap2430_musb_init, 488 .exit = omap2430_musb_exit, 489 490 .set_mode = omap2430_musb_set_mode, 491 .try_idle = omap2430_musb_try_idle, 492 493 .set_vbus = omap2430_musb_set_vbus, 494 495 .enable = omap2430_musb_enable, 496 .disable = omap2430_musb_disable, 497 }; 498 499 static u64 omap2430_dmamask = DMA_BIT_MASK(32); 500 501 static int omap2430_probe(struct platform_device *pdev) 502 { 503 struct resource musb_resources[3]; 504 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); 505 struct omap_musb_board_data *data; 506 struct platform_device *musb; 507 struct omap2430_glue *glue; 508 struct device_node *np = pdev->dev.of_node; 509 struct musb_hdrc_config *config; 510 int ret = -ENOMEM; 511 512 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 513 if (!glue) { 514 dev_err(&pdev->dev, "failed to allocate glue context\n"); 515 goto err0; 516 } 517 518 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); 519 if (!musb) { 520 dev_err(&pdev->dev, "failed to allocate musb device\n"); 521 goto err0; 522 } 523 524 musb->dev.parent = &pdev->dev; 525 musb->dev.dma_mask = &omap2430_dmamask; 526 musb->dev.coherent_dma_mask = omap2430_dmamask; 527 528 glue->dev = &pdev->dev; 529 glue->musb = musb; 530 glue->status = OMAP_MUSB_UNKNOWN; 531 glue->control_otghs = ERR_PTR(-ENODEV); 532 533 if (np) { 534 struct device_node *control_node; 535 struct platform_device *control_pdev; 536 537 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 538 if (!pdata) { 539 dev_err(&pdev->dev, 540 "failed to allocate musb platform data\n"); 541 goto err2; 542 } 543 544 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); 545 if (!data) { 546 dev_err(&pdev->dev, 547 "failed to allocate musb board data\n"); 548 goto err2; 549 } 550 551 config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL); 552 if (!config) { 553 dev_err(&pdev->dev, 554 "failed to allocate musb hdrc config\n"); 555 goto err2; 556 } 557 558 of_property_read_u32(np, "mode", (u32 *)&pdata->mode); 559 of_property_read_u32(np, "interface-type", 560 (u32 *)&data->interface_type); 561 of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps); 562 of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); 563 of_property_read_u32(np, "power", (u32 *)&pdata->power); 564 config->multipoint = of_property_read_bool(np, "multipoint"); 565 566 pdata->board_data = data; 567 pdata->config = config; 568 569 control_node = of_parse_phandle(np, "ctrl-module", 0); 570 if (control_node) { 571 control_pdev = of_find_device_by_node(control_node); 572 if (!control_pdev) { 573 dev_err(&pdev->dev, "Failed to get control device\n"); 574 ret = -EINVAL; 575 goto err2; 576 } 577 glue->control_otghs = &control_pdev->dev; 578 } 579 } 580 pdata->platform_ops = &omap2430_ops; 581 582 platform_set_drvdata(pdev, glue); 583 584 /* 585 * REVISIT if we ever have two instances of the wrapper, we will be 586 * in big trouble 587 */ 588 _glue = glue; 589 590 INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work); 591 592 memset(musb_resources, 0x00, sizeof(*musb_resources) * 593 ARRAY_SIZE(musb_resources)); 594 595 musb_resources[0].name = pdev->resource[0].name; 596 musb_resources[0].start = pdev->resource[0].start; 597 musb_resources[0].end = pdev->resource[0].end; 598 musb_resources[0].flags = pdev->resource[0].flags; 599 600 musb_resources[1].name = pdev->resource[1].name; 601 musb_resources[1].start = pdev->resource[1].start; 602 musb_resources[1].end = pdev->resource[1].end; 603 musb_resources[1].flags = pdev->resource[1].flags; 604 605 musb_resources[2].name = pdev->resource[2].name; 606 musb_resources[2].start = pdev->resource[2].start; 607 musb_resources[2].end = pdev->resource[2].end; 608 musb_resources[2].flags = pdev->resource[2].flags; 609 610 ret = platform_device_add_resources(musb, musb_resources, 611 ARRAY_SIZE(musb_resources)); 612 if (ret) { 613 dev_err(&pdev->dev, "failed to add resources\n"); 614 goto err2; 615 } 616 617 ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); 618 if (ret) { 619 dev_err(&pdev->dev, "failed to add platform_data\n"); 620 goto err2; 621 } 622 623 pm_runtime_enable(&pdev->dev); 624 625 ret = platform_device_add(musb); 626 if (ret) { 627 dev_err(&pdev->dev, "failed to register musb device\n"); 628 goto err2; 629 } 630 631 return 0; 632 633 err2: 634 platform_device_put(musb); 635 636 err0: 637 return ret; 638 } 639 640 static int omap2430_remove(struct platform_device *pdev) 641 { 642 struct omap2430_glue *glue = platform_get_drvdata(pdev); 643 644 cancel_work_sync(&glue->omap_musb_mailbox_work); 645 platform_device_unregister(glue->musb); 646 647 return 0; 648 } 649 650 #ifdef CONFIG_PM 651 652 static int omap2430_runtime_suspend(struct device *dev) 653 { 654 struct omap2430_glue *glue = dev_get_drvdata(dev); 655 struct musb *musb = glue_to_musb(glue); 656 657 if (musb) { 658 musb->context.otg_interfsel = musb_readl(musb->mregs, 659 OTG_INTERFSEL); 660 661 omap2430_low_level_exit(musb); 662 phy_power_off(musb->phy); 663 } 664 665 return 0; 666 } 667 668 static int omap2430_runtime_resume(struct device *dev) 669 { 670 struct omap2430_glue *glue = dev_get_drvdata(dev); 671 struct musb *musb = glue_to_musb(glue); 672 673 if (musb) { 674 omap2430_low_level_init(musb); 675 musb_writel(musb->mregs, OTG_INTERFSEL, 676 musb->context.otg_interfsel); 677 phy_power_on(musb->phy); 678 } 679 680 return 0; 681 } 682 683 static struct dev_pm_ops omap2430_pm_ops = { 684 .runtime_suspend = omap2430_runtime_suspend, 685 .runtime_resume = omap2430_runtime_resume, 686 }; 687 688 #define DEV_PM_OPS (&omap2430_pm_ops) 689 #else 690 #define DEV_PM_OPS NULL 691 #endif 692 693 #ifdef CONFIG_OF 694 static const struct of_device_id omap2430_id_table[] = { 695 { 696 .compatible = "ti,omap4-musb" 697 }, 698 { 699 .compatible = "ti,omap3-musb" 700 }, 701 {}, 702 }; 703 MODULE_DEVICE_TABLE(of, omap2430_id_table); 704 #endif 705 706 static struct platform_driver omap2430_driver = { 707 .probe = omap2430_probe, 708 .remove = omap2430_remove, 709 .driver = { 710 .name = "musb-omap2430", 711 .pm = DEV_PM_OPS, 712 .of_match_table = of_match_ptr(omap2430_id_table), 713 }, 714 }; 715 716 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); 717 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 718 MODULE_LICENSE("GPL v2"); 719 720 static int __init omap2430_init(void) 721 { 722 return platform_driver_register(&omap2430_driver); 723 } 724 subsys_initcall(omap2430_init); 725 726 static void __exit omap2430_exit(void) 727 { 728 platform_driver_unregister(&omap2430_driver); 729 } 730 module_exit(omap2430_exit); 731