1 /* 2 * MUSB OTG driver - support for Mentor's DMA controller 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2007 by Texas Instruments 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License 9 * version 2 as published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, but 12 * WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 19 * 02110-1301 USA 20 * 21 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 22 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 23 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 24 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 27 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 28 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 */ 33 #include <linux/device.h> 34 #include <linux/interrupt.h> 35 #include <linux/platform_device.h> 36 #include <linux/slab.h> 37 #include "musb_core.h" 38 #include "musbhsdma.h" 39 40 static void dma_channel_release(struct dma_channel *channel); 41 42 static void dma_controller_stop(struct musb_dma_controller *controller) 43 { 44 struct musb *musb = controller->private_data; 45 struct dma_channel *channel; 46 u8 bit; 47 48 if (controller->used_channels != 0) { 49 dev_err(musb->controller, 50 "Stopping DMA controller while channel active\n"); 51 52 for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) { 53 if (controller->used_channels & (1 << bit)) { 54 channel = &controller->channel[bit].channel; 55 dma_channel_release(channel); 56 57 if (!controller->used_channels) 58 break; 59 } 60 } 61 } 62 } 63 64 static struct dma_channel *dma_channel_allocate(struct dma_controller *c, 65 struct musb_hw_ep *hw_ep, u8 transmit) 66 { 67 struct musb_dma_controller *controller = container_of(c, 68 struct musb_dma_controller, controller); 69 struct musb_dma_channel *musb_channel = NULL; 70 struct dma_channel *channel = NULL; 71 u8 bit; 72 73 for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) { 74 if (!(controller->used_channels & (1 << bit))) { 75 controller->used_channels |= (1 << bit); 76 musb_channel = &(controller->channel[bit]); 77 musb_channel->controller = controller; 78 musb_channel->idx = bit; 79 musb_channel->epnum = hw_ep->epnum; 80 musb_channel->transmit = transmit; 81 channel = &(musb_channel->channel); 82 channel->private_data = musb_channel; 83 channel->status = MUSB_DMA_STATUS_FREE; 84 channel->max_len = 0x100000; 85 /* Tx => mode 1; Rx => mode 0 */ 86 channel->desired_mode = transmit; 87 channel->actual_len = 0; 88 break; 89 } 90 } 91 92 return channel; 93 } 94 95 static void dma_channel_release(struct dma_channel *channel) 96 { 97 struct musb_dma_channel *musb_channel = channel->private_data; 98 99 channel->actual_len = 0; 100 musb_channel->start_addr = 0; 101 musb_channel->len = 0; 102 103 musb_channel->controller->used_channels &= 104 ~(1 << musb_channel->idx); 105 106 channel->status = MUSB_DMA_STATUS_UNKNOWN; 107 } 108 109 static void configure_channel(struct dma_channel *channel, 110 u16 packet_sz, u8 mode, 111 dma_addr_t dma_addr, u32 len) 112 { 113 struct musb_dma_channel *musb_channel = channel->private_data; 114 struct musb_dma_controller *controller = musb_channel->controller; 115 struct musb *musb = controller->private_data; 116 void __iomem *mbase = controller->base; 117 u8 bchannel = musb_channel->idx; 118 u16 csr = 0; 119 120 musb_dbg(musb, "%p, pkt_sz %d, addr %pad, len %d, mode %d", 121 channel, packet_sz, &dma_addr, len, mode); 122 123 if (mode) { 124 csr |= 1 << MUSB_HSDMA_MODE1_SHIFT; 125 BUG_ON(len < packet_sz); 126 } 127 csr |= MUSB_HSDMA_BURSTMODE_INCR16 128 << MUSB_HSDMA_BURSTMODE_SHIFT; 129 130 csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT) 131 | (1 << MUSB_HSDMA_ENABLE_SHIFT) 132 | (1 << MUSB_HSDMA_IRQENABLE_SHIFT) 133 | (musb_channel->transmit 134 ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT) 135 : 0); 136 137 /* address/count */ 138 musb_write_hsdma_addr(mbase, bchannel, dma_addr); 139 musb_write_hsdma_count(mbase, bchannel, len); 140 141 /* control (this should start things) */ 142 musb_writew(mbase, 143 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), 144 csr); 145 } 146 147 static int dma_channel_program(struct dma_channel *channel, 148 u16 packet_sz, u8 mode, 149 dma_addr_t dma_addr, u32 len) 150 { 151 struct musb_dma_channel *musb_channel = channel->private_data; 152 struct musb_dma_controller *controller = musb_channel->controller; 153 struct musb *musb = controller->private_data; 154 155 musb_dbg(musb, "ep%d-%s pkt_sz %d, dma_addr %pad length %d, mode %d", 156 musb_channel->epnum, 157 musb_channel->transmit ? "Tx" : "Rx", 158 packet_sz, &dma_addr, len, mode); 159 160 BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || 161 channel->status == MUSB_DMA_STATUS_BUSY); 162 163 /* Let targets check/tweak the arguments */ 164 if (musb->ops->adjust_channel_params) { 165 int ret = musb->ops->adjust_channel_params(channel, 166 packet_sz, &mode, &dma_addr, &len); 167 if (ret) 168 return ret; 169 } 170 171 /* 172 * The DMA engine in RTL1.8 and above cannot handle 173 * DMA addresses that are not aligned to a 4 byte boundary. 174 * It ends up masking the last two bits of the address 175 * programmed in DMA_ADDR. 176 * 177 * Fail such DMA transfers, so that the backup PIO mode 178 * can carry out the transfer 179 */ 180 if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4)) 181 return false; 182 183 channel->actual_len = 0; 184 musb_channel->start_addr = dma_addr; 185 musb_channel->len = len; 186 musb_channel->max_packet_sz = packet_sz; 187 channel->status = MUSB_DMA_STATUS_BUSY; 188 189 configure_channel(channel, packet_sz, mode, dma_addr, len); 190 191 return true; 192 } 193 194 static int dma_channel_abort(struct dma_channel *channel) 195 { 196 struct musb_dma_channel *musb_channel = channel->private_data; 197 void __iomem *mbase = musb_channel->controller->base; 198 struct musb *musb = musb_channel->controller->private_data; 199 200 u8 bchannel = musb_channel->idx; 201 int offset; 202 u16 csr; 203 204 if (channel->status == MUSB_DMA_STATUS_BUSY) { 205 if (musb_channel->transmit) { 206 offset = musb->io.ep_offset(musb_channel->epnum, 207 MUSB_TXCSR); 208 209 /* 210 * The programming guide says that we must clear 211 * the DMAENAB bit before the DMAMODE bit... 212 */ 213 csr = musb_readw(mbase, offset); 214 csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); 215 musb_writew(mbase, offset, csr); 216 csr &= ~MUSB_TXCSR_DMAMODE; 217 musb_writew(mbase, offset, csr); 218 } else { 219 offset = musb->io.ep_offset(musb_channel->epnum, 220 MUSB_RXCSR); 221 222 csr = musb_readw(mbase, offset); 223 csr &= ~(MUSB_RXCSR_AUTOCLEAR | 224 MUSB_RXCSR_DMAENAB | 225 MUSB_RXCSR_DMAMODE); 226 musb_writew(mbase, offset, csr); 227 } 228 229 musb_writew(mbase, 230 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), 231 0); 232 musb_write_hsdma_addr(mbase, bchannel, 0); 233 musb_write_hsdma_count(mbase, bchannel, 0); 234 channel->status = MUSB_DMA_STATUS_FREE; 235 } 236 237 return 0; 238 } 239 240 static irqreturn_t dma_controller_irq(int irq, void *private_data) 241 { 242 struct musb_dma_controller *controller = private_data; 243 struct musb *musb = controller->private_data; 244 struct musb_dma_channel *musb_channel; 245 struct dma_channel *channel; 246 247 void __iomem *mbase = controller->base; 248 249 irqreturn_t retval = IRQ_NONE; 250 251 unsigned long flags; 252 253 u8 bchannel; 254 u8 int_hsdma; 255 256 u32 addr, count; 257 u16 csr; 258 259 spin_lock_irqsave(&musb->lock, flags); 260 261 int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR); 262 263 #ifdef CONFIG_BLACKFIN 264 /* Clear DMA interrupt flags */ 265 musb_writeb(mbase, MUSB_HSDMA_INTR, int_hsdma); 266 #endif 267 268 if (!int_hsdma) { 269 musb_dbg(musb, "spurious DMA irq"); 270 271 for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { 272 musb_channel = (struct musb_dma_channel *) 273 &(controller->channel[bchannel]); 274 channel = &musb_channel->channel; 275 if (channel->status == MUSB_DMA_STATUS_BUSY) { 276 count = musb_read_hsdma_count(mbase, bchannel); 277 278 if (count == 0) 279 int_hsdma |= (1 << bchannel); 280 } 281 } 282 283 musb_dbg(musb, "int_hsdma = 0x%x", int_hsdma); 284 285 if (!int_hsdma) 286 goto done; 287 } 288 289 for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) { 290 if (int_hsdma & (1 << bchannel)) { 291 musb_channel = (struct musb_dma_channel *) 292 &(controller->channel[bchannel]); 293 channel = &musb_channel->channel; 294 295 csr = musb_readw(mbase, 296 MUSB_HSDMA_CHANNEL_OFFSET(bchannel, 297 MUSB_HSDMA_CONTROL)); 298 299 if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) { 300 musb_channel->channel.status = 301 MUSB_DMA_STATUS_BUS_ABORT; 302 } else { 303 u8 devctl; 304 305 addr = musb_read_hsdma_addr(mbase, 306 bchannel); 307 channel->actual_len = addr 308 - musb_channel->start_addr; 309 310 musb_dbg(musb, "ch %p, 0x%x -> 0x%x (%zu / %d) %s", 311 channel, musb_channel->start_addr, 312 addr, channel->actual_len, 313 musb_channel->len, 314 (channel->actual_len 315 < musb_channel->len) ? 316 "=> reconfig 0" : "=> complete"); 317 318 devctl = musb_readb(mbase, MUSB_DEVCTL); 319 320 channel->status = MUSB_DMA_STATUS_FREE; 321 322 /* completed */ 323 if ((devctl & MUSB_DEVCTL_HM) 324 && (musb_channel->transmit) 325 && ((channel->desired_mode == 0) 326 || (channel->actual_len & 327 (musb_channel->max_packet_sz - 1))) 328 ) { 329 u8 epnum = musb_channel->epnum; 330 int offset = musb->io.ep_offset(epnum, 331 MUSB_TXCSR); 332 u16 txcsr; 333 334 /* 335 * The programming guide says that we 336 * must clear DMAENAB before DMAMODE. 337 */ 338 musb_ep_select(mbase, epnum); 339 txcsr = musb_readw(mbase, offset); 340 txcsr &= ~(MUSB_TXCSR_DMAENAB 341 | MUSB_TXCSR_AUTOSET); 342 musb_writew(mbase, offset, txcsr); 343 /* Send out the packet */ 344 txcsr &= ~MUSB_TXCSR_DMAMODE; 345 txcsr |= MUSB_TXCSR_TXPKTRDY; 346 musb_writew(mbase, offset, txcsr); 347 } 348 musb_dma_completion(musb, musb_channel->epnum, 349 musb_channel->transmit); 350 } 351 } 352 } 353 354 retval = IRQ_HANDLED; 355 done: 356 spin_unlock_irqrestore(&musb->lock, flags); 357 return retval; 358 } 359 360 void musbhs_dma_controller_destroy(struct dma_controller *c) 361 { 362 struct musb_dma_controller *controller = container_of(c, 363 struct musb_dma_controller, controller); 364 365 dma_controller_stop(controller); 366 367 if (controller->irq) 368 free_irq(controller->irq, c); 369 370 kfree(controller); 371 } 372 EXPORT_SYMBOL_GPL(musbhs_dma_controller_destroy); 373 374 struct dma_controller *musbhs_dma_controller_create(struct musb *musb, 375 void __iomem *base) 376 { 377 struct musb_dma_controller *controller; 378 struct device *dev = musb->controller; 379 struct platform_device *pdev = to_platform_device(dev); 380 int irq = platform_get_irq_byname(pdev, "dma"); 381 382 if (irq <= 0) { 383 dev_err(dev, "No DMA interrupt line!\n"); 384 return NULL; 385 } 386 387 controller = kzalloc(sizeof(*controller), GFP_KERNEL); 388 if (!controller) 389 return NULL; 390 391 controller->channel_count = MUSB_HSDMA_CHANNELS; 392 controller->private_data = musb; 393 controller->base = base; 394 395 controller->controller.channel_alloc = dma_channel_allocate; 396 controller->controller.channel_release = dma_channel_release; 397 controller->controller.channel_program = dma_channel_program; 398 controller->controller.channel_abort = dma_channel_abort; 399 400 if (request_irq(irq, dma_controller_irq, 0, 401 dev_name(musb->controller), &controller->controller)) { 402 dev_err(dev, "request_irq %d failed!\n", irq); 403 musb_dma_controller_destroy(&controller->controller); 404 405 return NULL; 406 } 407 408 controller->irq = irq; 409 410 return &controller->controller; 411 } 412 EXPORT_SYMBOL_GPL(musbhs_dma_controller_create); 413