1 /* 2 * Native support for the I/O-Warrior USB devices 3 * 4 * Copyright (c) 2003-2005 Code Mercenaries GmbH 5 * written by Christian Lucht <lucht@codemercs.com> 6 * 7 * based on 8 9 * usb-skeleton.c by Greg Kroah-Hartman <greg@kroah.com> 10 * brlvger.c by Stephane Dalton <sdalton@videotron.ca> 11 * and St�hane Doyon <s.doyon@videotron.ca> 12 * 13 * Released under the GPLv2. 14 */ 15 16 #include <linux/module.h> 17 #include <linux/usb.h> 18 #include <linux/init.h> 19 #include <linux/slab.h> 20 #include <linux/sched.h> 21 #include <linux/poll.h> 22 #include <linux/version.h> 23 #include <linux/usb/iowarrior.h> 24 25 /* Version Information */ 26 #define DRIVER_VERSION "v0.4.0" 27 #define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>" 28 #define DRIVER_DESC "USB IO-Warrior driver (Linux 2.6.x)" 29 30 #define USB_VENDOR_ID_CODEMERCS 1984 31 /* low speed iowarrior */ 32 #define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500 33 #define USB_DEVICE_ID_CODEMERCS_IOW24 0x1501 34 #define USB_DEVICE_ID_CODEMERCS_IOWPV1 0x1511 35 #define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512 36 /* full speed iowarrior */ 37 #define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503 38 39 /* Get a minor range for your devices from the usb maintainer */ 40 #ifdef CONFIG_USB_DYNAMIC_MINORS 41 #define IOWARRIOR_MINOR_BASE 0 42 #else 43 #define IOWARRIOR_MINOR_BASE 208 // SKELETON_MINOR_BASE 192 + 16, not offical yet 44 #endif 45 46 /* interrupt input queue size */ 47 #define MAX_INTERRUPT_BUFFER 16 48 /* 49 maximum number of urbs that are submitted for writes at the same time, 50 this applies to the IOWarrior56 only! 51 IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls. 52 */ 53 #define MAX_WRITES_IN_FLIGHT 4 54 55 /* Use our own dbg macro */ 56 #undef dbg 57 #define dbg( format, arg... ) do { if( debug ) printk( KERN_DEBUG __FILE__ ": " format "\n" , ## arg ); } while ( 0 ) 58 59 MODULE_AUTHOR(DRIVER_AUTHOR); 60 MODULE_DESCRIPTION(DRIVER_DESC); 61 MODULE_LICENSE("GPL"); 62 63 /* Module parameters */ 64 static int debug = 0; 65 module_param(debug, bool, 0644); 66 MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); 67 68 static struct usb_driver iowarrior_driver; 69 70 /*--------------*/ 71 /* data */ 72 /*--------------*/ 73 74 /* Structure to hold all of our device specific stuff */ 75 struct iowarrior { 76 struct mutex mutex; /* locks this structure */ 77 struct usb_device *udev; /* save off the usb device pointer */ 78 struct usb_interface *interface; /* the interface for this device */ 79 unsigned char minor; /* the starting minor number for this device */ 80 struct usb_endpoint_descriptor *int_out_endpoint; /* endpoint for reading (needed for IOW56 only) */ 81 struct usb_endpoint_descriptor *int_in_endpoint; /* endpoint for reading */ 82 struct urb *int_in_urb; /* the urb for reading data */ 83 unsigned char *int_in_buffer; /* buffer for data to be read */ 84 unsigned char serial_number; /* to detect lost packages */ 85 unsigned char *read_queue; /* size is MAX_INTERRUPT_BUFFER * packet size */ 86 wait_queue_head_t read_wait; 87 wait_queue_head_t write_wait; /* wait-queue for writing to the device */ 88 atomic_t write_busy; /* number of write-urbs submitted */ 89 atomic_t read_idx; 90 atomic_t intr_idx; 91 spinlock_t intr_idx_lock; /* protects intr_idx */ 92 atomic_t overflow_flag; /* signals an index 'rollover' */ 93 int present; /* this is 1 as long as the device is connected */ 94 int opened; /* this is 1 if the device is currently open */ 95 char chip_serial[9]; /* the serial number string of the chip connected */ 96 int report_size; /* number of bytes in a report */ 97 u16 product_id; 98 }; 99 100 /*--------------*/ 101 /* globals */ 102 /*--------------*/ 103 /* prevent races between open() and disconnect() */ 104 static DECLARE_MUTEX(disconnect_sem); 105 106 /* 107 * USB spec identifies 5 second timeouts. 108 */ 109 #define GET_TIMEOUT 5 110 #define USB_REQ_GET_REPORT 0x01 111 //#if 0 112 static int usb_get_report(struct usb_device *dev, 113 struct usb_host_interface *inter, unsigned char type, 114 unsigned char id, void *buf, int size) 115 { 116 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 117 USB_REQ_GET_REPORT, 118 USB_DIR_IN | USB_TYPE_CLASS | 119 USB_RECIP_INTERFACE, (type << 8) + id, 120 inter->desc.bInterfaceNumber, buf, size, 121 GET_TIMEOUT*HZ); 122 } 123 //#endif 124 125 #define USB_REQ_SET_REPORT 0x09 126 127 static int usb_set_report(struct usb_interface *intf, unsigned char type, 128 unsigned char id, void *buf, int size) 129 { 130 return usb_control_msg(interface_to_usbdev(intf), 131 usb_sndctrlpipe(interface_to_usbdev(intf), 0), 132 USB_REQ_SET_REPORT, 133 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 134 (type << 8) + id, 135 intf->cur_altsetting->desc.bInterfaceNumber, buf, 136 size, HZ); 137 } 138 139 /*---------------------*/ 140 /* driver registration */ 141 /*---------------------*/ 142 /* table of devices that work with this driver */ 143 static struct usb_device_id iowarrior_ids[] = { 144 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)}, 145 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)}, 146 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)}, 147 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)}, 148 {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)}, 149 {} /* Terminating entry */ 150 }; 151 MODULE_DEVICE_TABLE(usb, iowarrior_ids); 152 153 /* 154 * USB callback handler for reading data 155 */ 156 static void iowarrior_callback(struct urb *urb) 157 { 158 struct iowarrior *dev = (struct iowarrior *)urb->context; 159 int intr_idx; 160 int read_idx; 161 int aux_idx; 162 int offset; 163 int status; 164 165 switch (urb->status) { 166 case 0: 167 /* success */ 168 break; 169 case -ECONNRESET: 170 case -ENOENT: 171 case -ESHUTDOWN: 172 return; 173 default: 174 goto exit; 175 } 176 177 spin_lock(&dev->intr_idx_lock); 178 intr_idx = atomic_read(&dev->intr_idx); 179 /* aux_idx become previous intr_idx */ 180 aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1); 181 read_idx = atomic_read(&dev->read_idx); 182 183 /* queue is not empty and it's interface 0 */ 184 if ((intr_idx != read_idx) 185 && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) { 186 /* + 1 for serial number */ 187 offset = aux_idx * (dev->report_size + 1); 188 if (!memcmp 189 (dev->read_queue + offset, urb->transfer_buffer, 190 dev->report_size)) { 191 /* equal values on interface 0 will be ignored */ 192 spin_unlock(&dev->intr_idx_lock); 193 goto exit; 194 } 195 } 196 197 /* aux_idx become next intr_idx */ 198 aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1); 199 if (read_idx == aux_idx) { 200 /* queue full, dropping oldest input */ 201 read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx; 202 atomic_set(&dev->read_idx, read_idx); 203 atomic_set(&dev->overflow_flag, 1); 204 } 205 206 /* +1 for serial number */ 207 offset = intr_idx * (dev->report_size + 1); 208 memcpy(dev->read_queue + offset, urb->transfer_buffer, 209 dev->report_size); 210 *(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++; 211 212 atomic_set(&dev->intr_idx, aux_idx); 213 spin_unlock(&dev->intr_idx_lock); 214 /* tell the blocking read about the new data */ 215 wake_up_interruptible(&dev->read_wait); 216 217 exit: 218 status = usb_submit_urb(urb, GFP_ATOMIC); 219 if (status) 220 dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d", 221 __FUNCTION__, status); 222 223 } 224 225 /* 226 * USB Callback handler for write-ops 227 */ 228 static void iowarrior_write_callback(struct urb *urb) 229 { 230 struct iowarrior *dev; 231 dev = (struct iowarrior *)urb->context; 232 /* sync/async unlink faults aren't errors */ 233 if (urb->status && 234 !(urb->status == -ENOENT || 235 urb->status == -ECONNRESET || urb->status == -ESHUTDOWN)) { 236 dbg("%s - nonzero write bulk status received: %d", 237 __func__, urb->status); 238 } 239 /* free up our allocated buffer */ 240 usb_buffer_free(urb->dev, urb->transfer_buffer_length, 241 urb->transfer_buffer, urb->transfer_dma); 242 /* tell a waiting writer the interrupt-out-pipe is available again */ 243 atomic_dec(&dev->write_busy); 244 wake_up_interruptible(&dev->write_wait); 245 } 246 247 /** 248 * iowarrior_delete 249 */ 250 static inline void iowarrior_delete(struct iowarrior *dev) 251 { 252 dbg("%s - minor %d", __func__, dev->minor); 253 kfree(dev->int_in_buffer); 254 usb_free_urb(dev->int_in_urb); 255 kfree(dev->read_queue); 256 kfree(dev); 257 } 258 259 /*---------------------*/ 260 /* fops implementation */ 261 /*---------------------*/ 262 263 static int read_index(struct iowarrior *dev) 264 { 265 int intr_idx, read_idx; 266 267 read_idx = atomic_read(&dev->read_idx); 268 intr_idx = atomic_read(&dev->intr_idx); 269 270 return (read_idx == intr_idx ? -1 : read_idx); 271 } 272 273 /** 274 * iowarrior_read 275 */ 276 static ssize_t iowarrior_read(struct file *file, char __user *buffer, 277 size_t count, loff_t *ppos) 278 { 279 struct iowarrior *dev; 280 int read_idx; 281 int offset; 282 283 dev = (struct iowarrior *)file->private_data; 284 285 /* verify that the device wasn't unplugged */ 286 if (dev == NULL || !dev->present) 287 return -ENODEV; 288 289 dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); 290 291 /* read count must be packet size (+ time stamp) */ 292 if ((count != dev->report_size) 293 && (count != (dev->report_size + 1))) 294 return -EINVAL; 295 296 /* repeat until no buffer overrun in callback handler occur */ 297 do { 298 atomic_set(&dev->overflow_flag, 0); 299 if ((read_idx = read_index(dev)) == -1) { 300 /* queue emty */ 301 if (file->f_flags & O_NONBLOCK) 302 return -EAGAIN; 303 else { 304 //next line will return when there is either new data, or the device is unplugged 305 int r = wait_event_interruptible(dev->read_wait, 306 (!dev->present 307 || (read_idx = 308 read_index 309 (dev)) != 310 -1)); 311 if (r) { 312 //we were interrupted by a signal 313 return -ERESTART; 314 } 315 if (!dev->present) { 316 //The device was unplugged 317 return -ENODEV; 318 } 319 if (read_idx == -1) { 320 // Can this happen ??? 321 return 0; 322 } 323 } 324 } 325 326 offset = read_idx * (dev->report_size + 1); 327 if (copy_to_user(buffer, dev->read_queue + offset, count)) { 328 return -EFAULT; 329 } 330 } while (atomic_read(&dev->overflow_flag)); 331 332 read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx; 333 atomic_set(&dev->read_idx, read_idx); 334 return count; 335 } 336 337 /* 338 * iowarrior_write 339 */ 340 static ssize_t iowarrior_write(struct file *file, 341 const char __user *user_buffer, 342 size_t count, loff_t *ppos) 343 { 344 struct iowarrior *dev; 345 int retval = 0; 346 char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */ 347 struct urb *int_out_urb = NULL; 348 349 dev = (struct iowarrior *)file->private_data; 350 351 mutex_lock(&dev->mutex); 352 /* verify that the device wasn't unplugged */ 353 if (dev == NULL || !dev->present) { 354 retval = -ENODEV; 355 goto exit; 356 } 357 dbg("%s - minor %d, count = %zd", __func__, dev->minor, count); 358 /* if count is 0 we're already done */ 359 if (count == 0) { 360 retval = 0; 361 goto exit; 362 } 363 /* We only accept full reports */ 364 if (count != dev->report_size) { 365 retval = -EINVAL; 366 goto exit; 367 } 368 switch (dev->product_id) { 369 case USB_DEVICE_ID_CODEMERCS_IOW24: 370 case USB_DEVICE_ID_CODEMERCS_IOWPV1: 371 case USB_DEVICE_ID_CODEMERCS_IOWPV2: 372 case USB_DEVICE_ID_CODEMERCS_IOW40: 373 /* IOW24 and IOW40 use a synchronous call */ 374 buf = kmalloc(8, GFP_KERNEL); /* 8 bytes are enough for both products */ 375 if (!buf) { 376 retval = -ENOMEM; 377 goto exit; 378 } 379 if (copy_from_user(buf, user_buffer, count)) { 380 retval = -EFAULT; 381 kfree(buf); 382 goto exit; 383 } 384 retval = usb_set_report(dev->interface, 2, 0, buf, count); 385 kfree(buf); 386 goto exit; 387 break; 388 case USB_DEVICE_ID_CODEMERCS_IOW56: 389 /* The IOW56 uses asynchronous IO and more urbs */ 390 if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) { 391 /* Wait until we are below the limit for submitted urbs */ 392 if (file->f_flags & O_NONBLOCK) { 393 retval = -EAGAIN; 394 goto exit; 395 } else { 396 retval = wait_event_interruptible(dev->write_wait, 397 (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT))); 398 if (retval) { 399 /* we were interrupted by a signal */ 400 retval = -ERESTART; 401 goto exit; 402 } 403 if (!dev->present) { 404 /* The device was unplugged */ 405 retval = -ENODEV; 406 goto exit; 407 } 408 if (!dev->opened) { 409 /* We were closed while waiting for an URB */ 410 retval = -ENODEV; 411 goto exit; 412 } 413 } 414 } 415 atomic_inc(&dev->write_busy); 416 int_out_urb = usb_alloc_urb(0, GFP_KERNEL); 417 if (!int_out_urb) { 418 retval = -ENOMEM; 419 dbg("%s Unable to allocate urb ", __func__); 420 goto error_no_urb; 421 } 422 buf = usb_buffer_alloc(dev->udev, dev->report_size, 423 GFP_KERNEL, &int_out_urb->transfer_dma); 424 if (!buf) { 425 retval = -ENOMEM; 426 dbg("%s Unable to allocate buffer ", __func__); 427 goto error_no_buffer; 428 } 429 usb_fill_int_urb(int_out_urb, dev->udev, 430 usb_sndintpipe(dev->udev, 431 dev->int_out_endpoint->bEndpointAddress), 432 buf, dev->report_size, 433 iowarrior_write_callback, dev, 434 dev->int_out_endpoint->bInterval); 435 int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 436 if (copy_from_user(buf, user_buffer, count)) { 437 retval = -EFAULT; 438 goto error; 439 } 440 retval = usb_submit_urb(int_out_urb, GFP_KERNEL); 441 if (retval) { 442 dbg("%s submit error %d for urb nr.%d", __func__, 443 retval, atomic_read(&dev->write_busy)); 444 goto error; 445 } 446 /* submit was ok */ 447 retval = count; 448 usb_free_urb(int_out_urb); 449 goto exit; 450 break; 451 default: 452 /* what do we have here ? An unsupported Product-ID ? */ 453 dev_err(&dev->interface->dev, "%s - not supported for product=0x%x", 454 __FUNCTION__, dev->product_id); 455 retval = -EFAULT; 456 goto exit; 457 break; 458 } 459 error: 460 usb_buffer_free(dev->udev, dev->report_size, buf, 461 int_out_urb->transfer_dma); 462 error_no_buffer: 463 usb_free_urb(int_out_urb); 464 error_no_urb: 465 atomic_dec(&dev->write_busy); 466 wake_up_interruptible(&dev->write_wait); 467 exit: 468 mutex_unlock(&dev->mutex); 469 return retval; 470 } 471 472 /** 473 * iowarrior_ioctl 474 */ 475 static int iowarrior_ioctl(struct inode *inode, struct file *file, 476 unsigned int cmd, unsigned long arg) 477 { 478 struct iowarrior *dev = NULL; 479 __u8 *buffer; 480 __u8 __user *user_buffer; 481 int retval; 482 int io_res; /* checks for bytes read/written and copy_to/from_user results */ 483 484 dev = (struct iowarrior *)file->private_data; 485 if (dev == NULL) { 486 return -ENODEV; 487 } 488 489 buffer = kzalloc(dev->report_size, GFP_KERNEL); 490 if (!buffer) 491 return -ENOMEM; 492 493 /* lock this object */ 494 mutex_lock(&dev->mutex); 495 496 /* verify that the device wasn't unplugged */ 497 if (!dev->present) { 498 retval = -ENODEV; 499 goto error_out; 500 } 501 502 dbg("%s - minor %d, cmd 0x%.4x, arg %ld", __func__, dev->minor, cmd, 503 arg); 504 505 retval = 0; 506 io_res = 0; 507 switch (cmd) { 508 case IOW_WRITE: 509 if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 || 510 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 || 511 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 || 512 dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) { 513 user_buffer = (__u8 __user *)arg; 514 io_res = copy_from_user(buffer, user_buffer, 515 dev->report_size); 516 if (io_res) { 517 retval = -EFAULT; 518 } else { 519 io_res = usb_set_report(dev->interface, 2, 0, 520 buffer, 521 dev->report_size); 522 if (io_res < 0) 523 retval = io_res; 524 } 525 } else { 526 retval = -EINVAL; 527 dev_err(&dev->interface->dev, 528 "ioctl 'IOW_WRITE' is not supported for product=0x%x.", 529 dev->product_id); 530 } 531 break; 532 case IOW_READ: 533 user_buffer = (__u8 __user *)arg; 534 io_res = usb_get_report(dev->udev, 535 dev->interface->cur_altsetting, 1, 0, 536 buffer, dev->report_size); 537 if (io_res < 0) 538 retval = io_res; 539 else { 540 io_res = copy_to_user(user_buffer, buffer, dev->report_size); 541 if (io_res < 0) 542 retval = -EFAULT; 543 } 544 break; 545 case IOW_GETINFO: 546 { 547 /* Report available information for the device */ 548 struct iowarrior_info info; 549 /* needed for power consumption */ 550 struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc; 551 552 /* directly from the descriptor */ 553 info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); 554 info.product = dev->product_id; 555 info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice); 556 557 /* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */ 558 info.speed = le16_to_cpu(dev->udev->speed); 559 info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber; 560 info.report_size = dev->report_size; 561 562 /* serial number string has been read earlier 8 chars or empty string */ 563 memcpy(info.serial, dev->chip_serial, 564 sizeof(dev->chip_serial)); 565 if (cfg_descriptor == NULL) { 566 info.power = -1; /* no information available */ 567 } else { 568 /* the MaxPower is stored in units of 2mA to make it fit into a byte-value */ 569 info.power = cfg_descriptor->bMaxPower * 2; 570 } 571 io_res = copy_to_user((struct iowarrior_info __user *)arg, &info, 572 sizeof(struct iowarrior_info)); 573 if (io_res < 0) 574 retval = -EFAULT; 575 break; 576 } 577 default: 578 /* return that we did not understand this ioctl call */ 579 retval = -ENOTTY; 580 break; 581 } 582 error_out: 583 /* unlock the device */ 584 mutex_unlock(&dev->mutex); 585 kfree(buffer); 586 return retval; 587 } 588 589 /** 590 * iowarrior_open 591 */ 592 static int iowarrior_open(struct inode *inode, struct file *file) 593 { 594 struct iowarrior *dev = NULL; 595 struct usb_interface *interface; 596 int subminor; 597 int retval = 0; 598 599 dbg("%s", __func__); 600 601 subminor = iminor(inode); 602 603 /* prevent disconnects */ 604 down(&disconnect_sem); 605 606 interface = usb_find_interface(&iowarrior_driver, subminor); 607 if (!interface) { 608 err("%s - error, can't find device for minor %d", __FUNCTION__, 609 subminor); 610 retval = -ENODEV; 611 goto out; 612 } 613 614 dev = usb_get_intfdata(interface); 615 if (!dev) { 616 retval = -ENODEV; 617 goto out; 618 } 619 620 /* Only one process can open each device, no sharing. */ 621 if (dev->opened) { 622 retval = -EBUSY; 623 goto out; 624 } 625 626 /* setup interrupt handler for receiving values */ 627 if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) { 628 dev_err(&interface->dev, "Error %d while submitting URB\n", retval); 629 retval = -EFAULT; 630 goto out; 631 } 632 /* increment our usage count for the driver */ 633 ++dev->opened; 634 /* save our object in the file's private structure */ 635 file->private_data = dev; 636 retval = 0; 637 638 out: 639 up(&disconnect_sem); 640 return retval; 641 } 642 643 /** 644 * iowarrior_release 645 */ 646 static int iowarrior_release(struct inode *inode, struct file *file) 647 { 648 struct iowarrior *dev; 649 int retval = 0; 650 651 dev = (struct iowarrior *)file->private_data; 652 if (dev == NULL) { 653 return -ENODEV; 654 } 655 656 dbg("%s - minor %d", __func__, dev->minor); 657 658 /* lock our device */ 659 mutex_lock(&dev->mutex); 660 661 if (dev->opened <= 0) { 662 retval = -ENODEV; /* close called more than once */ 663 mutex_unlock(&dev->mutex); 664 } else { 665 dev->opened = 0; /* we're closeing now */ 666 retval = 0; 667 if (dev->present) { 668 /* 669 The device is still connected so we only shutdown 670 pending read-/write-ops. 671 */ 672 usb_kill_urb(dev->int_in_urb); 673 wake_up_interruptible(&dev->read_wait); 674 wake_up_interruptible(&dev->write_wait); 675 mutex_unlock(&dev->mutex); 676 } else { 677 /* The device was unplugged, cleanup resources */ 678 mutex_unlock(&dev->mutex); 679 iowarrior_delete(dev); 680 } 681 } 682 return retval; 683 } 684 685 static unsigned iowarrior_poll(struct file *file, poll_table * wait) 686 { 687 struct iowarrior *dev = file->private_data; 688 unsigned int mask = 0; 689 690 if (!dev->present) 691 return POLLERR | POLLHUP; 692 693 poll_wait(file, &dev->read_wait, wait); 694 poll_wait(file, &dev->write_wait, wait); 695 696 if (!dev->present) 697 return POLLERR | POLLHUP; 698 699 if (read_index(dev) != -1) 700 mask |= POLLIN | POLLRDNORM; 701 702 if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT) 703 mask |= POLLOUT | POLLWRNORM; 704 return mask; 705 } 706 707 /* 708 * File operations needed when we register this driver. 709 * This assumes that this driver NEEDS file operations, 710 * of course, which means that the driver is expected 711 * to have a node in the /dev directory. If the USB 712 * device were for a network interface then the driver 713 * would use "struct net_driver" instead, and a serial 714 * device would use "struct tty_driver". 715 */ 716 static struct file_operations iowarrior_fops = { 717 .owner = THIS_MODULE, 718 .write = iowarrior_write, 719 .read = iowarrior_read, 720 .ioctl = iowarrior_ioctl, 721 .open = iowarrior_open, 722 .release = iowarrior_release, 723 .poll = iowarrior_poll, 724 }; 725 726 /* 727 * usb class driver info in order to get a minor number from the usb core, 728 * and to have the device registered with devfs and the driver core 729 */ 730 static struct usb_class_driver iowarrior_class = { 731 .name = "iowarrior%d", 732 .fops = &iowarrior_fops, 733 .minor_base = IOWARRIOR_MINOR_BASE, 734 }; 735 736 /*---------------------------------*/ 737 /* probe and disconnect functions */ 738 /*---------------------------------*/ 739 /** 740 * iowarrior_probe 741 * 742 * Called by the usb core when a new device is connected that it thinks 743 * this driver might be interested in. 744 */ 745 static int iowarrior_probe(struct usb_interface *interface, 746 const struct usb_device_id *id) 747 { 748 struct usb_device *udev = interface_to_usbdev(interface); 749 struct iowarrior *dev = NULL; 750 struct usb_host_interface *iface_desc; 751 struct usb_endpoint_descriptor *endpoint; 752 int i; 753 int retval = -ENOMEM; 754 755 /* allocate memory for our device state and intialize it */ 756 dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); 757 if (dev == NULL) { 758 dev_err(&interface->dev, "Out of memory"); 759 return retval; 760 } 761 762 mutex_init(&dev->mutex); 763 764 atomic_set(&dev->intr_idx, 0); 765 atomic_set(&dev->read_idx, 0); 766 spin_lock_init(&dev->intr_idx_lock); 767 atomic_set(&dev->overflow_flag, 0); 768 init_waitqueue_head(&dev->read_wait); 769 atomic_set(&dev->write_busy, 0); 770 init_waitqueue_head(&dev->write_wait); 771 772 dev->udev = udev; 773 dev->interface = interface; 774 775 iface_desc = interface->cur_altsetting; 776 dev->product_id = le16_to_cpu(udev->descriptor.idProduct); 777 778 /* set up the endpoint information */ 779 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { 780 endpoint = &iface_desc->endpoint[i].desc; 781 782 if (usb_endpoint_is_int_in(endpoint)) 783 dev->int_in_endpoint = endpoint; 784 if (usb_endpoint_is_int_out(endpoint)) 785 /* this one will match for the IOWarrior56 only */ 786 dev->int_out_endpoint = endpoint; 787 } 788 /* we have to check the report_size often, so remember it in the endianess suitable for our machine */ 789 dev->report_size = le16_to_cpu(dev->int_in_endpoint->wMaxPacketSize); 790 if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && 791 (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56)) 792 /* IOWarrior56 has wMaxPacketSize different from report size */ 793 dev->report_size = 7; 794 795 /* create the urb and buffer for reading */ 796 dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL); 797 if (!dev->int_in_urb) { 798 dev_err(&interface->dev, "Couldn't allocate interrupt_in_urb\n"); 799 goto error; 800 } 801 dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL); 802 if (!dev->int_in_buffer) { 803 dev_err(&interface->dev, "Couldn't allocate int_in_buffer\n"); 804 goto error; 805 } 806 usb_fill_int_urb(dev->int_in_urb, dev->udev, 807 usb_rcvintpipe(dev->udev, 808 dev->int_in_endpoint->bEndpointAddress), 809 dev->int_in_buffer, dev->report_size, 810 iowarrior_callback, dev, 811 dev->int_in_endpoint->bInterval); 812 /* create an internal buffer for interrupt data from the device */ 813 dev->read_queue = 814 kmalloc(((dev->report_size + 1) * MAX_INTERRUPT_BUFFER), 815 GFP_KERNEL); 816 if (!dev->read_queue) { 817 dev_err(&interface->dev, "Couldn't allocate read_queue\n"); 818 goto error; 819 } 820 /* Get the serial-number of the chip */ 821 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial)); 822 usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial, 823 sizeof(dev->chip_serial)); 824 if (strlen(dev->chip_serial) != 8) 825 memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial)); 826 827 /* Set the idle timeout to 0, if this is interface 0 */ 828 if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) { 829 usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 830 0x0A, 831 USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, 832 0, NULL, 0, USB_CTRL_SET_TIMEOUT); 833 } 834 /* allow device read and ioctl */ 835 dev->present = 1; 836 837 /* we can register the device now, as it is ready */ 838 usb_set_intfdata(interface, dev); 839 840 retval = usb_register_dev(interface, &iowarrior_class); 841 if (retval) { 842 /* something prevented us from registering this driver */ 843 dev_err(&interface->dev, "Not able to get a minor for this device.\n"); 844 usb_set_intfdata(interface, NULL); 845 goto error; 846 } 847 848 dev->minor = interface->minor; 849 850 /* let the user know what node this device is now attached to */ 851 dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d " 852 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial, 853 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE); 854 return retval; 855 856 error: 857 iowarrior_delete(dev); 858 return retval; 859 } 860 861 /** 862 * iowarrior_disconnect 863 * 864 * Called by the usb core when the device is removed from the system. 865 */ 866 static void iowarrior_disconnect(struct usb_interface *interface) 867 { 868 struct iowarrior *dev; 869 int minor; 870 871 /* prevent races with open() */ 872 down(&disconnect_sem); 873 874 dev = usb_get_intfdata(interface); 875 usb_set_intfdata(interface, NULL); 876 877 mutex_lock(&dev->mutex); 878 879 minor = dev->minor; 880 881 /* give back our minor */ 882 usb_deregister_dev(interface, &iowarrior_class); 883 884 /* prevent device read, write and ioctl */ 885 dev->present = 0; 886 887 mutex_unlock(&dev->mutex); 888 889 if (dev->opened) { 890 /* There is a process that holds a filedescriptor to the device , 891 so we only shutdown read-/write-ops going on. 892 Deleting the device is postponed until close() was called. 893 */ 894 usb_kill_urb(dev->int_in_urb); 895 wake_up_interruptible(&dev->read_wait); 896 wake_up_interruptible(&dev->write_wait); 897 } else { 898 /* no process is using the device, cleanup now */ 899 iowarrior_delete(dev); 900 } 901 up(&disconnect_sem); 902 903 dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n", 904 minor - IOWARRIOR_MINOR_BASE); 905 } 906 907 /* usb specific object needed to register this driver with the usb subsystem */ 908 static struct usb_driver iowarrior_driver = { 909 .name = "iowarrior", 910 .probe = iowarrior_probe, 911 .disconnect = iowarrior_disconnect, 912 .id_table = iowarrior_ids, 913 }; 914 915 static int __init iowarrior_init(void) 916 { 917 return usb_register(&iowarrior_driver); 918 } 919 920 static void __exit iowarrior_exit(void) 921 { 922 usb_deregister(&iowarrior_driver); 923 } 924 925 module_init(iowarrior_init); 926 module_exit(iowarrior_exit); 927