xref: /openbmc/linux/drivers/usb/misc/iowarrior.c (revision 48cc39c3)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Native support for the I/O-Warrior USB devices
4  *
5  *  Copyright (c) 2003-2005, 2020  Code Mercenaries GmbH
6  *  written by Christian Lucht <lucht@codemercs.com> and
7  *  Christoph Jung <jung@codemercs.com>
8  *
9  *  based on
10 
11  *  usb-skeleton.c by Greg Kroah-Hartman  <greg@kroah.com>
12  *  brlvger.c by Stephane Dalton  <sdalton@videotron.ca>
13  *           and Stephane Doyon   <s.doyon@videotron.ca>
14  *
15  *  Released under the GPLv2.
16  */
17 
18 #include <linux/module.h>
19 #include <linux/usb.h>
20 #include <linux/slab.h>
21 #include <linux/sched.h>
22 #include <linux/mutex.h>
23 #include <linux/poll.h>
24 #include <linux/usb/iowarrior.h>
25 
26 #define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
27 #define DRIVER_DESC "USB IO-Warrior driver"
28 
29 #define USB_VENDOR_ID_CODEMERCS		1984
30 /* low speed iowarrior */
31 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
32 #define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
33 #define USB_DEVICE_ID_CODEMERCS_IOWPV1	0x1511
34 #define USB_DEVICE_ID_CODEMERCS_IOWPV2	0x1512
35 /* full speed iowarrior */
36 #define USB_DEVICE_ID_CODEMERCS_IOW56	0x1503
37 /* fuller speed iowarrior */
38 #define USB_DEVICE_ID_CODEMERCS_IOW28	0x1504
39 #define USB_DEVICE_ID_CODEMERCS_IOW28L	0x1505
40 #define USB_DEVICE_ID_CODEMERCS_IOW100	0x1506
41 
42 /* OEMed devices */
43 #define USB_DEVICE_ID_CODEMERCS_IOW24SAG	0x158a
44 #define USB_DEVICE_ID_CODEMERCS_IOW56AM		0x158b
45 
46 /* Get a minor range for your devices from the usb maintainer */
47 #ifdef CONFIG_USB_DYNAMIC_MINORS
48 #define IOWARRIOR_MINOR_BASE	0
49 #else
50 #define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not official yet
51 #endif
52 
53 /* interrupt input queue size */
54 #define MAX_INTERRUPT_BUFFER 16
55 /*
56    maximum number of urbs that are submitted for writes at the same time,
57    this applies to the IOWarrior56 only!
58    IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
59 */
60 #define MAX_WRITES_IN_FLIGHT 4
61 
62 MODULE_AUTHOR(DRIVER_AUTHOR);
63 MODULE_DESCRIPTION(DRIVER_DESC);
64 MODULE_LICENSE("GPL");
65 
66 static struct usb_driver iowarrior_driver;
67 
68 /*--------------*/
69 /*     data     */
70 /*--------------*/
71 
72 /* Structure to hold all of our device specific stuff */
73 struct iowarrior {
74 	struct mutex mutex;			/* locks this structure */
75 	struct usb_device *udev;		/* save off the usb device pointer */
76 	struct usb_interface *interface;	/* the interface for this device */
77 	unsigned char minor;			/* the starting minor number for this device */
78 	struct usb_endpoint_descriptor *int_out_endpoint;	/* endpoint for reading (needed for IOW56 only) */
79 	struct usb_endpoint_descriptor *int_in_endpoint;	/* endpoint for reading */
80 	struct urb *int_in_urb;		/* the urb for reading data */
81 	unsigned char *int_in_buffer;	/* buffer for data to be read */
82 	unsigned char serial_number;	/* to detect lost packages */
83 	unsigned char *read_queue;	/* size is MAX_INTERRUPT_BUFFER * packet size */
84 	wait_queue_head_t read_wait;
85 	wait_queue_head_t write_wait;	/* wait-queue for writing to the device */
86 	atomic_t write_busy;		/* number of write-urbs submitted */
87 	atomic_t read_idx;
88 	atomic_t intr_idx;
89 	atomic_t overflow_flag;		/* signals an index 'rollover' */
90 	int present;			/* this is 1 as long as the device is connected */
91 	int opened;			/* this is 1 if the device is currently open */
92 	char chip_serial[9];		/* the serial number string of the chip connected */
93 	int report_size;		/* number of bytes in a report */
94 	u16 product_id;
95 	struct usb_anchor submitted;
96 };
97 
98 /*--------------*/
99 /*    globals   */
100 /*--------------*/
101 
102 /*
103  *  USB spec identifies 5 second timeouts.
104  */
105 #define GET_TIMEOUT 5
106 #define USB_REQ_GET_REPORT  0x01
107 //#if 0
108 static int usb_get_report(struct usb_device *dev,
109 			  struct usb_host_interface *inter, unsigned char type,
110 			  unsigned char id, void *buf, int size)
111 {
112 	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
113 			       USB_REQ_GET_REPORT,
114 			       USB_DIR_IN | USB_TYPE_CLASS |
115 			       USB_RECIP_INTERFACE, (type << 8) + id,
116 			       inter->desc.bInterfaceNumber, buf, size,
117 			       GET_TIMEOUT*HZ);
118 }
119 //#endif
120 
121 #define USB_REQ_SET_REPORT 0x09
122 
123 static int usb_set_report(struct usb_interface *intf, unsigned char type,
124 			  unsigned char id, void *buf, int size)
125 {
126 	return usb_control_msg(interface_to_usbdev(intf),
127 			       usb_sndctrlpipe(interface_to_usbdev(intf), 0),
128 			       USB_REQ_SET_REPORT,
129 			       USB_TYPE_CLASS | USB_RECIP_INTERFACE,
130 			       (type << 8) + id,
131 			       intf->cur_altsetting->desc.bInterfaceNumber, buf,
132 			       size, HZ);
133 }
134 
135 /*---------------------*/
136 /* driver registration */
137 /*---------------------*/
138 /* table of devices that work with this driver */
139 static const struct usb_device_id iowarrior_ids[] = {
140 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
141 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
142 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
143 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
144 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
145 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
146 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
147 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
148 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
149 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW100)},
150 	{}			/* Terminating entry */
151 };
152 MODULE_DEVICE_TABLE(usb, iowarrior_ids);
153 
154 /*
155  * USB callback handler for reading data
156  */
157 static void iowarrior_callback(struct urb *urb)
158 {
159 	struct iowarrior *dev = urb->context;
160 	int intr_idx;
161 	int read_idx;
162 	int aux_idx;
163 	int offset;
164 	int status = urb->status;
165 	int retval;
166 
167 	switch (status) {
168 	case 0:
169 		/* success */
170 		break;
171 	case -ECONNRESET:
172 	case -ENOENT:
173 	case -ESHUTDOWN:
174 		return;
175 	default:
176 		goto exit;
177 	}
178 
179 	intr_idx = atomic_read(&dev->intr_idx);
180 	/* aux_idx become previous intr_idx */
181 	aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
182 	read_idx = atomic_read(&dev->read_idx);
183 
184 	/* queue is not empty and it's interface 0 */
185 	if ((intr_idx != read_idx)
186 	    && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
187 		/* + 1 for serial number */
188 		offset = aux_idx * (dev->report_size + 1);
189 		if (!memcmp
190 		    (dev->read_queue + offset, urb->transfer_buffer,
191 		     dev->report_size)) {
192 			/* equal values on interface 0 will be ignored */
193 			goto exit;
194 		}
195 	}
196 
197 	/* aux_idx become next intr_idx */
198 	aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
199 	if (read_idx == aux_idx) {
200 		/* queue full, dropping oldest input */
201 		read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
202 		atomic_set(&dev->read_idx, read_idx);
203 		atomic_set(&dev->overflow_flag, 1);
204 	}
205 
206 	/* +1 for serial number */
207 	offset = intr_idx * (dev->report_size + 1);
208 	memcpy(dev->read_queue + offset, urb->transfer_buffer,
209 	       dev->report_size);
210 	*(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
211 
212 	atomic_set(&dev->intr_idx, aux_idx);
213 	/* tell the blocking read about the new data */
214 	wake_up_interruptible(&dev->read_wait);
215 
216 exit:
217 	retval = usb_submit_urb(urb, GFP_ATOMIC);
218 	if (retval)
219 		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
220 			__func__, retval);
221 
222 }
223 
224 /*
225  * USB Callback handler for write-ops
226  */
227 static void iowarrior_write_callback(struct urb *urb)
228 {
229 	struct iowarrior *dev;
230 	int status = urb->status;
231 
232 	dev = urb->context;
233 	/* sync/async unlink faults aren't errors */
234 	if (status &&
235 	    !(status == -ENOENT ||
236 	      status == -ECONNRESET || status == -ESHUTDOWN)) {
237 		dev_dbg(&dev->interface->dev,
238 			"nonzero write bulk status received: %d\n", status);
239 	}
240 	/* free up our allocated buffer */
241 	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
242 			  urb->transfer_buffer, urb->transfer_dma);
243 	/* tell a waiting writer the interrupt-out-pipe is available again */
244 	atomic_dec(&dev->write_busy);
245 	wake_up_interruptible(&dev->write_wait);
246 }
247 
248 /*
249  *	iowarrior_delete
250  */
251 static inline void iowarrior_delete(struct iowarrior *dev)
252 {
253 	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
254 	kfree(dev->int_in_buffer);
255 	usb_free_urb(dev->int_in_urb);
256 	kfree(dev->read_queue);
257 	usb_put_intf(dev->interface);
258 	kfree(dev);
259 }
260 
261 /*---------------------*/
262 /* fops implementation */
263 /*---------------------*/
264 
265 static int read_index(struct iowarrior *dev)
266 {
267 	int intr_idx, read_idx;
268 
269 	read_idx = atomic_read(&dev->read_idx);
270 	intr_idx = atomic_read(&dev->intr_idx);
271 
272 	return (read_idx == intr_idx ? -1 : read_idx);
273 }
274 
275 /*
276  *  iowarrior_read
277  */
278 static ssize_t iowarrior_read(struct file *file, char __user *buffer,
279 			      size_t count, loff_t *ppos)
280 {
281 	struct iowarrior *dev;
282 	int read_idx;
283 	int offset;
284 
285 	dev = file->private_data;
286 
287 	/* verify that the device wasn't unplugged */
288 	if (!dev || !dev->present)
289 		return -ENODEV;
290 
291 	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
292 		dev->minor, count);
293 
294 	/* read count must be packet size (+ time stamp) */
295 	if ((count != dev->report_size)
296 	    && (count != (dev->report_size + 1)))
297 		return -EINVAL;
298 
299 	/* repeat until no buffer overrun in callback handler occur */
300 	do {
301 		atomic_set(&dev->overflow_flag, 0);
302 		if ((read_idx = read_index(dev)) == -1) {
303 			/* queue empty */
304 			if (file->f_flags & O_NONBLOCK)
305 				return -EAGAIN;
306 			else {
307 				//next line will return when there is either new data, or the device is unplugged
308 				int r = wait_event_interruptible(dev->read_wait,
309 								 (!dev->present
310 								  || (read_idx =
311 								      read_index
312 								      (dev)) !=
313 								  -1));
314 				if (r) {
315 					//we were interrupted by a signal
316 					return -ERESTART;
317 				}
318 				if (!dev->present) {
319 					//The device was unplugged
320 					return -ENODEV;
321 				}
322 				if (read_idx == -1) {
323 					// Can this happen ???
324 					return 0;
325 				}
326 			}
327 		}
328 
329 		offset = read_idx * (dev->report_size + 1);
330 		if (copy_to_user(buffer, dev->read_queue + offset, count)) {
331 			return -EFAULT;
332 		}
333 	} while (atomic_read(&dev->overflow_flag));
334 
335 	read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
336 	atomic_set(&dev->read_idx, read_idx);
337 	return count;
338 }
339 
340 /*
341  * iowarrior_write
342  */
343 static ssize_t iowarrior_write(struct file *file,
344 			       const char __user *user_buffer,
345 			       size_t count, loff_t *ppos)
346 {
347 	struct iowarrior *dev;
348 	int retval = 0;
349 	char *buf = NULL;	/* for IOW24 and IOW56 we need a buffer */
350 	struct urb *int_out_urb = NULL;
351 
352 	dev = file->private_data;
353 
354 	mutex_lock(&dev->mutex);
355 	/* verify that the device wasn't unplugged */
356 	if (!dev->present) {
357 		retval = -ENODEV;
358 		goto exit;
359 	}
360 	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
361 		dev->minor, count);
362 	/* if count is 0 we're already done */
363 	if (count == 0) {
364 		retval = 0;
365 		goto exit;
366 	}
367 	/* We only accept full reports */
368 	if (count != dev->report_size) {
369 		retval = -EINVAL;
370 		goto exit;
371 	}
372 	switch (dev->product_id) {
373 	case USB_DEVICE_ID_CODEMERCS_IOW24:
374 	case USB_DEVICE_ID_CODEMERCS_IOW24SAG:
375 	case USB_DEVICE_ID_CODEMERCS_IOWPV1:
376 	case USB_DEVICE_ID_CODEMERCS_IOWPV2:
377 	case USB_DEVICE_ID_CODEMERCS_IOW40:
378 		/* IOW24 and IOW40 use a synchronous call */
379 		buf = memdup_user(user_buffer, count);
380 		if (IS_ERR(buf)) {
381 			retval = PTR_ERR(buf);
382 			goto exit;
383 		}
384 		retval = usb_set_report(dev->interface, 2, 0, buf, count);
385 		kfree(buf);
386 		goto exit;
387 	case USB_DEVICE_ID_CODEMERCS_IOW56:
388 	case USB_DEVICE_ID_CODEMERCS_IOW56AM:
389 	case USB_DEVICE_ID_CODEMERCS_IOW28:
390 	case USB_DEVICE_ID_CODEMERCS_IOW28L:
391 	case USB_DEVICE_ID_CODEMERCS_IOW100:
392 		/* The IOW56 uses asynchronous IO and more urbs */
393 		if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
394 			/* Wait until we are below the limit for submitted urbs */
395 			if (file->f_flags & O_NONBLOCK) {
396 				retval = -EAGAIN;
397 				goto exit;
398 			} else {
399 				retval = wait_event_interruptible(dev->write_wait,
400 								  (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
401 				if (retval) {
402 					/* we were interrupted by a signal */
403 					retval = -ERESTART;
404 					goto exit;
405 				}
406 				if (!dev->present) {
407 					/* The device was unplugged */
408 					retval = -ENODEV;
409 					goto exit;
410 				}
411 				if (!dev->opened) {
412 					/* We were closed while waiting for an URB */
413 					retval = -ENODEV;
414 					goto exit;
415 				}
416 			}
417 		}
418 		atomic_inc(&dev->write_busy);
419 		int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
420 		if (!int_out_urb) {
421 			retval = -ENOMEM;
422 			goto error_no_urb;
423 		}
424 		buf = usb_alloc_coherent(dev->udev, dev->report_size,
425 					 GFP_KERNEL, &int_out_urb->transfer_dma);
426 		if (!buf) {
427 			retval = -ENOMEM;
428 			dev_dbg(&dev->interface->dev,
429 				"Unable to allocate buffer\n");
430 			goto error_no_buffer;
431 		}
432 		usb_fill_int_urb(int_out_urb, dev->udev,
433 				 usb_sndintpipe(dev->udev,
434 						dev->int_out_endpoint->bEndpointAddress),
435 				 buf, dev->report_size,
436 				 iowarrior_write_callback, dev,
437 				 dev->int_out_endpoint->bInterval);
438 		int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
439 		if (copy_from_user(buf, user_buffer, count)) {
440 			retval = -EFAULT;
441 			goto error;
442 		}
443 		usb_anchor_urb(int_out_urb, &dev->submitted);
444 		retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
445 		if (retval) {
446 			dev_dbg(&dev->interface->dev,
447 				"submit error %d for urb nr.%d\n",
448 				retval, atomic_read(&dev->write_busy));
449 			usb_unanchor_urb(int_out_urb);
450 			goto error;
451 		}
452 		/* submit was ok */
453 		retval = count;
454 		usb_free_urb(int_out_urb);
455 		goto exit;
456 	default:
457 		/* what do we have here ? An unsupported Product-ID ? */
458 		dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
459 			__func__, dev->product_id);
460 		retval = -EFAULT;
461 		goto exit;
462 	}
463 error:
464 	usb_free_coherent(dev->udev, dev->report_size, buf,
465 			  int_out_urb->transfer_dma);
466 error_no_buffer:
467 	usb_free_urb(int_out_urb);
468 error_no_urb:
469 	atomic_dec(&dev->write_busy);
470 	wake_up_interruptible(&dev->write_wait);
471 exit:
472 	mutex_unlock(&dev->mutex);
473 	return retval;
474 }
475 
476 /*
477  *	iowarrior_ioctl
478  */
479 static long iowarrior_ioctl(struct file *file, unsigned int cmd,
480 							unsigned long arg)
481 {
482 	struct iowarrior *dev = NULL;
483 	__u8 *buffer;
484 	__u8 __user *user_buffer;
485 	int retval;
486 	int io_res;		/* checks for bytes read/written and copy_to/from_user results */
487 
488 	dev = file->private_data;
489 	if (!dev)
490 		return -ENODEV;
491 
492 	buffer = kzalloc(dev->report_size, GFP_KERNEL);
493 	if (!buffer)
494 		return -ENOMEM;
495 
496 	mutex_lock(&dev->mutex);
497 
498 	/* verify that the device wasn't unplugged */
499 	if (!dev->present) {
500 		retval = -ENODEV;
501 		goto error_out;
502 	}
503 
504 	dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
505 		dev->minor, cmd, arg);
506 
507 	retval = 0;
508 	io_res = 0;
509 	switch (cmd) {
510 	case IOW_WRITE:
511 		if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
512 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24SAG ||
513 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
514 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
515 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
516 			user_buffer = (__u8 __user *)arg;
517 			io_res = copy_from_user(buffer, user_buffer,
518 						dev->report_size);
519 			if (io_res) {
520 				retval = -EFAULT;
521 			} else {
522 				io_res = usb_set_report(dev->interface, 2, 0,
523 							buffer,
524 							dev->report_size);
525 				if (io_res < 0)
526 					retval = io_res;
527 			}
528 		} else {
529 			retval = -EINVAL;
530 			dev_err(&dev->interface->dev,
531 				"ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
532 				dev->product_id);
533 		}
534 		break;
535 	case IOW_READ:
536 		user_buffer = (__u8 __user *)arg;
537 		io_res = usb_get_report(dev->udev,
538 					dev->interface->cur_altsetting, 1, 0,
539 					buffer, dev->report_size);
540 		if (io_res < 0)
541 			retval = io_res;
542 		else {
543 			io_res = copy_to_user(user_buffer, buffer, dev->report_size);
544 			if (io_res)
545 				retval = -EFAULT;
546 		}
547 		break;
548 	case IOW_GETINFO:
549 		{
550 			/* Report available information for the device */
551 			struct iowarrior_info info;
552 			/* needed for power consumption */
553 			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
554 
555 			memset(&info, 0, sizeof(info));
556 			/* directly from the descriptor */
557 			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
558 			info.product = dev->product_id;
559 			info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
560 
561 			/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
562 			info.speed = dev->udev->speed;
563 			info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
564 			info.report_size = dev->report_size;
565 
566 			/* serial number string has been read earlier 8 chars or empty string */
567 			memcpy(info.serial, dev->chip_serial,
568 			       sizeof(dev->chip_serial));
569 			if (cfg_descriptor == NULL) {
570 				info.power = -1;	/* no information available */
571 			} else {
572 				/* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
573 				info.power = cfg_descriptor->bMaxPower * 2;
574 			}
575 			io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
576 					 sizeof(struct iowarrior_info));
577 			if (io_res)
578 				retval = -EFAULT;
579 			break;
580 		}
581 	default:
582 		/* return that we did not understand this ioctl call */
583 		retval = -ENOTTY;
584 		break;
585 	}
586 error_out:
587 	/* unlock the device */
588 	mutex_unlock(&dev->mutex);
589 	kfree(buffer);
590 	return retval;
591 }
592 
593 /*
594  *	iowarrior_open
595  */
596 static int iowarrior_open(struct inode *inode, struct file *file)
597 {
598 	struct iowarrior *dev = NULL;
599 	struct usb_interface *interface;
600 	int subminor;
601 	int retval = 0;
602 
603 	subminor = iminor(inode);
604 
605 	interface = usb_find_interface(&iowarrior_driver, subminor);
606 	if (!interface) {
607 		pr_err("%s - error, can't find device for minor %d\n",
608 		       __func__, subminor);
609 		return -ENODEV;
610 	}
611 
612 	dev = usb_get_intfdata(interface);
613 	if (!dev)
614 		return -ENODEV;
615 
616 	mutex_lock(&dev->mutex);
617 
618 	/* Only one process can open each device, no sharing. */
619 	if (dev->opened) {
620 		retval = -EBUSY;
621 		goto out;
622 	}
623 
624 	/* setup interrupt handler for receiving values */
625 	if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
626 		dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
627 		retval = -EFAULT;
628 		goto out;
629 	}
630 	/* increment our usage count for the driver */
631 	++dev->opened;
632 	/* save our object in the file's private structure */
633 	file->private_data = dev;
634 	retval = 0;
635 
636 out:
637 	mutex_unlock(&dev->mutex);
638 	return retval;
639 }
640 
641 /*
642  *	iowarrior_release
643  */
644 static int iowarrior_release(struct inode *inode, struct file *file)
645 {
646 	struct iowarrior *dev;
647 	int retval = 0;
648 
649 	dev = file->private_data;
650 	if (!dev)
651 		return -ENODEV;
652 
653 	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
654 
655 	/* lock our device */
656 	mutex_lock(&dev->mutex);
657 
658 	if (dev->opened <= 0) {
659 		retval = -ENODEV;	/* close called more than once */
660 		mutex_unlock(&dev->mutex);
661 	} else {
662 		dev->opened = 0;	/* we're closing now */
663 		retval = 0;
664 		if (dev->present) {
665 			/*
666 			   The device is still connected so we only shutdown
667 			   pending read-/write-ops.
668 			 */
669 			usb_kill_urb(dev->int_in_urb);
670 			wake_up_interruptible(&dev->read_wait);
671 			wake_up_interruptible(&dev->write_wait);
672 			mutex_unlock(&dev->mutex);
673 		} else {
674 			/* The device was unplugged, cleanup resources */
675 			mutex_unlock(&dev->mutex);
676 			iowarrior_delete(dev);
677 		}
678 	}
679 	return retval;
680 }
681 
682 static __poll_t iowarrior_poll(struct file *file, poll_table * wait)
683 {
684 	struct iowarrior *dev = file->private_data;
685 	__poll_t mask = 0;
686 
687 	if (!dev->present)
688 		return EPOLLERR | EPOLLHUP;
689 
690 	poll_wait(file, &dev->read_wait, wait);
691 	poll_wait(file, &dev->write_wait, wait);
692 
693 	if (!dev->present)
694 		return EPOLLERR | EPOLLHUP;
695 
696 	if (read_index(dev) != -1)
697 		mask |= EPOLLIN | EPOLLRDNORM;
698 
699 	if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
700 		mask |= EPOLLOUT | EPOLLWRNORM;
701 	return mask;
702 }
703 
704 /*
705  * File operations needed when we register this driver.
706  * This assumes that this driver NEEDS file operations,
707  * of course, which means that the driver is expected
708  * to have a node in the /dev directory. If the USB
709  * device were for a network interface then the driver
710  * would use "struct net_driver" instead, and a serial
711  * device would use "struct tty_driver".
712  */
713 static const struct file_operations iowarrior_fops = {
714 	.owner = THIS_MODULE,
715 	.write = iowarrior_write,
716 	.read = iowarrior_read,
717 	.unlocked_ioctl = iowarrior_ioctl,
718 	.open = iowarrior_open,
719 	.release = iowarrior_release,
720 	.poll = iowarrior_poll,
721 	.llseek = noop_llseek,
722 };
723 
724 static char *iowarrior_devnode(struct device *dev, umode_t *mode)
725 {
726 	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
727 }
728 
729 /*
730  * usb class driver info in order to get a minor number from the usb core,
731  * and to have the device registered with devfs and the driver core
732  */
733 static struct usb_class_driver iowarrior_class = {
734 	.name = "iowarrior%d",
735 	.devnode = iowarrior_devnode,
736 	.fops = &iowarrior_fops,
737 	.minor_base = IOWARRIOR_MINOR_BASE,
738 };
739 
740 /*---------------------------------*/
741 /*  probe and disconnect functions */
742 /*---------------------------------*/
743 /*
744  *	iowarrior_probe
745  *
746  *	Called by the usb core when a new device is connected that it thinks
747  *	this driver might be interested in.
748  */
749 static int iowarrior_probe(struct usb_interface *interface,
750 			   const struct usb_device_id *id)
751 {
752 	struct usb_device *udev = interface_to_usbdev(interface);
753 	struct iowarrior *dev = NULL;
754 	struct usb_host_interface *iface_desc;
755 	int retval = -ENOMEM;
756 	int res;
757 
758 	/* allocate memory for our device state and initialize it */
759 	dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
760 	if (!dev)
761 		return retval;
762 
763 	mutex_init(&dev->mutex);
764 
765 	atomic_set(&dev->intr_idx, 0);
766 	atomic_set(&dev->read_idx, 0);
767 	atomic_set(&dev->overflow_flag, 0);
768 	init_waitqueue_head(&dev->read_wait);
769 	atomic_set(&dev->write_busy, 0);
770 	init_waitqueue_head(&dev->write_wait);
771 
772 	dev->udev = udev;
773 	dev->interface = usb_get_intf(interface);
774 
775 	iface_desc = interface->cur_altsetting;
776 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
777 
778 	init_usb_anchor(&dev->submitted);
779 
780 	res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
781 	if (res) {
782 		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
783 		retval = res;
784 		goto error;
785 	}
786 
787 	if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
788 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
789 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
790 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L) ||
791 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW100)) {
792 		res = usb_find_last_int_out_endpoint(iface_desc,
793 				&dev->int_out_endpoint);
794 		if (res) {
795 			dev_err(&interface->dev, "no interrupt-out endpoint found\n");
796 			retval = res;
797 			goto error;
798 		}
799 	}
800 
801 	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
802 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
803 
804 	/*
805 	 * Some devices need the report size to be different than the
806 	 * endpoint size.
807 	 */
808 	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
809 		switch (dev->product_id) {
810 		case USB_DEVICE_ID_CODEMERCS_IOW56:
811 		case USB_DEVICE_ID_CODEMERCS_IOW56AM:
812 			dev->report_size = 7;
813 			break;
814 
815 		case USB_DEVICE_ID_CODEMERCS_IOW28:
816 		case USB_DEVICE_ID_CODEMERCS_IOW28L:
817 			dev->report_size = 4;
818 			break;
819 
820 		case USB_DEVICE_ID_CODEMERCS_IOW100:
821 			dev->report_size = 13;
822 			break;
823 		}
824 	}
825 
826 	/* create the urb and buffer for reading */
827 	dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
828 	if (!dev->int_in_urb)
829 		goto error;
830 	dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
831 	if (!dev->int_in_buffer)
832 		goto error;
833 	usb_fill_int_urb(dev->int_in_urb, dev->udev,
834 			 usb_rcvintpipe(dev->udev,
835 					dev->int_in_endpoint->bEndpointAddress),
836 			 dev->int_in_buffer, dev->report_size,
837 			 iowarrior_callback, dev,
838 			 dev->int_in_endpoint->bInterval);
839 	/* create an internal buffer for interrupt data from the device */
840 	dev->read_queue =
841 	    kmalloc_array(dev->report_size + 1, MAX_INTERRUPT_BUFFER,
842 			  GFP_KERNEL);
843 	if (!dev->read_queue)
844 		goto error;
845 	/* Get the serial-number of the chip */
846 	memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
847 	usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
848 		   sizeof(dev->chip_serial));
849 	if (strlen(dev->chip_serial) != 8)
850 		memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
851 
852 	/* Set the idle timeout to 0, if this is interface 0 */
853 	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
854 	    usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
855 			    0x0A,
856 			    USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
857 			    0, NULL, 0, USB_CTRL_SET_TIMEOUT);
858 	}
859 	/* allow device read and ioctl */
860 	dev->present = 1;
861 
862 	/* we can register the device now, as it is ready */
863 	usb_set_intfdata(interface, dev);
864 
865 	retval = usb_register_dev(interface, &iowarrior_class);
866 	if (retval) {
867 		/* something prevented us from registering this driver */
868 		dev_err(&interface->dev, "Not able to get a minor for this device.\n");
869 		goto error;
870 	}
871 
872 	dev->minor = interface->minor;
873 
874 	/* let the user know what node this device is now attached to */
875 	dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
876 		 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
877 		 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
878 	return retval;
879 
880 error:
881 	iowarrior_delete(dev);
882 	return retval;
883 }
884 
885 /*
886  *	iowarrior_disconnect
887  *
888  *	Called by the usb core when the device is removed from the system.
889  */
890 static void iowarrior_disconnect(struct usb_interface *interface)
891 {
892 	struct iowarrior *dev = usb_get_intfdata(interface);
893 	int minor = dev->minor;
894 
895 	usb_deregister_dev(interface, &iowarrior_class);
896 
897 	mutex_lock(&dev->mutex);
898 
899 	/* prevent device read, write and ioctl */
900 	dev->present = 0;
901 
902 	if (dev->opened) {
903 		/* There is a process that holds a filedescriptor to the device ,
904 		   so we only shutdown read-/write-ops going on.
905 		   Deleting the device is postponed until close() was called.
906 		 */
907 		usb_kill_urb(dev->int_in_urb);
908 		usb_kill_anchored_urbs(&dev->submitted);
909 		wake_up_interruptible(&dev->read_wait);
910 		wake_up_interruptible(&dev->write_wait);
911 		mutex_unlock(&dev->mutex);
912 	} else {
913 		/* no process is using the device, cleanup now */
914 		mutex_unlock(&dev->mutex);
915 		iowarrior_delete(dev);
916 	}
917 
918 	dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
919 		 minor - IOWARRIOR_MINOR_BASE);
920 }
921 
922 /* usb specific object needed to register this driver with the usb subsystem */
923 static struct usb_driver iowarrior_driver = {
924 	.name = "iowarrior",
925 	.probe = iowarrior_probe,
926 	.disconnect = iowarrior_disconnect,
927 	.id_table = iowarrior_ids,
928 };
929 
930 module_usb_driver(iowarrior_driver);
931