1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * MUSB OTG driver virtual root hub support 4 * 5 * Copyright 2005 Mentor Graphics Corporation 6 * Copyright (C) 2005-2006 by Texas Instruments 7 * Copyright (C) 2006-2007 Nokia Corporation 8 */ 9 10 #include <linux/module.h> 11 #include <linux/kernel.h> 12 #include <linux/sched.h> 13 #include <linux/errno.h> 14 #include <linux/time.h> 15 #include <linux/timer.h> 16 17 #include <asm/unaligned.h> 18 19 #include "musb_core.h" 20 21 void musb_host_finish_resume(struct work_struct *work) 22 { 23 struct musb *musb; 24 unsigned long flags; 25 u8 power; 26 27 musb = container_of(work, struct musb, finish_resume_work.work); 28 29 spin_lock_irqsave(&musb->lock, flags); 30 31 power = musb_readb(musb->mregs, MUSB_POWER); 32 power &= ~MUSB_POWER_RESUME; 33 musb_dbg(musb, "root port resume stopped, power %02x", power); 34 musb_writeb(musb->mregs, MUSB_POWER, power); 35 36 /* 37 * ISSUE: DaVinci (RTL 1.300) disconnects after 38 * resume of high speed peripherals (but not full 39 * speed ones). 40 */ 41 musb->is_active = 1; 42 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME); 43 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 44 usb_hcd_poll_rh_status(musb->hcd); 45 /* NOTE: it might really be A_WAIT_BCON ... */ 46 musb_set_state(musb, OTG_STATE_A_HOST); 47 48 spin_unlock_irqrestore(&musb->lock, flags); 49 } 50 51 int musb_port_suspend(struct musb *musb, bool do_suspend) 52 { 53 u8 power; 54 void __iomem *mbase = musb->mregs; 55 56 if (!is_host_active(musb)) 57 return 0; 58 59 /* NOTE: this doesn't necessarily put PHY into low power mode, 60 * turning off its clock; that's a function of PHY integration and 61 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect 62 * SE0 changing to connect (J) or wakeup (K) states. 63 */ 64 power = musb_readb(mbase, MUSB_POWER); 65 if (do_suspend) { 66 int retries = 10000; 67 68 if (power & MUSB_POWER_RESUME) 69 return -EBUSY; 70 71 if (!(power & MUSB_POWER_SUSPENDM)) { 72 power |= MUSB_POWER_SUSPENDM; 73 musb_writeb(mbase, MUSB_POWER, power); 74 75 /* Needed for OPT A tests */ 76 power = musb_readb(mbase, MUSB_POWER); 77 while (power & MUSB_POWER_SUSPENDM) { 78 power = musb_readb(mbase, MUSB_POWER); 79 if (retries-- < 1) 80 break; 81 } 82 } 83 84 musb_dbg(musb, "Root port suspended, power %02x", power); 85 86 musb->port1_status |= USB_PORT_STAT_SUSPEND; 87 switch (musb_get_state(musb)) { 88 case OTG_STATE_A_HOST: 89 musb_set_state(musb, OTG_STATE_A_SUSPEND); 90 musb->is_active = musb->xceiv && 91 musb->xceiv->otg->host->b_hnp_enable; 92 if (musb->is_active) 93 mod_timer(&musb->otg_timer, jiffies 94 + msecs_to_jiffies( 95 OTG_TIME_A_AIDL_BDIS)); 96 musb_platform_try_idle(musb, 0); 97 break; 98 case OTG_STATE_B_HOST: 99 musb_set_state(musb, OTG_STATE_B_WAIT_ACON); 100 musb->is_active = musb->xceiv && 101 musb->xceiv->otg->host->b_hnp_enable; 102 musb_platform_try_idle(musb, 0); 103 break; 104 default: 105 musb_dbg(musb, "bogus rh suspend? %s", 106 musb_otg_state_string(musb)); 107 } 108 } else if (power & MUSB_POWER_SUSPENDM) { 109 power &= ~MUSB_POWER_SUSPENDM; 110 power |= MUSB_POWER_RESUME; 111 musb_writeb(mbase, MUSB_POWER, power); 112 113 musb_dbg(musb, "Root port resuming, power %02x", power); 114 115 musb->port1_status |= MUSB_PORT_STAT_RESUME; 116 schedule_delayed_work(&musb->finish_resume_work, 117 msecs_to_jiffies(USB_RESUME_TIMEOUT)); 118 } 119 return 0; 120 } 121 122 void musb_port_reset(struct musb *musb, bool do_reset) 123 { 124 u8 power; 125 void __iomem *mbase = musb->mregs; 126 127 if (musb_get_state(musb) == OTG_STATE_B_IDLE) { 128 musb_dbg(musb, "HNP: Returning from HNP; no hub reset from b_idle"); 129 musb->port1_status &= ~USB_PORT_STAT_RESET; 130 return; 131 } 132 133 if (!is_host_active(musb)) 134 return; 135 136 /* NOTE: caller guarantees it will turn off the reset when 137 * the appropriate amount of time has passed 138 */ 139 power = musb_readb(mbase, MUSB_POWER); 140 if (do_reset) { 141 /* 142 * If RESUME is set, we must make sure it stays minimum 20 ms. 143 * Then we must clear RESUME and wait a bit to let musb start 144 * generating SOFs. If we don't do this, OPT HS A 6.8 tests 145 * fail with "Error! Did not receive an SOF before suspend 146 * detected". 147 */ 148 if (power & MUSB_POWER_RESUME) { 149 long remain = (unsigned long) musb->rh_timer - jiffies; 150 151 if (musb->rh_timer > 0 && remain > 0) { 152 /* take into account the minimum delay after resume */ 153 schedule_delayed_work( 154 &musb->deassert_reset_work, remain); 155 return; 156 } 157 158 musb_writeb(mbase, MUSB_POWER, 159 power & ~MUSB_POWER_RESUME); 160 161 /* Give the core 1 ms to clear MUSB_POWER_RESUME */ 162 schedule_delayed_work(&musb->deassert_reset_work, 163 msecs_to_jiffies(1)); 164 return; 165 } 166 167 power &= 0xf0; 168 musb_writeb(mbase, MUSB_POWER, 169 power | MUSB_POWER_RESET); 170 171 musb->port1_status |= USB_PORT_STAT_RESET; 172 musb->port1_status &= ~USB_PORT_STAT_ENABLE; 173 schedule_delayed_work(&musb->deassert_reset_work, 174 msecs_to_jiffies(50)); 175 } else { 176 musb_dbg(musb, "root port reset stopped"); 177 musb_platform_pre_root_reset_end(musb); 178 musb_writeb(mbase, MUSB_POWER, 179 power & ~MUSB_POWER_RESET); 180 musb_platform_post_root_reset_end(musb); 181 182 power = musb_readb(mbase, MUSB_POWER); 183 if (power & MUSB_POWER_HSMODE) { 184 musb_dbg(musb, "high-speed device connected"); 185 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; 186 } 187 188 musb->port1_status &= ~USB_PORT_STAT_RESET; 189 musb->port1_status |= USB_PORT_STAT_ENABLE 190 | (USB_PORT_STAT_C_RESET << 16) 191 | (USB_PORT_STAT_C_ENABLE << 16); 192 usb_hcd_poll_rh_status(musb->hcd); 193 194 musb->vbuserr_retry = VBUSERR_RETRY_COUNT; 195 } 196 } 197 198 void musb_root_disconnect(struct musb *musb) 199 { 200 musb->port1_status = USB_PORT_STAT_POWER 201 | (USB_PORT_STAT_C_CONNECTION << 16); 202 203 usb_hcd_poll_rh_status(musb->hcd); 204 musb->is_active = 0; 205 206 switch (musb_get_state(musb)) { 207 case OTG_STATE_A_SUSPEND: 208 if (musb->xceiv && musb->xceiv->otg->host->b_hnp_enable) { 209 musb_set_state(musb, OTG_STATE_A_PERIPHERAL); 210 musb->g.is_a_peripheral = 1; 211 break; 212 } 213 fallthrough; 214 case OTG_STATE_A_HOST: 215 musb_set_state(musb, OTG_STATE_A_WAIT_BCON); 216 musb->is_active = 0; 217 break; 218 case OTG_STATE_A_WAIT_VFALL: 219 musb_set_state(musb, OTG_STATE_B_IDLE); 220 break; 221 default: 222 musb_dbg(musb, "host disconnect (%s)", 223 musb_otg_state_string(musb)); 224 } 225 } 226 EXPORT_SYMBOL_GPL(musb_root_disconnect); 227 228 229 /*---------------------------------------------------------------------*/ 230 231 /* Caller may or may not hold musb->lock */ 232 int musb_hub_status_data(struct usb_hcd *hcd, char *buf) 233 { 234 struct musb *musb = hcd_to_musb(hcd); 235 int retval = 0; 236 237 /* called in_irq() via usb_hcd_poll_rh_status() */ 238 if (musb->port1_status & 0xffff0000) { 239 *buf = 0x02; 240 retval = 1; 241 } 242 return retval; 243 } 244 245 static int musb_has_gadget(struct musb *musb) 246 { 247 /* 248 * In host-only mode we start a connection right away. In OTG mode 249 * we have to wait until we loaded a gadget. We don't really need a 250 * gadget if we operate as a host but we should not start a session 251 * as a device without a gadget or else we explode. 252 */ 253 #ifdef CONFIG_USB_MUSB_HOST 254 return 1; 255 #else 256 return musb->port_mode == MUSB_HOST; 257 #endif 258 } 259 260 int musb_hub_control( 261 struct usb_hcd *hcd, 262 u16 typeReq, 263 u16 wValue, 264 u16 wIndex, 265 char *buf, 266 u16 wLength) 267 { 268 struct musb *musb = hcd_to_musb(hcd); 269 u32 temp; 270 int retval = 0; 271 unsigned long flags; 272 bool start_musb = false; 273 274 spin_lock_irqsave(&musb->lock, flags); 275 276 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { 277 spin_unlock_irqrestore(&musb->lock, flags); 278 return -ESHUTDOWN; 279 } 280 281 /* hub features: always zero, setting is a NOP 282 * port features: reported, sometimes updated when host is active 283 * no indicators 284 */ 285 switch (typeReq) { 286 case ClearHubFeature: 287 case SetHubFeature: 288 switch (wValue) { 289 case C_HUB_OVER_CURRENT: 290 case C_HUB_LOCAL_POWER: 291 break; 292 default: 293 goto error; 294 } 295 break; 296 case ClearPortFeature: 297 if ((wIndex & 0xff) != 1) 298 goto error; 299 300 switch (wValue) { 301 case USB_PORT_FEAT_ENABLE: 302 break; 303 case USB_PORT_FEAT_SUSPEND: 304 musb_port_suspend(musb, false); 305 break; 306 case USB_PORT_FEAT_POWER: 307 if (!hcd->self.is_b_host) 308 musb_platform_set_vbus(musb, 0); 309 break; 310 case USB_PORT_FEAT_C_CONNECTION: 311 case USB_PORT_FEAT_C_ENABLE: 312 case USB_PORT_FEAT_C_OVER_CURRENT: 313 case USB_PORT_FEAT_C_RESET: 314 case USB_PORT_FEAT_C_SUSPEND: 315 break; 316 default: 317 goto error; 318 } 319 musb_dbg(musb, "clear feature %d", wValue); 320 musb->port1_status &= ~(1 << wValue); 321 break; 322 case GetHubDescriptor: 323 { 324 struct usb_hub_descriptor *desc = (void *)buf; 325 326 desc->bDescLength = 9; 327 desc->bDescriptorType = USB_DT_HUB; 328 desc->bNbrPorts = 1; 329 desc->wHubCharacteristics = cpu_to_le16( 330 HUB_CHAR_INDV_PORT_LPSM /* per-port power switching */ 331 | HUB_CHAR_NO_OCPM /* no overcurrent reporting */ 332 ); 333 desc->bPwrOn2PwrGood = 5; /* msec/2 */ 334 desc->bHubContrCurrent = 0; 335 336 /* workaround bogus struct definition */ 337 desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ 338 desc->u.hs.DeviceRemovable[1] = 0xff; 339 } 340 break; 341 case GetHubStatus: 342 temp = 0; 343 *(__le32 *) buf = cpu_to_le32(temp); 344 break; 345 case GetPortStatus: 346 if (wIndex != 1) 347 goto error; 348 349 put_unaligned(cpu_to_le32(musb->port1_status 350 & ~MUSB_PORT_STAT_RESUME), 351 (__le32 *) buf); 352 353 /* port change status is more interesting */ 354 musb_dbg(musb, "port status %08x", musb->port1_status); 355 break; 356 case SetPortFeature: 357 if ((wIndex & 0xff) != 1) 358 goto error; 359 360 switch (wValue) { 361 case USB_PORT_FEAT_POWER: 362 /* NOTE: this controller has a strange state machine 363 * that involves "requesting sessions" according to 364 * magic side effects from incompletely-described 365 * rules about startup... 366 * 367 * This call is what really starts the host mode; be 368 * very careful about side effects if you reorder any 369 * initialization logic, e.g. for OTG, or change any 370 * logic relating to VBUS power-up. 371 */ 372 if (!hcd->self.is_b_host && musb_has_gadget(musb)) 373 start_musb = true; 374 break; 375 case USB_PORT_FEAT_RESET: 376 musb_port_reset(musb, true); 377 break; 378 case USB_PORT_FEAT_SUSPEND: 379 musb_port_suspend(musb, true); 380 break; 381 case USB_PORT_FEAT_TEST: 382 if (unlikely(is_host_active(musb))) 383 goto error; 384 385 wIndex >>= 8; 386 switch (wIndex) { 387 case USB_TEST_J: 388 pr_debug("USB_TEST_J\n"); 389 temp = MUSB_TEST_J; 390 break; 391 case USB_TEST_K: 392 pr_debug("USB_TEST_K\n"); 393 temp = MUSB_TEST_K; 394 break; 395 case USB_TEST_SE0_NAK: 396 pr_debug("USB_TEST_SE0_NAK\n"); 397 temp = MUSB_TEST_SE0_NAK; 398 break; 399 case USB_TEST_PACKET: 400 pr_debug("USB_TEST_PACKET\n"); 401 temp = MUSB_TEST_PACKET; 402 musb_load_testpacket(musb); 403 break; 404 case USB_TEST_FORCE_ENABLE: 405 pr_debug("USB_TEST_FORCE_ENABLE\n"); 406 temp = MUSB_TEST_FORCE_HOST 407 | MUSB_TEST_FORCE_HS; 408 409 musb_writeb(musb->mregs, MUSB_DEVCTL, 410 MUSB_DEVCTL_SESSION); 411 break; 412 case 6: 413 pr_debug("TEST_FIFO_ACCESS\n"); 414 temp = MUSB_TEST_FIFO_ACCESS; 415 break; 416 default: 417 goto error; 418 } 419 musb_writeb(musb->mregs, MUSB_TESTMODE, temp); 420 break; 421 default: 422 goto error; 423 } 424 musb_dbg(musb, "set feature %d", wValue); 425 musb->port1_status |= 1 << wValue; 426 break; 427 428 default: 429 error: 430 /* "protocol stall" on error */ 431 retval = -EPIPE; 432 } 433 spin_unlock_irqrestore(&musb->lock, flags); 434 435 if (start_musb) 436 musb_start(musb); 437 438 return retval; 439 } 440