1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * MUSB OTG driver peripheral support 4 * 5 * Copyright 2005 Mentor Graphics Corporation 6 * Copyright (C) 2005-2006 by Texas Instruments 7 * Copyright (C) 2006-2007 Nokia Corporation 8 * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/list.h> 13 #include <linux/timer.h> 14 #include <linux/module.h> 15 #include <linux/smp.h> 16 #include <linux/spinlock.h> 17 #include <linux/delay.h> 18 #include <linux/dma-mapping.h> 19 #include <linux/slab.h> 20 21 #include "musb_core.h" 22 #include "musb_trace.h" 23 24 25 /* ----------------------------------------------------------------------- */ 26 27 #define is_buffer_mapped(req) (is_dma_capable() && \ 28 (req->map_state != UN_MAPPED)) 29 30 /* Maps the buffer to dma */ 31 32 static inline void map_dma_buffer(struct musb_request *request, 33 struct musb *musb, struct musb_ep *musb_ep) 34 { 35 int compatible = true; 36 struct dma_controller *dma = musb->dma_controller; 37 38 request->map_state = UN_MAPPED; 39 40 if (!is_dma_capable() || !musb_ep->dma) 41 return; 42 43 /* Check if DMA engine can handle this request. 44 * DMA code must reject the USB request explicitly. 45 * Default behaviour is to map the request. 46 */ 47 if (dma->is_compatible) 48 compatible = dma->is_compatible(musb_ep->dma, 49 musb_ep->packet_sz, request->request.buf, 50 request->request.length); 51 if (!compatible) 52 return; 53 54 if (request->request.dma == DMA_ADDR_INVALID) { 55 dma_addr_t dma_addr; 56 int ret; 57 58 dma_addr = dma_map_single( 59 musb->controller, 60 request->request.buf, 61 request->request.length, 62 request->tx 63 ? DMA_TO_DEVICE 64 : DMA_FROM_DEVICE); 65 ret = dma_mapping_error(musb->controller, dma_addr); 66 if (ret) 67 return; 68 69 request->request.dma = dma_addr; 70 request->map_state = MUSB_MAPPED; 71 } else { 72 dma_sync_single_for_device(musb->controller, 73 request->request.dma, 74 request->request.length, 75 request->tx 76 ? DMA_TO_DEVICE 77 : DMA_FROM_DEVICE); 78 request->map_state = PRE_MAPPED; 79 } 80 } 81 82 /* Unmap the buffer from dma and maps it back to cpu */ 83 static inline void unmap_dma_buffer(struct musb_request *request, 84 struct musb *musb) 85 { 86 struct musb_ep *musb_ep = request->ep; 87 88 if (!is_buffer_mapped(request) || !musb_ep->dma) 89 return; 90 91 if (request->request.dma == DMA_ADDR_INVALID) { 92 dev_vdbg(musb->controller, 93 "not unmapping a never mapped buffer\n"); 94 return; 95 } 96 if (request->map_state == MUSB_MAPPED) { 97 dma_unmap_single(musb->controller, 98 request->request.dma, 99 request->request.length, 100 request->tx 101 ? DMA_TO_DEVICE 102 : DMA_FROM_DEVICE); 103 request->request.dma = DMA_ADDR_INVALID; 104 } else { /* PRE_MAPPED */ 105 dma_sync_single_for_cpu(musb->controller, 106 request->request.dma, 107 request->request.length, 108 request->tx 109 ? DMA_TO_DEVICE 110 : DMA_FROM_DEVICE); 111 } 112 request->map_state = UN_MAPPED; 113 } 114 115 /* 116 * Immediately complete a request. 117 * 118 * @param request the request to complete 119 * @param status the status to complete the request with 120 * Context: controller locked, IRQs blocked. 121 */ 122 void musb_g_giveback( 123 struct musb_ep *ep, 124 struct usb_request *request, 125 int status) 126 __releases(ep->musb->lock) 127 __acquires(ep->musb->lock) 128 { 129 struct musb_request *req; 130 struct musb *musb; 131 int busy = ep->busy; 132 133 req = to_musb_request(request); 134 135 list_del(&req->list); 136 if (req->request.status == -EINPROGRESS) 137 req->request.status = status; 138 musb = req->musb; 139 140 ep->busy = 1; 141 spin_unlock(&musb->lock); 142 143 if (!dma_mapping_error(&musb->g.dev, request->dma)) 144 unmap_dma_buffer(req, musb); 145 146 trace_musb_req_gb(req); 147 usb_gadget_giveback_request(&req->ep->end_point, &req->request); 148 spin_lock(&musb->lock); 149 ep->busy = busy; 150 } 151 152 /* ----------------------------------------------------------------------- */ 153 154 /* 155 * Abort requests queued to an endpoint using the status. Synchronous. 156 * caller locked controller and blocked irqs, and selected this ep. 157 */ 158 static void nuke(struct musb_ep *ep, const int status) 159 { 160 struct musb *musb = ep->musb; 161 struct musb_request *req = NULL; 162 void __iomem *epio = ep->musb->endpoints[ep->current_epnum].regs; 163 164 ep->busy = 1; 165 166 if (is_dma_capable() && ep->dma) { 167 struct dma_controller *c = ep->musb->dma_controller; 168 int value; 169 170 if (ep->is_in) { 171 /* 172 * The programming guide says that we must not clear 173 * the DMAMODE bit before DMAENAB, so we only 174 * clear it in the second write... 175 */ 176 musb_writew(epio, MUSB_TXCSR, 177 MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); 178 musb_writew(epio, MUSB_TXCSR, 179 0 | MUSB_TXCSR_FLUSHFIFO); 180 } else { 181 musb_writew(epio, MUSB_RXCSR, 182 0 | MUSB_RXCSR_FLUSHFIFO); 183 musb_writew(epio, MUSB_RXCSR, 184 0 | MUSB_RXCSR_FLUSHFIFO); 185 } 186 187 value = c->channel_abort(ep->dma); 188 musb_dbg(musb, "%s: abort DMA --> %d", ep->name, value); 189 c->channel_release(ep->dma); 190 ep->dma = NULL; 191 } 192 193 while (!list_empty(&ep->req_list)) { 194 req = list_first_entry(&ep->req_list, struct musb_request, list); 195 musb_g_giveback(ep, &req->request, status); 196 } 197 } 198 199 /* ----------------------------------------------------------------------- */ 200 201 /* Data transfers - pure PIO, pure DMA, or mixed mode */ 202 203 /* 204 * This assumes the separate CPPI engine is responding to DMA requests 205 * from the usb core ... sequenced a bit differently from mentor dma. 206 */ 207 208 static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) 209 { 210 if (can_bulk_split(musb, ep->type)) 211 return ep->hw_ep->max_packet_sz_tx; 212 else 213 return ep->packet_sz; 214 } 215 216 /* 217 * An endpoint is transmitting data. This can be called either from 218 * the IRQ routine or from ep.queue() to kickstart a request on an 219 * endpoint. 220 * 221 * Context: controller locked, IRQs blocked, endpoint selected 222 */ 223 static void txstate(struct musb *musb, struct musb_request *req) 224 { 225 u8 epnum = req->epnum; 226 struct musb_ep *musb_ep; 227 void __iomem *epio = musb->endpoints[epnum].regs; 228 struct usb_request *request; 229 u16 fifo_count = 0, csr; 230 int use_dma = 0; 231 232 musb_ep = req->ep; 233 234 /* Check if EP is disabled */ 235 if (!musb_ep->desc) { 236 musb_dbg(musb, "ep:%s disabled - ignore request", 237 musb_ep->end_point.name); 238 return; 239 } 240 241 /* we shouldn't get here while DMA is active ... but we do ... */ 242 if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { 243 musb_dbg(musb, "dma pending..."); 244 return; 245 } 246 247 /* read TXCSR before */ 248 csr = musb_readw(epio, MUSB_TXCSR); 249 250 request = &req->request; 251 fifo_count = min(max_ep_writesize(musb, musb_ep), 252 (int)(request->length - request->actual)); 253 254 if (csr & MUSB_TXCSR_TXPKTRDY) { 255 musb_dbg(musb, "%s old packet still ready , txcsr %03x", 256 musb_ep->end_point.name, csr); 257 return; 258 } 259 260 if (csr & MUSB_TXCSR_P_SENDSTALL) { 261 musb_dbg(musb, "%s stalling, txcsr %03x", 262 musb_ep->end_point.name, csr); 263 return; 264 } 265 266 musb_dbg(musb, "hw_ep%d, maxpacket %d, fifo count %d, txcsr %03x", 267 epnum, musb_ep->packet_sz, fifo_count, 268 csr); 269 270 #ifndef CONFIG_MUSB_PIO_ONLY 271 if (is_buffer_mapped(req)) { 272 struct dma_controller *c = musb->dma_controller; 273 size_t request_size; 274 275 /* setup DMA, then program endpoint CSR */ 276 request_size = min_t(size_t, request->length - request->actual, 277 musb_ep->dma->max_len); 278 279 use_dma = (request->dma != DMA_ADDR_INVALID && request_size); 280 281 /* MUSB_TXCSR_P_ISO is still set correctly */ 282 283 if (musb_dma_inventra(musb) || musb_dma_ux500(musb)) { 284 if (request_size < musb_ep->packet_sz) 285 musb_ep->dma->desired_mode = 0; 286 else 287 musb_ep->dma->desired_mode = 1; 288 289 use_dma = use_dma && c->channel_program( 290 musb_ep->dma, musb_ep->packet_sz, 291 musb_ep->dma->desired_mode, 292 request->dma + request->actual, request_size); 293 if (use_dma) { 294 if (musb_ep->dma->desired_mode == 0) { 295 /* 296 * We must not clear the DMAMODE bit 297 * before the DMAENAB bit -- and the 298 * latter doesn't always get cleared 299 * before we get here... 300 */ 301 csr &= ~(MUSB_TXCSR_AUTOSET 302 | MUSB_TXCSR_DMAENAB); 303 musb_writew(epio, MUSB_TXCSR, csr 304 | MUSB_TXCSR_P_WZC_BITS); 305 csr &= ~MUSB_TXCSR_DMAMODE; 306 csr |= (MUSB_TXCSR_DMAENAB | 307 MUSB_TXCSR_MODE); 308 /* against programming guide */ 309 } else { 310 csr |= (MUSB_TXCSR_DMAENAB 311 | MUSB_TXCSR_DMAMODE 312 | MUSB_TXCSR_MODE); 313 /* 314 * Enable Autoset according to table 315 * below 316 * bulk_split hb_mult Autoset_Enable 317 * 0 0 Yes(Normal) 318 * 0 >0 No(High BW ISO) 319 * 1 0 Yes(HS bulk) 320 * 1 >0 Yes(FS bulk) 321 */ 322 if (!musb_ep->hb_mult || 323 can_bulk_split(musb, 324 musb_ep->type)) 325 csr |= MUSB_TXCSR_AUTOSET; 326 } 327 csr &= ~MUSB_TXCSR_P_UNDERRUN; 328 329 musb_writew(epio, MUSB_TXCSR, csr); 330 } 331 } 332 333 if (is_cppi_enabled(musb)) { 334 /* program endpoint CSR first, then setup DMA */ 335 csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); 336 csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | 337 MUSB_TXCSR_MODE; 338 musb_writew(epio, MUSB_TXCSR, (MUSB_TXCSR_P_WZC_BITS & 339 ~MUSB_TXCSR_P_UNDERRUN) | csr); 340 341 /* ensure writebuffer is empty */ 342 csr = musb_readw(epio, MUSB_TXCSR); 343 344 /* 345 * NOTE host side sets DMAENAB later than this; both are 346 * OK since the transfer dma glue (between CPPI and 347 * Mentor fifos) just tells CPPI it could start. Data 348 * only moves to the USB TX fifo when both fifos are 349 * ready. 350 */ 351 /* 352 * "mode" is irrelevant here; handle terminating ZLPs 353 * like PIO does, since the hardware RNDIS mode seems 354 * unreliable except for the 355 * last-packet-is-already-short case. 356 */ 357 use_dma = use_dma && c->channel_program( 358 musb_ep->dma, musb_ep->packet_sz, 359 0, 360 request->dma + request->actual, 361 request_size); 362 if (!use_dma) { 363 c->channel_release(musb_ep->dma); 364 musb_ep->dma = NULL; 365 csr &= ~MUSB_TXCSR_DMAENAB; 366 musb_writew(epio, MUSB_TXCSR, csr); 367 /* invariant: prequest->buf is non-null */ 368 } 369 } else if (tusb_dma_omap(musb)) 370 use_dma = use_dma && c->channel_program( 371 musb_ep->dma, musb_ep->packet_sz, 372 request->zero, 373 request->dma + request->actual, 374 request_size); 375 } 376 #endif 377 378 if (!use_dma) { 379 /* 380 * Unmap the dma buffer back to cpu if dma channel 381 * programming fails 382 */ 383 unmap_dma_buffer(req, musb); 384 385 musb_write_fifo(musb_ep->hw_ep, fifo_count, 386 (u8 *) (request->buf + request->actual)); 387 request->actual += fifo_count; 388 csr |= MUSB_TXCSR_TXPKTRDY; 389 csr &= ~MUSB_TXCSR_P_UNDERRUN; 390 musb_writew(epio, MUSB_TXCSR, csr); 391 } 392 393 /* host may already have the data when this message shows... */ 394 musb_dbg(musb, "%s TX/IN %s len %d/%d, txcsr %04x, fifo %d/%d", 395 musb_ep->end_point.name, use_dma ? "dma" : "pio", 396 request->actual, request->length, 397 musb_readw(epio, MUSB_TXCSR), 398 fifo_count, 399 musb_readw(epio, MUSB_TXMAXP)); 400 } 401 402 /* 403 * FIFO state update (e.g. data ready). 404 * Called from IRQ, with controller locked. 405 */ 406 void musb_g_tx(struct musb *musb, u8 epnum) 407 { 408 u16 csr; 409 struct musb_request *req; 410 struct usb_request *request; 411 u8 __iomem *mbase = musb->mregs; 412 struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_in; 413 void __iomem *epio = musb->endpoints[epnum].regs; 414 struct dma_channel *dma; 415 416 musb_ep_select(mbase, epnum); 417 req = next_request(musb_ep); 418 request = &req->request; 419 420 csr = musb_readw(epio, MUSB_TXCSR); 421 musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr); 422 423 dma = is_dma_capable() ? musb_ep->dma : NULL; 424 425 /* 426 * REVISIT: for high bandwidth, MUSB_TXCSR_P_INCOMPTX 427 * probably rates reporting as a host error. 428 */ 429 if (csr & MUSB_TXCSR_P_SENTSTALL) { 430 csr |= MUSB_TXCSR_P_WZC_BITS; 431 csr &= ~MUSB_TXCSR_P_SENTSTALL; 432 musb_writew(epio, MUSB_TXCSR, csr); 433 return; 434 } 435 436 if (csr & MUSB_TXCSR_P_UNDERRUN) { 437 /* We NAKed, no big deal... little reason to care. */ 438 csr |= MUSB_TXCSR_P_WZC_BITS; 439 csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); 440 musb_writew(epio, MUSB_TXCSR, csr); 441 dev_vdbg(musb->controller, "underrun on ep%d, req %p\n", 442 epnum, request); 443 } 444 445 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { 446 /* 447 * SHOULD NOT HAPPEN... has with CPPI though, after 448 * changing SENDSTALL (and other cases); harmless? 449 */ 450 musb_dbg(musb, "%s dma still busy?", musb_ep->end_point.name); 451 return; 452 } 453 454 if (req) { 455 456 trace_musb_req_tx(req); 457 458 if (dma && (csr & MUSB_TXCSR_DMAENAB)) { 459 csr |= MUSB_TXCSR_P_WZC_BITS; 460 csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN | 461 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET); 462 musb_writew(epio, MUSB_TXCSR, csr); 463 /* Ensure writebuffer is empty. */ 464 csr = musb_readw(epio, MUSB_TXCSR); 465 request->actual += musb_ep->dma->actual_len; 466 musb_dbg(musb, "TXCSR%d %04x, DMA off, len %zu, req %p", 467 epnum, csr, musb_ep->dma->actual_len, request); 468 } 469 470 /* 471 * First, maybe a terminating short packet. Some DMA 472 * engines might handle this by themselves. 473 */ 474 if ((request->zero && request->length) 475 && (request->length % musb_ep->packet_sz == 0) 476 && (request->actual == request->length)) { 477 478 /* 479 * On DMA completion, FIFO may not be 480 * available yet... 481 */ 482 if (csr & MUSB_TXCSR_TXPKTRDY) 483 return; 484 485 musb_writew(epio, MUSB_TXCSR, MUSB_TXCSR_MODE 486 | MUSB_TXCSR_TXPKTRDY); 487 request->zero = 0; 488 } 489 490 if (request->actual == request->length) { 491 musb_g_giveback(musb_ep, request, 0); 492 /* 493 * In the giveback function the MUSB lock is 494 * released and acquired after sometime. During 495 * this time period the INDEX register could get 496 * changed by the gadget_queue function especially 497 * on SMP systems. Reselect the INDEX to be sure 498 * we are reading/modifying the right registers 499 */ 500 musb_ep_select(mbase, epnum); 501 req = musb_ep->desc ? next_request(musb_ep) : NULL; 502 if (!req) { 503 musb_dbg(musb, "%s idle now", 504 musb_ep->end_point.name); 505 return; 506 } 507 } 508 509 txstate(musb, req); 510 } 511 } 512 513 /* ------------------------------------------------------------ */ 514 515 /* 516 * Context: controller locked, IRQs blocked, endpoint selected 517 */ 518 static void rxstate(struct musb *musb, struct musb_request *req) 519 { 520 const u8 epnum = req->epnum; 521 struct usb_request *request = &req->request; 522 struct musb_ep *musb_ep; 523 void __iomem *epio = musb->endpoints[epnum].regs; 524 unsigned len = 0; 525 u16 fifo_count; 526 u16 csr = musb_readw(epio, MUSB_RXCSR); 527 struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; 528 u8 use_mode_1; 529 530 if (hw_ep->is_shared_fifo) 531 musb_ep = &hw_ep->ep_in; 532 else 533 musb_ep = &hw_ep->ep_out; 534 535 fifo_count = musb_ep->packet_sz; 536 537 /* Check if EP is disabled */ 538 if (!musb_ep->desc) { 539 musb_dbg(musb, "ep:%s disabled - ignore request", 540 musb_ep->end_point.name); 541 return; 542 } 543 544 /* We shouldn't get here while DMA is active, but we do... */ 545 if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { 546 musb_dbg(musb, "DMA pending..."); 547 return; 548 } 549 550 if (csr & MUSB_RXCSR_P_SENDSTALL) { 551 musb_dbg(musb, "%s stalling, RXCSR %04x", 552 musb_ep->end_point.name, csr); 553 return; 554 } 555 556 if (is_cppi_enabled(musb) && is_buffer_mapped(req)) { 557 struct dma_controller *c = musb->dma_controller; 558 struct dma_channel *channel = musb_ep->dma; 559 560 /* NOTE: CPPI won't actually stop advancing the DMA 561 * queue after short packet transfers, so this is almost 562 * always going to run as IRQ-per-packet DMA so that 563 * faults will be handled correctly. 564 */ 565 if (c->channel_program(channel, 566 musb_ep->packet_sz, 567 !request->short_not_ok, 568 request->dma + request->actual, 569 request->length - request->actual)) { 570 571 /* make sure that if an rxpkt arrived after the irq, 572 * the cppi engine will be ready to take it as soon 573 * as DMA is enabled 574 */ 575 csr &= ~(MUSB_RXCSR_AUTOCLEAR 576 | MUSB_RXCSR_DMAMODE); 577 csr |= MUSB_RXCSR_DMAENAB | MUSB_RXCSR_P_WZC_BITS; 578 musb_writew(epio, MUSB_RXCSR, csr); 579 return; 580 } 581 } 582 583 if (csr & MUSB_RXCSR_RXPKTRDY) { 584 fifo_count = musb_readw(epio, MUSB_RXCOUNT); 585 586 /* 587 * Enable Mode 1 on RX transfers only when short_not_ok flag 588 * is set. Currently short_not_ok flag is set only from 589 * file_storage and f_mass_storage drivers 590 */ 591 592 if (request->short_not_ok && fifo_count == musb_ep->packet_sz) 593 use_mode_1 = 1; 594 else 595 use_mode_1 = 0; 596 597 if (request->actual < request->length) { 598 if (!is_buffer_mapped(req)) 599 goto buffer_aint_mapped; 600 601 if (musb_dma_inventra(musb)) { 602 struct dma_controller *c; 603 struct dma_channel *channel; 604 int use_dma = 0; 605 unsigned int transfer_size; 606 607 c = musb->dma_controller; 608 channel = musb_ep->dma; 609 610 /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in 611 * mode 0 only. So we do not get endpoint interrupts due to DMA 612 * completion. We only get interrupts from DMA controller. 613 * 614 * We could operate in DMA mode 1 if we knew the size of the transfer 615 * in advance. For mass storage class, request->length = what the host 616 * sends, so that'd work. But for pretty much everything else, 617 * request->length is routinely more than what the host sends. For 618 * most these gadgets, end of is signified either by a short packet, 619 * or filling the last byte of the buffer. (Sending extra data in 620 * that last pckate should trigger an overflow fault.) But in mode 1, 621 * we don't get DMA completion interrupt for short packets. 622 * 623 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), 624 * to get endpoint interrupt on every DMA req, but that didn't seem 625 * to work reliably. 626 * 627 * REVISIT an updated g_file_storage can set req->short_not_ok, which 628 * then becomes usable as a runtime "use mode 1" hint... 629 */ 630 631 /* Experimental: Mode1 works with mass storage use cases */ 632 if (use_mode_1) { 633 csr |= MUSB_RXCSR_AUTOCLEAR; 634 musb_writew(epio, MUSB_RXCSR, csr); 635 csr |= MUSB_RXCSR_DMAENAB; 636 musb_writew(epio, MUSB_RXCSR, csr); 637 638 /* 639 * this special sequence (enabling and then 640 * disabling MUSB_RXCSR_DMAMODE) is required 641 * to get DMAReq to activate 642 */ 643 musb_writew(epio, MUSB_RXCSR, 644 csr | MUSB_RXCSR_DMAMODE); 645 musb_writew(epio, MUSB_RXCSR, csr); 646 647 transfer_size = min_t(unsigned int, 648 request->length - 649 request->actual, 650 channel->max_len); 651 musb_ep->dma->desired_mode = 1; 652 } else { 653 if (!musb_ep->hb_mult && 654 musb_ep->hw_ep->rx_double_buffered) 655 csr |= MUSB_RXCSR_AUTOCLEAR; 656 csr |= MUSB_RXCSR_DMAENAB; 657 musb_writew(epio, MUSB_RXCSR, csr); 658 659 transfer_size = min(request->length - request->actual, 660 (unsigned)fifo_count); 661 musb_ep->dma->desired_mode = 0; 662 } 663 664 use_dma = c->channel_program( 665 channel, 666 musb_ep->packet_sz, 667 channel->desired_mode, 668 request->dma 669 + request->actual, 670 transfer_size); 671 672 if (use_dma) 673 return; 674 } 675 676 if ((musb_dma_ux500(musb)) && 677 (request->actual < request->length)) { 678 679 struct dma_controller *c; 680 struct dma_channel *channel; 681 unsigned int transfer_size = 0; 682 683 c = musb->dma_controller; 684 channel = musb_ep->dma; 685 686 /* In case first packet is short */ 687 if (fifo_count < musb_ep->packet_sz) 688 transfer_size = fifo_count; 689 else if (request->short_not_ok) 690 transfer_size = min_t(unsigned int, 691 request->length - 692 request->actual, 693 channel->max_len); 694 else 695 transfer_size = min_t(unsigned int, 696 request->length - 697 request->actual, 698 (unsigned)fifo_count); 699 700 csr &= ~MUSB_RXCSR_DMAMODE; 701 csr |= (MUSB_RXCSR_DMAENAB | 702 MUSB_RXCSR_AUTOCLEAR); 703 704 musb_writew(epio, MUSB_RXCSR, csr); 705 706 if (transfer_size <= musb_ep->packet_sz) { 707 musb_ep->dma->desired_mode = 0; 708 } else { 709 musb_ep->dma->desired_mode = 1; 710 /* Mode must be set after DMAENAB */ 711 csr |= MUSB_RXCSR_DMAMODE; 712 musb_writew(epio, MUSB_RXCSR, csr); 713 } 714 715 if (c->channel_program(channel, 716 musb_ep->packet_sz, 717 channel->desired_mode, 718 request->dma 719 + request->actual, 720 transfer_size)) 721 722 return; 723 } 724 725 len = request->length - request->actual; 726 musb_dbg(musb, "%s OUT/RX pio fifo %d/%d, maxpacket %d", 727 musb_ep->end_point.name, 728 fifo_count, len, 729 musb_ep->packet_sz); 730 731 fifo_count = min_t(unsigned, len, fifo_count); 732 733 if (tusb_dma_omap(musb)) { 734 struct dma_controller *c = musb->dma_controller; 735 struct dma_channel *channel = musb_ep->dma; 736 u32 dma_addr = request->dma + request->actual; 737 int ret; 738 739 ret = c->channel_program(channel, 740 musb_ep->packet_sz, 741 channel->desired_mode, 742 dma_addr, 743 fifo_count); 744 if (ret) 745 return; 746 } 747 748 /* 749 * Unmap the dma buffer back to cpu if dma channel 750 * programming fails. This buffer is mapped if the 751 * channel allocation is successful 752 */ 753 unmap_dma_buffer(req, musb); 754 755 /* 756 * Clear DMAENAB and AUTOCLEAR for the 757 * PIO mode transfer 758 */ 759 csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR); 760 musb_writew(epio, MUSB_RXCSR, csr); 761 762 buffer_aint_mapped: 763 fifo_count = min_t(unsigned int, 764 request->length - request->actual, 765 (unsigned int)fifo_count); 766 musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) 767 (request->buf + request->actual)); 768 request->actual += fifo_count; 769 770 /* REVISIT if we left anything in the fifo, flush 771 * it and report -EOVERFLOW 772 */ 773 774 /* ack the read! */ 775 csr |= MUSB_RXCSR_P_WZC_BITS; 776 csr &= ~MUSB_RXCSR_RXPKTRDY; 777 musb_writew(epio, MUSB_RXCSR, csr); 778 } 779 } 780 781 /* reach the end or short packet detected */ 782 if (request->actual == request->length || 783 fifo_count < musb_ep->packet_sz) 784 musb_g_giveback(musb_ep, request, 0); 785 } 786 787 /* 788 * Data ready for a request; called from IRQ 789 */ 790 void musb_g_rx(struct musb *musb, u8 epnum) 791 { 792 u16 csr; 793 struct musb_request *req; 794 struct usb_request *request; 795 void __iomem *mbase = musb->mregs; 796 struct musb_ep *musb_ep; 797 void __iomem *epio = musb->endpoints[epnum].regs; 798 struct dma_channel *dma; 799 struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; 800 801 if (hw_ep->is_shared_fifo) 802 musb_ep = &hw_ep->ep_in; 803 else 804 musb_ep = &hw_ep->ep_out; 805 806 musb_ep_select(mbase, epnum); 807 808 req = next_request(musb_ep); 809 if (!req) 810 return; 811 812 trace_musb_req_rx(req); 813 request = &req->request; 814 815 csr = musb_readw(epio, MUSB_RXCSR); 816 dma = is_dma_capable() ? musb_ep->dma : NULL; 817 818 musb_dbg(musb, "<== %s, rxcsr %04x%s %p", musb_ep->end_point.name, 819 csr, dma ? " (dma)" : "", request); 820 821 if (csr & MUSB_RXCSR_P_SENTSTALL) { 822 csr |= MUSB_RXCSR_P_WZC_BITS; 823 csr &= ~MUSB_RXCSR_P_SENTSTALL; 824 musb_writew(epio, MUSB_RXCSR, csr); 825 return; 826 } 827 828 if (csr & MUSB_RXCSR_P_OVERRUN) { 829 /* csr |= MUSB_RXCSR_P_WZC_BITS; */ 830 csr &= ~MUSB_RXCSR_P_OVERRUN; 831 musb_writew(epio, MUSB_RXCSR, csr); 832 833 musb_dbg(musb, "%s iso overrun on %p", musb_ep->name, request); 834 if (request->status == -EINPROGRESS) 835 request->status = -EOVERFLOW; 836 } 837 if (csr & MUSB_RXCSR_INCOMPRX) { 838 /* REVISIT not necessarily an error */ 839 musb_dbg(musb, "%s, incomprx", musb_ep->end_point.name); 840 } 841 842 if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { 843 /* "should not happen"; likely RXPKTRDY pending for DMA */ 844 musb_dbg(musb, "%s busy, csr %04x", 845 musb_ep->end_point.name, csr); 846 return; 847 } 848 849 if (dma && (csr & MUSB_RXCSR_DMAENAB)) { 850 csr &= ~(MUSB_RXCSR_AUTOCLEAR 851 | MUSB_RXCSR_DMAENAB 852 | MUSB_RXCSR_DMAMODE); 853 musb_writew(epio, MUSB_RXCSR, 854 MUSB_RXCSR_P_WZC_BITS | csr); 855 856 request->actual += musb_ep->dma->actual_len; 857 858 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \ 859 defined(CONFIG_USB_UX500_DMA) 860 /* Autoclear doesn't clear RxPktRdy for short packets */ 861 if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered) 862 || (dma->actual_len 863 & (musb_ep->packet_sz - 1))) { 864 /* ack the read! */ 865 csr &= ~MUSB_RXCSR_RXPKTRDY; 866 musb_writew(epio, MUSB_RXCSR, csr); 867 } 868 869 /* incomplete, and not short? wait for next IN packet */ 870 if ((request->actual < request->length) 871 && (musb_ep->dma->actual_len 872 == musb_ep->packet_sz)) { 873 /* In double buffer case, continue to unload fifo if 874 * there is Rx packet in FIFO. 875 **/ 876 csr = musb_readw(epio, MUSB_RXCSR); 877 if ((csr & MUSB_RXCSR_RXPKTRDY) && 878 hw_ep->rx_double_buffered) 879 goto exit; 880 return; 881 } 882 #endif 883 musb_g_giveback(musb_ep, request, 0); 884 /* 885 * In the giveback function the MUSB lock is 886 * released and acquired after sometime. During 887 * this time period the INDEX register could get 888 * changed by the gadget_queue function especially 889 * on SMP systems. Reselect the INDEX to be sure 890 * we are reading/modifying the right registers 891 */ 892 musb_ep_select(mbase, epnum); 893 894 req = next_request(musb_ep); 895 if (!req) 896 return; 897 } 898 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) || \ 899 defined(CONFIG_USB_UX500_DMA) 900 exit: 901 #endif 902 /* Analyze request */ 903 rxstate(musb, req); 904 } 905 906 /* ------------------------------------------------------------ */ 907 908 static int musb_gadget_enable(struct usb_ep *ep, 909 const struct usb_endpoint_descriptor *desc) 910 { 911 unsigned long flags; 912 struct musb_ep *musb_ep; 913 struct musb_hw_ep *hw_ep; 914 void __iomem *regs; 915 struct musb *musb; 916 void __iomem *mbase; 917 u8 epnum; 918 u16 csr; 919 unsigned tmp; 920 int status = -EINVAL; 921 922 if (!ep || !desc) 923 return -EINVAL; 924 925 musb_ep = to_musb_ep(ep); 926 hw_ep = musb_ep->hw_ep; 927 regs = hw_ep->regs; 928 musb = musb_ep->musb; 929 mbase = musb->mregs; 930 epnum = musb_ep->current_epnum; 931 932 spin_lock_irqsave(&musb->lock, flags); 933 934 if (musb_ep->desc) { 935 status = -EBUSY; 936 goto fail; 937 } 938 musb_ep->type = usb_endpoint_type(desc); 939 940 /* check direction and (later) maxpacket size against endpoint */ 941 if (usb_endpoint_num(desc) != epnum) 942 goto fail; 943 944 /* REVISIT this rules out high bandwidth periodic transfers */ 945 tmp = usb_endpoint_maxp_mult(desc) - 1; 946 if (tmp) { 947 int ok; 948 949 if (usb_endpoint_dir_in(desc)) 950 ok = musb->hb_iso_tx; 951 else 952 ok = musb->hb_iso_rx; 953 954 if (!ok) { 955 musb_dbg(musb, "no support for high bandwidth ISO"); 956 goto fail; 957 } 958 musb_ep->hb_mult = tmp; 959 } else { 960 musb_ep->hb_mult = 0; 961 } 962 963 musb_ep->packet_sz = usb_endpoint_maxp(desc); 964 tmp = musb_ep->packet_sz * (musb_ep->hb_mult + 1); 965 966 /* enable the interrupts for the endpoint, set the endpoint 967 * packet size (or fail), set the mode, clear the fifo 968 */ 969 musb_ep_select(mbase, epnum); 970 if (usb_endpoint_dir_in(desc)) { 971 972 if (hw_ep->is_shared_fifo) 973 musb_ep->is_in = 1; 974 if (!musb_ep->is_in) 975 goto fail; 976 977 if (tmp > hw_ep->max_packet_sz_tx) { 978 musb_dbg(musb, "packet size beyond hardware FIFO size"); 979 goto fail; 980 } 981 982 musb->intrtxe |= (1 << epnum); 983 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe); 984 985 /* REVISIT if can_bulk_split(), use by updating "tmp"; 986 * likewise high bandwidth periodic tx 987 */ 988 /* Set TXMAXP with the FIFO size of the endpoint 989 * to disable double buffering mode. 990 */ 991 if (can_bulk_split(musb, musb_ep->type)) 992 musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / 993 musb_ep->packet_sz) - 1; 994 musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz 995 | (musb_ep->hb_mult << 11)); 996 997 csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; 998 if (musb_readw(regs, MUSB_TXCSR) 999 & MUSB_TXCSR_FIFONOTEMPTY) 1000 csr |= MUSB_TXCSR_FLUSHFIFO; 1001 if (musb_ep->type == USB_ENDPOINT_XFER_ISOC) 1002 csr |= MUSB_TXCSR_P_ISO; 1003 1004 /* set twice in case of double buffering */ 1005 musb_writew(regs, MUSB_TXCSR, csr); 1006 /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */ 1007 musb_writew(regs, MUSB_TXCSR, csr); 1008 1009 } else { 1010 1011 if (hw_ep->is_shared_fifo) 1012 musb_ep->is_in = 0; 1013 if (musb_ep->is_in) 1014 goto fail; 1015 1016 if (tmp > hw_ep->max_packet_sz_rx) { 1017 musb_dbg(musb, "packet size beyond hardware FIFO size"); 1018 goto fail; 1019 } 1020 1021 musb->intrrxe |= (1 << epnum); 1022 musb_writew(mbase, MUSB_INTRRXE, musb->intrrxe); 1023 1024 /* REVISIT if can_bulk_combine() use by updating "tmp" 1025 * likewise high bandwidth periodic rx 1026 */ 1027 /* Set RXMAXP with the FIFO size of the endpoint 1028 * to disable double buffering mode. 1029 */ 1030 musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz 1031 | (musb_ep->hb_mult << 11)); 1032 1033 /* force shared fifo to OUT-only mode */ 1034 if (hw_ep->is_shared_fifo) { 1035 csr = musb_readw(regs, MUSB_TXCSR); 1036 csr &= ~(MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY); 1037 musb_writew(regs, MUSB_TXCSR, csr); 1038 } 1039 1040 csr = MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_CLRDATATOG; 1041 if (musb_ep->type == USB_ENDPOINT_XFER_ISOC) 1042 csr |= MUSB_RXCSR_P_ISO; 1043 else if (musb_ep->type == USB_ENDPOINT_XFER_INT) 1044 csr |= MUSB_RXCSR_DISNYET; 1045 1046 /* set twice in case of double buffering */ 1047 musb_writew(regs, MUSB_RXCSR, csr); 1048 musb_writew(regs, MUSB_RXCSR, csr); 1049 } 1050 1051 /* NOTE: all the I/O code _should_ work fine without DMA, in case 1052 * for some reason you run out of channels here. 1053 */ 1054 if (is_dma_capable() && musb->dma_controller) { 1055 struct dma_controller *c = musb->dma_controller; 1056 1057 musb_ep->dma = c->channel_alloc(c, hw_ep, 1058 (desc->bEndpointAddress & USB_DIR_IN)); 1059 } else 1060 musb_ep->dma = NULL; 1061 1062 musb_ep->desc = desc; 1063 musb_ep->busy = 0; 1064 musb_ep->wedged = 0; 1065 status = 0; 1066 1067 pr_debug("%s periph: enabled %s for %s %s, %smaxpacket %d\n", 1068 musb_driver_name, musb_ep->end_point.name, 1069 musb_ep_xfertype_string(musb_ep->type), 1070 musb_ep->is_in ? "IN" : "OUT", 1071 musb_ep->dma ? "dma, " : "", 1072 musb_ep->packet_sz); 1073 1074 schedule_delayed_work(&musb->irq_work, 0); 1075 1076 fail: 1077 spin_unlock_irqrestore(&musb->lock, flags); 1078 return status; 1079 } 1080 1081 /* 1082 * Disable an endpoint flushing all requests queued. 1083 */ 1084 static int musb_gadget_disable(struct usb_ep *ep) 1085 { 1086 unsigned long flags; 1087 struct musb *musb; 1088 u8 epnum; 1089 struct musb_ep *musb_ep; 1090 void __iomem *epio; 1091 1092 musb_ep = to_musb_ep(ep); 1093 musb = musb_ep->musb; 1094 epnum = musb_ep->current_epnum; 1095 epio = musb->endpoints[epnum].regs; 1096 1097 spin_lock_irqsave(&musb->lock, flags); 1098 musb_ep_select(musb->mregs, epnum); 1099 1100 /* zero the endpoint sizes */ 1101 if (musb_ep->is_in) { 1102 musb->intrtxe &= ~(1 << epnum); 1103 musb_writew(musb->mregs, MUSB_INTRTXE, musb->intrtxe); 1104 musb_writew(epio, MUSB_TXMAXP, 0); 1105 } else { 1106 musb->intrrxe &= ~(1 << epnum); 1107 musb_writew(musb->mregs, MUSB_INTRRXE, musb->intrrxe); 1108 musb_writew(epio, MUSB_RXMAXP, 0); 1109 } 1110 1111 /* abort all pending DMA and requests */ 1112 nuke(musb_ep, -ESHUTDOWN); 1113 1114 musb_ep->desc = NULL; 1115 musb_ep->end_point.desc = NULL; 1116 1117 schedule_delayed_work(&musb->irq_work, 0); 1118 1119 spin_unlock_irqrestore(&(musb->lock), flags); 1120 1121 musb_dbg(musb, "%s", musb_ep->end_point.name); 1122 1123 return 0; 1124 } 1125 1126 /* 1127 * Allocate a request for an endpoint. 1128 * Reused by ep0 code. 1129 */ 1130 struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) 1131 { 1132 struct musb_ep *musb_ep = to_musb_ep(ep); 1133 struct musb_request *request = NULL; 1134 1135 request = kzalloc(sizeof *request, gfp_flags); 1136 if (!request) 1137 return NULL; 1138 1139 request->request.dma = DMA_ADDR_INVALID; 1140 request->epnum = musb_ep->current_epnum; 1141 request->ep = musb_ep; 1142 1143 trace_musb_req_alloc(request); 1144 return &request->request; 1145 } 1146 1147 /* 1148 * Free a request 1149 * Reused by ep0 code. 1150 */ 1151 void musb_free_request(struct usb_ep *ep, struct usb_request *req) 1152 { 1153 struct musb_request *request = to_musb_request(req); 1154 1155 trace_musb_req_free(request); 1156 kfree(request); 1157 } 1158 1159 static LIST_HEAD(buffers); 1160 1161 struct free_record { 1162 struct list_head list; 1163 struct device *dev; 1164 unsigned bytes; 1165 dma_addr_t dma; 1166 }; 1167 1168 /* 1169 * Context: controller locked, IRQs blocked. 1170 */ 1171 void musb_ep_restart(struct musb *musb, struct musb_request *req) 1172 { 1173 trace_musb_req_start(req); 1174 musb_ep_select(musb->mregs, req->epnum); 1175 if (req->tx) 1176 txstate(musb, req); 1177 else 1178 rxstate(musb, req); 1179 } 1180 1181 static int musb_ep_restart_resume_work(struct musb *musb, void *data) 1182 { 1183 struct musb_request *req = data; 1184 1185 musb_ep_restart(musb, req); 1186 1187 return 0; 1188 } 1189 1190 static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, 1191 gfp_t gfp_flags) 1192 { 1193 struct musb_ep *musb_ep; 1194 struct musb_request *request; 1195 struct musb *musb; 1196 int status; 1197 unsigned long lockflags; 1198 1199 if (!ep || !req) 1200 return -EINVAL; 1201 if (!req->buf) 1202 return -ENODATA; 1203 1204 musb_ep = to_musb_ep(ep); 1205 musb = musb_ep->musb; 1206 1207 request = to_musb_request(req); 1208 request->musb = musb; 1209 1210 if (request->ep != musb_ep) 1211 return -EINVAL; 1212 1213 status = pm_runtime_get(musb->controller); 1214 if ((status != -EINPROGRESS) && status < 0) { 1215 dev_err(musb->controller, 1216 "pm runtime get failed in %s\n", 1217 __func__); 1218 pm_runtime_put_noidle(musb->controller); 1219 1220 return status; 1221 } 1222 status = 0; 1223 1224 trace_musb_req_enq(request); 1225 1226 /* request is mine now... */ 1227 request->request.actual = 0; 1228 request->request.status = -EINPROGRESS; 1229 request->epnum = musb_ep->current_epnum; 1230 request->tx = musb_ep->is_in; 1231 1232 map_dma_buffer(request, musb, musb_ep); 1233 1234 spin_lock_irqsave(&musb->lock, lockflags); 1235 1236 /* don't queue if the ep is down */ 1237 if (!musb_ep->desc) { 1238 musb_dbg(musb, "req %p queued to %s while ep %s", 1239 req, ep->name, "disabled"); 1240 status = -ESHUTDOWN; 1241 unmap_dma_buffer(request, musb); 1242 goto unlock; 1243 } 1244 1245 /* add request to the list */ 1246 list_add_tail(&request->list, &musb_ep->req_list); 1247 1248 /* it this is the head of the queue, start i/o ... */ 1249 if (!musb_ep->busy && &request->list == musb_ep->req_list.next) { 1250 status = musb_queue_resume_work(musb, 1251 musb_ep_restart_resume_work, 1252 request); 1253 if (status < 0) { 1254 dev_err(musb->controller, "%s resume work: %i\n", 1255 __func__, status); 1256 list_del(&request->list); 1257 } 1258 } 1259 1260 unlock: 1261 spin_unlock_irqrestore(&musb->lock, lockflags); 1262 pm_runtime_mark_last_busy(musb->controller); 1263 pm_runtime_put_autosuspend(musb->controller); 1264 1265 return status; 1266 } 1267 1268 static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) 1269 { 1270 struct musb_ep *musb_ep = to_musb_ep(ep); 1271 struct musb_request *req = to_musb_request(request); 1272 struct musb_request *r; 1273 unsigned long flags; 1274 int status = 0; 1275 struct musb *musb = musb_ep->musb; 1276 1277 if (!ep || !request || req->ep != musb_ep) 1278 return -EINVAL; 1279 1280 trace_musb_req_deq(req); 1281 1282 spin_lock_irqsave(&musb->lock, flags); 1283 1284 list_for_each_entry(r, &musb_ep->req_list, list) { 1285 if (r == req) 1286 break; 1287 } 1288 if (r != req) { 1289 dev_err(musb->controller, "request %p not queued to %s\n", 1290 request, ep->name); 1291 status = -EINVAL; 1292 goto done; 1293 } 1294 1295 /* if the hardware doesn't have the request, easy ... */ 1296 if (musb_ep->req_list.next != &req->list || musb_ep->busy) 1297 musb_g_giveback(musb_ep, request, -ECONNRESET); 1298 1299 /* ... else abort the dma transfer ... */ 1300 else if (is_dma_capable() && musb_ep->dma) { 1301 struct dma_controller *c = musb->dma_controller; 1302 1303 musb_ep_select(musb->mregs, musb_ep->current_epnum); 1304 if (c->channel_abort) 1305 status = c->channel_abort(musb_ep->dma); 1306 else 1307 status = -EBUSY; 1308 if (status == 0) 1309 musb_g_giveback(musb_ep, request, -ECONNRESET); 1310 } else { 1311 /* NOTE: by sticking to easily tested hardware/driver states, 1312 * we leave counting of in-flight packets imprecise. 1313 */ 1314 musb_g_giveback(musb_ep, request, -ECONNRESET); 1315 } 1316 1317 done: 1318 spin_unlock_irqrestore(&musb->lock, flags); 1319 return status; 1320 } 1321 1322 /* 1323 * Set or clear the halt bit of an endpoint. A halted endpoint won't tx/rx any 1324 * data but will queue requests. 1325 * 1326 * exported to ep0 code 1327 */ 1328 static int musb_gadget_set_halt(struct usb_ep *ep, int value) 1329 { 1330 struct musb_ep *musb_ep = to_musb_ep(ep); 1331 u8 epnum = musb_ep->current_epnum; 1332 struct musb *musb = musb_ep->musb; 1333 void __iomem *epio = musb->endpoints[epnum].regs; 1334 void __iomem *mbase; 1335 unsigned long flags; 1336 u16 csr; 1337 struct musb_request *request; 1338 int status = 0; 1339 1340 if (!ep) 1341 return -EINVAL; 1342 mbase = musb->mregs; 1343 1344 spin_lock_irqsave(&musb->lock, flags); 1345 1346 if ((USB_ENDPOINT_XFER_ISOC == musb_ep->type)) { 1347 status = -EINVAL; 1348 goto done; 1349 } 1350 1351 musb_ep_select(mbase, epnum); 1352 1353 request = next_request(musb_ep); 1354 if (value) { 1355 if (request) { 1356 musb_dbg(musb, "request in progress, cannot halt %s", 1357 ep->name); 1358 status = -EAGAIN; 1359 goto done; 1360 } 1361 /* Cannot portably stall with non-empty FIFO */ 1362 if (musb_ep->is_in) { 1363 csr = musb_readw(epio, MUSB_TXCSR); 1364 if (csr & MUSB_TXCSR_FIFONOTEMPTY) { 1365 musb_dbg(musb, "FIFO busy, cannot halt %s", 1366 ep->name); 1367 status = -EAGAIN; 1368 goto done; 1369 } 1370 } 1371 } else 1372 musb_ep->wedged = 0; 1373 1374 /* set/clear the stall and toggle bits */ 1375 musb_dbg(musb, "%s: %s stall", ep->name, value ? "set" : "clear"); 1376 if (musb_ep->is_in) { 1377 csr = musb_readw(epio, MUSB_TXCSR); 1378 csr |= MUSB_TXCSR_P_WZC_BITS 1379 | MUSB_TXCSR_CLRDATATOG; 1380 if (value) 1381 csr |= MUSB_TXCSR_P_SENDSTALL; 1382 else 1383 csr &= ~(MUSB_TXCSR_P_SENDSTALL 1384 | MUSB_TXCSR_P_SENTSTALL); 1385 csr &= ~MUSB_TXCSR_TXPKTRDY; 1386 musb_writew(epio, MUSB_TXCSR, csr); 1387 } else { 1388 csr = musb_readw(epio, MUSB_RXCSR); 1389 csr |= MUSB_RXCSR_P_WZC_BITS 1390 | MUSB_RXCSR_FLUSHFIFO 1391 | MUSB_RXCSR_CLRDATATOG; 1392 if (value) 1393 csr |= MUSB_RXCSR_P_SENDSTALL; 1394 else 1395 csr &= ~(MUSB_RXCSR_P_SENDSTALL 1396 | MUSB_RXCSR_P_SENTSTALL); 1397 musb_writew(epio, MUSB_RXCSR, csr); 1398 } 1399 1400 /* maybe start the first request in the queue */ 1401 if (!musb_ep->busy && !value && request) { 1402 musb_dbg(musb, "restarting the request"); 1403 musb_ep_restart(musb, request); 1404 } 1405 1406 done: 1407 spin_unlock_irqrestore(&musb->lock, flags); 1408 return status; 1409 } 1410 1411 /* 1412 * Sets the halt feature with the clear requests ignored 1413 */ 1414 static int musb_gadget_set_wedge(struct usb_ep *ep) 1415 { 1416 struct musb_ep *musb_ep = to_musb_ep(ep); 1417 1418 if (!ep) 1419 return -EINVAL; 1420 1421 musb_ep->wedged = 1; 1422 1423 return usb_ep_set_halt(ep); 1424 } 1425 1426 static int musb_gadget_fifo_status(struct usb_ep *ep) 1427 { 1428 struct musb_ep *musb_ep = to_musb_ep(ep); 1429 void __iomem *epio = musb_ep->hw_ep->regs; 1430 int retval = -EINVAL; 1431 1432 if (musb_ep->desc && !musb_ep->is_in) { 1433 struct musb *musb = musb_ep->musb; 1434 int epnum = musb_ep->current_epnum; 1435 void __iomem *mbase = musb->mregs; 1436 unsigned long flags; 1437 1438 spin_lock_irqsave(&musb->lock, flags); 1439 1440 musb_ep_select(mbase, epnum); 1441 /* FIXME return zero unless RXPKTRDY is set */ 1442 retval = musb_readw(epio, MUSB_RXCOUNT); 1443 1444 spin_unlock_irqrestore(&musb->lock, flags); 1445 } 1446 return retval; 1447 } 1448 1449 static void musb_gadget_fifo_flush(struct usb_ep *ep) 1450 { 1451 struct musb_ep *musb_ep = to_musb_ep(ep); 1452 struct musb *musb = musb_ep->musb; 1453 u8 epnum = musb_ep->current_epnum; 1454 void __iomem *epio = musb->endpoints[epnum].regs; 1455 void __iomem *mbase; 1456 unsigned long flags; 1457 u16 csr; 1458 1459 mbase = musb->mregs; 1460 1461 spin_lock_irqsave(&musb->lock, flags); 1462 musb_ep_select(mbase, (u8) epnum); 1463 1464 /* disable interrupts */ 1465 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe & ~(1 << epnum)); 1466 1467 if (musb_ep->is_in) { 1468 csr = musb_readw(epio, MUSB_TXCSR); 1469 if (csr & MUSB_TXCSR_FIFONOTEMPTY) { 1470 csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS; 1471 /* 1472 * Setting both TXPKTRDY and FLUSHFIFO makes controller 1473 * to interrupt current FIFO loading, but not flushing 1474 * the already loaded ones. 1475 */ 1476 csr &= ~MUSB_TXCSR_TXPKTRDY; 1477 musb_writew(epio, MUSB_TXCSR, csr); 1478 /* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */ 1479 musb_writew(epio, MUSB_TXCSR, csr); 1480 } 1481 } else { 1482 csr = musb_readw(epio, MUSB_RXCSR); 1483 csr |= MUSB_RXCSR_FLUSHFIFO | MUSB_RXCSR_P_WZC_BITS; 1484 musb_writew(epio, MUSB_RXCSR, csr); 1485 musb_writew(epio, MUSB_RXCSR, csr); 1486 } 1487 1488 /* re-enable interrupt */ 1489 musb_writew(mbase, MUSB_INTRTXE, musb->intrtxe); 1490 spin_unlock_irqrestore(&musb->lock, flags); 1491 } 1492 1493 static const struct usb_ep_ops musb_ep_ops = { 1494 .enable = musb_gadget_enable, 1495 .disable = musb_gadget_disable, 1496 .alloc_request = musb_alloc_request, 1497 .free_request = musb_free_request, 1498 .queue = musb_gadget_queue, 1499 .dequeue = musb_gadget_dequeue, 1500 .set_halt = musb_gadget_set_halt, 1501 .set_wedge = musb_gadget_set_wedge, 1502 .fifo_status = musb_gadget_fifo_status, 1503 .fifo_flush = musb_gadget_fifo_flush 1504 }; 1505 1506 /* ----------------------------------------------------------------------- */ 1507 1508 static int musb_gadget_get_frame(struct usb_gadget *gadget) 1509 { 1510 struct musb *musb = gadget_to_musb(gadget); 1511 1512 return (int)musb_readw(musb->mregs, MUSB_FRAME); 1513 } 1514 1515 static int musb_gadget_wakeup(struct usb_gadget *gadget) 1516 { 1517 struct musb *musb = gadget_to_musb(gadget); 1518 void __iomem *mregs = musb->mregs; 1519 unsigned long flags; 1520 int status = -EINVAL; 1521 u8 power, devctl; 1522 int retries; 1523 1524 spin_lock_irqsave(&musb->lock, flags); 1525 1526 switch (musb->xceiv->otg->state) { 1527 case OTG_STATE_B_PERIPHERAL: 1528 /* NOTE: OTG state machine doesn't include B_SUSPENDED; 1529 * that's part of the standard usb 1.1 state machine, and 1530 * doesn't affect OTG transitions. 1531 */ 1532 if (musb->may_wakeup && musb->is_suspended) 1533 break; 1534 goto done; 1535 case OTG_STATE_B_IDLE: 1536 /* Start SRP ... OTG not required. */ 1537 devctl = musb_readb(mregs, MUSB_DEVCTL); 1538 musb_dbg(musb, "Sending SRP: devctl: %02x", devctl); 1539 devctl |= MUSB_DEVCTL_SESSION; 1540 musb_writeb(mregs, MUSB_DEVCTL, devctl); 1541 devctl = musb_readb(mregs, MUSB_DEVCTL); 1542 retries = 100; 1543 while (!(devctl & MUSB_DEVCTL_SESSION)) { 1544 devctl = musb_readb(mregs, MUSB_DEVCTL); 1545 if (retries-- < 1) 1546 break; 1547 } 1548 retries = 10000; 1549 while (devctl & MUSB_DEVCTL_SESSION) { 1550 devctl = musb_readb(mregs, MUSB_DEVCTL); 1551 if (retries-- < 1) 1552 break; 1553 } 1554 1555 spin_unlock_irqrestore(&musb->lock, flags); 1556 otg_start_srp(musb->xceiv->otg); 1557 spin_lock_irqsave(&musb->lock, flags); 1558 1559 /* Block idling for at least 1s */ 1560 musb_platform_try_idle(musb, 1561 jiffies + msecs_to_jiffies(1 * HZ)); 1562 1563 status = 0; 1564 goto done; 1565 default: 1566 musb_dbg(musb, "Unhandled wake: %s", 1567 usb_otg_state_string(musb->xceiv->otg->state)); 1568 goto done; 1569 } 1570 1571 status = 0; 1572 1573 power = musb_readb(mregs, MUSB_POWER); 1574 power |= MUSB_POWER_RESUME; 1575 musb_writeb(mregs, MUSB_POWER, power); 1576 musb_dbg(musb, "issue wakeup"); 1577 1578 /* FIXME do this next chunk in a timer callback, no udelay */ 1579 mdelay(2); 1580 1581 power = musb_readb(mregs, MUSB_POWER); 1582 power &= ~MUSB_POWER_RESUME; 1583 musb_writeb(mregs, MUSB_POWER, power); 1584 done: 1585 spin_unlock_irqrestore(&musb->lock, flags); 1586 return status; 1587 } 1588 1589 static int 1590 musb_gadget_set_self_powered(struct usb_gadget *gadget, int is_selfpowered) 1591 { 1592 gadget->is_selfpowered = !!is_selfpowered; 1593 return 0; 1594 } 1595 1596 static void musb_pullup(struct musb *musb, int is_on) 1597 { 1598 u8 power; 1599 1600 power = musb_readb(musb->mregs, MUSB_POWER); 1601 if (is_on) 1602 power |= MUSB_POWER_SOFTCONN; 1603 else 1604 power &= ~MUSB_POWER_SOFTCONN; 1605 1606 /* FIXME if on, HdrcStart; if off, HdrcStop */ 1607 1608 musb_dbg(musb, "gadget D+ pullup %s", 1609 is_on ? "on" : "off"); 1610 musb_writeb(musb->mregs, MUSB_POWER, power); 1611 } 1612 1613 #if 0 1614 static int musb_gadget_vbus_session(struct usb_gadget *gadget, int is_active) 1615 { 1616 musb_dbg(musb, "<= %s =>\n", __func__); 1617 1618 /* 1619 * FIXME iff driver's softconnect flag is set (as it is during probe, 1620 * though that can clear it), just musb_pullup(). 1621 */ 1622 1623 return -EINVAL; 1624 } 1625 #endif 1626 1627 static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) 1628 { 1629 struct musb *musb = gadget_to_musb(gadget); 1630 1631 if (!musb->xceiv->set_power) 1632 return -EOPNOTSUPP; 1633 return usb_phy_set_power(musb->xceiv, mA); 1634 } 1635 1636 static void musb_gadget_work(struct work_struct *work) 1637 { 1638 struct musb *musb; 1639 unsigned long flags; 1640 1641 musb = container_of(work, struct musb, gadget_work.work); 1642 pm_runtime_get_sync(musb->controller); 1643 spin_lock_irqsave(&musb->lock, flags); 1644 musb_pullup(musb, musb->softconnect); 1645 spin_unlock_irqrestore(&musb->lock, flags); 1646 pm_runtime_mark_last_busy(musb->controller); 1647 pm_runtime_put_autosuspend(musb->controller); 1648 } 1649 1650 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) 1651 { 1652 struct musb *musb = gadget_to_musb(gadget); 1653 unsigned long flags; 1654 1655 is_on = !!is_on; 1656 1657 /* NOTE: this assumes we are sensing vbus; we'd rather 1658 * not pullup unless the B-session is active. 1659 */ 1660 spin_lock_irqsave(&musb->lock, flags); 1661 if (is_on != musb->softconnect) { 1662 musb->softconnect = is_on; 1663 schedule_delayed_work(&musb->gadget_work, 0); 1664 } 1665 spin_unlock_irqrestore(&musb->lock, flags); 1666 1667 return 0; 1668 } 1669 1670 static int musb_gadget_start(struct usb_gadget *g, 1671 struct usb_gadget_driver *driver); 1672 static int musb_gadget_stop(struct usb_gadget *g); 1673 1674 static const struct usb_gadget_ops musb_gadget_operations = { 1675 .get_frame = musb_gadget_get_frame, 1676 .wakeup = musb_gadget_wakeup, 1677 .set_selfpowered = musb_gadget_set_self_powered, 1678 /* .vbus_session = musb_gadget_vbus_session, */ 1679 .vbus_draw = musb_gadget_vbus_draw, 1680 .pullup = musb_gadget_pullup, 1681 .udc_start = musb_gadget_start, 1682 .udc_stop = musb_gadget_stop, 1683 }; 1684 1685 /* ----------------------------------------------------------------------- */ 1686 1687 /* Registration */ 1688 1689 /* Only this registration code "knows" the rule (from USB standards) 1690 * about there being only one external upstream port. It assumes 1691 * all peripheral ports are external... 1692 */ 1693 1694 static void 1695 init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in) 1696 { 1697 struct musb_hw_ep *hw_ep = musb->endpoints + epnum; 1698 1699 memset(ep, 0, sizeof *ep); 1700 1701 ep->current_epnum = epnum; 1702 ep->musb = musb; 1703 ep->hw_ep = hw_ep; 1704 ep->is_in = is_in; 1705 1706 INIT_LIST_HEAD(&ep->req_list); 1707 1708 sprintf(ep->name, "ep%d%s", epnum, 1709 (!epnum || hw_ep->is_shared_fifo) ? "" : ( 1710 is_in ? "in" : "out")); 1711 ep->end_point.name = ep->name; 1712 INIT_LIST_HEAD(&ep->end_point.ep_list); 1713 if (!epnum) { 1714 usb_ep_set_maxpacket_limit(&ep->end_point, 64); 1715 ep->end_point.caps.type_control = true; 1716 ep->end_point.ops = &musb_g_ep0_ops; 1717 musb->g.ep0 = &ep->end_point; 1718 } else { 1719 if (is_in) 1720 usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx); 1721 else 1722 usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx); 1723 ep->end_point.caps.type_iso = true; 1724 ep->end_point.caps.type_bulk = true; 1725 ep->end_point.caps.type_int = true; 1726 ep->end_point.ops = &musb_ep_ops; 1727 list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list); 1728 } 1729 1730 if (!epnum || hw_ep->is_shared_fifo) { 1731 ep->end_point.caps.dir_in = true; 1732 ep->end_point.caps.dir_out = true; 1733 } else if (is_in) 1734 ep->end_point.caps.dir_in = true; 1735 else 1736 ep->end_point.caps.dir_out = true; 1737 } 1738 1739 /* 1740 * Initialize the endpoints exposed to peripheral drivers, with backlinks 1741 * to the rest of the driver state. 1742 */ 1743 static inline void musb_g_init_endpoints(struct musb *musb) 1744 { 1745 u8 epnum; 1746 struct musb_hw_ep *hw_ep; 1747 unsigned count = 0; 1748 1749 /* initialize endpoint list just once */ 1750 INIT_LIST_HEAD(&(musb->g.ep_list)); 1751 1752 for (epnum = 0, hw_ep = musb->endpoints; 1753 epnum < musb->nr_endpoints; 1754 epnum++, hw_ep++) { 1755 if (hw_ep->is_shared_fifo /* || !epnum */) { 1756 init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0); 1757 count++; 1758 } else { 1759 if (hw_ep->max_packet_sz_tx) { 1760 init_peripheral_ep(musb, &hw_ep->ep_in, 1761 epnum, 1); 1762 count++; 1763 } 1764 if (hw_ep->max_packet_sz_rx) { 1765 init_peripheral_ep(musb, &hw_ep->ep_out, 1766 epnum, 0); 1767 count++; 1768 } 1769 } 1770 } 1771 } 1772 1773 /* called once during driver setup to initialize and link into 1774 * the driver model; memory is zeroed. 1775 */ 1776 int musb_gadget_setup(struct musb *musb) 1777 { 1778 int status; 1779 1780 /* REVISIT minor race: if (erroneously) setting up two 1781 * musb peripherals at the same time, only the bus lock 1782 * is probably held. 1783 */ 1784 1785 musb->g.ops = &musb_gadget_operations; 1786 musb->g.max_speed = USB_SPEED_HIGH; 1787 musb->g.speed = USB_SPEED_UNKNOWN; 1788 1789 MUSB_DEV_MODE(musb); 1790 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 1791 1792 /* this "gadget" abstracts/virtualizes the controller */ 1793 musb->g.name = musb_driver_name; 1794 /* don't support otg protocols */ 1795 musb->g.is_otg = 0; 1796 INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work); 1797 musb_g_init_endpoints(musb); 1798 1799 musb->is_active = 0; 1800 musb_platform_try_idle(musb, 0); 1801 1802 status = usb_add_gadget_udc(musb->controller, &musb->g); 1803 if (status) 1804 goto err; 1805 1806 return 0; 1807 err: 1808 musb->g.dev.parent = NULL; 1809 device_unregister(&musb->g.dev); 1810 return status; 1811 } 1812 1813 void musb_gadget_cleanup(struct musb *musb) 1814 { 1815 if (musb->port_mode == MUSB_HOST) 1816 return; 1817 1818 cancel_delayed_work_sync(&musb->gadget_work); 1819 usb_del_gadget_udc(&musb->g); 1820 } 1821 1822 /* 1823 * Register the gadget driver. Used by gadget drivers when 1824 * registering themselves with the controller. 1825 * 1826 * -EINVAL something went wrong (not driver) 1827 * -EBUSY another gadget is already using the controller 1828 * -ENOMEM no memory to perform the operation 1829 * 1830 * @param driver the gadget driver 1831 * @return <0 if error, 0 if everything is fine 1832 */ 1833 static int musb_gadget_start(struct usb_gadget *g, 1834 struct usb_gadget_driver *driver) 1835 { 1836 struct musb *musb = gadget_to_musb(g); 1837 struct usb_otg *otg = musb->xceiv->otg; 1838 unsigned long flags; 1839 int retval = 0; 1840 1841 if (driver->max_speed < USB_SPEED_HIGH) { 1842 retval = -EINVAL; 1843 goto err; 1844 } 1845 1846 pm_runtime_get_sync(musb->controller); 1847 1848 musb->softconnect = 0; 1849 musb->gadget_driver = driver; 1850 1851 spin_lock_irqsave(&musb->lock, flags); 1852 musb->is_active = 1; 1853 1854 otg_set_peripheral(otg, &musb->g); 1855 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 1856 spin_unlock_irqrestore(&musb->lock, flags); 1857 1858 musb_start(musb); 1859 1860 /* REVISIT: funcall to other code, which also 1861 * handles power budgeting ... this way also 1862 * ensures HdrcStart is indirectly called. 1863 */ 1864 if (musb->xceiv->last_event == USB_EVENT_ID) 1865 musb_platform_set_vbus(musb, 1); 1866 1867 pm_runtime_mark_last_busy(musb->controller); 1868 pm_runtime_put_autosuspend(musb->controller); 1869 1870 return 0; 1871 1872 err: 1873 return retval; 1874 } 1875 1876 /* 1877 * Unregister the gadget driver. Used by gadget drivers when 1878 * unregistering themselves from the controller. 1879 * 1880 * @param driver the gadget driver to unregister 1881 */ 1882 static int musb_gadget_stop(struct usb_gadget *g) 1883 { 1884 struct musb *musb = gadget_to_musb(g); 1885 unsigned long flags; 1886 1887 pm_runtime_get_sync(musb->controller); 1888 1889 /* 1890 * REVISIT always use otg_set_peripheral() here too; 1891 * this needs to shut down the OTG engine. 1892 */ 1893 1894 spin_lock_irqsave(&musb->lock, flags); 1895 1896 musb_hnp_stop(musb); 1897 1898 (void) musb_gadget_vbus_draw(&musb->g, 0); 1899 1900 musb->xceiv->otg->state = OTG_STATE_UNDEFINED; 1901 musb_stop(musb); 1902 otg_set_peripheral(musb->xceiv->otg, NULL); 1903 1904 musb->is_active = 0; 1905 musb->gadget_driver = NULL; 1906 musb_platform_try_idle(musb, 0); 1907 spin_unlock_irqrestore(&musb->lock, flags); 1908 1909 /* 1910 * FIXME we need to be able to register another 1911 * gadget driver here and have everything work; 1912 * that currently misbehaves. 1913 */ 1914 1915 /* Force check of devctl register for PM runtime */ 1916 pm_runtime_mark_last_busy(musb->controller); 1917 pm_runtime_put_autosuspend(musb->controller); 1918 1919 return 0; 1920 } 1921 1922 /* ----------------------------------------------------------------------- */ 1923 1924 /* lifecycle operations called through plat_uds.c */ 1925 1926 void musb_g_resume(struct musb *musb) 1927 { 1928 musb->is_suspended = 0; 1929 switch (musb->xceiv->otg->state) { 1930 case OTG_STATE_B_IDLE: 1931 break; 1932 case OTG_STATE_B_WAIT_ACON: 1933 case OTG_STATE_B_PERIPHERAL: 1934 musb->is_active = 1; 1935 if (musb->gadget_driver && musb->gadget_driver->resume) { 1936 spin_unlock(&musb->lock); 1937 musb->gadget_driver->resume(&musb->g); 1938 spin_lock(&musb->lock); 1939 } 1940 break; 1941 default: 1942 WARNING("unhandled RESUME transition (%s)\n", 1943 usb_otg_state_string(musb->xceiv->otg->state)); 1944 } 1945 } 1946 1947 /* called when SOF packets stop for 3+ msec */ 1948 void musb_g_suspend(struct musb *musb) 1949 { 1950 u8 devctl; 1951 1952 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 1953 musb_dbg(musb, "musb_g_suspend: devctl %02x", devctl); 1954 1955 switch (musb->xceiv->otg->state) { 1956 case OTG_STATE_B_IDLE: 1957 if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) 1958 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 1959 break; 1960 case OTG_STATE_B_PERIPHERAL: 1961 musb->is_suspended = 1; 1962 if (musb->gadget_driver && musb->gadget_driver->suspend) { 1963 spin_unlock(&musb->lock); 1964 musb->gadget_driver->suspend(&musb->g); 1965 spin_lock(&musb->lock); 1966 } 1967 break; 1968 default: 1969 /* REVISIT if B_HOST, clear DEVCTL.HOSTREQ; 1970 * A_PERIPHERAL may need care too 1971 */ 1972 WARNING("unhandled SUSPEND transition (%s)", 1973 usb_otg_state_string(musb->xceiv->otg->state)); 1974 } 1975 } 1976 1977 /* Called during SRP */ 1978 void musb_g_wakeup(struct musb *musb) 1979 { 1980 musb_gadget_wakeup(&musb->g); 1981 } 1982 1983 /* called when VBUS drops below session threshold, and in other cases */ 1984 void musb_g_disconnect(struct musb *musb) 1985 { 1986 void __iomem *mregs = musb->mregs; 1987 u8 devctl = musb_readb(mregs, MUSB_DEVCTL); 1988 1989 musb_dbg(musb, "musb_g_disconnect: devctl %02x", devctl); 1990 1991 /* clear HR */ 1992 musb_writeb(mregs, MUSB_DEVCTL, devctl & MUSB_DEVCTL_SESSION); 1993 1994 /* don't draw vbus until new b-default session */ 1995 (void) musb_gadget_vbus_draw(&musb->g, 0); 1996 1997 musb->g.speed = USB_SPEED_UNKNOWN; 1998 if (musb->gadget_driver && musb->gadget_driver->disconnect) { 1999 spin_unlock(&musb->lock); 2000 musb->gadget_driver->disconnect(&musb->g); 2001 spin_lock(&musb->lock); 2002 } 2003 2004 switch (musb->xceiv->otg->state) { 2005 default: 2006 musb_dbg(musb, "Unhandled disconnect %s, setting a_idle", 2007 usb_otg_state_string(musb->xceiv->otg->state)); 2008 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 2009 MUSB_HST_MODE(musb); 2010 break; 2011 case OTG_STATE_A_PERIPHERAL: 2012 musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; 2013 MUSB_HST_MODE(musb); 2014 break; 2015 case OTG_STATE_B_WAIT_ACON: 2016 case OTG_STATE_B_HOST: 2017 case OTG_STATE_B_PERIPHERAL: 2018 case OTG_STATE_B_IDLE: 2019 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 2020 break; 2021 case OTG_STATE_B_SRP_INIT: 2022 break; 2023 } 2024 2025 musb->is_active = 0; 2026 } 2027 2028 void musb_g_reset(struct musb *musb) 2029 __releases(musb->lock) 2030 __acquires(musb->lock) 2031 { 2032 void __iomem *mbase = musb->mregs; 2033 u8 devctl = musb_readb(mbase, MUSB_DEVCTL); 2034 u8 power; 2035 2036 musb_dbg(musb, "<== %s driver '%s'", 2037 (devctl & MUSB_DEVCTL_BDEVICE) 2038 ? "B-Device" : "A-Device", 2039 musb->gadget_driver 2040 ? musb->gadget_driver->driver.name 2041 : NULL 2042 ); 2043 2044 /* report reset, if we didn't already (flushing EP state) */ 2045 if (musb->gadget_driver && musb->g.speed != USB_SPEED_UNKNOWN) { 2046 spin_unlock(&musb->lock); 2047 usb_gadget_udc_reset(&musb->g, musb->gadget_driver); 2048 spin_lock(&musb->lock); 2049 } 2050 2051 /* clear HR */ 2052 else if (devctl & MUSB_DEVCTL_HR) 2053 musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); 2054 2055 2056 /* what speed did we negotiate? */ 2057 power = musb_readb(mbase, MUSB_POWER); 2058 musb->g.speed = (power & MUSB_POWER_HSMODE) 2059 ? USB_SPEED_HIGH : USB_SPEED_FULL; 2060 2061 /* start in USB_STATE_DEFAULT */ 2062 musb->is_active = 1; 2063 musb->is_suspended = 0; 2064 MUSB_DEV_MODE(musb); 2065 musb->address = 0; 2066 musb->ep0_state = MUSB_EP0_STAGE_SETUP; 2067 2068 musb->may_wakeup = 0; 2069 musb->g.b_hnp_enable = 0; 2070 musb->g.a_alt_hnp_support = 0; 2071 musb->g.a_hnp_support = 0; 2072 musb->g.quirk_zlp_not_supp = 1; 2073 2074 /* Normal reset, as B-Device; 2075 * or else after HNP, as A-Device 2076 */ 2077 if (!musb->g.is_otg) { 2078 /* USB device controllers that are not OTG compatible 2079 * may not have DEVCTL register in silicon. 2080 * In that case, do not rely on devctl for setting 2081 * peripheral mode. 2082 */ 2083 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 2084 musb->g.is_a_peripheral = 0; 2085 } else if (devctl & MUSB_DEVCTL_BDEVICE) { 2086 musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL; 2087 musb->g.is_a_peripheral = 0; 2088 } else { 2089 musb->xceiv->otg->state = OTG_STATE_A_PERIPHERAL; 2090 musb->g.is_a_peripheral = 1; 2091 } 2092 2093 /* start with default limits on VBUS power draw */ 2094 (void) musb_gadget_vbus_draw(&musb->g, 8); 2095 } 2096