1 /* 2 * Texas Instruments DSPS platforms "glue layer" 3 * 4 * Copyright (C) 2012, by Texas Instruments 5 * 6 * Based on the am35x "glue layer" code. 7 * 8 * This file is part of the Inventra Controller Driver for Linux. 9 * 10 * The Inventra Controller Driver for Linux is free software; you 11 * can redistribute it and/or modify it under the terms of the GNU 12 * General Public License version 2 as published by the Free Software 13 * Foundation. 14 * 15 * The Inventra Controller Driver for Linux is distributed in 16 * the hope that it will be useful, but WITHOUT ANY WARRANTY; 17 * without even the implied warranty of MERCHANTABILITY or 18 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public 19 * License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with The Inventra Controller Driver for Linux ; if not, 23 * write to the Free Software Foundation, Inc., 59 Temple Place, 24 * Suite 330, Boston, MA 02111-1307 USA 25 * 26 * musb_dsps.c will be a common file for all the TI DSPS platforms 27 * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x. 28 * For now only ti81x is using this and in future davinci.c, am35x.c 29 * da8xx.c would be merged to this file after testing. 30 */ 31 32 #include <linux/init.h> 33 #include <linux/io.h> 34 #include <linux/err.h> 35 #include <linux/platform_device.h> 36 #include <linux/dma-mapping.h> 37 #include <linux/pm_runtime.h> 38 #include <linux/module.h> 39 #include <linux/usb/usb_phy_gen_xceiv.h> 40 #include <linux/platform_data/usb-omap.h> 41 #include <linux/sizes.h> 42 43 #include <linux/of.h> 44 #include <linux/of_device.h> 45 #include <linux/of_address.h> 46 #include <linux/of_irq.h> 47 #include <linux/usb/of.h> 48 49 #include "musb_core.h" 50 51 static const struct of_device_id musb_dsps_of_match[]; 52 53 /** 54 * avoid using musb_readx()/musb_writex() as glue layer should not be 55 * dependent on musb core layer symbols. 56 */ 57 static inline u8 dsps_readb(const void __iomem *addr, unsigned offset) 58 { return __raw_readb(addr + offset); } 59 60 static inline u32 dsps_readl(const void __iomem *addr, unsigned offset) 61 { return __raw_readl(addr + offset); } 62 63 static inline void dsps_writeb(void __iomem *addr, unsigned offset, u8 data) 64 { __raw_writeb(data, addr + offset); } 65 66 static inline void dsps_writel(void __iomem *addr, unsigned offset, u32 data) 67 { __raw_writel(data, addr + offset); } 68 69 /** 70 * DSPS musb wrapper register offset. 71 * FIXME: This should be expanded to have all the wrapper registers from TI DSPS 72 * musb ips. 73 */ 74 struct dsps_musb_wrapper { 75 u16 revision; 76 u16 control; 77 u16 status; 78 u16 epintr_set; 79 u16 epintr_clear; 80 u16 epintr_status; 81 u16 coreintr_set; 82 u16 coreintr_clear; 83 u16 coreintr_status; 84 u16 phy_utmi; 85 u16 mode; 86 87 /* bit positions for control */ 88 unsigned reset:5; 89 90 /* bit positions for interrupt */ 91 unsigned usb_shift:5; 92 u32 usb_mask; 93 u32 usb_bitmap; 94 unsigned drvvbus:5; 95 96 unsigned txep_shift:5; 97 u32 txep_mask; 98 u32 txep_bitmap; 99 100 unsigned rxep_shift:5; 101 u32 rxep_mask; 102 u32 rxep_bitmap; 103 104 /* bit positions for phy_utmi */ 105 unsigned otg_disable:5; 106 107 /* bit positions for mode */ 108 unsigned iddig:5; 109 /* miscellaneous stuff */ 110 u8 poll_seconds; 111 }; 112 113 /** 114 * DSPS glue structure. 115 */ 116 struct dsps_glue { 117 struct device *dev; 118 struct platform_device *musb; /* child musb pdev */ 119 const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ 120 struct timer_list timer; /* otg_workaround timer */ 121 unsigned long last_timer; /* last timer data for each instance */ 122 }; 123 124 /** 125 * dsps_musb_enable - enable interrupts 126 */ 127 static void dsps_musb_enable(struct musb *musb) 128 { 129 struct device *dev = musb->controller; 130 struct platform_device *pdev = to_platform_device(dev->parent); 131 struct dsps_glue *glue = platform_get_drvdata(pdev); 132 const struct dsps_musb_wrapper *wrp = glue->wrp; 133 void __iomem *reg_base = musb->ctrl_base; 134 u32 epmask, coremask; 135 136 /* Workaround: setup IRQs through both register sets. */ 137 epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) | 138 ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift); 139 coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF); 140 141 dsps_writel(reg_base, wrp->epintr_set, epmask); 142 dsps_writel(reg_base, wrp->coreintr_set, coremask); 143 /* Force the DRVVBUS IRQ so we can start polling for ID change. */ 144 dsps_writel(reg_base, wrp->coreintr_set, 145 (1 << wrp->drvvbus) << wrp->usb_shift); 146 } 147 148 /** 149 * dsps_musb_disable - disable HDRC and flush interrupts 150 */ 151 static void dsps_musb_disable(struct musb *musb) 152 { 153 struct device *dev = musb->controller; 154 struct platform_device *pdev = to_platform_device(dev->parent); 155 struct dsps_glue *glue = platform_get_drvdata(pdev); 156 const struct dsps_musb_wrapper *wrp = glue->wrp; 157 void __iomem *reg_base = musb->ctrl_base; 158 159 dsps_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap); 160 dsps_writel(reg_base, wrp->epintr_clear, 161 wrp->txep_bitmap | wrp->rxep_bitmap); 162 dsps_writeb(musb->mregs, MUSB_DEVCTL, 0); 163 } 164 165 static void otg_timer(unsigned long _musb) 166 { 167 struct musb *musb = (void *)_musb; 168 void __iomem *mregs = musb->mregs; 169 struct device *dev = musb->controller; 170 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 171 const struct dsps_musb_wrapper *wrp = glue->wrp; 172 u8 devctl; 173 unsigned long flags; 174 175 /* 176 * We poll because DSPS IP's won't expose several OTG-critical 177 * status change events (from the transceiver) otherwise. 178 */ 179 devctl = dsps_readb(mregs, MUSB_DEVCTL); 180 dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, 181 usb_otg_state_string(musb->xceiv->state)); 182 183 spin_lock_irqsave(&musb->lock, flags); 184 switch (musb->xceiv->state) { 185 case OTG_STATE_A_WAIT_BCON: 186 devctl &= ~MUSB_DEVCTL_SESSION; 187 dsps_writeb(musb->mregs, MUSB_DEVCTL, devctl); 188 189 devctl = dsps_readb(musb->mregs, MUSB_DEVCTL); 190 if (devctl & MUSB_DEVCTL_BDEVICE) { 191 musb->xceiv->state = OTG_STATE_B_IDLE; 192 MUSB_DEV_MODE(musb); 193 } else { 194 musb->xceiv->state = OTG_STATE_A_IDLE; 195 MUSB_HST_MODE(musb); 196 } 197 break; 198 case OTG_STATE_A_WAIT_VFALL: 199 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; 200 dsps_writel(musb->ctrl_base, wrp->coreintr_set, 201 MUSB_INTR_VBUSERROR << wrp->usb_shift); 202 break; 203 case OTG_STATE_B_IDLE: 204 devctl = dsps_readb(mregs, MUSB_DEVCTL); 205 if (devctl & MUSB_DEVCTL_BDEVICE) 206 mod_timer(&glue->timer, 207 jiffies + wrp->poll_seconds * HZ); 208 else 209 musb->xceiv->state = OTG_STATE_A_IDLE; 210 break; 211 default: 212 break; 213 } 214 spin_unlock_irqrestore(&musb->lock, flags); 215 } 216 217 static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) 218 { 219 struct device *dev = musb->controller; 220 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 221 222 if (timeout == 0) 223 timeout = jiffies + msecs_to_jiffies(3); 224 225 /* Never idle if active, or when VBUS timeout is not set as host */ 226 if (musb->is_active || (musb->a_wait_bcon == 0 && 227 musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) { 228 dev_dbg(musb->controller, "%s active, deleting timer\n", 229 usb_otg_state_string(musb->xceiv->state)); 230 del_timer(&glue->timer); 231 glue->last_timer = jiffies; 232 return; 233 } 234 if (musb->port_mode == MUSB_PORT_MODE_HOST) 235 return; 236 237 if (time_after(glue->last_timer, timeout) && 238 timer_pending(&glue->timer)) { 239 dev_dbg(musb->controller, 240 "Longer idle timer already pending, ignoring...\n"); 241 return; 242 } 243 glue->last_timer = timeout; 244 245 dev_dbg(musb->controller, "%s inactive, starting idle timer for %u ms\n", 246 usb_otg_state_string(musb->xceiv->state), 247 jiffies_to_msecs(timeout - jiffies)); 248 mod_timer(&glue->timer, timeout); 249 } 250 251 static irqreturn_t dsps_interrupt(int irq, void *hci) 252 { 253 struct musb *musb = hci; 254 void __iomem *reg_base = musb->ctrl_base; 255 struct device *dev = musb->controller; 256 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 257 const struct dsps_musb_wrapper *wrp = glue->wrp; 258 unsigned long flags; 259 irqreturn_t ret = IRQ_NONE; 260 u32 epintr, usbintr; 261 262 spin_lock_irqsave(&musb->lock, flags); 263 264 /* Get endpoint interrupts */ 265 epintr = dsps_readl(reg_base, wrp->epintr_status); 266 musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift; 267 musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift; 268 269 if (epintr) 270 dsps_writel(reg_base, wrp->epintr_status, epintr); 271 272 /* Get usb core interrupts */ 273 usbintr = dsps_readl(reg_base, wrp->coreintr_status); 274 if (!usbintr && !epintr) 275 goto out; 276 277 musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift; 278 if (usbintr) 279 dsps_writel(reg_base, wrp->coreintr_status, usbintr); 280 281 dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", 282 usbintr, epintr); 283 /* 284 * DRVVBUS IRQs are the only proxy we have (a very poor one!) for 285 * DSPS IP's missing ID change IRQ. We need an ID change IRQ to 286 * switch appropriately between halves of the OTG state machine. 287 * Managing DEVCTL.SESSION per Mentor docs requires that we know its 288 * value but DEVCTL.BDEVICE is invalid without DEVCTL.SESSION set. 289 * Also, DRVVBUS pulses for SRP (but not at 5V) ... 290 */ 291 if (is_host_active(musb) && usbintr & MUSB_INTR_BABBLE) 292 pr_info("CAUTION: musb: Babble Interrupt Occurred\n"); 293 294 if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { 295 int drvvbus = dsps_readl(reg_base, wrp->status); 296 void __iomem *mregs = musb->mregs; 297 u8 devctl = dsps_readb(mregs, MUSB_DEVCTL); 298 int err; 299 300 err = musb->int_usb & MUSB_INTR_VBUSERROR; 301 if (err) { 302 /* 303 * The Mentor core doesn't debounce VBUS as needed 304 * to cope with device connect current spikes. This 305 * means it's not uncommon for bus-powered devices 306 * to get VBUS errors during enumeration. 307 * 308 * This is a workaround, but newer RTL from Mentor 309 * seems to allow a better one: "re"-starting sessions 310 * without waiting for VBUS to stop registering in 311 * devctl. 312 */ 313 musb->int_usb &= ~MUSB_INTR_VBUSERROR; 314 musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; 315 mod_timer(&glue->timer, 316 jiffies + wrp->poll_seconds * HZ); 317 WARNING("VBUS error workaround (delay coming)\n"); 318 } else if (drvvbus) { 319 MUSB_HST_MODE(musb); 320 musb->xceiv->otg->default_a = 1; 321 musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; 322 del_timer(&glue->timer); 323 } else { 324 musb->is_active = 0; 325 MUSB_DEV_MODE(musb); 326 musb->xceiv->otg->default_a = 0; 327 musb->xceiv->state = OTG_STATE_B_IDLE; 328 } 329 330 /* NOTE: this must complete power-on within 100 ms. */ 331 dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", 332 drvvbus ? "on" : "off", 333 usb_otg_state_string(musb->xceiv->state), 334 err ? " ERROR" : "", 335 devctl); 336 ret = IRQ_HANDLED; 337 } 338 339 if (musb->int_tx || musb->int_rx || musb->int_usb) 340 ret |= musb_interrupt(musb); 341 342 /* Poll for ID change */ 343 if (musb->xceiv->state == OTG_STATE_B_IDLE) 344 mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ); 345 out: 346 spin_unlock_irqrestore(&musb->lock, flags); 347 348 return ret; 349 } 350 351 static int dsps_musb_init(struct musb *musb) 352 { 353 struct device *dev = musb->controller; 354 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 355 struct platform_device *parent = to_platform_device(dev->parent); 356 const struct dsps_musb_wrapper *wrp = glue->wrp; 357 void __iomem *reg_base; 358 struct resource *r; 359 u32 rev, val; 360 361 r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control"); 362 if (!r) 363 return -EINVAL; 364 365 reg_base = devm_ioremap_resource(dev, r); 366 if (IS_ERR(reg_base)) 367 return PTR_ERR(reg_base); 368 musb->ctrl_base = reg_base; 369 370 /* NOP driver needs change if supporting dual instance */ 371 musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0); 372 if (IS_ERR(musb->xceiv)) 373 return PTR_ERR(musb->xceiv); 374 375 /* Returns zero if e.g. not clocked */ 376 rev = dsps_readl(reg_base, wrp->revision); 377 if (!rev) 378 return -ENODEV; 379 380 usb_phy_init(musb->xceiv); 381 setup_timer(&glue->timer, otg_timer, (unsigned long) musb); 382 383 /* Reset the musb */ 384 dsps_writel(reg_base, wrp->control, (1 << wrp->reset)); 385 386 musb->isr = dsps_interrupt; 387 388 /* reset the otgdisable bit, needed for host mode to work */ 389 val = dsps_readl(reg_base, wrp->phy_utmi); 390 val &= ~(1 << wrp->otg_disable); 391 dsps_writel(musb->ctrl_base, wrp->phy_utmi, val); 392 393 return 0; 394 } 395 396 static int dsps_musb_exit(struct musb *musb) 397 { 398 struct device *dev = musb->controller; 399 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 400 401 del_timer_sync(&glue->timer); 402 403 usb_phy_shutdown(musb->xceiv); 404 return 0; 405 } 406 407 static struct musb_platform_ops dsps_ops = { 408 .init = dsps_musb_init, 409 .exit = dsps_musb_exit, 410 411 .enable = dsps_musb_enable, 412 .disable = dsps_musb_disable, 413 414 .try_idle = dsps_musb_try_idle, 415 }; 416 417 static u64 musb_dmamask = DMA_BIT_MASK(32); 418 419 static int get_int_prop(struct device_node *dn, const char *s) 420 { 421 int ret; 422 u32 val; 423 424 ret = of_property_read_u32(dn, s, &val); 425 if (ret) 426 return 0; 427 return val; 428 } 429 430 static int get_musb_port_mode(struct device *dev) 431 { 432 enum usb_dr_mode mode; 433 434 mode = of_usb_get_dr_mode(dev->of_node); 435 switch (mode) { 436 case USB_DR_MODE_HOST: 437 return MUSB_PORT_MODE_HOST; 438 439 case USB_DR_MODE_PERIPHERAL: 440 return MUSB_PORT_MODE_GADGET; 441 442 case USB_DR_MODE_UNKNOWN: 443 case USB_DR_MODE_OTG: 444 default: 445 return MUSB_PORT_MODE_DUAL_ROLE; 446 }; 447 } 448 449 static int dsps_create_musb_pdev(struct dsps_glue *glue, 450 struct platform_device *parent) 451 { 452 struct musb_hdrc_platform_data pdata; 453 struct resource resources[2]; 454 struct resource *res; 455 struct device *dev = &parent->dev; 456 struct musb_hdrc_config *config; 457 struct platform_device *musb; 458 struct device_node *dn = parent->dev.of_node; 459 int ret; 460 461 memset(resources, 0, sizeof(resources)); 462 res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc"); 463 if (!res) { 464 dev_err(dev, "failed to get memory.\n"); 465 return -EINVAL; 466 } 467 resources[0] = *res; 468 469 res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc"); 470 if (!res) { 471 dev_err(dev, "failed to get irq.\n"); 472 return -EINVAL; 473 } 474 resources[1] = *res; 475 476 /* allocate the child platform device */ 477 musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); 478 if (!musb) { 479 dev_err(dev, "failed to allocate musb device\n"); 480 return -ENOMEM; 481 } 482 483 musb->dev.parent = dev; 484 musb->dev.dma_mask = &musb_dmamask; 485 musb->dev.coherent_dma_mask = musb_dmamask; 486 musb->dev.of_node = of_node_get(dn); 487 488 glue->musb = musb; 489 490 ret = platform_device_add_resources(musb, resources, 491 ARRAY_SIZE(resources)); 492 if (ret) { 493 dev_err(dev, "failed to add resources\n"); 494 goto err; 495 } 496 497 config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL); 498 if (!config) { 499 dev_err(dev, "failed to allocate musb hdrc config\n"); 500 ret = -ENOMEM; 501 goto err; 502 } 503 pdata.config = config; 504 pdata.platform_ops = &dsps_ops; 505 506 config->num_eps = get_int_prop(dn, "mentor,num-eps"); 507 config->ram_bits = get_int_prop(dn, "mentor,ram-bits"); 508 pdata.mode = get_musb_port_mode(dev); 509 /* DT keeps this entry in mA, musb expects it as per USB spec */ 510 pdata.power = get_int_prop(dn, "mentor,power") / 2; 511 config->multipoint = of_property_read_bool(dn, "mentor,multipoint"); 512 513 ret = platform_device_add_data(musb, &pdata, sizeof(pdata)); 514 if (ret) { 515 dev_err(dev, "failed to add platform_data\n"); 516 goto err; 517 } 518 519 ret = platform_device_add(musb); 520 if (ret) { 521 dev_err(dev, "failed to register musb device\n"); 522 goto err; 523 } 524 return 0; 525 526 err: 527 platform_device_put(musb); 528 return ret; 529 } 530 531 static int dsps_probe(struct platform_device *pdev) 532 { 533 const struct of_device_id *match; 534 const struct dsps_musb_wrapper *wrp; 535 struct dsps_glue *glue; 536 int ret; 537 538 if (!strcmp(pdev->name, "musb-hdrc")) 539 return -ENODEV; 540 541 match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); 542 if (!match) { 543 dev_err(&pdev->dev, "fail to get matching of_match struct\n"); 544 return -EINVAL; 545 } 546 wrp = match->data; 547 548 /* allocate glue */ 549 glue = kzalloc(sizeof(*glue), GFP_KERNEL); 550 if (!glue) { 551 dev_err(&pdev->dev, "unable to allocate glue memory\n"); 552 return -ENOMEM; 553 } 554 555 glue->dev = &pdev->dev; 556 glue->wrp = wrp; 557 558 platform_set_drvdata(pdev, glue); 559 pm_runtime_enable(&pdev->dev); 560 561 ret = pm_runtime_get_sync(&pdev->dev); 562 if (ret < 0) { 563 dev_err(&pdev->dev, "pm_runtime_get_sync FAILED"); 564 goto err2; 565 } 566 567 ret = dsps_create_musb_pdev(glue, pdev); 568 if (ret) 569 goto err3; 570 571 return 0; 572 573 err3: 574 pm_runtime_put(&pdev->dev); 575 err2: 576 pm_runtime_disable(&pdev->dev); 577 kfree(glue); 578 return ret; 579 } 580 581 static int dsps_remove(struct platform_device *pdev) 582 { 583 struct dsps_glue *glue = platform_get_drvdata(pdev); 584 585 platform_device_unregister(glue->musb); 586 587 /* disable usbss clocks */ 588 pm_runtime_put(&pdev->dev); 589 pm_runtime_disable(&pdev->dev); 590 kfree(glue); 591 return 0; 592 } 593 594 static const struct dsps_musb_wrapper am33xx_driver_data = { 595 .revision = 0x00, 596 .control = 0x14, 597 .status = 0x18, 598 .epintr_set = 0x38, 599 .epintr_clear = 0x40, 600 .epintr_status = 0x30, 601 .coreintr_set = 0x3c, 602 .coreintr_clear = 0x44, 603 .coreintr_status = 0x34, 604 .phy_utmi = 0xe0, 605 .mode = 0xe8, 606 .reset = 0, 607 .otg_disable = 21, 608 .iddig = 8, 609 .usb_shift = 0, 610 .usb_mask = 0x1ff, 611 .usb_bitmap = (0x1ff << 0), 612 .drvvbus = 8, 613 .txep_shift = 0, 614 .txep_mask = 0xffff, 615 .txep_bitmap = (0xffff << 0), 616 .rxep_shift = 16, 617 .rxep_mask = 0xfffe, 618 .rxep_bitmap = (0xfffe << 16), 619 .poll_seconds = 2, 620 }; 621 622 static const struct of_device_id musb_dsps_of_match[] = { 623 { .compatible = "ti,musb-am33xx", 624 .data = (void *) &am33xx_driver_data, }, 625 { }, 626 }; 627 MODULE_DEVICE_TABLE(of, musb_dsps_of_match); 628 629 static struct platform_driver dsps_usbss_driver = { 630 .probe = dsps_probe, 631 .remove = dsps_remove, 632 .driver = { 633 .name = "musb-dsps", 634 .of_match_table = of_match_ptr(musb_dsps_of_match), 635 }, 636 }; 637 638 MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer"); 639 MODULE_AUTHOR("Ravi B <ravibabu@ti.com>"); 640 MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>"); 641 MODULE_LICENSE("GPL v2"); 642 643 module_platform_driver(dsps_usbss_driver); 644