1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * cypress_cy7c63.c 4 * 5 * Copyright (c) 2006-2007 Oliver Bock (bock@tfh-berlin.de) 6 * 7 * This driver is based on the Cypress USB Driver by Marcus Maul 8 * (cyport) and the 2.0 version of Greg Kroah-Hartman's 9 * USB Skeleton driver. 10 * 11 * This is a generic driver for the Cypress CY7C63xxx family. 12 * For the time being it enables you to read from and write to 13 * the single I/O ports of the device. 14 * 15 * Supported vendors: AK Modul-Bus Computer GmbH 16 * (Firmware "Port-Chip") 17 * 18 * Supported devices: CY7C63001A-PC 19 * CY7C63001C-PXC 20 * CY7C63001C-SXC 21 * 22 * Supported functions: Read/Write Ports 23 * 24 * 25 * For up-to-date information please visit: 26 * http://www.obock.de/kernel/cypress 27 */ 28 29 #include <linux/module.h> 30 #include <linux/kernel.h> 31 #include <linux/slab.h> 32 #include <linux/usb.h> 33 34 #define DRIVER_AUTHOR "Oliver Bock (bock@tfh-berlin.de)" 35 #define DRIVER_DESC "Cypress CY7C63xxx USB driver" 36 37 #define CYPRESS_VENDOR_ID 0xa2c 38 #define CYPRESS_PRODUCT_ID 0x8 39 40 #define CYPRESS_READ_PORT 0x4 41 #define CYPRESS_WRITE_PORT 0x5 42 43 #define CYPRESS_READ_RAM 0x2 44 #define CYPRESS_WRITE_RAM 0x3 45 #define CYPRESS_READ_ROM 0x1 46 47 #define CYPRESS_READ_PORT_ID0 0 48 #define CYPRESS_WRITE_PORT_ID0 0 49 #define CYPRESS_READ_PORT_ID1 0x2 50 #define CYPRESS_WRITE_PORT_ID1 1 51 52 #define CYPRESS_MAX_REQSIZE 8 53 54 55 /* table of devices that work with this driver */ 56 static const struct usb_device_id cypress_table[] = { 57 { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, 58 { } 59 }; 60 MODULE_DEVICE_TABLE(usb, cypress_table); 61 62 /* structure to hold all of our device specific stuff */ 63 struct cypress { 64 struct usb_device * udev; 65 unsigned char port[2]; 66 }; 67 68 /* used to send usb control messages to device */ 69 static int vendor_command(struct cypress *dev, unsigned char request, 70 unsigned char address, unsigned char data) 71 { 72 int retval = 0; 73 unsigned int pipe; 74 unsigned char *iobuf; 75 76 /* allocate some memory for the i/o buffer*/ 77 iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL); 78 if (!iobuf) { 79 retval = -ENOMEM; 80 goto error; 81 } 82 83 dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); 84 85 /* prepare usb control message and send it upstream */ 86 pipe = usb_rcvctrlpipe(dev->udev, 0); 87 retval = usb_control_msg(dev->udev, pipe, request, 88 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, 89 address, data, iobuf, CYPRESS_MAX_REQSIZE, 90 USB_CTRL_GET_TIMEOUT); 91 92 /* store returned data (more READs to be added) */ 93 switch (request) { 94 case CYPRESS_READ_PORT: 95 if (address == CYPRESS_READ_PORT_ID0) { 96 dev->port[0] = iobuf[1]; 97 dev_dbg(&dev->udev->dev, 98 "READ_PORT0 returned: %d\n", 99 dev->port[0]); 100 } 101 else if (address == CYPRESS_READ_PORT_ID1) { 102 dev->port[1] = iobuf[1]; 103 dev_dbg(&dev->udev->dev, 104 "READ_PORT1 returned: %d\n", 105 dev->port[1]); 106 } 107 break; 108 } 109 110 kfree(iobuf); 111 error: 112 return retval; 113 } 114 115 /* write port value */ 116 static ssize_t write_port(struct device *dev, struct device_attribute *attr, 117 const char *buf, size_t count, 118 int port_num, int write_id) 119 { 120 int value = -1; 121 int result = 0; 122 123 struct usb_interface *intf = to_usb_interface(dev); 124 struct cypress *cyp = usb_get_intfdata(intf); 125 126 dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num); 127 128 /* validate input data */ 129 if (sscanf(buf, "%d", &value) < 1) { 130 result = -EINVAL; 131 goto error; 132 } 133 if (value < 0 || value > 255) { 134 result = -EINVAL; 135 goto error; 136 } 137 138 result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id, 139 (unsigned char)value); 140 141 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); 142 error: 143 return result < 0 ? result : count; 144 } 145 146 /* attribute callback handler (write) */ 147 static ssize_t port0_store(struct device *dev, 148 struct device_attribute *attr, 149 const char *buf, size_t count) 150 { 151 return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0); 152 } 153 154 /* attribute callback handler (write) */ 155 static ssize_t port1_store(struct device *dev, 156 struct device_attribute *attr, 157 const char *buf, size_t count) 158 { 159 return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1); 160 } 161 162 /* read port value */ 163 static ssize_t read_port(struct device *dev, struct device_attribute *attr, 164 char *buf, int port_num, int read_id) 165 { 166 int result = 0; 167 168 struct usb_interface *intf = to_usb_interface(dev); 169 struct cypress *cyp = usb_get_intfdata(intf); 170 171 dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num); 172 173 result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0); 174 175 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); 176 177 return sprintf(buf, "%d", cyp->port[port_num]); 178 } 179 180 /* attribute callback handler (read) */ 181 static ssize_t port0_show(struct device *dev, 182 struct device_attribute *attr, char *buf) 183 { 184 return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0); 185 } 186 static DEVICE_ATTR_RW(port0); 187 188 /* attribute callback handler (read) */ 189 static ssize_t port1_show(struct device *dev, 190 struct device_attribute *attr, char *buf) 191 { 192 return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); 193 } 194 static DEVICE_ATTR_RW(port1); 195 196 static struct attribute *cypress_attrs[] = { 197 &dev_attr_port0.attr, 198 &dev_attr_port1.attr, 199 NULL, 200 }; 201 ATTRIBUTE_GROUPS(cypress); 202 203 static int cypress_probe(struct usb_interface *interface, 204 const struct usb_device_id *id) 205 { 206 struct cypress *dev = NULL; 207 int retval = -ENOMEM; 208 209 /* allocate memory for our device state and initialize it */ 210 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 211 if (!dev) 212 goto error_mem; 213 214 dev->udev = usb_get_dev(interface_to_usbdev(interface)); 215 216 /* save our data pointer in this interface device */ 217 usb_set_intfdata(interface, dev); 218 219 /* let the user know that the device is now attached */ 220 dev_info(&interface->dev, 221 "Cypress CY7C63xxx device now attached\n"); 222 return 0; 223 224 error_mem: 225 return retval; 226 } 227 228 static void cypress_disconnect(struct usb_interface *interface) 229 { 230 struct cypress *dev; 231 232 dev = usb_get_intfdata(interface); 233 234 /* the intfdata can be set to NULL only after the 235 * device files have been removed */ 236 usb_set_intfdata(interface, NULL); 237 238 usb_put_dev(dev->udev); 239 240 dev_info(&interface->dev, 241 "Cypress CY7C63xxx device now disconnected\n"); 242 243 kfree(dev); 244 } 245 246 static struct usb_driver cypress_driver = { 247 .name = "cypress_cy7c63", 248 .probe = cypress_probe, 249 .disconnect = cypress_disconnect, 250 .id_table = cypress_table, 251 .dev_groups = cypress_groups, 252 }; 253 254 module_usb_driver(cypress_driver); 255 256 MODULE_AUTHOR(DRIVER_AUTHOR); 257 MODULE_DESCRIPTION(DRIVER_DESC); 258 259 MODULE_LICENSE("GPL"); 260