1 /* 2 * Emagic EMI 2|6 usb audio interface firmware loader. 3 * Copyright (C) 2002 4 * Tapio Laxström (tapio.laxstrom@iptime.fi) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License, as published by 8 * the Free Software Foundation, version 2. 9 * 10 * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp 11 */ 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/slab.h> 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/usb.h> 18 #include <linux/delay.h> 19 #include <linux/firmware.h> 20 #include <linux/ihex.h> 21 22 #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ 23 #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ 24 #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ 25 26 #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ 27 #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ 28 #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ 29 #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ 30 #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ 31 #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) 32 33 static int emi26_writememory( struct usb_device *dev, int address, 34 const unsigned char *data, int length, 35 __u8 bRequest); 36 static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); 37 static int emi26_load_firmware (struct usb_device *dev); 38 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); 39 static void emi26_disconnect(struct usb_interface *intf); 40 41 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 42 static int emi26_writememory (struct usb_device *dev, int address, 43 const unsigned char *data, int length, 44 __u8 request) 45 { 46 int result; 47 unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); 48 49 if (!buffer) { 50 dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); 51 return -ENOMEM; 52 } 53 /* Note: usb_control_msg returns negative value on error or length of the 54 * data that was written! */ 55 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); 56 kfree (buffer); 57 return result; 58 } 59 60 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 61 static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) 62 { 63 int response; 64 dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); 65 /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */ 66 response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); 67 if (response < 0) { 68 dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); 69 } 70 return response; 71 } 72 73 #define FW_LOAD_SIZE 1023 74 75 static int emi26_load_firmware (struct usb_device *dev) 76 { 77 const struct firmware *loader_fw = NULL; 78 const struct firmware *bitstream_fw = NULL; 79 const struct firmware *firmware_fw = NULL; 80 const struct ihex_binrec *rec; 81 int err = -ENOMEM; 82 int i; 83 __u32 addr; /* Address to write */ 84 __u8 *buf; 85 86 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); 87 if (!buf) 88 goto wraperr; 89 90 err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); 91 if (err) 92 goto nofw; 93 94 err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", 95 &dev->dev); 96 if (err) 97 goto nofw; 98 99 err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", 100 &dev->dev); 101 if (err) { 102 nofw: 103 dev_err(&dev->dev, "%s - request_firmware() failed\n", 104 __func__); 105 goto wraperr; 106 } 107 108 /* Assert reset (stop the CPU in the EMI) */ 109 err = emi26_set_reset(dev,1); 110 if (err < 0) 111 goto wraperr; 112 113 rec = (const struct ihex_binrec *)loader_fw->data; 114 /* 1. We need to put the loader for the FPGA into the EZ-USB */ 115 while (rec) { 116 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 117 rec->data, be16_to_cpu(rec->len), 118 ANCHOR_LOAD_INTERNAL); 119 if (err < 0) 120 goto wraperr; 121 rec = ihex_next_binrec(rec); 122 } 123 124 /* De-assert reset (let the CPU run) */ 125 err = emi26_set_reset(dev,0); 126 if (err < 0) 127 goto wraperr; 128 msleep(250); /* let device settle */ 129 130 /* 2. We upload the FPGA firmware into the EMI 131 * Note: collect up to 1023 (yes!) bytes and send them with 132 * a single request. This is _much_ faster! */ 133 rec = (const struct ihex_binrec *)bitstream_fw->data; 134 do { 135 i = 0; 136 addr = be32_to_cpu(rec->addr); 137 138 /* intel hex records are terminated with type 0 element */ 139 while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { 140 memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); 141 i += be16_to_cpu(rec->len); 142 rec = ihex_next_binrec(rec); 143 } 144 err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); 145 if (err < 0) 146 goto wraperr; 147 } while (rec); 148 149 /* Assert reset (stop the CPU in the EMI) */ 150 err = emi26_set_reset(dev,1); 151 if (err < 0) 152 goto wraperr; 153 154 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ 155 for (rec = (const struct ihex_binrec *)loader_fw->data; 156 rec; rec = ihex_next_binrec(rec)) { 157 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 158 rec->data, be16_to_cpu(rec->len), 159 ANCHOR_LOAD_INTERNAL); 160 if (err < 0) 161 goto wraperr; 162 } 163 msleep(250); /* let device settle */ 164 165 /* De-assert reset (let the CPU run) */ 166 err = emi26_set_reset(dev,0); 167 if (err < 0) 168 goto wraperr; 169 170 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ 171 172 for (rec = (const struct ihex_binrec *)firmware_fw->data; 173 rec; rec = ihex_next_binrec(rec)) { 174 if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { 175 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 176 rec->data, be16_to_cpu(rec->len), 177 ANCHOR_LOAD_EXTERNAL); 178 if (err < 0) 179 goto wraperr; 180 } 181 } 182 183 /* Assert reset (stop the CPU in the EMI) */ 184 err = emi26_set_reset(dev,1); 185 if (err < 0) 186 goto wraperr; 187 188 for (rec = (const struct ihex_binrec *)firmware_fw->data; 189 rec; rec = ihex_next_binrec(rec)) { 190 if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { 191 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 192 rec->data, be16_to_cpu(rec->len), 193 ANCHOR_LOAD_INTERNAL); 194 if (err < 0) 195 goto wraperr; 196 } 197 } 198 199 /* De-assert reset (let the CPU run) */ 200 err = emi26_set_reset(dev,0); 201 if (err < 0) 202 goto wraperr; 203 msleep(250); /* let device settle */ 204 205 /* return 1 to fail the driver inialization 206 * and give real driver change to load */ 207 err = 1; 208 209 wraperr: 210 if (err < 0) 211 dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", 212 __func__, err); 213 214 release_firmware(loader_fw); 215 release_firmware(bitstream_fw); 216 release_firmware(firmware_fw); 217 218 kfree(buf); 219 return err; 220 } 221 222 static const struct usb_device_id id_table[] = { 223 { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, 224 { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, 225 { } /* Terminating entry */ 226 }; 227 228 MODULE_DEVICE_TABLE (usb, id_table); 229 230 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) 231 { 232 struct usb_device *dev = interface_to_usbdev(intf); 233 234 dev_info(&intf->dev, "%s start\n", __func__); 235 236 emi26_load_firmware(dev); 237 238 /* do not return the driver context, let real audio driver do that */ 239 return -EIO; 240 } 241 242 static void emi26_disconnect(struct usb_interface *intf) 243 { 244 } 245 246 static struct usb_driver emi26_driver = { 247 .name = "emi26 - firmware loader", 248 .probe = emi26_probe, 249 .disconnect = emi26_disconnect, 250 .id_table = id_table, 251 }; 252 253 module_usb_driver(emi26_driver); 254 255 MODULE_AUTHOR("Tapio Laxström"); 256 MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); 257 MODULE_LICENSE("GPL"); 258 259 MODULE_FIRMWARE("emi26/loader.fw"); 260 MODULE_FIRMWARE("emi26/bitstream.fw"); 261 MODULE_FIRMWARE("emi26/firmware.fw"); 262 /* vi:ai:syntax=c:sw=8:ts=8:tw=80 263 */ 264