xref: /openbmc/linux/drivers/usb/misc/iowarrior.c (revision 29c37341)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Native support for the I/O-Warrior USB devices
4  *
5  *  Copyright (c) 2003-2005, 2020  Code Mercenaries GmbH
6  *  written by Christian Lucht <lucht@codemercs.com> and
7  *  Christoph Jung <jung@codemercs.com>
8  *
9  *  based on
10 
11  *  usb-skeleton.c by Greg Kroah-Hartman  <greg@kroah.com>
12  *  brlvger.c by Stephane Dalton  <sdalton@videotron.ca>
13  *           and Stephane Doyon   <s.doyon@videotron.ca>
14  *
15  *  Released under the GPLv2.
16  */
17 
18 #include <linux/module.h>
19 #include <linux/usb.h>
20 #include <linux/slab.h>
21 #include <linux/sched.h>
22 #include <linux/mutex.h>
23 #include <linux/poll.h>
24 #include <linux/usb/iowarrior.h>
25 
26 #define DRIVER_AUTHOR "Christian Lucht <lucht@codemercs.com>"
27 #define DRIVER_DESC "USB IO-Warrior driver"
28 
29 #define USB_VENDOR_ID_CODEMERCS		1984
30 /* low speed iowarrior */
31 #define USB_DEVICE_ID_CODEMERCS_IOW40	0x1500
32 #define USB_DEVICE_ID_CODEMERCS_IOW24	0x1501
33 #define USB_DEVICE_ID_CODEMERCS_IOWPV1	0x1511
34 #define USB_DEVICE_ID_CODEMERCS_IOWPV2	0x1512
35 /* full speed iowarrior */
36 #define USB_DEVICE_ID_CODEMERCS_IOW56	0x1503
37 /* fuller speed iowarrior */
38 #define USB_DEVICE_ID_CODEMERCS_IOW28	0x1504
39 #define USB_DEVICE_ID_CODEMERCS_IOW28L	0x1505
40 #define USB_DEVICE_ID_CODEMERCS_IOW100	0x1506
41 
42 /* OEMed devices */
43 #define USB_DEVICE_ID_CODEMERCS_IOW24SAG	0x158a
44 #define USB_DEVICE_ID_CODEMERCS_IOW56AM		0x158b
45 
46 /* Get a minor range for your devices from the usb maintainer */
47 #ifdef CONFIG_USB_DYNAMIC_MINORS
48 #define IOWARRIOR_MINOR_BASE	0
49 #else
50 #define IOWARRIOR_MINOR_BASE	208	// SKELETON_MINOR_BASE 192 + 16, not official yet
51 #endif
52 
53 /* interrupt input queue size */
54 #define MAX_INTERRUPT_BUFFER 16
55 /*
56    maximum number of urbs that are submitted for writes at the same time,
57    this applies to the IOWarrior56 only!
58    IOWarrior24 and IOWarrior40 use synchronous usb_control_msg calls.
59 */
60 #define MAX_WRITES_IN_FLIGHT 4
61 
62 MODULE_AUTHOR(DRIVER_AUTHOR);
63 MODULE_DESCRIPTION(DRIVER_DESC);
64 MODULE_LICENSE("GPL");
65 
66 static struct usb_driver iowarrior_driver;
67 
68 /*--------------*/
69 /*     data     */
70 /*--------------*/
71 
72 /* Structure to hold all of our device specific stuff */
73 struct iowarrior {
74 	struct mutex mutex;			/* locks this structure */
75 	struct usb_device *udev;		/* save off the usb device pointer */
76 	struct usb_interface *interface;	/* the interface for this device */
77 	unsigned char minor;			/* the starting minor number for this device */
78 	struct usb_endpoint_descriptor *int_out_endpoint;	/* endpoint for reading (needed for IOW56 only) */
79 	struct usb_endpoint_descriptor *int_in_endpoint;	/* endpoint for reading */
80 	struct urb *int_in_urb;		/* the urb for reading data */
81 	unsigned char *int_in_buffer;	/* buffer for data to be read */
82 	unsigned char serial_number;	/* to detect lost packages */
83 	unsigned char *read_queue;	/* size is MAX_INTERRUPT_BUFFER * packet size */
84 	wait_queue_head_t read_wait;
85 	wait_queue_head_t write_wait;	/* wait-queue for writing to the device */
86 	atomic_t write_busy;		/* number of write-urbs submitted */
87 	atomic_t read_idx;
88 	atomic_t intr_idx;
89 	atomic_t overflow_flag;		/* signals an index 'rollover' */
90 	int present;			/* this is 1 as long as the device is connected */
91 	int opened;			/* this is 1 if the device is currently open */
92 	char chip_serial[9];		/* the serial number string of the chip connected */
93 	int report_size;		/* number of bytes in a report */
94 	u16 product_id;
95 	struct usb_anchor submitted;
96 };
97 
98 /*--------------*/
99 /*    globals   */
100 /*--------------*/
101 
102 /*
103  *  USB spec identifies 5 second timeouts.
104  */
105 #define GET_TIMEOUT 5
106 #define USB_REQ_GET_REPORT  0x01
107 //#if 0
108 static int usb_get_report(struct usb_device *dev,
109 			  struct usb_host_interface *inter, unsigned char type,
110 			  unsigned char id, void *buf, int size)
111 {
112 	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
113 			       USB_REQ_GET_REPORT,
114 			       USB_DIR_IN | USB_TYPE_CLASS |
115 			       USB_RECIP_INTERFACE, (type << 8) + id,
116 			       inter->desc.bInterfaceNumber, buf, size,
117 			       GET_TIMEOUT*HZ);
118 }
119 //#endif
120 
121 #define USB_REQ_SET_REPORT 0x09
122 
123 static int usb_set_report(struct usb_interface *intf, unsigned char type,
124 			  unsigned char id, void *buf, int size)
125 {
126 	return usb_control_msg(interface_to_usbdev(intf),
127 			       usb_sndctrlpipe(interface_to_usbdev(intf), 0),
128 			       USB_REQ_SET_REPORT,
129 			       USB_TYPE_CLASS | USB_RECIP_INTERFACE,
130 			       (type << 8) + id,
131 			       intf->cur_altsetting->desc.bInterfaceNumber, buf,
132 			       size, HZ);
133 }
134 
135 /*---------------------*/
136 /* driver registration */
137 /*---------------------*/
138 /* table of devices that work with this driver */
139 static const struct usb_device_id iowarrior_ids[] = {
140 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40)},
141 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24)},
142 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
143 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
144 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
145 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
146 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
147 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
148 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
149 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW100)},
150 	{}			/* Terminating entry */
151 };
152 MODULE_DEVICE_TABLE(usb, iowarrior_ids);
153 
154 /*
155  * USB callback handler for reading data
156  */
157 static void iowarrior_callback(struct urb *urb)
158 {
159 	struct iowarrior *dev = urb->context;
160 	int intr_idx;
161 	int read_idx;
162 	int aux_idx;
163 	int offset;
164 	int status = urb->status;
165 	int retval;
166 
167 	switch (status) {
168 	case 0:
169 		/* success */
170 		break;
171 	case -ECONNRESET:
172 	case -ENOENT:
173 	case -ESHUTDOWN:
174 		return;
175 	default:
176 		goto exit;
177 	}
178 
179 	intr_idx = atomic_read(&dev->intr_idx);
180 	/* aux_idx become previous intr_idx */
181 	aux_idx = (intr_idx == 0) ? (MAX_INTERRUPT_BUFFER - 1) : (intr_idx - 1);
182 	read_idx = atomic_read(&dev->read_idx);
183 
184 	/* queue is not empty and it's interface 0 */
185 	if ((intr_idx != read_idx)
186 	    && (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0)) {
187 		/* + 1 for serial number */
188 		offset = aux_idx * (dev->report_size + 1);
189 		if (!memcmp
190 		    (dev->read_queue + offset, urb->transfer_buffer,
191 		     dev->report_size)) {
192 			/* equal values on interface 0 will be ignored */
193 			goto exit;
194 		}
195 	}
196 
197 	/* aux_idx become next intr_idx */
198 	aux_idx = (intr_idx == (MAX_INTERRUPT_BUFFER - 1)) ? 0 : (intr_idx + 1);
199 	if (read_idx == aux_idx) {
200 		/* queue full, dropping oldest input */
201 		read_idx = (++read_idx == MAX_INTERRUPT_BUFFER) ? 0 : read_idx;
202 		atomic_set(&dev->read_idx, read_idx);
203 		atomic_set(&dev->overflow_flag, 1);
204 	}
205 
206 	/* +1 for serial number */
207 	offset = intr_idx * (dev->report_size + 1);
208 	memcpy(dev->read_queue + offset, urb->transfer_buffer,
209 	       dev->report_size);
210 	*(dev->read_queue + offset + (dev->report_size)) = dev->serial_number++;
211 
212 	atomic_set(&dev->intr_idx, aux_idx);
213 	/* tell the blocking read about the new data */
214 	wake_up_interruptible(&dev->read_wait);
215 
216 exit:
217 	retval = usb_submit_urb(urb, GFP_ATOMIC);
218 	if (retval)
219 		dev_err(&dev->interface->dev, "%s - usb_submit_urb failed with result %d\n",
220 			__func__, retval);
221 
222 }
223 
224 /*
225  * USB Callback handler for write-ops
226  */
227 static void iowarrior_write_callback(struct urb *urb)
228 {
229 	struct iowarrior *dev;
230 	int status = urb->status;
231 
232 	dev = urb->context;
233 	/* sync/async unlink faults aren't errors */
234 	if (status &&
235 	    !(status == -ENOENT ||
236 	      status == -ECONNRESET || status == -ESHUTDOWN)) {
237 		dev_dbg(&dev->interface->dev,
238 			"nonzero write bulk status received: %d\n", status);
239 	}
240 	/* free up our allocated buffer */
241 	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
242 			  urb->transfer_buffer, urb->transfer_dma);
243 	/* tell a waiting writer the interrupt-out-pipe is available again */
244 	atomic_dec(&dev->write_busy);
245 	wake_up_interruptible(&dev->write_wait);
246 }
247 
248 /*
249  *	iowarrior_delete
250  */
251 static inline void iowarrior_delete(struct iowarrior *dev)
252 {
253 	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
254 	kfree(dev->int_in_buffer);
255 	usb_free_urb(dev->int_in_urb);
256 	kfree(dev->read_queue);
257 	usb_put_intf(dev->interface);
258 	kfree(dev);
259 }
260 
261 /*---------------------*/
262 /* fops implementation */
263 /*---------------------*/
264 
265 static int read_index(struct iowarrior *dev)
266 {
267 	int intr_idx, read_idx;
268 
269 	read_idx = atomic_read(&dev->read_idx);
270 	intr_idx = atomic_read(&dev->intr_idx);
271 
272 	return (read_idx == intr_idx ? -1 : read_idx);
273 }
274 
275 /*
276  *  iowarrior_read
277  */
278 static ssize_t iowarrior_read(struct file *file, char __user *buffer,
279 			      size_t count, loff_t *ppos)
280 {
281 	struct iowarrior *dev;
282 	int read_idx;
283 	int offset;
284 
285 	dev = file->private_data;
286 
287 	/* verify that the device wasn't unplugged */
288 	if (!dev || !dev->present)
289 		return -ENODEV;
290 
291 	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
292 		dev->minor, count);
293 
294 	/* read count must be packet size (+ time stamp) */
295 	if ((count != dev->report_size)
296 	    && (count != (dev->report_size + 1)))
297 		return -EINVAL;
298 
299 	/* repeat until no buffer overrun in callback handler occur */
300 	do {
301 		atomic_set(&dev->overflow_flag, 0);
302 		if ((read_idx = read_index(dev)) == -1) {
303 			/* queue empty */
304 			if (file->f_flags & O_NONBLOCK)
305 				return -EAGAIN;
306 			else {
307 				//next line will return when there is either new data, or the device is unplugged
308 				int r = wait_event_interruptible(dev->read_wait,
309 								 (!dev->present
310 								  || (read_idx =
311 								      read_index
312 								      (dev)) !=
313 								  -1));
314 				if (r) {
315 					//we were interrupted by a signal
316 					return -ERESTART;
317 				}
318 				if (!dev->present) {
319 					//The device was unplugged
320 					return -ENODEV;
321 				}
322 				if (read_idx == -1) {
323 					// Can this happen ???
324 					return 0;
325 				}
326 			}
327 		}
328 
329 		offset = read_idx * (dev->report_size + 1);
330 		if (copy_to_user(buffer, dev->read_queue + offset, count)) {
331 			return -EFAULT;
332 		}
333 	} while (atomic_read(&dev->overflow_flag));
334 
335 	read_idx = ++read_idx == MAX_INTERRUPT_BUFFER ? 0 : read_idx;
336 	atomic_set(&dev->read_idx, read_idx);
337 	return count;
338 }
339 
340 /*
341  * iowarrior_write
342  */
343 static ssize_t iowarrior_write(struct file *file,
344 			       const char __user *user_buffer,
345 			       size_t count, loff_t *ppos)
346 {
347 	struct iowarrior *dev;
348 	int retval = 0;
349 	char *buf = NULL;	/* for IOW24 and IOW56 we need a buffer */
350 	struct urb *int_out_urb = NULL;
351 
352 	dev = file->private_data;
353 
354 	mutex_lock(&dev->mutex);
355 	/* verify that the device wasn't unplugged */
356 	if (!dev->present) {
357 		retval = -ENODEV;
358 		goto exit;
359 	}
360 	dev_dbg(&dev->interface->dev, "minor %d, count = %zd\n",
361 		dev->minor, count);
362 	/* if count is 0 we're already done */
363 	if (count == 0) {
364 		retval = 0;
365 		goto exit;
366 	}
367 	/* We only accept full reports */
368 	if (count != dev->report_size) {
369 		retval = -EINVAL;
370 		goto exit;
371 	}
372 	switch (dev->product_id) {
373 	case USB_DEVICE_ID_CODEMERCS_IOW24:
374 	case USB_DEVICE_ID_CODEMERCS_IOW24SAG:
375 	case USB_DEVICE_ID_CODEMERCS_IOWPV1:
376 	case USB_DEVICE_ID_CODEMERCS_IOWPV2:
377 	case USB_DEVICE_ID_CODEMERCS_IOW40:
378 		/* IOW24 and IOW40 use a synchronous call */
379 		buf = memdup_user(user_buffer, count);
380 		if (IS_ERR(buf)) {
381 			retval = PTR_ERR(buf);
382 			goto exit;
383 		}
384 		retval = usb_set_report(dev->interface, 2, 0, buf, count);
385 		kfree(buf);
386 		goto exit;
387 		break;
388 	case USB_DEVICE_ID_CODEMERCS_IOW56:
389 	case USB_DEVICE_ID_CODEMERCS_IOW56AM:
390 	case USB_DEVICE_ID_CODEMERCS_IOW28:
391 	case USB_DEVICE_ID_CODEMERCS_IOW28L:
392 	case USB_DEVICE_ID_CODEMERCS_IOW100:
393 		/* The IOW56 uses asynchronous IO and more urbs */
394 		if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
395 			/* Wait until we are below the limit for submitted urbs */
396 			if (file->f_flags & O_NONBLOCK) {
397 				retval = -EAGAIN;
398 				goto exit;
399 			} else {
400 				retval = wait_event_interruptible(dev->write_wait,
401 								  (!dev->present || (atomic_read (&dev-> write_busy) < MAX_WRITES_IN_FLIGHT)));
402 				if (retval) {
403 					/* we were interrupted by a signal */
404 					retval = -ERESTART;
405 					goto exit;
406 				}
407 				if (!dev->present) {
408 					/* The device was unplugged */
409 					retval = -ENODEV;
410 					goto exit;
411 				}
412 				if (!dev->opened) {
413 					/* We were closed while waiting for an URB */
414 					retval = -ENODEV;
415 					goto exit;
416 				}
417 			}
418 		}
419 		atomic_inc(&dev->write_busy);
420 		int_out_urb = usb_alloc_urb(0, GFP_KERNEL);
421 		if (!int_out_urb) {
422 			retval = -ENOMEM;
423 			goto error_no_urb;
424 		}
425 		buf = usb_alloc_coherent(dev->udev, dev->report_size,
426 					 GFP_KERNEL, &int_out_urb->transfer_dma);
427 		if (!buf) {
428 			retval = -ENOMEM;
429 			dev_dbg(&dev->interface->dev,
430 				"Unable to allocate buffer\n");
431 			goto error_no_buffer;
432 		}
433 		usb_fill_int_urb(int_out_urb, dev->udev,
434 				 usb_sndintpipe(dev->udev,
435 						dev->int_out_endpoint->bEndpointAddress),
436 				 buf, dev->report_size,
437 				 iowarrior_write_callback, dev,
438 				 dev->int_out_endpoint->bInterval);
439 		int_out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
440 		if (copy_from_user(buf, user_buffer, count)) {
441 			retval = -EFAULT;
442 			goto error;
443 		}
444 		usb_anchor_urb(int_out_urb, &dev->submitted);
445 		retval = usb_submit_urb(int_out_urb, GFP_KERNEL);
446 		if (retval) {
447 			dev_dbg(&dev->interface->dev,
448 				"submit error %d for urb nr.%d\n",
449 				retval, atomic_read(&dev->write_busy));
450 			usb_unanchor_urb(int_out_urb);
451 			goto error;
452 		}
453 		/* submit was ok */
454 		retval = count;
455 		usb_free_urb(int_out_urb);
456 		goto exit;
457 		break;
458 	default:
459 		/* what do we have here ? An unsupported Product-ID ? */
460 		dev_err(&dev->interface->dev, "%s - not supported for product=0x%x\n",
461 			__func__, dev->product_id);
462 		retval = -EFAULT;
463 		goto exit;
464 		break;
465 	}
466 error:
467 	usb_free_coherent(dev->udev, dev->report_size, buf,
468 			  int_out_urb->transfer_dma);
469 error_no_buffer:
470 	usb_free_urb(int_out_urb);
471 error_no_urb:
472 	atomic_dec(&dev->write_busy);
473 	wake_up_interruptible(&dev->write_wait);
474 exit:
475 	mutex_unlock(&dev->mutex);
476 	return retval;
477 }
478 
479 /*
480  *	iowarrior_ioctl
481  */
482 static long iowarrior_ioctl(struct file *file, unsigned int cmd,
483 							unsigned long arg)
484 {
485 	struct iowarrior *dev = NULL;
486 	__u8 *buffer;
487 	__u8 __user *user_buffer;
488 	int retval;
489 	int io_res;		/* checks for bytes read/written and copy_to/from_user results */
490 
491 	dev = file->private_data;
492 	if (!dev)
493 		return -ENODEV;
494 
495 	buffer = kzalloc(dev->report_size, GFP_KERNEL);
496 	if (!buffer)
497 		return -ENOMEM;
498 
499 	mutex_lock(&dev->mutex);
500 
501 	/* verify that the device wasn't unplugged */
502 	if (!dev->present) {
503 		retval = -ENODEV;
504 		goto error_out;
505 	}
506 
507 	dev_dbg(&dev->interface->dev, "minor %d, cmd 0x%.4x, arg %ld\n",
508 		dev->minor, cmd, arg);
509 
510 	retval = 0;
511 	io_res = 0;
512 	switch (cmd) {
513 	case IOW_WRITE:
514 		if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
515 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24SAG ||
516 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
517 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
518 		    dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
519 			user_buffer = (__u8 __user *)arg;
520 			io_res = copy_from_user(buffer, user_buffer,
521 						dev->report_size);
522 			if (io_res) {
523 				retval = -EFAULT;
524 			} else {
525 				io_res = usb_set_report(dev->interface, 2, 0,
526 							buffer,
527 							dev->report_size);
528 				if (io_res < 0)
529 					retval = io_res;
530 			}
531 		} else {
532 			retval = -EINVAL;
533 			dev_err(&dev->interface->dev,
534 				"ioctl 'IOW_WRITE' is not supported for product=0x%x.\n",
535 				dev->product_id);
536 		}
537 		break;
538 	case IOW_READ:
539 		user_buffer = (__u8 __user *)arg;
540 		io_res = usb_get_report(dev->udev,
541 					dev->interface->cur_altsetting, 1, 0,
542 					buffer, dev->report_size);
543 		if (io_res < 0)
544 			retval = io_res;
545 		else {
546 			io_res = copy_to_user(user_buffer, buffer, dev->report_size);
547 			if (io_res)
548 				retval = -EFAULT;
549 		}
550 		break;
551 	case IOW_GETINFO:
552 		{
553 			/* Report available information for the device */
554 			struct iowarrior_info info;
555 			/* needed for power consumption */
556 			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
557 
558 			memset(&info, 0, sizeof(info));
559 			/* directly from the descriptor */
560 			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
561 			info.product = dev->product_id;
562 			info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
563 
564 			/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
565 			info.speed = dev->udev->speed;
566 			info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
567 			info.report_size = dev->report_size;
568 
569 			/* serial number string has been read earlier 8 chars or empty string */
570 			memcpy(info.serial, dev->chip_serial,
571 			       sizeof(dev->chip_serial));
572 			if (cfg_descriptor == NULL) {
573 				info.power = -1;	/* no information available */
574 			} else {
575 				/* the MaxPower is stored in units of 2mA to make it fit into a byte-value */
576 				info.power = cfg_descriptor->bMaxPower * 2;
577 			}
578 			io_res = copy_to_user((struct iowarrior_info __user *)arg, &info,
579 					 sizeof(struct iowarrior_info));
580 			if (io_res)
581 				retval = -EFAULT;
582 			break;
583 		}
584 	default:
585 		/* return that we did not understand this ioctl call */
586 		retval = -ENOTTY;
587 		break;
588 	}
589 error_out:
590 	/* unlock the device */
591 	mutex_unlock(&dev->mutex);
592 	kfree(buffer);
593 	return retval;
594 }
595 
596 /*
597  *	iowarrior_open
598  */
599 static int iowarrior_open(struct inode *inode, struct file *file)
600 {
601 	struct iowarrior *dev = NULL;
602 	struct usb_interface *interface;
603 	int subminor;
604 	int retval = 0;
605 
606 	subminor = iminor(inode);
607 
608 	interface = usb_find_interface(&iowarrior_driver, subminor);
609 	if (!interface) {
610 		pr_err("%s - error, can't find device for minor %d\n",
611 		       __func__, subminor);
612 		return -ENODEV;
613 	}
614 
615 	dev = usb_get_intfdata(interface);
616 	if (!dev)
617 		return -ENODEV;
618 
619 	mutex_lock(&dev->mutex);
620 
621 	/* Only one process can open each device, no sharing. */
622 	if (dev->opened) {
623 		retval = -EBUSY;
624 		goto out;
625 	}
626 
627 	/* setup interrupt handler for receiving values */
628 	if ((retval = usb_submit_urb(dev->int_in_urb, GFP_KERNEL)) < 0) {
629 		dev_err(&interface->dev, "Error %d while submitting URB\n", retval);
630 		retval = -EFAULT;
631 		goto out;
632 	}
633 	/* increment our usage count for the driver */
634 	++dev->opened;
635 	/* save our object in the file's private structure */
636 	file->private_data = dev;
637 	retval = 0;
638 
639 out:
640 	mutex_unlock(&dev->mutex);
641 	return retval;
642 }
643 
644 /*
645  *	iowarrior_release
646  */
647 static int iowarrior_release(struct inode *inode, struct file *file)
648 {
649 	struct iowarrior *dev;
650 	int retval = 0;
651 
652 	dev = file->private_data;
653 	if (!dev)
654 		return -ENODEV;
655 
656 	dev_dbg(&dev->interface->dev, "minor %d\n", dev->minor);
657 
658 	/* lock our device */
659 	mutex_lock(&dev->mutex);
660 
661 	if (dev->opened <= 0) {
662 		retval = -ENODEV;	/* close called more than once */
663 		mutex_unlock(&dev->mutex);
664 	} else {
665 		dev->opened = 0;	/* we're closing now */
666 		retval = 0;
667 		if (dev->present) {
668 			/*
669 			   The device is still connected so we only shutdown
670 			   pending read-/write-ops.
671 			 */
672 			usb_kill_urb(dev->int_in_urb);
673 			wake_up_interruptible(&dev->read_wait);
674 			wake_up_interruptible(&dev->write_wait);
675 			mutex_unlock(&dev->mutex);
676 		} else {
677 			/* The device was unplugged, cleanup resources */
678 			mutex_unlock(&dev->mutex);
679 			iowarrior_delete(dev);
680 		}
681 	}
682 	return retval;
683 }
684 
685 static __poll_t iowarrior_poll(struct file *file, poll_table * wait)
686 {
687 	struct iowarrior *dev = file->private_data;
688 	__poll_t mask = 0;
689 
690 	if (!dev->present)
691 		return EPOLLERR | EPOLLHUP;
692 
693 	poll_wait(file, &dev->read_wait, wait);
694 	poll_wait(file, &dev->write_wait, wait);
695 
696 	if (!dev->present)
697 		return EPOLLERR | EPOLLHUP;
698 
699 	if (read_index(dev) != -1)
700 		mask |= EPOLLIN | EPOLLRDNORM;
701 
702 	if (atomic_read(&dev->write_busy) < MAX_WRITES_IN_FLIGHT)
703 		mask |= EPOLLOUT | EPOLLWRNORM;
704 	return mask;
705 }
706 
707 /*
708  * File operations needed when we register this driver.
709  * This assumes that this driver NEEDS file operations,
710  * of course, which means that the driver is expected
711  * to have a node in the /dev directory. If the USB
712  * device were for a network interface then the driver
713  * would use "struct net_driver" instead, and a serial
714  * device would use "struct tty_driver".
715  */
716 static const struct file_operations iowarrior_fops = {
717 	.owner = THIS_MODULE,
718 	.write = iowarrior_write,
719 	.read = iowarrior_read,
720 	.unlocked_ioctl = iowarrior_ioctl,
721 	.open = iowarrior_open,
722 	.release = iowarrior_release,
723 	.poll = iowarrior_poll,
724 	.llseek = noop_llseek,
725 };
726 
727 static char *iowarrior_devnode(struct device *dev, umode_t *mode)
728 {
729 	return kasprintf(GFP_KERNEL, "usb/%s", dev_name(dev));
730 }
731 
732 /*
733  * usb class driver info in order to get a minor number from the usb core,
734  * and to have the device registered with devfs and the driver core
735  */
736 static struct usb_class_driver iowarrior_class = {
737 	.name = "iowarrior%d",
738 	.devnode = iowarrior_devnode,
739 	.fops = &iowarrior_fops,
740 	.minor_base = IOWARRIOR_MINOR_BASE,
741 };
742 
743 /*---------------------------------*/
744 /*  probe and disconnect functions */
745 /*---------------------------------*/
746 /*
747  *	iowarrior_probe
748  *
749  *	Called by the usb core when a new device is connected that it thinks
750  *	this driver might be interested in.
751  */
752 static int iowarrior_probe(struct usb_interface *interface,
753 			   const struct usb_device_id *id)
754 {
755 	struct usb_device *udev = interface_to_usbdev(interface);
756 	struct iowarrior *dev = NULL;
757 	struct usb_host_interface *iface_desc;
758 	int retval = -ENOMEM;
759 	int res;
760 
761 	/* allocate memory for our device state and initialize it */
762 	dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
763 	if (!dev)
764 		return retval;
765 
766 	mutex_init(&dev->mutex);
767 
768 	atomic_set(&dev->intr_idx, 0);
769 	atomic_set(&dev->read_idx, 0);
770 	atomic_set(&dev->overflow_flag, 0);
771 	init_waitqueue_head(&dev->read_wait);
772 	atomic_set(&dev->write_busy, 0);
773 	init_waitqueue_head(&dev->write_wait);
774 
775 	dev->udev = udev;
776 	dev->interface = usb_get_intf(interface);
777 
778 	iface_desc = interface->cur_altsetting;
779 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
780 
781 	init_usb_anchor(&dev->submitted);
782 
783 	res = usb_find_last_int_in_endpoint(iface_desc, &dev->int_in_endpoint);
784 	if (res) {
785 		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
786 		retval = res;
787 		goto error;
788 	}
789 
790 	if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
791 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
792 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
793 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L) ||
794 	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW100)) {
795 		res = usb_find_last_int_out_endpoint(iface_desc,
796 				&dev->int_out_endpoint);
797 		if (res) {
798 			dev_err(&interface->dev, "no interrupt-out endpoint found\n");
799 			retval = res;
800 			goto error;
801 		}
802 	}
803 
804 	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
805 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
806 
807 	/*
808 	 * Some devices need the report size to be different than the
809 	 * endpoint size.
810 	 */
811 	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
812 		switch (dev->product_id) {
813 		case USB_DEVICE_ID_CODEMERCS_IOW56:
814 		case USB_DEVICE_ID_CODEMERCS_IOW56AM:
815 			dev->report_size = 7;
816 			break;
817 
818 		case USB_DEVICE_ID_CODEMERCS_IOW28:
819 		case USB_DEVICE_ID_CODEMERCS_IOW28L:
820 			dev->report_size = 4;
821 			break;
822 
823 		case USB_DEVICE_ID_CODEMERCS_IOW100:
824 			dev->report_size = 13;
825 			break;
826 		}
827 	}
828 
829 	/* create the urb and buffer for reading */
830 	dev->int_in_urb = usb_alloc_urb(0, GFP_KERNEL);
831 	if (!dev->int_in_urb)
832 		goto error;
833 	dev->int_in_buffer = kmalloc(dev->report_size, GFP_KERNEL);
834 	if (!dev->int_in_buffer)
835 		goto error;
836 	usb_fill_int_urb(dev->int_in_urb, dev->udev,
837 			 usb_rcvintpipe(dev->udev,
838 					dev->int_in_endpoint->bEndpointAddress),
839 			 dev->int_in_buffer, dev->report_size,
840 			 iowarrior_callback, dev,
841 			 dev->int_in_endpoint->bInterval);
842 	/* create an internal buffer for interrupt data from the device */
843 	dev->read_queue =
844 	    kmalloc_array(dev->report_size + 1, MAX_INTERRUPT_BUFFER,
845 			  GFP_KERNEL);
846 	if (!dev->read_queue)
847 		goto error;
848 	/* Get the serial-number of the chip */
849 	memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
850 	usb_string(udev, udev->descriptor.iSerialNumber, dev->chip_serial,
851 		   sizeof(dev->chip_serial));
852 	if (strlen(dev->chip_serial) != 8)
853 		memset(dev->chip_serial, 0x00, sizeof(dev->chip_serial));
854 
855 	/* Set the idle timeout to 0, if this is interface 0 */
856 	if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
857 	    usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
858 			    0x0A,
859 			    USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
860 			    0, NULL, 0, USB_CTRL_SET_TIMEOUT);
861 	}
862 	/* allow device read and ioctl */
863 	dev->present = 1;
864 
865 	/* we can register the device now, as it is ready */
866 	usb_set_intfdata(interface, dev);
867 
868 	retval = usb_register_dev(interface, &iowarrior_class);
869 	if (retval) {
870 		/* something prevented us from registering this driver */
871 		dev_err(&interface->dev, "Not able to get a minor for this device.\n");
872 		goto error;
873 	}
874 
875 	dev->minor = interface->minor;
876 
877 	/* let the user know what node this device is now attached to */
878 	dev_info(&interface->dev, "IOWarrior product=0x%x, serial=%s interface=%d "
879 		 "now attached to iowarrior%d\n", dev->product_id, dev->chip_serial,
880 		 iface_desc->desc.bInterfaceNumber, dev->minor - IOWARRIOR_MINOR_BASE);
881 	return retval;
882 
883 error:
884 	iowarrior_delete(dev);
885 	return retval;
886 }
887 
888 /*
889  *	iowarrior_disconnect
890  *
891  *	Called by the usb core when the device is removed from the system.
892  */
893 static void iowarrior_disconnect(struct usb_interface *interface)
894 {
895 	struct iowarrior *dev = usb_get_intfdata(interface);
896 	int minor = dev->minor;
897 
898 	usb_deregister_dev(interface, &iowarrior_class);
899 
900 	mutex_lock(&dev->mutex);
901 
902 	/* prevent device read, write and ioctl */
903 	dev->present = 0;
904 
905 	if (dev->opened) {
906 		/* There is a process that holds a filedescriptor to the device ,
907 		   so we only shutdown read-/write-ops going on.
908 		   Deleting the device is postponed until close() was called.
909 		 */
910 		usb_kill_urb(dev->int_in_urb);
911 		usb_kill_anchored_urbs(&dev->submitted);
912 		wake_up_interruptible(&dev->read_wait);
913 		wake_up_interruptible(&dev->write_wait);
914 		mutex_unlock(&dev->mutex);
915 	} else {
916 		/* no process is using the device, cleanup now */
917 		mutex_unlock(&dev->mutex);
918 		iowarrior_delete(dev);
919 	}
920 
921 	dev_info(&interface->dev, "I/O-Warror #%d now disconnected\n",
922 		 minor - IOWARRIOR_MINOR_BASE);
923 }
924 
925 /* usb specific object needed to register this driver with the usb subsystem */
926 static struct usb_driver iowarrior_driver = {
927 	.name = "iowarrior",
928 	.probe = iowarrior_probe,
929 	.disconnect = iowarrior_disconnect,
930 	.id_table = iowarrior_ids,
931 };
932 
933 module_usb_driver(iowarrior_driver);
934