xref: /openbmc/linux/drivers/usb/musb/musb_dma.h (revision 13d1cf7e)
1 /*
2  * MUSB OTG driver DMA controller abstraction
3  *
4  * Copyright 2005 Mentor Graphics Corporation
5  * Copyright (C) 2005-2006 by Texas Instruments
6  * Copyright (C) 2006-2007 Nokia Corporation
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
23  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
24  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
25  * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
26  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
28  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
29  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  *
33  */
34 
35 #ifndef __MUSB_DMA_H__
36 #define __MUSB_DMA_H__
37 
38 struct musb_hw_ep;
39 
40 /*
41  * DMA Controller Abstraction
42  *
43  * DMA Controllers are abstracted to allow use of a variety of different
44  * implementations of DMA, as allowed by the Inventra USB cores.  On the
45  * host side, usbcore sets up the DMA mappings and flushes caches; on the
46  * peripheral side, the gadget controller driver does.  Responsibilities
47  * of a DMA controller driver include:
48  *
49  *  - Handling the details of moving multiple USB packets
50  *    in cooperation with the Inventra USB core, including especially
51  *    the correct RX side treatment of short packets and buffer-full
52  *    states (both of which terminate transfers).
53  *
54  *  - Knowing the correlation between dma channels and the
55  *    Inventra core's local endpoint resources and data direction.
56  *
57  *  - Maintaining a list of allocated/available channels.
58  *
59  *  - Updating channel status on interrupts,
60  *    whether shared with the Inventra core or separate.
61  */
62 
63 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
64 
65 #ifdef CONFIG_MUSB_PIO_ONLY
66 #define	is_dma_capable()	(0)
67 #else
68 #define	is_dma_capable()	(1)
69 #endif
70 
71 #if defined(CONFIG_USB_TI_CPPI_DMA) || defined(CONFIG_USB_TI_CPPI41_DMA)
72 #define	is_cppi_enabled()	1
73 #else
74 #define	is_cppi_enabled()	0
75 #endif
76 
77 #ifdef CONFIG_USB_TUSB_OMAP_DMA
78 #define tusb_dma_omap()			1
79 #else
80 #define tusb_dma_omap()			0
81 #endif
82 
83 /* Anomaly 05000456 - USB Receive Interrupt Is Not Generated in DMA Mode 1
84  *	Only allow DMA mode 1 to be used when the USB will actually generate the
85  *	interrupts we expect.
86  */
87 #ifdef CONFIG_BLACKFIN
88 # undef USE_MODE1
89 # if !ANOMALY_05000456
90 #  define USE_MODE1
91 # endif
92 #endif
93 
94 /*
95  * DMA channel status ... updated by the dma controller driver whenever that
96  * status changes, and protected by the overall controller spinlock.
97  */
98 enum dma_channel_status {
99 	/* unallocated */
100 	MUSB_DMA_STATUS_UNKNOWN,
101 	/* allocated ... but not busy, no errors */
102 	MUSB_DMA_STATUS_FREE,
103 	/* busy ... transactions are active */
104 	MUSB_DMA_STATUS_BUSY,
105 	/* transaction(s) aborted due to ... dma or memory bus error */
106 	MUSB_DMA_STATUS_BUS_ABORT,
107 	/* transaction(s) aborted due to ... core error or USB fault */
108 	MUSB_DMA_STATUS_CORE_ABORT
109 };
110 
111 struct dma_controller;
112 
113 /**
114  * struct dma_channel - A DMA channel.
115  * @private_data: channel-private data
116  * @max_len: the maximum number of bytes the channel can move in one
117  *	transaction (typically representing many USB maximum-sized packets)
118  * @actual_len: how many bytes have been transferred
119  * @status: current channel status (updated e.g. on interrupt)
120  * @desired_mode: true if mode 1 is desired; false if mode 0 is desired
121  *
122  * channels are associated with an endpoint for the duration of at least
123  * one usb transfer.
124  */
125 struct dma_channel {
126 	void			*private_data;
127 	/* FIXME not void* private_data, but a dma_controller * */
128 	size_t			max_len;
129 	size_t			actual_len;
130 	enum dma_channel_status	status;
131 	bool			desired_mode;
132 	bool			rx_packet_done;
133 };
134 
135 /*
136  * dma_channel_status - return status of dma channel
137  * @c: the channel
138  *
139  * Returns the software's view of the channel status.  If that status is BUSY
140  * then it's possible that the hardware has completed (or aborted) a transfer,
141  * so the driver needs to update that status.
142  */
143 static inline enum dma_channel_status
144 dma_channel_status(struct dma_channel *c)
145 {
146 	return (is_dma_capable() && c) ? c->status : MUSB_DMA_STATUS_UNKNOWN;
147 }
148 
149 /**
150  * struct dma_controller - A DMA Controller.
151  * @start: call this to start a DMA controller;
152  *	return 0 on success, else negative errno
153  * @stop: call this to stop a DMA controller
154  *	return 0 on success, else negative errno
155  * @channel_alloc: call this to allocate a DMA channel
156  * @channel_release: call this to release a DMA channel
157  * @channel_abort: call this to abort a pending DMA transaction,
158  *	returning it to FREE (but allocated) state
159  *
160  * Controllers manage dma channels.
161  */
162 struct dma_controller {
163 	struct dma_channel	*(*channel_alloc)(struct dma_controller *,
164 					struct musb_hw_ep *, u8 is_tx);
165 	void			(*channel_release)(struct dma_channel *);
166 	int			(*channel_program)(struct dma_channel *channel,
167 							u16 maxpacket, u8 mode,
168 							dma_addr_t dma_addr,
169 							u32 length);
170 	int			(*channel_abort)(struct dma_channel *);
171 	int			(*is_compatible)(struct dma_channel *channel,
172 							u16 maxpacket,
173 							void *buf, u32 length);
174 };
175 
176 /* called after channel_program(), may indicate a fault */
177 extern void musb_dma_completion(struct musb *musb, u8 epnum, u8 transmit);
178 
179 #ifdef CONFIG_MUSB_PIO_ONLY
180 static inline struct dma_controller *dma_controller_create(struct musb *m,
181 		void __iomem *io)
182 {
183 	return NULL;
184 }
185 
186 static inline void dma_controller_destroy(struct dma_controller *d) { }
187 
188 #else
189 
190 extern struct dma_controller *dma_controller_create(struct musb *, void __iomem *);
191 
192 extern void dma_controller_destroy(struct dma_controller *);
193 #endif
194 
195 #endif	/* __MUSB_DMA_H__ */
196