1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * mtu3_core.c - hardware access layer and gadget init/exit of 4 * MediaTek usb3 Dual-Role Controller Driver 5 * 6 * Copyright (C) 2016 MediaTek Inc. 7 * 8 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> 9 */ 10 11 #include <linux/dma-mapping.h> 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/of_address.h> 15 #include <linux/of_irq.h> 16 #include <linux/platform_device.h> 17 18 #include "mtu3.h" 19 #include "mtu3_dr.h" 20 #include "mtu3_debug.h" 21 #include "mtu3_trace.h" 22 23 static int ep_fifo_alloc(struct mtu3_ep *mep, u32 seg_size) 24 { 25 struct mtu3_fifo_info *fifo = mep->fifo; 26 u32 num_bits = DIV_ROUND_UP(seg_size, MTU3_EP_FIFO_UNIT); 27 u32 start_bit; 28 29 /* ensure that @mep->fifo_seg_size is power of two */ 30 num_bits = roundup_pow_of_two(num_bits); 31 if (num_bits > fifo->limit) 32 return -EINVAL; 33 34 mep->fifo_seg_size = num_bits * MTU3_EP_FIFO_UNIT; 35 num_bits = num_bits * (mep->slot + 1); 36 start_bit = bitmap_find_next_zero_area(fifo->bitmap, 37 fifo->limit, 0, num_bits, 0); 38 if (start_bit >= fifo->limit) 39 return -EOVERFLOW; 40 41 bitmap_set(fifo->bitmap, start_bit, num_bits); 42 mep->fifo_size = num_bits * MTU3_EP_FIFO_UNIT; 43 mep->fifo_addr = fifo->base + MTU3_EP_FIFO_UNIT * start_bit; 44 45 dev_dbg(mep->mtu->dev, "%s fifo:%#x/%#x, start_bit: %d\n", 46 __func__, mep->fifo_seg_size, mep->fifo_size, start_bit); 47 48 return mep->fifo_addr; 49 } 50 51 static void ep_fifo_free(struct mtu3_ep *mep) 52 { 53 struct mtu3_fifo_info *fifo = mep->fifo; 54 u32 addr = mep->fifo_addr; 55 u32 bits = mep->fifo_size / MTU3_EP_FIFO_UNIT; 56 u32 start_bit; 57 58 if (unlikely(addr < fifo->base || bits > fifo->limit)) 59 return; 60 61 start_bit = (addr - fifo->base) / MTU3_EP_FIFO_UNIT; 62 bitmap_clear(fifo->bitmap, start_bit, bits); 63 mep->fifo_size = 0; 64 mep->fifo_seg_size = 0; 65 66 dev_dbg(mep->mtu->dev, "%s size:%#x/%#x, start_bit: %d\n", 67 __func__, mep->fifo_seg_size, mep->fifo_size, start_bit); 68 } 69 70 /* enable/disable U3D SS function */ 71 static inline void mtu3_ss_func_set(struct mtu3 *mtu, bool enable) 72 { 73 /* If usb3_en==0, LTSSM will go to SS.Disable state */ 74 if (enable) 75 mtu3_setbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN); 76 else 77 mtu3_clrbits(mtu->mac_base, U3D_USB3_CONFIG, USB3_EN); 78 79 dev_dbg(mtu->dev, "USB3_EN = %d\n", !!enable); 80 } 81 82 /* set/clear U3D HS device soft connect */ 83 static inline void mtu3_hs_softconn_set(struct mtu3 *mtu, bool enable) 84 { 85 if (enable) { 86 mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, 87 SOFT_CONN | SUSPENDM_ENABLE); 88 } else { 89 mtu3_clrbits(mtu->mac_base, U3D_POWER_MANAGEMENT, 90 SOFT_CONN | SUSPENDM_ENABLE); 91 } 92 dev_dbg(mtu->dev, "SOFTCONN = %d\n", !!enable); 93 } 94 95 /* only port0 of U2/U3 supports device mode */ 96 static int mtu3_device_enable(struct mtu3 *mtu) 97 { 98 void __iomem *ibase = mtu->ippc_base; 99 u32 check_clk = 0; 100 101 mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); 102 103 if (mtu->is_u3_ip) { 104 check_clk = SSUSB_U3_MAC_RST_B_STS; 105 mtu3_clrbits(ibase, SSUSB_U3_CTRL(0), 106 (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN | 107 SSUSB_U3_PORT_HOST_SEL)); 108 } 109 mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), 110 (SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN | 111 SSUSB_U2_PORT_HOST_SEL)); 112 113 if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) { 114 mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL); 115 if (mtu->is_u3_ip) 116 mtu3_setbits(ibase, SSUSB_U3_CTRL(0), 117 SSUSB_U3_PORT_DUAL_MODE); 118 } 119 120 return ssusb_check_clocks(mtu->ssusb, check_clk); 121 } 122 123 static void mtu3_device_disable(struct mtu3 *mtu) 124 { 125 void __iomem *ibase = mtu->ippc_base; 126 127 if (mtu->is_u3_ip) 128 mtu3_setbits(ibase, SSUSB_U3_CTRL(0), 129 (SSUSB_U3_PORT_DIS | SSUSB_U3_PORT_PDN)); 130 131 mtu3_setbits(ibase, SSUSB_U2_CTRL(0), 132 SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN); 133 134 if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) { 135 mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL); 136 if (mtu->is_u3_ip) 137 mtu3_clrbits(ibase, SSUSB_U3_CTRL(0), 138 SSUSB_U3_PORT_DUAL_MODE); 139 } 140 141 mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); 142 } 143 144 static void mtu3_dev_power_on(struct mtu3 *mtu) 145 { 146 void __iomem *ibase = mtu->ippc_base; 147 148 mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); 149 if (mtu->is_u3_ip) 150 mtu3_clrbits(ibase, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN); 151 152 mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN); 153 } 154 155 static void mtu3_dev_power_down(struct mtu3 *mtu) 156 { 157 void __iomem *ibase = mtu->ippc_base; 158 159 if (mtu->is_u3_ip) 160 mtu3_setbits(ibase, SSUSB_U3_CTRL(0), SSUSB_U3_PORT_PDN); 161 162 mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_PDN); 163 mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); 164 } 165 166 /* reset U3D's device module. */ 167 static void mtu3_device_reset(struct mtu3 *mtu) 168 { 169 void __iomem *ibase = mtu->ippc_base; 170 171 mtu3_setbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST); 172 udelay(1); 173 mtu3_clrbits(ibase, U3D_SSUSB_DEV_RST_CTRL, SSUSB_DEV_SW_RST); 174 } 175 176 static void mtu3_intr_status_clear(struct mtu3 *mtu) 177 { 178 void __iomem *mbase = mtu->mac_base; 179 180 /* Clear EP0 and Tx/Rx EPn interrupts status */ 181 mtu3_writel(mbase, U3D_EPISR, ~0x0); 182 /* Clear U2 USB common interrupts status */ 183 mtu3_writel(mbase, U3D_COMMON_USB_INTR, ~0x0); 184 /* Clear U3 LTSSM interrupts status */ 185 mtu3_writel(mbase, U3D_LTSSM_INTR, ~0x0); 186 /* Clear speed change interrupt status */ 187 mtu3_writel(mbase, U3D_DEV_LINK_INTR, ~0x0); 188 /* Clear QMU interrupt status */ 189 mtu3_writel(mbase, U3D_QISAR0, ~0x0); 190 } 191 192 /* disable all interrupts */ 193 static void mtu3_intr_disable(struct mtu3 *mtu) 194 { 195 /* Disable level 1 interrupts */ 196 mtu3_writel(mtu->mac_base, U3D_LV1IECR, ~0x0); 197 /* Disable endpoint interrupts */ 198 mtu3_writel(mtu->mac_base, U3D_EPIECR, ~0x0); 199 mtu3_intr_status_clear(mtu); 200 } 201 202 /* enable system global interrupt */ 203 static void mtu3_intr_enable(struct mtu3 *mtu) 204 { 205 void __iomem *mbase = mtu->mac_base; 206 u32 value; 207 208 /*Enable level 1 interrupts (BMU, QMU, MAC3, DMA, MAC2, EPCTL) */ 209 value = BMU_INTR | QMU_INTR | MAC3_INTR | MAC2_INTR | EP_CTRL_INTR; 210 mtu3_writel(mbase, U3D_LV1IESR, value); 211 212 /* Enable U2 common USB interrupts */ 213 value = SUSPEND_INTR | RESUME_INTR | RESET_INTR; 214 mtu3_writel(mbase, U3D_COMMON_USB_INTR_ENABLE, value); 215 216 if (mtu->is_u3_ip) { 217 /* Enable U3 LTSSM interrupts */ 218 value = HOT_RST_INTR | WARM_RST_INTR | 219 ENTER_U3_INTR | EXIT_U3_INTR; 220 mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value); 221 } 222 223 /* Enable QMU interrupts. */ 224 value = TXQ_CSERR_INT | TXQ_LENERR_INT | RXQ_CSERR_INT | 225 RXQ_LENERR_INT | RXQ_ZLPERR_INT; 226 mtu3_writel(mbase, U3D_QIESR1, value); 227 228 /* Enable speed change interrupt */ 229 mtu3_writel(mbase, U3D_DEV_LINK_INTR_ENABLE, SSUSB_DEV_SPEED_CHG_INTR); 230 } 231 232 static void mtu3_set_speed(struct mtu3 *mtu, enum usb_device_speed speed) 233 { 234 void __iomem *mbase = mtu->mac_base; 235 236 if (speed > mtu->max_speed) 237 speed = mtu->max_speed; 238 239 switch (speed) { 240 case USB_SPEED_FULL: 241 /* disable U3 SS function */ 242 mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); 243 /* disable HS function */ 244 mtu3_clrbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); 245 break; 246 case USB_SPEED_HIGH: 247 mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN); 248 /* HS/FS detected by HW */ 249 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); 250 break; 251 case USB_SPEED_SUPER: 252 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); 253 mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0), 254 SSUSB_U3_PORT_SSP_SPEED); 255 break; 256 case USB_SPEED_SUPER_PLUS: 257 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE); 258 mtu3_setbits(mtu->ippc_base, SSUSB_U3_CTRL(0), 259 SSUSB_U3_PORT_SSP_SPEED); 260 break; 261 default: 262 dev_err(mtu->dev, "invalid speed: %s\n", 263 usb_speed_string(speed)); 264 return; 265 } 266 267 mtu->speed = speed; 268 dev_dbg(mtu->dev, "set speed: %s\n", usb_speed_string(speed)); 269 } 270 271 /* CSR registers will be reset to default value if port is disabled */ 272 static void mtu3_csr_init(struct mtu3 *mtu) 273 { 274 void __iomem *mbase = mtu->mac_base; 275 276 if (mtu->is_u3_ip) { 277 /* disable LGO_U1/U2 by default */ 278 mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL, 279 SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE); 280 /* enable accept LGO_U1/U2 link command from host */ 281 mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL, 282 SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE); 283 /* device responses to u3_exit from host automatically */ 284 mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); 285 /* automatically build U2 link when U3 detect fail */ 286 mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); 287 /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ 288 mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); 289 } 290 291 /* delay about 0.1us from detecting reset to send chirp-K */ 292 mtu3_clrbits(mbase, U3D_LINK_RESET_INFO, WTCHRP_MSK); 293 /* enable automatical HWRW from L1 */ 294 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, LPM_HRWE); 295 } 296 297 /* reset: u2 - data toggle, u3 - SeqN, flow control status etc */ 298 static void mtu3_ep_reset(struct mtu3_ep *mep) 299 { 300 struct mtu3 *mtu = mep->mtu; 301 u32 rst_bit = EP_RST(mep->is_in, mep->epnum); 302 303 mtu3_setbits(mtu->mac_base, U3D_EP_RST, rst_bit); 304 mtu3_clrbits(mtu->mac_base, U3D_EP_RST, rst_bit); 305 } 306 307 /* set/clear the stall and toggle bits for non-ep0 */ 308 void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set) 309 { 310 struct mtu3 *mtu = mep->mtu; 311 void __iomem *mbase = mtu->mac_base; 312 u8 epnum = mep->epnum; 313 u32 csr; 314 315 if (mep->is_in) { /* TX */ 316 csr = mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)) & TX_W1C_BITS; 317 if (set) 318 csr |= TX_SENDSTALL; 319 else 320 csr = (csr & (~TX_SENDSTALL)) | TX_SENTSTALL; 321 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr); 322 } else { /* RX */ 323 csr = mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)) & RX_W1C_BITS; 324 if (set) 325 csr |= RX_SENDSTALL; 326 else 327 csr = (csr & (~RX_SENDSTALL)) | RX_SENTSTALL; 328 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr); 329 } 330 331 if (!set) { 332 mtu3_ep_reset(mep); 333 mep->flags &= ~MTU3_EP_STALL; 334 } else { 335 mep->flags |= MTU3_EP_STALL; 336 } 337 338 dev_dbg(mtu->dev, "%s: %s\n", mep->name, 339 set ? "SEND STALL" : "CLEAR STALL, with EP RESET"); 340 } 341 342 void mtu3_dev_on_off(struct mtu3 *mtu, int is_on) 343 { 344 if (mtu->is_u3_ip && mtu->speed >= USB_SPEED_SUPER) 345 mtu3_ss_func_set(mtu, is_on); 346 else 347 mtu3_hs_softconn_set(mtu, is_on); 348 349 dev_info(mtu->dev, "gadget (%s) pullup D%s\n", 350 usb_speed_string(mtu->speed), is_on ? "+" : "-"); 351 } 352 353 void mtu3_start(struct mtu3 *mtu) 354 { 355 void __iomem *mbase = mtu->mac_base; 356 357 dev_dbg(mtu->dev, "%s devctl 0x%x\n", __func__, 358 mtu3_readl(mbase, U3D_DEVICE_CONTROL)); 359 360 mtu3_dev_power_on(mtu); 361 mtu3_csr_init(mtu); 362 mtu3_set_speed(mtu, mtu->speed); 363 364 /* Initialize the default interrupts */ 365 mtu3_intr_enable(mtu); 366 mtu->is_active = 1; 367 368 if (mtu->softconnect) 369 mtu3_dev_on_off(mtu, 1); 370 } 371 372 void mtu3_stop(struct mtu3 *mtu) 373 { 374 dev_dbg(mtu->dev, "%s\n", __func__); 375 376 mtu3_intr_disable(mtu); 377 378 if (mtu->softconnect) 379 mtu3_dev_on_off(mtu, 0); 380 381 mtu->is_active = 0; 382 mtu3_dev_power_down(mtu); 383 } 384 385 static void mtu3_dev_suspend(struct mtu3 *mtu) 386 { 387 if (!mtu->is_active) 388 return; 389 390 mtu3_intr_disable(mtu); 391 mtu3_dev_power_down(mtu); 392 } 393 394 static void mtu3_dev_resume(struct mtu3 *mtu) 395 { 396 if (!mtu->is_active) 397 return; 398 399 mtu3_dev_power_on(mtu); 400 mtu3_intr_enable(mtu); 401 } 402 403 /* for non-ep0 */ 404 int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep, 405 int interval, int burst, int mult) 406 { 407 void __iomem *mbase = mtu->mac_base; 408 bool gen2cp = mtu->gen2cp; 409 int epnum = mep->epnum; 410 u32 csr0, csr1, csr2; 411 int fifo_sgsz, fifo_addr; 412 int num_pkts; 413 414 fifo_addr = ep_fifo_alloc(mep, mep->maxp); 415 if (fifo_addr < 0) { 416 dev_err(mtu->dev, "alloc ep fifo failed(%d)\n", mep->maxp); 417 return -ENOMEM; 418 } 419 fifo_sgsz = ilog2(mep->fifo_seg_size); 420 dev_dbg(mtu->dev, "%s fifosz: %x(%x/%x)\n", __func__, fifo_sgsz, 421 mep->fifo_seg_size, mep->fifo_size); 422 423 if (mep->is_in) { 424 csr0 = TX_TXMAXPKTSZ(mep->maxp); 425 csr0 |= TX_DMAREQEN; 426 427 num_pkts = (burst + 1) * (mult + 1) - 1; 428 csr1 = TX_SS_BURST(burst) | TX_SLOT(mep->slot); 429 csr1 |= TX_MAX_PKT(gen2cp, num_pkts) | TX_MULT(gen2cp, mult); 430 431 csr2 = TX_FIFOADDR(fifo_addr >> 4); 432 csr2 |= TX_FIFOSEGSIZE(fifo_sgsz); 433 434 switch (mep->type) { 435 case USB_ENDPOINT_XFER_BULK: 436 csr1 |= TX_TYPE(TYPE_BULK); 437 break; 438 case USB_ENDPOINT_XFER_ISOC: 439 csr1 |= TX_TYPE(TYPE_ISO); 440 csr2 |= TX_BINTERVAL(interval); 441 break; 442 case USB_ENDPOINT_XFER_INT: 443 csr1 |= TX_TYPE(TYPE_INT); 444 csr2 |= TX_BINTERVAL(interval); 445 break; 446 } 447 448 /* Enable QMU Done interrupt */ 449 mtu3_setbits(mbase, U3D_QIESR0, QMU_TX_DONE_INT(epnum)); 450 451 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), csr0); 452 mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), csr1); 453 mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), csr2); 454 455 dev_dbg(mtu->dev, "U3D_TX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n", 456 epnum, mtu3_readl(mbase, MU3D_EP_TXCR0(epnum)), 457 mtu3_readl(mbase, MU3D_EP_TXCR1(epnum)), 458 mtu3_readl(mbase, MU3D_EP_TXCR2(epnum))); 459 } else { 460 csr0 = RX_RXMAXPKTSZ(mep->maxp); 461 csr0 |= RX_DMAREQEN; 462 463 num_pkts = (burst + 1) * (mult + 1) - 1; 464 csr1 = RX_SS_BURST(burst) | RX_SLOT(mep->slot); 465 csr1 |= RX_MAX_PKT(gen2cp, num_pkts) | RX_MULT(gen2cp, mult); 466 467 csr2 = RX_FIFOADDR(fifo_addr >> 4); 468 csr2 |= RX_FIFOSEGSIZE(fifo_sgsz); 469 470 switch (mep->type) { 471 case USB_ENDPOINT_XFER_BULK: 472 csr1 |= RX_TYPE(TYPE_BULK); 473 break; 474 case USB_ENDPOINT_XFER_ISOC: 475 csr1 |= RX_TYPE(TYPE_ISO); 476 csr2 |= RX_BINTERVAL(interval); 477 break; 478 case USB_ENDPOINT_XFER_INT: 479 csr1 |= RX_TYPE(TYPE_INT); 480 csr2 |= RX_BINTERVAL(interval); 481 break; 482 } 483 484 /*Enable QMU Done interrupt */ 485 mtu3_setbits(mbase, U3D_QIESR0, QMU_RX_DONE_INT(epnum)); 486 487 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), csr0); 488 mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), csr1); 489 mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), csr2); 490 491 dev_dbg(mtu->dev, "U3D_RX%d CSR0:%#x, CSR1:%#x, CSR2:%#x\n", 492 epnum, mtu3_readl(mbase, MU3D_EP_RXCR0(epnum)), 493 mtu3_readl(mbase, MU3D_EP_RXCR1(epnum)), 494 mtu3_readl(mbase, MU3D_EP_RXCR2(epnum))); 495 } 496 497 dev_dbg(mtu->dev, "csr0:%#x, csr1:%#x, csr2:%#x\n", csr0, csr1, csr2); 498 dev_dbg(mtu->dev, "%s: %s, fifo-addr:%#x, fifo-size:%#x(%#x/%#x)\n", 499 __func__, mep->name, mep->fifo_addr, mep->fifo_size, 500 fifo_sgsz, mep->fifo_seg_size); 501 502 return 0; 503 } 504 505 /* for non-ep0 */ 506 void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep) 507 { 508 void __iomem *mbase = mtu->mac_base; 509 int epnum = mep->epnum; 510 511 if (mep->is_in) { 512 mtu3_writel(mbase, MU3D_EP_TXCR0(epnum), 0); 513 mtu3_writel(mbase, MU3D_EP_TXCR1(epnum), 0); 514 mtu3_writel(mbase, MU3D_EP_TXCR2(epnum), 0); 515 mtu3_setbits(mbase, U3D_QIECR0, QMU_TX_DONE_INT(epnum)); 516 } else { 517 mtu3_writel(mbase, MU3D_EP_RXCR0(epnum), 0); 518 mtu3_writel(mbase, MU3D_EP_RXCR1(epnum), 0); 519 mtu3_writel(mbase, MU3D_EP_RXCR2(epnum), 0); 520 mtu3_setbits(mbase, U3D_QIECR0, QMU_RX_DONE_INT(epnum)); 521 } 522 523 mtu3_ep_reset(mep); 524 ep_fifo_free(mep); 525 526 dev_dbg(mtu->dev, "%s: %s\n", __func__, mep->name); 527 } 528 529 /* 530 * Two scenarios: 531 * 1. when device IP supports SS, the fifo of EP0, TX EPs, RX EPs 532 * are separated; 533 * 2. when supports only HS, the fifo is shared for all EPs, and 534 * the capability registers of @EPNTXFFSZ or @EPNRXFFSZ indicate 535 * the total fifo size of non-ep0, and ep0's is fixed to 64B, 536 * so the total fifo size is 64B + @EPNTXFFSZ; 537 * Due to the first 64B should be reserved for EP0, non-ep0's fifo 538 * starts from offset 64 and are divided into two equal parts for 539 * TX or RX EPs for simplification. 540 */ 541 static void get_ep_fifo_config(struct mtu3 *mtu) 542 { 543 struct mtu3_fifo_info *tx_fifo; 544 struct mtu3_fifo_info *rx_fifo; 545 u32 fifosize; 546 547 if (mtu->is_u3_ip) { 548 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); 549 tx_fifo = &mtu->tx_fifo; 550 tx_fifo->base = 0; 551 tx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT; 552 bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); 553 554 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNRXFFSZ); 555 rx_fifo = &mtu->rx_fifo; 556 rx_fifo->base = 0; 557 rx_fifo->limit = fifosize / MTU3_EP_FIFO_UNIT; 558 bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); 559 mtu->slot = MTU3_U3_IP_SLOT_DEFAULT; 560 } else { 561 fifosize = mtu3_readl(mtu->mac_base, U3D_CAP_EPNTXFFSZ); 562 tx_fifo = &mtu->tx_fifo; 563 tx_fifo->base = MTU3_U2_IP_EP0_FIFO_SIZE; 564 tx_fifo->limit = (fifosize / MTU3_EP_FIFO_UNIT) >> 1; 565 bitmap_zero(tx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); 566 567 rx_fifo = &mtu->rx_fifo; 568 rx_fifo->base = 569 tx_fifo->base + tx_fifo->limit * MTU3_EP_FIFO_UNIT; 570 rx_fifo->limit = tx_fifo->limit; 571 bitmap_zero(rx_fifo->bitmap, MTU3_FIFO_BIT_SIZE); 572 mtu->slot = MTU3_U2_IP_SLOT_DEFAULT; 573 } 574 575 dev_dbg(mtu->dev, "%s, TX: base-%d, limit-%d; RX: base-%d, limit-%d\n", 576 __func__, tx_fifo->base, tx_fifo->limit, 577 rx_fifo->base, rx_fifo->limit); 578 } 579 580 static void mtu3_ep0_setup(struct mtu3 *mtu) 581 { 582 u32 maxpacket = mtu->g.ep0->maxpacket; 583 u32 csr; 584 585 dev_dbg(mtu->dev, "%s maxpacket: %d\n", __func__, maxpacket); 586 587 csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR); 588 csr &= ~EP0_MAXPKTSZ_MSK; 589 csr |= EP0_MAXPKTSZ(maxpacket); 590 csr &= EP0_W1C_BITS; 591 mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); 592 593 /* Enable EP0 interrupt */ 594 mtu3_writel(mtu->mac_base, U3D_EPIESR, EP0ISR | SETUPENDISR); 595 } 596 597 static int mtu3_mem_alloc(struct mtu3 *mtu) 598 { 599 void __iomem *mbase = mtu->mac_base; 600 struct mtu3_ep *ep_array; 601 int in_ep_num, out_ep_num; 602 u32 cap_epinfo; 603 int ret; 604 int i; 605 606 cap_epinfo = mtu3_readl(mbase, U3D_CAP_EPINFO); 607 in_ep_num = CAP_TX_EP_NUM(cap_epinfo); 608 out_ep_num = CAP_RX_EP_NUM(cap_epinfo); 609 610 dev_info(mtu->dev, "fifosz/epnum: Tx=%#x/%d, Rx=%#x/%d\n", 611 mtu3_readl(mbase, U3D_CAP_EPNTXFFSZ), in_ep_num, 612 mtu3_readl(mbase, U3D_CAP_EPNRXFFSZ), out_ep_num); 613 614 /* one for ep0, another is reserved */ 615 mtu->num_eps = min(in_ep_num, out_ep_num) + 1; 616 ep_array = kcalloc(mtu->num_eps * 2, sizeof(*ep_array), GFP_KERNEL); 617 if (ep_array == NULL) 618 return -ENOMEM; 619 620 mtu->ep_array = ep_array; 621 mtu->in_eps = ep_array; 622 mtu->out_eps = &ep_array[mtu->num_eps]; 623 /* ep0 uses in_eps[0], out_eps[0] is reserved */ 624 mtu->ep0 = mtu->in_eps; 625 mtu->ep0->mtu = mtu; 626 mtu->ep0->epnum = 0; 627 628 for (i = 1; i < mtu->num_eps; i++) { 629 struct mtu3_ep *mep = mtu->in_eps + i; 630 631 mep->fifo = &mtu->tx_fifo; 632 mep = mtu->out_eps + i; 633 mep->fifo = &mtu->rx_fifo; 634 } 635 636 get_ep_fifo_config(mtu); 637 638 ret = mtu3_qmu_init(mtu); 639 if (ret) 640 kfree(mtu->ep_array); 641 642 return ret; 643 } 644 645 static void mtu3_mem_free(struct mtu3 *mtu) 646 { 647 mtu3_qmu_exit(mtu); 648 kfree(mtu->ep_array); 649 } 650 651 static void mtu3_regs_init(struct mtu3 *mtu) 652 { 653 void __iomem *mbase = mtu->mac_base; 654 655 /* be sure interrupts are disabled before registration of ISR */ 656 mtu3_intr_disable(mtu); 657 658 mtu3_csr_init(mtu); 659 660 /* U2/U3 detected by HW */ 661 mtu3_writel(mbase, U3D_DEVICE_CONF, 0); 662 /* vbus detected by HW */ 663 mtu3_clrbits(mbase, U3D_MISC_CTRL, VBUS_FRC_EN | VBUS_ON); 664 /* use new QMU format when HW version >= 0x1003 */ 665 if (mtu->gen2cp) 666 mtu3_writel(mbase, U3D_QFCR, ~0x0); 667 } 668 669 static irqreturn_t mtu3_link_isr(struct mtu3 *mtu) 670 { 671 void __iomem *mbase = mtu->mac_base; 672 enum usb_device_speed udev_speed; 673 u32 maxpkt = 64; 674 u32 link; 675 u32 speed; 676 677 link = mtu3_readl(mbase, U3D_DEV_LINK_INTR); 678 link &= mtu3_readl(mbase, U3D_DEV_LINK_INTR_ENABLE); 679 mtu3_writel(mbase, U3D_DEV_LINK_INTR, link); /* W1C */ 680 dev_dbg(mtu->dev, "=== LINK[%x] ===\n", link); 681 682 if (!(link & SSUSB_DEV_SPEED_CHG_INTR)) 683 return IRQ_NONE; 684 685 speed = SSUSB_DEV_SPEED(mtu3_readl(mbase, U3D_DEVICE_CONF)); 686 687 switch (speed) { 688 case MTU3_SPEED_FULL: 689 udev_speed = USB_SPEED_FULL; 690 /*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */ 691 mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf) 692 | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa)); 693 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, 694 LPM_BESL_STALL | LPM_BESLD_STALL); 695 break; 696 case MTU3_SPEED_HIGH: 697 udev_speed = USB_SPEED_HIGH; 698 /*BESLCK = 4 < BESLCK_U3 = 10 < BESLDCK = 15 */ 699 mtu3_writel(mbase, U3D_USB20_LPM_PARAMETER, LPM_BESLDCK(0xf) 700 | LPM_BESLCK(4) | LPM_BESLCK_U3(0xa)); 701 mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, 702 LPM_BESL_STALL | LPM_BESLD_STALL); 703 break; 704 case MTU3_SPEED_SUPER: 705 udev_speed = USB_SPEED_SUPER; 706 maxpkt = 512; 707 break; 708 case MTU3_SPEED_SUPER_PLUS: 709 udev_speed = USB_SPEED_SUPER_PLUS; 710 maxpkt = 512; 711 break; 712 default: 713 udev_speed = USB_SPEED_UNKNOWN; 714 break; 715 } 716 dev_dbg(mtu->dev, "%s: %s\n", __func__, usb_speed_string(udev_speed)); 717 mtu3_dbg_trace(mtu->dev, "link speed %s", 718 usb_speed_string(udev_speed)); 719 720 mtu->g.speed = udev_speed; 721 mtu->g.ep0->maxpacket = maxpkt; 722 mtu->ep0_state = MU3D_EP0_STATE_SETUP; 723 mtu->connected = !!(udev_speed != USB_SPEED_UNKNOWN); 724 725 if (udev_speed == USB_SPEED_UNKNOWN) { 726 mtu3_gadget_disconnect(mtu); 727 pm_runtime_put(mtu->dev); 728 } else { 729 pm_runtime_get(mtu->dev); 730 mtu3_ep0_setup(mtu); 731 } 732 733 return IRQ_HANDLED; 734 } 735 736 static irqreturn_t mtu3_u3_ltssm_isr(struct mtu3 *mtu) 737 { 738 void __iomem *mbase = mtu->mac_base; 739 u32 ltssm; 740 741 ltssm = mtu3_readl(mbase, U3D_LTSSM_INTR); 742 ltssm &= mtu3_readl(mbase, U3D_LTSSM_INTR_ENABLE); 743 mtu3_writel(mbase, U3D_LTSSM_INTR, ltssm); /* W1C */ 744 dev_dbg(mtu->dev, "=== LTSSM[%x] ===\n", ltssm); 745 trace_mtu3_u3_ltssm_isr(ltssm); 746 747 if (ltssm & (HOT_RST_INTR | WARM_RST_INTR)) 748 mtu3_gadget_reset(mtu); 749 750 if (ltssm & VBUS_FALL_INTR) { 751 mtu3_ss_func_set(mtu, false); 752 mtu3_gadget_reset(mtu); 753 } 754 755 if (ltssm & VBUS_RISE_INTR) 756 mtu3_ss_func_set(mtu, true); 757 758 if (ltssm & EXIT_U3_INTR) 759 mtu3_gadget_resume(mtu); 760 761 if (ltssm & ENTER_U3_INTR) 762 mtu3_gadget_suspend(mtu); 763 764 return IRQ_HANDLED; 765 } 766 767 static irqreturn_t mtu3_u2_common_isr(struct mtu3 *mtu) 768 { 769 void __iomem *mbase = mtu->mac_base; 770 u32 u2comm; 771 772 u2comm = mtu3_readl(mbase, U3D_COMMON_USB_INTR); 773 u2comm &= mtu3_readl(mbase, U3D_COMMON_USB_INTR_ENABLE); 774 mtu3_writel(mbase, U3D_COMMON_USB_INTR, u2comm); /* W1C */ 775 dev_dbg(mtu->dev, "=== U2COMM[%x] ===\n", u2comm); 776 trace_mtu3_u2_common_isr(u2comm); 777 778 if (u2comm & SUSPEND_INTR) 779 mtu3_gadget_suspend(mtu); 780 781 if (u2comm & RESUME_INTR) 782 mtu3_gadget_resume(mtu); 783 784 if (u2comm & RESET_INTR) 785 mtu3_gadget_reset(mtu); 786 787 return IRQ_HANDLED; 788 } 789 790 static irqreturn_t mtu3_irq(int irq, void *data) 791 { 792 struct mtu3 *mtu = (struct mtu3 *)data; 793 unsigned long flags; 794 u32 level1; 795 796 spin_lock_irqsave(&mtu->lock, flags); 797 798 /* U3D_LV1ISR is RU */ 799 level1 = mtu3_readl(mtu->mac_base, U3D_LV1ISR); 800 level1 &= mtu3_readl(mtu->mac_base, U3D_LV1IER); 801 802 if (level1 & EP_CTRL_INTR) 803 mtu3_link_isr(mtu); 804 805 if (level1 & MAC2_INTR) 806 mtu3_u2_common_isr(mtu); 807 808 if (level1 & MAC3_INTR) 809 mtu3_u3_ltssm_isr(mtu); 810 811 if (level1 & BMU_INTR) 812 mtu3_ep0_isr(mtu); 813 814 if (level1 & QMU_INTR) 815 mtu3_qmu_isr(mtu); 816 817 spin_unlock_irqrestore(&mtu->lock, flags); 818 819 return IRQ_HANDLED; 820 } 821 822 static void mtu3_check_params(struct mtu3 *mtu) 823 { 824 /* check the max_speed parameter */ 825 switch (mtu->max_speed) { 826 case USB_SPEED_FULL: 827 case USB_SPEED_HIGH: 828 case USB_SPEED_SUPER: 829 case USB_SPEED_SUPER_PLUS: 830 break; 831 default: 832 dev_err(mtu->dev, "invalid max_speed: %s\n", 833 usb_speed_string(mtu->max_speed)); 834 fallthrough; 835 case USB_SPEED_UNKNOWN: 836 /* default as SSP */ 837 mtu->max_speed = USB_SPEED_SUPER_PLUS; 838 break; 839 } 840 841 if (!mtu->is_u3_ip && (mtu->max_speed > USB_SPEED_HIGH)) 842 mtu->max_speed = USB_SPEED_HIGH; 843 844 mtu->speed = mtu->max_speed; 845 846 dev_info(mtu->dev, "max_speed: %s\n", 847 usb_speed_string(mtu->max_speed)); 848 } 849 850 static int mtu3_hw_init(struct mtu3 *mtu) 851 { 852 u32 value; 853 int ret; 854 855 value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_TRUNK_VERS); 856 mtu->hw_version = IP_TRUNK_VERS(value); 857 mtu->gen2cp = !!(mtu->hw_version >= MTU3_TRUNK_VERS_1003); 858 859 value = mtu3_readl(mtu->ippc_base, U3D_SSUSB_IP_DEV_CAP); 860 mtu->is_u3_ip = !!SSUSB_IP_DEV_U3_PORT_NUM(value); 861 862 dev_info(mtu->dev, "IP version 0x%x(%s IP)\n", mtu->hw_version, 863 mtu->is_u3_ip ? "U3" : "U2"); 864 865 mtu3_check_params(mtu); 866 867 mtu3_device_reset(mtu); 868 869 ret = mtu3_device_enable(mtu); 870 if (ret) { 871 dev_err(mtu->dev, "device enable failed %d\n", ret); 872 return ret; 873 } 874 875 ret = mtu3_mem_alloc(mtu); 876 if (ret) 877 return -ENOMEM; 878 879 mtu3_regs_init(mtu); 880 881 return 0; 882 } 883 884 static void mtu3_hw_exit(struct mtu3 *mtu) 885 { 886 mtu3_device_disable(mtu); 887 mtu3_mem_free(mtu); 888 } 889 890 /* 891 * we set 32-bit DMA mask by default, here check whether the controller 892 * supports 36-bit DMA or not, if it does, set 36-bit DMA mask. 893 */ 894 static int mtu3_set_dma_mask(struct mtu3 *mtu) 895 { 896 struct device *dev = mtu->dev; 897 bool is_36bit = false; 898 int ret = 0; 899 u32 value; 900 901 value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL); 902 if (value & DMA_ADDR_36BIT) { 903 is_36bit = true; 904 ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36)); 905 /* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */ 906 if (ret) { 907 is_36bit = false; 908 ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); 909 } 910 } 911 dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32"); 912 913 return ret; 914 } 915 916 int ssusb_gadget_init(struct ssusb_mtk *ssusb) 917 { 918 struct device *dev = ssusb->dev; 919 struct platform_device *pdev = to_platform_device(dev); 920 struct mtu3 *mtu = NULL; 921 int ret = -ENOMEM; 922 923 mtu = devm_kzalloc(dev, sizeof(struct mtu3), GFP_KERNEL); 924 if (mtu == NULL) 925 return -ENOMEM; 926 927 mtu->irq = platform_get_irq_byname_optional(pdev, "device"); 928 if (mtu->irq < 0) { 929 if (mtu->irq == -EPROBE_DEFER) 930 return mtu->irq; 931 932 /* for backward compatibility */ 933 mtu->irq = platform_get_irq(pdev, 0); 934 if (mtu->irq < 0) 935 return mtu->irq; 936 } 937 dev_info(dev, "irq %d\n", mtu->irq); 938 939 mtu->mac_base = devm_platform_ioremap_resource_byname(pdev, "mac"); 940 if (IS_ERR(mtu->mac_base)) { 941 dev_err(dev, "error mapping memory for dev mac\n"); 942 return PTR_ERR(mtu->mac_base); 943 } 944 945 spin_lock_init(&mtu->lock); 946 mtu->dev = dev; 947 mtu->ippc_base = ssusb->ippc_base; 948 ssusb->mac_base = mtu->mac_base; 949 ssusb->u3d = mtu; 950 mtu->ssusb = ssusb; 951 mtu->max_speed = usb_get_maximum_speed(dev); 952 953 dev_dbg(dev, "mac_base=0x%p, ippc_base=0x%p\n", 954 mtu->mac_base, mtu->ippc_base); 955 956 ret = mtu3_hw_init(mtu); 957 if (ret) { 958 dev_err(dev, "mtu3 hw init failed:%d\n", ret); 959 return ret; 960 } 961 962 ret = mtu3_set_dma_mask(mtu); 963 if (ret) { 964 dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret); 965 goto dma_mask_err; 966 } 967 968 ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu); 969 if (ret) { 970 dev_err(dev, "request irq %d failed!\n", mtu->irq); 971 goto irq_err; 972 } 973 974 /* power down device IP for power saving by default */ 975 mtu3_stop(mtu); 976 977 ret = mtu3_gadget_setup(mtu); 978 if (ret) { 979 dev_err(dev, "mtu3 gadget init failed:%d\n", ret); 980 goto gadget_err; 981 } 982 983 ssusb_dev_debugfs_init(ssusb); 984 985 dev_dbg(dev, " %s() done...\n", __func__); 986 987 return 0; 988 989 gadget_err: 990 device_init_wakeup(dev, false); 991 992 dma_mask_err: 993 irq_err: 994 mtu3_hw_exit(mtu); 995 ssusb->u3d = NULL; 996 dev_err(dev, " %s() fail...\n", __func__); 997 998 return ret; 999 } 1000 1001 void ssusb_gadget_exit(struct ssusb_mtk *ssusb) 1002 { 1003 struct mtu3 *mtu = ssusb->u3d; 1004 1005 mtu3_gadget_cleanup(mtu); 1006 device_init_wakeup(ssusb->dev, false); 1007 mtu3_hw_exit(mtu); 1008 } 1009 1010 bool ssusb_gadget_ip_sleep_check(struct ssusb_mtk *ssusb) 1011 { 1012 struct mtu3 *mtu = ssusb->u3d; 1013 1014 /* host only, should wait for ip sleep */ 1015 if (!mtu) 1016 return true; 1017 1018 /* device is started and pullup D+, ip can sleep */ 1019 if (mtu->is_active && mtu->softconnect) 1020 return true; 1021 1022 /* ip can't sleep if not pullup D+ when support device mode */ 1023 return false; 1024 } 1025 1026 int ssusb_gadget_suspend(struct ssusb_mtk *ssusb, pm_message_t msg) 1027 { 1028 struct mtu3 *mtu = ssusb->u3d; 1029 1030 if (!mtu->gadget_driver) 1031 return 0; 1032 1033 if (mtu->connected) 1034 return -EBUSY; 1035 1036 mtu3_dev_suspend(mtu); 1037 synchronize_irq(mtu->irq); 1038 1039 return 0; 1040 } 1041 1042 int ssusb_gadget_resume(struct ssusb_mtk *ssusb, pm_message_t msg) 1043 { 1044 struct mtu3 *mtu = ssusb->u3d; 1045 1046 if (!mtu->gadget_driver) 1047 return 0; 1048 1049 mtu3_dev_resume(mtu); 1050 1051 return 0; 1052 } 1053