1 /* 2 * Emagic EMI 2|6 usb audio interface firmware loader. 3 * Copyright (C) 2002 4 * Tapio Laxstr�m (tapio.laxstrom@iptime.fi) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License, as published by 8 * the Free Software Foundation, version 2. 9 * 10 * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp 11 */ 12 #include <linux/kernel.h> 13 #include <linux/errno.h> 14 #include <linux/slab.h> 15 #include <linux/module.h> 16 #include <linux/init.h> 17 #include <linux/usb.h> 18 #include <linux/delay.h> 19 20 #define MAX_INTEL_HEX_RECORD_LENGTH 16 21 typedef struct _INTEL_HEX_RECORD 22 { 23 __u32 length; 24 __u32 address; 25 __u32 type; 26 __u8 data[MAX_INTEL_HEX_RECORD_LENGTH]; 27 } INTEL_HEX_RECORD, *PINTEL_HEX_RECORD; 28 29 /* include firmware (variables) */ 30 #include "emi26_fw.h" 31 32 #define EMI26_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */ 33 #define EMI26_PRODUCT_ID 0x0100 /* EMI 2|6 without firmware */ 34 #define EMI26B_PRODUCT_ID 0x0102 /* EMI 2|6 without firmware */ 35 36 #define ANCHOR_LOAD_INTERNAL 0xA0 /* Vendor specific request code for Anchor Upload/Download (This one is implemented in the core) */ 37 #define ANCHOR_LOAD_EXTERNAL 0xA3 /* This command is not implemented in the core. Requires firmware */ 38 #define ANCHOR_LOAD_FPGA 0xA5 /* This command is not implemented in the core. Requires firmware. Emagic extension */ 39 #define MAX_INTERNAL_ADDRESS 0x1B3F /* This is the highest internal RAM address for the AN2131Q */ 40 #define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */ 41 #define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS) 42 43 static int emi26_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest); 44 static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); 45 static int emi26_load_firmware (struct usb_device *dev); 46 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); 47 static void emi26_disconnect(struct usb_interface *intf); 48 static int __init emi26_init (void); 49 static void __exit emi26_exit (void); 50 51 52 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 53 static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request) 54 { 55 int result; 56 unsigned char *buffer = kmemdup(data, length, GFP_KERNEL); 57 58 if (!buffer) { 59 err("emi26: kmalloc(%d) failed.", length); 60 return -ENOMEM; 61 } 62 /* Note: usb_control_msg returns negative value on error or length of the 63 * data that was written! */ 64 result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300); 65 kfree (buffer); 66 return result; 67 } 68 69 /* thanks to drivers/usb/serial/keyspan_pda.c code */ 70 static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit) 71 { 72 int response; 73 info("%s - %d", __FUNCTION__, reset_bit); 74 /* printk(KERN_DEBUG "%s - %d", __FUNCTION__, reset_bit); */ 75 response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0); 76 if (response < 0) { 77 err("emi26: set_reset (%d) failed", reset_bit); 78 } 79 return response; 80 } 81 82 #define FW_LOAD_SIZE 1023 83 84 static int emi26_load_firmware (struct usb_device *dev) 85 { 86 int err; 87 int i; 88 int pos = 0; /* Position in hex record */ 89 __u32 addr; /* Address to write */ 90 __u8 *buf; 91 92 buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL); 93 if (!buf) { 94 err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM); 95 err = -ENOMEM; 96 goto wraperr; 97 } 98 99 /* Assert reset (stop the CPU in the EMI) */ 100 err = emi26_set_reset(dev,1); 101 if (err < 0) { 102 err( "%s - error loading firmware: error = %d", __FUNCTION__, err); 103 goto wraperr; 104 } 105 106 /* 1. We need to put the loader for the FPGA into the EZ-USB */ 107 for (i=0; g_Loader[i].type == 0; i++) { 108 err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); 109 if (err < 0) { 110 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 111 goto wraperr; 112 } 113 } 114 115 /* De-assert reset (let the CPU run) */ 116 err = emi26_set_reset(dev,0); 117 msleep(250); /* let device settle */ 118 119 /* 2. We upload the FPGA firmware into the EMI 120 * Note: collect up to 1023 (yes!) bytes and send them with 121 * a single request. This is _much_ faster! */ 122 do { 123 i = 0; 124 addr = g_bitstream[pos].address; 125 126 /* intel hex records are terminated with type 0 element */ 127 while ((g_bitstream[pos].type == 0) && (i + g_bitstream[pos].length < FW_LOAD_SIZE)) { 128 memcpy(buf + i, g_bitstream[pos].data, g_bitstream[pos].length); 129 i += g_bitstream[pos].length; 130 pos++; 131 } 132 err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA); 133 if (err < 0) { 134 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 135 goto wraperr; 136 } 137 } while (i > 0); 138 139 /* Assert reset (stop the CPU in the EMI) */ 140 err = emi26_set_reset(dev,1); 141 if (err < 0) { 142 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 143 goto wraperr; 144 } 145 146 /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */ 147 for (i=0; g_Loader[i].type == 0; i++) { 148 err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL); 149 if (err < 0) { 150 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 151 goto wraperr; 152 } 153 } 154 msleep(250); /* let device settle */ 155 156 /* De-assert reset (let the CPU run) */ 157 err = emi26_set_reset(dev,0); 158 if (err < 0) { 159 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 160 goto wraperr; 161 } 162 163 /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */ 164 for (i=0; g_Firmware[i].type == 0; i++) { 165 if (!INTERNAL_RAM(g_Firmware[i].address)) { 166 err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL); 167 if (err < 0) { 168 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 169 goto wraperr; 170 } 171 } 172 } 173 174 /* Assert reset (stop the CPU in the EMI) */ 175 err = emi26_set_reset(dev,1); 176 if (err < 0) { 177 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 178 goto wraperr; 179 } 180 181 for (i=0; g_Firmware[i].type == 0; i++) { 182 if (INTERNAL_RAM(g_Firmware[i].address)) { 183 err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL); 184 if (err < 0) { 185 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 186 goto wraperr; 187 } 188 } 189 } 190 191 /* De-assert reset (let the CPU run) */ 192 err = emi26_set_reset(dev,0); 193 if (err < 0) { 194 err("%s - error loading firmware: error = %d", __FUNCTION__, err); 195 goto wraperr; 196 } 197 msleep(250); /* let device settle */ 198 199 /* return 1 to fail the driver inialization 200 * and give real driver change to load */ 201 err = 1; 202 203 wraperr: 204 kfree(buf); 205 return err; 206 } 207 208 static struct usb_device_id id_table [] = { 209 { USB_DEVICE(EMI26_VENDOR_ID, EMI26_PRODUCT_ID) }, 210 { USB_DEVICE(EMI26_VENDOR_ID, EMI26B_PRODUCT_ID) }, 211 { } /* Terminating entry */ 212 }; 213 214 MODULE_DEVICE_TABLE (usb, id_table); 215 216 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id) 217 { 218 struct usb_device *dev = interface_to_usbdev(intf); 219 220 info("%s start", __FUNCTION__); 221 222 emi26_load_firmware(dev); 223 224 /* do not return the driver context, let real audio driver do that */ 225 return -EIO; 226 } 227 228 static void emi26_disconnect(struct usb_interface *intf) 229 { 230 } 231 232 static struct usb_driver emi26_driver = { 233 .name = "emi26 - firmware loader", 234 .probe = emi26_probe, 235 .disconnect = emi26_disconnect, 236 .id_table = id_table, 237 }; 238 239 static int __init emi26_init (void) 240 { 241 return usb_register(&emi26_driver); 242 } 243 244 static void __exit emi26_exit (void) 245 { 246 usb_deregister (&emi26_driver); 247 } 248 249 module_init(emi26_init); 250 module_exit(emi26_exit); 251 252 MODULE_AUTHOR("tapio laxstr�m"); 253 MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader."); 254 MODULE_LICENSE("GPL"); 255 256 /* vi:ai:syntax=c:sw=8:ts=8:tw=80 257 */ 258