1 /* 2 * Emagic EMI 2|6 usb audio interface firmware loader. 3 * Copyright (C) 2002 4 * Tapio Laxström (tapio.laxstrom@iptime.fi) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License, as published by 8 * the Free Software Foundation, version 2. 9 * 10 * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp 11 */ 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/slab.h> 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/usb.h> 18 #include <linux/delay.h> 19 #include <linux/firmware.h> 20 #include <linux/ihex.h> 21 22 #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ 23 #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ 24 #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ 25 26 #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ 27 #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ 28 #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ 29 #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ 30 #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ 31 #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) 32 33 static int emi26_writememory( struct usb_device *dev, int address, 34 const unsigned char *data, int length, 35 __u8 bRequest); 36 static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); 37 static int emi26_load_firmware (struct usb_device *dev); 38 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); 39 static void emi26_disconnect(struct usb_interface *intf); 40 41 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 42 static int emi26_writememory (struct usb_device *dev, int address, 43 const unsigned char *data, int length, 44 __u8 request) 45 { 46 int result; 47 unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); 48 49 if (!buffer) { 50 dev_err(&dev->dev, "kmalloc(%d) failed.\n", length); 51 return -ENOMEM; 52 } 53 /* Note: usb_control_msg returns negative value on error or length of the 54 * data that was written! */ 55 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); 56 kfree (buffer); 57 return result; 58 } 59 60 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 61 static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) 62 { 63 int response; 64 dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit); 65 /* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */ 66 response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); 67 if (response < 0) { 68 dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit); 69 } 70 return response; 71 } 72 73 #define FW_LOAD_SIZE 1023 74 75 static int emi26_load_firmware (struct usb_device *dev) 76 { 77 const struct firmware *loader_fw = NULL; 78 const struct firmware *bitstream_fw = NULL; 79 const struct firmware *firmware_fw = NULL; 80 const struct ihex_binrec *rec; 81 int err; 82 int i; 83 __u32 addr; /* Address to write */ 84 __u8 *buf; 85 86 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); 87 if (!buf) { 88 dev_err(&dev->dev, "%s - error loading firmware: error = %d\n", 89 __func__, -ENOMEM); 90 err = -ENOMEM; 91 goto wraperr; 92 } 93 94 err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev); 95 if (err) 96 goto nofw; 97 98 err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw", 99 &dev->dev); 100 if (err) 101 goto nofw; 102 103 err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw", 104 &dev->dev); 105 if (err) { 106 nofw: 107 dev_err(&dev->dev, "%s - request_firmware() failed\n", 108 __func__); 109 goto wraperr; 110 } 111 112 /* Assert reset (stop the CPU in the EMI) */ 113 err = emi26_set_reset(dev,1); 114 if (err < 0) { 115 dev_err(&dev->dev,"%s - error loading firmware: error = %d\n", 116 __func__, err); 117 goto wraperr; 118 } 119 120 rec = (const struct ihex_binrec *)loader_fw->data; 121 /* 1. We need to put the loader for the FPGA into the EZ-USB */ 122 while (rec) { 123 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 124 rec->data, be16_to_cpu(rec->len), 125 ANCHOR_LOAD_INTERNAL); 126 if (err < 0) { 127 err("%s - error loading firmware: error = %d", __func__, err); 128 goto wraperr; 129 } 130 rec = ihex_next_binrec(rec); 131 } 132 133 /* De-assert reset (let the CPU run) */ 134 err = emi26_set_reset(dev,0); 135 if (err < 0) { 136 err("%s - error loading firmware: error = %d", __func__, err); 137 goto wraperr; 138 } 139 msleep(250); /* let device settle */ 140 141 /* 2. We upload the FPGA firmware into the EMI 142 * Note: collect up to 1023 (yes!) bytes and send them with 143 * a single request. This is _much_ faster! */ 144 rec = (const struct ihex_binrec *)bitstream_fw->data; 145 do { 146 i = 0; 147 addr = be32_to_cpu(rec->addr); 148 149 /* intel hex records are terminated with type 0 element */ 150 while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) { 151 memcpy(buf + i, rec->data, be16_to_cpu(rec->len)); 152 i += be16_to_cpu(rec->len); 153 rec = ihex_next_binrec(rec); 154 } 155 err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); 156 if (err < 0) { 157 err("%s - error loading firmware: error = %d", __func__, err); 158 goto wraperr; 159 } 160 } while (rec); 161 162 /* Assert reset (stop the CPU in the EMI) */ 163 err = emi26_set_reset(dev,1); 164 if (err < 0) { 165 err("%s - error loading firmware: error = %d", __func__, err); 166 goto wraperr; 167 } 168 169 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ 170 for (rec = (const struct ihex_binrec *)loader_fw->data; 171 rec; rec = ihex_next_binrec(rec)) { 172 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 173 rec->data, be16_to_cpu(rec->len), 174 ANCHOR_LOAD_INTERNAL); 175 if (err < 0) { 176 err("%s - error loading firmware: error = %d", __func__, err); 177 goto wraperr; 178 } 179 } 180 msleep(250); /* let device settle */ 181 182 /* De-assert reset (let the CPU run) */ 183 err = emi26_set_reset(dev,0); 184 if (err < 0) { 185 err("%s - error loading firmware: error = %d", __func__, err); 186 goto wraperr; 187 } 188 189 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ 190 191 for (rec = (const struct ihex_binrec *)firmware_fw->data; 192 rec; rec = ihex_next_binrec(rec)) { 193 if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) { 194 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 195 rec->data, be16_to_cpu(rec->len), 196 ANCHOR_LOAD_EXTERNAL); 197 if (err < 0) { 198 err("%s - error loading firmware: error = %d", __func__, err); 199 goto wraperr; 200 } 201 } 202 } 203 204 /* Assert reset (stop the CPU in the EMI) */ 205 err = emi26_set_reset(dev,1); 206 if (err < 0) { 207 err("%s - error loading firmware: error = %d", __func__, err); 208 goto wraperr; 209 } 210 211 for (rec = (const struct ihex_binrec *)firmware_fw->data; 212 rec; rec = ihex_next_binrec(rec)) { 213 if (INTERNAL_RAM(be32_to_cpu(rec->addr))) { 214 err = emi26_writememory(dev, be32_to_cpu(rec->addr), 215 rec->data, be16_to_cpu(rec->len), 216 ANCHOR_LOAD_INTERNAL); 217 if (err < 0) { 218 err("%s - error loading firmware: error = %d", __func__, err); 219 goto wraperr; 220 } 221 } 222 } 223 224 /* De-assert reset (let the CPU run) */ 225 err = emi26_set_reset(dev,0); 226 if (err < 0) { 227 err("%s - error loading firmware: error = %d", __func__, err); 228 goto wraperr; 229 } 230 msleep(250); /* let device settle */ 231 232 /* return 1 to fail the driver inialization 233 * and give real driver change to load */ 234 err = 1; 235 236 wraperr: 237 release_firmware(loader_fw); 238 release_firmware(bitstream_fw); 239 release_firmware(firmware_fw); 240 241 kfree(buf); 242 return err; 243 } 244 245 static const struct usb_device_id id_table[] = { 246 { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, 247 { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, 248 { } /* Terminating entry */ 249 }; 250 251 MODULE_DEVICE_TABLE (usb, id_table); 252 253 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) 254 { 255 struct usb_device *dev = interface_to_usbdev(intf); 256 257 dev_info(&intf->dev, "%s start\n", __func__); 258 259 emi26_load_firmware(dev); 260 261 /* do not return the driver context, let real audio driver do that */ 262 return -EIO; 263 } 264 265 static void emi26_disconnect(struct usb_interface *intf) 266 { 267 } 268 269 static struct usb_driver emi26_driver = { 270 .name = "emi26 - firmware loader", 271 .probe = emi26_probe, 272 .disconnect = emi26_disconnect, 273 .id_table = id_table, 274 }; 275 276 module_usb_driver(emi26_driver); 277 278 MODULE_AUTHOR("Tapio Laxström"); 279 MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); 280 MODULE_LICENSE("GPL"); 281 282 MODULE_FIRMWARE("emi26/loader.fw"); 283 MODULE_FIRMWARE("emi26/bitstream.fw"); 284 MODULE_FIRMWARE("emi26/firmware.fw"); 285 /* vi:ai:syntax=c:sw=8:ts=8:tw=80 286 */ 287