1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * MUSB OTG driver DMA controller abstraction 4 * 5 * Copyright 2005 Mentor Graphics Corporation 6 * Copyright (C) 2005-2006 by Texas Instruments 7 * Copyright (C) 2006-2007 Nokia Corporation 8 */ 9 10 #ifndef __MUSB_DMA_H__ 11 #define __MUSB_DMA_H__ 12 13 struct musb_hw_ep; 14 15 /* 16 * DMA Controller Abstraction 17 * 18 * DMA Controllers are abstracted to allow use of a variety of different 19 * implementations of DMA, as allowed by the Inventra USB cores. On the 20 * host side, usbcore sets up the DMA mappings and flushes caches; on the 21 * peripheral side, the gadget controller driver does. Responsibilities 22 * of a DMA controller driver include: 23 * 24 * - Handling the details of moving multiple USB packets 25 * in cooperation with the Inventra USB core, including especially 26 * the correct RX side treatment of short packets and buffer-full 27 * states (both of which terminate transfers). 28 * 29 * - Knowing the correlation between dma channels and the 30 * Inventra core's local endpoint resources and data direction. 31 * 32 * - Maintaining a list of allocated/available channels. 33 * 34 * - Updating channel status on interrupts, 35 * whether shared with the Inventra core or separate. 36 */ 37 38 #define MUSB_HSDMA_BASE 0x200 39 #define MUSB_HSDMA_INTR (MUSB_HSDMA_BASE + 0) 40 #define MUSB_HSDMA_CONTROL 0x4 41 #define MUSB_HSDMA_ADDRESS 0x8 42 #define MUSB_HSDMA_COUNT 0xc 43 44 #define DMA_ADDR_INVALID (~(dma_addr_t)0) 45 46 #ifdef CONFIG_MUSB_PIO_ONLY 47 #define is_dma_capable() (0) 48 #else 49 #define is_dma_capable() (1) 50 #endif 51 52 #ifdef CONFIG_USB_UX500_DMA 53 #define musb_dma_ux500(musb) (musb->ops->quirks & MUSB_DMA_UX500) 54 #else 55 #define musb_dma_ux500(musb) 0 56 #endif 57 58 #ifdef CONFIG_USB_TI_CPPI41_DMA 59 #define musb_dma_cppi41(musb) (musb->ops->quirks & MUSB_DMA_CPPI41) 60 #else 61 #define musb_dma_cppi41(musb) 0 62 #endif 63 64 #ifdef CONFIG_USB_TI_CPPI_DMA 65 #define musb_dma_cppi(musb) (musb->ops->quirks & MUSB_DMA_CPPI) 66 #else 67 #define musb_dma_cppi(musb) 0 68 #endif 69 70 #ifdef CONFIG_USB_TUSB_OMAP_DMA 71 #define tusb_dma_omap(musb) (musb->ops->quirks & MUSB_DMA_TUSB_OMAP) 72 #else 73 #define tusb_dma_omap(musb) 0 74 #endif 75 76 #ifdef CONFIG_USB_INVENTRA_DMA 77 #define musb_dma_inventra(musb) (musb->ops->quirks & MUSB_DMA_INVENTRA) 78 #else 79 #define musb_dma_inventra(musb) 0 80 #endif 81 82 #if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA) 83 #define is_cppi_enabled(musb) \ 84 (musb_dma_cppi(musb) || musb_dma_cppi41(musb)) 85 #else 86 #define is_cppi_enabled(musb) 0 87 #endif 88 89 /* 90 * DMA channel status ... updated by the dma controller driver whenever that 91 * status changes, and protected by the overall controller spinlock. 92 */ 93 enum dma_channel_status { 94 /* unallocated */ 95 MUSB_DMA_STATUS_UNKNOWN, 96 /* allocated ... but not busy, no errors */ 97 MUSB_DMA_STATUS_FREE, 98 /* busy ... transactions are active */ 99 MUSB_DMA_STATUS_BUSY, 100 /* transaction(s) aborted due to ... dma or memory bus error */ 101 MUSB_DMA_STATUS_BUS_ABORT, 102 /* transaction(s) aborted due to ... core error or USB fault */ 103 MUSB_DMA_STATUS_CORE_ABORT 104 }; 105 106 struct dma_controller; 107 108 /** 109 * struct dma_channel - A DMA channel. 110 * @private_data: channel-private data 111 * @max_len: the maximum number of bytes the channel can move in one 112 * transaction (typically representing many USB maximum-sized packets) 113 * @actual_len: how many bytes have been transferred 114 * @status: current channel status (updated e.g. on interrupt) 115 * @desired_mode: true if mode 1 is desired; false if mode 0 is desired 116 * 117 * channels are associated with an endpoint for the duration of at least 118 * one usb transfer. 119 */ 120 struct dma_channel { 121 void *private_data; 122 /* FIXME not void* private_data, but a dma_controller * */ 123 size_t max_len; 124 size_t actual_len; 125 enum dma_channel_status status; 126 bool desired_mode; 127 bool rx_packet_done; 128 }; 129 130 /* 131 * dma_channel_status - return status of dma channel 132 * @c: the channel 133 * 134 * Returns the software's view of the channel status. If that status is BUSY 135 * then it's possible that the hardware has completed (or aborted) a transfer, 136 * so the driver needs to update that status. 137 */ 138 static inline enum dma_channel_status 139 dma_channel_status(struct dma_channel *c) 140 { 141 return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN; 142 } 143 144 /** 145 * struct dma_controller - A DMA Controller. 146 * @musb: the usb controller 147 * @start: call this to start a DMA controller; 148 * return 0 on success, else negative errno 149 * @stop: call this to stop a DMA controller 150 * return 0 on success, else negative errno 151 * @channel_alloc: call this to allocate a DMA channel 152 * @channel_release: call this to release a DMA channel 153 * @channel_abort: call this to abort a pending DMA transaction, 154 * returning it to FREE (but allocated) state 155 * @dma_callback: invoked on DMA completion, useful to run platform 156 * code such IRQ acknowledgment. 157 * 158 * Controllers manage dma channels. 159 */ 160 struct dma_controller { 161 struct musb *musb; 162 struct dma_channel *(*channel_alloc)(struct dma_controller *, 163 struct musb_hw_ep *, u8 is_tx); 164 void (*channel_release)(struct dma_channel *); 165 int (*channel_program)(struct dma_channel *channel, 166 u16 maxpacket, u8 mode, 167 dma_addr_t dma_addr, 168 u32 length); 169 int (*channel_abort)(struct dma_channel *); 170 int (*is_compatible)(struct dma_channel *channel, 171 u16 maxpacket, 172 void *buf, u32 length); 173 void (*dma_callback)(struct dma_controller *); 174 }; 175 176 /* called after channel_program(), may indicate a fault */ 177 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit); 178 179 #ifdef CONFIG_MUSB_PIO_ONLY 180 static inline struct dma_controller * 181 musb_dma_controller_create(struct musb *m, void __iomem *io) 182 { 183 return NULL; 184 } 185 186 static inline void musb_dma_controller_destroy(struct dma_controller *d) { } 187 188 #else 189 190 extern struct dma_controller * 191 (*musb_dma_controller_create)(struct musb *, void __iomem *); 192 193 extern void (*musb_dma_controller_destroy)(struct dma_controller *); 194 #endif 195 196 /* Platform specific DMA functions */ 197 extern struct dma_controller * 198 musbhs_dma_controller_create(struct musb *musb, void __iomem *base); 199 extern void musbhs_dma_controller_destroy(struct dma_controller *c); 200 extern struct dma_controller * 201 musbhs_dma_controller_create_noirq(struct musb *musb, void __iomem *base); 202 extern irqreturn_t dma_controller_irq(int irq, void *private_data); 203 204 extern struct dma_controller * 205 tusb_dma_controller_create(struct musb *musb, void __iomem *base); 206 extern void tusb_dma_controller_destroy(struct dma_controller *c); 207 208 extern struct dma_controller * 209 cppi_dma_controller_create(struct musb *musb, void __iomem *base); 210 extern void cppi_dma_controller_destroy(struct dma_controller *c); 211 212 extern struct dma_controller * 213 cppi41_dma_controller_create(struct musb *musb, void __iomem *base); 214 extern void cppi41_dma_controller_destroy(struct dma_controller *c); 215 216 extern struct dma_controller * 217 ux500_dma_controller_create(struct musb *musb, void __iomem *base); 218 extern void ux500_dma_controller_destroy(struct dma_controller *c); 219 220 #endif /* __MUSB_DMA_H__ */ 221