1 /* 2 * MUSB OTG driver virtual root hub support 3 * 4 * Copyright 2005 Mentor Graphics Corporation 5 * Copyright (C) 2005-2006 by Texas Instruments 6 * Copyright (C) 2006-2007 Nokia Corporation 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License 10 * version 2 as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope that it will be useful, but 13 * WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 15 * General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 20 * 02110-1301 USA 21 * 22 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED 23 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 24 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 25 * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 29 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35 #include <linux/module.h> 36 #include <linux/kernel.h> 37 #include <linux/sched.h> 38 #include <linux/errno.h> 39 #include <linux/init.h> 40 #include <linux/time.h> 41 #include <linux/timer.h> 42 43 #include <asm/unaligned.h> 44 45 #include "musb_core.h" 46 47 static void musb_port_suspend(struct musb *musb, bool do_suspend) 48 { 49 struct usb_otg *otg = musb->xceiv->otg; 50 u8 power; 51 void __iomem *mbase = musb->mregs; 52 53 if (!is_host_active(musb)) 54 return; 55 56 /* NOTE: this doesn't necessarily put PHY into low power mode, 57 * turning off its clock; that's a function of PHY integration and 58 * MUSB_POWER_ENSUSPEND. PHY may need a clock (sigh) to detect 59 * SE0 changing to connect (J) or wakeup (K) states. 60 */ 61 power = musb_readb(mbase, MUSB_POWER); 62 if (do_suspend) { 63 int retries = 10000; 64 65 power &= ~MUSB_POWER_RESUME; 66 power |= MUSB_POWER_SUSPENDM; 67 musb_writeb(mbase, MUSB_POWER, power); 68 69 /* Needed for OPT A tests */ 70 power = musb_readb(mbase, MUSB_POWER); 71 while (power & MUSB_POWER_SUSPENDM) { 72 power = musb_readb(mbase, MUSB_POWER); 73 if (retries-- < 1) 74 break; 75 } 76 77 dev_dbg(musb->controller, "Root port suspended, power %02x\n", power); 78 79 musb->port1_status |= USB_PORT_STAT_SUSPEND; 80 switch (musb->xceiv->state) { 81 case OTG_STATE_A_HOST: 82 musb->xceiv->state = OTG_STATE_A_SUSPEND; 83 musb->is_active = otg->host->b_hnp_enable; 84 if (musb->is_active) 85 mod_timer(&musb->otg_timer, jiffies 86 + msecs_to_jiffies( 87 OTG_TIME_A_AIDL_BDIS)); 88 musb_platform_try_idle(musb, 0); 89 break; 90 case OTG_STATE_B_HOST: 91 musb->xceiv->state = OTG_STATE_B_WAIT_ACON; 92 musb->is_active = otg->host->b_hnp_enable; 93 musb_platform_try_idle(musb, 0); 94 break; 95 default: 96 dev_dbg(musb->controller, "bogus rh suspend? %s\n", 97 usb_otg_state_string(musb->xceiv->state)); 98 } 99 } else if (power & MUSB_POWER_SUSPENDM) { 100 power &= ~MUSB_POWER_SUSPENDM; 101 power |= MUSB_POWER_RESUME; 102 musb_writeb(mbase, MUSB_POWER, power); 103 104 dev_dbg(musb->controller, "Root port resuming, power %02x\n", power); 105 106 /* later, GetPortStatus will stop RESUME signaling */ 107 musb->port1_status |= MUSB_PORT_STAT_RESUME; 108 musb->rh_timer = jiffies + msecs_to_jiffies(20); 109 } 110 } 111 112 static void musb_port_reset(struct musb *musb, bool do_reset) 113 { 114 u8 power; 115 void __iomem *mbase = musb->mregs; 116 117 if (musb->xceiv->state == OTG_STATE_B_IDLE) { 118 dev_dbg(musb->controller, "HNP: Returning from HNP; no hub reset from b_idle\n"); 119 musb->port1_status &= ~USB_PORT_STAT_RESET; 120 return; 121 } 122 123 if (!is_host_active(musb)) 124 return; 125 126 /* NOTE: caller guarantees it will turn off the reset when 127 * the appropriate amount of time has passed 128 */ 129 power = musb_readb(mbase, MUSB_POWER); 130 if (do_reset) { 131 132 /* 133 * If RESUME is set, we must make sure it stays minimum 20 ms. 134 * Then we must clear RESUME and wait a bit to let musb start 135 * generating SOFs. If we don't do this, OPT HS A 6.8 tests 136 * fail with "Error! Did not receive an SOF before suspend 137 * detected". 138 */ 139 if (power & MUSB_POWER_RESUME) { 140 while (time_before(jiffies, musb->rh_timer)) 141 msleep(1); 142 musb_writeb(mbase, MUSB_POWER, 143 power & ~MUSB_POWER_RESUME); 144 msleep(1); 145 } 146 147 power &= 0xf0; 148 musb_writeb(mbase, MUSB_POWER, 149 power | MUSB_POWER_RESET); 150 151 musb->port1_status |= USB_PORT_STAT_RESET; 152 musb->port1_status &= ~USB_PORT_STAT_ENABLE; 153 musb->rh_timer = jiffies + msecs_to_jiffies(50); 154 } else { 155 dev_dbg(musb->controller, "root port reset stopped\n"); 156 musb_writeb(mbase, MUSB_POWER, 157 power & ~MUSB_POWER_RESET); 158 159 power = musb_readb(mbase, MUSB_POWER); 160 if (power & MUSB_POWER_HSMODE) { 161 dev_dbg(musb->controller, "high-speed device connected\n"); 162 musb->port1_status |= USB_PORT_STAT_HIGH_SPEED; 163 } 164 165 musb->port1_status &= ~USB_PORT_STAT_RESET; 166 musb->port1_status |= USB_PORT_STAT_ENABLE 167 | (USB_PORT_STAT_C_RESET << 16) 168 | (USB_PORT_STAT_C_ENABLE << 16); 169 usb_hcd_poll_rh_status(musb->hcd); 170 171 musb->vbuserr_retry = VBUSERR_RETRY_COUNT; 172 } 173 } 174 175 void musb_root_disconnect(struct musb *musb) 176 { 177 struct usb_otg *otg = musb->xceiv->otg; 178 179 musb->port1_status = USB_PORT_STAT_POWER 180 | (USB_PORT_STAT_C_CONNECTION << 16); 181 182 usb_hcd_poll_rh_status(musb->hcd); 183 musb->is_active = 0; 184 185 switch (musb->xceiv->state) { 186 case OTG_STATE_A_SUSPEND: 187 if (otg->host->b_hnp_enable) { 188 musb->xceiv->state = OTG_STATE_A_PERIPHERAL; 189 musb->g.is_a_peripheral = 1; 190 break; 191 } 192 /* FALLTHROUGH */ 193 case OTG_STATE_A_HOST: 194 musb->xceiv->state = OTG_STATE_A_WAIT_BCON; 195 musb->is_active = 0; 196 break; 197 case OTG_STATE_A_WAIT_VFALL: 198 musb->xceiv->state = OTG_STATE_B_IDLE; 199 break; 200 default: 201 dev_dbg(musb->controller, "host disconnect (%s)\n", 202 usb_otg_state_string(musb->xceiv->state)); 203 } 204 } 205 206 207 /*---------------------------------------------------------------------*/ 208 209 /* Caller may or may not hold musb->lock */ 210 int musb_hub_status_data(struct usb_hcd *hcd, char *buf) 211 { 212 struct musb *musb = hcd_to_musb(hcd); 213 int retval = 0; 214 215 /* called in_irq() via usb_hcd_poll_rh_status() */ 216 if (musb->port1_status & 0xffff0000) { 217 *buf = 0x02; 218 retval = 1; 219 } 220 return retval; 221 } 222 223 int musb_hub_control( 224 struct usb_hcd *hcd, 225 u16 typeReq, 226 u16 wValue, 227 u16 wIndex, 228 char *buf, 229 u16 wLength) 230 { 231 struct musb *musb = hcd_to_musb(hcd); 232 u32 temp; 233 int retval = 0; 234 unsigned long flags; 235 236 spin_lock_irqsave(&musb->lock, flags); 237 238 if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { 239 spin_unlock_irqrestore(&musb->lock, flags); 240 return -ESHUTDOWN; 241 } 242 243 /* hub features: always zero, setting is a NOP 244 * port features: reported, sometimes updated when host is active 245 * no indicators 246 */ 247 switch (typeReq) { 248 case ClearHubFeature: 249 case SetHubFeature: 250 switch (wValue) { 251 case C_HUB_OVER_CURRENT: 252 case C_HUB_LOCAL_POWER: 253 break; 254 default: 255 goto error; 256 } 257 break; 258 case ClearPortFeature: 259 if ((wIndex & 0xff) != 1) 260 goto error; 261 262 switch (wValue) { 263 case USB_PORT_FEAT_ENABLE: 264 break; 265 case USB_PORT_FEAT_SUSPEND: 266 musb_port_suspend(musb, false); 267 break; 268 case USB_PORT_FEAT_POWER: 269 if (!hcd->self.is_b_host) 270 musb_platform_set_vbus(musb, 0); 271 break; 272 case USB_PORT_FEAT_C_CONNECTION: 273 case USB_PORT_FEAT_C_ENABLE: 274 case USB_PORT_FEAT_C_OVER_CURRENT: 275 case USB_PORT_FEAT_C_RESET: 276 case USB_PORT_FEAT_C_SUSPEND: 277 break; 278 default: 279 goto error; 280 } 281 dev_dbg(musb->controller, "clear feature %d\n", wValue); 282 musb->port1_status &= ~(1 << wValue); 283 break; 284 case GetHubDescriptor: 285 { 286 struct usb_hub_descriptor *desc = (void *)buf; 287 288 desc->bDescLength = 9; 289 desc->bDescriptorType = 0x29; 290 desc->bNbrPorts = 1; 291 desc->wHubCharacteristics = cpu_to_le16( 292 0x0001 /* per-port power switching */ 293 | 0x0010 /* no overcurrent reporting */ 294 ); 295 desc->bPwrOn2PwrGood = 5; /* msec/2 */ 296 desc->bHubContrCurrent = 0; 297 298 /* workaround bogus struct definition */ 299 desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ 300 desc->u.hs.DeviceRemovable[1] = 0xff; 301 } 302 break; 303 case GetHubStatus: 304 temp = 0; 305 *(__le32 *) buf = cpu_to_le32(temp); 306 break; 307 case GetPortStatus: 308 if (wIndex != 1) 309 goto error; 310 311 /* finish RESET signaling? */ 312 if ((musb->port1_status & USB_PORT_STAT_RESET) 313 && time_after_eq(jiffies, musb->rh_timer)) 314 musb_port_reset(musb, false); 315 316 /* finish RESUME signaling? */ 317 if ((musb->port1_status & MUSB_PORT_STAT_RESUME) 318 && time_after_eq(jiffies, musb->rh_timer)) { 319 u8 power; 320 321 power = musb_readb(musb->mregs, MUSB_POWER); 322 power &= ~MUSB_POWER_RESUME; 323 dev_dbg(musb->controller, "root port resume stopped, power %02x\n", 324 power); 325 musb_writeb(musb->mregs, MUSB_POWER, power); 326 327 /* ISSUE: DaVinci (RTL 1.300) disconnects after 328 * resume of high speed peripherals (but not full 329 * speed ones). 330 */ 331 332 musb->is_active = 1; 333 musb->port1_status &= ~(USB_PORT_STAT_SUSPEND 334 | MUSB_PORT_STAT_RESUME); 335 musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; 336 usb_hcd_poll_rh_status(musb->hcd); 337 /* NOTE: it might really be A_WAIT_BCON ... */ 338 musb->xceiv->state = OTG_STATE_A_HOST; 339 } 340 341 put_unaligned(cpu_to_le32(musb->port1_status 342 & ~MUSB_PORT_STAT_RESUME), 343 (__le32 *) buf); 344 345 /* port change status is more interesting */ 346 dev_dbg(musb->controller, "port status %08x\n", 347 musb->port1_status); 348 break; 349 case SetPortFeature: 350 if ((wIndex & 0xff) != 1) 351 goto error; 352 353 switch (wValue) { 354 case USB_PORT_FEAT_POWER: 355 /* NOTE: this controller has a strange state machine 356 * that involves "requesting sessions" according to 357 * magic side effects from incompletely-described 358 * rules about startup... 359 * 360 * This call is what really starts the host mode; be 361 * very careful about side effects if you reorder any 362 * initialization logic, e.g. for OTG, or change any 363 * logic relating to VBUS power-up. 364 */ 365 if (!hcd->self.is_b_host) 366 musb_start(musb); 367 break; 368 case USB_PORT_FEAT_RESET: 369 musb_port_reset(musb, true); 370 break; 371 case USB_PORT_FEAT_SUSPEND: 372 musb_port_suspend(musb, true); 373 break; 374 case USB_PORT_FEAT_TEST: 375 if (unlikely(is_host_active(musb))) 376 goto error; 377 378 wIndex >>= 8; 379 switch (wIndex) { 380 case 1: 381 pr_debug("TEST_J\n"); 382 temp = MUSB_TEST_J; 383 break; 384 case 2: 385 pr_debug("TEST_K\n"); 386 temp = MUSB_TEST_K; 387 break; 388 case 3: 389 pr_debug("TEST_SE0_NAK\n"); 390 temp = MUSB_TEST_SE0_NAK; 391 break; 392 case 4: 393 pr_debug("TEST_PACKET\n"); 394 temp = MUSB_TEST_PACKET; 395 musb_load_testpacket(musb); 396 break; 397 case 5: 398 pr_debug("TEST_FORCE_ENABLE\n"); 399 temp = MUSB_TEST_FORCE_HOST 400 | MUSB_TEST_FORCE_HS; 401 402 musb_writeb(musb->mregs, MUSB_DEVCTL, 403 MUSB_DEVCTL_SESSION); 404 break; 405 case 6: 406 pr_debug("TEST_FIFO_ACCESS\n"); 407 temp = MUSB_TEST_FIFO_ACCESS; 408 break; 409 default: 410 goto error; 411 } 412 musb_writeb(musb->mregs, MUSB_TESTMODE, temp); 413 break; 414 default: 415 goto error; 416 } 417 dev_dbg(musb->controller, "set feature %d\n", wValue); 418 musb->port1_status |= 1 << wValue; 419 break; 420 421 default: 422 error: 423 /* "protocol stall" on error */ 424 retval = -EPIPE; 425 } 426 spin_unlock_irqrestore(&musb->lock, flags); 427 return retval; 428 } 429