1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * adutux - driver for ADU devices from Ontrak Control Systems 4 * This is an experimental driver. Use at your own risk. 5 * This driver is not supported by Ontrak Control Systems. 6 * 7 * Copyright (c) 2003 John Homppi (SCO, leave this notice here) 8 * 9 * derived from the Lego USB Tower driver 0.56: 10 * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net> 11 * 2001 Juergen Stuber <stuber@loria.fr> 12 * that was derived from USB Skeleton driver - 0.5 13 * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) 14 * 15 */ 16 17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 18 19 #include <linux/kernel.h> 20 #include <linux/sched/signal.h> 21 #include <linux/errno.h> 22 #include <linux/slab.h> 23 #include <linux/module.h> 24 #include <linux/usb.h> 25 #include <linux/mutex.h> 26 #include <linux/uaccess.h> 27 28 #define DRIVER_AUTHOR "John Homppi" 29 #define DRIVER_DESC "adutux (see www.ontrak.net)" 30 31 /* Define these values to match your device */ 32 #define ADU_VENDOR_ID 0x0a07 33 #define ADU_PRODUCT_ID 0x0064 34 35 /* table of devices that work with this driver */ 36 static const struct usb_device_id device_table[] = { 37 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */ 38 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */ 39 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */ 40 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */ 41 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */ 42 { USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */ 43 { } /* Terminating entry */ 44 }; 45 46 MODULE_DEVICE_TABLE(usb, device_table); 47 48 #ifdef CONFIG_USB_DYNAMIC_MINORS 49 #define ADU_MINOR_BASE 0 50 #else 51 #define ADU_MINOR_BASE 67 52 #endif 53 54 /* we can have up to this number of device plugged in at once */ 55 #define MAX_DEVICES 16 56 57 #define COMMAND_TIMEOUT (2*HZ) 58 59 /* 60 * The locking scheme is a vanilla 3-lock: 61 * adu_device.buflock: A spinlock, covers what IRQs touch. 62 * adutux_mutex: A Static lock to cover open_count. It would also cover 63 * any globals, but we don't have them in 2.6. 64 * adu_device.mtx: A mutex to hold across sleepers like copy_from_user. 65 * It covers all of adu_device, except the open_count 66 * and what .buflock covers. 67 */ 68 69 /* Structure to hold all of our device specific stuff */ 70 struct adu_device { 71 struct mutex mtx; 72 struct usb_device *udev; /* save off the usb device pointer */ 73 struct usb_interface *interface; 74 unsigned int minor; /* the starting minor number for this device */ 75 char serial_number[8]; 76 77 int open_count; /* number of times this port has been opened */ 78 unsigned long disconnected:1; 79 80 char *read_buffer_primary; 81 int read_buffer_length; 82 char *read_buffer_secondary; 83 int secondary_head; 84 int secondary_tail; 85 spinlock_t buflock; 86 87 wait_queue_head_t read_wait; 88 wait_queue_head_t write_wait; 89 90 char *interrupt_in_buffer; 91 struct usb_endpoint_descriptor *interrupt_in_endpoint; 92 struct urb *interrupt_in_urb; 93 int read_urb_finished; 94 95 char *interrupt_out_buffer; 96 struct usb_endpoint_descriptor *interrupt_out_endpoint; 97 struct urb *interrupt_out_urb; 98 int out_urb_finished; 99 }; 100 101 static DEFINE_MUTEX(adutux_mutex); 102 103 static struct usb_driver adu_driver; 104 105 static inline void adu_debug_data(struct device *dev, const char *function, 106 int size, const unsigned char *data) 107 { 108 dev_dbg(dev, "%s - length = %d, data = %*ph\n", 109 function, size, size, data); 110 } 111 112 /* 113 * adu_abort_transfers 114 * aborts transfers and frees associated data structures 115 */ 116 static void adu_abort_transfers(struct adu_device *dev) 117 { 118 unsigned long flags; 119 120 if (dev->disconnected) 121 return; 122 123 /* shutdown transfer */ 124 125 /* XXX Anchor these instead */ 126 spin_lock_irqsave(&dev->buflock, flags); 127 if (!dev->read_urb_finished) { 128 spin_unlock_irqrestore(&dev->buflock, flags); 129 usb_kill_urb(dev->interrupt_in_urb); 130 } else 131 spin_unlock_irqrestore(&dev->buflock, flags); 132 133 spin_lock_irqsave(&dev->buflock, flags); 134 if (!dev->out_urb_finished) { 135 spin_unlock_irqrestore(&dev->buflock, flags); 136 wait_event_timeout(dev->write_wait, dev->out_urb_finished, 137 COMMAND_TIMEOUT); 138 usb_kill_urb(dev->interrupt_out_urb); 139 } else 140 spin_unlock_irqrestore(&dev->buflock, flags); 141 } 142 143 static void adu_delete(struct adu_device *dev) 144 { 145 /* free data structures */ 146 usb_free_urb(dev->interrupt_in_urb); 147 usb_free_urb(dev->interrupt_out_urb); 148 kfree(dev->read_buffer_primary); 149 kfree(dev->read_buffer_secondary); 150 kfree(dev->interrupt_in_buffer); 151 kfree(dev->interrupt_out_buffer); 152 usb_put_dev(dev->udev); 153 kfree(dev); 154 } 155 156 static void adu_interrupt_in_callback(struct urb *urb) 157 { 158 struct adu_device *dev = urb->context; 159 int status = urb->status; 160 unsigned long flags; 161 162 adu_debug_data(&dev->udev->dev, __func__, 163 urb->actual_length, urb->transfer_buffer); 164 165 spin_lock_irqsave(&dev->buflock, flags); 166 167 if (status != 0) { 168 if ((status != -ENOENT) && (status != -ECONNRESET) && 169 (status != -ESHUTDOWN)) { 170 dev_dbg(&dev->udev->dev, 171 "%s : nonzero status received: %d\n", 172 __func__, status); 173 } 174 goto exit; 175 } 176 177 if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) { 178 if (dev->read_buffer_length < 179 (4 * usb_endpoint_maxp(dev->interrupt_in_endpoint)) - 180 (urb->actual_length)) { 181 memcpy (dev->read_buffer_primary + 182 dev->read_buffer_length, 183 dev->interrupt_in_buffer, urb->actual_length); 184 185 dev->read_buffer_length += urb->actual_length; 186 dev_dbg(&dev->udev->dev,"%s reading %d\n", __func__, 187 urb->actual_length); 188 } else { 189 dev_dbg(&dev->udev->dev,"%s : read_buffer overflow\n", 190 __func__); 191 } 192 } 193 194 exit: 195 dev->read_urb_finished = 1; 196 spin_unlock_irqrestore(&dev->buflock, flags); 197 /* always wake up so we recover from errors */ 198 wake_up_interruptible(&dev->read_wait); 199 } 200 201 static void adu_interrupt_out_callback(struct urb *urb) 202 { 203 struct adu_device *dev = urb->context; 204 int status = urb->status; 205 unsigned long flags; 206 207 adu_debug_data(&dev->udev->dev, __func__, 208 urb->actual_length, urb->transfer_buffer); 209 210 if (status != 0) { 211 if ((status != -ENOENT) && 212 (status != -ESHUTDOWN) && 213 (status != -ECONNRESET)) { 214 dev_dbg(&dev->udev->dev, 215 "%s :nonzero status received: %d\n", __func__, 216 status); 217 } 218 return; 219 } 220 221 spin_lock_irqsave(&dev->buflock, flags); 222 dev->out_urb_finished = 1; 223 wake_up(&dev->write_wait); 224 spin_unlock_irqrestore(&dev->buflock, flags); 225 } 226 227 static int adu_open(struct inode *inode, struct file *file) 228 { 229 struct adu_device *dev = NULL; 230 struct usb_interface *interface; 231 int subminor; 232 int retval; 233 234 subminor = iminor(inode); 235 236 retval = mutex_lock_interruptible(&adutux_mutex); 237 if (retval) 238 goto exit_no_lock; 239 240 interface = usb_find_interface(&adu_driver, subminor); 241 if (!interface) { 242 pr_err("%s - error, can't find device for minor %d\n", 243 __func__, subminor); 244 retval = -ENODEV; 245 goto exit_no_device; 246 } 247 248 dev = usb_get_intfdata(interface); 249 if (!dev) { 250 retval = -ENODEV; 251 goto exit_no_device; 252 } 253 254 /* check that nobody else is using the device */ 255 if (dev->open_count) { 256 retval = -EBUSY; 257 goto exit_no_device; 258 } 259 260 ++dev->open_count; 261 dev_dbg(&dev->udev->dev, "%s: open count %d\n", __func__, 262 dev->open_count); 263 264 /* save device in the file's private structure */ 265 file->private_data = dev; 266 267 /* initialize in direction */ 268 dev->read_buffer_length = 0; 269 270 /* fixup first read by having urb waiting for it */ 271 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 272 usb_rcvintpipe(dev->udev, 273 dev->interrupt_in_endpoint->bEndpointAddress), 274 dev->interrupt_in_buffer, 275 usb_endpoint_maxp(dev->interrupt_in_endpoint), 276 adu_interrupt_in_callback, dev, 277 dev->interrupt_in_endpoint->bInterval); 278 dev->read_urb_finished = 0; 279 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL)) 280 dev->read_urb_finished = 1; 281 /* we ignore failure */ 282 /* end of fixup for first read */ 283 284 /* initialize out direction */ 285 dev->out_urb_finished = 1; 286 287 retval = 0; 288 289 exit_no_device: 290 mutex_unlock(&adutux_mutex); 291 exit_no_lock: 292 return retval; 293 } 294 295 static void adu_release_internal(struct adu_device *dev) 296 { 297 /* decrement our usage count for the device */ 298 --dev->open_count; 299 dev_dbg(&dev->udev->dev, "%s : open count %d\n", __func__, 300 dev->open_count); 301 if (dev->open_count <= 0) { 302 adu_abort_transfers(dev); 303 dev->open_count = 0; 304 } 305 } 306 307 static int adu_release(struct inode *inode, struct file *file) 308 { 309 struct adu_device *dev; 310 int retval = 0; 311 312 if (file == NULL) { 313 retval = -ENODEV; 314 goto exit; 315 } 316 317 dev = file->private_data; 318 if (dev == NULL) { 319 retval = -ENODEV; 320 goto exit; 321 } 322 323 mutex_lock(&adutux_mutex); /* not interruptible */ 324 325 if (dev->open_count <= 0) { 326 dev_dbg(&dev->udev->dev, "%s : device not opened\n", __func__); 327 retval = -ENODEV; 328 goto unlock; 329 } 330 331 adu_release_internal(dev); 332 if (dev->disconnected) { 333 /* the device was unplugged before the file was released */ 334 if (!dev->open_count) /* ... and we're the last user */ 335 adu_delete(dev); 336 } 337 unlock: 338 mutex_unlock(&adutux_mutex); 339 exit: 340 return retval; 341 } 342 343 static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, 344 loff_t *ppos) 345 { 346 struct adu_device *dev; 347 size_t bytes_read = 0; 348 size_t bytes_to_read = count; 349 int retval = 0; 350 int timeout = 0; 351 int should_submit = 0; 352 unsigned long flags; 353 DECLARE_WAITQUEUE(wait, current); 354 355 dev = file->private_data; 356 if (mutex_lock_interruptible(&dev->mtx)) 357 return -ERESTARTSYS; 358 359 /* verify that the device wasn't unplugged */ 360 if (dev->disconnected) { 361 retval = -ENODEV; 362 pr_err("No device or device unplugged %d\n", retval); 363 goto exit; 364 } 365 366 /* verify that some data was requested */ 367 if (count == 0) { 368 dev_dbg(&dev->udev->dev, "%s : read request of 0 bytes\n", 369 __func__); 370 goto exit; 371 } 372 373 timeout = COMMAND_TIMEOUT; 374 dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__); 375 while (bytes_to_read) { 376 size_t data_in_secondary = dev->secondary_tail - dev->secondary_head; 377 dev_dbg(&dev->udev->dev, 378 "%s : while, data_in_secondary=%zu, status=%d\n", 379 __func__, data_in_secondary, 380 dev->interrupt_in_urb->status); 381 382 if (data_in_secondary) { 383 /* drain secondary buffer */ 384 size_t amount = min(bytes_to_read, data_in_secondary); 385 if (copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount)) { 386 retval = -EFAULT; 387 goto exit; 388 } 389 dev->secondary_head += amount; 390 bytes_read += amount; 391 bytes_to_read -= amount; 392 } else { 393 /* we check the primary buffer */ 394 spin_lock_irqsave (&dev->buflock, flags); 395 if (dev->read_buffer_length) { 396 /* we secure access to the primary */ 397 char *tmp; 398 dev_dbg(&dev->udev->dev, 399 "%s : swap, read_buffer_length = %d\n", 400 __func__, dev->read_buffer_length); 401 tmp = dev->read_buffer_secondary; 402 dev->read_buffer_secondary = dev->read_buffer_primary; 403 dev->read_buffer_primary = tmp; 404 dev->secondary_head = 0; 405 dev->secondary_tail = dev->read_buffer_length; 406 dev->read_buffer_length = 0; 407 spin_unlock_irqrestore(&dev->buflock, flags); 408 /* we have a free buffer so use it */ 409 should_submit = 1; 410 } else { 411 /* even the primary was empty - we may need to do IO */ 412 if (!dev->read_urb_finished) { 413 /* somebody is doing IO */ 414 spin_unlock_irqrestore(&dev->buflock, flags); 415 dev_dbg(&dev->udev->dev, 416 "%s : submitted already\n", 417 __func__); 418 } else { 419 /* we must initiate input */ 420 dev_dbg(&dev->udev->dev, 421 "%s : initiate input\n", 422 __func__); 423 dev->read_urb_finished = 0; 424 spin_unlock_irqrestore(&dev->buflock, flags); 425 426 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 427 usb_rcvintpipe(dev->udev, 428 dev->interrupt_in_endpoint->bEndpointAddress), 429 dev->interrupt_in_buffer, 430 usb_endpoint_maxp(dev->interrupt_in_endpoint), 431 adu_interrupt_in_callback, 432 dev, 433 dev->interrupt_in_endpoint->bInterval); 434 retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); 435 if (retval) { 436 dev->read_urb_finished = 1; 437 if (retval == -ENOMEM) { 438 retval = bytes_read ? bytes_read : -ENOMEM; 439 } 440 dev_dbg(&dev->udev->dev, 441 "%s : submit failed\n", 442 __func__); 443 goto exit; 444 } 445 } 446 447 /* we wait for I/O to complete */ 448 set_current_state(TASK_INTERRUPTIBLE); 449 add_wait_queue(&dev->read_wait, &wait); 450 spin_lock_irqsave(&dev->buflock, flags); 451 if (!dev->read_urb_finished) { 452 spin_unlock_irqrestore(&dev->buflock, flags); 453 timeout = schedule_timeout(COMMAND_TIMEOUT); 454 } else { 455 spin_unlock_irqrestore(&dev->buflock, flags); 456 set_current_state(TASK_RUNNING); 457 } 458 remove_wait_queue(&dev->read_wait, &wait); 459 460 if (timeout <= 0) { 461 dev_dbg(&dev->udev->dev, 462 "%s : timeout\n", __func__); 463 retval = bytes_read ? bytes_read : -ETIMEDOUT; 464 goto exit; 465 } 466 467 if (signal_pending(current)) { 468 dev_dbg(&dev->udev->dev, 469 "%s : signal pending\n", 470 __func__); 471 retval = bytes_read ? bytes_read : -EINTR; 472 goto exit; 473 } 474 } 475 } 476 } 477 478 retval = bytes_read; 479 /* if the primary buffer is empty then use it */ 480 spin_lock_irqsave(&dev->buflock, flags); 481 if (should_submit && dev->read_urb_finished) { 482 dev->read_urb_finished = 0; 483 spin_unlock_irqrestore(&dev->buflock, flags); 484 usb_fill_int_urb(dev->interrupt_in_urb, dev->udev, 485 usb_rcvintpipe(dev->udev, 486 dev->interrupt_in_endpoint->bEndpointAddress), 487 dev->interrupt_in_buffer, 488 usb_endpoint_maxp(dev->interrupt_in_endpoint), 489 adu_interrupt_in_callback, 490 dev, 491 dev->interrupt_in_endpoint->bInterval); 492 if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL) != 0) 493 dev->read_urb_finished = 1; 494 /* we ignore failure */ 495 } else { 496 spin_unlock_irqrestore(&dev->buflock, flags); 497 } 498 499 exit: 500 /* unlock the device */ 501 mutex_unlock(&dev->mtx); 502 503 return retval; 504 } 505 506 static ssize_t adu_write(struct file *file, const __user char *buffer, 507 size_t count, loff_t *ppos) 508 { 509 DECLARE_WAITQUEUE(waita, current); 510 struct adu_device *dev; 511 size_t bytes_written = 0; 512 size_t bytes_to_write; 513 size_t buffer_size; 514 unsigned long flags; 515 int retval; 516 517 dev = file->private_data; 518 519 retval = mutex_lock_interruptible(&dev->mtx); 520 if (retval) 521 goto exit_nolock; 522 523 /* verify that the device wasn't unplugged */ 524 if (dev->disconnected) { 525 retval = -ENODEV; 526 pr_err("No device or device unplugged %d\n", retval); 527 goto exit; 528 } 529 530 /* verify that we actually have some data to write */ 531 if (count == 0) { 532 dev_dbg(&dev->udev->dev, "%s : write request of 0 bytes\n", 533 __func__); 534 goto exit; 535 } 536 537 while (count > 0) { 538 add_wait_queue(&dev->write_wait, &waita); 539 set_current_state(TASK_INTERRUPTIBLE); 540 spin_lock_irqsave(&dev->buflock, flags); 541 if (!dev->out_urb_finished) { 542 spin_unlock_irqrestore(&dev->buflock, flags); 543 544 mutex_unlock(&dev->mtx); 545 if (signal_pending(current)) { 546 dev_dbg(&dev->udev->dev, "%s : interrupted\n", 547 __func__); 548 set_current_state(TASK_RUNNING); 549 retval = -EINTR; 550 goto exit_onqueue; 551 } 552 if (schedule_timeout(COMMAND_TIMEOUT) == 0) { 553 dev_dbg(&dev->udev->dev, 554 "%s - command timed out.\n", __func__); 555 retval = -ETIMEDOUT; 556 goto exit_onqueue; 557 } 558 remove_wait_queue(&dev->write_wait, &waita); 559 retval = mutex_lock_interruptible(&dev->mtx); 560 if (retval) { 561 retval = bytes_written ? bytes_written : retval; 562 goto exit_nolock; 563 } 564 565 dev_dbg(&dev->udev->dev, 566 "%s : in progress, count = %zd\n", 567 __func__, count); 568 } else { 569 spin_unlock_irqrestore(&dev->buflock, flags); 570 set_current_state(TASK_RUNNING); 571 remove_wait_queue(&dev->write_wait, &waita); 572 dev_dbg(&dev->udev->dev, "%s : sending, count = %zd\n", 573 __func__, count); 574 575 /* write the data into interrupt_out_buffer from userspace */ 576 buffer_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); 577 bytes_to_write = count > buffer_size ? buffer_size : count; 578 dev_dbg(&dev->udev->dev, 579 "%s : buffer_size = %zd, count = %zd, bytes_to_write = %zd\n", 580 __func__, buffer_size, count, bytes_to_write); 581 582 if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write) != 0) { 583 retval = -EFAULT; 584 goto exit; 585 } 586 587 /* send off the urb */ 588 usb_fill_int_urb( 589 dev->interrupt_out_urb, 590 dev->udev, 591 usb_sndintpipe(dev->udev, dev->interrupt_out_endpoint->bEndpointAddress), 592 dev->interrupt_out_buffer, 593 bytes_to_write, 594 adu_interrupt_out_callback, 595 dev, 596 dev->interrupt_out_endpoint->bInterval); 597 dev->interrupt_out_urb->actual_length = bytes_to_write; 598 dev->out_urb_finished = 0; 599 retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); 600 if (retval < 0) { 601 dev->out_urb_finished = 1; 602 dev_err(&dev->udev->dev, "Couldn't submit " 603 "interrupt_out_urb %d\n", retval); 604 goto exit; 605 } 606 607 buffer += bytes_to_write; 608 count -= bytes_to_write; 609 610 bytes_written += bytes_to_write; 611 } 612 } 613 mutex_unlock(&dev->mtx); 614 return bytes_written; 615 616 exit: 617 mutex_unlock(&dev->mtx); 618 exit_nolock: 619 return retval; 620 621 exit_onqueue: 622 remove_wait_queue(&dev->write_wait, &waita); 623 return retval; 624 } 625 626 /* file operations needed when we register this driver */ 627 static const struct file_operations adu_fops = { 628 .owner = THIS_MODULE, 629 .read = adu_read, 630 .write = adu_write, 631 .open = adu_open, 632 .release = adu_release, 633 .llseek = noop_llseek, 634 }; 635 636 /* 637 * usb class driver info in order to get a minor number from the usb core, 638 * and to have the device registered with devfs and the driver core 639 */ 640 static struct usb_class_driver adu_class = { 641 .name = "usb/adutux%d", 642 .fops = &adu_fops, 643 .minor_base = ADU_MINOR_BASE, 644 }; 645 646 /* 647 * adu_probe 648 * 649 * Called by the usb core when a new device is connected that it thinks 650 * this driver might be interested in. 651 */ 652 static int adu_probe(struct usb_interface *interface, 653 const struct usb_device_id *id) 654 { 655 struct usb_device *udev = interface_to_usbdev(interface); 656 struct adu_device *dev = NULL; 657 int retval = -ENOMEM; 658 int in_end_size; 659 int out_end_size; 660 int res; 661 662 /* allocate memory for our device state and initialize it */ 663 dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL); 664 if (!dev) 665 return -ENOMEM; 666 667 mutex_init(&dev->mtx); 668 spin_lock_init(&dev->buflock); 669 dev->udev = usb_get_dev(udev); 670 init_waitqueue_head(&dev->read_wait); 671 init_waitqueue_head(&dev->write_wait); 672 673 res = usb_find_common_endpoints_reverse(interface->cur_altsetting, 674 NULL, NULL, 675 &dev->interrupt_in_endpoint, 676 &dev->interrupt_out_endpoint); 677 if (res) { 678 dev_err(&interface->dev, "interrupt endpoints not found\n"); 679 retval = res; 680 goto error; 681 } 682 683 in_end_size = usb_endpoint_maxp(dev->interrupt_in_endpoint); 684 out_end_size = usb_endpoint_maxp(dev->interrupt_out_endpoint); 685 686 dev->read_buffer_primary = kmalloc((4 * in_end_size), GFP_KERNEL); 687 if (!dev->read_buffer_primary) 688 goto error; 689 690 /* debug code prime the buffer */ 691 memset(dev->read_buffer_primary, 'a', in_end_size); 692 memset(dev->read_buffer_primary + in_end_size, 'b', in_end_size); 693 memset(dev->read_buffer_primary + (2 * in_end_size), 'c', in_end_size); 694 memset(dev->read_buffer_primary + (3 * in_end_size), 'd', in_end_size); 695 696 dev->read_buffer_secondary = kmalloc((4 * in_end_size), GFP_KERNEL); 697 if (!dev->read_buffer_secondary) 698 goto error; 699 700 /* debug code prime the buffer */ 701 memset(dev->read_buffer_secondary, 'e', in_end_size); 702 memset(dev->read_buffer_secondary + in_end_size, 'f', in_end_size); 703 memset(dev->read_buffer_secondary + (2 * in_end_size), 'g', in_end_size); 704 memset(dev->read_buffer_secondary + (3 * in_end_size), 'h', in_end_size); 705 706 dev->interrupt_in_buffer = kmalloc(in_end_size, GFP_KERNEL); 707 if (!dev->interrupt_in_buffer) 708 goto error; 709 710 /* debug code prime the buffer */ 711 memset(dev->interrupt_in_buffer, 'i', in_end_size); 712 713 dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); 714 if (!dev->interrupt_in_urb) 715 goto error; 716 dev->interrupt_out_buffer = kmalloc(out_end_size, GFP_KERNEL); 717 if (!dev->interrupt_out_buffer) 718 goto error; 719 dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); 720 if (!dev->interrupt_out_urb) 721 goto error; 722 723 if (!usb_string(udev, udev->descriptor.iSerialNumber, dev->serial_number, 724 sizeof(dev->serial_number))) { 725 dev_err(&interface->dev, "Could not retrieve serial number\n"); 726 retval = -EIO; 727 goto error; 728 } 729 dev_dbg(&interface->dev,"serial_number=%s", dev->serial_number); 730 731 /* we can register the device now, as it is ready */ 732 usb_set_intfdata(interface, dev); 733 734 retval = usb_register_dev(interface, &adu_class); 735 736 if (retval) { 737 /* something prevented us from registering this driver */ 738 dev_err(&interface->dev, "Not able to get a minor for this device.\n"); 739 usb_set_intfdata(interface, NULL); 740 goto error; 741 } 742 743 dev->minor = interface->minor; 744 745 /* let the user know what node this device is now attached to */ 746 dev_info(&interface->dev, "ADU%d %s now attached to /dev/usb/adutux%d\n", 747 le16_to_cpu(udev->descriptor.idProduct), dev->serial_number, 748 (dev->minor - ADU_MINOR_BASE)); 749 750 return 0; 751 752 error: 753 adu_delete(dev); 754 return retval; 755 } 756 757 /* 758 * adu_disconnect 759 * 760 * Called by the usb core when the device is removed from the system. 761 */ 762 static void adu_disconnect(struct usb_interface *interface) 763 { 764 struct adu_device *dev; 765 766 dev = usb_get_intfdata(interface); 767 768 usb_deregister_dev(interface, &adu_class); 769 770 usb_poison_urb(dev->interrupt_in_urb); 771 usb_poison_urb(dev->interrupt_out_urb); 772 773 mutex_lock(&adutux_mutex); 774 usb_set_intfdata(interface, NULL); 775 776 mutex_lock(&dev->mtx); /* not interruptible */ 777 dev->disconnected = 1; 778 mutex_unlock(&dev->mtx); 779 780 /* if the device is not opened, then we clean up right now */ 781 if (!dev->open_count) 782 adu_delete(dev); 783 784 mutex_unlock(&adutux_mutex); 785 } 786 787 /* usb specific object needed to register this driver with the usb subsystem */ 788 static struct usb_driver adu_driver = { 789 .name = "adutux", 790 .probe = adu_probe, 791 .disconnect = adu_disconnect, 792 .id_table = device_table, 793 }; 794 795 module_usb_driver(adu_driver); 796 797 MODULE_AUTHOR(DRIVER_AUTHOR); 798 MODULE_DESCRIPTION(DRIVER_DESC); 799 MODULE_LICENSE("GPL"); 800