1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * PolarFire SoC (MPFS) MUSB Glue Layer 4 * 5 * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved. 6 * Based on {omap2430,tusb6010,ux500}.c 7 * 8 */ 9 10 #include <linux/clk.h> 11 #include <linux/dma-mapping.h> 12 #include <linux/err.h> 13 #include <linux/io.h> 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/platform_device.h> 17 #include <linux/usb/usb_phy_generic.h> 18 #include "musb_core.h" 19 #include "musb_dma.h" 20 21 #define MPFS_MUSB_MAX_EP_NUM 8 22 #define MPFS_MUSB_RAM_BITS 12 23 24 struct mpfs_glue { 25 struct device *dev; 26 struct platform_device *musb; 27 struct platform_device *phy; 28 struct clk *clk; 29 }; 30 31 static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = { 32 { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, 33 { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, 34 { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, 35 { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, 36 { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, 37 { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, 38 { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, }, 39 { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, }, 40 }; 41 42 static const struct musb_hdrc_config mpfs_musb_hdrc_config = { 43 .fifo_cfg = mpfs_musb_mode_cfg, 44 .fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg), 45 .multipoint = true, 46 .dyn_fifo = true, 47 .num_eps = MPFS_MUSB_MAX_EP_NUM, 48 .ram_bits = MPFS_MUSB_RAM_BITS, 49 }; 50 51 static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci) 52 { 53 unsigned long flags; 54 irqreturn_t ret = IRQ_NONE; 55 struct musb *musb = __hci; 56 57 spin_lock_irqsave(&musb->lock, flags); 58 59 musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); 60 musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); 61 musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); 62 63 if (musb->int_usb || musb->int_tx || musb->int_rx) { 64 musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); 65 musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); 66 musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); 67 ret = musb_interrupt(musb); 68 } 69 70 spin_unlock_irqrestore(&musb->lock, flags); 71 72 return ret; 73 } 74 75 static void mpfs_musb_set_vbus(struct musb *musb, int is_on) 76 { 77 u8 devctl; 78 79 /* 80 * HDRC controls CPEN, but beware current surges during device 81 * connect. They can trigger transient overcurrent conditions 82 * that must be ignored. 83 */ 84 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); 85 86 if (is_on) { 87 musb->is_active = 1; 88 musb->xceiv->otg->default_a = 1; 89 musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; 90 devctl |= MUSB_DEVCTL_SESSION; 91 MUSB_HST_MODE(musb); 92 } else { 93 musb->is_active = 0; 94 95 /* 96 * NOTE: skipping A_WAIT_VFALL -> A_IDLE and 97 * jumping right to B_IDLE... 98 */ 99 musb->xceiv->otg->default_a = 0; 100 musb->xceiv->otg->state = OTG_STATE_B_IDLE; 101 devctl &= ~MUSB_DEVCTL_SESSION; 102 103 MUSB_DEV_MODE(musb); 104 } 105 106 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); 107 108 dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", 109 usb_otg_state_string(musb->xceiv->otg->state), 110 musb_readb(musb->mregs, MUSB_DEVCTL)); 111 } 112 113 static int mpfs_musb_init(struct musb *musb) 114 { 115 struct device *dev = musb->controller; 116 117 musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); 118 if (IS_ERR(musb->xceiv)) { 119 dev_err(dev, "HS UDC: no transceiver configured\n"); 120 return PTR_ERR(musb->xceiv); 121 } 122 123 musb->dyn_fifo = true; 124 musb->isr = mpfs_musb_interrupt; 125 126 musb_platform_set_vbus(musb, 1); 127 128 return 0; 129 } 130 131 static const struct musb_platform_ops mpfs_ops = { 132 .quirks = MUSB_DMA_INVENTRA, 133 .init = mpfs_musb_init, 134 .fifo_mode = 2, 135 #ifdef CONFIG_USB_INVENTRA_DMA 136 .dma_init = musbhs_dma_controller_create, 137 .dma_exit = musbhs_dma_controller_destroy, 138 #endif 139 .set_vbus = mpfs_musb_set_vbus 140 }; 141 142 static int mpfs_probe(struct platform_device *pdev) 143 { 144 struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); 145 struct mpfs_glue *glue; 146 struct platform_device *musb_pdev; 147 struct device *dev = &pdev->dev; 148 struct clk *clk; 149 int ret; 150 151 glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); 152 if (!glue) 153 return -ENOMEM; 154 155 musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); 156 if (!musb_pdev) { 157 dev_err(dev, "failed to allocate musb device\n"); 158 return -ENOMEM; 159 } 160 161 clk = devm_clk_get(&pdev->dev, NULL); 162 if (IS_ERR(clk)) { 163 dev_err(&pdev->dev, "failed to get clock\n"); 164 ret = PTR_ERR(clk); 165 goto err_phy_release; 166 } 167 168 ret = clk_prepare_enable(clk); 169 if (ret) { 170 dev_err(&pdev->dev, "failed to enable clock\n"); 171 goto err_phy_release; 172 } 173 174 musb_pdev->dev.parent = dev; 175 musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39); 176 musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask; 177 device_set_of_node_from_dev(&musb_pdev->dev, dev); 178 179 glue->dev = dev; 180 glue->musb = musb_pdev; 181 glue->clk = clk; 182 183 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 184 if (!pdata) { 185 ret = -ENOMEM; 186 goto err_clk_disable; 187 } 188 189 pdata->config = &mpfs_musb_hdrc_config; 190 pdata->platform_ops = &mpfs_ops; 191 192 pdata->mode = usb_get_dr_mode(dev); 193 if (pdata->mode == USB_DR_MODE_UNKNOWN) { 194 dev_info(dev, "No dr_mode property found, defaulting to otg\n"); 195 pdata->mode = USB_DR_MODE_OTG; 196 } 197 198 glue->phy = usb_phy_generic_register(); 199 if (IS_ERR(glue->phy)) { 200 dev_err(dev, "failed to register usb-phy %ld\n", 201 PTR_ERR(glue->phy)); 202 ret = PTR_ERR(glue->phy); 203 goto err_clk_disable; 204 } 205 206 platform_set_drvdata(pdev, glue); 207 208 ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources); 209 if (ret) { 210 dev_err(dev, "failed to add resources\n"); 211 goto err_clk_disable; 212 } 213 214 ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata)); 215 if (ret) { 216 dev_err(dev, "failed to add platform_data\n"); 217 goto err_clk_disable; 218 } 219 220 ret = platform_device_add(musb_pdev); 221 if (ret) { 222 dev_err(dev, "failed to register musb device\n"); 223 goto err_clk_disable; 224 } 225 226 dev_info(&pdev->dev, "Registered MPFS MUSB driver\n"); 227 return 0; 228 229 err_clk_disable: 230 clk_disable_unprepare(clk); 231 232 err_phy_release: 233 usb_phy_generic_unregister(glue->phy); 234 platform_device_put(musb_pdev); 235 return ret; 236 } 237 238 static void mpfs_remove(struct platform_device *pdev) 239 { 240 struct mpfs_glue *glue = platform_get_drvdata(pdev); 241 242 clk_disable_unprepare(glue->clk); 243 platform_device_unregister(glue->musb); 244 usb_phy_generic_unregister(pdev); 245 } 246 247 #ifdef CONFIG_OF 248 static const struct of_device_id mpfs_id_table[] = { 249 { .compatible = "microchip,mpfs-musb" }, 250 { } 251 }; 252 MODULE_DEVICE_TABLE(of, mpfs_id_table); 253 #endif 254 255 static struct platform_driver mpfs_musb_driver = { 256 .probe = mpfs_probe, 257 .remove_new = mpfs_remove, 258 .driver = { 259 .name = "mpfs-musb", 260 .of_match_table = of_match_ptr(mpfs_id_table) 261 }, 262 }; 263 264 module_platform_driver(mpfs_musb_driver); 265 266 MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer"); 267 MODULE_LICENSE("GPL"); 268