1 /* 2 * cypress_cy7c63.c 3 * 4 * Copyright (c) 2006-2007 Oliver Bock (bock@tfh-berlin.de) 5 * 6 * This driver is based on the Cypress USB Driver by Marcus Maul 7 * (cyport) and the 2.0 version of Greg Kroah-Hartman's 8 * USB Skeleton driver. 9 * 10 * This is a generic driver for the Cypress CY7C63xxx family. 11 * For the time being it enables you to read from and write to 12 * the single I/O ports of the device. 13 * 14 * Supported vendors: AK Modul-Bus Computer GmbH 15 * (Firmware "Port-Chip") 16 * 17 * Supported devices: CY7C63001A-PC 18 * CY7C63001C-PXC 19 * CY7C63001C-SXC 20 * 21 * Supported functions: Read/Write Ports 22 * 23 * 24 * For up-to-date information please visit: 25 * http://www.obock.de/kernel/cypress 26 * 27 * This program is free software; you can redistribute it and/or 28 * modify it under the terms of the GNU General Public License as 29 * published by the Free Software Foundation, version 2. 30 */ 31 32 #include <linux/init.h> 33 #include <linux/module.h> 34 #include <linux/kernel.h> 35 #include <linux/slab.h> 36 #include <linux/usb.h> 37 38 #define DRIVER_AUTHOR "Oliver Bock (bock@tfh-berlin.de)" 39 #define DRIVER_DESC "Cypress CY7C63xxx USB driver" 40 41 #define CYPRESS_VENDOR_ID 0xa2c 42 #define CYPRESS_PRODUCT_ID 0x8 43 44 #define CYPRESS_READ_PORT 0x4 45 #define CYPRESS_WRITE_PORT 0x5 46 47 #define CYPRESS_READ_RAM 0x2 48 #define CYPRESS_WRITE_RAM 0x3 49 #define CYPRESS_READ_ROM 0x1 50 51 #define CYPRESS_READ_PORT_ID0 0 52 #define CYPRESS_WRITE_PORT_ID0 0 53 #define CYPRESS_READ_PORT_ID1 0x2 54 #define CYPRESS_WRITE_PORT_ID1 1 55 56 #define CYPRESS_MAX_REQSIZE 8 57 58 59 /* table of devices that work with this driver */ 60 static const struct usb_device_id cypress_table[] = { 61 { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) }, 62 { } 63 }; 64 MODULE_DEVICE_TABLE(usb, cypress_table); 65 66 /* structure to hold all of our device specific stuff */ 67 struct cypress { 68 struct usb_device * udev; 69 unsigned char port[2]; 70 }; 71 72 /* used to send usb control messages to device */ 73 static int vendor_command(struct cypress *dev, unsigned char request, 74 unsigned char address, unsigned char data) 75 { 76 int retval = 0; 77 unsigned int pipe; 78 unsigned char *iobuf; 79 80 /* allocate some memory for the i/o buffer*/ 81 iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL); 82 if (!iobuf) { 83 dev_err(&dev->udev->dev, "Out of memory!\n"); 84 retval = -ENOMEM; 85 goto error; 86 } 87 88 dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data); 89 90 /* prepare usb control message and send it upstream */ 91 pipe = usb_rcvctrlpipe(dev->udev, 0); 92 retval = usb_control_msg(dev->udev, pipe, request, 93 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER, 94 address, data, iobuf, CYPRESS_MAX_REQSIZE, 95 USB_CTRL_GET_TIMEOUT); 96 97 /* store returned data (more READs to be added) */ 98 switch (request) { 99 case CYPRESS_READ_PORT: 100 if (address == CYPRESS_READ_PORT_ID0) { 101 dev->port[0] = iobuf[1]; 102 dev_dbg(&dev->udev->dev, 103 "READ_PORT0 returned: %d\n", 104 dev->port[0]); 105 } 106 else if (address == CYPRESS_READ_PORT_ID1) { 107 dev->port[1] = iobuf[1]; 108 dev_dbg(&dev->udev->dev, 109 "READ_PORT1 returned: %d\n", 110 dev->port[1]); 111 } 112 break; 113 } 114 115 kfree(iobuf); 116 error: 117 return retval; 118 } 119 120 /* write port value */ 121 static ssize_t write_port(struct device *dev, struct device_attribute *attr, 122 const char *buf, size_t count, 123 int port_num, int write_id) 124 { 125 int value = -1; 126 int result = 0; 127 128 struct usb_interface *intf = to_usb_interface(dev); 129 struct cypress *cyp = usb_get_intfdata(intf); 130 131 dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num); 132 133 /* validate input data */ 134 if (sscanf(buf, "%d", &value) < 1) { 135 result = -EINVAL; 136 goto error; 137 } 138 if (value < 0 || value > 255) { 139 result = -EINVAL; 140 goto error; 141 } 142 143 result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id, 144 (unsigned char)value); 145 146 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); 147 error: 148 return result < 0 ? result : count; 149 } 150 151 /* attribute callback handler (write) */ 152 static ssize_t set_port0_handler(struct device *dev, 153 struct device_attribute *attr, 154 const char *buf, size_t count) 155 { 156 return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0); 157 } 158 159 /* attribute callback handler (write) */ 160 static ssize_t set_port1_handler(struct device *dev, 161 struct device_attribute *attr, 162 const char *buf, size_t count) 163 { 164 return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1); 165 } 166 167 /* read port value */ 168 static ssize_t read_port(struct device *dev, struct device_attribute *attr, 169 char *buf, int port_num, int read_id) 170 { 171 int result = 0; 172 173 struct usb_interface *intf = to_usb_interface(dev); 174 struct cypress *cyp = usb_get_intfdata(intf); 175 176 dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num); 177 178 result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0); 179 180 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result); 181 182 return sprintf(buf, "%d", cyp->port[port_num]); 183 } 184 185 /* attribute callback handler (read) */ 186 static ssize_t get_port0_handler(struct device *dev, 187 struct device_attribute *attr, char *buf) 188 { 189 return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0); 190 } 191 192 /* attribute callback handler (read) */ 193 static ssize_t get_port1_handler(struct device *dev, 194 struct device_attribute *attr, char *buf) 195 { 196 return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1); 197 } 198 199 static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler); 200 201 static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler); 202 203 204 static int cypress_probe(struct usb_interface *interface, 205 const struct usb_device_id *id) 206 { 207 struct cypress *dev = NULL; 208 int retval = -ENOMEM; 209 210 /* allocate memory for our device state and initialize it */ 211 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 212 if (dev == NULL) { 213 dev_err(&interface->dev, "Out of memory!\n"); 214 goto error_mem; 215 } 216 217 dev->udev = usb_get_dev(interface_to_usbdev(interface)); 218 219 /* save our data pointer in this interface device */ 220 usb_set_intfdata(interface, dev); 221 222 /* create device attribute files */ 223 retval = device_create_file(&interface->dev, &dev_attr_port0); 224 if (retval) 225 goto error; 226 retval = device_create_file(&interface->dev, &dev_attr_port1); 227 if (retval) 228 goto error; 229 230 /* let the user know that the device is now attached */ 231 dev_info(&interface->dev, 232 "Cypress CY7C63xxx device now attached\n"); 233 return 0; 234 235 error: 236 device_remove_file(&interface->dev, &dev_attr_port0); 237 device_remove_file(&interface->dev, &dev_attr_port1); 238 usb_set_intfdata(interface, NULL); 239 usb_put_dev(dev->udev); 240 kfree(dev); 241 242 error_mem: 243 return retval; 244 } 245 246 static void cypress_disconnect(struct usb_interface *interface) 247 { 248 struct cypress *dev; 249 250 dev = usb_get_intfdata(interface); 251 252 /* remove device attribute files */ 253 device_remove_file(&interface->dev, &dev_attr_port0); 254 device_remove_file(&interface->dev, &dev_attr_port1); 255 /* the intfdata can be set to NULL only after the 256 * device files have been removed */ 257 usb_set_intfdata(interface, NULL); 258 259 usb_put_dev(dev->udev); 260 261 dev_info(&interface->dev, 262 "Cypress CY7C63xxx device now disconnected\n"); 263 264 kfree(dev); 265 } 266 267 static struct usb_driver cypress_driver = { 268 .name = "cypress_cy7c63", 269 .probe = cypress_probe, 270 .disconnect = cypress_disconnect, 271 .id_table = cypress_table, 272 }; 273 274 static int __init cypress_init(void) 275 { 276 int result; 277 278 /* register this driver with the USB subsystem */ 279 result = usb_register(&cypress_driver); 280 if (result) 281 printk(KERN_ERR KBUILD_MODNAME ": usb_register failed! " 282 "Error number: %d\n", result); 283 284 return result; 285 } 286 287 static void __exit cypress_exit(void) 288 { 289 /* deregister this driver with the USB subsystem */ 290 usb_deregister(&cypress_driver); 291 } 292 293 module_init(cypress_init); 294 module_exit(cypress_exit); 295 296 MODULE_AUTHOR(DRIVER_AUTHOR); 297 MODULE_DESCRIPTION(DRIVER_DESC); 298 299 MODULE_LICENSE("GPL"); 300