xref: /openbmc/linux/drivers/usb/musb/musb_dma.h (revision 479965a2)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * MUSB OTG driver DMA controller abstraction
4  *
5  * Copyright 2005 Mentor Graphics Corporation
6  * Copyright (C) 2005-2006 by Texas Instruments
7  * Copyright (C) 2006-2007 Nokia Corporation
8  */
9 
10 #ifndef __MUSB_DMA_H__
11 #define __MUSB_DMA_H__
12 
13 struct musb_hw_ep;
14 
15 /*
16  * DMA Controller Abstraction
17  *
18  * DMA Controllers are abstracted to allow use of a variety of different
19  * implementations of DMA, as allowed by the Inventra USB cores.  On the
20  * host side, usbcore sets up the DMA mappings and flushes caches; on the
21  * peripheral side, the gadget controller driver does.  Responsibilities
22  * of a DMA controller driver include:
23  *
24  *  - Handling the details of moving multiple USB packets
25  *    in cooperation with the Inventra USB core, including especially
26  *    the correct RX side treatment of short packets and buffer-full
27  *    states (both of which terminate transfers).
28  *
29  *  - Knowing the correlation between dma channels and the
30  *    Inventra core's local endpoint resources and data direction.
31  *
32  *  - Maintaining a list of allocated/available channels.
33  *
34  *  - Updating channel status on interrupts,
35  *    whether shared with the Inventra core or separate.
36  */
37 
38 #define MUSB_HSDMA_BASE		0x200
39 #define MUSB_HSDMA_INTR		(MUSB_HSDMA_BASE + 0)
40 #define MUSB_HSDMA_CONTROL	0x4
41 #define MUSB_HSDMA_ADDRESS	0x8
42 #define MUSB_HSDMA_COUNT	0xc
43 
44 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
45 
46 #ifdef CONFIG_MUSB_PIO_ONLY
47 #define	is_dma_capable()	(0)
48 #else
49 #define	is_dma_capable()	(1)
50 #endif
51 
52 #ifdef CONFIG_USB_UX500_DMA
53 #define musb_dma_ux500(musb)		(musb->ops->quirks & MUSB_DMA_UX500)
54 #else
55 #define musb_dma_ux500(musb)		0
56 #endif
57 
58 #ifdef CONFIG_USB_TI_CPPI41_DMA
59 #define musb_dma_cppi41(musb)		(musb->ops->quirks & MUSB_DMA_CPPI41)
60 #else
61 #define musb_dma_cppi41(musb)		0
62 #endif
63 
64 #ifdef CONFIG_USB_TUSB_OMAP_DMA
65 #define tusb_dma_omap(musb)		(musb->ops->quirks & MUSB_DMA_TUSB_OMAP)
66 #else
67 #define tusb_dma_omap(musb)		0
68 #endif
69 
70 #ifdef CONFIG_USB_INVENTRA_DMA
71 #define musb_dma_inventra(musb)		(musb->ops->quirks & MUSB_DMA_INVENTRA)
72 #else
73 #define musb_dma_inventra(musb)		0
74 #endif
75 
76 #if defined(CONFIG_USB_TI_CPPI41_DMA)
77 #define	is_cppi_enabled(musb)		musb_dma_cppi41(musb)
78 #else
79 #define	is_cppi_enabled(musb)		0
80 #endif
81 
82 /*
83  * DMA channel status ... updated by the dma controller driver whenever that
84  * status changes, and protected by the overall controller spinlock.
85  */
86 enum dma_channel_status {
87 	/* unallocated */
88 	MUSB_DMA_STATUS_UNKNOWN,
89 	/* allocated ... but not busy, no errors */
90 	MUSB_DMA_STATUS_FREE,
91 	/* busy ... transactions are active */
92 	MUSB_DMA_STATUS_BUSY,
93 	/* transaction(s) aborted due to ... dma or memory bus error */
94 	MUSB_DMA_STATUS_BUS_ABORT,
95 	/* transaction(s) aborted due to ... core error or USB fault */
96 	MUSB_DMA_STATUS_CORE_ABORT
97 };
98 
99 struct dma_controller;
100 
101 /**
102  * struct dma_channel - A DMA channel.
103  * @private_data: channel-private data
104  * @max_len: the maximum number of bytes the channel can move in one
105  *	transaction (typically representing many USB maximum-sized packets)
106  * @actual_len: how many bytes have been transferred
107  * @status: current channel status (updated e.g. on interrupt)
108  * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
109  *
110  * channels are associated with an endpoint for the duration of at least
111  * one usb transfer.
112  */
113 struct dma_channel {
114 	void			*private_data;
115 	/* FIXME not void* private_data, but a dma_controller * */
116 	size_t			max_len;
117 	size_t			actual_len;
118 	enum dma_channel_status	status;
119 	bool			desired_mode;
120 	bool			rx_packet_done;
121 };
122 
123 /*
124  * dma_channel_status - return status of dma channel
125  * @c: the channel
126  *
127  * Returns the software's view of the channel status.  If that status is BUSY
128  * then it's possible that the hardware has completed (or aborted) a transfer,
129  * so the driver needs to update that status.
130  */
131 static inline enum dma_channel_status
132 dma_channel_status(struct dma_channel *c)
133 {
134 	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
135 }
136 
137 /**
138  * struct dma_controller - A DMA Controller.
139  * @musb: the usb controller
140  * @start: call this to start a DMA controller;
141  *	return 0 on success, else negative errno
142  * @stop: call this to stop a DMA controller
143  *	return 0 on success, else negative errno
144  * @channel_alloc: call this to allocate a DMA channel
145  * @channel_release: call this to release a DMA channel
146  * @channel_abort: call this to abort a pending DMA transaction,
147  *	returning it to FREE (but allocated) state
148  * @dma_callback: invoked on DMA completion, useful to run platform
149  *	code such IRQ acknowledgment.
150  *
151  * Controllers manage dma channels.
152  */
153 struct dma_controller {
154 	struct musb *musb;
155 	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
156 					struct musb_hw_ep *, u8 is_tx);
157 	void			(*channel_release)(struct dma_channel *);
158 	int			(*channel_program)(struct dma_channel *channel,
159 							u16 maxpacket, u8 mode,
160 							dma_addr_t dma_addr,
161 							u32 length);
162 	int			(*channel_abort)(struct dma_channel *);
163 	int			(*is_compatible)(struct dma_channel *channel,
164 							u16 maxpacket,
165 							void *buf, u32 length);
166 	void			(*dma_callback)(struct dma_controller *);
167 };
168 
169 /* called after channel_program(), may indicate a fault */
170 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
171 
172 #ifdef CONFIG_MUSB_PIO_ONLY
173 static inline struct dma_controller *
174 musb_dma_controller_create(struct musb *m, void __iomem *io)
175 {
176 	return NULL;
177 }
178 
179 static inline void musb_dma_controller_destroy(struct dma_controller *d) { }
180 
181 #else
182 
183 extern struct dma_controller *
184 (*musb_dma_controller_create)(struct musb *, void __iomem *);
185 
186 extern void (*musb_dma_controller_destroy)(struct dma_controller *);
187 #endif
188 
189 /* Platform specific DMA functions */
190 extern struct dma_controller *
191 musbhs_dma_controller_create(struct musb *musb, void __iomem *base);
192 extern void musbhs_dma_controller_destroy(struct dma_controller *c);
193 extern struct dma_controller *
194 musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base);
195 extern irqreturn_t dma_controller_irq(int irq, void *private_data);
196 
197 extern struct dma_controller *
198 tusb_dma_controller_create(struct musb *musb, void __iomem *base);
199 extern void tusb_dma_controller_destroy(struct dma_controller *c);
200 
201 extern struct dma_controller *
202 cppi41_dma_controller_create(struct musb *musb, void __iomem *base);
203 extern void cppi41_dma_controller_destroy(struct dma_controller *c);
204 
205 extern struct dma_controller *
206 ux500_dma_controller_create(struct musb *musb, void __iomem *base);
207 extern void ux500_dma_controller_destroy(struct dma_controller *c);
208 
209 #endif	/* __MUSB_DMA_H__ */
210