1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Texas Instruments DSPS platforms "glue layer" 4 * 5 * Copyright (C) 2012, by Texas Instruments 6 * 7 * Based on the am35x "glue layer" code. 8 * 9 * This file is part of the Inventra Controller Driver for Linux. 10 * 11 * musb_dsps.c will be a common file for all the TI DSPS platforms 12 * such as dm64x, dm36x, dm35x, da8x, am35x and ti81x. 13 * For now only ti81x is using this and in future davinci.c, am35x.c 14 * da8xx.c would be merged to this file after testing. 15 */ 16 17 #include <linux/io.h> 18 #include <linux/irq.h> 19 #include <linux/err.h> 20 #include <linux/platform_device.h> 21 #include <linux/dma-mapping.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/module.h> 24 #include <linux/usb/usb_phy_generic.h> 25 #include <linux/platform_data/usb-omap.h> 26 #include <linux/sizes.h> 27 28 #include <linux/of.h> 29 #include <linux/of_device.h> 30 #include <linux/of_address.h> 31 #include <linux/of_irq.h> 32 #include <linux/usb/of.h> 33 34 #include <linux/debugfs.h> 35 36 #include "musb_core.h" 37 38 static const struct of_device_id musb_dsps_of_match[]; 39 40 /* 41 * DSPS musb wrapper register offset. 42 * FIXME: This should be expanded to have all the wrapper registers from TI DSPS 43 * musb ips. 44 */ 45 struct dsps_musb_wrapper { 46 u16 revision; 47 u16 control; 48 u16 status; 49 u16 epintr_set; 50 u16 epintr_clear; 51 u16 epintr_status; 52 u16 coreintr_set; 53 u16 coreintr_clear; 54 u16 coreintr_status; 55 u16 phy_utmi; 56 u16 mode; 57 u16 tx_mode; 58 u16 rx_mode; 59 60 /* bit positions for control */ 61 unsigned reset:5; 62 63 /* bit positions for interrupt */ 64 unsigned usb_shift:5; 65 u32 usb_mask; 66 u32 usb_bitmap; 67 unsigned drvvbus:5; 68 69 unsigned txep_shift:5; 70 u32 txep_mask; 71 u32 txep_bitmap; 72 73 unsigned rxep_shift:5; 74 u32 rxep_mask; 75 u32 rxep_bitmap; 76 77 /* bit positions for phy_utmi */ 78 unsigned otg_disable:5; 79 80 /* bit positions for mode */ 81 unsigned iddig:5; 82 unsigned iddig_mux:5; 83 /* miscellaneous stuff */ 84 unsigned poll_timeout; 85 }; 86 87 /* 88 * register shadow for suspend 89 */ 90 struct dsps_context { 91 u32 control; 92 u32 epintr; 93 u32 coreintr; 94 u32 phy_utmi; 95 u32 mode; 96 u32 tx_mode; 97 u32 rx_mode; 98 }; 99 100 /* 101 * DSPS glue structure. 102 */ 103 struct dsps_glue { 104 struct device *dev; 105 struct platform_device *musb; /* child musb pdev */ 106 const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */ 107 int vbus_irq; /* optional vbus irq */ 108 unsigned long last_timer; /* last timer data for each instance */ 109 bool sw_babble_enabled; 110 void __iomem *usbss_base; 111 112 struct dsps_context context; 113 struct debugfs_regset32 regset; 114 struct dentry *dbgfs_root; 115 }; 116 117 static const struct debugfs_reg32 dsps_musb_regs[] = { 118 { "revision", 0x00 }, 119 { "control", 0x14 }, 120 { "status", 0x18 }, 121 { "eoi", 0x24 }, 122 { "intr0_stat", 0x30 }, 123 { "intr1_stat", 0x34 }, 124 { "intr0_set", 0x38 }, 125 { "intr1_set", 0x3c }, 126 { "txmode", 0x70 }, 127 { "rxmode", 0x74 }, 128 { "autoreq", 0xd0 }, 129 { "srpfixtime", 0xd4 }, 130 { "tdown", 0xd8 }, 131 { "phy_utmi", 0xe0 }, 132 { "mode", 0xe8 }, 133 }; 134 135 static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms) 136 { 137 struct musb *musb = platform_get_drvdata(glue->musb); 138 int wait; 139 140 if (wait_ms < 0) 141 wait = msecs_to_jiffies(glue->wrp->poll_timeout); 142 else 143 wait = msecs_to_jiffies(wait_ms); 144 145 mod_timer(&musb->dev_timer, jiffies + wait); 146 } 147 148 /* 149 * If no vbus irq from the PMIC is configured, we need to poll VBUS status. 150 */ 151 static void dsps_mod_timer_optional(struct dsps_glue *glue) 152 { 153 if (glue->vbus_irq) 154 return; 155 156 dsps_mod_timer(glue, -1); 157 } 158 159 /* USBSS / USB AM335x */ 160 #define USBSS_IRQ_STATUS 0x28 161 #define USBSS_IRQ_ENABLER 0x2c 162 #define USBSS_IRQ_CLEARR 0x30 163 164 #define USBSS_IRQ_PD_COMP (1 << 2) 165 166 /* 167 * dsps_musb_enable - enable interrupts 168 */ 169 static void dsps_musb_enable(struct musb *musb) 170 { 171 struct device *dev = musb->controller; 172 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 173 const struct dsps_musb_wrapper *wrp = glue->wrp; 174 void __iomem *reg_base = musb->ctrl_base; 175 u32 epmask, coremask; 176 177 /* Workaround: setup IRQs through both register sets. */ 178 epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) | 179 ((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift); 180 coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF); 181 182 musb_writel(reg_base, wrp->epintr_set, epmask); 183 musb_writel(reg_base, wrp->coreintr_set, coremask); 184 /* 185 * start polling for runtime PM active and idle, 186 * and for ID change in dual-role idle mode. 187 */ 188 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE) 189 dsps_mod_timer(glue, -1); 190 } 191 192 /* 193 * dsps_musb_disable - disable HDRC and flush interrupts 194 */ 195 static void dsps_musb_disable(struct musb *musb) 196 { 197 struct device *dev = musb->controller; 198 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 199 const struct dsps_musb_wrapper *wrp = glue->wrp; 200 void __iomem *reg_base = musb->ctrl_base; 201 202 musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap); 203 musb_writel(reg_base, wrp->epintr_clear, 204 wrp->txep_bitmap | wrp->rxep_bitmap); 205 del_timer_sync(&musb->dev_timer); 206 } 207 208 /* Caller must take musb->lock */ 209 static int dsps_check_status(struct musb *musb, void *unused) 210 { 211 void __iomem *mregs = musb->mregs; 212 struct device *dev = musb->controller; 213 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 214 const struct dsps_musb_wrapper *wrp = glue->wrp; 215 u8 devctl; 216 int skip_session = 0; 217 218 if (glue->vbus_irq) 219 del_timer(&musb->dev_timer); 220 221 /* 222 * We poll because DSPS IP's won't expose several OTG-critical 223 * status change events (from the transceiver) otherwise. 224 */ 225 devctl = musb_readb(mregs, MUSB_DEVCTL); 226 dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl, 227 usb_otg_state_string(musb->xceiv->otg->state)); 228 229 switch (musb->xceiv->otg->state) { 230 case OTG_STATE_A_WAIT_VRISE: 231 if (musb->port_mode == MUSB_HOST) { 232 musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; 233 dsps_mod_timer_optional(glue); 234 break; 235 } 236 fallthrough; 237 238 case OTG_STATE_A_WAIT_BCON: 239 /* keep VBUS on for host-only mode */ 240 if (musb->port_mode == MUSB_HOST) { 241 dsps_mod_timer_optional(glue); 242 break; 243 } 244 musb_writeb(musb->mregs, MUSB_DEVCTL, 0); 245 skip_session = 1; 246 fallthrough; 247 248 case OTG_STATE_A_IDLE: 249 case OTG_STATE_B_IDLE: 250 if (!glue->vbus_irq) { 251 if (devctl & MUSB_DEVCTL_BDEVICE) { 252 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 253 MUSB_DEV_MODE(musb); 254 } else { 255 musb->xceiv->otg->state = OTG_STATE_A_IDLE; 256 MUSB_HST_MODE(musb); 257 } 258 259 if (musb->port_mode == MUSB_PERIPHERAL) 260 skip_session = 1; 261 262 if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session) 263 musb_writeb(mregs, MUSB_DEVCTL, 264 MUSB_DEVCTL_SESSION); 265 } 266 dsps_mod_timer_optional(glue); 267 break; 268 case OTG_STATE_A_WAIT_VFALL: 269 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 270 musb_writel(musb->ctrl_base, wrp->coreintr_set, 271 MUSB_INTR_VBUSERROR << wrp->usb_shift); 272 break; 273 default: 274 break; 275 } 276 277 return 0; 278 } 279 280 static void otg_timer(struct timer_list *t) 281 { 282 struct musb *musb = from_timer(musb, t, dev_timer); 283 struct device *dev = musb->controller; 284 unsigned long flags; 285 int err; 286 287 err = pm_runtime_get(dev); 288 if ((err != -EINPROGRESS) && err < 0) { 289 dev_err(dev, "Poll could not pm_runtime_get: %i\n", err); 290 pm_runtime_put_noidle(dev); 291 292 return; 293 } 294 295 spin_lock_irqsave(&musb->lock, flags); 296 err = musb_queue_resume_work(musb, dsps_check_status, NULL); 297 if (err < 0) 298 dev_err(dev, "%s resume work: %i\n", __func__, err); 299 spin_unlock_irqrestore(&musb->lock, flags); 300 pm_runtime_mark_last_busy(dev); 301 pm_runtime_put_autosuspend(dev); 302 } 303 304 static void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum) 305 { 306 u32 epintr; 307 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); 308 const struct dsps_musb_wrapper *wrp = glue->wrp; 309 310 /* musb->lock might already been held */ 311 epintr = (1 << epnum) << wrp->rxep_shift; 312 musb_writel(musb->ctrl_base, wrp->epintr_status, epintr); 313 } 314 315 static irqreturn_t dsps_interrupt(int irq, void *hci) 316 { 317 struct musb *musb = hci; 318 void __iomem *reg_base = musb->ctrl_base; 319 struct device *dev = musb->controller; 320 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 321 const struct dsps_musb_wrapper *wrp = glue->wrp; 322 unsigned long flags; 323 irqreturn_t ret = IRQ_NONE; 324 u32 epintr, usbintr; 325 326 spin_lock_irqsave(&musb->lock, flags); 327 328 /* Get endpoint interrupts */ 329 epintr = musb_readl(reg_base, wrp->epintr_status); 330 musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift; 331 musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift; 332 333 if (epintr) 334 musb_writel(reg_base, wrp->epintr_status, epintr); 335 336 /* Get usb core interrupts */ 337 usbintr = musb_readl(reg_base, wrp->coreintr_status); 338 if (!usbintr && !epintr) 339 goto out; 340 341 musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift; 342 if (usbintr) 343 musb_writel(reg_base, wrp->coreintr_status, usbintr); 344 345 dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n", 346 usbintr, epintr); 347 348 if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) { 349 int drvvbus = musb_readl(reg_base, wrp->status); 350 void __iomem *mregs = musb->mregs; 351 u8 devctl = musb_readb(mregs, MUSB_DEVCTL); 352 int err; 353 354 err = musb->int_usb & MUSB_INTR_VBUSERROR; 355 if (err) { 356 /* 357 * The Mentor core doesn't debounce VBUS as needed 358 * to cope with device connect current spikes. This 359 * means it's not uncommon for bus-powered devices 360 * to get VBUS errors during enumeration. 361 * 362 * This is a workaround, but newer RTL from Mentor 363 * seems to allow a better one: "re"-starting sessions 364 * without waiting for VBUS to stop registering in 365 * devctl. 366 */ 367 musb->int_usb &= ~MUSB_INTR_VBUSERROR; 368 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL; 369 dsps_mod_timer_optional(glue); 370 WARNING("VBUS error workaround (delay coming)\n"); 371 } else if (drvvbus) { 372 MUSB_HST_MODE(musb); 373 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 374 dsps_mod_timer_optional(glue); 375 } else { 376 musb->is_active = 0; 377 MUSB_DEV_MODE(musb); 378 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 379 } 380 381 /* NOTE: this must complete power-on within 100 ms. */ 382 dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n", 383 drvvbus ? "on" : "off", 384 usb_otg_state_string(musb->xceiv->otg->state), 385 err ? " ERROR" : "", 386 devctl); 387 ret = IRQ_HANDLED; 388 } 389 390 if (musb->int_tx || musb->int_rx || musb->int_usb) 391 ret |= musb_interrupt(musb); 392 393 /* Poll for ID change and connect */ 394 switch (musb->xceiv->otg->state) { 395 case OTG_STATE_B_IDLE: 396 case OTG_STATE_A_WAIT_BCON: 397 dsps_mod_timer_optional(glue); 398 break; 399 default: 400 break; 401 } 402 403 out: 404 spin_unlock_irqrestore(&musb->lock, flags); 405 406 return ret; 407 } 408 409 static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue) 410 { 411 struct dentry *root; 412 char buf[128]; 413 414 sprintf(buf, "%s.dsps", dev_name(musb->controller)); 415 root = debugfs_create_dir(buf, usb_debug_root); 416 glue->dbgfs_root = root; 417 418 glue->regset.regs = dsps_musb_regs; 419 glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs); 420 glue->regset.base = musb->ctrl_base; 421 422 debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); 423 return 0; 424 } 425 426 static int dsps_musb_init(struct musb *musb) 427 { 428 struct device *dev = musb->controller; 429 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 430 struct platform_device *parent = to_platform_device(dev->parent); 431 const struct dsps_musb_wrapper *wrp = glue->wrp; 432 void __iomem *reg_base; 433 struct resource *r; 434 u32 rev, val; 435 int ret; 436 437 r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control"); 438 reg_base = devm_ioremap_resource(dev, r); 439 if (IS_ERR(reg_base)) 440 return PTR_ERR(reg_base); 441 musb->ctrl_base = reg_base; 442 443 /* NOP driver needs change if supporting dual instance */ 444 musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0); 445 if (IS_ERR(musb->xceiv)) 446 return PTR_ERR(musb->xceiv); 447 448 musb->phy = devm_phy_get(dev->parent, "usb2-phy"); 449 450 /* Returns zero if e.g. not clocked */ 451 rev = musb_readl(reg_base, wrp->revision); 452 if (!rev) 453 return -ENODEV; 454 455 if (IS_ERR(musb->phy)) { 456 musb->phy = NULL; 457 } else { 458 ret = phy_init(musb->phy); 459 if (ret < 0) 460 return ret; 461 ret = phy_power_on(musb->phy); 462 if (ret) { 463 phy_exit(musb->phy); 464 return ret; 465 } 466 } 467 468 timer_setup(&musb->dev_timer, otg_timer, 0); 469 470 /* Reset the musb */ 471 musb_writel(reg_base, wrp->control, (1 << wrp->reset)); 472 473 musb->isr = dsps_interrupt; 474 475 /* reset the otgdisable bit, needed for host mode to work */ 476 val = musb_readl(reg_base, wrp->phy_utmi); 477 val &= ~(1 << wrp->otg_disable); 478 musb_writel(musb->ctrl_base, wrp->phy_utmi, val); 479 480 /* 481 * Check whether the dsps version has babble control enabled. 482 * In latest silicon revision the babble control logic is enabled. 483 * If MUSB_BABBLE_CTL returns 0x4 then we have the babble control 484 * logic enabled. 485 */ 486 val = musb_readb(musb->mregs, MUSB_BABBLE_CTL); 487 if (val & MUSB_BABBLE_RCV_DISABLE) { 488 glue->sw_babble_enabled = true; 489 val |= MUSB_BABBLE_SW_SESSION_CTRL; 490 musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val); 491 } 492 493 dsps_mod_timer(glue, -1); 494 495 return dsps_musb_dbg_init(musb, glue); 496 } 497 498 static int dsps_musb_exit(struct musb *musb) 499 { 500 struct device *dev = musb->controller; 501 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 502 503 del_timer_sync(&musb->dev_timer); 504 phy_power_off(musb->phy); 505 phy_exit(musb->phy); 506 debugfs_remove_recursive(glue->dbgfs_root); 507 508 return 0; 509 } 510 511 static int dsps_musb_set_mode(struct musb *musb, u8 mode) 512 { 513 struct device *dev = musb->controller; 514 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 515 const struct dsps_musb_wrapper *wrp = glue->wrp; 516 void __iomem *ctrl_base = musb->ctrl_base; 517 u32 reg; 518 519 reg = musb_readl(ctrl_base, wrp->mode); 520 521 switch (mode) { 522 case MUSB_HOST: 523 reg &= ~(1 << wrp->iddig); 524 525 /* 526 * if we're setting mode to host-only or device-only, we're 527 * going to ignore whatever the PHY sends us and just force 528 * ID pin status by SW 529 */ 530 reg |= (1 << wrp->iddig_mux); 531 532 musb_writel(ctrl_base, wrp->mode, reg); 533 musb_writel(ctrl_base, wrp->phy_utmi, 0x02); 534 break; 535 case MUSB_PERIPHERAL: 536 reg |= (1 << wrp->iddig); 537 538 /* 539 * if we're setting mode to host-only or device-only, we're 540 * going to ignore whatever the PHY sends us and just force 541 * ID pin status by SW 542 */ 543 reg |= (1 << wrp->iddig_mux); 544 545 musb_writel(ctrl_base, wrp->mode, reg); 546 break; 547 case MUSB_OTG: 548 musb_writel(ctrl_base, wrp->phy_utmi, 0x02); 549 break; 550 default: 551 dev_err(glue->dev, "unsupported mode %d\n", mode); 552 return -EINVAL; 553 } 554 555 return 0; 556 } 557 558 static bool dsps_sw_babble_control(struct musb *musb) 559 { 560 u8 babble_ctl; 561 bool session_restart = false; 562 563 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL); 564 dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n", 565 babble_ctl); 566 /* 567 * check line monitor flag to check whether babble is 568 * due to noise 569 */ 570 dev_dbg(musb->controller, "STUCK_J is %s\n", 571 babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset"); 572 573 if (babble_ctl & MUSB_BABBLE_STUCK_J) { 574 int timeout = 10; 575 576 /* 577 * babble is due to noise, then set transmit idle (d7 bit) 578 * to resume normal operation 579 */ 580 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL); 581 babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE; 582 musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl); 583 584 /* wait till line monitor flag cleared */ 585 dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n"); 586 do { 587 babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL); 588 udelay(1); 589 } while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--); 590 591 /* check whether stuck_at_j bit cleared */ 592 if (babble_ctl & MUSB_BABBLE_STUCK_J) { 593 /* 594 * real babble condition has occurred 595 * restart the controller to start the 596 * session again 597 */ 598 dev_dbg(musb->controller, "J not cleared, misc (%x)\n", 599 babble_ctl); 600 session_restart = true; 601 } 602 } else { 603 session_restart = true; 604 } 605 606 return session_restart; 607 } 608 609 static int dsps_musb_recover(struct musb *musb) 610 { 611 struct device *dev = musb->controller; 612 struct dsps_glue *glue = dev_get_drvdata(dev->parent); 613 int session_restart = 0; 614 615 if (glue->sw_babble_enabled) 616 session_restart = dsps_sw_babble_control(musb); 617 else 618 session_restart = 1; 619 620 return session_restart ? 0 : -EPIPE; 621 } 622 623 /* Similar to am35x, dm81xx support only 32-bit read operation */ 624 static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) 625 { 626 void __iomem *fifo = hw_ep->fifo; 627 628 if (len >= 4) { 629 ioread32_rep(fifo, dst, len >> 2); 630 dst += len & ~0x03; 631 len &= 0x03; 632 } 633 634 /* Read any remaining 1 to 3 bytes */ 635 if (len > 0) { 636 u32 val = musb_readl(fifo, 0); 637 memcpy(dst, &val, len); 638 } 639 } 640 641 #ifdef CONFIG_USB_TI_CPPI41_DMA 642 static void dsps_dma_controller_callback(struct dma_controller *c) 643 { 644 struct musb *musb = c->musb; 645 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); 646 void __iomem *usbss_base = glue->usbss_base; 647 u32 status; 648 649 status = musb_readl(usbss_base, USBSS_IRQ_STATUS); 650 if (status & USBSS_IRQ_PD_COMP) 651 musb_writel(usbss_base, USBSS_IRQ_STATUS, USBSS_IRQ_PD_COMP); 652 } 653 654 static struct dma_controller * 655 dsps_dma_controller_create(struct musb *musb, void __iomem *base) 656 { 657 struct dma_controller *controller; 658 struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); 659 void __iomem *usbss_base = glue->usbss_base; 660 661 controller = cppi41_dma_controller_create(musb, base); 662 if (IS_ERR_OR_NULL(controller)) 663 return controller; 664 665 musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP); 666 controller->dma_callback = dsps_dma_controller_callback; 667 668 return controller; 669 } 670 671 #ifdef CONFIG_PM_SLEEP 672 static void dsps_dma_controller_suspend(struct dsps_glue *glue) 673 { 674 void __iomem *usbss_base = glue->usbss_base; 675 676 musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP); 677 } 678 679 static void dsps_dma_controller_resume(struct dsps_glue *glue) 680 { 681 void __iomem *usbss_base = glue->usbss_base; 682 683 musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP); 684 } 685 #endif 686 #else /* CONFIG_USB_TI_CPPI41_DMA */ 687 #ifdef CONFIG_PM_SLEEP 688 static void dsps_dma_controller_suspend(struct dsps_glue *glue) {} 689 static void dsps_dma_controller_resume(struct dsps_glue *glue) {} 690 #endif 691 #endif /* CONFIG_USB_TI_CPPI41_DMA */ 692 693 static struct musb_platform_ops dsps_ops = { 694 .quirks = MUSB_DMA_CPPI41 | MUSB_INDEXED_EP, 695 .init = dsps_musb_init, 696 .exit = dsps_musb_exit, 697 698 #ifdef CONFIG_USB_TI_CPPI41_DMA 699 .dma_init = dsps_dma_controller_create, 700 .dma_exit = cppi41_dma_controller_destroy, 701 #endif 702 .enable = dsps_musb_enable, 703 .disable = dsps_musb_disable, 704 705 .set_mode = dsps_musb_set_mode, 706 .recover = dsps_musb_recover, 707 .clear_ep_rxintr = dsps_musb_clear_ep_rxintr, 708 }; 709 710 static u64 musb_dmamask = DMA_BIT_MASK(32); 711 712 static int get_int_prop(struct device_node *dn, const char *s) 713 { 714 int ret; 715 u32 val; 716 717 ret = of_property_read_u32(dn, s, &val); 718 if (ret) 719 return 0; 720 return val; 721 } 722 723 static int dsps_create_musb_pdev(struct dsps_glue *glue, 724 struct platform_device *parent) 725 { 726 struct musb_hdrc_platform_data pdata; 727 struct resource resources[2]; 728 struct resource *res; 729 struct device *dev = &parent->dev; 730 struct musb_hdrc_config *config; 731 struct platform_device *musb; 732 struct device_node *dn = parent->dev.of_node; 733 int ret, val; 734 735 memset(resources, 0, sizeof(resources)); 736 res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc"); 737 if (!res) { 738 dev_err(dev, "failed to get memory.\n"); 739 return -EINVAL; 740 } 741 resources[0] = *res; 742 743 ret = platform_get_irq_byname(parent, "mc"); 744 if (ret < 0) 745 return ret; 746 747 resources[1].start = ret; 748 resources[1].end = ret; 749 resources[1].flags = IORESOURCE_IRQ | irq_get_trigger_type(ret); 750 resources[1].name = "mc"; 751 752 /* allocate the child platform device */ 753 musb = platform_device_alloc("musb-hdrc", 754 (resources[0].start & 0xFFF) == 0x400 ? 0 : 1); 755 if (!musb) { 756 dev_err(dev, "failed to allocate musb device\n"); 757 return -ENOMEM; 758 } 759 760 musb->dev.parent = dev; 761 musb->dev.dma_mask = &musb_dmamask; 762 musb->dev.coherent_dma_mask = musb_dmamask; 763 device_set_of_node_from_dev(&musb->dev, &parent->dev); 764 765 glue->musb = musb; 766 767 ret = platform_device_add_resources(musb, resources, 768 ARRAY_SIZE(resources)); 769 if (ret) { 770 dev_err(dev, "failed to add resources\n"); 771 goto err; 772 } 773 774 config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL); 775 if (!config) { 776 ret = -ENOMEM; 777 goto err; 778 } 779 pdata.config = config; 780 pdata.platform_ops = &dsps_ops; 781 782 config->num_eps = get_int_prop(dn, "mentor,num-eps"); 783 config->ram_bits = get_int_prop(dn, "mentor,ram-bits"); 784 config->host_port_deassert_reset_at_resume = 1; 785 pdata.mode = musb_get_mode(dev); 786 /* DT keeps this entry in mA, musb expects it as per USB spec */ 787 pdata.power = get_int_prop(dn, "mentor,power") / 2; 788 789 ret = of_property_read_u32(dn, "mentor,multipoint", &val); 790 if (!ret && val) 791 config->multipoint = true; 792 793 config->maximum_speed = usb_get_maximum_speed(&parent->dev); 794 switch (config->maximum_speed) { 795 case USB_SPEED_LOW: 796 case USB_SPEED_FULL: 797 break; 798 case USB_SPEED_SUPER: 799 dev_warn(dev, "ignore incorrect maximum_speed " 800 "(super-speed) setting in dts"); 801 fallthrough; 802 default: 803 config->maximum_speed = USB_SPEED_HIGH; 804 } 805 806 ret = platform_device_add_data(musb, &pdata, sizeof(pdata)); 807 if (ret) { 808 dev_err(dev, "failed to add platform_data\n"); 809 goto err; 810 } 811 812 ret = platform_device_add(musb); 813 if (ret) { 814 dev_err(dev, "failed to register musb device\n"); 815 goto err; 816 } 817 return 0; 818 819 err: 820 platform_device_put(musb); 821 return ret; 822 } 823 824 static irqreturn_t dsps_vbus_threaded_irq(int irq, void *priv) 825 { 826 struct dsps_glue *glue = priv; 827 struct musb *musb = platform_get_drvdata(glue->musb); 828 829 if (!musb) 830 return IRQ_NONE; 831 832 dev_dbg(glue->dev, "VBUS interrupt\n"); 833 dsps_mod_timer(glue, 0); 834 835 return IRQ_HANDLED; 836 } 837 838 static int dsps_setup_optional_vbus_irq(struct platform_device *pdev, 839 struct dsps_glue *glue) 840 { 841 int error; 842 843 glue->vbus_irq = platform_get_irq_byname(pdev, "vbus"); 844 if (glue->vbus_irq == -EPROBE_DEFER) 845 return -EPROBE_DEFER; 846 847 if (glue->vbus_irq <= 0) { 848 glue->vbus_irq = 0; 849 return 0; 850 } 851 852 error = devm_request_threaded_irq(glue->dev, glue->vbus_irq, 853 NULL, dsps_vbus_threaded_irq, 854 IRQF_ONESHOT, 855 "vbus", glue); 856 if (error) { 857 glue->vbus_irq = 0; 858 return error; 859 } 860 dev_dbg(glue->dev, "VBUS irq %i configured\n", glue->vbus_irq); 861 862 return 0; 863 } 864 865 static int dsps_probe(struct platform_device *pdev) 866 { 867 const struct of_device_id *match; 868 const struct dsps_musb_wrapper *wrp; 869 struct dsps_glue *glue; 870 int ret; 871 872 if (!strcmp(pdev->name, "musb-hdrc")) 873 return -ENODEV; 874 875 match = of_match_node(musb_dsps_of_match, pdev->dev.of_node); 876 if (!match) { 877 dev_err(&pdev->dev, "fail to get matching of_match struct\n"); 878 return -EINVAL; 879 } 880 wrp = match->data; 881 882 if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816")) 883 dsps_ops.read_fifo = dsps_read_fifo32; 884 885 /* allocate glue */ 886 glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); 887 if (!glue) 888 return -ENOMEM; 889 890 glue->dev = &pdev->dev; 891 glue->wrp = wrp; 892 glue->usbss_base = of_iomap(pdev->dev.parent->of_node, 0); 893 if (!glue->usbss_base) 894 return -ENXIO; 895 896 platform_set_drvdata(pdev, glue); 897 pm_runtime_enable(&pdev->dev); 898 ret = dsps_create_musb_pdev(glue, pdev); 899 if (ret) 900 goto err; 901 902 if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) { 903 ret = dsps_setup_optional_vbus_irq(pdev, glue); 904 if (ret) 905 goto unregister_pdev; 906 } 907 908 return 0; 909 910 unregister_pdev: 911 platform_device_unregister(glue->musb); 912 err: 913 pm_runtime_disable(&pdev->dev); 914 iounmap(glue->usbss_base); 915 return ret; 916 } 917 918 static void dsps_remove(struct platform_device *pdev) 919 { 920 struct dsps_glue *glue = platform_get_drvdata(pdev); 921 922 platform_device_unregister(glue->musb); 923 924 pm_runtime_disable(&pdev->dev); 925 iounmap(glue->usbss_base); 926 } 927 928 static const struct dsps_musb_wrapper am33xx_driver_data = { 929 .revision = 0x00, 930 .control = 0x14, 931 .status = 0x18, 932 .epintr_set = 0x38, 933 .epintr_clear = 0x40, 934 .epintr_status = 0x30, 935 .coreintr_set = 0x3c, 936 .coreintr_clear = 0x44, 937 .coreintr_status = 0x34, 938 .phy_utmi = 0xe0, 939 .mode = 0xe8, 940 .tx_mode = 0x70, 941 .rx_mode = 0x74, 942 .reset = 0, 943 .otg_disable = 21, 944 .iddig = 8, 945 .iddig_mux = 7, 946 .usb_shift = 0, 947 .usb_mask = 0x1ff, 948 .usb_bitmap = (0x1ff << 0), 949 .drvvbus = 8, 950 .txep_shift = 0, 951 .txep_mask = 0xffff, 952 .txep_bitmap = (0xffff << 0), 953 .rxep_shift = 16, 954 .rxep_mask = 0xfffe, 955 .rxep_bitmap = (0xfffe << 16), 956 .poll_timeout = 2000, /* ms */ 957 }; 958 959 static const struct of_device_id musb_dsps_of_match[] = { 960 { .compatible = "ti,musb-am33xx", 961 .data = &am33xx_driver_data, }, 962 { .compatible = "ti,musb-dm816", 963 .data = &am33xx_driver_data, }, 964 { }, 965 }; 966 MODULE_DEVICE_TABLE(of, musb_dsps_of_match); 967 968 #ifdef CONFIG_PM_SLEEP 969 static int dsps_suspend(struct device *dev) 970 { 971 struct dsps_glue *glue = dev_get_drvdata(dev); 972 const struct dsps_musb_wrapper *wrp = glue->wrp; 973 struct musb *musb = platform_get_drvdata(glue->musb); 974 void __iomem *mbase; 975 int ret; 976 977 if (!musb) 978 /* This can happen if the musb device is in -EPROBE_DEFER */ 979 return 0; 980 981 ret = pm_runtime_get_sync(dev); 982 if (ret < 0) { 983 pm_runtime_put_noidle(dev); 984 return ret; 985 } 986 987 del_timer_sync(&musb->dev_timer); 988 989 mbase = musb->ctrl_base; 990 glue->context.control = musb_readl(mbase, wrp->control); 991 glue->context.epintr = musb_readl(mbase, wrp->epintr_set); 992 glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set); 993 glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi); 994 glue->context.mode = musb_readl(mbase, wrp->mode); 995 glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode); 996 glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode); 997 998 dsps_dma_controller_suspend(glue); 999 1000 return 0; 1001 } 1002 1003 static int dsps_resume(struct device *dev) 1004 { 1005 struct dsps_glue *glue = dev_get_drvdata(dev); 1006 const struct dsps_musb_wrapper *wrp = glue->wrp; 1007 struct musb *musb = platform_get_drvdata(glue->musb); 1008 void __iomem *mbase; 1009 1010 if (!musb) 1011 return 0; 1012 1013 dsps_dma_controller_resume(glue); 1014 1015 mbase = musb->ctrl_base; 1016 musb_writel(mbase, wrp->control, glue->context.control); 1017 musb_writel(mbase, wrp->epintr_set, glue->context.epintr); 1018 musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr); 1019 musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi); 1020 musb_writel(mbase, wrp->mode, glue->context.mode); 1021 musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode); 1022 musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode); 1023 if (musb->xceiv->otg->state == OTG_STATE_B_IDLE && 1024 musb->port_mode == MUSB_OTG) 1025 dsps_mod_timer(glue, -1); 1026 1027 pm_runtime_put(dev); 1028 1029 return 0; 1030 } 1031 #endif 1032 1033 static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume); 1034 1035 static struct platform_driver dsps_usbss_driver = { 1036 .probe = dsps_probe, 1037 .remove_new = dsps_remove, 1038 .driver = { 1039 .name = "musb-dsps", 1040 .pm = &dsps_pm_ops, 1041 .of_match_table = musb_dsps_of_match, 1042 }, 1043 }; 1044 1045 MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer"); 1046 MODULE_AUTHOR("Ravi B <ravibabu@ti.com>"); 1047 MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>"); 1048 MODULE_LICENSE("GPL v2"); 1049 1050 module_platform_driver(dsps_usbss_driver); 1051