1# 2# USB Dual Role (OTG-ready) Controller Drivers 3# for silicon based on Mentor Graphics INVENTRA designs 4# 5 6# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller 7config USB_MUSB_HDRC 8 tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' 9 depends on (USB || USB_GADGET) 10 help 11 Say Y here if your system has a dual role high speed USB 12 controller based on the Mentor Graphics silicon IP. Then 13 configure options to match your silicon and the board 14 it's being used with, including the USB peripheral role, 15 or the USB host role, or both. 16 17 Texas Instruments families using this IP include DaVinci 18 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. 19 20 Analog Devices parts using this IP include Blackfin BF54x, 21 BF525 and BF527. 22 23 If you do not know what this is, please say N. 24 25 To compile this driver as a module, choose M here; the 26 module will be called "musb-hdrc". 27 28if USB_MUSB_HDRC 29 30choice 31 bool "MUSB Mode Selection" 32 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET) 33 default USB_MUSB_HOST if (USB && !USB_GADGET) 34 default USB_MUSB_GADGET if (!USB && USB_GADGET) 35 36config USB_MUSB_HOST 37 bool "Host only mode" 38 depends on USB=y || USB=USB_MUSB_HDRC 39 help 40 Select this when you want to use MUSB in host mode only, 41 thereby the gadget feature will be regressed. 42 43config USB_MUSB_GADGET 44 bool "Gadget only mode" 45 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC 46 depends on HAS_DMA 47 help 48 Select this when you want to use MUSB in gadget mode only, 49 thereby the host feature will be regressed. 50 51config USB_MUSB_DUAL_ROLE 52 bool "Dual Role mode" 53 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) 54 depends on HAS_DMA 55 help 56 This is the default mode of working of MUSB controller where 57 both host and gadget features are enabled. 58 59endchoice 60 61comment "Platform Glue Layer" 62 63config USB_MUSB_DAVINCI 64 tristate "DaVinci" 65 depends on ARCH_DAVINCI_DMx 66 depends on BROKEN 67 68config USB_MUSB_DA8XX 69 tristate "DA8xx/OMAP-L1x" 70 depends on ARCH_DAVINCI_DA8XX 71 depends on BROKEN 72 73config USB_MUSB_TUSB6010 74 tristate "TUSB6010" 75 76config USB_MUSB_OMAP2PLUS 77 tristate "OMAP2430 and onwards" 78 depends on ARCH_OMAP2PLUS && USB 79 select GENERIC_PHY 80 81config USB_MUSB_AM35X 82 tristate "AM35x" 83 depends on ARCH_OMAP 84 85config USB_MUSB_DSPS 86 tristate "TI DSPS platforms" 87 select USB_MUSB_AM335X_CHILD 88 depends on OF_IRQ 89 90config USB_MUSB_BLACKFIN 91 tristate "Blackfin" 92 depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523) 93 94config USB_MUSB_UX500 95 tristate "Ux500 platforms" 96 97config USB_MUSB_JZ4740 98 tristate "JZ4740" 99 depends on MACH_JZ4740 || COMPILE_TEST 100 depends on USB_MUSB_GADGET 101 depends on USB_OTG_BLACKLIST_HUB 102 103config USB_MUSB_AM335X_CHILD 104 tristate 105 106choice 107 prompt 'MUSB DMA mode' 108 default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740 109 default USB_UX500_DMA if USB_MUSB_UX500 110 default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN 111 default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI 112 default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010 113 default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \ 114 || USB_MUSB_DSPS 115 help 116 Unfortunately, only one option can be enabled here. Ideally one 117 should be able to build all these drivers into one kernel to 118 allow using DMA on multiplatform kernels. 119 120config USB_UX500_DMA 121 bool 'ST Ericsson Ux500' 122 depends on USB_MUSB_UX500 123 help 124 Enable DMA transfers on UX500 platforms. 125 126config USB_INVENTRA_DMA 127 bool 'Inventra' 128 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN 129 help 130 Enable DMA transfers using Mentor's engine. 131 132config USB_TI_CPPI_DMA 133 bool 'TI CPPI (Davinci)' 134 depends on USB_MUSB_DAVINCI 135 help 136 Enable DMA transfers when TI CPPI DMA is available. 137 138config USB_TI_CPPI41_DMA 139 bool 'TI CPPI 4.1 (AM335x)' 140 depends on ARCH_OMAP 141 select TI_CPPI41 142 143config USB_TUSB_OMAP_DMA 144 bool 'TUSB 6010' 145 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules 146 depends on ARCH_OMAP 147 help 148 Enable DMA transfers on TUSB 6010 when OMAP DMA is available. 149 150config MUSB_PIO_ONLY 151 bool 'Disable DMA (always use PIO)' 152 help 153 All data is copied between memory and FIFO by the CPU. 154 DMA controllers are ignored. 155 156 Do not choose this unless DMA support for your SOC or board 157 is unavailable (or unstable). When DMA is enabled at compile time, 158 you can still disable it at run time using the "use_dma=n" module 159 parameter. 160 161endchoice 162 163endif # USB_MUSB_HDRC 164